The net/ipv4/route.c file declares some entries for proc
to dump some routing info. The reading functions are
scattered over this file - collect them together.
Besides, remove a useless IP_RT_ACCT_CPU macro.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous move of the the UDP inDatagrams counter caused each
peek of the same packet to be counted separately. This may be
undesirable.
This patch fixes this by adding a bit to sk_buff to record whether
this packet has already been seen through skb_recv_datagram. We
then only increment the counter when the packet is seen for the
first time.
The only dodgy part is the fact that skb_recv_datagram doesn't have
a good way of returning this new bit of information. So I've added
a new function __skb_recv_datagram that does return this and made
skb_recv_datagram a wrapper around it.
The plan is to eventually replace all uses of skb_recv_datagram with
this new function at which time it can be renamed its proper name.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous move of the the UDP inDatagrams counter caused the
counting of encapsulated packets, SUNRPC data (as opposed to call)
packets and RXRPC packets to go missing.
This patch restores all of these.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it is possible for two processes to peek on the same socket
and end up incrementing the error counter twice for the same packet.
This patch fixes it by making skb_kill_datagram return whether it
succeeded in unlinking the packet and only incrementing the counter
if it did.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only difference in this case is that updating all.forwarding
causes the update in default.forwarding when done via proc, but
not via the system call.
Besides, this consolidates a good portion of code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
AFAIS these two entries should do the same thing - change the
forwarding state on ipv4_devconf and on all the devices.
I propose to merge the handlers together using ctl paths.
The inet_forward_change() is static after this and I move
it higher to be closer to other "propagation" helpers and
to avoid diff making patches based on { and } matching :)
i.e. - make them easier to read.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have already done this for core, ipv4 and tr tables, so repeat this
for the ipv6 ones.
This makes the ipv6.ko smaller and creates the ground needed for net
namespaces support in ipv6.ko ssctls.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since this file is entirely enclosed with the
#ifdef CONFIG_SYSCTL/#endif pair, it's OK to move this
CONFIG_ into a Makefile.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have removed all the entries from this table (core_table,
ipv4_table and tr_table), so now we can safely drop it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The same thing for token-ring - use ctl paths and get
rid of external references on the tr_table.
Unfortunately, I couldn't split this patch into cleanup and
use-the-paths parts.
As a lame excuse I can say, that the cleanup is just moving
the tr_table from one file to another - closet to a single
variable, that this ctl table tunes. Since the source file
becomes empty after the move, I remove it.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the same as I did for the net/core/ table in the
second patch in his series: use the paths and isolate the
whole table in the .c file.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This includes several cleanups:
* tune Makefile to compile out this file when SYSCTL=n. Now
it looks like net/core/sysctl_net_core.c one;
* move the ipv4_config to af_inet.c to exist all the time;
* remove additional sysctl_ip_nonlocal_bind declaration
(it is already declared in net/ip.h);
* remove no nonger needed ifdefs from this file.
This is a preparation for using ctl paths for net/ipv4/
sysctl table.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using ctl paths we can put all the stuff, related to net/core/
sysctl table, into one file and remove all the references on it.
As a good side effect this hides the "core_table" name from
the global scope :)
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This file is already compiled out when the SYSCTL=n, so
these ifdefs, that enclose the whole file, can be removed.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the NF_CONNTRACK_ENABLED option. It was meant for a smoother upgrade
to nf_conntrack, people having reconfigured their kernel at least once since
ip_conntrack was removed will have the NF_CONNTRACK option already set.
People upgrading from older kernels have to reconfigure a lot anyway.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The queueing core doesn't care about the exact return value from
the queue handler, so there's no need to go through the trouble
of returning a meaningful value as long as we indicate an error.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need a default case in nfqnl_build_packet_message(), the
copy_mode is validated when it is set. Tell the compiler about
the possible types and remove the default case. Saves 80b of
text on x86_64.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally I wanted to just remove the QDEBUG macro and use pr_debug, but
none of the messages seems worth keeping.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
nfqnl_set_mode takes the queue lock and calls __nfqnl_set_mode. Just move
the code from __nfqnl_set_mode to nfqnl_set_mode since there is no other
user.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use RCU for queue instances hash. Avoids multiple atomic operations
for each packet.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The peer_pid must be checked in all cases when a queue exists, currently
it is not checked if for NFQA_CFG_QUEUE_MAXLEN when a NFQA_CFG_CMD
attribute exists in some cases. Same for the queue existance check,
which can cause a NULL pointer dereference.
Also consistently return -ENODEV for "queue not found". -ENOENT would
be better, but that is already used to indicate a queued skb id doesn't
exist.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sequence counter doesn't need to be an atomic_t, just move the increment
inside the locked section.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't log "nf_hook: Verdict = QUEUE." message with NETFILTER_DEBUG=y.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move duplicated error handling to end of function and add a helper function
to release the device and module references from the queue entry.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that issue_verdict doesn't need to free the queue entries anymore,
all it does is disable local BHs and call nf_reinject. Move the BH
disabling to the okfn invocation in nf_reinject and kill the
issue_verdict functions.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move common fields for queue management to struct nf_info and rename it
to struct nf_queue_entry. The avoids one allocation/free per packet and
simplifies the code a bit.
Alternatively we could add some private room at the tail, but since
all current users use identical structs this seems easier.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Resync dev_cmp to take bridge devices into account.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
A queue entry lookup currently looks like this:
ipq_find_dequeue_entry -> __ipq_find_dequeue_entry ->
__ipq_find_entry -> cmpfn -> id_cmp
Use simple open-coded list walking and kill the cmpfn for
ipq_find_dequeue_entry. Instead add it to ipq_flush (after
similar cleanups) and use ipq_flush for both complete flushes
and flushing entries related to a device.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
A queue entry lookup currently looks like this:
ipq_find_dequeue_entry -> __ipq_find_dequeue_entry ->
__ipq_find_entry -> cmpfn -> id_cmp
Use simple open-coded list walking and kill the cmpfn for
ipq_find_dequeue_entry. Instead add it to ipq_flush (after
similar cleanups) and use ipq_flush for both complete flushes
and flushing entries related to a device.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
A queue entry lookup currently looks like this:
find_dequeue_entry -> __find_dequeue_entry ->
__find_entry -> cmpfn -> id_cmp
Use simple open-coded list walking and kill the cmpfn for
find_dequeue_entry. Instead add it to nfqnl_flush (after
similar cleanups) and use nfqnl_flush for both complete
flushes and flushing entries related to a device.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use list_add_tail/list_for_each_entry instead of list_add and
list_for_each_prev as a preparation for switching to RCU.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the data pointer from struct nf_queue_handler. It has never been used
and is useless for the only handler that really matters, nfnetlink_queue,
since the handler is shared between all instances.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We hold a module reference for each queued packet, so the hook that
queued the packet can't disappear. Also remove an obsolete comment
stating the opposite.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clean up
if (x) y;
constructs. We've got nothing to hide :)
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
nf_conntrack_h323 needs ip6_route_output for the call forwarding filter.
Add a ->route function to nf_afinfo and use that to avoid pulling in the
ipv6 module.
Fix the #ifdef for the IPv6 code while I'm at it - the IPv6 support is
only needed when IPv6 conntrack is enabled.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch from ipv6_find_hdr to ipv6_skip_exthdr to avoid pulling in ip6_tables
and ipv6 when only using it for IPv4.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Log GID in addition to UID
Signed-off-by: Maciej Soltysiak <maciej.soltysiak@ae.poznan.pl>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rate estimator match. The rate estimator match can match on
estimated rates by the RATEEST target. It supports matching on
absolute bps/pps values, comparing two rate estimators and matching
on the difference between two rate estimators.
This is what I use to route outgoing data connections from a FTP
server over two lines based on the available bandwidth:
# estimate outgoing rates
iptables -t mangle -A POSTROUTING -o eth0 -j RATEEST --rateest-name eth0 \
--rateest-interval 250ms \
--rateest-ewma 0.5s
iptables -t mangle -A POSTROUTING -o ppp0 -j RATEEST --rateest-name ppp0 \
--rateest-interval 250ms \
--rateest-ewma 0.5s
# mark based on available bandwidth
iptables -t mangle -A BALANCE -m state --state NEW \
-m helper --helper ftp \
-m rateest --rateest-delta \
--rateest1 eth0 \
--rateest-bps1 2.5mbit \
--rateest-gt \
--rateest2 ppp0 \
--rateest-bps2 2mbit \
-j CONNMARK --set-mark 0x1
iptables -t mangle -A BALANCE -m state --state NEW \
-m helper --helper ftp \
-m rateest --rateest-delta \
--rateest1 ppp0 \
--rateest-bps1 2mbit \
--rateest-gt \
--rateest2 eth0 \
--rateest-bps2 2.5mbit \
-j CONNMARK --set-mark 0x2
iptables -t mangle -A BALANCE -j CONNMARK --restore-mark
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new rate estimator target (using gen_estimator). In combination with
the rateest match (next patch) this can be used for load-based multipath
routing.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the ipt_SAME target as scheduled in feature-removal-schedule.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pavel Emelyanov
Patrick McHardy