The last patch forgot to add the driver to the Makefile, so it
would not end up getting built. This resolves that issue.
Cc: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This change adds the Kconfig and Make file for TI's
ST line discipline driver and the BlueZ driver for BT
core of the TI BT/FM/GPS combo chip.
Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
The Intel Restricted Access Region Handler provides a buffer allocation
mechanism to RAR users. Since the intended usage model is to lock out
CPU access to RAR (the CPU will not be able to access RAR memory), this
driver does not access RAR memory, and merely keeps track of what areas
of RAR memory are in use. It has it's own simple allocator that does
not rely on existing kernel allocators (SLAB, etc) since those
allocators are too tightly coupled with the paging mechanism, which isn't
needed for the intended RAR use cases.
An mmap() implementation is provided for debugging purposes to simplify
RAR memory access from the user space. However, it will effectively be
a no-op when RAR access control is enabled since the CPU will not be
able to access RAR.
This driver should not be confused with the rar_register driver. That
driver exposes an interface to access RAR registers on the Moorestown
platform. The RAR handler driver relies on the rar_register driver for
low level RAR register reads and writes.
This patch was generated and built against the latest linux-2.6 master
branch.
Signed-off-by: Ossama Othman <ossama.othman@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove staging/poch.
Reasons for removal are -- The driver has serious cache
issues, that I couldn't fix. The card vendor is working
on a better replacement for the driver. The driver has
been delayed a lot and development has come to a stand
still.
Signed-off-by: Vijay Kumar B. <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Obviously still needs serious attention, but it compiles.
Original author: Rick Dobbs
Add driver to support wanPMC-CxT1E1 card.
This card provides 1-4 ports of T1E1 in PMC form factor.
Note, Rick doesn't want his email showing up as the "From:" author, but
has given his blessing to have the code included in the kernel tree.
Signed-off-by: Bob Beers <bob.beers@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Renames the directory in which the driver files
are located; again for clarity.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It turns out that Mimio has a userspace solution for this product using
libusb, and the in-kernel driver is just getting in the way now and
causing problems. So they have asked that the in-kernel driver be
removed. As the staging driver wasn't quite working anyway, and Mimio
supports their libusb solution for all distros, I am removing the
in-kernel driver.
The libusb solution can be downloaded from:
http://www.mimio.com/downloads/mimio_studio_software/linux.asp
Cc: <mwilder@cs.nmsu.edu>
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: Marc Rousseau <Marc.Rousseau@mimio.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch supersedes the earlier ones sent by Manu Abraham to add
the Broadcom Crystal HD driver to the staging tree, per discussion
with him about it. I've been working with Broadcom's Naren Sankar
on this driver for a number of months, and had already talked Naren
about submitting this on Broadcom's behalf, didn't expect anyone
else to jump on submitting it as quickly as Manu did. ;)
This version is a one-shot deal, incorporating the original driver,
Manu's coding style clean-ups, udev device creation support from
Edgar 'gimli' Hucek, and a number of other small tweaks from myself
and Scott Davilla, the other individual who has been working closely
on this code with Naren and I.
I've tested this iteration of the code lightly on a mini pci-e board
in a ThinkPad T61p running x86_64 Fedora 12, with the expected results,
and will test further on other systems with other variants of the card
(I have three varieties of this device currently in hand). Scott has
also tested on assorted primarily i686 varieties of Ubuntu, and Naren
has tested with both Fedora and Ubuntu, iirc.
Note: only the 70012 is currently supported by this driver, 70015
support will follow later. Also note that Blu-Ray support isn't
enabled (at the firmware level), due to misc fun related to the
BD encryption scheme, DRM, etc. :\
I *do* have a git tree containing the driver, lib, gst plugin and
firmware that I'm working from at the moment[*], as there are inter-
dependencies between the driver and lib, and the driver can be used
with kernels going a ways back (I've only tested back to 2.6.18 as
it exists in Red Hat Enterprise Linux 5). I'm exporting from there,
into a linux-next tree, then generating patches from there. The goal
is to feed everything upstream as quickly as possible, but there are
users who want this code for earlier kernels too...
The firmware will be submitted for inclusion in dwmw2's linux-firmware
tree once there is a suitable redistribution-no-modification type of
license on it (I believe Naren is working with Broadcom legal to get
that in place).
Changelog from initial Broadcom release to here:
commit d20475d444610c5683d09e63f707f5bb22359062
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:55:16 2010 -0500
include: lib doesn't build w/o the removed stdint include
So add it back...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c181070a330530b792d2b80e3ec6ab12a5a57394
Author: Scott Davilla <davilla@4pi.com>
Date: Mon Jan 4 13:38:37 2010 -0500
include: don't define VOID if its already defined
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 33d8a2b691e81212e398f53770578d79650bf0bc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 13:12:10 2010 -0500
driver: create crystalhd device using udev
Based on:
http://sourceforge.net/apps/trac/archvdr/browser/trunk/archvdr/crystalhd/use_udev.patch
Signed-off-by: Edgar ( gimli ) Hucek <ebsi4711 at gmail dot com>
Formatting tweaks, error-handling path fixups and any bugs added by Jarod.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit c44c64dea5537814796fcbe2d9db0209383c78b9
Author: Manu Abraham <abraham.manu@gmail.com>
Date: Mon Jan 4 10:32:47 2010 -0500
crystalhd: coding style cleanups
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit cffa6da7467ff697a656d1dfff54bb0513a053dc
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:17:27 2010 -0500
crystalhd: run dos2unix over everything, this is linux source...
Signed-off-by: Jarod Wilson <jarod@redhat.com>
commit 7fa38a282db7af5a5746055f7c6cef8a9b8ee138
Author: Jarod Wilson <jarod@redhat.com>
Date: Mon Jan 4 10:02:33 2010 -0500
crystalhd: initial import of released Broadcom code
Straight import of:
http://www.broadcom.com/docs/support/crystalhd/crystalhd_linux_20091229.zip
Unfortunately, we're unable to publicly publish all the history that got
us from the initial internal code to what was released here, but such is
life, we can just be happy we've got this open-sourced now. :)
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Naren Sankar <nsankar@broadcom.com>
Signed-off-by: Scott Davilla <davilla@4pi.com>
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one seems to be able to maintain this, or merge it into mainline, so
remove it.
Acked-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one seems to be maintaining this anymore, and it is not on any
track to be merged to mainline.
Cc: Ashwin Ganti <ashwin.ganti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It has no users, and no developers to maintain it to get
it merged into mainline.
So sad.
Cc: Daniel Drake <ddrake@brontes3d.com>
Cc: Justin Bronder <jsbronder@brontes3d.com>
Cc: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
DST is dead, no one is using it and upstream
has abandoned it, so remove it from the tree because
it is not going anywhere.
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Yeeloong netbook has a sm712 video card, need this driver, but it is not
ready to upstream yet, so, go to drivers/staing at first.
This source code is originally from Silicon Motion Technology Corp, and
maintained at http://dev.lemote.com/code/linux_loongson for YeeLoong
netbook. I have done a lot of cleanups for it and merged it into my git
repository at http://dev.lemote.com/code/rt4ls.
Thanks to Simon for testing it on a little-endian x86 platform.
Thanks to Olivier Croset <olivier.croset@actis-computer.com> for
reporting the problem about __BIG_ENDIAN compiling problem and send a
relative patch.
The suspend/resume and blank support are contributed by Jason from
Silicon Motion Technology.
Tested-by: Simon Braunschmidt <sbraun@emlix.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a drive for the Samsung N128 laptop to control the wireless LED
and backlight.
Many thanks to Joey Lee for his help in testing and finding all of my
bugs in the development of this driver, it has been invaluable.
Cc: Joey Lee <jlee@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is
a routing protocol for multi-hop ad-hoc mesh networks. The
networks may be wired or wireless. See
http://www.open-mesh.org/ for more information and user space
tools.
This is the first submission for inclusion in staging.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add it to staging Kbuild and fixes some API differences that prevents
compilation.
It seems that the ieee80211 stack is very close to rtl8192su one.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These drivers are no longer being developed and the original authors
seem to have abandonded them and hence, do not want them in the mainline
kernel tree.
So sad :(
Cc: Brian Swetland <swetland@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that active development has begun on a mainline version of
a driver for the RTL8187SE that should be called rtl8187se, there
is a conflict with the driver in staging with the same name.
To solve the conflict, rename the driver in staging to r8187se.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
WLAN driver for cards using the HERMES II and HERMES II.5 chipset
Based on Agere Systems Linux LKM Wireless Driver Source Code,
Version 7.22; complies with Open Source BSD License.
The software is a modified version of wl_lkm_722_abg.tar.gz from the
Agere Systems website, addapted for Ubuntu 9.04 and modified to
fit in the current Linux kernel (2.6.31).
Modified for kernel 2.6 by Henk de Groot <pe1dnn@amsat.org>
Based on 7.18 version by Andrey Borzenkov <arvidjaar@mail.ru> $Revision: 39 $
Signed-off-by: Henk de Groot <pe1dnn@amsat.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Creates RAM based block devices (/dev/ramzswapX) which can be
used (only) as swap disks. Pages swapped to these are compressed
and stored in memory itself.
The module is called ramzswap.ko. It depends on:
- xvmalloc memory allocator (compiled with this driver)
- lzo_compress.ko
- lzo_decompress.ko
See ramzswap.txt for usage details.
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It's no longer needed as the p54spi driver is the same thing,
under a different name and in the correct portion of the kernel tree.
Cc: Javier Martinez Canillas <martinez.javier@gmail.com>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Move the netwave driver to drivers/staging. This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist. This driver
represents unnecessary ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Move the wavelan driver to drivers/staging. This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist. This driver
represents unnecessary ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Move the arlan driver to drivers/staging. This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist. This driver
represents unnecessary ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Move the strip ("Starmode Radio IP") driver to drivers/staging. For
several years this driver has only seen API "bombing-run" changes, and
few people ever had the hardware. This driver represents unnecessary
ongoing maintenance for no clear benefit.
This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The author has found a number of problems with the current version
of this driver in the current kernel, and is reworking it to get
things working again. Because of that, it would be better to remove
the driver now and add it back in a future kernel release.
Cc: H.J. Thomassen <hjt@ATComputing.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The agnx driver in the staging tree is broken, does not work, and
development is dead. The developers have asked for it to be removed
so it now is.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch prepares replacing the staging driver cpc-usb with the new
developed ems_usb CAN driver.
Signed-off-by: Sebastian Haas <haas@ems-wuensche.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunatly, the upstream company has abandonded development of this
driver. So it's best to just remove the driver from the tree.
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Intel has officially abandoned this project and does not want to
maintian it or have it included in the main kernel tree, as no one
should use the code, it's not needed anymore.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There is already an in-kernel driver for this hardware (since 2.6.30),
at76c50x-usb, and it supports all of the same devices. So this driver
can now be deleted.
Acked-by: Kalle Valo <kalle.valo@iki.fi>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
No one cares, it's a custom userspace interface, and the code hasn't
built in a long time. So remove it.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi drivers should be used instead, no need to have
these in here as well.
Cc: David Kiliani <mail@davidkiliani.de>
Cc: Meilhaus Support <support@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The comedi drivers should be used instead, no need to have
this driver in the tree duplicating that one.
Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that the code can build, let's add it to the build system.
Cc: "H.J. Thomassen" <hjt@ATComputing.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This wireless driver should work for the Realtek 8192 PCI devices.
It comes directly from Realtek and has been tested to work on at least
one laptop in the wild.
Cc: Anthony Wong <awong1@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Upstream revision 3 of the security processor kernel driver;
now located in drivers/staging
This revision adds an initial TODO file
This driver no longer requires to have the firmware compiled in
it with the CONFIG_EXTRA_FIRMWARE configuration option.
Furthermore, we now have the right to distribute the firmware
binaries.
This is the Linux kernel driver for the Security Processor, which is
a hardware device the provides cryptographic, secure storage, and
key management services.
Please be aware that this patch does not contain any encryption
algorithm. It only transports data to and from user space
applications to the security processor.
Signed-off-by: Mark Allyn <mark.a.allyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that a "real" driver is in the libata tree for this hardware, we need
to remove the staging driver as it is no longer needed.
Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is no longer maintained upstream, and no one cares about it at all,
so delete it.
The fact that it is duplicating an existing network driver also is a
good reason to remove it, it's causing nothing but trouble right now.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Turns out the m68k arch already has a CONFIG_VME, so use
CONFIG_VME_BUS instead.
Thanks to Geet Uytterhoeven for pointing this out.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This framework aims to colelese, extend and improve the VME Linux
drivers found at vmelinux.org, universe2.sourceforge.net and
openfmi.net/frs/?group_id=144. The last 2 drivers appear to be forks of
the original code found at vmelinux.org though have extended the
codebase.
Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Separate Kconfig/Makefile glue from dream into subdirectory. I plan to
add few more drivers, and changing staging/Makefile each time sounds
like inviting conflicts.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.
Signed-off-by: Richard Ash <richard@audacityteam.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the vendor driver for the Ralink RT3090 chipset.
It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.
[ Unfortunately since it follows the same design/implementation like
rt{286,287,307}0 drivers (already present in the staging tree)
it is highly unlikely that it will see much love from the wireless
development community.. ]
However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.
I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups. More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver is not needed, as the existing mos7840 driver works
properly for this device.
Thanks to Russell Lang for doing the work to figure this out.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Now that Bill rewrote the driver "properly", this old thing can be removed.
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver from Realtek for the Realtek RTL8192 USB wifi device
Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs. These SOCs are
multi-core mips64 processors with existing support over in arch/mips.
The driver files can be categorized into three basic groups:
1) Register definitions, these are named cvmx-*-defs.h
2) Main driver code, these have names that don't start cvmx-.
3) Interface specific functions and other utility code, names starting
with cvmx-
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add support for all Quatech usb to serial devices.
Based on an original driver from Quatech.
Cleaned up and forward ported by me.
It's a mess, uses it's own tty layer interface, and the coding style is
horrible.
Cc: Tim Gobeli <tgobeli@quatech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the line6 driver to the build system.
Cc: Markus Grabner <grabner@icg.tugraz.at>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the Ralink RT3070 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system, fixed lots of build issues, forward
ported to the current kernel version, and other minor cleanups were all
done by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The Intel Management Engine Interface (aka HECI: Host Embedded
Controller Interface ) enables communication between the host OS and
the Management Engine firmware. MEI is bi-directional, and either the
host or Intel AMT firmware can initiate transactions.
The core hardware architecture of Intel Active Management Technology
(Intel AMT) is resident in firmware. The micro-controller within the
chipset's graphics and memory controller (GMCH) hub houses the
Management Engine (ME) firmware, which implements various services
on behalf of management applications.
Some of the ME subsystems that can be access via MEI driver:
- Intel(R) Quiet System Technology (QST) is implemented as a firmware
subsystem that runs in the ME. Programs that wish to expose the
health monitoring and fan speed control capabilities of Intel(R) QST
will need to use the MEI driver to communicate with the ME sub-system.
- ASF is the "Alert Standard Format" which is an DMTF manageability
standard. It is implemented in the PC's hardware and firmware, and is
managed from a remote console.
Most recent Intel desktop chipsets have one or more of the above ME
services. The MEI driver will make it possible to support the above
features on Linux and provides applications access to the ME and it's
features.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Marcin Obara <marcin.obara@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Basically, update driver to run with 2.6.28
- Conversion from struct class_device to struct device.
- Conversion from .nopfn to .fault in vm_operations_struct.
- Update use of pci_resource_flags to check for IORESOURCE_SIZEALIGN.
- Update use of pci_dma_mapping_error.
- Minor code cleanup and integration with kernel build system.
Signed-off-by: Justin Bronder <jsbronder@brontes3d.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Many thanks to Russell Lang <gsview@ghostgum.com.au> for his
help in getting this working on newer kernel versions and
for pointing out this driver in the first place.
Cc: Russell Lang <gsview@ghostgum.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a new driver called stlc45xx, which supports wi-fi chipsets
stlc4550 and stlc4560 from ST-NXP Wireless. The chipset can be found, for
example, from Nokia N800 and N810 products.
The driver is implemented based on the firmware interface information
published by ST-NXP Wireless here:
http://wireless.kernel.org/en/developers/Documentation/specs#STMicroelectronicshardware
Currently only SPI interface is supported.
Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds Kconfig and Makefile entries and exports to
VFS functions to be used by POHMELFS.
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The benet driver is now in the proper place in drivers/net/benet, so we
can remove the staging version.
Acked-by: Sathya Perla <sathyap@serverengines.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This prepares us to start adding the android drivers
to the build.
The dummy android.c file will go away in the next few patches, as it
will not be needed once drivers/staging/android/ has a driver in it.
Cc: Robert Love <rlove@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the openPOWERLINK network stack from systec electronic.
It's a bit messed up as there is a driver mixed into the
middle of it, lots of work needs to be done to unwind the
different portions to make it sane.
Cc: Daniel Krueger <daniel.krueger@systec-electronic.com>
Cc: Ronald Sieber <Ronald.Sieber@systec-electronic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the Ralink RT2870 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system and cleaned up a bit already by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds the Mimio Xi interactive whiteboard driver to the tree.
It was originally written by mwilder@cs.nmsu.edu, but cleaned up and
forward ported by me to the latest kernel version.
Cc: Phil Hannent <phil@hannent.co.uk>
Cc: <mwilder@cs.nmsu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adds the driver for the Princeton Instruments USB camera.
Needs a lot of work...
TODO:
- make checkpatch.pl clean
- coding style fixups (typedefs, etc.)
- get it to build properly
- audit ioctls
- remove ioctls if possible
- assign proper minor number
- remove dbg() macro
- lots of general cleanups
- review locking
Cc: Judd Montgomery <judd@jpilot.org>
Cc: Jeff Frontz <jeff.frontz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for the Realtek 8187 "SE" wireless PCI devices in some
netbook computers (MSI Wind, and others). It includes its own copy of
the ieee80211 stack, but it is compiled into the driver to prevend
duplicate symbol issues.
This version comes from Ralink with no authorship, but it is based
on an old version of the rtl8180 driver from Andrea Merello. It was
hacked up a bit to get it to build properly within the kernel tree and
to properly handle the merged wireless stack within the driver.
Cc: Andrea Merello <andreamrl@tiscali.it>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Altera PCI Express Chaining DMA driver
A reference driver that exercises the Chaining DMA logic reference
design generated along the Altera FPGA PCI Express soft or hard core,
only if instantiated using the MegaWizard, not the SOPC builder, of
Quartus 8.1.
This driver can be used to test the logic instantiation and PCI
Express layers and acts as a starting point for driving custom logic
connected to the PCI Express End Point Chaining DMA engines.
Signed-off-by: Leon Woestenberg <leon@sidebranch.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the lcd-panel parallel port driver to the staging tree.
See the file, drivers/staging/panel/TODO for what needs to be fixed up
in order for this to be properly merged into the rest of the kernel
tree.
Cc: Willy Tarreau <w@1wt.eu>
Cc: Frank Menne <frank.menne@hsm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
and Krzysztof Gantzke <k.gantzke@meilhaus.de>
This is the drv/lnx/mod directory of ME-IDS 1.2.9 tarball with
some files from drv/lnx/include.
Signed-off-by: David Kiliani <mail@davidkiliani.de>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Cc: Krzysztof Gantzke <k.gantzke@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver for the OLED tiny display on some Asus laptops.
From: Jakub Schmidtke <sjakub@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the Comedi core to the staging tree.
This is a data acquision infrastructure for Linux, providing a common
interface for these types of drivers.
Taken directly from the comedi git tree, with only minor tweaks
by Greg to get it to build properly within the kernel tree.
From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the Ralink RT2860 driver from the company that does horrible
things like reading a config file from /etc. However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).
So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.
Ported to the Linux build system and cleaned up a bit already by me.
Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Initial dump of the otus USB wireless network driver.
It builds properly, but a lot of work needs to be done cleaning
it up before it can be merged into the wireless driver tree.
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first cut at a driver for the Redrapids Pocket Change
CardBus devices.
Receiving data seems to work properly, but overflows happen on transmit.
Still needs more hardware debugging to work properly.
(cleaned up to use proper driver core api functions by Greg)
From: Vijay Kumar <vijaykumar@bravegnu.org>
Cc: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Ken Sienski <sienski@redrapids.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the at76_usb wireless driver to the staging tree while the
other kernel driver (out of tree) gets rewritten to use the internal
wireless stack.
This patch comes directly from the Fedora kernel tree, with only the
directory placement of the files changed.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is needed as CONFIG_STAGING is set to y, yet there is no code in
drivers/staging/ to build, so the build-in.o doesn't get created
properly. Create a "dummy" module in drivers/staging called staging.c
to work around this bug.
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is used by mISDN and Zaptel drivers.
From: Steve Underwood <steveu@coppice.org>
From: David Rowe <david@rowetel.com>
Cc: Tzafrir Cohen <tzafrir.cohen@xorcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the wlan-ng prism2 USB driver to the drivers/staging tree.
The code was originally written by the linux-wlan-ng team, patched by
some Novell engineers to properly work on newer kernels, and then hacked
into place in order to get it to build properly in a single subdirectory
within the kernel tree by me.
It supports a wide range of older USB prism2 devices, and contains a
80211 stack to support this single driver.
Cc: Christian Zoz <zoz@suse.de>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: linux-wireless <linux-wireless@vger.kernel.org>
Cc: John Linville <linville@tuxdriver.com>
Cc: Helmut Schaa <helmut.schaa@googlemail.com>
Cc: linux-wlan-ng <solomon@linux-wlan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is driver for w35und usb wifi -- also in kohjinsha
subnotebook. It should work well enough to associate and ping, but it
obviously needs to be rewritten two more times...
OTOH worst horrors (like embedded wifi stack) should have been fixed
already...
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the common functions needed by both the host and client side
of the USB/IP code.
Brian Merrell cleaned up a lot of this code and submitted it for
inclusion. Greg also did a lot of cleanup.
Signed-off-by: Brian G. Merrell <bgmerrell@novell.com>
Cc: Takahiro Hirofuchi <hirofuchi@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Todo:
- checkpatch.pl cleanups
- sparse cleanups
- lots of little modules, should be merged together
and added to the build.
- testing?
- handle churn in v4l layer.
Many thanks to Ross Cohen <rcohen@snurgle.org> for cleanup patches on
this driver.
Cc: Ross Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Originally written by Guenter Gebhardt <g.gebhardt@meilhaus.de>
TODO:
- checkpatch.pl cleanups
- sparse cleanups
- possible /proc interaction cleanups
- more info needed for Kconfig entry
- real device id?
- module parameter cleanup
Cc: Wolfgang Beiter <w.beiter@aon.at>
Cc: Guenter Gebhardt <g.gebhardt@meilhaus.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is the first rough cut at a driver for the Alacritech SLIC
Technology Non-Accelerated 10Gbe network driver
TODO:
- lindent the code
- remove typedefs
- remove wrappers
- checkpatch.pl cleanups
- new functionality that the card needs
Cc: Christopher Harrer <charrer@alacritech.com>
Cc: Michael Miles <mmiles@alacritech.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This adds the Alacritech slicoss driver to the tree.
This driver is supposed to support:
Mojave cards (single port PCI Gigabit) both copper and fiber
Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
The driver was acutally tested on Oasis and Kalahari cards.
TODO:
- move firmware loading to request_firmware()
- remove direct memory access of structures
- any remaining sparse and checkpatch.pl warnings
- any netdev recommended changes
Many thanks to Lior Dotan <liodot@gmail.com> for help with the cleanup
of this driver.
Cc: Lior Dotan <liodot@gmail.com>
Cc: Christopher Harrer <charrer@alacritech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a driver for the ET1310 network device.
Based on the driver found at https://sourceforge.net/projects/et131x/
Cleaned up immensely by Olaf Hartman <o.hartmann@telovital.com> and Christoph
Hellwig <hch@infradead.org>
Note, the powermanagement options were removed from the vendor provided
driver as they did not build properly at the time.
TODO:
- kernel coding style cleanups
- forward port for latest network driver changes
- kill useless typecasts (e.g. in et1310_phy.c)
- alloc_etherdev is initializing memory with zero?!?
- add_timer call in et131x_netdev.c is correct?
- Add power saving functionality (suspend, sleep, resume)
- Implement a few more kernel Parameter (set mac )
Cc: Olaf Hartmann <o.hartmann@telovital.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dean Adams <dadams1969@gmail.com>
Cc: Victor Soriano <vjsoriano@agere.com>
Cc: Andre-Sebastian Liebe <andre@lianse.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
