dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

13 Commits

Author SHA1 Message Date
Ryusuke Konishi 55480a06e9 nilfs2: remove spaces before tabs
This kills the following checkpatch warnings:

 WARNING: please, no space before tabs
 #74: FILE: segment.h:74:
 +^Iunsigned ^I^Iflags;$

 WARNING: please, no space before tabs
 #35: FILE: segbuf.c:35:
 +^Iint ^I^I^Istart, end; /* The region to be submitted */$

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi 7a65004bba nilfs2: fix various typos in comments
This fixes various typos I found in comments of nilfs2.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-03-14 10:29:51 +09:00
Ryusuke Konishi dcd7618695 nilfs2: get rid of nilfs_segctor_req struct
This will clean up nilfs_segctor_req struct and the obscure request
argument passed among private methods of segment constructor.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-02-13 12:26:03 +09:00
Ryusuke Konishi a694291a62 nilfs2: separate wait function from nilfs_segctor_write
This separates wait function for submitted logs from the write
function nilfs_segctor_write().  A new list of segment buffers
"sc_write_logs" is added to hold logs under writing, and double
buffering is partially applied to hide io latency.

At this point, the double buffering is disabled for blocksize <
pagesize because page dirty flag is turned off during write and dirty
buffers are not properly collected for pages crossing over segments.

To receive full benefit of the double buffering, further refinement is
needed to move the io wait outside the lock section of log writer.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-11-30 21:17:52 +09:00
Ryusuke Konishi 654137dd46 nilfs2: remove header file for segment list operations
This will eliminate obsolete list operations of nilfs_segment_entry
structure which has been used to handle mutiple segment numbers.

The patch ("nilfs2: remove list of freeing segments") removed use of
the structure from the segment constructor code, and this patch
simplifies the remaining code by integrating it into recovery.c.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi 071cb4b819 nilfs2: eliminate removal list of segments
This will clean up the removal list of segments and the related
functions from segment.c and ioctl.c, which have hurt code
readability.

This elimination is applied by using nilfs_sufile_updatev() previously
introduced in the patch ("nilfs2: add sufile function that can modify
multiple segment usages").

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-06-10 23:41:09 +09:00
Ryusuke Konishi 4f6b828837 nilfs2: fix lock order reversal in nilfs_clean_segments ioctl
This is a companion patch to ("nilfs2: fix possible circular locking
for get information ioctls").

This corrects lock order reversal between mm->mmap_sem and
nilfs->ns_segctor_sem in nilfs_clean_segments() which was detected by
lockdep check:

 =======================================================
 [ INFO: possible circular locking dependency detected ]
 2.6.30-rc3-nilfs-00003-g360bdc1 #7
 -------------------------------------------------------
 mmap/5294 is trying to acquire lock:
  (&nilfs->ns_segctor_sem){++++.+}, at: [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c043700a>] do_page_fault+0x1d8/0x30a

 which lock already depends on the new lock.

 the existing dependency chain (in reverse order) is:

 -> #1 (&mm->mmap_sem){++++++}:
        [<c01470a5>] __lock_acquire+0x1066/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c01836bc>] might_fault+0x68/0x88
        [<c023c61d>] copy_from_user+0x2a/0x111
        [<d0d120d0>] nilfs_ioctl_prepare_clean_segments+0x1d/0xf1 [nilfs2]
        [<d0d0e2aa>] nilfs_clean_segments+0x6d/0x1b9 [nilfs2]
        [<d0d11f68>] nilfs_ioctl+0x2ad/0x318 [nilfs2]
        [<c01a3be7>] vfs_ioctl+0x22/0x69
        [<c01a408e>] do_vfs_ioctl+0x460/0x499
        [<c01a4107>] sys_ioctl+0x40/0x5a
        [<c01031a4>] sysenter_do_call+0x12/0x38
        [<ffffffff>] 0xffffffff

 -> #0 (&nilfs->ns_segctor_sem){++++.+}:
        [<c0146e0b>] __lock_acquire+0xdcc/0x13b0
        [<c01474a9>] lock_acquire+0xba/0xdd
        [<c0433f1d>] down_read+0x2a/0x3e
        [<d0d0e846>] nilfs_transaction_begin+0xb6/0x10c [nilfs2]
        [<d0cfe0e5>] nilfs_page_mkwrite+0xe7/0x154 [nilfs2]
        [<c0183b0b>] __do_fault+0x165/0x376
        [<c01855cd>] handle_mm_fault+0x287/0x5d1
        [<c043712d>] do_page_fault+0x2fb/0x30a
        [<c0435462>] error_code+0x72/0x78
        [<ffffffff>] 0xffffffff

where nilfs_clean_segments() holds:

  nilfs->ns_segctor_sem -> copy_from_user()
                             --> page fault -> mm->mmap_sem

And, page fault path may hold:

  page fault -> mm->mmap_sem
         --> nilfs_page_mkwrite() -> nilfs->ns_segctor_sem

Even though nilfs_clean_segments() does not perform write access on
given user pages, it may cause deadlock because nilfs->ns_segctor_sem
is shared per device and mm->mmap_sem can be shared with other tasks.

To avoid this problem, this patch moves all calls of copy_from_user()
outside the nilfs->ns_segctor_sem lock in the ioctl.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2009-05-11 14:54:41 +09:00
Ryusuke Konishi e339ad31f5 nilfs2: introduce secondary super block
The former versions didn't have extra super blocks.  This improves the
weak point by introducing another super block at unused region in tail of
the partition.

This doesn't break disk format compatibility; older versions just ingore
the secondary super block, and new versions just recover it if it doesn't
exist.  The partition created by an old mkfs may not have unused region,
but in that case, the secondary super block will not be added.

This doesn't make more redundant copies of the super block; it is a future
work.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi cece552074 nilfs2: simplify handling of active state of segments
will reduce some lines of segment constructor.  Previously, the state was
complexly controlled through a list of segments in order to keep
consistency in meta data of usage state of segments.  Instead, this
presents ``calculated'' active flags to userland cleaner program and stop
maintaining its real flag on disk.

Only by this fake flag, the cleaner cannot exactly know if each segment is
reclaimable or not.  However, the recent extension of nilfs_sustat ioctl
struct (nilfs2-extend-nilfs_sustat-ioctl-struct.patch) can prevent the
cleaner from reclaiming in-use segment wrongly.

So, now I can apply this for simplification.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:20 -07:00
Ryusuke Konishi c96fa464a5 nilfs2: mark minor flag for checkpoint created by internal operation
Nilfs creates checkpoints even for garbage collection or metadata updates
such as checkpoint mode change.  So, user often sees checkpoints created
only by such internal operations.

This is inconvenient in some situations.  For example, application that
monitors checkpoints and changes them to snapshots, will fall into an
infinite loop because it cannot distinguish internally created
checkpoints.

This patch solves this sort of problem by adding a flag to checkpoint for
identification.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi 458c5b0822 nilfs2: clean up sketch file
The sketch file is a file to mark checkpoints with user data.  It was
experimentally introduced in the original implementation, and now
obsolete.  The file was handled differently with regular files; the file
size got truncated when a checkpoint was created.

This stops the special treatment and will treat it as a regular file.
Most users are not affected because mkfs.nilfs2 no longer makes this file.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:19 -07:00
Ryusuke Konishi f30bf3e40f nilfs2: fix missed-sync issue for do_sync_mapping_range()
Chris Mason pointed out that there is a missed sync issue in
nilfs_writepages():

On Wed, 17 Dec 2008 21:52:55 -0500, Chris Mason wrote:
> It looks like nilfs_writepage ignores WB_SYNC_NONE, which is used by
> do_sync_mapping_range().

where WB_SYNC_NONE in do_sync_mapping_range() was replaced with
WB_SYNC_ALL by Nick's patch (commit:
ee53a891f4).

This fixes the problem by letting nilfs_writepages() write out the log of
file data within the range if sync_mode is WB_SYNC_ALL.

This involves removal of nilfs_file_aio_write() which was previously
needed to ensure O_SYNC sync writes.

Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:15 -07:00
Ryusuke Konishi 9ff05123e3 nilfs2: segment constructor
This adds the segment constructor (also called log writer).

The segment constructor collects dirty buffers for every dirty inode,
makes summaries of the buffers, assigns disk block addresses to the
buffers, and then submits BIOs for the buffers.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:15 -07:00