Before we are able to define all subsystem ids at compile time we need
a more fine grained control what gets defined when we include
cgroup_subsys.h. For example we define the enums for the subsystems or
to declare for struct cgroup_subsys (builtin subsystem) by including
cgroup_subsys.h and defining SUBSYS accordingly.
Currently, the decision if a subsys is used is defined inside the
header by testing if CONFIG_*=y is true. By moving this test outside
of cgroup_subsys.h we are able to control it on the include level.
This is done by introducing IS_SUBSYS_ENABLED which then is defined
according the task, e.g. is CONFIG_*=y or CONFIG_*=m.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
CGROUP_BUILTIN_SUBSYS_COUNT is used as start index or stop index when
looping over the subsys array looking either at the builtin or the
module subsystems. Since all the builtin subsystems have an id which
is lower then CGROUP_BUILTIN_SUBSYS_COUNT we know that any module will
have an id larger than CGROUP_BUILTIN_SUBSYS_COUNT. In short the ids
are sorted.
We are about to change id assignment to happen only at compile time
later in this series. That means we can't rely on the above trick
since all ids will always be defined at compile time. Furthermore,
ordering the builtin subsystems and the module subsystems is not
really necessary.
So we need a different way to know which subsystem is a builtin or a
module one. We can use the subsys[]->module pointer for this. Any
place where we need to know if a subsys is module we just check for
the pointer. If it is NULL then the subsystem is a builtin one.
With this we are able to drop the CGROUP_BUILTIN_SUBSYS_COUNT
enum. Though we need to introduce a temporary placeholder so that we
don't get a compilation error when only CONFIG_CGROUP is selected and
no single controller. An empty enum definition is not valid. Later in
this series we are able to remove the placeholder again.
And with this change we get a fix for this:
kernel/cgroup.c: In function ‘cgroup_load_subsys’:
kernel/cgroup.c:4326:38: warning: array subscript is below array bounds [-Warray-bounds]
when CONFIG_CGROUP=y and no built in controller was enabled.
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Gao feng <gaofeng@cn.fujitsu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.r.fastabend@intel.com>
Cc: netdev@vger.kernel.org
Cc: cgroups@vger.kernel.org
This is one of the items in the plumber's wish list.
For use cases:
>> What would the use case be for this?
>
> Attaching meta information to services, in an easily discoverable
> way. For example, in systemd we create one cgroup for each service, and
> could then store data like the main pid of the specific service as an
> xattr on the cgroup itself. That way we'd have almost all service state
> in the cgroupfs, which would make it possible to terminate systemd and
> later restart it without losing any state information. But there's more:
> for example, some very peculiar services cannot be terminated on
> shutdown (i.e. fakeraid DM stuff) and it would be really nice if the
> services in question could just mark that on their cgroup, by setting an
> xattr. On the more desktopy side of things there are other
> possibilities: for example there are plans defining what an application
> is along the lines of a cgroup (i.e. an app being a collection of
> processes). With xattrs one could then attach an icon or human readable
> program name on the cgroup.
>
> The key idea is that this would allow attaching runtime meta information
> to cgroups and everything they model (services, apps, vms), that doesn't
> need any complex userspace infrastructure, has good access control
> (i.e. because the file system enforces that anyway, and there's the
> "trusted." xattr namespace), notifications (inotify), and can easily be
> shared among applications.
>
> Lennart
v7:
- no changes
v6:
- remove user xattr namespace, only allow trusted and security
v5:
- check for capabilities before setting/removing xattrs
v4:
- no changes
v3:
- instead of config option, use mount option to enable xattr support
Original-patch-by: Li Zefan <lizefan@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lennart Poettering <lpoetter@redhat.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When remounting cgroupfs with some subsystems added to it and some
removed, cgroup will remove all the files in root directory and then
re-popluate it.
What I'm doing here is, only remove files which belong to subsystems that
are to be unbinded, and only create files for newly-added subsystems.
The purpose is to have all other files untouched.
This is a preparation for cgroup xattr support.
v7:
- checkpatch warnings fixed
v6:
- no changes
v5:
- no changes
v4:
- refactored cgroup_clear_directory() to not use cgroup_rm_file()
- instead of going thru the list of files, get the file list using the
subsystems
- use 'subsys_mask' instead of {added,removed}_bits and made
cgroup_populate_dir() to match the parameters with cgroup_clear_directory()
v3:
- refresh patches after recent refactoring
Original-patch-by: Li Zefan <lizefan@huawei.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Lennart Poettering <lpoetter@redhat.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup changes from Tejun Heo:
"Nothing too interesting. A minor bug fix and some cleanups."
* 'for-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Update remount documentation
cgroup: cgroup_rm_files() was calling simple_unlink() with the wrong inode
cgroup: Remove populate() documentation
cgroup: remove hierarchy_mutex
Pass mount flags to sget() so that it can use them in initialising a new
superblock before the set function is called. They could also be passed to the
compare function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Just the flags; only NFS cares even about that, but there are
legitimate uses for such argument. And getting rid of that
completely would require splitting ->lookup() into a couple
of methods (at least), so let's leave that alone for now...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
While refactoring cgroup file removal path, 05ef1d7c4a "cgroup:
introduce struct cfent" incorrectly changed the @dir argument of
simple_unlink() to the inode of the file being deleted instead of that
of the containing directory.
The effect of this bug is minor - ctime and mtime of the parent
weren't properly updated on file deletion.
Fix it by using @cgrp->dentry->d_inode instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: stable@vger.kernel.org
48ddbe1946 "cgroup: make css->refcnt clearing on cgroup removal
optional" allowed a css to linger after the associated cgroup is
removed. As a css holds a reference on the cgroup's dentry, it means
that cgroup dentries may linger for a while.
Destroying a superblock which has dentries with positive refcnts is a
critical bug and triggers BUG() in vfs code. As each cgroup dentry
holds an s_active reference, any lingering cgroup has both its dentry
and the superblock pinned and thus preventing premature release of
superblock.
Unfortunately, after 48ddbe1946, there's a small window while
releasing a cgroup which is directly under the root of the hierarchy.
When a cgroup directory is released, vfs layer first deletes the
corresponding dentry and then invokes dput() on the parent, which may
recurse further, so when a cgroup directly below root cgroup is
released, the cgroup is first destroyed - which releases the s_active
it was holding - and then the dentry for the root cgroup is dput().
This creates a window where the root dentry's refcnt isn't zero but
superblock's s_active is. If umount happens before or during this
window, vfs will see the root dentry with non-zero refcnt and trigger
BUG().
Before 48ddbe1946, this problem didn't exist because the last dentry
reference was guaranteed to be put synchronously from rmdir(2)
invocation which holds s_active around the whole process.
Fix it by holding an extra superblock->s_active reference across
dput() from css release, which is the dput() path added by 48ddbe1946
and the only one which doesn't hold an extra s_active ref across the
final cgroup dput().
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Tested-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
This reverts commit fa980ca87d. The
commit was an attempt to fix a race condition where a cgroup hierarchy
may be unmounted with positive dentry reference on root cgroup. While
the commit made the race condition slightly more difficult to trigger,
the race was still there and could be reliably triggered using a
different test case.
Revert the incorrect fix. The next commit will describe the race and
fix it correctly.
Signed-off-by: Tejun Heo <tj@kernel.org>
LKML-Reference: <4FEEA5CB.8070809@huawei.com>
Reported-by: shyju pv <shyju.pv@huawei.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
When we fixed the race between atomic_dec and css_refcnt, we missed
the fact that css_refcnt internally subtracts CSS_DEACT_BIAS to get
the actual reference count. This can potentially cause a refcount leak
if __css_put races with cgroup_clear_css_refs.
Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
It was introduced for memcg to iterate cgroup hierarchy without
holding cgroup_mutex, but soon after that it was replaced with
a lockless way in memcg.
No one used hierarchy_mutex since that, so remove it.
Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
__css_put is using atomic_dec on the ref count, and then
looking at the ref count to make decisions. This is prone
to races, as someone else may decrement ref count between
our decrement and our decision. Instead, we should base our
decisions on the value that we decremented the ref count to.
(This results in an actual race on Google's kernel which I
haven't been able to reproduce on the upstream kernel. Having
said that, it's still incorrect by inspection).
Signed-off-by: Salman Qazi <sqazi@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Pull cgroup fix from Tejun Heo:
"This fixes the possible premature superblock release on umount bug
mentioned during v3.5-rc1 pull request.
Originally, cgroup dentry destruction path assumed that cgroup dentry
didn't have any reference left after cgroup removal thus put super
during dentry removal. Now that there can be lingering dentry
references, this led to super being put with live dentries. This
patch fixes the problem by putting super ref on dentry release instead
of removal."
* 'for-3.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: superblock can't be released with active dentries
Library functions should not grab locks when the callsites can do it,
even if the lock nests like the rcu read-side lock does.
Push the rcu_read_lock() from css_is_ancestor() to its single user,
mem_cgroup_same_or_subtree() in preparation for another user that may
already hold the rcu read-side lock.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
48ddbe1946 "cgroup: make css->refcnt clearing on cgroup removal
optional" allowed a css to linger after the associated cgroup is
removed. As a css holds a reference on the cgroup's dentry, it means
that cgroup dentries may linger for a while.
cgroup_create() does grab an active reference on the superblock to
prevent it from going away while there are !root cgroups; however, the
reference is put from cgroup_diput() which is invoked on cgroup
removal, so cgroup dentries which are removed but persisting due to
lingering csses already have released their superblock active refs
allowing superblock to be killed while those dentries are around.
Given the right condition, this makes cgroup_kill_sb() call
kill_litter_super() with dentries with non-zero d_count leading to
BUG() in shrink_dcache_for_umount_subtree().
Fix it by adding cgroup_dops->d_release() operation and moving
deactivate_super() to it. cgroup_diput() now marks dentry->d_fsdata
with itself if superblock should be deactivated and cgroup_d_release()
deactivates the superblock on dentry release.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <CA+1xoqe5hMuxzCRhMy7J0XchDk2ZnuxOHJKikROk1-ReAzcT6g@mail.gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
Pull user namespace enhancements from Eric Biederman:
"This is a course correction for the user namespace, so that we can
reach an inexpensive, maintainable, and reasonably complete
implementation.
Highlights:
- Config guards make it impossible to enable the user namespace and
code that has not been converted to be user namespace safe.
- Use of the new kuid_t type ensures the if you somehow get past the
config guards the kernel will encounter type errors if you enable
user namespaces and attempt to compile in code whose permission
checks have not been updated to be user namespace safe.
- All uids from child user namespaces are mapped into the initial
user namespace before they are processed. Removing the need to add
an additional check to see if the user namespace of the compared
uids remains the same.
- With the user namespaces compiled out the performance is as good or
better than it is today.
- For most operations absolutely nothing changes performance or
operationally with the user namespace enabled.
- The worst case performance I could come up with was timing 1
billion cache cold stat operations with the user namespace code
enabled. This went from 156s to 164s on my laptop (or 156ns to
164ns per stat operation).
- (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
Most uid/gid setting system calls treat these value specially
anyway so attempting to use -1 as a uid would likely cause
entertaining failures in userspace.
- If setuid is called with a uid that can not be mapped setuid fails.
I have looked at sendmail, login, ssh and every other program I
could think of that would call setuid and they all check for and
handle the case where setuid fails.
- If stat or a similar system call is called from a context in which
we can not map a uid we lie and return overflowuid. The LFS
experience suggests not lying and returning an error code might be
better, but the historical precedent with uids is different and I
can not think of anything that would break by lying about a uid we
can't map.
- Capabilities are localized to the current user namespace making it
safe to give the initial user in a user namespace all capabilities.
My git tree covers all of the modifications needed to convert the core
kernel and enough changes to make a system bootable to runlevel 1."
Fix up trivial conflicts due to nearby independent changes in fs/stat.c
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
userns: Silence silly gcc warning.
cred: use correct cred accessor with regards to rcu read lock
userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
userns: Convert cgroup permission checks to use uid_eq
userns: Convert tmpfs to use kuid and kgid where appropriate
userns: Convert sysfs to use kgid/kuid where appropriate
userns: Convert sysctl permission checks to use kuid and kgids.
userns: Convert proc to use kuid/kgid where appropriate
userns: Convert ext4 to user kuid/kgid where appropriate
userns: Convert ext3 to use kuid/kgid where appropriate
userns: Convert ext2 to use kuid/kgid where appropriate.
userns: Convert devpts to use kuid/kgid where appropriate
userns: Convert binary formats to use kuid/kgid where appropriate
userns: Add negative depends on entries to avoid building code that is userns unsafe
userns: signal remove unnecessary map_cred_ns
userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
userns: Convert stat to return values mapped from kuids and kgids
userns: Convert user specfied uids and gids in chown into kuids and kgid
userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
...
Allowing kthreadd to be moved to a non-root group makes no sense, it being
a global resource, and needlessly leads unsuspecting users toward trouble.
1. An RT workqueue worker thread spawned in a task group with no rt_runtime
allocated is not schedulable. Simple user error, but harmful to the box.
2. A worker thread which acquires PF_THREAD_BOUND can never leave a cpuset,
rendering the cpuset immortal.
Save the user some unexpected trouble, just say no.
Signed-off-by: Mike Galbraith <mgalbraith@suse.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With memcg converted, cgroup_subsys->populate() doesn't have any user
left. Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Currently, cgroup removal tries to drain all css references. If there
are active css references, the removal logic waits and retries
->pre_detroy() until either all refs drop to zero or removal is
cancelled.
This semantics is unusual and adds non-trivial complexity to cgroup
core and IMHO is fundamentally misguided in that it couples internal
implementation details (references to internal data structure) with
externally visible operation (rmdir). To userland, this is a behavior
peculiarity which is unnecessary and difficult to expect (css refs is
otherwise invisible from userland), and, to policy implementations,
this is an unnecessary restriction (e.g. blkcg wants to hold css refs
for caching purposes but can't as that becomes visible as rmdir hang).
Unfortunately, memcg currently depends on ->pre_destroy() retrials and
cgroup removal vetoing and can't be immmediately switched to the new
behavior. This patch introduces the new behavior of not waiting for
css refs to drain and maintains the old behavior for subsystems which
have __DEPRECATED_clear_css_refs set.
Once, memcg is updated, we can drop the code paths for the old
behavior as proposed in the following patch. Note that the following
patch is incorrect in that dput work item is in cgroup and may lose
some of dputs when multiples css's are released back-to-back, and
__css_put() triggers check_for_release() when refcnt reaches 0 instead
of 1; however, it shows what part can be removed.
http://thread.gmane.org/gmane.linux.kernel.containers/22559/focus=75251
Note that, in not-too-distant future, cgroup core will start emitting
warning messages for subsys which require the old behavior, so please
get moving.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
When a cgroup is about to be removed, cgroup_clear_css_refs() is
called to check and ensure that there are no active css references.
This is currently achieved by dropping the refcnt to zero iff it has
only the base ref. If all css refs could be dropped to zero, ref
clearing is successful and CSS_REMOVED is set on all css. If not, the
base ref is restored. While css ref is zero w/o CSS_REMOVED set, any
css_tryget() attempt on it busy loops so that they are atomic
w.r.t. the whole css ref clearing.
This does work but dropping and re-instating the base ref is somewhat
hairy and makes it difficult to add more logic to the put path as
there are two of them - the regular css_put() and the reversible base
ref clearing.
This patch updates css ref clearing such that blocking new
css_tryget() and putting the base ref are separate operations.
CSS_DEACT_BIAS, defined as INT_MIN, is added to css->refcnt and
css_tryget() busy loops while refcnt is negative. After all css refs
are deactivated, if they were all one, ref clearing succeeded and
CSS_REMOVED is set and the base ref is put using the regular
css_put(); otherwise, CSS_DEACT_BIAS is subtracted from the refcnts
and the original postive values are restored.
css_refcnt() accessor which always returns the unbiased positive
reference counts is added and used to simplify refcnt usages. While
at it, relocate and reformat comments in cgroup_has_css_refs().
This separates css->refcnt deactivation and putting the base ref,
which enables the next patch to make ref clearing optional.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Implement cgroup_rm_cftypes() which removes an array of cftypes from a
subsystem. It can be called whether the target subsys is attached or
not. cgroup core will remove the specified file from all existing
cgroups.
This will be used to improve sub-subsys modularity and will be helpful
for unified hierarchy.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
This patch adds cfent (cgroup file entry) which is the association
between a cgroup and a file. This is in-cgroup representation of
files under a cgroup directory. This simplifies walking walking
cgroup files and thus cgroup_clear_directory(), which is now
implemented in two parts - cgroup_rm_file() and a loop around it.
cgroup_rm_file() will be used to implement cftype removal and cfent is
scheduled to serve cgroup specific per-file data (e.g. for sysfs-like
"sever" semantics).
v2: - cfe was freed from cgroup_rm_file() which led to use-after-free
if the file had openers at the time of removal. Moved to
cgroup_diput().
- cgroup_clear_directory() triggered WARN_ON_ONCE() if d_subdirs
wasn't empty after removing all files. This triggered
spuriously if some files were open during directory clearing.
Removed.
v3: - In cgroup_diput(), WARN_ONCE(!list_empty(&cfe->node)) could be
spuriously triggered for root cgroups because they don't go
through cgroup_clear_directory() on unmount. Don't trigger WARN
for root cgroups.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Glauber Costa <glommer@parallels.com>
No controller is using cgroup_add_files[s](). Unexport them, and
convert cgroup_add_files() to handle NULL entry terminated array
instead of taking count explicitly and continue creation on failure
for internal use.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Convert debug, freezer, cpuset, cpu_cgroup, cpuacct, net_prio, blkio,
net_cls and device controllers to use the new cftype based interface.
Termination entry is added to cftype arrays and populate callbacks are
replaced with cgroup_subsys->base_cftypes initializations.
This is functionally identical transformation. There shouldn't be any
visible behavior change.
memcg is rather special and will be converted separately.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Vivek Goyal <vgoyal@redhat.com>
Now that cftype can express whether a file should only be on root,
cft_release_agent can be merged into the base files cftypes array.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Currently, cgroup directories are populated by subsys->populate()
callback explicitly creating files on each cgroup creation. This
level of flexibility isn't needed or desirable. It provides largely
unused flexibility which call for abuses while severely limiting what
the core layer can do through the lack of structure and conventions.
Per each cgroup file type, the only distinction that cgroup users is
making is whether a cgroup is root or not, which can easily be
expressed with flags.
This patch introduces cgroup_add_cftypes(). These deal with cftypes
instead of individual files - controllers indicate that certain types
of files exist for certain subsystem. Newly added CFTYPE_*_ON_ROOT
flags indicate whether a cftype should be excluded or created only on
the root cgroup.
cgroup_add_cftypes() can be called any time whether the target
subsystem is currently attached or not. cgroup core will create files
on the existing cgroups as necessary.
Also, cgroup_subsys->base_cftypes is added to ease registration of the
base files for the subsystem. If non-NULL on subsys init, the cftypes
pointed to by ->base_cftypes are automatically registered on subsys
init / load.
Further patches will convert the existing users and remove the file
based interface. Note that this interface allows dynamic addition of
files to an active controller. This will be used for sub-controller
modularity and unified hierarchy in the longer term.
This patch implements the new mechanism but doesn't apply it to any
user.
v2: replaced DECLARE_CGROUP_CFTYPES[_COND]() with
cgroup_subsys->base_cftypes, which works better for cgroup_subsys
which is loaded as module.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Build a list of all cgroups anchored at cgroupfs_root->allcg_list and
going through cgroup->allcg_node. The list is protected by
cgroup_mutex and will be used to improve cgroup file handling.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
cgroup_populate_dir() currently clears all files and then repopulate
the directory; however, the clearing part is only useful when it's
called from cgroup_remount(). Relocate the invocation to
cgroup_remount().
This is to prepare for further cgroup file handling updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
This patch marks the following features for deprecation.
* Rebinding subsys by remount: Never reached useful state - only works
on empty hierarchies.
* release_agent update by remount: release_agent itself will be
replaced with conventional fsnotify notification.
v2: Lennart pointed out that "name=" is necessary for mounts w/o any
controller attached. Drop "name=" deprecation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Lennart Poettering <mzxreary@0pointer.de>
61d1d219c4 "cgroup: remove extra calls to find_existing_css_set" made
cgroup_task_migrate() return void. An unfortunate side effect was
that cgroup_attach_task() was depending on that function's return
value to clear its @retval on the success path. On cgroup mounts
without any subsystem with ->can_attach() callback,
cgroup_attach_task() ended up returning @retval without initializing
it on success.
For some reason, gcc failed to warn about it and it didn't cause
cgroup_attach_task() to return non-zero value in many cases, probably
due to difference in register allocation. When the problem
materializes, systemd fails to populate /systemd cgroup mount and
fails to boot.
Fix it by initializing @retval to zero on declaration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <alpine.LNX.2.00.1203282354440.25526@pobox.suse.cz>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Merge first batch of patches from Andrew Morton:
"A few misc things and all the MM queue"
* emailed from Andrew Morton <akpm@linux-foundation.org>: (92 commits)
memcg: avoid THP split in task migration
thp: add HPAGE_PMD_* definitions for !CONFIG_TRANSPARENT_HUGEPAGE
memcg: clean up existing move charge code
mm/memcontrol.c: remove unnecessary 'break' in mem_cgroup_read()
mm/memcontrol.c: remove redundant BUG_ON() in mem_cgroup_usage_unregister_event()
mm/memcontrol.c: s/stealed/stolen/
memcg: fix performance of mem_cgroup_begin_update_page_stat()
memcg: remove PCG_FILE_MAPPED
memcg: use new logic for page stat accounting
memcg: remove PCG_MOVE_LOCK flag from page_cgroup
memcg: simplify move_account() check
memcg: remove EXPORT_SYMBOL(mem_cgroup_update_page_stat)
memcg: kill dead prev_priority stubs
memcg: remove PCG_CACHE page_cgroup flag
memcg: let css_get_next() rely upon rcu_read_lock()
cgroup: revert ss_id_lock to spinlock
idr: make idr_get_next() good for rcu_read_lock()
memcg: remove unnecessary thp check in page stat accounting
memcg: remove redundant returns
memcg: enum lru_list lru
...
Remove lock and unlock around css_get_next()'s call to idr_get_next().
memcg iterators (only users of css_get_next) already did rcu_read_lock(),
and its comment demands that; but add a WARN_ON_ONCE to make sure of it.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c1e2ee2dc4 ("memcg: replace ss->id_lock with a rwlock") has now
been seen to cause the unfair behavior we should have expected from
converting a spinlock to an rwlock: softlockup in cgroup_mkdir(), whose
get_new_cssid() is waiting for the wlock, while there are 19 tasks using
the rlock in css_get_next() to get on with their memcg workload (in an
artificial test, admittedly). Yet lib/idr.c was made suitable for RCU
way back: revert that commit, restoring ss->id_lock to a spinlock.
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull vfs pile 1 from Al Viro:
"This is _not_ all; in particular, Miklos' and Jan's stuff is not there
yet."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (64 commits)
ext4: initialization of ext4_li_mtx needs to be done earlier
debugfs-related mode_t whack-a-mole
hfsplus: add an ioctl to bless files
hfsplus: change finder_info to u32
hfsplus: initialise userflags
qnx4: new helper - try_extent()
qnx4: get rid of qnx4_bread/qnx4_getblk
take removal of PF_FORKNOEXEC to flush_old_exec()
trim includes in inode.c
um: uml_dup_mmap() relies on ->mmap_sem being held, but activate_mm() doesn't hold it
um: embed ->stub_pages[] into mmu_context
gadgetfs: list_for_each_safe() misuse
ocfs2: fix leaks on failure exits in module_init
ecryptfs: make register_filesystem() the last potential failure exit
ntfs: forgets to unregister sysctls on register_filesystem() failure
logfs: missing cleanup on register_filesystem() failure
jfs: mising cleanup on register_filesystem() failure
make configfs_pin_fs() return root dentry on success
configfs: configfs_create_dir() has parent dentry in dentry->d_parent
configfs: sanitize configfs_create()
...
Walking through the tasklist in cgroup_enable_task_cg_list() inside
an RCU read side critical section is not enough because:
- RCU is not (yet) safe against while_each_thread()
- If we use only RCU, a forking task that has passed cgroup_post_fork()
without seeing use_task_css_set_links == 1 is not guaranteed to have
its child immediately visible in the tasklist if we walk through it
remotely with RCU. In this case it will be missing in its css_set's
task list.
Thus we need to traverse the list (unfortunately) under the
tasklist_lock. It makes us safe against while_each_thread() and also
make sure we see all forked task that have been added to the tasklist.
As a secondary effect, reading and writing use_task_css_set_links are
now well ordered against tasklist traversing and modification. The new
layout is:
CPU 0 CPU 1
use_task_css_set_links = 1 write_lock(tasklist_lock)
read_lock(tasklist_lock) add task to tasklist
do_each_thread() { write_unlock(tasklist_lock)
add thread to css set links if (use_task_css_set_links)
} while_each_thread() add thread to css set links
read_unlock(tasklist_lock)
If CPU 0 traverse the list after the task has been added to the tasklist
then it is correctly added to the css set links. OTOH if CPU 0 traverse
the tasklist before the new task had the opportunity to be added to the
tasklist because it was too early in the fork process, then CPU 1
catches up and add the task to the css set links after it added the task
to the tasklist. The right value of use_task_css_set_links is guaranteed
to be visible from CPU 1 due to the LOCK/UNLOCK implicit barrier properties:
the read_unlock on CPU 0 makes the write on use_task_css_set_links happening
and the write_lock on CPU 1 make the read of use_task_css_set_links that comes
afterward to return the correct value.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Remove the stale comment about RCU protection. Many callers
(all of them?) of cgroup_enable_task_cg_list() don't seem
to be in an RCU read side critical section. Besides, RCU is
not helpful to protect against while_each_thread().
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Mandeep Singh Baines <msb@chromium.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The argument is not used at all, and it's not necessary, because
a specific callback handler of course knows which subsys it
belongs to.
Now only ->pupulate() takes this argument, because the handlers of
this callback always call cgroup_add_file()/cgroup_add_files().
So we reduce a few lines of code, though the shrinking of object size
is minimal.
16 files changed, 113 insertions(+), 162 deletions(-)
text data bss dec hex filename
5486240 656987 7039960 13183187 c928d3 vmlinux.o.orig
5486170 656987 7039960 13183117 c9288d vmlinux.o
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
In cgroup_attach_proc, we indirectly call find_existing_css_set 3
times. It is an expensive call so we want to call it a minimum
of times. This patch only calls it once and stores the result so
that it can be used later on when we call cgroup_task_migrate.
This required modifying cgroup_task_migrate to take the new css_set
(which we obtained from find_css_set) as a parameter. The nice side
effect of this is that cgroup_task_migrate is now identical for
cgroup_attach_task and cgroup_attach_proc. It also now returns a
void since it can never fail.
Changes in V5:
* https://lkml.org/lkml/2012/1/20/344 (Tejun Heo)
* Remove css_set_refs
Changes in V4:
* https://lkml.org/lkml/2011/12/22/421 (Li Zefan)
* Avoid GFP_KERNEL (sleep) in rcu_read_lock by getting css_set in
a separate loop not under an rcu_read_lock
Changes in V3:
* https://lkml.org/lkml/2011/12/22/13 (Li Zefan)
* Fixed earlier bug by creating a seperate patch to remove tasklist_lock
Changes in V2:
* https://lkml.org/lkml/2011/12/20/372 (Tejun Heo)
* Move find_css_set call into loop which creates the flex array
* Author
* Kill css_set_refs and use group_size instead
* Fix an off-by-one error in counting css_set refs
* Add a retval check in out_list_teardown
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
We can replace the tasklist_lock in cgroup_attach_proc with an
rcu_read_lock().
Changes in V4:
* https://lkml.org/lkml/2011/12/23/284 (Frederic Weisbecker)
* Minimize size of rcu_read_lock critical section
* Add comment
* https://lkml.org/lkml/2011/12/26/136 (Li Zefan)
* Split into two patches
Changes in V3:
* https://lkml.org/lkml/2011/12/22/419 (Frederic Weisbecker)
* Add an rcu_read_lock to protect against exit
Changes in V2:
* https://lkml.org/lkml/2011/12/22/86 (Tejun Heo)
* Use a goto instead of returning -EAGAIN
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
To keep the complexity of the double-check locking in one place, move
the thread_group_leader check up into attach_task_by_pid(). This
allows us to use a goto instead of returning -EAGAIN.
While at it, convert a couple of returns to gotos and use rcu for the
!pid case also in order to simplify the logic.
Changes in V2:
* https://lkml.org/lkml/2011/12/22/86 (Tejun Heo)
* Use a goto instead of returning -EAGAIN
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: containers@lists.linux-foundation.org
Cc: cgroups@vger.kernel.org
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Menage <paul@paulmenage.org>
* 'for-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cgroup: fix to allow mounting a hierarchy by name
cgroup: move assignement out of condition in cgroup_attach_proc()
cgroup: Remove task_lock() from cgroup_post_fork()
cgroup: add sparse annotation to cgroup_iter_start() and cgroup_iter_end()
cgroup: mark cgroup_rmdir_waitq and cgroup_attach_proc() as static
cgroup: only need to check oldcgrp==newgrp once
cgroup: remove redundant get/put of task struct
cgroup: remove redundant get/put of old css_set from migrate
cgroup: Remove unnecessary task_lock before fetching css_set on migration
cgroup: Drop task_lock(parent) on cgroup_fork()
cgroups: remove redundant get/put of css_set from css_set_check_fetched()
resource cgroups: remove bogus cast
cgroup: kill subsys->can_attach_task(), pre_attach() and attach_task()
cgroup, cpuset: don't use ss->pre_attach()
cgroup: don't use subsys->can_attach_task() or ->attach_task()
cgroup: introduce cgroup_taskset and use it in subsys->can_attach(), cancel_attach() and attach()
cgroup: improve old cgroup handling in cgroup_attach_proc()
cgroup: always lock threadgroup during migration
threadgroup: extend threadgroup_lock() to cover exit and exec
threadgroup: rename signal->threadgroup_fork_lock to ->group_rwsem
...
Fix up conflict in kernel/cgroup.c due to commit e0197aae59e5: "cgroups:
fix a css_set not found bug in cgroup_attach_proc" that already
mentioned that the bug is fixed (differently) in Tejun's cgroup
patchset. This one, in other words.
If we mount a hierarchy with a specified name, the name is unique,
and we can use it to mount the hierarchy without specifying its
set of subsystem names. This feature is documented is
Documentation/cgroups/cgroups.txt section 2.3
Here's an example:
# mount -t cgroup -o cpuset,name=myhier xxx /cgroup1
# mount -t cgroup -o name=myhier xxx /cgroup2
But it was broken by commit 32a8cf235e
(cgroup: make the mount options parsing more accurate)
This fixes the regression.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
Gcc complains about this: "kernel/cgroup.c:2179:4: warning: suggest
parentheses around assignment used as truth value [-Wparentheses]"
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Daniel Wagner