When you turn off ARP on a netdevice then the first packet always goes
out with a dstMAC of all zeroes. This is because the first packet is
used to resolve ARP entries. Even though the ARP entry may be resolved
(I tried by setting a static ARP entry for a host i was pinging from),
it gets overwritten by virtue of having the netdevice disabling ARP.
Subsequent packets go out fine with correct dstMAC address (which may
be why people have ignored reporting this issue).
To cut the story short:
the culprit code is in net/ethernet/eth.c::eth_header()
----
/*
* Anyway, the loopback-device should never use this
function...
*/
if (dev->flags & (IFF_LOOPBACK|IFF_NOARP))
{
memset(eth->h_dest, 0, dev->addr_len);
return ETH_HLEN;
}
if(daddr)
{
memcpy(eth->h_dest,daddr,dev->addr_len);
return ETH_HLEN;
}
----
Note how the h_dest is being reset when device has IFF_NOARP.
As a note:
All devices including loopback pass a daddr. loopback in fact passes
a 0 all the time ;->
This means i can delete the check totaly or i can remove the IFF_NOARP
Alexey says:
--------------------
I think, it was me who did this crap. It was so long ago I do not remember
why it was made.
I remember some troubles with dummy device. It tried to resolve
addresses, apparently, without success and generated errors instead of
blackholing. I think the problem was eventually solved at neighbour
level.
After some thinking I suspect the deletion of this chunk could change
behaviour of some parts which do not use neighbour cache f.e. packet
socket.
I think safer approach would be to move this chunk after if (daddr).
And the possibility to remove this completely could be analyzed later.
--------------------
Patch updated with Alexey's safer suggestions.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
We often just do an atomic_dec(&x->refcnt) on an xfrm_state object
because we know there is more than 1 reference remaining and thus
we can elide the heavier xfrm_state_put() call.
Do this behind an inline function called __xfrm_state_put() so that is
more obvious and also to allow us to more cleanly add refcount
debugging later.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
When garbage collecting route cache entries of multipath routes
in rt_garbage_collect(), entries were deleted from the hash bucket
'i' while holding a spin lock on bucket 'k' resulting in a system
hang. Delete entries, if any, from bucket 'k' instead.
Signed-off-by: Suresh Bhogavilli <sbhogavilli@verisign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The bridge-netfilter code attaches a fake dst_entry with dst->ops == NULL
to purely bridged packets. When these packets are SNATed and a policy
lookup is done, xfrm_lookup crashes because it tries to dereference
dst->ops.
Change xfrm_lookup not to dereference dst->ops before checking for the
DST_NOXFRM flag and set this flag in the fake dst_entry.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some of netfilter-related members are initalized / copied twice in
skb_clone(). Remove one.
Pointed out by Olivier MATZ <olivier.matz@6wind.com>.
And this patch also fixes order of copying / clearing members.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When redirecting an outgoing packet to loopback, it keeps the original
conntrack reference and information from the outgoing path, which
falsely triggers the check for DNAT on input and the dst_entry is
released to trigger rerouting. ip_route_input refuses to route the
packet because it has a local source address and it is dropped.
Look at the packet itself to dermine if it was NATed. Also fix a
missing inversion that causes unneccesary xfrm lookups.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICMP errors are only SNATed when their source matches the source of the
connection they are related to, otherwise the source address is not
changed. This creates problems with ICMP frag. required messages
originating from a router behind the NAT, if private IPs are used the
packet has a good change of getting dropped on the path to its destination.
Always NAT ICMP errors similar to the original connection.
Based on report by Al Viro.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If skb->ip_summed is CHECKSUM_HW here, skb->csum includes checksum
of actual IPv6 header and extension headers. Then such excess
checksum must be subtruct when nf_conntrack calculates TCP/UDP checksum
with pseudo IPv6 header. Spotted by Ben Skeggs.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Locally generated ICMPv6 errors should be associated with the conntrack
of the original packet. Since the conntrack entry may not be in the hash
tables (for the first packet), it must be manually attached.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP RSTs generated by the REJECT target should be associated with the
conntrack of the original TCP packet. Since the conntrack entry is
usually not is the hash tables, it must be manually attached.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move registration of __nf_ct_attach to nf_conntrack_core to make it usable
for IPv6 connection tracking as well.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
NF_CONNTRACK_MARK is bool and depends on NF_CONNTRACK which is
tristate. If a variable depends on NF_CONNTRACK_MARK and doesn't take
care about NF_CONNTRACK, it can be y even if NF_CONNTRACK isn't y.
NF_CT_ACCT have same issue, too.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a packet matching an IPsec policy is SNATed so it doesn't match any
policy anymore it looses its xfrm bundle, which makes xfrm4_output_finish
crash because of a NULL pointer dereference.
This patch directs these packets to the original output path instead. Since
the packets have already passed the POST_ROUTING hook, but need to start at
the beginning of the original output path which includes another
POST_ROUTING invocation, a flag is added to the IPCB to indicate that the
packet was rerouted and doesn't need to pass the POST_ROUTING hook again.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like somebody forgot to use the _bh spin_lock variant. We ran into a
deadlock where br->hello_timer expired while br_stp_disable_br() walked
br->port_list.
Signed-off-by: Adrian Drzewiecki <z@drze.net>
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To find out if a packet needs to be handled by IPsec after SNAT, packets
are currently rerouted in POST_ROUTING and a new xfrm lookup is done. This
breaks SNAT of non-unicast packets to non-local addresses because the
packet is routed as incoming packet and no neighbour entry is bound to the
dst_entry. In general, it seems to be a bad idea to replace the dst_entry
after the packet was already sent to the output routine because its state
might not match what's expected.
This patch changes the xfrm lookup in POST_ROUTING to re-use the original
dst_entry without routing the packet again. This means no policy routing
can be used for transport mode transforms (which keep the original route)
when packets are SNATed to match the policy, but it looks like the best
we can do for now.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert the following changeset:
bc8dfcb939
Recursive SKB frag lists are really possible and disallowing
them breaks things.
Noticed by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Problem discovered and initial patch by Olaf Kirch:
there's a problem with IPsec that has been bugging some of our users
for the last couple of kernel revs. Every now and then, IPsec will
freeze the machine completely. This is with openswan user land,
and with kernels up to and including 2.6.16-rc2.
I managed to debug this a little, and what happens is that we end
up looping in xfrm_lookup, and never get out. With a bit of debug
printks added, I can this happening:
ip_route_output_flow calls xfrm_lookup
xfrm_find_bundle returns NULL (apparently we're in the
middle of negotiating a new SA or something)
We therefore call xfrm_tmpl_resolve. This returns EAGAIN
We go to sleep, waiting for a policy update.
Then we loop back to the top
Apparently, the dst_orig that was passed into xfrm_lookup
has been dropped from the routing table (obsolete=2)
This leads to the endless loop, because we now create
a new bundle, check the new bundle and find it's stale
(stale_bundle -> xfrm_bundle_ok -> dst_check() return 0)
People have been testing with the patch below, which seems to fix the
problem partially. They still see connection hangs however (things
only clear up when they start a new ping or new ssh). So the patch
is obvsiouly not sufficient, and something else seems to go wrong.
I'm grateful for any hints you may have...
I suggest that we simply bail out always. If the dst decides to die
on us later on, the packet will be dropped anyway. So there is no
great urgency to retry here. Once we have the proper resolution
queueing, we can then do the retry again.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Olaf Kirch <okir@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
- panic() doesn't return.
- Don't forget to unlock on genl_register_family() error path
- genl_rcv_msg() is called via pointer so there's no point in declaring it
`inline'.
Notes:
genl_ctrl_event() ignores the genlmsg_multicast() return value.
lots of things ignore the genl_ctrl_event() return value.
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horms patch was the best of the three fixes. Dave, already applied
Harald's version, so this patch converts that to the better one.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new x_tables related Kconfig options appear at the wrong menu level
without this patch.
Signed-off-by: Harald Welte <laforge@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Missing license tag.
I've assumed this is GPL. (It could also use a MODULE_AUTHOR)
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
isic can trigger these msgs to be spewed at a very high rate.
There's already a sysctl to turn them off. Given these messages
aren't useful for most people, this patch disables them by
default.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the two NULL pointer dereferences found by the sfuzz
tool from Ilja van Sprundel. The first one was a call of getsockname()
for an unbound socket and the second was calling accept() while this
operation isn't implemented for the HCI socket interface.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch reduces the default L2CAP MTU for all RFCOMM connections
from 1024 to 1013 to improve the interoperability with some broken
RFCOMM implementations. To make this more flexible the L2CAP MTU
becomes also a module parameter and so it can changed at runtime.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
net/bridge/br_netfilter.c: In function `br_nf_post_routing':
net/bridge/br_netfilter.c:808: warning: implicit declaration of function `has_bridge_parent'
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Cc: Harald Welte <laforge@netfilter.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Refactor how the bridge code interacts with kobject system.
It should still use kobjects even if not using sysfs.
Fix the error unwind handling in br_add_if.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bridge netfilter code needs to handle the case where device is
removed from bridge while packet in process. In these cases the
bridge_parent can become null while processing.
This should fix: http://bugzilla.kernel.org/show_bug.cgi?id=5803
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change Bridge receive path to correctly handle RCU removal of device
from bridge. Also fixes deadlock between carrier_check and del_nbp.
This replaces the previous deleted flag fix.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes an out of range array access in irnet_irda.c.
Author: David Binderman <dcb314@hotmail.com>
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch set IrDA's addr_len properly, i.e to 4 bytes, the size of the
IrLAP device address.
Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a netlink message is not related to a netlink socket,
it is issued by kernel socket with pid 0. Netlink "pid" has nothing
to do with current->pid. I called it incorrectly, if it was named "port",
the confusion would be avoided.
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink overrun was broken while improvement of netlink.
Destination socket is used in the place where it was meant to be source socket,
so that now overrun is never sent to user netlink sockets, when it should be,
and it even can be set on kernel socket, which results in complete deadlock
of rtnetlink.
Suggested fix is to restore status quo passing source socket as additional
argument to netlink_attachskb().
A little explanation: overrun is set on a socket, when it failed
to receive some message and sender of this messages does not or even
have no way to handle this error. This happens in two cases:
1. when kernel sends something. Kernel never retransmits and cannot
wait for buffer space.
2. when user sends a broadcast and the message was not delivered
to some recipients.
Signed-off-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you set network interface down and up again, the IPv6 address
autoconfiguration does not work. 'ip addr' shows that the link-local
address is in tentative state. We don't even react to periodical router
advertisements.
During NETDEV_DOWN we clear IF_READY, and we don't set it back in
NETDEV_UP. While starting to perform DAD on the link-local address, we
notice that the device is not in IF_READY, and we abort autoconfiguration
process (which would eventually send router solicitations).
Acked-by: Juha-Matti Tapio <jmtapio@verkkotelakka.net>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
A bunch of asm/bug.h includes are both not needed (since it will get
pulled anyway) and bogus (since they are done too early). Removed.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
percpu_data blindly allocates bootmem memory to store NR_CPUS instances of
cpudata, instead of allocating memory only for possible cpus.
As a preparation for changing that, we need to convert various 0 -> NR_CPUS
loops to use for_each_cpu().
(The above only applies to users of asm-generic/percpu.h. powerpc has gone it
alone and is presently only allocating memory for present CPUs, so it's
currently corrupting memory).
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@suse.de>
Cc: Anton Blanchard <anton@samba.org>
Acked-by: William Irwin <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
After DNAT the original dst_entry needs to be released if present
so the packet doesn't skip input routing with its new address. The
current check for DNAT in ip_nat_in is reversed and checks for SNAT.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IPv4 and IPv6 version of the policy match are identical besides address
comparison and the data structure used for userspace communication. Unify
the data structures to break compatiblity now (before it is released), so
we can port it to x_tables in 2.6.17.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix two bugs in ip6t_policy address matching:
- misorder arguments to ip6_masked_addrcmp, mask must be the second argument
- inversion incorrectly applied to the entire expression instead of just
the address comparison
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
netfilter's do_replace() can overflow on addition within SMP_ALIGN()
and/or on multiplication by NR_CPUS, resulting in a buffer overflow on
the copy_from_user(). In practice, the overflow on addition is
triggerable on all systems, whereas the multiplication one might require
much physical memory to be present due to the check above. Either is
sufficient to overwrite arbitrary amounts of kernel memory.
I really hate adding the same check to all 4 versions of do_replace(),
but the code is duplicate...
Found by Solar Designer during security audit of OpenVZ.org
Signed-Off-By: Kirill Korotaev <dev@openvz.org>
Signed-Off-By: Solar Designer <solar@openwall.com>
Signed-off-by: Patrck McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This memset() is executing with a bad size. According to Yasuyuki Kozakai,
this memset() can be deleted, as 'ftp' is declared in global area.
Signed-off-by: Samir Bellabes <sbellabes@mandriva.com>
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by David Ahern <dahern@avaya.com>, netfilter bugzilla #426.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The packet marked is the netlink skb, not the queued skb.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The skb allocated is always of size nlbufsize, even if that is smaller than
the size needed for the current packet.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Performance tests showed that ULOG may fail on heavy loaded systems
because of failed order-N allocations (N >= 1).
The default value of 4096 is not optimal in the sense that it actually
allocates _two_ contigous physical pages. Reasoning: ULOG uses
alloc_skb(), which adds another ~300 bytes for skb_shared_info.
This patch sets the default value to NLMSG_GOODSIZE and adds some
documentation at the top.
Signed-off-by: Holger Eitzenberger <heitzenberger@astaro.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
__nf_conntrack_{l3}proto_find() doesn't check the passed protocol family,
then it's possible to touch out of the array which has only AF_MAX items.
Spotted by Pablo Neira Ayuso.
Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add load-on-demand support for expectation request. eg. conntrack -L expect
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ctnetlink expectation events should use the NFNL_SUBSYS_CTNETLINK_EXP
subsystem, not NFNL_SUBSYS_CTNETLINK.
Signed-off-by: Marcus Sundberg <marcus@ingate.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
When two ip_route_output_key lookups in icmp_send were combined I
forgot to change the error path for ip_options_echo to not drop the
dst reference since it now sits before the dst lookup. To fix it we
simply jump past the ip_rt_put call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
If you are on a hostile network, or are running protocol tests, you can
easily get the logged swamped by messages about bad UDP and ICMP packets.
This turns those messages off unless a config option is enabled.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Acked-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This seems to be an artifact of the follwoing commit in February '02.
e7e173af42dbf37b1d946f9ee00219cb3b2bea6a
In a nutshell, goto out and return actually do the same thing,
and both are called in this function. This patch removes out.
Signed-Off-By: Horms <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Tue, Jan 31, 2006 at 10:24:32PM +0100, Ingo Molnar wrote:
>
> [<c04de9e8>] _write_lock+0x8/0x10
> [<c0499015>] inet6_destroy_sock+0x25/0x100
> [<c04b8672>] tcp_v6_destroy_sock+0x12/0x20
> [<c046bbda>] inet_csk_destroy_sock+0x4a/0x150
> [<c047625c>] tcp_rcv_state_process+0xd4c/0xdd0
> [<c047d8e9>] tcp_v4_do_rcv+0xa9/0x340
> [<c047eabb>] tcp_v4_rcv+0x8eb/0x9d0
OK this is definitely broken. We should never touch the dst lock in
softirq context. Since inet6_destroy_sock may be called from that
context due to the asynchronous nature of sockets, we can't take the
lock there.
In fact this sk_dst_reset is totally redundant since all IPv6 sockets
use inet_sock_destruct as their socket destructor which always cleans
up the dst anyway. So the solution is to simply remove the call.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The spin locks in multipath_wrandom may be obtained from either process
context or softirq context depending on whether the packet is locally
or remotely generated. Therefore we need to disable BH processing when
taking these locks.
This bug was found by Ingo's lock validator.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCTP used to "fast retransmit" a TSN every time we hit the number
of missing reports for the TSN. However the Implementers Guide
specifies that we should only "fast retransmit" a given TSN once.
Subsequent retransmits should be timeouts only. Also change the
number of missing reports to 3 as per the latest IG(similar to TCP).
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the logic in ipv6_ifa_notify is to hold an extra reference
count for addrconf dst's that get added to the routing table. Thus,
when addrconf dst entries are taken out of the routing table, we need
to drop that dst. However, addrconf dst entries may be removed from
the routing table by means other than __ipv6_ifa_notify.
So we're faced with the choice of either fixing up all places where
addrconf dst entries are removed, or dropping the extra reference count
altogether.
I chose the latter because the ifp itself always holds a dst reference
count of 1 while it's alive. This is dropped just before we kfree the
ifp object. Therefore we know that in __ipv6_ifa_notify we will always
hold that count.
This bug was found by Eric W. Biederman.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SNAP code pops off it's 5 byte header, but doesn't adjust
the checksum. This would cause problems when using device that
does IP over SNAP and hardware receive checksums.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a bug whereby if two processes try to look up the same auth_gss
credential, they may end up creating two creds, and triggering two upcalls
because the upcall is performed before the credential is added to the
credcache.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The function rpc_timeout_upcall_queue runs from a workqueue, and hence
sleeping is not recommended. Convert the protection of the upcall queue
from being mutex-based to being spinlock-based.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we look up a new cred in the auth_gss downcall so that we can stuff
the credcache, we do not want that lookup to queue up an upcall in order
to initialise it. To do an upcall here not only redundant, but since we
are already holding the inode->i_mutex, it will trigger a lock recursion.
This patch allows rpcauth cache searches to indicate that they can cope
with uninitialised credentials.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix the syntax of some kernel-doc comments
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
It was copy&pasted from tcp_v6_send_synack() which has
a DST leak recently fixed by Eric W. Biederman.
So dccp_v6_send_response() needs the same fix too.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fix dst reference counting in tcp_v6_send_synack
Analysis:
Currently tcp_v6_send_synack is never called with a dst entry
so dst always comes in as NULL.
ip6_dst_lookup calls ip6_route_output which calls dst_hold
before it returns the dst entry. Neither xfrm_lookup
nor tcp_make_synack consume the dst entry so we still have
a dst_entry with a bumped refrence count at the end of
this function.
Therefore we need to call dst_release just before we return
just like tcp_v4_send_synack does.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_bind_bucket_create was exported twice. Keep the export in the
file where inet_bind_bucket_create is defined.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a simpler fix for the two races in bridge device removal.
The Xen race of delif and notify is managed now by a new deleted flag.
No need for barriers or other locking because of rtnl mutex.
The del_timer_sync()'s are unnecessary, because br_stp_disable_port
delete's the timers, and they will finish running before RCU callback.
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip_route_newports uses the struct flowi from the struct rtable returned
by ip_route_connect for the new route lookup and just replaces the port
numbers if they have changed. If an IPsec policy exists which doesn't match
port 0 the struct flowi won't have the proto field set and no xfrm lookup
is done for the changed ports.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modern versions of gcc do not like case statements at the end of a block
statement: you need at least an empty statement. Using just a "break;"
is preferred for visual style.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This fixes the accounting in H-TCP, the ccount variable is also
adjusted a few lines above this one.
This line was not supposed to be there and wasn't there in the patches
originally submitted, the four patches submitted were merged to one
and in that merge the bug was introduced.
Signed-Off-By: Baruch Even <baruch@ev-en.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is easily triggerable by sending bogus packets,
allowing a malicious user to flood remote logs.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of HEARTBEAT chunks that an association may transmit is
limited by Association.Max.Retrans count; however, the code allows
us to send one extra heartbeat.
This patch limits the number of heartbeats to the maximum count.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently count the initial INIT/COOKIE_ECHO chunk toward the
retransmit count and thus sends a total of sctp_max_retrans_init chunks.
The correct behavior is to retransmit the chunk sctp_max_retrans_init in
addition to sending the original.
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch, generated against 2.6.16-rc1-git4, corrects two typographical
errors in ieee80211_rx.c and adds the facility name to a bare printk.
Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Limit the amount of output given to iwlist scan.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The code for pulling the key to use for decrypt was correctly using
the host_mc_decrypt flag. The code that actually decrypted,
however, was based on host_decrypt. This patch changes this
behavior.
Signed-off-by: Etay Bogner <etay.bogner@gmail.com>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The following patch fixes these problems in MLDv2:
1) Add/remove "delete" records for sending change reports when
addition of a filter results in that filter transitioning to/from
inactive. [same as recent IPv4 IGMPv3 fix]
2) Remove 2 redundant "group_type" checks (can't be IPV6_ADDR_ANY
within that loop, so checks are always true)
3) change an is_in() "return 0" to "return type == MLD2_MODE_IS_INCLUDE".
It should always be "0" to get here, but it improves code locality
to not assume it, and if some race allowed otherwise, doing
the check would return the correct result.
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When returning a message to userspace in reply to a SADB_FLUSH or
SADB_X_SPDFLUSH message, the type was not set for the returned PFKEY
message. The patch below corrects this problem.
Signed-off-by: Jerome Borsboom <j.borsboom@erasmusmc.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
This information is already available via /proc/net/bonding/*
therefore it doesn't make sense to require CAP_NET_ADMIN
privileges.
Original patch by Laurent Deniel <laurent.deniel@free.fr>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the error path if we allocated an fclone then we will free it in
the wrong pool.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes some whitespace issues in net/core/filter.c
Signed-off-by: Kris Katterjohn <kjak@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
EDAC requires a way to scrub memory if an ECC error is found and the chipset
does not do the work automatically. That means rewriting memory locations
atomically with respect to all CPUs _and_ bus masters. That means we can't
use atomic_add(foo, 0) as it gets optimised for non-SMP
This adds a function to include/asm-foo/atomic.h for the platforms currently
supported which implements a scrub of a mapped block.
It also adjusts a few other files include order where atomic.h is included
before types.h as this now causes an error as atomic_scrub uses u32.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Allow mechanisms to return more varied errors on the context creation
downcall.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
We require the server's gssd to create a completed context before asking the
kernel to send a final context init reply. However, gssd could be buggy, or
under some bizarre circumstances we might purge the context from our cache
before we get the chance to use it here.
Handle this case by returning GSS_S_NO_CONTEXT to the client.
Also move the relevant code here to a separate function rather than nesting
excessively.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kerberos context initiation is handled in a single round trip, but other
mechanisms (including spkm3) may require more, so we need to handle the
GSS_S_CONTINUE case in svcauth_gss_accept. Send a null verifier.
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The server code currently keeps track of the destination address on every
request so that it can reply using the same address. However we forget to do
that in the case of a deferred request. Remedy this oversight. >From folks
at PolyServe.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1) fix "mld_marksources()" to
a) send nothing when all queried sources are excluded
b) send full exclude report when source queried sources are
not excluded
c) don't schedule a timer when there's nothing to report
2) fix "add_grec()" to send empty-source records when it should
The original check doesn't account for a non-empty source
list with all sources inactive; the new code keeps that
short-circuit case, and also generates the group header
with an empty list if needed.
3) fix mca_crcount decrement to be after add_grec(), which needs
its original value
4) add/remove delete records and prevent current advertisements
when an exclude-mode filter moves from "active" to "inactive"
or vice versa based on new filter additions.
Items 1-3 are just IPv4 versions of the IPv6 bugs found
by Yan Zheng and fixed earlier. Item #4 is a related bug that
affects exclude-mode change records only (but not queries) and
also occurs in IPv6 (IPv6 version coming soon).
Signed-off-by: David L Stevens <dlstevens@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim
Patrick McHardy