The debugfs code is really generic for all platforms. This patch removes the
powerpc-specific directory reference and makes it available to all
architectures.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
We were not noticing it because symbol__inc_addr_samples was erroneously
dropping samples that hit the last byte in a function.
Working on a fix for a problem reported by David Miller, Stephane
Eranian and Sorin Dumitru, where addresses < sym->start were causing
problems, I noticed this other problem.
Cc: David Ahern <dsahern@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sorin Dumitru <dumitru.sorin87@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-pqjaq4cr1xs2xen73pjhbav4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
From Tony Lindgren:
"This contains the updated gpio_to_irq patches from Tarun, and a trivial
build fix from Govindraj to #include <asm/system_misc.h> in pm.c.
The DSI mux patch is the same."
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: pm: fix compilation break
ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition
drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()
ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
ARM: OMAP2+: Remove __init from DSI mux functions
Pull the intel i915 hibernation memory corruption fix from Dave Airlie:
"I tracked down the misc memory corruption after i915 hibernate to the
blinking fbcon cursor, and realised the i915 driver wasn't doing the
fbdev suspend/resume calls at all. nouveau and radeon have done these
calls for a long time.
This has been fairly well tested and is definitely the main culprit in
hibernate not working."
Yay.
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: suspend fbdev device around suspend/hibernate
* 'for-3.4/fixes-for-rc1-and-v3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: Fix device tree AUXDATA for USB/EHCI
During a complex merge for v3.4, one line of the commit
c20b909be9 ("ARM: LPC32xx: Ethernet support") was
reverted wrongly ("lpc-eth.0" -> "lpc-net.0") while the other conflicts were
merged correctly. This patch re-applies the clock name "lpc-eth.0".
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
turbostat -s
cuts down on the amount of output, per user request.
also treak some output whitespace and the man page.
Signed-off-by: Len Brown <len.brown@intel.com>
Fix the compilation break observed on latest mainline caused
by 9f97da78 (Disintegrate asm/system.h for ARM):
arch/arm/mach-omap1/pm.c: In function 'omap_pm_prepare':
arch/arm/mach-omap1/pm.c:587: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_finish':
arch/arm/mach-omap1/pm.c:624: error: implicit declaration of function 'enable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_init':
arch/arm/mach-omap1/pm.c:681: error: 'arm_pm_idle' undeclared (first use in this function)
...
arch/arm/mach-omap2/pm.c: In function 'omap_pm_begin':
arch/arm/mach-omap2/pm.c:239: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap2/pm.c: In function 'omap_pm_end':
arch/arm/mach-omap2/pm.c:247: error: implicit declaration of function 'enable_hlt'
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[tony@atomide.com: updated to fix omap1 too]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Fix module parameter data type to eliminate build warnings.
sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type
sound/isa/opti9xx/opti92x-ad1848.c:87:1: warning: return from incompatible pointer type
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix module parameter data type to eliminate build warning.
sound/oss/msnd_pinnacle.c:1727:1: warning: return from incompatible pointer type
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cleanup of the dmaengine parameter messup and a tweak to some
callibration values for WM1811.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJPdETyAAoJEBus8iNuMP3d7moQAJdyO48uOt717D+BLP77ri+u
U09DP4TSprqWIS1sSgxJcP3fnQs5nFyqyDyjXkV6P0KjHtK2VE0xAS5uaO0sddS7
6VBqFiyhfl9XbdDieu4qY9qdaeJL3idvo3Gqi+bjlY2Q3gnZeSx+nefW7vG6hyK8
SNXM9Cya66/eNfIt3DklQ34926lnHPN/Oz9WPqNs3c9ROJeoQzOsVSe8PLSP2ZIM
HitNbqZjxZXVC8Jytd56qwLmlIvikrX0UUmROkhuEwYMfa2lnWEGP72OtIT7udKE
G9NB/eaFK2ddB2pVv+lnkx6qm9ZYrGoiiyqfU9QbVplP8VE5sRJmdzaVbMmgDPpm
pYoSgVGs/ajiiC0SFQdAdSdwsngMSpbBopv9ri/HPRkVNM3AznpBg58AbESR5SM9
cc/iLRjTMNCc1Vv5xLdRO2BAYGtFQSZcknwDjZe50eDYv0cEjDG5R3+rvU8Wic15
T0umDIn8J0jv8e1yxN6qDGRicxM5H4uo2ZOfMgKwYRgGm5DgN8mnopOBd97/RXSS
cV8JpYvys6zPlxIsDTQ6fqQW0ywHq5IZD1F/u2o3HKRVi9nd8hM5d9urtOIr/nlZ
M4yLPHCsp+no37pexiHlIbW/X8WdeEXZL7NVRYDmyX6JFsctqTWtso/SnwGOn2J8
lXqw7Msl1fstcHkjb/5G
=XZ+C
-----END PGP SIGNATURE-----
Merge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: A few more updates for 3.4
The cleanup of the dmaengine parameter messup and a tweak to some
callibration values for WM1811.
Since all references to OMAP_GPIO_IRQ macro are replaced now
with gpio_to_irq(), this can be removed altogether.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Even though ams-delta-serio input driver uses gpio_to_irq() in all
relevent places to get irq number, the ams_delta_serio_exit() still
uses OMAP_GPIO_IRQ macro. Fix this.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The following commits change gpio-omap to use dynamic
IRQ allocation:
25db711 gpio/omap: Fix IRQ handling for SPARSE_IRQ
384ebe1 gpio/omap: Add DT support to GPIO driver
With dynamic allocation of IRQ the usage of OMAP_GPIO_IRQ
is no longer valid. We must be using gpio_to_irq() instead.
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com>
[tony@atomide.com: updated comments]
Signed-off-by: Tony Lindgren <tony@atomide.com>
The commit 89812fc81f ("perf tools: Add parser generator for events
parsing") changed event parsing engine but missed the ref-cycles event.
Add it.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1333016517-10591-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we use autodefrag, we forget to update the index which indicates
the last page we've dirty. And we'll set dirty flags on a same set of
pages again and again.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
$ mkfs.btrfs /dev/sdb7
$ mount /dev/sdb7 /mnt/btrfs/ -oautodefrag
$ dd if=/dev/zero of=/mnt/btrfs/foobar bs=4k count=10 oflag=direct 2>/dev/null
$ filefrag -v /mnt/btrfs/foobar
Filesystem type is: 9123683e
File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3072 10 eof
/mnt/btrfs/foobar: 1 extent found
Now we have a big real extent [0, 40960), but autodefrag will still defrag it.
$ sync
$ filefrag -v /mnt/btrfs/foobar
Filesystem type is: 9123683e
File size of /mnt/btrfs/foobar is 40960 (10 blocks, blocksize 4096)
ext logical physical expected length flags
0 0 3082 10 eof
/mnt/btrfs/foobar: 1 extent found
So if we already find a big real extent, we're ok about that, just skip it.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
If our file's layout is as follows:
| hole | data1 | hole | data2 |
we do not need to defrag this file, because this file has holes and
cannot be merged into one extent.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
$ mkfs.btrfs disk
$ mount disk /mnt -o autodefrag
$ dd if=/dev/zero of=/mnt/foobar bs=4k count=10 2>/dev/null && sync
$ for i in `seq 9 -2 0`; do dd if=/dev/zero of=/mnt/foobar bs=4k count=1 \
seek=$i conv=notrunc 2> /dev/null; done && sync
then we'll get to defrag "foobar" again and again.
So does option "-o autodefrag,compress".
Reasons:
When the cleaner kthread gets to fetch inodes from the defrag tree and defrag
them, it will dirty pages and submit them, this will comes to another DATA COW
where the processing inode will be inserted to the defrag tree again.
This patch sets a rule for COW code, i.e. insert an inode when we're really
going to make some defragments.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
commit 600a45e1d5
(Btrfs: fix deadlock on page lock when doing auto-defragment)
fixes the deadlock on page, but it also introduces another bug.
A page may have been truncated after unlock & lock.
So we need to find it again to get the right one.
And since we've held i_mutex lock, inode size remains unchanged and
we can drop isize overflow checks.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
The bug is from running xfstests 209 with autodefrag.
The race is as follows:
t1 t2(autodefrag)
direct IO
invalidate pagecache
dio(old data) add_inode_defrag
invalidate pagecache
endio
direct IO
invalidate pagecache
run_defrag
readpage(old data)
set page dirty (old data)
dio(new data, rewrite)
invalidate pagecache (*)
endio
t2(autodefrag) will get old data into pagecache via readpage and set
pagecache dirty. Meanwhile, invalidate pagecache(*) will fail due to
dirty flags in pages. So the old data may be flushed into disk by
flush thread, which will lead to data loss.
And so does the case of user defragment progs.
The patch fixes this race by holding i_mutex when we readpage and set page dirty.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This deadlock comes from xfstests 251.
We'll hold the chunk_mutex throughout the whole of a chunk allocation.
But if we find that we've used up system chunk space, we need to allocate a
new system chunk, but this will lead to a recursion of chunk allocation and end
up with a deadlock on chunk_mutex.
So instead we need to allocate the system chunk first if we find we're in ENOSPC.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
o For space info, the type of space info is useful for debug.
o For transaction handle, its transid is useful.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Otherwise, we get a warning or error similar to this when building with
CONFIG_NFSD_V4 disabled:
ERROR: "nfsd4_cld_block" [fs/nfsd/nfsd.ko] undefined!
Fix this by wrapping the calls to rpc_pipefs_notifier_register and
..._unregister in another function and providing no-op replacements
when CONFIG_NFSD_V4 is disabled.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Notify get_robust_list users that the syscall is going away.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120323190855.GA27213@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It was possible to extract the robust list head address from a setuid
process if it had used set_robust_list(), allowing an ASLR info leak. This
changes the permission checks to be the same as those used for similar
info that comes out of /proc.
Running a setuid program that uses robust futexes would have had:
cred->euid != pcred->euid
cred->euid == pcred->uid
so the old permissions check would allow it. I'm not aware of any setuid
programs that use robust futexes, so this is just a preventative measure.
(This patch is based on changes from grsecurity.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: kernel-hardening@lists.openwall.com
Cc: spender@grsecurity.net
Link: http://lkml.kernel.org/r/20120319231253.GA20893@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We respect node affinity of devices already in the irq descriptor
allocation, but we ignore it for the initial interrupt affinity
setup, so the interrupt might be routed to a different node.
Restrict the default affinity mask to the node on which the irq
descriptor is allocated.
[ tglx: Massaged changelog ]
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Link: http://lkml.kernel.org/r/1332788538-17425-1-git-send-email-prarit@redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The only place irq_finalize_oneshot() is called with force parameter set
is the threaded handler error exit path. But IRQTF_RUNTHREAD is dropped
at this point and irq_wake_thread() is not going to set it again,
since PF_EXITING is set for this thread already. So irq_finalize_oneshot()
will drop the threads bit in threads_oneshot anyway and hence the force
parameter is superfluous.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120321162234.GP24806@dhcp-26-207.brq.redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
exit_irq_thread() clears IRQTF_RUNTHREAD flag and drops the thread's bit in
desc->threads_oneshot then. The bit must not be set again in between and it
does not, since irq_wake_thread() sees PF_EXITING flag first and returns.
Due to above the order or checking PF_EXITING and IRQTF_RUNTHREAD flags in
irq_wake_thread() is important. This change just makes it more visible in the
source code.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Link: http://lkml.kernel.org/r/20120321162212.GO24806@dhcp-26-207.brq.redhat.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This adopts a trimmed down version of the MIPS port mangling interface
limited to the I/O swabbing for platforms that can't use little endian
accessors. For platforms with mixed I/O spaces involving PCI it will
still be necessary to enable byte swapping at the host controller level.
Attention needs to be paid to all of host controller endianness, CPU
endianness, and whether I/O accesses are explicitly swapped or not via
SWAP_IO_SPACE. Fortunately the platforms that need this are in the
minority.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Looking at hibernate overwriting I though it looked like a cursor,
so I tracked down this missing piece to stop the cursor blink
timer. I've no idea if this is sufficient to fix the hibernate
problems people are seeing, but please test it.
Both radeon and nouveau have done this for a long time.
I've run this personally all night hib/resume cycles with no fails.
Reviewed-by: Keith Packard <keithp@keithp.com>
Reported-by: Petr Tesarik <kernel@tesarici.cz>
Reported-by: Stanislaw Gruszka <sgruszka@redhat.com>
Reported-by: Lots of misc segfaults after hibernate across the world.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=37142
Tested-by: Dave Airlie <airlied@redhat.com>
Tested-by: Bojan Smojver <bojan@rexursive.com>
Tested-by: Andreas Hartmann <andihartmann@01019freenet.de>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
If schedule is called from an interrupt handler __schedule_bug()
will call show_regs() with the registers saved during the
interrupt handling done in do_IRQ(). This means we'll see the
registers and the backtrace for the process that was interrupted
and not the full backtrace explaining who called schedule().
This is due to 838225b ("sched: use show_regs() to improve
__schedule_bug() output", 2007-10-24) which improperly assumed
that get_irq_regs() would return the registers for the current
stack because it is being called from within an interrupt
handler. Simply remove the show_reg() code so that we dump a
backtrace for the interrupt handler that called schedule().
[ I ran across this when I was presented with a scheduling while
atomic log with a stacktrace pointing at spin_unlock_irqrestore().
It made no sense and I had to guess what interrupt handler could
be called and poke around for someone calling schedule() in an
interrupt handler. A simple test of putting an msleep() in
an interrupt handler works better with this patch because you
can actually see the msleep() call in the backtrace. ]
Also-reported-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Satyam Sharma <satyam@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1332979847-27102-1-git-send-email-sboyd@codeaurora.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=T4T+
-----END PGP SIGNATURE-----
Merge tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Pull MMC updates from Chris Ball:
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...
Pull trivial exofs changes from Boaz Harrosh:
"Just nothingness really. The big exofs changes are reserved for the
next merge window."
* 'for-linus' of git://git.open-osd.org/linux-open-osd:
exofs: Cap on the memcpy() size
exofs: (trivial) Fix typo in super.c
exofs: fix endian conversion in exofs_sync_fs()
Highlights include:
- Fix infinite loops in the mount code
- Fix a userspace buffer overflow in __nfs4_get_acl_uncached
- Fix a memory leak due to a double reference count in rpcb_getport_async()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=yiL7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes for Linux 3.4 from Trond Myklebust
Highlights include:
- Fix infinite loops in the mount code
- Fix a userspace buffer overflow in __nfs4_get_acl_uncached
- Fix a memory leak due to a double reference count in rpcb_getport_async()
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* tag 'nfs-for-3.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Minor cleanups for nfs4_handle_exception and nfs4_async_handle_error
NFSv4.1: Fix layoutcommit error handling
NFSv4: Fix two infinite loops in the mount code
SUNRPC: Use the already looked-up xprt in rpcb_getport_async()
NFS4.1: remove duplicate variable declaration in filelayout_clear_request_commit
Fix length of buffer copied in __nfs4_get_acl_uncached
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=ywVL
-----END PGP SIGNATURE-----
Merge tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next
Pull squashfs updates from Phillip Lougher:
"Add an extra mount time sanity check, plus some code cleanups and bug
fixes."
* tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next:
Squashfs: add mount time sanity check for block_size and block_log match
Squashfs: fix f_pos check in get_dir_index_using_offset
Squashfs: get rid of obsolete definitions in header file
Squashfs: remove redundant length initialisation in squashfs_lookup
Squashfs: remove redundant length initialisation in squashfs_readdir
Squashfs: update comment removing reference to zlib only
Squashfs: use define instead of constant
With the big metadata blocks, we can have crc items
that are much bigger than a page. There are a few
places that we try to kmalloc memory to hold the
items during a split.
Items bigger than 4KB don't really have a huge benefit
in efficiency, but they do trigger larger order allocations.
This commits changes the csums to make sure they stay under
4KB. This is not a format change, just a #define to limit
huge items.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Btrfs puts the filesystem metadata into its own address space, and
somehow the block device address space isn't getting onto disk properly
before a mount. The end result is that a loop of mkfs and mounting the
filesystem will sometimes find stale or incorrect data.
This commit should fix it by sprinkling fdatawrites and invalidate_bdev
calls around. This is a short term measure to make sure it is fixed.
The block devices really should be flushed and cleaned up higher in the
stack.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
With support for bigger metadata blocks, we must avoid mounting a
filesystem with different block size for mixed block groups, this causes
corruption (found by xfstests/083).
Signed-off-by: David Sterba <dsterba@suse.cz>
Merge third batch of patches from Andrew Morton:
- Some MM stragglers
- core SMP library cleanups (on_each_cpu_mask)
- Some IPI optimisations
- kexec
- kdump
- IPMI
- the radix-tree iterator work
- various other misc bits.
"That'll do for -rc1. I still have ~10 patches for 3.4, will send
those along when they've baked a little more."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
backlight: fix typo in tosa_lcd.c
crc32: add help text for the algorithm select option
mm: move hugepage test examples to tools/testing/selftests/vm
mm: move slabinfo.c to tools/vm
mm: move page-types.c from Documentation to tools/vm
selftests/Makefile: make `run_tests' depend on `all'
selftests: launch individual selftests from the main Makefile
radix-tree: use iterators in find_get_pages* functions
radix-tree: rewrite gang lookup using iterator
radix-tree: introduce bit-optimized iterator
fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
nbd: rename the nbd_device variable from lo to nbd
pidns: add reboot_pid_ns() to handle the reboot syscall
sysctl: use bitmap library functions
ipmi: use locks on watchdog timeout set on reboot
ipmi: simplify locking
ipmi: fix message handling during panics
ipmi: use a tasklet for handling received messages
ipmi: increase KCS timeouts
ipmi: decrease the IPMI message transaction time in interrupt mode
...
Grant Likely