This 2nd batch of implicit module.h users only appeared when we
removed the unnecessary module.h from include/linux/miscdevice.h
[The 1st batch is already present in Greg's staging tree.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fix a dumb lack of consideration of the effect of combining
the iio_device_unregister and iio_free_device calls into
one. There is no valid place to free some of the sysfs
array elements.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Numerous drivers either had pointless includes of gpio.h
or should have been dependent on GENERIC_GPIO and were not.
Conversion of ads1210 to use array registration triggered
build failures that highlighted all was not well.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We had a random missmatch of these two. Lets pick the most common
and get rid of the other.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The error_ret label should have been before the mutex_unlock(). It's
a typo.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver ported over to hwmon where it fits much better.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
fixes these build problems:
drivers/staging/iio/adc/ad7746.c:345:8: error: 'S_IWUSR' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:436:8: error: 'S_IRUGO' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:681:19: error: 'THIS_MODULE' undeclared here (not in a function)
drivers/staging/iio/adc/ad7746.c:778:1: warning: data definition has no type or storage class [enabled by default]
drivers/staging/iio/adc/ad7746.c:778:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Wimplicit-int]
drivers/staging/iio/adc/ad7746.c:778:1: warning: parameter names (without types) in function declaration [enabled by default]
drivers/staging/iio/adc/ad7746.c:799:15: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:800:20: error: expected declaration specifiers or '...' before string constant
drivers/staging/iio/adc/ad7746.c:801:16: error: expected declaration specifiers or '...' before string constant
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since they are assuming it is there implicitly and will fail otherwise
with things like:
drivers/staging/iio/impedance-analyzer/ad5933.c:816: warning: type
defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’
drivers/staging/iio/adc/ad7280a.c:990: warning: type defaults to ‘int’
in declaration of ‘MODULE_AUTHOR’
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
These are now handled through the chan_spec arrays and no one
is using them anymore.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
id wasn't used anywhere and st->irq can be removed by simply
passing it into the core remove function (trivially available in
the two bus implementations).
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Other than a few slight refactorings the local version was pretty standard
so replace it and rework to get rid of st->d_size which it setup.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
To my mind, if a gpio is specified in the board file, yet fails
to be successfully requested, that is an error condidtion and
the driver should not muddle on regardless.
This does mean unwinding the gpios on error. Also the free_gpios
function is reordered so that it is consistent with the request one
(reverse order obviously).
This patch is the category of not technically fixing anything, just
making the driver be more in line with what a reviewer will expect.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IIO_CHAN is being phased out and in this case things are so
simple it makes sense to have a local one parameter equivalent.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Saves on setting the value of address for the simple situation seen in this
device. They are already used interchangably to get data from the buffer.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is much cleaner than bouncing through the various structures
to get to the same thing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Preparation for moving driver out of staging.
That macro is a nightmare to maintain so it is going away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A few of these had the wrong shifts, which would lead to
userspace hacking off the top couple of bits. Also, one
part had the wrong accuracy.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This was originally there to avoid churn during a complex change.
Now everything is stable lets get rid of this as it is missleading
and confusing.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
They aren't always ring buffers, so just use buffer for all naming.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nothing in this file is specific to RING buffers so rename it.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
also, IIO_RING_HARDWARE_BUFFER -> IIO_BUFFER_HARDWARE
These aren't always rings so the naming should not imply that.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not always a ring so naming is missleading.
Also, kfifo_buf is probably first buffer to take out of staging and it
definitely isn't a ring.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We have a lot of drivers now, so the iio sub menu becomes quite large.
This patch creates sub menus for the different sensors.
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The existing ad7745 driver didn't conform with the IIO spec for such devices.
It was way simpler to rewrite the existing driver, than actually fixing it.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Cleaner and more consistent naming + makes one abi element we don't need
go away.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch set should bring all the attributes created outside
of chan_spec registration inline with the new abi.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In case the AD7153 is selected we need to make sure we provide channel info
for the first capacitance input in both single ended and differential
configuration.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
AD7291_T_SENSE_MASK must set bit-7.
Change definition style.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make clear the AD7291 is primarily an ADC, and not a temp sensor.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ideally in_voltageX_raw should map to AD7291 VINX.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also add some locking.
Some major changes to how this driver works.
For voltage channels it is currently either in single read mode or in
a monitor mode (events only). Could be much cleverer and allow
reading of any channels that happend to be monitored, but haven't
done that yet.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Michael Hennerich <Michael.Hennerich@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Paul Gortmaker