dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

226 Commits

Author SHA1 Message Date
Andre Przywara f7c6d14003 KVM: fix MMIO_CONF_BASE MSR access
Some Windows versions check whether the BIOS has setup MMI/O for
config space accesses on AMD Fam10h CPUs, we say "no" by returning 0 on
reads and only allow disabling of MMI/O CfgSpace setup by igoring "0" writes.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:10 +03:00
Jan Kiszka dc7e795e3d Revert "KVM: x86: check for cr3 validity in ioctl_set_sregs"
This reverts commit 6c20e1442bb1c62914bb85b7f4a38973d2a423ba.

To my understanding, it became obsolete with the advent of the more
robust check in mmu_alloc_roots (89da4ff17f). Moreover, it prevents
the conceptually safe pattern

 1. set sregs
 2. register mem-slots
 3. run vcpu

by setting a sticky triple fault during step 1.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:09 +03:00
Andre Przywara 6098ca939e KVM: handle AMD microcode MSR
Windows 7 tries to update the CPU's microcode on some processors,
so we ignore the MSR write here. The patchlevel register is already handled
(returning 0), because the MSR number is the same as Intel's.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:08 +03:00
Gleb Natapov 0105d1a526 KVM: x2apic interface to lapic
This patch implements MSR interface to local apic as defines by x2apic
Intel specification.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:08 +03:00
Gleb Natapov fc61b800f9 KVM: Add Directed EOI support to APIC emulation
Directed EOI is specified by x2APIC, but is available even when lapic is
in xAPIC mode.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:07 +03:00
Avi Kivity aec51dc4f1 KVM: Trace mmio
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:07 +03:00
Andre Przywara c323c0e5f0 KVM: Ignore PCI ECS I/O enablement
Linux guests will try to enable access to the extended PCI config space
via the I/O ports 0xCF8/0xCFC on AMD Fam10h CPU. Since we (currently?)
don't use ECS, simply ignore write and read attempts.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:06 +03:00
Michael S. Tsirkin bda9020e24 KVM: remove in_range from io devices
This changes bus accesses to use high-level kvm_io_bus_read/kvm_io_bus_write
functions. in_range now becomes unused so it is removed from device ops in
favor of read/write callbacks performing range checks internally.

This allows aliasing (mostly for in-kernel virtio), as well as better error
handling by making it possible to pass errors up to userspace.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:05 +03:00
Michael S. Tsirkin 108b56690f KVM: switch pit creation to slots_lock
switch pit creation to slots_lock. slots_lock is already taken for read
everywhere, so we only need to take it for write when creating pit.
This is in preparation to removing in_range and kvm->lock around it.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:05 +03:00
Andre Przywara ed85c06853 KVM: introduce module parameter for ignoring unknown MSRs accesses
KVM will inject a #GP into the guest if that tries to access unhandled
MSRs. This will crash many guests. Although it would be the correct
way to actually handle these MSRs, we introduce a runtime switchable
module param called "ignore_msrs" (defaults to 0). If this is Y, unknown
MSR reads will return 0, while MSR writes are simply dropped. In both cases
we print a message to dmesg to inform the user about that.

You can change the behaviour at any time by saying:

 # echo 1 > /sys/modules/kvm/parameters/ignore_msrs

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:03 +03:00
Andre Przywara 1fdbd48c24 KVM: ignore reads from AMDs C1E enabled MSR
If the Linux kernel detects an C1E capable AMD processor (K8 RevF and
higher), it will access a certain MSR on every attempt to go to halt.
Explicitly handle this read and return 0 to let KVM run a Linux guest
with the native AMD host CPU propagated to the guest.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:03 +03:00
Andre Przywara 8f1589d95e KVM: ignore AMDs HWCR register access to set the FFDIS bit
Linux tries to disable the flush filter on all AMD K8 CPUs. Since KVM
does not handle the needed MSR, the injected #GP will panic the Linux
kernel. Ignore setting of the HWCR.FFDIS bit in this MSR to let Linux
boot with an AMD K8 family guest CPU.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:02 +03:00
Marcelo Tosatti 894a9c5543 KVM: x86: missing locking in PIT/IRQCHIP/SET_BSP_CPU ioctl paths
Correct missing locking in a few places in x86's vm_ioctl handling path.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:33:02 +03:00
Andre Przywara 0cb5762ed2 KVM: Allow emulation of syscalls instructions on #UD
Add the opcodes for syscall, sysenter and sysexit to the list of instructions
handled by the undefined opcode handler.

Signed-off-by: Christoph Egger <christoph.egger@amd.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:59 +03:00
Marcelo Tosatti 229456fc34 KVM: convert custom marker based tracing to event traces
This allows use of the powerful ftrace infrastructure.

See Documentation/trace/ for usage information.

[avi, stephen: various build fixes]
[sheng: fix control register breakage]

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:59 +03:00
Gleb Natapov 6edf14d8d0 KVM: Replace pending exception by PF if it happens serially
Replace previous exception with a new one in a hope that instruction
re-execution will regenerate lost exception.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:56 +03:00
Andre Przywara 71db602322 KVM: Move performance counter MSR access interception to generic x86 path
The performance counter MSRs are different for AMD and Intel CPUs and they
are chosen mainly by the CPUID vendor string. This patch catches writes to
all addresses (regardless of VMX/SVM path) and handles them in the generic
MSR handler routine. Writing a 0 into the event select register is something
we perfectly emulate ;-), so don't print out a warning to dmesg in this
case.
This fixes booting a 64bit Windows guest with an AMD CPUID on an Intel host.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:54 +03:00
Gleb Natapov 988a2cae6a KVM: Use macro to iterate over vcpus.
[christian: remove unused variables on s390]

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:52 +03:00
Gleb Natapov c5af89b68a KVM: Introduce kvm_vcpu_is_bsp() function.
Use it instead of open code "vcpu_id zero is BSP" assumption.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:51 +03:00
Avi Kivity 43a3795a3a KVM: MMU: Adjust pte accessors to explicitly indicate guest or shadow pte
Since the guest and host ptes can have wildly different format, adjust
the pte accessor names to indicate on which type of pte they operate on.

No functional changes.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:51 +03:00
Marcelo Tosatti fa40a8214b KVM: switch irq injection/acking data structures to irq_lock
Protect irq injection/acking data structures with a separate irq_lock
mutex. This fixes the following deadlock:

CPU A                               CPU B
kvm_vm_ioctl_deassign_dev_irq()
  mutex_lock(&kvm->lock);            worker_thread()
  -> kvm_deassign_irq()                -> kvm_assigned_dev_interrupt_work_handler()
    -> deassign_host_irq()               mutex_lock(&kvm->lock);
      -> cancel_work_sync() [blocked]

[gleb: fix ia64 path]

Reported-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:49 +03:00
Avi Kivity 6de4f3ada4 KVM: Cache pdptrs
Instead of reloading the pdptrs on every entry and exit (vmcs writes on vmx,
guest memory access on svm) extract them on demand.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:46 +03:00
Gregory Haskins d76685c4a0 KVM: cleanup io_device code
We modernize the io_device code so that we use container_of() instead of
dev->private, and move the vtable to a separate ops structure
(theoretically allows better caching for multiple instances of the same
ops structure)

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:45 +03:00
Jan Kiszka c5ff41ce66 KVM: Allow PIT emulation without speaker port
The in-kernel speaker emulation is only a dummy and also unneeded from
the performance point of view. Rather, it takes user space support to
generate sound output on the host, e.g. console beeps.

To allow this, introduce KVM_CREATE_PIT2 which controls in-kernel
speaker port emulation via a flag passed along the new IOCTL. It also
leaves room for future extensions of the PIT configuration interface.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:41 +03:00
Gregory Haskins 721eecbf4f KVM: irqfd
KVM provides a complete virtual system environment for guests, including
support for injecting interrupts modeled after the real exception/interrupt
facilities present on the native platform (such as the IDT on x86).
Virtual interrupts can come from a variety of sources (emulated devices,
pass-through devices, etc) but all must be injected to the guest via
the KVM infrastructure.  This patch adds a new mechanism to inject a specific
interrupt to a guest using a decoupled eventfd mechnanism:  Any legal signal
on the irqfd (using eventfd semantics from either userspace or kernel) will
translate into an injected interrupt in the guest at the next available
interrupt window.

Signed-off-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:41 +03:00
Gleb Natapov 787ff73637 KVM: Drop interrupt shadow when single stepping should be done only on VMX
The problem exists only on VMX. Also currently we skip this step if
there is pending exception. The patch fixes this too.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:41 +03:00
Mark McLoughlin cb007648de KVM: fix cpuid E2BIG handling for extended request types
If we run out of cpuid entries for extended request types
we should return -E2BIG, just like we do for the standard
request types.

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:39 +03:00
Jaswinder Singh Rajput 60af2ecdc5 KVM: Use MSR names in place of address
Replace 0xc0010010 with MSR_K8_SYSCFG and 0xc0010015 with MSR_K7_HWCR.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:39 +03:00
Huang Ying 890ca9aefa KVM: Add MCE support
The related MSRs are emulated. MCE capability is exported via
extension KVM_CAP_MCE and ioctl KVM_X86_GET_MCE_CAP_SUPPORTED.  A new
vcpu ioctl command KVM_X86_SETUP_MCE is used to setup MCE emulation
such as the mcg_cap. MCE is injected via vcpu ioctl command
KVM_X86_SET_MCE. Extended machine-check state (MCG_EXT_P) and CMCI are
not implemented.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:39 +03:00
Jaswinder Singh Rajput af24a4e4ae KVM: Replace MSR_IA32_TIME_STAMP_COUNTER with MSR_IA32_TSC of msr-index.h
Use standard msr-index.h's MSR declaration.

MSR_IA32_TSC is better than MSR_IA32_TIME_STAMP_COUNTER as it also solves
80 column issue.

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-09-10 08:32:38 +03:00
Marcelo Tosatti d6289b9365 KVM: x86: verify MTRR/PAT validity
Do not allow invalid memory types in MTRR/PAT (generating a #GP
otherwise).

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05 13:58:16 +03:00
Jan Kiszka e125e7b694 KVM: Fix KVM_GET_MSR_INDEX_LIST
So far, KVM copied the emulated_msrs (only MSR_IA32_MISC_ENABLE) to a
wrong address in user space due to broken pointer arithmetic. This
caused subtle corruption up there (missing MSR_IA32_MISC_ENABLE had
probably no practical relevance). Moreover, the size check for the
user-provided kvm_msr_list forgot about emulated MSRs.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-08-05 13:58:03 +03:00
Amit Shah 9e6996240a KVM: Ignore reads to K7 EVNTSEL MSRs
In commit 7fe29e0faa we ignored the
reads to the P6 EVNTSEL MSRs. That fixed crashes on Intel machines.

Ignore the reads to K7 EVNTSEL MSRs as well to fix this on AMD
hosts.

This fixes Kaspersky antivirus crashing Windows guests on AMD hosts.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-28 14:10:31 +03:00
Gleb Natapov 8db3baa2db KVM: Disable CR8 intercept if tpr patching is active
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:59 +03:00
Gleb Natapov 36752c9b91 KVM: Do not migrate pending software interrupts.
INTn will be re-executed after migration. If we wanted to migrate
pending software interrupt we would need to migrate interrupt type
and instruction length too, but we do not have all required info on
SVM, so SVM->VMX migration would need to re-execute INTn anyway. To
make it simple never migrate pending soft interrupt.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:59 +03:00
Gleb Natapov 6a8b1d1312 KVM: Always request IRQ/NMI window if an interrupt is pending
Currently they are not requested if there is pending exception.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:58 +03:00
Gleb Natapov 66fd3f7f90 KVM: Do not re-execute INTn instruction.
Re-inject event instead. This is what Intel suggest. Also use correct
instruction length when re-injecting soft fault/interrupt.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:58 +03:00
Gleb Natapov 923c61bbc6 KVM: Remove irq_pending bitmap
Only one interrupt vector can be injected from userspace irqchip at
any given time so no need to store it in a bitmap. Put it into interrupt
queue directly.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:57 +03:00
Gleb Natapov fa9726b073 KVM: Do not allow interrupt injection from userspace if there is a pending event.
The exception will immediately close the interrupt window.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:57 +03:00
Marcelo Tosatti 8986ecc0ef KVM: x86: check for cr3 validity in mmu_alloc_roots
Verify the cr3 address stored in vcpu->arch.cr3 points to an existant
memslot. If not, inject a triple fault.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:55 +03:00
Marcelo Tosatti 7c8a83b75a KVM: MMU: protect kvm_mmu_change_mmu_pages with mmu_lock
kvm_handle_hva, called by MMU notifiers, manipulates mmu data only with
the protection of mmu_lock.

Update kvm_mmu_change_mmu_pages callers to take mmu_lock, thus protecting
against kvm_handle_hva.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Glauber Costa 310b5d306c KVM: Deal with interrupt shadow state for emulated instructions
We currently unblock shadow interrupt state when we skip an instruction,
but failing to do so when we actually emulate one. This blocks interrupts
in key instruction blocks, in particular sti; hlt; sequences

If the instruction emulated is an sti, we have to block shadow interrupts.
The same goes for mov ss. pop ss also needs it, but we don't currently
emulate it.

Without this patch, I cannot boot gpxe option roms at vmx machines.
This is described at https://bugzilla.redhat.com/show_bug.cgi?id=494469

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Glauber Costa 2809f5d2c4 KVM: Replace ->drop_interrupt_shadow() by ->set_interrupt_shadow()
This patch replaces drop_interrupt_shadow with the more
general set_interrupt_shadow, that can either drop or raise
it, depending on its parameter.  It also adds ->get_interrupt_shadow()
for future use.

Signed-off-by: Glauber Costa <glommer@redhat.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:54 +03:00
Marcelo Tosatti 32f8840064 KVM: use smp_send_reschedule in kvm_vcpu_kick
KVM uses a function call IPI to cause the exit of a guest running on a
physical cpu. For virtual interrupt notification there is no need to
wait on IPI receival, or to execute any function.

This is exactly what the reschedule IPI does, without the overhead
of function IPI. So use it instead of smp_call_function_single in
kvm_vcpu_kick.

Also change the "guest_mode" variable to a bit in vcpu->requests, and
use that to collapse multiple IPI's that would be issued between the
first one and zeroing of guest mode.

This allows kvm_vcpu_kick to called with interrupts disabled.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Avi Kivity d149c731e4 KVM: Update cpuid 1.ecx reporting
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:53 +03:00
Avi Kivity 7faa4ee1c7 KVM: Add AMD cpuid bit: cr8_legacy, abm, misaligned sse, sse4, 3dnow prefetch
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:52 +03:00
Avi Kivity 8d753f369b KVM: Fix cpuid feature misreporting
MTRR, PAT, MCE, and MCA are all supported (to some extent) but not reported.
Vista requires these features, so if userspace relies on kernel cpuid
reporting, it loses support for Vista.

Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:52 +03:00
Jan Kiszka d6a8c875f3 KVM: Drop request_nmi from stats
The stats entry request_nmi is no longer used as the related user space
interface was dropped. So clean it up.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:51 +03:00
Sheng Yang 4b12f0de33 KVM: Replace get_mt_mask_shift with get_mt_mask
Shadow_mt_mask is out of date, now it have only been used as a flag to indicate
if TDP enabled. Get rid of it and use tdp_enabled instead.

Also put memory type logical in kvm_x86_ops->get_mt_mask().

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:49 +03:00
Jan Blunck 9b62e5b10f KVM: Wake up waitqueue before calling get_cpu()
This moves the get_cpu() call down to be called after we wake up the
waiters. Therefore the waitqueue locks can safely be rt mutex.

Signed-off-by: Jan Blunck <jblunck@suse.de>
Signed-off-by: Sven-Thorsten Dietrich <sven@thebigcorporation.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
2009-06-10 11:48:49 +03:00