When doing delayed allocation, if the allocation size is for a
maximally sized extent, extent size alignment can push it over this
limit. This results in an assert failure in xfs_bmbt_set_allf() as
the extent length is too large to find in the extent record.
Fix this by ensuring that we allow for space that extent size
alignment requires (up to 2 * (extsize -1) blocks as we have to
handle both head and tail alignment) when limiting the maximum size
of the extent.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
Delayed allocation extents can be larger than AGs, so when trying to
convert a large range we may scan every AG inside
xfs_bmap_alloc_nullfb() trying to find an AG with a size larger than
an AG. We should stop when we find the first AG with a maximum
possible allocation size. This causes excessive CPU usage when there
are lots of AGs.
The same problem occurs when doing preallocation of a range larger
than an AG.
Fix the problem by limiting real allocation lengths to the maximum
that an AG can support. This means if we have empty AGs, we'll stop
the search at the first of them. If there are no empty AGs, we'll
still scan them all, but that is a different problem....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alex Elder <aelder@sgi.com>
There is an assumption in the parts of XFS that flushing a dirty
file will make all the delayed allocation blocks disappear from an
inode. That is, that after calling xfs_flush_pages() then
ip->i_delayed_blks will be zero.
This is an invalid assumption as we may have specualtive
preallocation beyond EOF and they are recorded in
ip->i_delayed_blks. A flush of the dirty pages of an inode will not
change the state of these blocks beyond EOF, so a non-zero
deeelalloc block count after a flush is valid.
The bmap code has an invalid ASSERT() that needs to be removed, and
the swapext code has a bug in that while it swaps the data forks
around, it fails to swap the i_delayed_blks counter associated with
the fork and hence can get the block accounting wrong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Since the move to the new truncate sequence we call xfs_setattr to
truncate down excessively instanciated blocks. As shown by the testcase
in kernel.org BZ #22452 that doesn't work too well. Due to the confusion
of the internal inode size, and the VFS inode i_size it zeroes data that
it shouldn't.
But full blown truncate seems like overkill here. We only instanciate
delayed allocations in the write path, and given that we never released
the iolock we can't have converted them to real allocations yet either.
The only nasty case is pre-existing preallocation which we need to skip.
We already do this for page discard during writeback, so make the delayed
allocation block punching a generic function and call it from the failed
write path as well as xfs_aops_discard_page. The callers are
responsible for ensuring that partial blocks are not truncated away,
and that they hold the ilock.
Based on a fix originally from Christoph Hellwig. This version used
filesystem blocks as the range unit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Export xfs_icsb_modify_counters and always use it for modifying
the per-cpu counters. Remove support for per-cpu counters from
xfs_mod_incore_sb to simplify it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
XFS_IOC_ZERO_RANGE is the equivalent of an atomic XFS_IOC_UNRESVSP/
XFS_IOC_RESVSP call pair. It enabled ranges of written data to be
turned into zeroes without requiring IO or having to free and
reallocate the extents in the range given as would occur if we had
to punch and then preallocate them separately. This enables
applications to zero parts of files very quickly without changing
the layout of the files in any way.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In xfs_vn_fiemap, we set bvm_count to fi_extent_max + 1 and want
to return fi_extent_max extents, but actually it won't work for
a sparse file. The reason is that in xfs_getbmap we will
calculate holes and set it in 'out', while out is malloced by
bmv_count(fi_extent_max+1) which didn't consider holes. So in the
worst case, if 'out' vector looks like
[hole, extent, hole, extent, hole, ... hole, extent, hole],
we will only return half of fi_extent_max extents.
This patch add a new parameter BMV_IF_NO_HOLES for bvm_iflags.
So with this flags, we don't use our 'out' in xfs_getbmap for
a hole. The solution is a bit ugly by just don't increasing
index of 'out' vector. I felt that it is not easy to skip it
at the very beginning since we have the complicated check and
some function like xfs_getbmapx_fix_eof_hole to adjust 'out'.
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
This code was introduced four years ago in commit
3e57ecf640 without any review and has
been unused since. Remove it just as the rest of the code introduced
in that commit to reduce that stack usage and complexity in this central
piece of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently we need to either call IHOLD or xfs_trans_ihold on an inode when
joining it to a transaction via xfs_trans_ijoin.
This patches instead makes xfs_trans_ijoin usable on it's own by doing
an implicity xfs_trans_ihold, which also allows us to drop the third
argument. For the case where we want to hold a reference on the inode
a xfs_trans_ijoin_ref wrapper is added which does the IHOLD and marks
the inode for needing an xfs_iput. In addition to the cleaner interface
to the caller this also simplifies the implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Currently we track log item descriptor belonging to a transaction using a
complex opencoded chunk allocator. This code has been there since day one
and seems to work around the lack of an efficient slab allocator.
This patch replaces it with dynamically allocated log item descriptors
from a dedicated slab pool, linked to the transaction by a linked list.
This allows to greatly simplify the log item descriptor tracking to the
point where it's just a couple hundred lines in xfs_trans.c instead of
a separate file. The external API has also been simplified while we're
at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/
delete items from a transaction have been simplified to the bare minium,
and the xfs_trans_find_item function is replaced with a direct dereference
of the li_desc field. All debug code walking the list of log items in
a transaction is down to a simple list_for_each_entry.
Note that we could easily use a singly linked list here instead of the
double linked list from list.h as the fastpath only does deletion from
sequential traversal. But given that we don't have one available as
a library function yet I use the list.h functions for simplicity.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dmapi support was never merged upstream, but we still have a lot of hooks
bloating XFS for it, all over the fast pathes of the filesystem.
This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM
support in mainline at least the namespace events can be done much saner
in the VFS instead of the individual filesystem, so it's not like this
is much help for future work.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
xfs_bmap_add_attrfork() passes XFS_TRANS_PERM_LOG_RES to xfs_trans_commit()
to indicate that the commit should release the permanent log reservation
as part of the commit. This is wrong - the correct flag is
XFS_TRANS_RELEASE_LOG_RES - and it is only by the chance that both these
flags have the value of 0x4 that the code is doing the right thing.
Fix it by changing to use the correct flag.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Split out the nullfb case into a separate function to reduce the stack
footprint and make the code more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
Initialise the xfs_bmalloca_t structure to zero to avoid uninitialised
variable warnings. This is done by zeroing the arg structure rather than
using the uninitialised_var() trick so we know for certain that the
structure is correctly initialised as xfs_bmapi is a very complex
function and it is difficult to prove warnings are spurious.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The use of an array for the per-ag structures requires reallocation
of the array when growing the filesystem. This requires locking
access to the array to avoid use after free situations, and the
locking is difficult to get right. To avoid needing to reallocate an
array, change the per-ag structures to an allocated object per ag
and index them using a tree structure.
The AGs are always densely indexed (hence the use of an array), but
the number supported is 2^32 and lookups tend to be random and hence
indexing needs to scale. A simple choice is a radix tree - it works
well with this sort of index. This change also removes another
large contiguous allocation from the mount/growfs path in XFS.
The growing process now needs to change to only initialise the new
AGs required for the extra space, and as such only needs to
exclusively lock the tree for inserts. The rest of the code only
needs to lock the tree while doing lookups, and hence this will
remove all the deadlocks that currently occur on the m_perag_lock as
it is now an innermost lock. The lock is also changed to a spinlock
from a read/write lock as the hold time is now extremely short.
To complete the picture, the per-ag structures will need to be
reference counted to ensure that we don't free/modify them while
they are still in use. This will be done in subsequent patch.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert the remaining direct lookups of the per ag structures to use
get/put accesses. Ensure that the loops across AGs and prior users
of the interface balance gets and puts correctly.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Convert the old xfs tracing support that could only be used with the
out of tree kdb and xfsidbg patches to use the generic event tracer.
To use it make sure CONFIG_EVENT_TRACING is enabled and then enable
all xfs trace channels by:
echo 1 > /sys/kernel/debug/tracing/events/xfs/enable
or alternatively enable single events by just doing the same in one
event subdirectory, e.g.
echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable
or set more complex filters, etc. In Documentation/trace/events.txt
all this is desctribed in more detail. To reads the events do a
cat /sys/kernel/debug/tracing/trace
Compared to the last posting this patch converts the tracing mostly to
the one tracepoint per callsite model that other users of the new
tracing facility also employ. This allows a very fine-grained control
of the tracing, a cleaner output of the traces and also enables the
perf tool to use each tracepoint as a virtual performance counter,
allowing us to e.g. count how often certain workloads git various
spots in XFS. Take a look at
http://lwn.net/Articles/346470/
for some examples.
Also the btree tracing isn't included at all yet, as it will require
additional core tracing features not in mainline yet, I plan to
deliver it later.
And the really nice thing about this patch is that it actually removes
many lines of code while adding this nice functionality:
fs/xfs/Makefile | 8
fs/xfs/linux-2.6/xfs_acl.c | 1
fs/xfs/linux-2.6/xfs_aops.c | 52 -
fs/xfs/linux-2.6/xfs_aops.h | 2
fs/xfs/linux-2.6/xfs_buf.c | 117 +--
fs/xfs/linux-2.6/xfs_buf.h | 33
fs/xfs/linux-2.6/xfs_fs_subr.c | 3
fs/xfs/linux-2.6/xfs_ioctl.c | 1
fs/xfs/linux-2.6/xfs_ioctl32.c | 1
fs/xfs/linux-2.6/xfs_iops.c | 1
fs/xfs/linux-2.6/xfs_linux.h | 1
fs/xfs/linux-2.6/xfs_lrw.c | 87 --
fs/xfs/linux-2.6/xfs_lrw.h | 45 -
fs/xfs/linux-2.6/xfs_super.c | 104 ---
fs/xfs/linux-2.6/xfs_super.h | 7
fs/xfs/linux-2.6/xfs_sync.c | 1
fs/xfs/linux-2.6/xfs_trace.c | 75 ++
fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++
fs/xfs/linux-2.6/xfs_vnode.h | 4
fs/xfs/quota/xfs_dquot.c | 110 ---
fs/xfs/quota/xfs_dquot.h | 21
fs/xfs/quota/xfs_qm.c | 40 -
fs/xfs/quota/xfs_qm_syscalls.c | 4
fs/xfs/support/ktrace.c | 323 ---------
fs/xfs/support/ktrace.h | 85 --
fs/xfs/xfs.h | 16
fs/xfs/xfs_ag.h | 14
fs/xfs/xfs_alloc.c | 230 +-----
fs/xfs/xfs_alloc.h | 27
fs/xfs/xfs_alloc_btree.c | 1
fs/xfs/xfs_attr.c | 107 ---
fs/xfs/xfs_attr.h | 10
fs/xfs/xfs_attr_leaf.c | 14
fs/xfs/xfs_attr_sf.h | 40 -
fs/xfs/xfs_bmap.c | 507 +++------------
fs/xfs/xfs_bmap.h | 49 -
fs/xfs/xfs_bmap_btree.c | 6
fs/xfs/xfs_btree.c | 5
fs/xfs/xfs_btree_trace.h | 17
fs/xfs/xfs_buf_item.c | 87 --
fs/xfs/xfs_buf_item.h | 20
fs/xfs/xfs_da_btree.c | 3
fs/xfs/xfs_da_btree.h | 7
fs/xfs/xfs_dfrag.c | 2
fs/xfs/xfs_dir2.c | 8
fs/xfs/xfs_dir2_block.c | 20
fs/xfs/xfs_dir2_leaf.c | 21
fs/xfs/xfs_dir2_node.c | 27
fs/xfs/xfs_dir2_sf.c | 26
fs/xfs/xfs_dir2_trace.c | 216 ------
fs/xfs/xfs_dir2_trace.h | 72 --
fs/xfs/xfs_filestream.c | 8
fs/xfs/xfs_fsops.c | 2
fs/xfs/xfs_iget.c | 111 ---
fs/xfs/xfs_inode.c | 67 --
fs/xfs/xfs_inode.h | 76 --
fs/xfs/xfs_inode_item.c | 5
fs/xfs/xfs_iomap.c | 85 --
fs/xfs/xfs_iomap.h | 8
fs/xfs/xfs_log.c | 181 +----
fs/xfs/xfs_log_priv.h | 20
fs/xfs/xfs_log_recover.c | 1
fs/xfs/xfs_mount.c | 2
fs/xfs/xfs_quota.h | 8
fs/xfs/xfs_rename.c | 1
fs/xfs/xfs_rtalloc.c | 1
fs/xfs/xfs_rw.c | 3
fs/xfs/xfs_trans.h | 47 +
fs/xfs/xfs_trans_buf.c | 62 -
fs/xfs/xfs_vnodeops.c | 8
70 files changed, 2151 insertions(+), 2592 deletions(-)
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Change the xfs_iext_insert / xfs_iext_remove prototypes to pass more
information which will allow pushing the trace points from the callers
into those functions. This includes folding the whichfork information
into the state variable to minimize the addition stack footprint.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
Cleanup the extent state macros in the bmap code to use one common set of
flags that we can pass to the tracing code later and remove a lot of the
macro obsfucation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Elder <aelder@sgi.com>
A lot more functions could be made static, but they need
forward declarations; this does some easy ones, and also
found a few unused functions in the process.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
xfs_getbmap allocates memory with i_lock held, but i_lock is taken in
reclaim context so all allocations under it must avoid recursions into
the filesystem.
Reported by the new reclaim context tracing in lockdep.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Regression from commit 28e211700a.
Need to free temporary buffer allocated in xfs_getbmap().
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Hedi Berriche <hedi@sgi.com>
Reported-by: Justin Piszcz <jpiszcz@lucidpixels.com>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Kill the quota ops function vector and replace it with direct calls or
stubs in the CONFIG_XFS_QUOTA=n case.
Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove
the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set
otherwise.
This brings us back closer to the way this code worked in IRIX and earlier
Linux versions, but we keep a lot of the more useful factoring of common
code.
Eventually we should also kill xfs_qm_bhv.c, but that's left for a later
patch.
Reduces the size of the source code by about 250 lines and the size of
XFS module by about 1.5 kilobytes with quotas enabled:
text data bss dec hex filename
615957 2960 3848 622765 980ad fs/xfs/xfs.o
617231 3152 3848 624231 98667 fs/xfs/xfs.o.old
Fallout:
- xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects
the inode locked and xfs_qm_dqattach which does the locking around it,
thus removing XFS_QMOPT_ILOCKED.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
xfs_getbmap (or rather the formatters called by it) copy out the getbmap
structures under the ilock, which can deadlock against mmap. This has
been reported via bugzilla a while ago (#717) and has recently also
shown up via lockdep.
So allocate a temporary buffer to format the kernel getbmap structures
into and then copy them out after dropping the locks.
A little problem with this is that we limit the number of extents we
can copy out by the maximum allocation size, but I see no real way
around that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
- reshuffle various conditionals for data vs attr fork to make the code
more readable
- do fine-grainded goto-based error handling
- exit early from conditionals instead of keeping a long else branch around
- allow kmem_alloc to fail
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Felix Blyakher <felixb@sgi.com>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
With the upcoming v3 inodes the default attroffset needs to be calculated
for each specific inode, so we can't cache it in the superblock anymore.
Also replace the assert for wrong inode sizes with a proper error check
also included in non-debug builds. Note that the ENOSYS return for
that might seem odd, but that error is returned by xfs_mount_validate_sb
for all theoretically valid but not supported filesystem geometries.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Instead of the keyword 'static' the macro 'STATIC' is used, so the
symbols are still global with CONFIG_XFS_DEBUG.
Fix this sparse warnings:
fs/xfs/linux-2.6/xfs_super.c:638:1: warning: symbol 'xfs_blkdev_get' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:655:1: warning: symbol 'xfs_blkdev_put' was not declared. Should it be static?
fs/xfs/linux-2.6/xfs_super.c:876:1: warning: symbol 'xfsaild' was not declared. Should it be static?
fs/xfs/xfs_bmap.c:6208:1: warning: symbol 'xfs_check_block' was not declared. Should it be static?
fs/xfs/xfs_dir2_leaf.c:553:1: warning: symbol 'xfs_dir2_leaf_check' was not declared. Should it be static?
Signed-off-by: Hannes Eder <hannes@hanneseder.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felix Blyakher <felixb@sgi.com>
Remove the last of the macros-defined-to-static-functions.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
This adds a new output flag, BMV_OF_LAST to indicate if we've hit
the last extent in the inode. This potentially saves an extra call
from userspace to see when the whole mapping is done.
It also adds BMV_IF_DELALLOC and BMV_OF_DELALLOC to request, and
indicate, delayed-allocation extents. In this case bmv_block
is set to -2 (-1 was already taken for HOLESTARTBLOCK; unfortunately
these are the reverse of the in-kernel constants.)
These new flags facilitate addition of the new fiemap interface.
Rather than adding sh_delalloc, remove sh_unwritten & just test
the flags directly.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
Preliminary work to hook up fiemap, this allows us to pass in an
arbitrary formatter to copy extent data back to userspace.
The formatter takes info for 1 extent, a pointer to the user "thing*"
and a pointer to a "filled" variable to indicate whether a userspace
buffer did get filled in (for fiemap, hole "extents" are skipped).
I'm just using the getbmapx struct as a "common denominator" because
as far as I can see, it holds all info that any formatters will care
about.
("*thing" because fiemap doesn't pass the user pointer around, but rather
has a pointer to a fiemap info structure, and helpers associated with it)
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Niv Sardi <xaiki@sgi.com>
When an I/O error occurs during an intermediate commit on a rolling
transaction, xfs_trans_commit() will free the transaction structure
and the related ticket. However, the duplicate transaction that
gets used as the transaction continues still contains a pointer
to the ticket. Hence when the duplicate transaction is cancelled
and freed, we free the ticket a second time.
Add reference counting to the ticket so that we hold an extra
reference to the ticket over the transaction commit. We drop the
extra reference once we have checked that the transaction commit
did not return an error, thus avoiding a double free on commit
error.
Credit to Nick Piggin for tripping over the problem.
SGI-PV: 989741
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Move the XFS_BMAP_SANITY_CHECK macro out of line and make it a properly
typed function. Also pass the xfs_buf for the btree block instead of just
the btree block header, as we will need some additional information for it
to implement CRC checking of btree blocks.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32301a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
structures.
Always use the generic xfs_btree_block type instead of the short / long
structures. Add XFS_BTREE_SBLOCK_LEN / XFS_BTREE_LBLOCK_LEN defines for
the length of a short / long form block. The rationale for this is that we
will grow more btree block header variants to support CRCs and other RAS
information, and always accessing them through the same datatype with
unions for the short / long form pointers makes implementing this much
easier.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32300a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Replace the generic record / key / ptr addressing macros that use cpp
token pasting with simpler macros that do the job for just one given btree
type. The new macros lose the cur argument and thus can be used outside
the core btree code, but also gain an xfs_mount * argument to allow for
checking the CRC flag in the near future. Note that many of these macros
aren't actually used in the kernel code, but only in userspace (mostly in
xfs_repair).
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32295a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Clean up the way the maximum and minimum records for the btree blocks are
calculated. For the alloc and inobt btrees all the values are
pre-calculated in xfs_mount_common, and we switch the current loop around
the ugly generic macros that use cpp token pasting to generate type names
to two small helpers in normal C code. For the bmbt and bmdr trees these
helpers also exist, but can be called during runtime, too. Here we also
kill various macros dealing with them and inline the logic into the
get_minrecs / get_maxrecs / get_dmaxrecs methods in xfs_bmap_btree.c.
Note that all these new helpers take an xfs_mount * argument which will be
needed to determine the size of a btree block once we add support for
extended btree blocks with CRCs and other RAS information.
SGI-PV: 988146
SGI-Modid: xfs-linux-melb:xfs-kern:32292a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Add methods to check whether two keys/records are in the righ order. This
replaces the xfs_btree_check_key and xfs_btree_check_rec methods. For the
callers from xfs_bmap.c just opencode the bmbt-specific asserts.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32208a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
These are equivalent to the xfs_btree_* versions, and the only remaining
caller can be switched to the generic one after they are exported. Also
remove some now dead infrastructure in xfs_bmap_btree.c.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32207a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree delete code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32205a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Make the btree insert code generic. Based on a patch from David Chinner
with lots of changes to follow the original btree implementations more
closely. While this loses some of the generic helper routines for
inserting/moving/removing records it also solves some of the one off bugs
in the original code and makes it easier to verify.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32202a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_bmbt_newroot is a mostly generic implementation of moving from an
inode root to a real block based root. So move it to xfs_btree.c where it
can use all the nice infrastructure there and make it pointer size
agnostic
The new name for it is xfs_btree_new_iroot, following the old naming but
making it clear we're dealing with the root in inode case here, and to
avoid confusion with xfs_btree_new_root which is used for the not inode
rooted case.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32201a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
The most complicated part here is the lastrec tracking for the alloc
btree. Most logic is in the update_lastrec method which has to do some
hopefully good enough dirty magic to maintain it.
[hch: split out from bigger patch and a rework of the lastrec
logic]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32194a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32192a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32191a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
From: Dave Chinner <dgc@sgi.com>
Because this is the first major generic btree routine this patch includes
some infrastrucure, first a few routines to deal with a btree block that
can be either in short or long form, second xfs_btree_read_buf_block,
which is the new central routine to read a btree block given a cursor, and
third the new xfs_btree_ptr_addr routine to calculate the address for a
given btree pointer record.
[hch: split out from bigger patch and minor adaptions]
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32190a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
xfs_btree_init_cursor contains close to little shared code for the
different btrees and will get even more non-common code in the future.
Split it up into one routine per btree type.
Because xfs_btree_dup_cursor needs to call the init routine for a generic
btree cursor add a new btree operation vector that contains a dup_cursor
method that initializes a new cursor based on an existing one.
The btree operations vector is based on an idea and code from Dave Chinner
and will grow more entries later during this series.
SGI-PV: 985583
SGI-Modid: xfs-linux-melb:xfs-kern:32176a
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
Signed-off-by: Bill O'Donnell <billodo@sgi.com>
Signed-off-by: David Chinner <david@fromorbit.com>
Dave Chinner