dect
/
linux-2.6
Archived
13
0
Fork 0
Commit Graph

120 Commits

Author SHA1 Message Date
Antonio Quartulli 980d55b20a batman-adv: keep global table consistency in case of roaming
To keep consistency of other originator tables, new clients detected as
roamed, are kept in the global table but are marked as TT_CLIENT_PENDING
They are purged only when the new ttvn is received by the corresponding
originator. Moreover they need to be considered as removed in case of global
transtable lookup.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07 18:49:26 +02:00
Antonio Quartulli 058d0e2698 batman-adv: keep local table consistency for further TT_RESPONSE
To keep transtable consistency among all the nodes, an originator must
not send not yet announced clients within a full table TT_RESPONSE.
Instead, deleted client have to be kept in the table in order to be sent
within an immediate TT_RESPONSE. In this way all the nodes in the
network will always provide the same response for the same request.

All the modification are committed at the next ttvn increment event.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07 18:49:26 +02:00
Antonio Quartulli ff66c975d5 batman-adv: pass a unique flag arg instead of a sequence of bool ones
now tt_local_event() takes a flags argument instead of a sequence of
boolean values which would grow up with the time.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05 14:28:54 +02:00
Antonio Quartulli 5fbc1598c2 batman-adv: unify flags for tt_change/tt_local_entry/tt_global_entry
The tt_local_entry structure now has a 'flags' field. This helps to
unify the flags format to all the client related structures (tt_global_entry
and tt_change). The 'never_purge' field is now encoded in the 'flags' one.
To optimise the usage of this field, its length has been increased to 16bit
in order to use the eight leading bits (from 0 to 7) to store flags that
have to be sent on the wire, while the eight ending ones are used for local
computation only.

Moreover 'enum tt_change_flags' is now called 'enum tt_client_flags' and the
defined values apply to the tt_local_entry, tt_global_entry and the tt_change
'flags' field.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05 14:28:54 +02:00
Antonio Quartulli 7683fdc1e8 batman-adv: protect the local and the global trans-tables with rcu
The local and the global translation-tables are now lock free and rcu
protected.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:30 +02:00
Antonio Quartulli cc47f66e6b batman-adv: improved roaming mechanism
With the current client announcement implementation, in case of roaming,
an update is triggered on the new AP serving the client. At that point
the new information is spread around by means of the OGM broadcasting
mechanism. Until this operations is not executed, no node is able to
correctly route traffic towards the client. This obviously causes packet
drops and introduces a delay in the time needed by the client to recover
its connections.

A new packet type called ROAMING_ADVERTISEMENT is added to account this
issue.

This message is sent in case of roaming from the new AP serving the
client to the old one and will contain the client MAC address. In this
way an out-of-OGM update is immediately committed, so that the old node
can update its global translation table. Traffic reaching this node will
then be redirected to the correct destination utilising the fresher
information. Thus reducing the packet drops and the connection recovery
delay.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:27 +02:00
Antonio Quartulli a73105b8d4 batman-adv: improved client announcement mechanism
The client announcement mechanism informs every mesh node in the network
of any connected non-mesh client, in order to find the path towards that
client from any given point in the mesh.

The old implementation was based on the simple idea of appending a data
buffer to each OGM containing all the client MAC addresses the node is
serving. All other nodes can populate their global translation tables
(table which links client MAC addresses to node addresses) using this
MAC address buffer and linking it to the node's address contained in the
OGM. A node that wants to contact a client has to lookup the node the
client is connected to and its address in the global translation table.

It is easy to understand that this implementation suffers from several
issues:
 - big overhead (each and every OGM contains the entire list of
   connected clients)
 - high latencies for client route updates due to long OGM trip time and
   OGM losses

The new implementation addresses these issues by appending client
changes (new client joined or a client left) to the OGM instead of
filling it with all the client addresses each time. In this way nodes
can modify their global tables by means of "updates", thus reducing the
overhead within the OGMs.

To keep the entire network in sync each node maintains a translation
table version number (ttvn) and a translation table checksum. These
values are spread with the OGM to allow all the network participants to
determine whether or not they need to update their translation table
information.

When a translation table lookup is performed in order to send a packet
to a client attached to another node, the destination's ttvn is added to
the payload packet. Forwarding nodes can compare the packet's ttvn with
their destination's ttvn (this node could have a fresher information
than the source) and re-route the packet if necessary. This greatly
reduces the packet loss of clients roaming from one AP to the next.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:24 +02:00
Sven Eckelmann 704509b8d4 batman-adv: Calculate sizeof using variable insead of types
Documentation/CodingStyle recommends to use the form

	p = kmalloc(sizeof(*p), ...);

to calculate the size of a struct and not the version where the struct
name is spelled out to prevent bugs when the type of p changes. This
also seems appropriate for manipulation of buffers when they are
directly associated with p.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30 07:39:33 +02:00
Sven Eckelmann 5f718c2007 batman-adv: Remove explicit casts cast from void* for store
It is not necessary to cast a void* to the pointer type when we just
store it and don't want to do pointer arithmetic before the actual
assignment.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30 07:39:32 +02:00
Sven Eckelmann 747e4221a0 batman-adv: Add const type qualifier for pointers
batman-adv uses pointers which are marked as const and should not
violate that type qualifier by passing it to functions which force a
cast to the non-const version.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30 07:39:31 +02:00
Antonio Quartulli 2dafb49d84 batman-adv: rename everything from *hna* into *tt* (translation table)
To be coherent, all the functions/variables/constants have been renamed
to the TranslationTable style

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Marek Lindner 32ae9b221e batman-adv: Make bat_priv->primary_if an rcu protected pointer
The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the bat_priv->primary_if need to be used, as well as spin/rcu locking.

Otherwise we might end up using a primary_if pointer pointing to already
freed memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01 22:49:03 +02:00
Marek Lindner 7b36e8eef9 batman-adv: Correct rcu refcounting for orig_node
It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:52:01 +01:00
Marek Lindner 7aadf889e8 batman-adv: remove extra layer between hash and hash element - hash bucket
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:52:00 +01:00
Marek Lindner 39901e7162 batman-adv: separate ethernet comparing calls from hash functions
Note: The function compare_ether_addr() provided by the Linux kernel
requires aligned memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:50:14 +01:00
Marek Lindner fb778ea173 batman-adv: protect each hash row with rcu locks
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:49:58 +01:00
Linus Lüssing ee1e884194 batman-adv: Remove duplicate types.h inclusions
types.h is included by main.h, which is included at the beginning of any
other c-file anyway. Therefore this commit removes those duplicate
inclussions.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11 23:30:29 +01:00
Sven Eckelmann 64afe35398 batman-adv: Update copyright years
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31 14:57:12 +01:00
Sven Eckelmann 53320fe3bb batman-adv: Return hna count on local buffer fill
hna_local_fill_buffer must return the number of added hna entries and
not the last checked hash bucket.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-20 10:32:03 -08:00
Sven Eckelmann c6c8fea297 net: Add batman-adv meshing protocol
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing
protocol for multi-hop ad-hoc mesh networks. The networks may be wired or
wireless. See http://www.open-mesh.org/ for more information and user space
tools.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:44:24 -08:00