[ARM] Move asm/hardware/clock.h to linux/clk.h

This is needs to be visible to other architectures using the AMBA
bus and peripherals.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-aaec2000/clock.c

@@ -15,9 +15,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 
 #include "clock.h"
 

arch/arm/mach-integrator/clock.c

@@ -14,9 +14,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst525.h>
 
 #include "clock.h"

arch/arm/mach-omap1/board-palmte.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/notifier.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
@@ -30,7 +31,6 @@
 #include <asm/arch/usb.h>
 #include <asm/arch/board.h>
 #include <asm/arch/common.h>
-#include <asm/hardware/clock.h>
 
 static void __init omap_generic_init_irq(void)
 {

arch/arm/mach-omap1/clock.c

@@ -16,9 +16,9 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/usb.h>
 #include <asm/arch/clock.h>

arch/arm/mach-omap1/serial.c

@@ -17,10 +17,10 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>

arch/arm/mach-omap2/clock.c

@@ -22,10 +22,10 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/sram.h>
 #include <asm/arch/prcm.h>

arch/arm/mach-omap2/serial.c

@@ -16,9 +16,9 @@
 #include <linux/init.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/common.h>
 #include <asm/arch/board.h>

arch/arm/mach-omap2/timer-gp.c

@@ -21,10 +21,11 @@
 #include <linux/time.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
+
 #include <asm/mach/time.h>
 #include <asm/delay.h>
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #define OMAP2_GP_TIMER1_BASE	0x48028000
 #define OMAP2_GP_TIMER2_BASE	0x4802a000

arch/arm/mach-realview/clock.c

@@ -13,9 +13,9 @@
 #include <linux/list.h>
 #include <linux/errno.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"

arch/arm/mach-s3c2410/clock.c

@@ -34,16 +34,15 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
-
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-clock.h>
 
 #include "clock.h"

arch/arm/mach-s3c2410/s3c2440-clock.c

@@ -29,16 +29,15 @@
 #include <linux/err.h>
 #include <linux/device.h>
 #include <linux/sysdev.h>
-
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-clock.h>
 
 #include "clock.h"

arch/arm/mach-s3c2410/s3c2440.c

@@ -28,6 +28,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
+#include <linux/clk.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -36,7 +37,6 @@
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>

arch/arm/mach-s3c2410/time.c

@@ -24,6 +24,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/system.h>
 #include <asm/leds.h>
@@ -35,7 +36,6 @@
 #include <asm/arch/regs-timer.h>
 #include <asm/arch/regs-irq.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/clock.h>
 
 #include "clock.h"
 #include "cpu.h"

arch/arm/mach-versatile/clock.c

@@ -14,9 +14,9 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware/icst307.h>
 
 #include "clock.h"

arch/arm/plat-omap/clock.c

@@ -19,10 +19,10 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/string.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/semaphore.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/clock.h>
 

arch/arm/plat-omap/common.c

@@ -18,12 +18,12 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/clock.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 

arch/arm/plat-omap/cpu-omap.c

@@ -19,13 +19,12 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
-#include <asm/hardware/clock.h>
-
 /* TODO: Add support for SDRAM timing changes */
 
 int omap_verify_speed(struct cpufreq_policy *policy)

arch/arm/plat-omap/gpio.c

@@ -19,9 +19,9 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>

arch/arm/plat-omap/mcbsp.c

@@ -19,6 +19,7 @@
 #include <linux/completion.h>
 #include <linux/interrupt.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/delay.h>
 #include <asm/io.h>
@@ -30,8 +31,6 @@
 #include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
-#include <asm/hardware/clock.h>
-
 #ifdef CONFIG_MCBSP_DEBUG
 #define DBG(x...)	printk(x)
 #else

arch/arm/plat-omap/ocpi.c

@@ -31,9 +31,9 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware.h>
 
 #define OCPI_BASE		0xfffec320

drivers/char/s3c2410-rtc.c

@@ -24,6 +24,7 @@
 #include <linux/interrupt.h>
 #include <linux/rtc.h>
 #include <linux/bcd.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/uaccess.h>
@@ -33,7 +34,6 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-rtc.h>
 
 /* need this for the RTC_AF definitions */

drivers/char/watchdog/s3c2410_wdt.c

@@ -46,12 +46,12 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/clk.h>
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
 #include <asm/arch/map.h>
-#include <asm/hardware/clock.h>
 
 #undef S3C24XX_VA_WATCHDOG
 #define S3C24XX_VA_WATCHDOG (0)

drivers/i2c/busses/i2c-s3c2410.c

@@ -34,12 +34,12 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/hardware/clock.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-iic.h>
 #include <asm/arch/iic.h>

drivers/input/serio/ambakmi.c

@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware/clock.h>
 
 #define KMI_BASE	(kmi->base)
 

drivers/mmc/mmci.c

@@ -20,12 +20,12 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/protocol.h>
 #include <linux/amba/bus.h>
+#include <linux/clk.h>
 
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/scatterlist.h>
 #include <asm/sizes.h>
-#include <asm/hardware/clock.h>
 #include <asm/mach/mmc.h>
 
 #include "mmci.h"

drivers/mtd/nand/s3c2410.c

@@ -53,6 +53,7 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/clk.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
@@ -60,7 +61,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/io.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-nand.h>
 #include <asm/arch/nand.h>

drivers/serial/amba-pl011.c

@@ -49,10 +49,10 @@
 #include <linux/serial.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/hardware/clock.h>
 
 #define UART_NR			14
 

drivers/serial/s3c2410.c

@@ -72,12 +72,12 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>

drivers/usb/host/ohci-omap.c

@@ -17,6 +17,7 @@
 #include <linux/signal.h>	/* SA_INTERRUPT */
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
@@ -27,7 +28,6 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/usb.h>
-#include <asm/hardware/clock.h>
 
 
 /* OMAP-1510 OHCI has its own MMU for DMA */

drivers/usb/host/ohci-s3c2410.c

@@ -20,9 +20,9 @@
 */
 
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 #include <asm/arch/usb-control.h>
 
 #define valid_port(idx) ((idx) == 1 || (idx) == 2)

drivers/video/amba-clcd.c

@@ -23,9 +23,9 @@
 #include <linux/list.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
+#include <linux/clk.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware/clock.h>
 
 #define to_clcd(info)	container_of(info, struct clcd_fb, fb)
 

drivers/video/s3c2410fb.c

@@ -87,6 +87,7 @@
 #include <linux/workqueue.h>
 #include <linux/wait.h>
 #include <linux/platform_device.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/uaccess.h>
@@ -96,7 +97,6 @@
 #include <asm/arch/regs-lcd.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/fb.h>
-#include <asm/hardware/clock.h>
 
 #ifdef CONFIG_PM
 #include <linux/pm.h>

include/asm-arm/arch-omap/system.h

@@ -5,8 +5,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 #include <linux/config.h>
+#include <linux/clk.h>
+
 #include <asm/mach-types.h>
-#include <asm/hardware/clock.h>
 #include <asm/hardware.h>
 #include <asm/arch/prcm.h>
 

include/linux/clk.h

@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/hardware/clock.h
+ *  linux/include/linux/clk.h
  *
  *  Copyright (C) 2004 ARM Limited.
  *  Written by Deep Blue Solutions Limited.