ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
Add support for the IB-NAS6210 and IB-NAS 6220. Describe as much as currently possible in the devicetree files, including the NAND partitions. Use the partition scheme of the original firmware by default. Create a board-ib62x0.c for everything else. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Simon Baatz
Jason Cooper
parent
c06cd9bfca
commit
f552036353
|
|
@ -0,0 +1,44 @@
|
|||
/dts-v1/;
|
||||
|
||||
/include/ "kirkwood.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
|
||||
compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x10000000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
||||
};
|
||||
|
||||
ocp@f1000000 {
|
||||
serial@12000 {
|
||||
clock-frequency = <200000000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@3000000 {
|
||||
status = "okay";
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "uImage";
|
||||
reg = <0x0100000 0x600000>;
|
||||
};
|
||||
|
||||
partition@700000 {
|
||||
label = "root";
|
||||
reg = <0x0700000 0xf900000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -72,6 +72,14 @@ config MACH_DLINK_KIRKWOOD_DT
|
|||
Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
|
||||
using Flattened Device Tree.
|
||||
|
||||
config MACH_IB62X0_DT
|
||||
bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
|
||||
select ARCH_KIRKWOOD_DT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
|
||||
Flattened Device Tree.
|
||||
|
||||
config MACH_TS219
|
||||
bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS"
|
||||
help
|
||||
|
|
|
|||
|
|
@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
|
|||
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
|
||||
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
|
||||
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
|
||||
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
|
||||
|
|
|
|||
|
|
@ -6,3 +6,4 @@ dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
|
|||
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
|
||||
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
|
||||
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
|
||||
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
|
||||
|
|
|
|||
|
|
@ -62,6 +62,9 @@ static void __init kirkwood_dt_init(void)
|
|||
if (of_machine_is_compatible("iom,iconnect"))
|
||||
iconnect_init();
|
||||
|
||||
if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
|
||||
ib62x0_init();
|
||||
|
||||
of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
|
||||
}
|
||||
|
||||
|
|
@ -70,6 +73,7 @@ static const char *kirkwood_dt_board_compat[] = {
|
|||
"dlink,dns-320",
|
||||
"dlink,dns-325",
|
||||
"iom,iconnect",
|
||||
"raidsonic,ib-nas62x0",
|
||||
NULL
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,143 @@
|
|||
/*
|
||||
* Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
|
||||
*
|
||||
* arch/arm/mach-kirkwood/board-ib62x0.c
|
||||
*
|
||||
* RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
|
||||
* converted to flattened device tree yet.
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without any
|
||||
* warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/ata_platform.h>
|
||||
#include <linux/mv643xx_eth.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/leds.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
#include <mach/kirkwood.h>
|
||||
#include "common.h"
|
||||
#include "mpp.h"
|
||||
|
||||
#define IB62X0_GPIO_POWER_OFF 24
|
||||
|
||||
static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
|
||||
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
|
||||
};
|
||||
|
||||
static struct mv_sata_platform_data ib62x0_sata_data = {
|
||||
.n_ports = 2,
|
||||
};
|
||||
|
||||
static unsigned int ib62x0_mpp_config[] __initdata = {
|
||||
MPP0_NF_IO2,
|
||||
MPP1_NF_IO3,
|
||||
MPP2_NF_IO4,
|
||||
MPP3_NF_IO5,
|
||||
MPP4_NF_IO6,
|
||||
MPP5_NF_IO7,
|
||||
MPP18_NF_IO0,
|
||||
MPP19_NF_IO1,
|
||||
MPP22_GPIO, /* OS LED red */
|
||||
MPP24_GPIO, /* Power off device */
|
||||
MPP25_GPIO, /* OS LED green */
|
||||
MPP27_GPIO, /* USB transfer LED */
|
||||
MPP28_GPIO, /* Reset button */
|
||||
MPP29_GPIO, /* USB Copy button */
|
||||
0
|
||||
};
|
||||
|
||||
static struct gpio_led ib62x0_led_pins[] = {
|
||||
{
|
||||
.name = "ib62x0:green:os",
|
||||
.default_trigger = "default-on",
|
||||
.gpio = 25,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "ib62x0:red:os",
|
||||
.default_trigger = "none",
|
||||
.gpio = 22,
|
||||
.active_low = 0,
|
||||
},
|
||||
{
|
||||
.name = "ib62x0:red:usb_copy",
|
||||
.default_trigger = "none",
|
||||
.gpio = 27,
|
||||
.active_low = 0,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_led_platform_data ib62x0_led_data = {
|
||||
.leds = ib62x0_led_pins,
|
||||
.num_leds = ARRAY_SIZE(ib62x0_led_pins),
|
||||
};
|
||||
|
||||
static struct platform_device ib62x0_led_device = {
|
||||
.name = "leds-gpio",
|
||||
.id = -1,
|
||||
.dev = {
|
||||
.platform_data = &ib62x0_led_data,
|
||||
}
|
||||
};
|
||||
|
||||
static struct gpio_keys_button ib62x0_button_pins[] = {
|
||||
{
|
||||
.code = KEY_COPY,
|
||||
.gpio = 29,
|
||||
.desc = "USB Copy",
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.code = KEY_RESTART,
|
||||
.gpio = 28,
|
||||
.desc = "Reset",
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_platform_data ib62x0_button_data = {
|
||||
.buttons = ib62x0_button_pins,
|
||||
.nbuttons = ARRAY_SIZE(ib62x0_button_pins),
|
||||
};
|
||||
|
||||
static struct platform_device ib62x0_button_device = {
|
||||
.name = "gpio-keys",
|
||||
.id = -1,
|
||||
.num_resources = 0,
|
||||
.dev = {
|
||||
.platform_data = &ib62x0_button_data,
|
||||
}
|
||||
};
|
||||
|
||||
static void ib62x0_power_off(void)
|
||||
{
|
||||
gpio_set_value(IB62X0_GPIO_POWER_OFF, 1);
|
||||
}
|
||||
|
||||
void __init ib62x0_init(void)
|
||||
{
|
||||
/*
|
||||
* Basic setup. Needs to be called early.
|
||||
*/
|
||||
kirkwood_mpp_conf(ib62x0_mpp_config);
|
||||
|
||||
kirkwood_ehci_init();
|
||||
kirkwood_ge00_init(&ib62x0_ge00_data);
|
||||
kirkwood_sata_init(&ib62x0_sata_data);
|
||||
platform_device_register(&ib62x0_led_device);
|
||||
platform_device_register(&ib62x0_button_device);
|
||||
if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 &&
|
||||
gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0)
|
||||
pm_power_off = ib62x0_power_off;
|
||||
else
|
||||
pr_err("board-ib62x0: failed to configure power-off GPIO\n");
|
||||
}
|
||||
|
|
@ -70,6 +70,12 @@ void iconnect_init(void);
|
|||
static inline void iconnect_init(void) {};
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MACH_IB62X0_DT
|
||||
void ib62x0_init(void);
|
||||
#else
|
||||
static inline void ib62x0_init(void) {};
|
||||
#endif
|
||||
|
||||
/* early init functions not converted to fdt yet */
|
||||
char *kirkwood_id(void);
|
||||
void kirkwood_l2_init(void);
|
||||
|
|
|
|||
Reference in New Issue