dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

libata: PCI device should be powered up before being accessed 

PCI device should be powered up or powered up before its PCI regsiters
are accessed.  Although PCI configuration register access is allowed
in D3hot, PCI device is free to reset its status when transiting from
D3hot to D0 causing configuration data to change.

Many libata SFF drivers which use ata_pci_init_one() read and update
configuration registers before calling ata_pci_init_one() which
enables the PCI device.  Also, in resume paths, some drivers access
registers without resuming the PCI device.

This patch adds a call to pcim_enable_device() in init path if
register is accessed before calling ata_pci_init_one() and make resume
paths first resume PCI devices, access PCI configuration regiters then
resume ATA host.

While at it...

* cmd640 was strange in that it set ->resume even when CONFIG_PM is
  not.  This is by-product of minimal build fix.  Updated.

* In cs5530, Don't BUG() on reinit failure.  Just whine and fail
  resume.

Signed-off-by: Tejun Heo <htejun@gmail.com>
This commit is contained in:
Tejun Heo 2008-03-25 12:22:47 +09:00 committed by Jeff Garzik
parent b558edddb1
commit f08048e945
19 changed files with 195 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/ata/pata_ali.c
View File

@ -637,6 +637,11 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
u8 tmp;
struct pci_dev *isa_bridge;
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/*
* The chipset revision selects the driver operations and
@ -672,8 +677,15 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int ali_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
ali_init_chipset(pdev);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

16
drivers/ata/pata_amd.c
View File

@ -659,10 +659,15 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int printed_version;
int type = id->driver_data;
u8 fifo;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
@ -706,6 +711,13 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int amd_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
if (pdev->vendor == PCI_VENDOR_ID_AMD) {
u8 fifo;
pci_read_config_byte(pdev, 0x41, &fifo);
@ -718,7 +730,9 @@ static int amd_reinit_one(struct pci_dev *pdev)
pdev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
ata_pci_clear_simplex(pdev);
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

5
drivers/ata/pata_artop.c
View File

@ -446,11 +446,16 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &artop6260_ops,
};
const struct ata_port_info *ppi[] = { NULL, NULL };
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
if (id->driver_data == 0) { /* 6210 variant */
ppi[0] = &info_6210;
ppi[1] = &ata_dummy_port_info;

21
drivers/ata/pata_cmd640.c
View File

@ -254,20 +254,31 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cmd640_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
cmd640_hardware_init(pdev);
return ata_pci_init_one(pdev, ppi);
}
#ifdef CONFIG_PM
static int cmd640_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
cmd640_hardware_init(pdev);
#ifdef CONFIG_PM
return ata_pci_device_resume(pdev);
#else
ata_host_resume(host);
return 0;
#endif
}
#endif
static const struct pci_device_id cmd640[] = {
{ PCI_VDEVICE(CMD, 0x640), 0 },
@ -281,8 +292,8 @@ static struct pci_driver cmd640_pci_driver = {
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
#endif
.resume = cmd640_reinit_one,
#endif
};
static int __init cmd640_init(void)

15
drivers/ata/pata_cmd64x.c
View File

@ -435,6 +435,11 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &cmd_info[id->driver_data], NULL };
u8 mrdmode;
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@ -470,7 +475,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 mrdmode;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
mrdmode &= ~ 0x30; /* IRQ set up */
@ -479,7 +491,8 @@ static int cmd64x_reinit_one(struct pci_dev *pdev)
#ifdef CONFIG_PPC
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
#endif
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

15
drivers/ata/pata_cs5520.c
View File

@ -203,6 +203,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
struct ata_ioports *ioaddr;
int i, rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* IDE port enable bits */
pci_read_config_byte(pdev, 0x60, &pcicfg);
@ -310,11 +314,20 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
static int cs5520_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
u8 pcicfg;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
pci_read_config_byte(pdev, 0x60, &pcicfg);
if ((pcicfg & 0x40) == 0)
pci_write_config_byte(pdev, 0x60, pcicfg | 0x40);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
/**

18
drivers/ata/pata_cs5530.c
View File

@ -349,6 +349,11 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.port_ops = &cs5530_port_ops
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Chip initialisation */
if (cs5530_init_chip())
@ -364,10 +369,19 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int cs5530_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* If we fail on resume we are doomed */
if (cs5530_init_chip())
BUG();
return ata_pci_device_resume(pdev);
return -EIO;
ata_host_resume(host);
return 0;
}
#endif /* CONFIG_PM */

14
drivers/ata/pata_hpt366.c
View File

@ -402,6 +402,11 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
u32 class_rev;
u32 reg1;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;
@ -435,8 +440,15 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int hpt36x_reinit_one(struct pci_dev *dev)
{
struct ata_host *host = dev_get_drvdata(&dev->dev);
int rc;
rc = ata_pci_device_do_resume(dev);
if (rc)
return rc;
hpt36x_init_chipset(dev);
return ata_pci_device_resume(dev);
ata_host_resume(host);
return 0;
}
#endif

5
drivers/ata/pata_hpt37x.c
View File

@ -966,6 +966,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
const struct hpt_chip *chip_table;
int clock_slot;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;

5
drivers/ata/pata_hpt3x2n.c
View File

@ -505,6 +505,11 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
unsigned int f_low, f_high;
int adjust;
unsigned long iobase = pci_resource_start(dev, 4);
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xFF;

14
drivers/ata/pata_it821x.c
View File

@ -759,6 +759,11 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
const struct ata_port_info *ppi[] = { NULL, NULL };
static char *mode[2] = { "pass through", "smart" };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Force the card into bypass mode if so requested */
if (it8212_noraid) {
@ -780,10 +785,17 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
#ifdef CONFIG_PM
static int it821x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* Resume - turn raid back off if need be */
if (it8212_noraid)
it821x_disable_raid(pdev);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return rc;
}
#endif

5
drivers/ata/pata_netcell.c
View File

@ -100,11 +100,16 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
.port_ops = &netcell_ops,
};
const struct ata_port_info *port_info[] = { &info, NULL };
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Any chip specific setup/optimisation/messages here */
ata_pci_clear_simplex(pdev);

6
drivers/ata/pata_ns87415.c
View File

@ -410,6 +410,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
.port_ops = &ns87415_pata_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
int rc;
#if defined(CONFIG_SUPERIO)
static const struct ata_port_info info87560 = {
.sht = &ns87415_sht,
@ -425,6 +426,11 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Select 512 byte sectors */
pci_write_config_byte(pdev, 0x55, 0xEE);
/* Select PIO0 8bit clocking */

5
drivers/ata/pata_optidma.c
View File

@ -497,10 +497,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info_82c700, NULL };
static int printed_version;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(dev);
if (rc)
return rc;
/* Fixed location chipset magic */
inw(0x1F1);
inw(0x1F1);

19
drivers/ata/pata_serverworks.c
View File

@ -498,6 +498,11 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
}
};
const struct ata_port_info *ppi[] = { &info[id->driver_data], NULL };
int rc;
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
@ -535,11 +540,17 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
#ifdef CONFIG_PM
static int serverworks_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
/* Force master latency timer to 64 PCI clocks */
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
switch (pdev->device)
{
switch (pdev->device) {
case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
serverworks_fixup_osb4(pdev);
break;
@ -554,7 +565,9 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
serverworks_fixup_ht1000(pdev);
break;
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

13
drivers/ata/pata_sil680.c
View File

@ -346,6 +346,10 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
switch (sil680_init_chip(pdev, &try_mmio)) {
case 0:
ppi[0] = &info_slow;
@ -406,10 +410,15 @@ use_ioports:
#ifdef CONFIG_PM
static int sil680_reinit_one(struct pci_dev *pdev)
{
int try_mmio;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
int try_mmio, rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
sil680_init_chip(pdev, &try_mmio);
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif

6
drivers/ata/pata_sis.c
View File

@ -862,6 +862,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
struct pci_dev *host = NULL;
struct sis_chipset *chipset = NULL;
struct sis_chipset *sets;
int rc;
static struct sis_chipset sis_chipsets[] = {
@ -914,8 +915,11 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
dev_printk(KERN_DEBUG, &pdev->dev,
"version " DRV_VERSION "\n");
/* We have to find the bridge first */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* We have to find the bridge first */
for (sets = &sis_chipsets[0]; sets->device; sets++) {
host = pci_get_device(PCI_VENDOR_ID_SI, sets->device, NULL);
if (host != NULL) {

5
drivers/ata/pata_sl82c105.c
View File

@ -344,6 +344,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
NULL };
u32 val;
int rev;
int rc;
rc = pcim_enable_device(dev);
if (rc)
return rc;
rev = sl82c105_bridge_revision(dev);

14
drivers/ata/pata_via.c
View File

@ -524,10 +524,15 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int printed_version;
u8 enable;
u32 timing;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
/* To find out how the IDE will behave and what features we
actually have to look at the bridge not the IDE controller */
for (config = via_isa_bridges; config->id; config++)
@ -615,6 +620,11 @@ static int via_reinit_one(struct pci_dev *pdev)
u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
const struct via_isa_bridge *config = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
via_config_fifo(pdev, config->flags);
@ -630,7 +640,9 @@ static int via_reinit_one(struct pci_dev *pdev)
timing &= ~0x80008;
pci_write_config_dword(pdev, 0x50, timing);
}
return ata_pci_device_resume(pdev);
ata_host_resume(host);
return 0;
}
#endif