[media] tda9875: remove duplicate driver
In commit 411674fd18
the tda9875 support was
added to tvaudio. This means that tda9875 is no longer used since mid-2009.
If there are out-of-tree users of this driver, then they can switch to tvaudio
instead.
The original commit message read as follows:
This change allows bttv to use tvaudio for this device. Since this device
has the same i2c address as the tda9874 we need to support both in the same
tvaudio driver. This makes it possible for tvaudio to detect which chip is
used. Originally the tda9875 was only available in the dedicated tda9875
driver, but that makes life very hard for bttv since loading tvaudio might
misdetect a tda9875 as a tda9874.
So there were good reasons for moving the tda9875 code into tvaudio.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
parent
c56eb8fb6d
commit
f037484337
3 changed files with 0 additions and 421 deletions
|
@ -141,15 +141,6 @@ config VIDEO_TDA9840
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called tda9840.
|
||||
|
||||
config VIDEO_TDA9875
|
||||
tristate "Philips TDA9875 audio processor"
|
||||
depends on VIDEO_V4L2 && I2C
|
||||
---help---
|
||||
Support for tda9875 audio decoder chip found on some bt8xx boards.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called tda9875.
|
||||
|
||||
config VIDEO_TEA6415C
|
||||
tristate "Philips TEA6415C audio processor"
|
||||
depends on I2C
|
||||
|
|
|
@ -27,7 +27,6 @@ obj-$(CONFIG_VIDEO_V4L2_COMMON) += v4l2-common.o
|
|||
obj-$(CONFIG_VIDEO_TUNER) += tuner.o
|
||||
obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o
|
||||
obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o
|
||||
obj-$(CONFIG_VIDEO_TDA9875) += tda9875.o
|
||||
obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o
|
||||
obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o
|
||||
obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o
|
||||
|
|
|
@ -1,411 +0,0 @@
|
|||
/*
|
||||
* For the TDA9875 chip
|
||||
* (The TDA9875 is used on the Diamond DTV2000 french version
|
||||
* Other cards probably use these chips as well.)
|
||||
* This driver will not complain if used with any
|
||||
* other i2c device with the same address.
|
||||
*
|
||||
* Copyright (c) 2000 Guillaume Delvit based on Gerd Knorr source and
|
||||
* Eric Sandeen
|
||||
* Copyright (c) 2006 Mauro Carvalho Chehab <mchehab@infradead.org>
|
||||
* This code is placed under the terms of the GNU General Public License
|
||||
* Based on tda9855.c by Steve VanDeBogart (vandebo@uclink.berkeley.edu)
|
||||
* Which was based on tda8425.c by Greg Alexander (c) 1998
|
||||
*
|
||||
* OPTIONS:
|
||||
* debug - set to 1 if you'd like to see debug messages
|
||||
*
|
||||
* Revision: 0.1 - original version
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/string.h>
|
||||
#include <linux/timer.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/videodev2.h>
|
||||
#include <media/v4l2-device.h>
|
||||
#include <media/i2c-addr.h>
|
||||
|
||||
static int debug; /* insmod parameter */
|
||||
module_param(debug, int, S_IRUGO | S_IWUSR);
|
||||
MODULE_LICENSE("GPL");
|
||||
|
||||
|
||||
/* This is a superset of the TDA9875 */
|
||||
struct tda9875 {
|
||||
struct v4l2_subdev sd;
|
||||
int rvol, lvol;
|
||||
int bass, treble;
|
||||
};
|
||||
|
||||
static inline struct tda9875 *to_state(struct v4l2_subdev *sd)
|
||||
{
|
||||
return container_of(sd, struct tda9875, sd);
|
||||
}
|
||||
|
||||
#define dprintk if (debug) printk
|
||||
|
||||
/* The TDA9875 is made by Philips Semiconductor
|
||||
* http://www.semiconductors.philips.com
|
||||
* TDA9875: I2C-bus controlled DSP audio processor, FM demodulator
|
||||
*
|
||||
*/
|
||||
|
||||
/* subaddresses for TDA9875 */
|
||||
#define TDA9875_MUT 0x12 /*General mute (value --> 0b11001100*/
|
||||
#define TDA9875_CFG 0x01 /* Config register (value --> 0b00000000 */
|
||||
#define TDA9875_DACOS 0x13 /*DAC i/o select (ADC) 0b0000100*/
|
||||
#define TDA9875_LOSR 0x16 /*Line output select regirter 0b0100 0001*/
|
||||
|
||||
#define TDA9875_CH1V 0x0c /*Channel 1 volume (mute)*/
|
||||
#define TDA9875_CH2V 0x0d /*Channel 2 volume (mute)*/
|
||||
#define TDA9875_SC1 0x14 /*SCART 1 in (mono)*/
|
||||
#define TDA9875_SC2 0x15 /*SCART 2 in (mono)*/
|
||||
|
||||
#define TDA9875_ADCIS 0x17 /*ADC input select (mono) 0b0110 000*/
|
||||
#define TDA9875_AER 0x19 /*Audio effect (AVL+Pseudo) 0b0000 0110*/
|
||||
#define TDA9875_MCS 0x18 /*Main channel select (DAC) 0b0000100*/
|
||||
#define TDA9875_MVL 0x1a /* Main volume gauche */
|
||||
#define TDA9875_MVR 0x1b /* Main volume droite */
|
||||
#define TDA9875_MBA 0x1d /* Main Basse */
|
||||
#define TDA9875_MTR 0x1e /* Main treble */
|
||||
#define TDA9875_ACS 0x1f /* Auxilary channel select (FM) 0b0000000*/
|
||||
#define TDA9875_AVL 0x20 /* Auxilary volume gauche */
|
||||
#define TDA9875_AVR 0x21 /* Auxilary volume droite */
|
||||
#define TDA9875_ABA 0x22 /* Auxilary Basse */
|
||||
#define TDA9875_ATR 0x23 /* Auxilary treble */
|
||||
|
||||
#define TDA9875_MSR 0x02 /* Monitor select register */
|
||||
#define TDA9875_C1MSB 0x03 /* Carrier 1 (FM) frequency register MSB */
|
||||
#define TDA9875_C1MIB 0x04 /* Carrier 1 (FM) frequency register (16-8]b */
|
||||
#define TDA9875_C1LSB 0x05 /* Carrier 1 (FM) frequency register LSB */
|
||||
#define TDA9875_C2MSB 0x06 /* Carrier 2 (nicam) frequency register MSB */
|
||||
#define TDA9875_C2MIB 0x07 /* Carrier 2 (nicam) frequency register (16-8]b */
|
||||
#define TDA9875_C2LSB 0x08 /* Carrier 2 (nicam) frequency register LSB */
|
||||
#define TDA9875_DCR 0x09 /* Demodulateur configuration regirter*/
|
||||
#define TDA9875_DEEM 0x0a /* FM de-emphasis regirter*/
|
||||
#define TDA9875_FMAT 0x0b /* FM Matrix regirter*/
|
||||
|
||||
/* values */
|
||||
#define TDA9875_MUTE_ON 0xff /* general mute */
|
||||
#define TDA9875_MUTE_OFF 0xcc /* general no mute */
|
||||
|
||||
|
||||
|
||||
/* Begin code */
|
||||
|
||||
static int tda9875_write(struct v4l2_subdev *sd, int subaddr, unsigned char val)
|
||||
{
|
||||
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
||||
unsigned char buffer[2];
|
||||
|
||||
v4l2_dbg(1, debug, sd, "Writing %d 0x%x\n", subaddr, val);
|
||||
buffer[0] = subaddr;
|
||||
buffer[1] = val;
|
||||
if (2 != i2c_master_send(client, buffer, 2)) {
|
||||
v4l2_warn(sd, "I/O error, trying (write %d 0x%x)\n",
|
||||
subaddr, val);
|
||||
return -1;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int i2c_read_register(struct i2c_client *client, int addr, int reg)
|
||||
{
|
||||
unsigned char write[1];
|
||||
unsigned char read[1];
|
||||
struct i2c_msg msgs[2] = {
|
||||
{ addr, 0, 1, write },
|
||||
{ addr, I2C_M_RD, 1, read }
|
||||
};
|
||||
|
||||
write[0] = reg;
|
||||
|
||||
if (2 != i2c_transfer(client->adapter, msgs, 2)) {
|
||||
v4l_warn(client, "I/O error (read2)\n");
|
||||
return -1;
|
||||
}
|
||||
v4l_dbg(1, debug, client, "chip_read2: reg%d=0x%x\n", reg, read[0]);
|
||||
return read[0];
|
||||
}
|
||||
|
||||
static void tda9875_set(struct v4l2_subdev *sd)
|
||||
{
|
||||
struct tda9875 *tda = to_state(sd);
|
||||
unsigned char a;
|
||||
|
||||
v4l2_dbg(1, debug, sd, "tda9875_set(%04x,%04x,%04x,%04x)\n",
|
||||
tda->lvol, tda->rvol, tda->bass, tda->treble);
|
||||
|
||||
a = tda->lvol & 0xff;
|
||||
tda9875_write(sd, TDA9875_MVL, a);
|
||||
a =tda->rvol & 0xff;
|
||||
tda9875_write(sd, TDA9875_MVR, a);
|
||||
a =tda->bass & 0xff;
|
||||
tda9875_write(sd, TDA9875_MBA, a);
|
||||
a =tda->treble & 0xff;
|
||||
tda9875_write(sd, TDA9875_MTR, a);
|
||||
}
|
||||
|
||||
static void do_tda9875_init(struct v4l2_subdev *sd)
|
||||
{
|
||||
struct tda9875 *t = to_state(sd);
|
||||
|
||||
v4l2_dbg(1, debug, sd, "In tda9875_init\n");
|
||||
tda9875_write(sd, TDA9875_CFG, 0xd0); /*reg de config 0 (reset)*/
|
||||
tda9875_write(sd, TDA9875_MSR, 0x03); /* Monitor 0b00000XXX*/
|
||||
tda9875_write(sd, TDA9875_C1MSB, 0x00); /*Car1(FM) MSB XMHz*/
|
||||
tda9875_write(sd, TDA9875_C1MIB, 0x00); /*Car1(FM) MIB XMHz*/
|
||||
tda9875_write(sd, TDA9875_C1LSB, 0x00); /*Car1(FM) LSB XMHz*/
|
||||
tda9875_write(sd, TDA9875_C2MSB, 0x00); /*Car2(NICAM) MSB XMHz*/
|
||||
tda9875_write(sd, TDA9875_C2MIB, 0x00); /*Car2(NICAM) MIB XMHz*/
|
||||
tda9875_write(sd, TDA9875_C2LSB, 0x00); /*Car2(NICAM) LSB XMHz*/
|
||||
tda9875_write(sd, TDA9875_DCR, 0x00); /*Demod config 0x00*/
|
||||
tda9875_write(sd, TDA9875_DEEM, 0x44); /*DE-Emph 0b0100 0100*/
|
||||
tda9875_write(sd, TDA9875_FMAT, 0x00); /*FM Matrix reg 0x00*/
|
||||
tda9875_write(sd, TDA9875_SC1, 0x00); /* SCART 1 (SC1)*/
|
||||
tda9875_write(sd, TDA9875_SC2, 0x01); /* SCART 2 (sc2)*/
|
||||
|
||||
tda9875_write(sd, TDA9875_CH1V, 0x10); /* Channel volume 1 mute*/
|
||||
tda9875_write(sd, TDA9875_CH2V, 0x10); /* Channel volume 2 mute */
|
||||
tda9875_write(sd, TDA9875_DACOS, 0x02); /* sig DAC i/o(in:nicam)*/
|
||||
tda9875_write(sd, TDA9875_ADCIS, 0x6f); /* sig ADC input(in:mono)*/
|
||||
tda9875_write(sd, TDA9875_LOSR, 0x00); /* line out (in:mono)*/
|
||||
tda9875_write(sd, TDA9875_AER, 0x00); /*06 Effect (AVL+PSEUDO) */
|
||||
tda9875_write(sd, TDA9875_MCS, 0x44); /* Main ch select (DAC) */
|
||||
tda9875_write(sd, TDA9875_MVL, 0x03); /* Vol Main left 10dB */
|
||||
tda9875_write(sd, TDA9875_MVR, 0x03); /* Vol Main right 10dB*/
|
||||
tda9875_write(sd, TDA9875_MBA, 0x00); /* Main Bass Main 0dB*/
|
||||
tda9875_write(sd, TDA9875_MTR, 0x00); /* Main Treble Main 0dB*/
|
||||
tda9875_write(sd, TDA9875_ACS, 0x44); /* Aux chan select (dac)*/
|
||||
tda9875_write(sd, TDA9875_AVL, 0x00); /* Vol Aux left 0dB*/
|
||||
tda9875_write(sd, TDA9875_AVR, 0x00); /* Vol Aux right 0dB*/
|
||||
tda9875_write(sd, TDA9875_ABA, 0x00); /* Aux Bass Main 0dB*/
|
||||
tda9875_write(sd, TDA9875_ATR, 0x00); /* Aux Aigus Main 0dB*/
|
||||
|
||||
tda9875_write(sd, TDA9875_MUT, 0xcc); /* General mute */
|
||||
|
||||
t->lvol = t->rvol = 0; /* 0dB */
|
||||
t->bass = 0; /* 0dB */
|
||||
t->treble = 0; /* 0dB */
|
||||
tda9875_set(sd);
|
||||
}
|
||||
|
||||
|
||||
static int tda9875_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
||||
{
|
||||
struct tda9875 *t = to_state(sd);
|
||||
|
||||
switch (ctrl->id) {
|
||||
case V4L2_CID_AUDIO_VOLUME:
|
||||
{
|
||||
int left = (t->lvol+84)*606;
|
||||
int right = (t->rvol+84)*606;
|
||||
|
||||
ctrl->value=max(left,right);
|
||||
return 0;
|
||||
}
|
||||
case V4L2_CID_AUDIO_BALANCE:
|
||||
{
|
||||
int left = (t->lvol+84)*606;
|
||||
int right = (t->rvol+84)*606;
|
||||
int volume = max(left,right);
|
||||
int balance = (32768*min(left,right))/
|
||||
(volume ? volume : 1);
|
||||
ctrl->value=(left<right)?
|
||||
(65535-balance) : balance;
|
||||
return 0;
|
||||
}
|
||||
case V4L2_CID_AUDIO_BASS:
|
||||
ctrl->value = (t->bass+12)*2427; /* min -12 max +15 */
|
||||
return 0;
|
||||
case V4L2_CID_AUDIO_TREBLE:
|
||||
ctrl->value = (t->treble+12)*2730;/* min -12 max +12 */
|
||||
return 0;
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int tda9875_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
|
||||
{
|
||||
struct tda9875 *t = to_state(sd);
|
||||
int chvol = 0, volume = 0, balance = 0, left, right;
|
||||
|
||||
switch (ctrl->id) {
|
||||
case V4L2_CID_AUDIO_VOLUME:
|
||||
left = (t->lvol+84)*606;
|
||||
right = (t->rvol+84)*606;
|
||||
|
||||
volume = max(left,right);
|
||||
balance = (32768*min(left,right))/
|
||||
(volume ? volume : 1);
|
||||
balance =(left<right)?
|
||||
(65535-balance) : balance;
|
||||
|
||||
volume = ctrl->value;
|
||||
|
||||
chvol=1;
|
||||
break;
|
||||
case V4L2_CID_AUDIO_BALANCE:
|
||||
left = (t->lvol+84)*606;
|
||||
right = (t->rvol+84)*606;
|
||||
|
||||
volume=max(left,right);
|
||||
|
||||
balance = ctrl->value;
|
||||
|
||||
chvol=1;
|
||||
break;
|
||||
case V4L2_CID_AUDIO_BASS:
|
||||
t->bass = ((ctrl->value/2400)-12) & 0xff;
|
||||
if (t->bass > 15)
|
||||
t->bass = 15;
|
||||
if (t->bass < -12)
|
||||
t->bass = -12 & 0xff;
|
||||
break;
|
||||
case V4L2_CID_AUDIO_TREBLE:
|
||||
t->treble = ((ctrl->value/2700)-12) & 0xff;
|
||||
if (t->treble > 12)
|
||||
t->treble = 12;
|
||||
if (t->treble < -12)
|
||||
t->treble = -12 & 0xff;
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (chvol) {
|
||||
left = (min(65536 - balance,32768) *
|
||||
volume) / 32768;
|
||||
right = (min(balance,32768) *
|
||||
volume) / 32768;
|
||||
t->lvol = ((left/606)-84) & 0xff;
|
||||
if (t->lvol > 24)
|
||||
t->lvol = 24;
|
||||
if (t->lvol < -84)
|
||||
t->lvol = -84 & 0xff;
|
||||
|
||||
t->rvol = ((right/606)-84) & 0xff;
|
||||
if (t->rvol > 24)
|
||||
t->rvol = 24;
|
||||
if (t->rvol < -84)
|
||||
t->rvol = -84 & 0xff;
|
||||
}
|
||||
|
||||
tda9875_set(sd);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tda9875_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
|
||||
{
|
||||
switch (qc->id) {
|
||||
case V4L2_CID_AUDIO_VOLUME:
|
||||
return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 58880);
|
||||
case V4L2_CID_AUDIO_BASS:
|
||||
case V4L2_CID_AUDIO_TREBLE:
|
||||
return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
static const struct v4l2_subdev_core_ops tda9875_core_ops = {
|
||||
.queryctrl = tda9875_queryctrl,
|
||||
.g_ctrl = tda9875_g_ctrl,
|
||||
.s_ctrl = tda9875_s_ctrl,
|
||||
};
|
||||
|
||||
static const struct v4l2_subdev_ops tda9875_ops = {
|
||||
.core = &tda9875_core_ops,
|
||||
};
|
||||
|
||||
/* ----------------------------------------------------------------------- */
|
||||
|
||||
|
||||
/* *********************** *
|
||||
* i2c interface functions *
|
||||
* *********************** */
|
||||
|
||||
static int tda9875_checkit(struct i2c_client *client, int addr)
|
||||
{
|
||||
int dic, rev;
|
||||
|
||||
dic = i2c_read_register(client, addr, 254);
|
||||
rev = i2c_read_register(client, addr, 255);
|
||||
|
||||
if (dic == 0 || dic == 2) { /* tda9875 and tda9875A */
|
||||
v4l_info(client, "tda9875%s rev. %d detected at 0x%02x\n",
|
||||
dic == 0 ? "" : "A", rev, addr << 1);
|
||||
return 1;
|
||||
}
|
||||
v4l_info(client, "no such chip at 0x%02x (dic=0x%x rev=0x%x)\n",
|
||||
addr << 1, dic, rev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tda9875_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct tda9875 *t;
|
||||
struct v4l2_subdev *sd;
|
||||
|
||||
v4l_info(client, "chip found @ 0x%02x (%s)\n",
|
||||
client->addr << 1, client->adapter->name);
|
||||
|
||||
if (!tda9875_checkit(client, client->addr))
|
||||
return -ENODEV;
|
||||
|
||||
t = kzalloc(sizeof(*t), GFP_KERNEL);
|
||||
if (!t)
|
||||
return -ENOMEM;
|
||||
sd = &t->sd;
|
||||
v4l2_i2c_subdev_init(sd, client, &tda9875_ops);
|
||||
|
||||
do_tda9875_init(sd);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int tda9875_remove(struct i2c_client *client)
|
||||
{
|
||||
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
||||
|
||||
do_tda9875_init(sd);
|
||||
v4l2_device_unregister_subdev(sd);
|
||||
kfree(to_state(sd));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id tda9875_id[] = {
|
||||
{ "tda9875", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, tda9875_id);
|
||||
|
||||
static struct i2c_driver tda9875_driver = {
|
||||
.driver = {
|
||||
.owner = THIS_MODULE,
|
||||
.name = "tda9875",
|
||||
},
|
||||
.probe = tda9875_probe,
|
||||
.remove = tda9875_remove,
|
||||
.id_table = tda9875_id,
|
||||
};
|
||||
|
||||
static __init int init_tda9875(void)
|
||||
{
|
||||
return i2c_add_driver(&tda9875_driver);
|
||||
}
|
||||
|
||||
static __exit void exit_tda9875(void)
|
||||
{
|
||||
i2c_del_driver(&tda9875_driver);
|
||||
}
|
||||
|
||||
module_init(init_tda9875);
|
||||
module_exit(exit_tda9875);
|
Reference in a new issue