dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Staging: rtl8187se: Fix typos. 

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Justin P. Mattock 2012-04-17 06:56:43 -07:00 committed by Greg Kroah-Hartman
parent 15ecf29e16
commit ed2cb4f3b5
14 changed files with 63 additions and 63 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/staging/rtl8187se/Makefile
View File

@ -10,7 +10,7 @@ ccflags-y += -DHIGH_POWER
ccflags-y += -DSW_DIG
ccflags-y += -DRATE_ADAPT
#enable it for legacy power save, disable it for leisure power save
#enable it for legacy power save, disable it for leisure power save
ccflags-y += -DENABLE_LPS

2
drivers/staging/rtl8187se/ieee80211/dot11d.c
View File

@ -55,7 +55,7 @@ Dot11d_Reset(struct ieee80211_device *ieee)
//
// Description:
// Update country IE from Beacon or Probe Resopnse
// Update country IE from Beacon or Probe Response
// and configure PHY for operation in the regulatory domain.
//
// TODO:

14
drivers/staging/rtl8187se/ieee80211/ieee80211.h
View File

@ -834,7 +834,7 @@ enum ieee80211_state {
/* the association procedure is sending AUTH request*/
IEEE80211_ASSOCIATING_AUTHENTICATING,
/* the association procedure has successfully authentcated
/* the association procedure has successfully authenticated
* and is sending association request
*/
IEEE80211_ASSOCIATING_AUTHENTICATED,
@ -934,7 +934,7 @@ struct ieee80211_device {
* with RX of broad/multicast frames */
/* Fragmentation structures */
// each streaming contain a entry
/* each stream contains an entry */
struct ieee80211_frag_entry frag_cache[17][IEEE80211_FRAG_CACHE_LEN];
unsigned int frag_next_idx[17];
u16 fts; /* Fragmentation Threshold */
@ -972,7 +972,7 @@ struct ieee80211_device {
int rate; /* current rate */
int basic_rate;
//FIXME: pleace callback, see if redundant with softmac_features
//FIXME: please callback, see if redundant with softmac_features
short active_scan;
/* this contains flags for selectively enable softmac support */
@ -1106,7 +1106,7 @@ struct ieee80211_device {
/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
* if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
* frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
* frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
* then also management frames are sent via this callback.
* This function can't sleep.
*/
@ -1124,7 +1124,7 @@ struct ieee80211_device {
/* ask to the driver to retune the radio .
* This function can sleep. the driver should ensure
* the radio has been swithced before return.
* the radio has been switched before return.
*/
void (*set_chan)(struct net_device *dev,short ch);
@ -1135,7 +1135,7 @@ struct ieee80211_device {
* The syncro version is similar to the start_scan but
* does not return until all channels has been scanned.
* this is called in user context and should sleep,
* it is called in a work_queue when swithcing to ad-hoc mode
* it is called in a work_queue when switching to ad-hoc mode
* or in behalf of iwlist scan when the card is associated
* and root user ask for a scan.
* the function stop_scan should stop both the syncro and
@ -1196,7 +1196,7 @@ struct ieee80211_device {
/* Generate probe requests */
#define IEEE_SOFTMAC_PROBERQ (1<<4)
/* Generate respones to probe requests */
/* Generate response to probe requests */
#define IEEE_SOFTMAC_PROBERS (1<<5)
/* The ieee802.11 stack will manages the netif queue

24
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
View File

@ -42,7 +42,7 @@ short ieee80211_is_shortslot(const struct ieee80211_network *net)
return net->capability & WLAN_CAPABILITY_SHORT_SLOT;
}
/* returns the total length needed for pleacing the RATE MFIE
/* returns the total length needed for placing the RATE MFIE
* tag and the EXTENDED RATE MFIE tag if needed.
* It encludes two bytes per tag for the tag itself and its len
*/
@ -60,7 +60,7 @@ unsigned int ieee80211_MFIE_rate_len(struct ieee80211_device *ieee)
return rate_len;
}
/* pleace the MFIE rate, tag to the memory (double) poined.
/* place the MFIE rate, tag to the memory (double) poised.
* Then it updates the pointer so that
* it points after the new MFIE tag added.
*/
@ -467,7 +467,7 @@ void ieee80211_softmac_scan_syncro(struct ieee80211_device *ieee)
* So we switch to IEEE80211_LINKED_SCANNING to remember
* that we are still logically linked (not interested in
* new network events, despite for updating the net list,
* but we are temporarly 'unlinked' as the driver shall
* but we are temporarily 'unlinked' as the driver shall
* not filter RX frames and the channel is changing.
* So the only situation in witch are interested is to check
* if the state become LINKED because of the #1 situation
@ -530,7 +530,7 @@ void ieee80211_softmac_ips_scan_syncro(struct ieee80211_device *ieee)
* So we switch to IEEE80211_LINKED_SCANNING to remember
* that we are still logically linked (not interested in
* new network events, despite for updating the net list,
* but we are temporarly 'unlinked' as the driver shall
* but we are temporarily 'unlinked' as the driver shall
* not filter RX frames and the channel is changing.
* So the only situation in witch are interested is to check
* if the state become LINKED because of the #1 situation
@ -1140,7 +1140,7 @@ void ieee80211_associate_abort(struct ieee80211_device *ieee)
ieee->associate_seq++;
/* don't scan, and avoid to have the RX path possibily
/* don't scan, and avoid to have the RX path possibly
* try again to associate. Even do not react to AUTH or
* ASSOC response. Just wait for the retry wq to be scheduled.
* Here we will check if there are good nets to associate
@ -1346,14 +1346,14 @@ inline void ieee80211_softmac_new_net(struct ieee80211_device *ieee, struct ieee
//printk("apset=%d apmatch=%d ssidset=%d ssidbroad=%d ssidmatch=%d\n",apset,apmatch,ssidset,ssidbroad,ssidmatch);
if ( /* if the user set the AP check if match.
* if the network does not broadcast essid we check the user supplyed ANY essid
* if the network does not broadcast essid we check the user supplied ANY essid
* if the network does broadcast and the user does not set essid it is OK
* if the network does broadcast and the user did set essid chech if essid match
*/
( apset && apmatch &&
((ssidset && ssidbroad && ssidmatch) || (ssidbroad && !ssidset) || (!ssidbroad && ssidset)) ) ||
/* if the ap is not set, check that the user set the bssid
* and the network does bradcast and that those two bssid matches
* and the network does broadcast and that those two bssid matches
*/
(!apset && ssidset && ssidbroad && ssidmatch)
){
@ -1821,7 +1821,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
while (left >= sizeof(struct ieee80211_info_element_hdr)) {
if (sizeof(struct ieee80211_info_element_hdr) + info_element->len > left) {
printk(KERN_WARNING "[re]associate reeponse error!");
printk(KERN_WARNING "[re]associate response error!");
return 1;
}
switch (info_element->id) {
@ -2184,15 +2184,15 @@ void ieee80211_start_ibss_wq(struct work_struct *work)
if(ieee->state == IEEE80211_NOLINK)
ieee->current_network.channel = 10;
/* if not then the state is not linked. Maybe the user swithced to
/* if not then the state is not linked. Maybe the user switched to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
* time to scan all the chans..) or we have just run up the iface
* after setting ad-hoc mode. So we have to give another try..
* Here, in ibss mode, should be safe to do this without extra care
* (in bss mode we had to make sure no-one tryed to associate when
* (in bss mode we had to make sure no-one tried to associate when
* we had just checked the ieee->state and we was going to start the
* scan) beacause in ibss mode the ieee80211_new_net function, when
* scan) because in ibss mode the ieee80211_new_net function, when
* finds a good net, just set the ieee->state to IEEE80211_LINKED,
* so, at worst, we waste a bit of time to initiate an unneeded syncro
* scan, that will stop at the first round because it sees the state
@ -2342,7 +2342,7 @@ void ieee80211_associate_retry_wq(struct work_struct *work)
goto exit;
/* until we do not set the state to IEEE80211_NOLINK
* there are no possibility to have someone else trying
* to start an association procdure (we get here with
* to start an association procedure (we get here with
* ieee->state = IEEE80211_ASSOCIATING).
* When we set the state to IEEE80211_NOLINK it is possible
* that the RX path run an attempt to associate, but

2
drivers/staging/rtl8187se/ieee80211/ieee80211_softmac_wx.c
View File

@ -362,7 +362,7 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
ieee80211_stop_protocol(ieee);
/* this is just to be sure that the GET wx callback
* has consisten infos. not needed otherwise
* has consistent infos. not needed otherwise
*/
spin_lock_irqsave(&ieee->lock, flags);

2
drivers/staging/rtl8187se/ieee80211/ieee80211_tx.c
View File

@ -328,7 +328,7 @@ int ieee80211_rtl_xmit(struct sk_buff *skb,
//printk(KERN_WARNING "upper layer packet!\n");
spin_lock_irqsave(&ieee->lock, flags);
/* If there is no driver handler to take the TXB, dont' bother
/* If there is no driver handler to take the TXB, don't bother
* creating it... */
if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {

2
drivers/staging/rtl8187se/ieee80211/ieee80211_wx.c
View File

@ -363,7 +363,7 @@ int ieee80211_wx_set_encode(struct ieee80211_device *ieee,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
* explicitely set */
* explicitly set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
ieee->tx_keyidx = key;//by wb 080312

10
drivers/staging/rtl8187se/r8180.h
View File

@ -11,7 +11,7 @@
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
We want to tanks the Authors of those projects and the Ndiswrapper
We want to thanks the Authors of those projects and the Ndiswrapper
project Authors.
*/
@ -514,12 +514,12 @@ typedef struct r8180_priv
bool bDefaultAntenna1;
u8 SignalStrength;
long Stats_SignalStrength;
long LastSignalStrengthInPercent; // In percentange, used for smoothing, e.g. Moving Average.
long LastSignalStrengthInPercent; // In percentage, used for smoothing, e.g. Moving Average.
u8 SignalQuality; // in 0-100 index.
long Stats_SignalQuality;
long RecvSignalPower; // in dBm.
long Stats_RecvSignalPower;
u8 LastRxPktAntenna; // +by amy 080312 Antenn which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
u8 LastRxPktAntenna; // +by amy 080312 Antenna which received the lasted packet. 0: Aux, 1:Main. Added by Roger, 2008.01.25.
u32 AdRxOkCnt;
long AdRxSignalStrength;
u8 CurrAntennaIndex; // Index to current Antenna (both Tx and Rx).
@ -530,7 +530,7 @@ typedef struct r8180_priv
long AdRxSsThreshold; // Signal strength threshold to switch antenna.
long AdMaxRxSsThreshold; // Max value of AdRxSsThreshold.
bool bAdSwitchedChecking; // TRUE if we shall shall check Rx signal strength for last time switching antenna.
long AdRxSsBeforeSwitched; // Rx signal strength before we swithed antenna.
long AdRxSsBeforeSwitched; // Rx signal strength before we switched antenna.
struct timer_list SwAntennaDiversityTimer;
//by amy for antenna
//{by amy 080312
@ -553,7 +553,7 @@ typedef struct r8180_priv
bool bDigMechanism; // TRUE if DIG is enabled, FALSE ow.
bool bRegHighPowerMechanism; // For High Power Mechanism. 061010, by rcnjko.
u32 FalseAlarmRegValue;
u8 RegDigOfdmFaUpTh; // Upper threhold of OFDM false alarm, which is used in DIG.
u8 RegDigOfdmFaUpTh; // Upper threshold of OFDM false alarm, which is used in DIG.
u8 DIG_NumberFallbackVote;
u8 DIG_NumberUpgradeVote;
// For HW antenna diversity, added by Roger, 2008.01.30.

30
drivers/staging/rtl8187se/r8180_core.c
View File

@ -1329,7 +1329,7 @@ u16 N_DBPSOfRate(u16 DataRate)
}
/*
* For Netgear case, they want good-looking singal strength.
* For Netgear case, they want good-looking signal strength.
*/
long NetgearSignalStrengthTranslate(long LastSS, long CurrSS)
{
@ -1380,7 +1380,7 @@ long TranslateToDbm8185(u8 SignalStrengthIndex)
/*
* Perform signal smoothing for dynamic mechanism.
* This is different with PerformSignalSmoothing8185 in smoothing fomula.
* This is different with PerformSignalSmoothing8185 in smoothing formula.
* No dramatic adjustion is apply because dynamic mechanism need some degree
* of correctness. Ported from 8187B.
*/
@ -1535,7 +1535,7 @@ void rtl8180_rx(struct net_device *dev)
/* HW is probably passing several buggy frames
* without FD or LD flag set.
* Throw this garbage away to prevent skb
* memory exausting
* memory exhausting
*/
if (!priv->rx_skb_complete)
dev_kfree_skb_any(priv->rx_skb);
@ -1648,14 +1648,14 @@ void rtl8180_rx(struct net_device *dev)
priv->Stats_SignalQuality = (long)(priv->Stats_SignalQuality * 5 + (long)priv->SignalQuality + 5) / 6;
priv->Stats_RecvSignalPower = (long)(priv->Stats_RecvSignalPower * 5 + priv->RecvSignalPower - 1) / 6;
/* Figure out which antenna that received the lasted packet. */
/* Figure out which antenna that received the last packet. */
priv->LastRxPktAntenna = Antenna ? 1 : 0; /* 0: aux, 1: main. */
SwAntennaDiversityRxOk8185(dev, priv->SignalStrength);
}
if (first) {
if (!priv->rx_skb_complete) {
/* seems that HW sometimes fails to reiceve and
/* seems that HW sometimes fails to receive and
doesn't provide the last descriptor */
dev_kfree_skb_any(priv->rx_skb);
priv->stats.rxnolast++;
@ -1672,7 +1672,7 @@ void rtl8180_rx(struct net_device *dev)
priv->rx_skb_complete = 0;
priv->rx_skb->dev = dev;
} else {
/* if we are here we should have already RXed
/* if we are here we should have already RXed
* the first frame.
* If we get here and the skb is not allocated then
* we have just throw out garbage (skb not allocated)
@ -1821,15 +1821,15 @@ rate) {
/*
* This is a rough attempt to TX a frame
* This is called by the ieee 80211 stack to TX management frames.
* If the ring is full packet are dropped (for data frame the queue
* If the ring is full packets are dropped (for data frame the queue
* is stopped before this can happen). For this reason it is better
* if the descriptors are larger than the largest management frame
* we intend to TX: i'm unsure what the HW does if it will not found
* we intend to TX: i'm unsure what the HW does if it will not find
* the last fragment of a frame because it has been dropped...
* Since queues for Management and Data frames are different we
* might use a different lock than tx_lock (for example mgmt_tx_lock)
*/
/* these function may loops if invoked with 0 descriptors or 0 len buffer */
/* these function may loop if invoked with 0 descriptors or 0 len buffer */
int rtl8180_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
@ -2378,7 +2378,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
u8 u1bAIFS;
u32 u4bAcParam;
pAcParam = (PAC_PARAM)(&AcParam);
/* Retrive paramters to udpate. */
/* Retrieve paramters to update. */
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit))<<AC_PARAM_TXOP_LIMIT_OFFSET)|
(((u32)(pAcParam->f.Ecw.f.ECWmax))<<AC_PARAM_ECW_MAX_OFFSET)|
@ -2414,7 +2414,7 @@ void rtl8180_wmm_param_update(struct work_struct *work)
u8 u1bAIFS;
u32 u4bAcParam;
/* Retrive paramters to udpate. */
/* Retrieve paramters to update. */
eACI = pAcParam->f.AciAifsn.f.ACI;
/* Mode G/A: slotTimeTimer = 9; Mode B: 20 */
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * (((mode&IEEE_G) == IEEE_G) ? 9 : 20) + aSifsTime;
@ -2700,7 +2700,7 @@ short rtl8180_init(struct net_device *dev)
priv->bTxPowerTrack = false;
priv->ThermalMeter = 0;
priv->FalseAlarmRegValue = 0;
priv->RegDigOfdmFaUpTh = 0xc; /* Upper threhold of OFDM false alarm, which is used in DIG. */
priv->RegDigOfdmFaUpTh = 0xc; /* Upper threshold of OFDM false alarm, which is used in DIG. */
priv->DIG_NumberFallbackVote = 0;
priv->DIG_NumberUpgradeVote = 0;
priv->LastSignalStrengthInPercent = 0;
@ -2896,7 +2896,7 @@ short rtl8180_init(struct net_device *dev)
priv->chtxpwr_ofdm[i+1] = (word & 0xff00) >> 8;
}
/* 3Read crystal calibtration and thermal meter indication on 87SE. */
/* 3Read crystal calibration and thermal meter indication on 87SE. */
eeprom_93cx6_read(&eeprom, EEPROM_RSV>>1, &tmpu16);
/* Crystal calibration for Xin and Xout resp. */
@ -3140,7 +3140,7 @@ void rtl8180_adapter_start(struct net_device *dev)
/*
* The following is very strange. seems to be that 1 means test mode,
* but we need to acknolwledges the nic when a packet is ready
* but we need to acknowledges the nic when a packet is ready
* although we set it to 0
*/
@ -3971,7 +3971,7 @@ irqreturn_t rtl8180_interrupt(int irq, void *netdev, struct pt_regs *regs)
}
if (inta == 0xffff) {
/* HW disappared */
/* HW disappeared */
spin_unlock_irqrestore(&priv->irq_th_lock, flags);
return IRQ_HANDLED;
}

16
drivers/staging/rtl8187se/r8180_dm.c
View File

@ -2,7 +2,7 @@
#include "r8180_hw.h"
#include "r8180_93cx6.h"
/* Return TRUE if we shall perform High Power Mecahnism, FALSE otherwise. */
/* Return TRUE if we shall perform High Power Mechanism, FALSE otherwise. */
#define RATE_ADAPTIVE_TIMER_PERIOD 300
bool CheckHighPower(struct net_device *dev)
@ -105,7 +105,7 @@ void rtl8180_tx_pw_wq(struct work_struct *work)
/*
* Return TRUE if we shall perform DIG Mecahnism, FALSE otherwise.
* Return TRUE if we shall perform DIG Mechanism, FALSE otherwise.
*/
bool CheckDig(struct net_device *dev)
{
@ -507,7 +507,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
* and retry rate.
* (3) Remove all Initial Gain Updates over OFDM rate. To avoid the complicated
* situation, Initial Gain Update is upon on DIG mechanism except CCK rate.
* (4) Add the mehanism of trying to upgrade tx rate.
* (4) Add the mechanism of trying to upgrade tx rate.
* (5) Record the information of upping tx rate to avoid trying upping tx rate constantly.
*
*/
@ -528,7 +528,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
if (priv->bTryuping == true) {
/* 2 For Test Upgrading mechanism
* Note:
* Sometimes the throughput is upon on the capability bwtween the AP and NIC,
* Sometimes the throughput is upon on the capability between the AP and NIC,
* thus the low data rate does not improve the performance.
* We randomly upgrade the data rate and check if the retry rate is improved.
*/
@ -704,7 +704,7 @@ void StaRateAdaptive87SE(struct net_device *dev)
/*
* The difference in throughput between 48Mbps and 36Mbps is 8M.
* So, we must be carefully in this rate scale. Isaiah 2008-02-15.
* So, we must be careful in this rate scale. Isaiah 2008-02-15.
*/
if (((priv->CurrentOperaRate == 72) || (priv->CurrentOperaRate == 48) || (priv->CurrentOperaRate == 36)) &&
(priv->FailTxRateCount > 2))
@ -1009,7 +1009,7 @@ void SwAntennaDiversity(struct net_device *dev)
if (priv->AdCheckPeriod > priv->AdMaxCheckPeriod)
priv->AdCheckPeriod = priv->AdMaxCheckPeriod;
/* Wrong deceision => switch back. */
/* Wrong decision => switch back. */
SwitchAntenna(dev);
} else {
/* Rx Signal Strength is improved. */
@ -1057,7 +1057,7 @@ void SwAntennaDiversity(struct net_device *dev)
}
/*
* <Roger_Notes> We evaluate Rx signal strength ONLY when default antenna
* didn't changed by HW evaluation.
* didn't change by HW evaluation.
* 2008.02.27.
*
* [TRC Dell Lab] SignalStrength is inaccuracy. Isaiah 2008-03-05
@ -1098,7 +1098,7 @@ void SwAntennaDiversity(struct net_device *dev)
priv->AdAuxAntennaRxOkCnt = 0;
}
/* Return TRUE if we shall perform Tx Power Tracking Mecahnism, FALSE otherwise. */
/* Return TRUE if we shall perform Tx Power Tracking Mechanism, FALSE otherwise. */
bool CheckTxPwrTracking(struct net_device *dev)
{
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);

4
drivers/staging/rtl8187se/r8180_rtl8225z2.c
View File

@ -190,7 +190,7 @@ static void rtl8225_SetTXPowerLevel(struct net_device *dev, short ch)
write_phy_cck(dev, 0x44 + i, power);
}
/* FIXME Is this delay really needeed ? */
/* FIXME Is this delay really needed ? */
force_pci_posting(dev);
mdelay(1);
@ -479,7 +479,7 @@ s8 DbmToTxPwrIdx(struct r8180_priv *priv, WIRELESS_MODE WirelessMode,
/*
* TRUE if we want to use a default implementation.
* We shall set it to FALSE when we have exact translation formular
* We shall set it to FALSE when we have exact translation formula
* for target IC. 070622, by rcnjko.
*/
if (bUseDefault) {

6
drivers/staging/rtl8187se/r8180_wx.c
View File

@ -13,7 +13,7 @@
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver.
We want to tanks the Authors of those projects and the Ndiswrapper
We want to thanks the Authors of those projects and the Ndiswrapper
project Authors.
*/
@ -1181,7 +1181,7 @@ static iw_handler r8180_wx_handlers[] = {
r8180_wx_set_wap, /* SIOCSIWAP */
r8180_wx_get_wap, /* SIOCGIWAP */
r8180_wx_set_mlme, /* SIOCSIWMLME*/
dummy, /* SIOCGIWAPLIST -- depricated */
dummy, /* SIOCGIWAPLIST -- deprecated */
r8180_wx_set_scan, /* SIOCSIWSCAN */
r8180_wx_get_scan, /* SIOCGIWSCAN */
r8180_wx_set_essid, /* SIOCSIWESSID */
@ -1369,7 +1369,7 @@ static inline int is_same_network(struct ieee80211_network *src,
(dst->capability & WLAN_CAPABILITY_BSS)));
}
/* WB modefied to show signal to GUI on 18-01-2008 */
/* WB modified to show signal to GUI on 18-01-2008 */
static struct iw_statistics *r8180_get_wireless_stats(struct net_device *dev)
{
struct r8180_priv *priv = ieee80211_priv(dev);

2
drivers/staging/rtl8187se/r8180_wx.h
View File

@ -7,7 +7,7 @@
Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon
Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver
We want to tanks the Authors of such projects and the Ndiswrapper project Authors.
We want to thanks the Authors of such projects and the Ndiswrapper project Authors.
*/
/* this file (will) contains wireless extension handlers*/

10
drivers/staging/rtl8187se/r8185b_init.c
View File

@ -1008,7 +1008,7 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
u8 u1bAIFS;
u32 u4bAcParam;
/* Retrive paramters to udpate. */
/* Retrieve paramters to update. */
eACI = pAcParam->f.AciAifsn.f.ACI;
u1bAIFS = pAcParam->f.AciAifsn.f.AIFSN * ChnlAccessSetting->SlotTimeTimer + aSifsTime;
u4bAcParam = ((((u32)(pAcParam->f.TXOPLimit)) << AC_PARAM_TXOP_LIMIT_OFFSET) |
@ -1104,7 +1104,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
return;
}
/* 1. Assign wireless mode to swtich if necessary. */
/* 1. Assign wireless mode to switch if necessary. */
if (btWirelessMode == WIRELESS_MODE_AUTO) {
if ((btSupportedWirelessMode & WIRELESS_MODE_A)) {
btWirelessMode = WIRELESS_MODE_A;
@ -1124,7 +1124,7 @@ void ActSetWirelessMode8185(struct net_device *dev, u8 btWirelessMode)
* 2. Swtich band: RF or BB specific actions,
* for example, refresh tables in omc8255, or change initial gain if necessary.
* Nothing to do for Zebra to switch band.
* Update current wireless mode if we swtich to specified band successfully.
* Update current wireless mode if we switch to specified band successfully.
*/
ieee->mode = (WIRELESS_MODE)btWirelessMode;
@ -1242,7 +1242,7 @@ bool MgntDisconnect(struct net_device *dev, u8 asRsn)
*/
MgntDisconnectAP(dev, asRsn);
}
/* Inidicate Disconnect, 2005.02.23, by rcnjko. */
/* Indicate Disconnect, 2005.02.23, by rcnjko. */
}
return true;
}
@ -1416,7 +1416,7 @@ void IPSEnter(struct net_device *dev)
* Do not enter IPS in the following conditions:
* (1) RF is already OFF or Sleep
* (2) bSwRfProcessing (indicates the IPS is still under going)
* (3) Connectted (only disconnected can trigger IPS)
* (3) Connected (only disconnected can trigger IPS)
* (4) IBSS (send Beacon)
* (5) AP mode (send Beacon)
*/