diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index 9272c38dd3c..16a2847b7cd 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -812,8 +812,10 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - kunmap(intel_private.i8xx_page); - intel_private.i8xx_flush_page = NULL; + if (intel_private.i8xx_flush_page) { + kunmap(intel_private.i8xx_flush_page); + intel_private.i8xx_flush_page = NULL; + } __free_page(intel_private.i8xx_page); intel_private.i8xx_page = NULL; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 7a26f4dd21a..e6800819bca 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -767,6 +767,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_HAS_BLT: value = HAS_BLT(dev); break; + case I915_PARAM_HAS_COHERENT_RINGS: + value = 1; + break; default: DRM_DEBUG_DRIVER("Unknown parameter %d\n", param->param); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 5e54821af99..275ec6ed43a 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -4374,10 +4374,20 @@ i915_gem_busy_ioctl(struct drm_device *dev, void *data, * use this buffer rather sooner than later, so issuing the required * flush earlier is beneficial. */ - if (obj->write_domain & I915_GEM_GPU_DOMAINS) + if (obj->write_domain & I915_GEM_GPU_DOMAINS) { i915_gem_flush_ring(dev, file_priv, obj_priv->ring, 0, obj->write_domain); + } else if (obj_priv->ring->outstanding_lazy_request) { + /* This ring is not being cleared by active usage, + * so emit a request to do so. + */ + u32 seqno = i915_add_request(dev, + NULL, NULL, + obj_priv->ring); + if (seqno == 0) + ret = -ENOMEM; + } /* Update the active list for the hardware's current position. * Otherwise this only updates on a delayed timer or when irqs diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 25ed911a311..878fc766a12 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3033,6 +3033,7 @@ #define TRANS_DP_10BPC (1<<9) #define TRANS_DP_6BPC (2<<9) #define TRANS_DP_12BPC (3<<9) +#define TRANS_DP_BPC_MASK (3<<9) #define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) #define TRANS_DP_VSYNC_ACTIVE_LOW 0 #define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 255b52ee009..d9b7092439e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2120,9 +2120,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_PORT_SEL_MASK | - TRANS_DP_SYNC_MASK); + TRANS_DP_SYNC_MASK | + TRANS_DP_BPC_MASK); temp |= (TRANS_DP_OUTPUT_ENABLE | TRANS_DP_ENH_FRAMING); + temp |= TRANS_DP_8BPC; if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DP_HSYNC_ACTIVE_HIGH; @@ -2712,27 +2714,19 @@ fdi_reduce_ratio(u32 *num, u32 *den) } } -#define DATA_N 0x800000 -#define LINK_N 0x80000 - static void ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock, int link_clock, struct fdi_m_n *m_n) { - u64 temp; - m_n->tu = 64; /* default size */ - temp = (u64) DATA_N * pixel_clock; - temp = div_u64(temp, link_clock); - m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes); - m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */ - m_n->gmch_n = DATA_N; + /* BUG_ON(pixel_clock > INT_MAX / 36); */ + m_n->gmch_m = bits_per_pixel * pixel_clock; + m_n->gmch_n = link_clock * nlanes * 8; fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); - temp = (u64) LINK_N * pixel_clock; - m_n->link_m = div_u64(temp, link_clock); - m_n->link_n = LINK_N; + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; fdi_reduce_ratio(&m_n->link_m, &m_n->link_n); } @@ -3716,6 +3710,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* FDI link */ if (HAS_PCH_SPLIT(dev)) { + int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int lane = 0, link_bw, bpp; /* CPU eDP doesn't require FDI link, so just set DP M/N according to current link config */ @@ -3799,6 +3794,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->fdi_lanes = lane; + if (pixel_multiplier > 1) + link_bw *= pixel_multiplier; ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n); } @@ -5236,6 +5233,55 @@ static const struct drm_crtc_funcs intel_crtc_funcs = { .page_flip = intel_crtc_page_flip, }; +static void intel_sanitize_modesetting(struct drm_device *dev, + int pipe, int plane) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 reg, val; + + if (HAS_PCH_SPLIT(dev)) + return; + + /* Who knows what state these registers were left in by the BIOS or + * grub? + * + * If we leave the registers in a conflicting state (e.g. with the + * display plane reading from the other pipe than the one we intend + * to use) then when we attempt to teardown the active mode, we will + * not disable the pipes and planes in the correct order -- leaving + * a plane reading from a disabled pipe and possibly leading to + * undefined behaviour. + */ + + reg = DSPCNTR(plane); + val = I915_READ(reg); + + if ((val & DISPLAY_PLANE_ENABLE) == 0) + return; + if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe) + return; + + /* This display plane is active and attached to the other CPU pipe. */ + pipe = !pipe; + + /* Disable the plane and wait for it to stop reading from the pipe. */ + I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); + intel_flush_display_plane(dev, plane); + + if (IS_GEN2(dev)) + intel_wait_for_vblank(dev, pipe); + + if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + /* Switch off the pipe. */ + reg = PIPECONF(pipe); + val = I915_READ(reg); + if (val & PIPECONF_ENABLE) { + I915_WRITE(reg, val & ~PIPECONF_ENABLE); + intel_wait_for_pipe_off(dev, pipe); + } +} static void intel_crtc_init(struct drm_device *dev, int pipe) { @@ -5287,6 +5333,8 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer, (unsigned long)intel_crtc); + + intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane); } int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data, diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 300f64b4238..df648cb4c29 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1376,6 +1376,9 @@ intel_dp_link_down(struct intel_dp *intel_dp) struct drm_i915_private *dev_priv = dev->dev_private; uint32_t DP = intel_dp->DP; + if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + DRM_DEBUG_KMS("\n"); if (is_edp(intel_dp)) { @@ -1398,6 +1401,28 @@ intel_dp_link_down(struct intel_dp *intel_dp) if (is_edp(intel_dp)) DP |= DP_LINK_TRAIN_OFF; + + if (!HAS_PCH_CPT(dev) && + I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) { + struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc); + /* Hardware workaround: leaving our transcoder select + * set to transcoder B while it's off will prevent the + * corresponding HDMI output on transcoder A. + * + * Combine this with another hardware workaround: + * transcoder select bit can only be cleared while the + * port is enabled. + */ + DP &= ~DP_PIPEB_SELECT; + I915_WRITE(intel_dp->output_reg, DP); + + /* Changes to enable or select take place the vblank + * after being written. + */ + intel_wait_for_vblank(intel_dp->base.base.dev, + intel_crtc->pipe); + } + I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); POSTING_READ(intel_dp->output_reg); } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index f79327fc665..25bcedf386f 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -68,7 +68,7 @@ static struct intel_lvds *intel_attached_lvds(struct drm_connector *connector) /** * Sets the power state for the panel. */ -static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) +static void intel_lvds_enable(struct intel_lvds *intel_lvds) { struct drm_device *dev = intel_lvds->base.base.dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -82,26 +82,61 @@ static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on) lvds_reg = LVDS; } - if (on) { - I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); - intel_panel_set_backlight(dev, dev_priv->backlight_level); - } else { - dev_priv->backlight_level = intel_panel_get_backlight(dev); + I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN); - intel_panel_set_backlight(dev, 0); - I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); - - if (intel_lvds->pfit_control) { - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - I915_WRITE(PFIT_CONTROL, 0); - intel_lvds->pfit_control = 0; + if (intel_lvds->pfit_dirty) { + /* + * Enable automatic panel scaling so that non-native modes + * fill the screen. The panel fitter should only be + * adjusted whilst the pipe is disabled, according to + * register description and PRM. + */ + DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", + intel_lvds->pfit_control, + intel_lvds->pfit_pgm_ratios); + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) { + DRM_ERROR("timed out waiting for panel to power off\n"); + } else { + I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); + I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); intel_lvds->pfit_dirty = false; } - - I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); } + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON); + POSTING_READ(lvds_reg); + + intel_panel_set_backlight(dev, dev_priv->backlight_level); +} + +static void intel_lvds_disable(struct intel_lvds *intel_lvds) +{ + struct drm_device *dev = intel_lvds->base.base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + u32 ctl_reg, lvds_reg; + + if (HAS_PCH_SPLIT(dev)) { + ctl_reg = PCH_PP_CONTROL; + lvds_reg = PCH_LVDS; + } else { + ctl_reg = PP_CONTROL; + lvds_reg = LVDS; + } + + dev_priv->backlight_level = intel_panel_get_backlight(dev); + intel_panel_set_backlight(dev, 0); + + I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON); + + if (intel_lvds->pfit_control) { + if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) + DRM_ERROR("timed out waiting for panel to power off\n"); + + I915_WRITE(PFIT_CONTROL, 0); + intel_lvds->pfit_dirty = true; + } + + I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN); POSTING_READ(lvds_reg); } @@ -110,9 +145,9 @@ static void intel_lvds_dpms(struct drm_encoder *encoder, int mode) struct intel_lvds *intel_lvds = to_intel_lvds(encoder); if (mode == DRM_MODE_DPMS_ON) - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); else - intel_lvds_set_power(intel_lvds, false); + intel_lvds_disable(intel_lvds); /* XXX: We never power down the LVDS pairs. */ } @@ -411,43 +446,18 @@ static void intel_lvds_commit(struct drm_encoder *encoder) /* Always do a full power on as we do not know what state * we were left in. */ - intel_lvds_set_power(intel_lvds, true); + intel_lvds_enable(intel_lvds); } static void intel_lvds_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { - struct drm_device *dev = encoder->dev; - struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_lvds *intel_lvds = to_intel_lvds(encoder); - /* * The LVDS pin pair will already have been turned on in the * intel_crtc_mode_set since it has a large impact on the DPLL * settings. */ - - if (HAS_PCH_SPLIT(dev)) - return; - - if (!intel_lvds->pfit_dirty) - return; - - /* - * Enable automatic panel scaling so that non-native modes fill the - * screen. Should be enabled before the pipe is enabled, according to - * register description and PRM. - */ - DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n", - intel_lvds->pfit_control, - intel_lvds->pfit_pgm_ratios); - if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) - DRM_ERROR("timed out waiting for panel to power off\n"); - - I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios); - I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control); - intel_lvds->pfit_dirty = false; } /** diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index b83306f9244..89a65be8a3f 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -156,23 +156,25 @@ static int init_ring_common(struct drm_device *dev, /* G45 ring initialization fails to reset head to zero */ if (head != 0) { - DRM_ERROR("%s head not reset to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + DRM_DEBUG_KMS("%s head not reset to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); I915_WRITE_HEAD(ring, 0); - DRM_ERROR("%s head forced to zero " - "ctl %08x head %08x tail %08x start %08x\n", - ring->name, - I915_READ_CTL(ring), - I915_READ_HEAD(ring), - I915_READ_TAIL(ring), - I915_READ_START(ring)); + if (I915_READ_HEAD(ring) & HEAD_ADDR) { + DRM_ERROR("failed to set %s head to zero " + "ctl %08x head %08x tail %08x start %08x\n", + ring->name, + I915_READ_CTL(ring), + I915_READ_HEAD(ring), + I915_READ_TAIL(ring), + I915_READ_START(ring)); + } } I915_WRITE_CTL(ring, diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h index 8c641bed9bb..a2776e2807a 100644 --- a/include/drm/i915_drm.h +++ b/include/drm/i915_drm.h @@ -287,6 +287,8 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_EXECBUF2 9 #define I915_PARAM_HAS_BSD 10 #define I915_PARAM_HAS_BLT 11 +#define I915_PARAM_HAS_RELAXED_FENCING 12 +#define I915_PARAM_HAS_COHERENT_RINGS 13 typedef struct drm_i915_getparam { int param;