Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (185 commits) powerpc: fix compile error with 85xx/p1010rdb.c powerpc: fix compile error with 85xx/p1023_rds.c powerpc/fsl: add MSI support for the Freescale hypervisor arch/powerpc/sysdev/fsl_rmu.c: introduce missing kfree powerpc/fsl: Add support for Integrated Flash Controller powerpc/fsl: update compatiable on fsl 16550 uart nodes powerpc/85xx: fix PCI and localbus properties in p1022ds.dts powerpc/85xx: re-enable ePAPR byte channel driver in corenet32_smp_defconfig powerpc/fsl: Update defconfigs to enable some standard FSL HW features powerpc: Add TBI PHY node to first MDIO bus sbc834x: put full compat string in board match check powerpc/fsl-pci: Allow 64-bit PCIe devices to DMA to any memory address powerpc: Fix unpaired probe_hcall_entry and probe_hcall_exit offb: Fix setting of the pseudo-palette for >8bpp offb: Add palette hack for qemu "standard vga" framebuffer offb: Fix bug in calculating requested vram size powerpc/boot: Change the WARN to INFO for boot wrapper overlap message powerpc/44x: Fix build error on currituck platform powerpc/boot: Change the load address for the wrapper to fit the kernel powerpc/44x: Enable CRASH_DUMP for 440x ... Fix up a trivial conflict in arch/powerpc/include/asm/cputime.h due to the additional sparse-checking code for cputime_t.
This commit is contained in:
Linus Torvalds
commit
e4e88f31bc
|
|
@ -0,0 +1,163 @@
|
|||
Message unit node:
|
||||
|
||||
For SRIO controllers that implement the message unit as part of the controller
|
||||
this node is required. For devices with RMAN this node should NOT exist. The
|
||||
node is composed of three types of sub-nodes ("fsl-srio-msg-unit",
|
||||
"fsl-srio-dbell-unit" and "fsl-srio-port-write-unit").
|
||||
|
||||
See srio.txt for more details about generic SRIO controller details.
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include "fsl,srio-rmu-vX.Y", "fsl,srio-rmu".
|
||||
|
||||
The version X.Y should match the general SRIO controller's IP Block
|
||||
revision register's Major(X) and Minor (Y) value.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the physical address and
|
||||
length of the SRIO configuration registers for message units
|
||||
and doorbell units.
|
||||
|
||||
- fsl,liodn
|
||||
Usage: optional-but-recommended (for devices with PAMU)
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: The logical I/O device number for the PAMU (IOMMU) to be
|
||||
correctly configured for SRIO accesses. The property should
|
||||
not exist on devices that do not support PAMU.
|
||||
|
||||
The LIODN value is associated with all RMU transactions
|
||||
(msg-unit, doorbell, port-write).
|
||||
|
||||
Sub-Nodes for RMU: The RMU node is composed of multiple sub-nodes that
|
||||
correspond to the actual sub-controllers in the RMU. The manual for a given
|
||||
SoC will detail which and how many of these sub-controllers are implemented.
|
||||
|
||||
Message Unit:
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include "fsl,srio-msg-unit-vX.Y", "fsl,srio-msg-unit".
|
||||
|
||||
The version X.Y should match the general SRIO controller's IP Block
|
||||
revision register's Major(X) and Minor (Y) value.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the physical address and
|
||||
length of the SRIO configuration registers for message units
|
||||
and doorbell units.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop_encoded-array>
|
||||
Definition: Specifies the interrupts generated by this device. The
|
||||
value of the interrupts property consists of one interrupt
|
||||
specifier. The format of the specifier is defined by the
|
||||
binding document describing the node's interrupt parent.
|
||||
|
||||
A pair of IRQs are specified in this property. The first
|
||||
element is associated with the transmit (TX) interrupt and the
|
||||
second element is associated with the receive (RX) interrupt.
|
||||
|
||||
Doorbell Unit:
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include:
|
||||
"fsl,srio-dbell-unit-vX.Y", "fsl,srio-dbell-unit"
|
||||
|
||||
The version X.Y should match the general SRIO controller's IP Block
|
||||
revision register's Major(X) and Minor (Y) value.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the physical address and
|
||||
length of the SRIO configuration registers for message units
|
||||
and doorbell units.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop_encoded-array>
|
||||
Definition: Specifies the interrupts generated by this device. The
|
||||
value of the interrupts property consists of one interrupt
|
||||
specifier. The format of the specifier is defined by the
|
||||
binding document describing the node's interrupt parent.
|
||||
|
||||
A pair of IRQs are specified in this property. The first
|
||||
element is associated with the transmit (TX) interrupt and the
|
||||
second element is associated with the receive (RX) interrupt.
|
||||
|
||||
Port-Write Unit:
|
||||
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include:
|
||||
"fsl,srio-port-write-unit-vX.Y", "fsl,srio-port-write-unit"
|
||||
|
||||
The version X.Y should match the general SRIO controller's IP Block
|
||||
revision register's Major(X) and Minor (Y) value.
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the physical address and
|
||||
length of the SRIO configuration registers for message units
|
||||
and doorbell units.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop_encoded-array>
|
||||
Definition: Specifies the interrupts generated by this device. The
|
||||
value of the interrupts property consists of one interrupt
|
||||
specifier. The format of the specifier is defined by the
|
||||
binding document describing the node's interrupt parent.
|
||||
|
||||
A single IRQ that handles port-write conditions is
|
||||
specified by this property. (Typically shared with error).
|
||||
|
||||
Note: All other standard properties (see the ePAPR) are allowed
|
||||
but are optional.
|
||||
|
||||
Example:
|
||||
rmu: rmu@d3000 {
|
||||
compatible = "fsl,srio-rmu";
|
||||
reg = <0xd3000 0x400>;
|
||||
ranges = <0x0 0xd3000 0x400>;
|
||||
fsl,liodn = <0xc8>;
|
||||
|
||||
message-unit@0 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x0 0x100>;
|
||||
interrupts = <
|
||||
60 2 0 0 /* msg1_tx_irq */
|
||||
61 2 0 0>;/* msg1_rx_irq */
|
||||
};
|
||||
message-unit@100 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x100 0x100>;
|
||||
interrupts = <
|
||||
62 2 0 0 /* msg2_tx_irq */
|
||||
63 2 0 0>;/* msg2_rx_irq */
|
||||
};
|
||||
doorbell-unit@400 {
|
||||
compatible = "fsl,srio-dbell-unit";
|
||||
reg = <0x400 0x80>;
|
||||
interrupts = <
|
||||
56 2 0 0 /* bell_outb_irq */
|
||||
57 2 0 0>;/* bell_inb_irq */
|
||||
};
|
||||
port-write-unit@4e0 {
|
||||
compatible = "fsl,srio-port-write-unit";
|
||||
reg = <0x4e0 0x20>;
|
||||
interrupts = <16 2 1 11>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,103 @@
|
|||
* Freescale Serial RapidIO (SRIO) Controller
|
||||
|
||||
RapidIO port node:
|
||||
Properties:
|
||||
- compatible
|
||||
Usage: required
|
||||
Value type: <string>
|
||||
Definition: Must include "fsl,srio" for IP blocks with IP Block
|
||||
Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
|
||||
|
||||
Optionally, a compatiable string of "fsl,srio-vX.Y" where X is Major
|
||||
version in IP Block Revision Register and Y is Minor version. If this
|
||||
compatiable is provided it should be ordered before "fsl,srio".
|
||||
|
||||
- reg
|
||||
Usage: required
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Specifies the physical address and
|
||||
length of the SRIO configuration registers. The size should
|
||||
be set to 0x11000.
|
||||
|
||||
- interrupts
|
||||
Usage: required
|
||||
Value type: <prop_encoded-array>
|
||||
Definition: Specifies the interrupts generated by this device. The
|
||||
value of the interrupts property consists of one interrupt
|
||||
specifier. The format of the specifier is defined by the
|
||||
binding document describing the node's interrupt parent.
|
||||
|
||||
A single IRQ that handles error conditions is specified by this
|
||||
property. (Typically shared with port-write).
|
||||
|
||||
- fsl,srio-rmu-handle:
|
||||
Usage: required if rmu node is defined
|
||||
Value type: <phandle>
|
||||
Definition: A single <phandle> value that points to the RMU.
|
||||
(See srio-rmu.txt for more details on RMU node binding)
|
||||
|
||||
Port Child Nodes: There should a port child node for each port that exists in
|
||||
the controller. The ports are numbered starting at one (1) and should have
|
||||
the following properties:
|
||||
|
||||
- cell-index
|
||||
Usage: required
|
||||
Value type: <u32>
|
||||
Definition: A standard property. Matches the port id.
|
||||
|
||||
- ranges
|
||||
Usage: required if local access windows preset
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: A standard property. Utilized to describe the memory mapped
|
||||
IO space utilized by the controller. This corresponds to the
|
||||
setting of the local access windows that are targeted to this
|
||||
SRIO port.
|
||||
|
||||
- fsl,liodn
|
||||
Usage: optional-but-recommended (for devices with PAMU)
|
||||
Value type: <prop-encoded-array>
|
||||
Definition: The logical I/O device number for the PAMU (IOMMU) to be
|
||||
correctly configured for SRIO accesses. The property should
|
||||
not exist on devices that do not support PAMU.
|
||||
|
||||
For HW (ie, the P4080) that only supports a LIODN for both
|
||||
memory and maintenance transactions then a single LIODN is
|
||||
represented in the property for both transactions.
|
||||
|
||||
For HW (ie, the P304x/P5020, etc) that supports an LIODN for
|
||||
memory transactions and a unique LIODN for maintenance
|
||||
transactions then a pair of LIODNs are represented in the
|
||||
property. Within the pair, the first element represents the
|
||||
LIODN associated with memory transactions and the second element
|
||||
represents the LIODN associated with maintenance transactions
|
||||
for the port.
|
||||
|
||||
Note: All other standard properties (see ePAPR) are allowed but are optional.
|
||||
|
||||
Example:
|
||||
|
||||
rapidio: rapidio@ffe0c0000 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
reg = <0xf 0xfe0c0000 0 0x11000>;
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>; /* err_irq */
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
cell-index = <1>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,liodn = <34>;
|
||||
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
cell-index = <2>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,liodn = <48>;
|
||||
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -4011,7 +4011,7 @@ M: Josh Boyer <jwboyer@gmail.com>
|
|||
M: Matt Porter <mporter@kernel.crashing.org>
|
||||
W: http://www.penguinppc.org/
|
||||
L: linuxppc-dev@lists.ozlabs.org
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
|
||||
T: git git://git.infradead.org/users/jwboyer/powerpc-4xx.git
|
||||
S: Maintained
|
||||
F: arch/powerpc/platforms/40x/
|
||||
F: arch/powerpc/platforms/44x/
|
||||
|
|
|
|||
|
|
@ -87,6 +87,10 @@ config ARCH_HAS_ILOG2_U64
|
|||
bool
|
||||
default y if 64BIT
|
||||
|
||||
config ARCH_HAS_CPU_IDLE_WAIT
|
||||
bool
|
||||
default y
|
||||
|
||||
config GENERIC_HWEIGHT
|
||||
bool
|
||||
default y
|
||||
|
|
@ -133,6 +137,7 @@ config PPC
|
|||
select IRQ_PER_CPU
|
||||
select GENERIC_IRQ_SHOW
|
||||
select GENERIC_IRQ_SHOW_LEVEL
|
||||
select IRQ_FORCED_THREADING
|
||||
select HAVE_RCU_TABLE_FREE if SMP
|
||||
select HAVE_SYSCALL_TRACEPOINTS
|
||||
select HAVE_BPF_JIT if (PPC64 && NET)
|
||||
|
|
@ -363,8 +368,9 @@ config KEXEC
|
|||
|
||||
config CRASH_DUMP
|
||||
bool "Build a kdump crash kernel"
|
||||
depends on PPC64 || 6xx || FSL_BOOKE
|
||||
select RELOCATABLE if PPC64 || FSL_BOOKE
|
||||
depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP && !PPC_47x)
|
||||
select RELOCATABLE if PPC64 || 44x
|
||||
select DYNAMIC_MEMSTART if FSL_BOOKE
|
||||
help
|
||||
Build a kernel suitable for use as a kdump capture kernel.
|
||||
The same kernel binary can be used as production kernel and dump
|
||||
|
|
@ -685,6 +691,10 @@ config FSL_LBC
|
|||
controller. Also contains some common code used by
|
||||
drivers for specific local bus peripherals.
|
||||
|
||||
config FSL_IFC
|
||||
bool
|
||||
depends on FSL_SOC
|
||||
|
||||
config FSL_GTM
|
||||
bool
|
||||
depends on PPC_83xx || QUICC_ENGINE || CPM2
|
||||
|
|
@ -770,6 +780,10 @@ source "drivers/rapidio/Kconfig"
|
|||
|
||||
endmenu
|
||||
|
||||
config NONSTATIC_KERNEL
|
||||
bool
|
||||
default n
|
||||
|
||||
menu "Advanced setup"
|
||||
depends on PPC32
|
||||
|
||||
|
|
@ -819,13 +833,32 @@ config LOWMEM_CAM_NUM
|
|||
int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
|
||||
default 3
|
||||
|
||||
config DYNAMIC_MEMSTART
|
||||
bool "Enable page aligned dynamic load address for kernel (EXPERIMENTAL)"
|
||||
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || 44x)
|
||||
select NONSTATIC_KERNEL
|
||||
help
|
||||
This option enables the kernel to be loaded at any page aligned
|
||||
physical address. The kernel creates a mapping from KERNELBASE to
|
||||
the address where the kernel is loaded. The page size here implies
|
||||
the TLB page size of the mapping for kernel on the particular platform.
|
||||
Please refer to the init code for finding the TLB page size.
|
||||
|
||||
DYNAMIC_MEMSTART is an easy way of implementing pseudo-RELOCATABLE
|
||||
kernel image, where the only restriction is the page aligned kernel
|
||||
load address. When this option is enabled, the compile time physical
|
||||
address CONFIG_PHYSICAL_START is ignored.
|
||||
|
||||
This option is overridden by CONFIG_RELOCATABLE
|
||||
|
||||
config RELOCATABLE
|
||||
bool "Build a relocatable kernel (EXPERIMENTAL)"
|
||||
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && (FSL_BOOKE || PPC_47x)
|
||||
depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && 44x
|
||||
select NONSTATIC_KERNEL
|
||||
help
|
||||
This builds a kernel image that is capable of running at the
|
||||
location the kernel is loaded at (some alignment restrictions may
|
||||
exist).
|
||||
location the kernel is loaded at, without any alignment restrictions.
|
||||
This feature is a superset of DYNAMIC_MEMSTART and hence overrides it.
|
||||
|
||||
One use is for the kexec on panic case where the recovery kernel
|
||||
must live at a different physical address than the primary
|
||||
|
|
@ -835,7 +868,11 @@ config RELOCATABLE
|
|||
it has been loaded at and the compile time physical addresses
|
||||
CONFIG_PHYSICAL_START is ignored. However CONFIG_PHYSICAL_START
|
||||
setting can still be useful to bootwrappers that need to know the
|
||||
load location of the kernel (eg. u-boot/mkimage).
|
||||
load address of the kernel (eg. u-boot/mkimage).
|
||||
|
||||
config RELOCATABLE_PPC32
|
||||
def_bool y
|
||||
depends on PPC32 && RELOCATABLE
|
||||
|
||||
config PAGE_OFFSET_BOOL
|
||||
bool "Set custom page offset address"
|
||||
|
|
@ -865,7 +902,7 @@ config KERNEL_START_BOOL
|
|||
config KERNEL_START
|
||||
hex "Virtual address of kernel base" if KERNEL_START_BOOL
|
||||
default PAGE_OFFSET if PAGE_OFFSET_BOOL
|
||||
default "0xc2000000" if CRASH_DUMP && !RELOCATABLE
|
||||
default "0xc2000000" if CRASH_DUMP && !NONSTATIC_KERNEL
|
||||
default "0xc0000000"
|
||||
|
||||
config PHYSICAL_START_BOOL
|
||||
|
|
@ -878,7 +915,7 @@ config PHYSICAL_START_BOOL
|
|||
|
||||
config PHYSICAL_START
|
||||
hex "Physical address where the kernel is loaded" if PHYSICAL_START_BOOL
|
||||
default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !RELOCATABLE
|
||||
default "0x02000000" if PPC_STD_MMU && CRASH_DUMP && !NONSTATIC_KERNEL
|
||||
default "0x00000000"
|
||||
|
||||
config PHYSICAL_ALIGN
|
||||
|
|
@ -924,6 +961,7 @@ endmenu
|
|||
if PPC64
|
||||
config RELOCATABLE
|
||||
bool "Build a relocatable kernel"
|
||||
select NONSTATIC_KERNEL
|
||||
help
|
||||
This builds a kernel image that is capable of running anywhere
|
||||
in the RMA (real memory area) at any 16k-aligned base address.
|
||||
|
|
|
|||
|
|
@ -336,4 +336,16 @@ config PPC_EARLY_DEBUG_CPM_ADDR
|
|||
platform probing is done, all platforms selected must
|
||||
share the same address.
|
||||
|
||||
config STRICT_DEVMEM
|
||||
def_bool y
|
||||
prompt "Filter access to /dev/mem"
|
||||
help
|
||||
This option restricts access to /dev/mem. If this option is
|
||||
disabled, you allow userspace access to all memory, including
|
||||
kernel and userspace memory. Accidental memory access is likely
|
||||
to be disastrous.
|
||||
Memory access is required for experts who want to debug the kernel.
|
||||
|
||||
If you are unsure, say Y.
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -63,9 +63,9 @@ override CC += -m$(CONFIG_WORD_SIZE)
|
|||
override AR := GNUTARGET=elf$(CONFIG_WORD_SIZE)-powerpc $(AR)
|
||||
endif
|
||||
|
||||
LDFLAGS_vmlinux-yy := -Bstatic
|
||||
LDFLAGS_vmlinux-$(CONFIG_PPC64)$(CONFIG_RELOCATABLE) := -pie
|
||||
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-yy)
|
||||
LDFLAGS_vmlinux-y := -Bstatic
|
||||
LDFLAGS_vmlinux-$(CONFIG_RELOCATABLE) := -pie
|
||||
LDFLAGS_vmlinux := $(LDFLAGS_vmlinux-y)
|
||||
|
||||
CFLAGS-$(CONFIG_PPC64) := -mminimal-toc -mtraceback=no -mcall-aixdesc
|
||||
CFLAGS-$(CONFIG_PPC32) := -ffixed-r2 -mmultiple
|
||||
|
|
@ -131,8 +131,7 @@ KBUILD_CFLAGS += -mno-sched-epilog
|
|||
endif
|
||||
|
||||
cpu-as-$(CONFIG_4xx) += -Wa,-m405
|
||||
cpu-as-$(CONFIG_6xx) += -Wa,-maltivec
|
||||
cpu-as-$(CONFIG_POWER4) += -Wa,-maltivec
|
||||
cpu-as-$(CONFIG_ALTIVEC) += -Wa,-maltivec
|
||||
cpu-as-$(CONFIG_E500) += -Wa,-me500
|
||||
cpu-as-$(CONFIG_E200) += -Wa,-me200
|
||||
|
||||
|
|
@ -166,7 +165,7 @@ all: zImage
|
|||
|
||||
# With make 3.82 we cannot mix normal and wildcard targets
|
||||
BOOT_TARGETS1 := zImage zImage.initrd uImage
|
||||
BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
|
||||
BOOT_TARGETS2 := zImage% dtbImage% treeImage.% cuImage.% simpleImage.% uImage.%
|
||||
|
||||
PHONY += $(BOOT_TARGETS1) $(BOOT_TARGETS2)
|
||||
|
||||
|
|
|
|||
|
|
@ -45,6 +45,7 @@ $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405
|
|||
$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405
|
||||
$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
|
||||
|
||||
|
||||
|
|
@ -79,7 +80,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
|
|||
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
|
||||
virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
|
||||
cuboot-acadia.c cuboot-amigaone.c cuboot-kilauea.c \
|
||||
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c
|
||||
gamecube-head.S gamecube.c wii-head.S wii.c treeboot-iss4xx.c \
|
||||
treeboot-currituck.c
|
||||
src-boot := $(src-wlib) $(src-plat) empty.c
|
||||
|
||||
src-boot := $(addprefix $(obj)/, $(src-boot))
|
||||
|
|
@ -199,6 +201,7 @@ image-$(CONFIG_EP405) += dtbImage.ep405
|
|||
image-$(CONFIG_HOTFOOT) += cuImage.hotfoot
|
||||
image-$(CONFIG_WALNUT) += treeImage.walnut
|
||||
image-$(CONFIG_ACADIA) += cuImage.acadia
|
||||
image-$(CONFIG_OBS600) += uImage.obs600
|
||||
|
||||
# Board ports in arch/powerpc/platform/44x/Kconfig
|
||||
image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
|
||||
|
|
@ -212,6 +215,7 @@ image-$(CONFIG_WARP) += cuImage.warp
|
|||
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
|
||||
image-$(CONFIG_ISS4xx) += treeImage.iss4xx \
|
||||
treeImage.iss4xx-mpic
|
||||
image-$(CONFIG_CURRITUCK) += treeImage.currituck
|
||||
|
||||
# Board ports in arch/powerpc/platform/8xx/Kconfig
|
||||
image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
|
||||
|
|
@ -316,6 +320,12 @@ $(obj)/zImage.iseries: vmlinux
|
|||
$(obj)/uImage: vmlinux $(wrapperbits)
|
||||
$(call if_changed,wrap,uboot)
|
||||
|
||||
$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
||||
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
||||
|
||||
$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
||||
$(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb)
|
||||
|
||||
$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits)
|
||||
$(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz)
|
||||
|
||||
|
|
|
|||
|
|
@ -9,6 +9,12 @@
|
|||
})
|
||||
#define mtdcr(rn, val) \
|
||||
asm volatile("mtdcr %0,%1" : : "i"(rn), "r"(val))
|
||||
#define mfdcrx(rn) \
|
||||
({ \
|
||||
unsigned long rval; \
|
||||
asm volatile("mfdcrx %0,%1" : "=r"(rval) : "r"(rn)); \
|
||||
rval; \
|
||||
})
|
||||
|
||||
/* 440GP/440GX SDRAM controller DCRs */
|
||||
#define DCRN_SDRAM0_CFGADDR 0x010
|
||||
|
|
|
|||
|
|
@ -57,3 +57,55 @@ __div64_32:
|
|||
stw r8,4(r3)
|
||||
mr r3,r6 # return the remainder in r3
|
||||
blr
|
||||
|
||||
/*
|
||||
* Extended precision shifts.
|
||||
*
|
||||
* Updated to be valid for shift counts from 0 to 63 inclusive.
|
||||
* -- Gabriel
|
||||
*
|
||||
* R3/R4 has 64 bit value
|
||||
* R5 has shift count
|
||||
* result in R3/R4
|
||||
*
|
||||
* ashrdi3: arithmetic right shift (sign propagation)
|
||||
* lshrdi3: logical right shift
|
||||
* ashldi3: left shift
|
||||
*/
|
||||
.globl __ashrdi3
|
||||
__ashrdi3:
|
||||
subfic r6,r5,32
|
||||
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
|
||||
addi r7,r5,32 # could be xori, or addi with -32
|
||||
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
|
||||
rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
|
||||
sraw r7,r3,r7 # t2 = MSW >> (count-32)
|
||||
or r4,r4,r6 # LSW |= t1
|
||||
slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
|
||||
sraw r3,r3,r5 # MSW = MSW >> count
|
||||
or r4,r4,r7 # LSW |= t2
|
||||
blr
|
||||
|
||||
.globl __ashldi3
|
||||
__ashldi3:
|
||||
subfic r6,r5,32
|
||||
slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
|
||||
addi r7,r5,32 # could be xori, or addi with -32
|
||||
srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
|
||||
slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
|
||||
or r3,r3,r6 # MSW |= t1
|
||||
slw r4,r4,r5 # LSW = LSW << count
|
||||
or r3,r3,r7 # MSW |= t2
|
||||
blr
|
||||
|
||||
.globl __lshrdi3
|
||||
__lshrdi3:
|
||||
subfic r6,r5,32
|
||||
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
|
||||
addi r7,r5,32 # could be xori, or addi with -32
|
||||
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
|
||||
srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
|
||||
or r4,r4,r6 # LSW |= t1
|
||||
srw r3,r3,r5 # MSW = MSW >> count
|
||||
or r4,r4,r7 # LSW |= t2
|
||||
blr
|
||||
|
|
|
|||
|
|
@ -256,7 +256,7 @@
|
|||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <400000000>;
|
||||
interrupts = <9 0x8>;
|
||||
|
|
@ -266,7 +266,7 @@
|
|||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <400000000>;
|
||||
interrupts = <10 0x8>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,237 @@
|
|||
/*
|
||||
* Device Tree Source for IBM Embedded PPC 476 Platform
|
||||
*
|
||||
* Copyright © 2011 Tony Breeds IBM Corporation
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public
|
||||
* License version 2. This program is licensed "as is" without
|
||||
* any warranty of any kind, whether express or implied.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/memreserve/ 0x01f00000 0x00100000; // spin table
|
||||
|
||||
/ {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
model = "ibm,currituck";
|
||||
compatible = "ibm,currituck";
|
||||
dcr-parent = <&{/cpus/cpu@0}>;
|
||||
|
||||
aliases {
|
||||
serial0 = &UART0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
model = "PowerPC,476";
|
||||
reg = <0>;
|
||||
clock-frequency = <1600000000>; // 1.6 GHz
|
||||
timebase-frequency = <100000000>; // 100Mhz
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-size = <32768>;
|
||||
d-cache-size = <32768>;
|
||||
dcr-controller;
|
||||
dcr-access-method = "native";
|
||||
status = "ok";
|
||||
};
|
||||
cpu@1 {
|
||||
device_type = "cpu";
|
||||
model = "PowerPC,476";
|
||||
reg = <1>;
|
||||
clock-frequency = <1600000000>; // 1.6 GHz
|
||||
timebase-frequency = <100000000>; // 100Mhz
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-size = <32768>;
|
||||
d-cache-size = <32768>;
|
||||
dcr-controller;
|
||||
dcr-access-method = "native";
|
||||
status = "disabled";
|
||||
enable-method = "spin-table";
|
||||
cpu-release-addr = <0x0 0x01f00000>;
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x0>; // filled in by zImage
|
||||
};
|
||||
|
||||
MPIC: interrupt-controller {
|
||||
compatible = "chrp,open-pic";
|
||||
interrupt-controller;
|
||||
dcr-reg = <0xffc00000 0x00040000>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
};
|
||||
|
||||
plb {
|
||||
compatible = "ibm,plb6";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
clock-frequency = <200000000>; // 200Mhz
|
||||
|
||||
POB0: opb {
|
||||
compatible = "ibm,opb-4xx", "ibm,opb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
/* Wish there was a nicer way of specifying a full
|
||||
* 32-bit range
|
||||
*/
|
||||
ranges = <0x00000000 0x00000200 0x00000000 0x80000000
|
||||
0x80000000 0x00000200 0x80000000 0x80000000>;
|
||||
clock-frequency = <100000000>;
|
||||
|
||||
UART0: serial@10000000 {
|
||||
device_type = "serial";
|
||||
compatible = "ns16750", "ns16550";
|
||||
reg = <0x10000000 0x00000008>;
|
||||
virtual-reg = <0xe1000000>;
|
||||
clock-frequency = <1851851>; // PCIe refclk/MCGC0_CTL[UART]
|
||||
current-speed = <115200>;
|
||||
interrupt-parent = <&MPIC>;
|
||||
interrupts = <34 2>;
|
||||
};
|
||||
|
||||
IIC0: i2c@00000000 {
|
||||
compatible = "ibm,iic-currituck", "ibm,iic";
|
||||
reg = <0x0 0x00000014>;
|
||||
interrupt-parent = <&MPIC>;
|
||||
interrupts = <79 2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
rtc@68 {
|
||||
compatible = "stm,m41t80", "m41st85";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
PCIE0: pciex@10100000000 { // 4xGBIF1
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x0>; /* port number */
|
||||
reg = <0x00000101 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000100 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0x80 0x20>;
|
||||
|
||||
// pci_space < pci_addr > < cpu_addr > < size >
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000110 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x00000140 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 46 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 47 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 48 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 49 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
PCIE1: pciex@30100000000 { // 4xGBIF0
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x1>; /* port number */
|
||||
reg = <0x00000301 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000300 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0x60 0x20>;
|
||||
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000310 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x00000340 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 38 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 39 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 40 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 41 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
PCIE2: pciex@38100000000 { // 2xGBIF0
|
||||
device_type = "pci";
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
compatible = "ibm,plb-pciex-476fpe", "ibm,plb-pciex";
|
||||
primary;
|
||||
port = <0x2>; /* port number */
|
||||
reg = <0x00000381 0x00000000 0x0 0x10000000 /* Config space access */
|
||||
0x00000380 0x00000000 0x0 0x00001000>; /* UTL Registers space access */
|
||||
dcr-reg = <0xA0 0x20>;
|
||||
|
||||
ranges = <0x02000000 0x00000000 0x80000000 0x00000390 0x80000000 0x0 0x80000000
|
||||
0x01000000 0x0 0x0 0x000003C0 0x0 0x0 0x00010000>;
|
||||
|
||||
/* Inbound starting at 0 to memsize filled in by zImage */
|
||||
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
|
||||
/* This drives busses 0 to 0xf */
|
||||
bus-range = <0x0 0xf>;
|
||||
|
||||
/* Legacy interrupts (note the weird polarity, the bridge seems
|
||||
* to invert PCIe legacy interrupts).
|
||||
* We are de-swizzling here because the numbers are actually for
|
||||
* port of the root complex virtual P2P bridge. But I want
|
||||
* to avoid putting a node for it in the tree, so the numbers
|
||||
* below are basically de-swizzled numbers.
|
||||
* The real slot is on idsel 0, so the swizzling is 1:1
|
||||
*/
|
||||
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
|
||||
interrupt-map = <
|
||||
0x0 0x0 0x0 0x1 &MPIC 54 0x2 /* int A */
|
||||
0x0 0x0 0x0 0x2 &MPIC 55 0x2 /* int B */
|
||||
0x0 0x0 0x0 0x3 &MPIC 56 0x2 /* int C */
|
||||
0x0 0x0 0x0 0x4 &MPIC 57 0x2 /* int D */>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = &UART0;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,248 @@
|
|||
/*
|
||||
* MPC8536 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
interrupts = <24 0x2 0 0>;
|
||||
bus-range = <0 0xff>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <25 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xb000 */
|
||||
&pci3 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <27 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <27 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8536-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8536-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8536-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
/* mark compat w/8572 to get some erratum treatment */
|
||||
gpio-controller@f000 {
|
||||
compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
|
||||
};
|
||||
|
||||
sata@18000 {
|
||||
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
|
||||
reg = <0x18000 0x1000>;
|
||||
cell-index = <1>;
|
||||
interrupts = <74 0x2 0 0>;
|
||||
};
|
||||
|
||||
sata@19000 {
|
||||
compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
|
||||
reg = <0x19000 0x1000>;
|
||||
cell-index = <2>;
|
||||
interrupts = <41 0x2 0 0>;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8536-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2, 512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-timer-0.dtsi"
|
||||
|
||||
usb@22000 {
|
||||
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
|
||||
reg = <0x22000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <28 0x2 0 0>;
|
||||
};
|
||||
|
||||
usb@23000 {
|
||||
compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
|
||||
reg = <0x23000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <46 0x2 0 0>;
|
||||
};
|
||||
|
||||
ptp_clock@24e00 {
|
||||
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
|
||||
ethernet@26000 {
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
usb@2b000 {
|
||||
compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
|
||||
reg = <0x2b000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <60 0x2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
/include/ "pq3-sec3.0-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,mpc8536-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* MPC8536 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8536";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
pci3 = &pci3;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8536@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,191 @@
|
|||
/*
|
||||
* MPC8544 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8544-lbc", "fsl,pq3-localbus", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
interrupts = <24 0x2 0 0>;
|
||||
bus-range = <0 0xff>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <25 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xb000 */
|
||||
&pci3 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <27 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <27 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8544-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <10>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8544-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8544-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8544-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2, 256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
|
||||
ethernet@26000 {
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
/include/ "pq3-sec2.1-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,mpc8544-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,63 @@
|
|||
/*
|
||||
* MPC8544 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8544";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
pci3 = &pci3;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8544@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,143 @@
|
|||
/*
|
||||
* MPC8548 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8548-lbc", "fsl,pq3-localbus", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
interrupts = <24 0x2 0 0>;
|
||||
bus-range = <0 0xff>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
interrupts = <25 0x2 0 0>;
|
||||
bus-range = <0 0xff>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8548-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <10>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8548-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8548-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8548-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2, 512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-1.dtsi"
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
/include/ "pq3-etsec1-3.dtsi"
|
||||
|
||||
/include/ "pq3-sec2.1-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,mpc8548-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,62 @@
|
|||
/*
|
||||
* MPC8548 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8548";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8548@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,270 @@
|
|||
/*
|
||||
* MPC8568 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
sleep = <&pmc 0x08000000>;
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8540-pci";
|
||||
device_type = "pci";
|
||||
interrupts = <24 0x2 0 0>;
|
||||
bus-range = <0 0xff>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
sleep = <&pmc 0x80000000>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
sleep = <&pmc 0x20000000>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <48 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
sleep = <&pmc 0x00080000>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8568-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <10>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8568-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8568-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
i2c-sleep-nexus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
sleep = <&pmc 0x00000004>;
|
||||
ranges;
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
|
||||
};
|
||||
|
||||
duart-sleep-nexus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
sleep = <&pmc 0x00000002>;
|
||||
ranges;
|
||||
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8568-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2, 512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
dma@21300 {
|
||||
sleep = <&pmc 0x00000400>;
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
ethernet@24000 {
|
||||
sleep = <&pmc 0x00000080>;
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec1-1.dtsi"
|
||||
ethernet@25000 {
|
||||
sleep = <&pmc 0x00000040>;
|
||||
};
|
||||
|
||||
par_io@e0100 {
|
||||
reg = <0xe0100 0x100>;
|
||||
device_type = "par_io";
|
||||
};
|
||||
|
||||
/include/ "pq3-sec2.1-0.dtsi"
|
||||
crypto@30000 {
|
||||
sleep = <&pmc 0x01000000>;
|
||||
};
|
||||
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-rmu-0.dtsi"
|
||||
rmu@d3000 {
|
||||
sleep = <&pmc 0x00040000>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8568-guts", "fsl,mpc8548-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
ranges = <0 0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
|
||||
pmc: power@70 {
|
||||
compatible = "fsl,mpc8568-pmc",
|
||||
"fsl,mpc8548-pmc";
|
||||
reg = <0x70 0x20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qe {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "qe";
|
||||
compatible = "fsl,qe";
|
||||
sleep = <&pmc 0x00000800>;
|
||||
brg-frequency = <0>;
|
||||
bus-frequency = <396000000>;
|
||||
fsl,qe-num-riscs = <2>;
|
||||
fsl,qe-num-snums = <28>;
|
||||
|
||||
qeic: interrupt-controller@80 {
|
||||
interrupt-controller;
|
||||
compatible = "fsl,qe-ic";
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x80 0x80>;
|
||||
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
spi@4c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,spi";
|
||||
reg = <0x4c0 0x40>;
|
||||
cell-index = <0>;
|
||||
interrupts = <2>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
spi@500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl,spi";
|
||||
reg = <0x500 0x40>;
|
||||
interrupts = <1>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@2000 {
|
||||
cell-index = <1>;
|
||||
reg = <0x2000 0x200>;
|
||||
interrupts = <32>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@3000 {
|
||||
cell-index = <2>;
|
||||
reg = <0x3000 0x200>;
|
||||
interrupts = <33>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
muram@10000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
||||
ranges = <0x0 0x10000 0x10000>;
|
||||
|
||||
data-only@0 {
|
||||
compatible = "fsl,qe-muram-data",
|
||||
"fsl,cpm-muram-data";
|
||||
reg = <0x0 0x10000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
/*
|
||||
* MPC8568 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8568";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
ethernet3 = &enet3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8568@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
sleep = <&pmc 0x00008000 // core
|
||||
&pmc 0x00004000>; // timebase
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,304 @@
|
|||
/*
|
||||
* MPC8569 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
sleep = <&pmc 0x08000000>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
sleep = <&pmc 0x20000000>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <48 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
sleep = <&pmc 0x00080000>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8569-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <10>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8569-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8569-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
i2c-sleep-nexus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
sleep = <&pmc 0x00000004>;
|
||||
ranges;
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
|
||||
};
|
||||
|
||||
duart-sleep-nexus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
sleep = <&pmc 0x00000002>;
|
||||
ranges;
|
||||
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8569-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2, 512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
sdhc@2e000 {
|
||||
sleep = <&pmc 0x00200000>;
|
||||
};
|
||||
|
||||
par_io@e0100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xe0100 0x100>;
|
||||
ranges = <0x0 0xe0100 0x100>;
|
||||
device_type = "par_io";
|
||||
};
|
||||
|
||||
/include/ "pq3-sec3.1-0.dtsi"
|
||||
crypto@30000 {
|
||||
sleep = <&pmc 0x01000000>;
|
||||
};
|
||||
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-rmu-0.dtsi"
|
||||
rmu@d3000 {
|
||||
sleep = <&pmc 0x00040000>;
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8569-guts", "fsl,mpc8548-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
ranges = <0 0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
|
||||
pmc: power@70 {
|
||||
compatible = "fsl,mpc8569-pmc",
|
||||
"fsl,mpc8548-pmc";
|
||||
reg = <0x70 0x20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qe {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "qe";
|
||||
compatible = "fsl,qe";
|
||||
sleep = <&pmc 0x00000800>;
|
||||
brg-frequency = <0>;
|
||||
bus-frequency = <0>;
|
||||
fsl,qe-num-riscs = <4>;
|
||||
fsl,qe-num-snums = <46>;
|
||||
|
||||
qeic: interrupt-controller@80 {
|
||||
interrupt-controller;
|
||||
compatible = "fsl,qe-ic";
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x80 0x80>;
|
||||
interrupts = <46 2 0 0 46 2 0 0>; //high:30 low:30
|
||||
interrupt-parent = <&mpic>;
|
||||
};
|
||||
|
||||
timer@440 {
|
||||
compatible = "fsl,mpc8569-qe-gtm",
|
||||
"fsl,qe-gtm", "fsl,gtm";
|
||||
reg = <0x440 0x40>;
|
||||
interrupts = <12 13 14 15>;
|
||||
interrupt-parent = <&qeic>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
spi@4c0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc8569-qe-spi", "fsl,spi";
|
||||
reg = <0x4c0 0x40>;
|
||||
cell-index = <0>;
|
||||
interrupts = <2>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
spi@500 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl,spi";
|
||||
reg = <0x500 0x40>;
|
||||
interrupts = <1>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
usb@6c0 {
|
||||
compatible = "fsl,mpc8569-qe-usb",
|
||||
"fsl,mpc8323-qe-usb";
|
||||
reg = <0x6c0 0x40 0x8b00 0x100>;
|
||||
interrupts = <11>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@2000 {
|
||||
cell-index = <1>;
|
||||
reg = <0x2000 0x200>;
|
||||
interrupts = <32>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@2200 {
|
||||
cell-index = <3>;
|
||||
reg = <0x2200 0x200>;
|
||||
interrupts = <34>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@3000 {
|
||||
cell-index = <2>;
|
||||
reg = <0x3000 0x200>;
|
||||
interrupts = <33>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@3200 {
|
||||
cell-index = <4>;
|
||||
reg = <0x3200 0x200>;
|
||||
interrupts = <35>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@3400 {
|
||||
cell-index = <6>;
|
||||
reg = <0x3400 0x200>;
|
||||
interrupts = <41>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
ucc@3600 {
|
||||
cell-index = <8>;
|
||||
reg = <0x3600 0x200>;
|
||||
interrupts = <43>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
muram@10000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
||||
ranges = <0x0 0x10000 0x20000>;
|
||||
|
||||
data-only@0 {
|
||||
compatible = "fsl,qe-muram-data",
|
||||
"fsl,cpm-muram-data";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
/*
|
||||
* MPC8569 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8569";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
ethernet3 = &enet3;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8569@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
sleep = <&pmc 0x00008000 // core
|
||||
&pmc 0x00004000>; // timebase
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,196 @@
|
|||
/*
|
||||
* MPC8572 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <24 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <24 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <25 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8572-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,mpc8572-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@6000 {
|
||||
compatible = "fsl,mpc8572-memory-controller";
|
||||
reg = <0x6000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-dma-1.dtsi"
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
gpio-controller@f000 {
|
||||
compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,mpc8572-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x100000>; // L2,1M
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-timer-0.dtsi"
|
||||
|
||||
ptp_clock@24e00 {
|
||||
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec1-1.dtsi"
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
/include/ "pq3-etsec1-3.dtsi"
|
||||
/include/ "pq3-sec3.0-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,mpc8572-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* MPC8572 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,MPC8572";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
ethernet3 = &enet3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,8572@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,8572@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,198 @@
|
|||
/*
|
||||
* P1010/P1014 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&ifc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,ifc", "simple-bus";
|
||||
interrupts = <16 2 0 0 19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1010-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1010-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1010-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi0: spi@7000 {
|
||||
fsl,espi-num-chipselects = <1>;
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
/include/ "pq3-sata2-0.dtsi"
|
||||
/include/ "pq3-sata2-1.dtsi"
|
||||
|
||||
can0: can@1c000 {
|
||||
compatible = "fsl,p1010-flexcan";
|
||||
reg = <0x1c000 0x1000>;
|
||||
interrupts = <48 0x2 0 0>;
|
||||
};
|
||||
|
||||
can1: can@1d000 {
|
||||
compatible = "fsl,p1010-flexcan";
|
||||
reg = <0x1d000 0x1000>;
|
||||
interrupts = <61 0x2 0 0>;
|
||||
};
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1010-l2-cache-controller",
|
||||
"fsl,p1014-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
sdhc@2e000 {
|
||||
fsl,sdhci-auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "pq3-sec4.4-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
/include/ "pq3-etsec2-0.dtsi"
|
||||
enet0: ethernet@b0000 {
|
||||
queue-group@b0000 {
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-1.dtsi"
|
||||
enet1: ethernet@b1000 {
|
||||
queue-group@b1000 {
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-2.dtsi"
|
||||
enet2: ethernet@b2000 {
|
||||
queue-group@b2000 {
|
||||
fsl,rx-bit-map = <0xff>;
|
||||
fsl,tx-bit-map = <0xff>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1010-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
/*
|
||||
* P1010/P1014 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1010";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
can0 = &can0;
|
||||
can1 = &can1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1010@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,174 @@
|
|||
/*
|
||||
* P1020/P1011 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1020-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-1.dtsi"
|
||||
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
/include/ "pq3-sec3.3-0.dtsi"
|
||||
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
/include/ "pq3-etsec2-0.dtsi"
|
||||
enet0: enet0_grp2: ethernet@b0000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-1.dtsi"
|
||||
enet1: enet1_grp2: ethernet@b1000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-2.dtsi"
|
||||
enet2: enet2_grp2: ethernet@b2000 {
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-grp2-0.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-1.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-2.dtsi"
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* P1020/P1011 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,225 @@
|
|||
/*
|
||||
* P1021/P1012 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1021-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1021-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1021-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1021-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
/include/ "pq3-sec3.3-0.dtsi"
|
||||
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
/include/ "pq3-etsec2-0.dtsi"
|
||||
enet0: enet0_grp2: ethernet@b0000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-1.dtsi"
|
||||
enet1: enet1_grp2: ethernet@b1000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-2.dtsi"
|
||||
enet2: enet2_grp2: ethernet@b2000 {
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1021-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
||||
&qe {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "qe";
|
||||
compatible = "fsl,qe";
|
||||
fsl,qe-num-riscs = <1>;
|
||||
fsl,qe-num-snums = <28>;
|
||||
|
||||
qeic: interrupt-controller@80 {
|
||||
interrupt-controller;
|
||||
compatible = "fsl,qe-ic";
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0x80 0x80>;
|
||||
interrupts = <63 2 0 0 60 2 0 0>; //high:47 low:44
|
||||
};
|
||||
|
||||
ucc@2000 {
|
||||
cell-index = <1>;
|
||||
reg = <0x2000 0x200>;
|
||||
interrupts = <32>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
mdio@2120 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x2120 0x18>;
|
||||
compatible = "fsl,ucc-mdio";
|
||||
};
|
||||
|
||||
ucc@2400 {
|
||||
cell-index = <5>;
|
||||
reg = <0x2400 0x200>;
|
||||
interrupts = <40>;
|
||||
interrupt-parent = <&qeic>;
|
||||
};
|
||||
|
||||
muram@10000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
||||
ranges = <0x0 0x10000 0x6000>;
|
||||
|
||||
data-only@0 {
|
||||
compatible = "fsl,qe-muram-data",
|
||||
"fsl,cpm-muram-data";
|
||||
reg = <0x0 0x6000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-grp2-0.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-1.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-2.dtsi"
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* P1021/P1012 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1021";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1021@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1021@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,235 @@
|
|||
/*
|
||||
* P1022/P1013 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xb000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p1022-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1022-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1022-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1022-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-1.dtsi"
|
||||
dma@c300 {
|
||||
dma00: dma-channel@0 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
};
|
||||
dma01: dma-channel@80 {
|
||||
compatible = "fsl,ssi-dma-channel";
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
display@10000 {
|
||||
compatible = "fsl,diu", "fsl,p1022-diu";
|
||||
reg = <0x10000 1000>;
|
||||
interrupts = <64 2 0 0>;
|
||||
};
|
||||
|
||||
ssi@15000 {
|
||||
compatible = "fsl,mpc8610-ssi";
|
||||
cell-index = <0>;
|
||||
reg = <0x15000 0x100>;
|
||||
interrupts = <75 2 0 0>;
|
||||
fsl,playback-dma = <&dma00>;
|
||||
fsl,capture-dma = <&dma01>;
|
||||
fsl,fifo-depth = <15>;
|
||||
};
|
||||
|
||||
/include/ "pq3-sata2-0.dtsi"
|
||||
/include/ "pq3-sata2-1.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1022-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-1.dtsi"
|
||||
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
sdhc@2e000 {
|
||||
fsl,sdhci-auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "pq3-sec3.3-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
/include/ "pq3-etsec2-0.dtsi"
|
||||
enet0: enet0_grp2: ethernet@b0000 {
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-1.dtsi"
|
||||
enet1: enet1_grp2: ethernet@b1000 {
|
||||
};
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1022-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
|
||||
power@e0070{
|
||||
compatible = "fsl,mpc8536-pmc", "fsl,mpc8548-pmc";
|
||||
reg = <0xe0070 0x20>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
/include/ "pq3-etsec2-grp2-0.dtsi"
|
||||
/include/ "pq3-etsec2-grp2-1.dtsi"
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* P1022/P1013 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1022";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1022@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1022@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,224 @@
|
|||
/*
|
||||
* P1023/P1017 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0xb000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p1023-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 0 0>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p1023-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p1023-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p1023-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p1023-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x40000>; // L2,256K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x30000 0x10000>;
|
||||
ranges = <0 0x30000 0x10000>;
|
||||
interrupts = <58 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <57 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <57 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v4.2-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p1023-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,76 @@
|
|||
/*
|
||||
* P1023/P1017 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P1023";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P1023@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P1023@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,194 @@
|
|||
/*
|
||||
* P2020/P2010 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <19 2 0 0>;
|
||||
};
|
||||
|
||||
/* controller at 0xa000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <26 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <26 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x9000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <25 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <25 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x8000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,mpc8548-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 255>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <24 2 0 0>;
|
||||
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <24 2 0 0>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
|
||||
0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,p2020-immr", "simple-bus";
|
||||
bus-frequency = <0>; // Filled out by uboot.
|
||||
|
||||
ecm-law@0 {
|
||||
compatible = "fsl,ecm-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <12>;
|
||||
};
|
||||
|
||||
ecm@1000 {
|
||||
compatible = "fsl,p2020-ecm", "fsl,ecm";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <17 2 0 0>;
|
||||
};
|
||||
|
||||
memory-controller@2000 {
|
||||
compatible = "fsl,p2020-memory-controller";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <18 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-i2c-0.dtsi"
|
||||
/include/ "pq3-i2c-1.dtsi"
|
||||
/include/ "pq3-duart-0.dtsi"
|
||||
/include/ "pq3-espi-0.dtsi"
|
||||
spi0: spi@7000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-1.dtsi"
|
||||
/include/ "pq3-gpio-0.dtsi"
|
||||
|
||||
L2: l2-cache-controller@20000 {
|
||||
compatible = "fsl,p2020-l2-cache-controller";
|
||||
reg = <0x20000 0x1000>;
|
||||
cache-line-size = <32>; // 32 bytes
|
||||
cache-size = <0x80000>; // L2,512K
|
||||
interrupts = <16 2 0 0>;
|
||||
};
|
||||
|
||||
/include/ "pq3-dma-0.dtsi"
|
||||
/include/ "pq3-usb2-dr-0.dtsi"
|
||||
/include/ "pq3-etsec1-0.dtsi"
|
||||
/include/ "pq3-etsec1-timer-0.dtsi"
|
||||
|
||||
ptp_clock@24e00 {
|
||||
interrupts = <68 2 0 0 69 2 0 0 70 2 0 0>;
|
||||
};
|
||||
|
||||
|
||||
/include/ "pq3-etsec1-1.dtsi"
|
||||
/include/ "pq3-etsec1-2.dtsi"
|
||||
/include/ "pq3-esdhc-0.dtsi"
|
||||
/include/ "pq3-sec3.1-0.dtsi"
|
||||
/include/ "pq3-mpic.dtsi"
|
||||
/include/ "pq3-mpic-timer-B.dtsi"
|
||||
|
||||
global-utilities@e0000 {
|
||||
compatible = "fsl,p2020-guts";
|
||||
reg = <0xe0000 0x1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
/*
|
||||
* P2020/P2010 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P2020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
ethernet0 = &enet0;
|
||||
ethernet1 = &enet1;
|
||||
ethernet2 = &enet2;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
PowerPC,P2020@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0x0>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
|
||||
PowerPC,P2020@1 {
|
||||
device_type = "cpu";
|
||||
reg = <0x1>;
|
||||
next-level-cache = <&L2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,325 @@
|
|||
/*
|
||||
* P2041/P2040 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@42000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x42000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@43000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x43000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000>;
|
||||
interrupts = <16 2 1 27>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x4000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p2041-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
/include/ "qoriq-sec4.2-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,111 @@
|
|||
/*
|
||||
* P2041 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P2041";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e500mc@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e500mc@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,352 @@
|
|||
/*
|
||||
* P3041 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p3041-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x203000 */
|
||||
&pci3 {
|
||||
compatible = "fsl,p3041-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 12>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 12>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 43 1 0 0
|
||||
0000 0 0 2 &mpic 0 1 0 0
|
||||
0000 0 0 3 &mpic 4 1 0 0
|
||||
0000 0 0 4 &mpic 8 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p3041-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p3041-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p3041-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p3041-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@42000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x42000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@43000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x43000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p3041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000>;
|
||||
interrupts = <16 2 1 27>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x4000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p3041-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p3041-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p3041-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
/include/ "qoriq-sec4.2-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
* P3041 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P3041";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
pci3 = &pci3;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e500mc@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e500mc@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,296 @@
|
|||
/*
|
||||
* P3060 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@44000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu4>;
|
||||
reg = <0x44000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@45000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu5>;
|
||||
reg = <0x45000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@46000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu6>;
|
||||
reg = <0x46000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@47000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu7>;
|
||||
reg = <0x47000 0x1000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p3060-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x5000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-rmu-0.dtsi"
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p3060-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
/include/ "qoriq-sec4.1-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,125 @@
|
|||
/*
|
||||
* P3060 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P3060";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu4: PowerPC,e500mc@4 {
|
||||
device_type = "cpu";
|
||||
reg = <4>;
|
||||
next-level-cache = <&L2_4>;
|
||||
L2_4: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu5: PowerPC,e500mc@5 {
|
||||
device_type = "cpu";
|
||||
reg = <5>;
|
||||
next-level-cache = <&L2_5>;
|
||||
L2_5: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu6: PowerPC,e500mc@6 {
|
||||
device_type = "cpu";
|
||||
reg = <6>;
|
||||
next-level-cache = <&L2_6>;
|
||||
L2_6: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu7: PowerPC,e500mc@7 {
|
||||
device_type = "cpu";
|
||||
reg = <7>;
|
||||
next-level-cache = <&L2_7>;
|
||||
L2_7: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,350 @@
|
|||
/*
|
||||
* P4080/P4040 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p4080-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p4080-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p4080-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p4080-pcie";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
fsl,srio-rmu-handle = <&rmu>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p4080-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p4080-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@13000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr2>;
|
||||
reg = <0x13000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p4080-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p4080-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@42000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu2>;
|
||||
reg = <0x42000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@43000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu3>;
|
||||
reg = <0x43000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@44000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu4>;
|
||||
reg = <0x44000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@45000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu5>;
|
||||
reg = <0x45000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@46000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu6>;
|
||||
reg = <0x46000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@47000 {
|
||||
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu7>;
|
||||
reg = <0x47000 0x1000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
ddr2: memory-controller@9000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.4","fsl,qoriq-memory-controller";
|
||||
reg = <0x9000 0x1000>;
|
||||
interrupts = <16 2 1 22>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x5000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-rmu-0.dtsi"
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p4080-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p4080-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p4080-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
voltage-ranges = <3300 3300>;
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
/include/ "qoriq-sec4.0-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,143 @@
|
|||
/*
|
||||
* P4080/P4040 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P4080";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e500mc@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e500mc@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu2: PowerPC,e500mc@2 {
|
||||
device_type = "cpu";
|
||||
reg = <2>;
|
||||
next-level-cache = <&L2_2>;
|
||||
L2_2: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu3: PowerPC,e500mc@3 {
|
||||
device_type = "cpu";
|
||||
reg = <3>;
|
||||
next-level-cache = <&L2_3>;
|
||||
L2_3: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu4: PowerPC,e500mc@4 {
|
||||
device_type = "cpu";
|
||||
reg = <4>;
|
||||
next-level-cache = <&L2_4>;
|
||||
L2_4: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu5: PowerPC,e500mc@5 {
|
||||
device_type = "cpu";
|
||||
reg = <5>;
|
||||
next-level-cache = <&L2_5>;
|
||||
L2_5: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu6: PowerPC,e500mc@6 {
|
||||
device_type = "cpu";
|
||||
reg = <6>;
|
||||
next-level-cache = <&L2_6>;
|
||||
L2_6: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu7: PowerPC,e500mc@7 {
|
||||
device_type = "cpu";
|
||||
reg = <7>;
|
||||
next-level-cache = <&L2_7>;
|
||||
L2_7: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,355 @@
|
|||
/*
|
||||
* P5020/5010 Silicon/SoC Device Tree Source (post include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&lbc {
|
||||
compatible = "fsl,p5020-elbc", "fsl,elbc", "simple-bus";
|
||||
interrupts = <25 2 0 0>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
|
||||
/* controller at 0x200000 */
|
||||
&pci0 {
|
||||
compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 15>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 15>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 40 1 0 0
|
||||
0000 0 0 2 &mpic 1 1 0 0
|
||||
0000 0 0 3 &mpic 2 1 0 0
|
||||
0000 0 0 4 &mpic 3 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x201000 */
|
||||
&pci1 {
|
||||
compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 14>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 14>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 41 1 0 0
|
||||
0000 0 0 2 &mpic 5 1 0 0
|
||||
0000 0 0 3 &mpic 6 1 0 0
|
||||
0000 0 0 4 &mpic 7 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x202000 */
|
||||
&pci2 {
|
||||
compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 13>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 13>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 42 1 0 0
|
||||
0000 0 0 2 &mpic 9 1 0 0
|
||||
0000 0 0 3 &mpic 10 1 0 0
|
||||
0000 0 0 4 &mpic 11 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* controller at 0x203000 */
|
||||
&pci3 {
|
||||
compatible = "fsl,p5020-pcie", "fsl,qoriq-pcie-v2.2";
|
||||
device_type = "pci";
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
bus-range = <0x0 0xff>;
|
||||
clock-frequency = <33333333>;
|
||||
interrupts = <16 2 1 12>;
|
||||
pcie@0 {
|
||||
reg = <0 0 0 0 0>;
|
||||
#interrupt-cells = <1>;
|
||||
#size-cells = <2>;
|
||||
#address-cells = <3>;
|
||||
device_type = "pci";
|
||||
interrupts = <16 2 1 12>;
|
||||
interrupt-map-mask = <0xf800 0 0 7>;
|
||||
interrupt-map = <
|
||||
/* IDSEL 0x0 */
|
||||
0000 0 0 1 &mpic 43 1 0 0
|
||||
0000 0 0 2 &mpic 0 1 0 0
|
||||
0000 0 0 3 &mpic 4 1 0 0
|
||||
0000 0 0 4 &mpic 8 1 0 0
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&rio {
|
||||
compatible = "fsl,srio";
|
||||
interrupts = <16 2 1 11>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
port1 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <1>;
|
||||
};
|
||||
|
||||
port2 {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
cell-index = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dcsr {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,dcsr", "simple-bus";
|
||||
|
||||
dcsr-epu@0 {
|
||||
compatible = "fsl,dcsr-epu";
|
||||
interrupts = <52 2 0 0
|
||||
84 2 0 0
|
||||
85 2 0 0>;
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
dcsr-npc {
|
||||
compatible = "fsl,dcsr-npc";
|
||||
reg = <0x1000 0x1000 0x1000000 0x8000>;
|
||||
};
|
||||
dcsr-nxc@2000 {
|
||||
compatible = "fsl,dcsr-nxc";
|
||||
reg = <0x2000 0x1000>;
|
||||
};
|
||||
dcsr-corenet {
|
||||
compatible = "fsl,dcsr-corenet";
|
||||
reg = <0x8000 0x1000 0xB0000 0x1000>;
|
||||
};
|
||||
dcsr-dpaa@9000 {
|
||||
compatible = "fsl,p5020-dcsr-dpaa", "fsl,dcsr-dpaa";
|
||||
reg = <0x9000 0x1000>;
|
||||
};
|
||||
dcsr-ocn@11000 {
|
||||
compatible = "fsl,p5020-dcsr-ocn", "fsl,dcsr-ocn";
|
||||
reg = <0x11000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@12000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr1>;
|
||||
reg = <0x12000 0x1000>;
|
||||
};
|
||||
dcsr-ddr@13000 {
|
||||
compatible = "fsl,dcsr-ddr";
|
||||
dev-handle = <&ddr2>;
|
||||
reg = <0x13000 0x1000>;
|
||||
};
|
||||
dcsr-nal@18000 {
|
||||
compatible = "fsl,p5020-dcsr-nal", "fsl,dcsr-nal";
|
||||
reg = <0x18000 0x1000>;
|
||||
};
|
||||
dcsr-rcpm@22000 {
|
||||
compatible = "fsl,p5020-dcsr-rcpm", "fsl,dcsr-rcpm";
|
||||
reg = <0x22000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@40000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu0>;
|
||||
reg = <0x40000 0x1000>;
|
||||
};
|
||||
dcsr-cpu-sb-proxy@41000 {
|
||||
compatible = "fsl,dcsr-e5500-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
|
||||
cpu-handle = <&cpu1>;
|
||||
reg = <0x41000 0x1000>;
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "soc";
|
||||
compatible = "simple-bus";
|
||||
|
||||
soc-sram-error {
|
||||
compatible = "fsl,soc-sram-error";
|
||||
interrupts = <16 2 1 29>;
|
||||
};
|
||||
|
||||
corenet-law@0 {
|
||||
compatible = "fsl,corenet-law";
|
||||
reg = <0x0 0x1000>;
|
||||
fsl,num-laws = <32>;
|
||||
};
|
||||
|
||||
ddr1: memory-controller@8000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
|
||||
reg = <0x8000 0x1000>;
|
||||
interrupts = <16 2 1 23>;
|
||||
};
|
||||
|
||||
ddr2: memory-controller@9000 {
|
||||
compatible = "fsl,qoriq-memory-controller-v4.5","fsl,qoriq-memory-controller";
|
||||
reg = <0x9000 0x1000>;
|
||||
interrupts = <16 2 1 22>;
|
||||
};
|
||||
|
||||
cpc: l3-cache-controller@10000 {
|
||||
compatible = "fsl,p5020-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
|
||||
reg = <0x10000 0x1000
|
||||
0x11000 0x1000>;
|
||||
interrupts = <16 2 1 27
|
||||
16 2 1 26>;
|
||||
};
|
||||
|
||||
corenet-cf@18000 {
|
||||
compatible = "fsl,corenet-cf";
|
||||
reg = <0x18000 0x1000>;
|
||||
interrupts = <16 2 1 31>;
|
||||
fsl,ccf-num-csdids = <32>;
|
||||
fsl,ccf-num-snoopids = <32>;
|
||||
};
|
||||
|
||||
iommu@20000 {
|
||||
compatible = "fsl,pamu-v1.0", "fsl,pamu";
|
||||
reg = <0x20000 0x4000>;
|
||||
interrupts = <
|
||||
24 2 0 0
|
||||
16 2 1 30>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-mpic.dtsi"
|
||||
|
||||
guts: global-utilities@e0000 {
|
||||
compatible = "fsl,qoriq-device-config-1.0";
|
||||
reg = <0xe0000 0xe00>;
|
||||
fsl,has-rstcr;
|
||||
#sleep-cells = <1>;
|
||||
fsl,liodn-bits = <12>;
|
||||
};
|
||||
|
||||
pins: global-utilities@e0e00 {
|
||||
compatible = "fsl,qoriq-pin-control-1.0";
|
||||
reg = <0xe0e00 0x200>;
|
||||
#sleep-cells = <2>;
|
||||
};
|
||||
|
||||
clockgen: global-utilities@e1000 {
|
||||
compatible = "fsl,p5020-clockgen", "fsl,qoriq-clockgen-1.0";
|
||||
reg = <0xe1000 0x1000>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
||||
rcpm: global-utilities@e2000 {
|
||||
compatible = "fsl,qoriq-rcpm-1.0";
|
||||
reg = <0xe2000 0x1000>;
|
||||
#sleep-cells = <1>;
|
||||
};
|
||||
|
||||
sfp: sfp@e8000 {
|
||||
compatible = "fsl,p5020-sfp", "fsl,qoriq-sfp-1.0";
|
||||
reg = <0xe8000 0x1000>;
|
||||
};
|
||||
|
||||
serdes: serdes@ea000 {
|
||||
compatible = "fsl,p5020-serdes";
|
||||
reg = <0xea000 0x1000>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-dma-0.dtsi"
|
||||
/include/ "qoriq-dma-1.dtsi"
|
||||
/include/ "qoriq-espi-0.dtsi"
|
||||
spi@110000 {
|
||||
fsl,espi-num-chipselects = <4>;
|
||||
};
|
||||
|
||||
/include/ "qoriq-esdhc-0.dtsi"
|
||||
sdhc@114000 {
|
||||
sdhci,auto-cmd12;
|
||||
};
|
||||
|
||||
/include/ "qoriq-i2c-0.dtsi"
|
||||
/include/ "qoriq-i2c-1.dtsi"
|
||||
/include/ "qoriq-duart-0.dtsi"
|
||||
/include/ "qoriq-duart-1.dtsi"
|
||||
/include/ "qoriq-gpio-0.dtsi"
|
||||
/include/ "qoriq-usb2-mph-0.dtsi"
|
||||
usb0: usb@210000 {
|
||||
phy_type = "utmi";
|
||||
port0;
|
||||
};
|
||||
|
||||
/include/ "qoriq-usb2-dr-0.dtsi"
|
||||
usb1: usb@211000 {
|
||||
dr_mode = "host";
|
||||
phy_type = "utmi";
|
||||
};
|
||||
|
||||
/include/ "qoriq-sata2-0.dtsi"
|
||||
/include/ "qoriq-sata2-1.dtsi"
|
||||
/include/ "qoriq-sec4.2-0.dtsi"
|
||||
};
|
||||
|
|
@ -0,0 +1,96 @@
|
|||
/*
|
||||
* P5020/P5010 Silicon/SoC Device Tree Source (pre include)
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
/ {
|
||||
compatible = "fsl,P5020";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
|
||||
aliases {
|
||||
ccsr = &soc;
|
||||
dcsr = &dcsr;
|
||||
|
||||
serial0 = &serial0;
|
||||
serial1 = &serial1;
|
||||
serial2 = &serial2;
|
||||
serial3 = &serial3;
|
||||
pci0 = &pci0;
|
||||
pci1 = &pci1;
|
||||
pci2 = &pci2;
|
||||
pci3 = &pci3;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
dma0 = &dma0;
|
||||
dma1 = &dma1;
|
||||
sdhc = &sdhc;
|
||||
msi0 = &msi0;
|
||||
msi1 = &msi1;
|
||||
msi2 = &msi2;
|
||||
|
||||
crypto = &crypto;
|
||||
sec_jr0 = &sec_jr0;
|
||||
sec_jr1 = &sec_jr1;
|
||||
sec_jr2 = &sec_jr2;
|
||||
sec_jr3 = &sec_jr3;
|
||||
rtic_a = &rtic_a;
|
||||
rtic_b = &rtic_b;
|
||||
rtic_c = &rtic_c;
|
||||
rtic_d = &rtic_d;
|
||||
sec_mon = &sec_mon;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: PowerPC,e5500@0 {
|
||||
device_type = "cpu";
|
||||
reg = <0>;
|
||||
next-level-cache = <&L2_0>;
|
||||
L2_0: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
cpu1: PowerPC,e5500@1 {
|
||||
device_type = "cpu";
|
||||
reg = <1>;
|
||||
next-level-cache = <&L2_1>;
|
||||
L2_1: l2-cache {
|
||||
next-level-cache = <&cpc>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* PQ3 DMA device tree stub [ controller @ offset 0x21000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x21300 0x4>;
|
||||
ranges = <0x0 0x21100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <20 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <21 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <22 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <23 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* PQ3 DMA device tree stub [ controller @ offset 0xc300 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0xc300 0x4>;
|
||||
ranges = <0x0 0xc100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <76 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <77 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <78 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <79 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* PQ3 DUART device tree stub [ controller @ offset 0x4000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <42 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* PQ3 eSDHC device tree stub [ controller @ offset 0x2e000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sdhc@2e000 {
|
||||
compatible = "fsl,esdhc";
|
||||
reg = <0x2e000 0x1000>;
|
||||
interrupts = <72 0x2 0 0>;
|
||||
/* Filled in by U-Boot */
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* PQ3 eSPI device tree stub [ controller @ offset 0x7000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
spi@7000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc8536-espi";
|
||||
reg = <0x7000 0x1000>;
|
||||
interrupts = <59 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* PQ3 eTSEC device tree stub [ @ offsets 0x24000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
ethernet@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <0>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x24000 0x1000>;
|
||||
ranges = <0x0 0x24000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
||||
};
|
||||
|
||||
mdio@24520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-mdio";
|
||||
reg = <0x24520 0x20>;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* PQ3 eTSEC device tree stub [ @ offsets 0x25000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
ethernet@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x25000 0x1000>;
|
||||
ranges = <0x0 0x25000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
||||
};
|
||||
|
||||
mdio@25520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x25520 0x20>;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* PQ3 eTSEC device tree stub [ @ offsets 0x26000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
ethernet@26000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <2>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x26000 0x1000>;
|
||||
ranges = <0x0 0x26000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
|
||||
};
|
||||
|
||||
mdio@26520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x26520 0x20>;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* PQ3 eTSEC device tree stub [ @ offsets 0x27000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
ethernet@27000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
cell-index = <3>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "gianfar";
|
||||
reg = <0x27000 0x1000>;
|
||||
ranges = <0x0 0x27000 0x1000>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>;
|
||||
};
|
||||
|
||||
mdio@27520 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,gianfar-tbi";
|
||||
reg = <0x27520 0x20>;
|
||||
};
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* PQ3 eTSEC Timer (IEEE 1588) device tree stub [ @ offsets 0x24e00 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
ptp_clock@24e00 {
|
||||
compatible = "fsl,etsec-ptp";
|
||||
reg = <0x24e00 0xb0>;
|
||||
interrupts = <68 2 0 0 69 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 device tree stub [ @ offsets 0x24000/0xb0000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
|
||||
mdio@24000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-mdio";
|
||||
reg = <0x24000 0x1000 0xb0030 0x4>;
|
||||
};
|
||||
|
||||
ethernet@b0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
fsl,magic-packet;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
|
||||
queue-group@b0000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb0000 0x1000>;
|
||||
interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,60 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 device tree stub [ @ offsets 0x25000/0xb1000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
|
||||
mdio@25000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-tbi";
|
||||
reg = <0x25000 0x1000 0xb1030 0x4>;
|
||||
};
|
||||
|
||||
ethernet@b1000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
fsl,magic-packet;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
|
||||
queue-group@b1000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb1000 0x1000>;
|
||||
interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,59 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 device tree stub [ @ offsets 0x26000/0xb2000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
mdio@26000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,etsec2-tbi";
|
||||
reg = <0x26000 0x1000 0xb1030 0x4>;
|
||||
};
|
||||
|
||||
ethernet@b2000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
device_type = "network";
|
||||
model = "eTSEC";
|
||||
compatible = "fsl,etsec2";
|
||||
fsl,num_rx_queues = <0x8>;
|
||||
fsl,num_tx_queues = <0x8>;
|
||||
fsl,magic-packet;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
|
||||
queue-group@b2000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb2000 0x1000>;
|
||||
interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb4000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&enet0_grp2 {
|
||||
queue-group@b4000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb4000 0x1000>;
|
||||
interrupts = <17 2 0 0 18 2 0 0 24 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb5000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&enet1_grp2 {
|
||||
queue-group@b5000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb5000 0x1000>;
|
||||
interrupts = <51 2 0 0 52 2 0 0 67 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* PQ3 eTSEC2 Group 2 device tree stub [ @ offsets 0xb6000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
&enet2_grp2 {
|
||||
queue-group@b6000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0xb6000 0x1000>;
|
||||
interrupts = <25 2 0 0 26 2 0 0 27 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* PQ3 GPIO device tree stub [ controller @ offset 0xf000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
gpio-controller@f000 {
|
||||
#gpio-cells = <2>;
|
||||
compatible = "fsl,pq3-gpio";
|
||||
reg = <0xf000 0x100>;
|
||||
interrupts = <47 0x2 0 0>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* PQ3 I2C device tree stub [ controller @ offset 0x3000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
i2c@3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3000 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* PQ3 I2C device tree stub [ controller @ offset 0x3100 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
i2c@3100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x3100 0x100>;
|
||||
interrupts = <43 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
* PQ3 MPIC Timer (Group B) device tree stub [ controller @ offset 0x42100 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
timer@42100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x42100 0x100 0x42300 4>;
|
||||
interrupts = <4 0 3 0
|
||||
5 0 3 0
|
||||
6 0 3 0
|
||||
7 0 3 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* PQ3 MPIC device tree stub [ controller @ offset 0x40000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <4>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "fsl,mpic";
|
||||
device_type = "open-pic";
|
||||
};
|
||||
|
||||
timer@41100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x41100 0x100 0x41300 4>;
|
||||
interrupts = <0 0 3 0
|
||||
1 0 3 0
|
||||
2 0 3 0
|
||||
3 0 3 0>;
|
||||
};
|
||||
|
||||
msi@41600 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41600 0x80>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* PQ3 RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
rmu: rmu@d3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,srio-rmu";
|
||||
reg = <0xd3000 0x500>;
|
||||
ranges = <0x0 0xd3000 0x500>;
|
||||
|
||||
message-unit@0 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x0 0x100>;
|
||||
interrupts = <
|
||||
53 2 0 0 /* msg1_tx_irq */
|
||||
54 2 0 0>;/* msg1_rx_irq */
|
||||
};
|
||||
message-unit@100 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x100 0x100>;
|
||||
interrupts = <
|
||||
55 2 0 0 /* msg2_tx_irq */
|
||||
56 2 0 0>;/* msg2_rx_irq */
|
||||
};
|
||||
doorbell-unit@400 {
|
||||
compatible = "fsl,srio-dbell-unit";
|
||||
reg = <0x400 0x80>;
|
||||
interrupts = <
|
||||
49 2 0 0 /* bell_outb_irq */
|
||||
50 2 0 0>;/* bell_inb_irq */
|
||||
};
|
||||
port-write-unit@4e0 {
|
||||
compatible = "fsl,srio-port-write-unit";
|
||||
reg = <0x4e0 0x20>;
|
||||
interrupts = <48 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* PQ3 SATAv2 device tree stub [ controller @ offset 0x18000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sata@18000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x18000 0x1000>;
|
||||
cell-index = <1>;
|
||||
interrupts = <74 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* PQ3 SATAv2 device tree stub [ controller @ offset 0x19000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sata@19000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x19000 0x1000>;
|
||||
cell-index = <2>;
|
||||
interrupts = <41 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
/*
|
||||
* PQ3 Sec/Crypto 2.1 device tree stub [ controller @ offset 0x30000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec2.1", "fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xfe>;
|
||||
fsl,descriptor-types-mask = <0x12b0ebf>;
|
||||
};
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* PQ3 Sec/Crypto 3.0 device tree stub [ controller @ offset 0x30000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.0",
|
||||
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
|
||||
"fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0x9fe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
};
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* PQ3 Sec/Crypto 3.1 device tree stub [ controller @ offset 0x30000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.1", "fsl,sec3.0",
|
||||
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
|
||||
"fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0xbfe>;
|
||||
fsl,descriptor-types-mask = <0x3ab0ebf>;
|
||||
};
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
/*
|
||||
* PQ3 Sec/Crypto 3.3 device tree stub [ controller @ offset 0x30000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
|
||||
"fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
|
||||
"fsl,sec2.0";
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <45 2 0 0 58 2 0 0>;
|
||||
fsl,num-channels = <4>;
|
||||
fsl,channel-fifo-len = <24>;
|
||||
fsl,exec-units-mask = <0x97c>;
|
||||
fsl,descriptor-types-mask = <0x3a30abf>;
|
||||
};
|
||||
|
|
@ -0,0 +1,65 @@
|
|||
/*
|
||||
* PQ3 Sec/Crypto 4.4 device tree stub [ controller @ offset 0x30000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto@30000 {
|
||||
compatible = "fsl,sec4.4", "fsl,sec4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x30000 0x10000>;
|
||||
interrupts = <58 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <45 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* PQ3 USB DR device tree stub [ controller @ offset 0x22000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
usb@22000 {
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x22000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <28 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* PQ3 USB DR device tree stub [ controller @ offset 0x23000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
usb@23000 {
|
||||
compatible = "fsl-usb2-dr";
|
||||
reg = <0x23000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <46 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* QorIQ DMA device tree stub [ controller @ offset 0x100000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
dma0: dma@100300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x100300 0x4>;
|
||||
ranges = <0x0 0x100100 0x200>;
|
||||
cell-index = <0>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <28 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <29 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <30 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <31 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
/*
|
||||
* QorIQ DMA device tree stub [ controller @ offset 0x101000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
dma1: dma@101300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,eloplus-dma";
|
||||
reg = <0x101300 0x4>;
|
||||
ranges = <0x0 0x101100 0x200>;
|
||||
cell-index = <1>;
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x0 0x80>;
|
||||
cell-index = <0>;
|
||||
interrupts = <32 2 0 0>;
|
||||
};
|
||||
dma-channel@80 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x80 0x80>;
|
||||
cell-index = <1>;
|
||||
interrupts = <33 2 0 0>;
|
||||
};
|
||||
dma-channel@100 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x100 0x80>;
|
||||
cell-index = <2>;
|
||||
interrupts = <34 2 0 0>;
|
||||
};
|
||||
dma-channel@180 {
|
||||
compatible = "fsl,eloplus-dma-channel";
|
||||
reg = <0x180 0x80>;
|
||||
cell-index = <3>;
|
||||
interrupts = <35 2 0 0>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* QorIQ DUART device tree stub [ controller @ offset 0x11c000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
serial0: serial@11c500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x11c500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <36 2 0 0>;
|
||||
};
|
||||
|
||||
serial1: serial@11c600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x11c600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <36 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/*
|
||||
* QorIQ DUART device tree stub [ controller @ offset 0x11d000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
serial2: serial@11d500 {
|
||||
cell-index = <2>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x11d500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <37 2 0 0>;
|
||||
};
|
||||
|
||||
serial3: serial@11d600 {
|
||||
cell-index = <3>;
|
||||
device_type = "serial";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x11d600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <37 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
/*
|
||||
* QorIQ eSDHC device tree stub [ controller @ offset 0x114000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sdhc: sdhc@114000 {
|
||||
compatible = "fsl,esdhc";
|
||||
reg = <0x114000 0x1000>;
|
||||
interrupts = <48 2 0 0>;
|
||||
clock-frequency = <0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* QorIQ eSPI device tree stub [ controller @ offset 0x110000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
spi@110000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,mpc8536-espi";
|
||||
reg = <0x110000 0x1000>;
|
||||
interrupts = <53 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* QorIQ GPIO device tree stub [ controller @ offset 0x130000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
gpio0: gpio@130000 {
|
||||
compatible = "fsl,qoriq-gpio";
|
||||
reg = <0x130000 0x1000>;
|
||||
interrupts = <55 2 0 0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* QorIQ I2C device tree stub [ controller @ offset 0x118000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
i2c@118000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <0>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x118000 0x100>;
|
||||
interrupts = <38 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@118100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <1>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x118100 0x100>;
|
||||
interrupts = <38 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
|
@ -0,0 +1,53 @@
|
|||
/*
|
||||
* QorIQ I2C device tree stub [ controller @ offset 0x119000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
i2c@119000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <2>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x119000 0x100>;
|
||||
interrupts = <39 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
||||
i2c@119100 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cell-index = <3>;
|
||||
compatible = "fsl-i2c";
|
||||
reg = <0x119100 0x100>;
|
||||
interrupts = <39 2 0 0>;
|
||||
dfsrr;
|
||||
};
|
||||
|
|
@ -0,0 +1,106 @@
|
|||
/*
|
||||
* QorIQ MPIC device tree stub [ controller @ offset 0x40000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
mpic: pic@40000 {
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <4>;
|
||||
reg = <0x40000 0x40000>;
|
||||
compatible = "fsl,mpic", "chrp,open-pic";
|
||||
device_type = "open-pic";
|
||||
clock-frequency = <0x0>;
|
||||
};
|
||||
|
||||
timer@41100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x41100 0x100 0x41300 4>;
|
||||
interrupts = <0 0 3 0
|
||||
1 0 3 0
|
||||
2 0 3 0
|
||||
3 0 3 0>;
|
||||
};
|
||||
|
||||
msi0: msi@41600 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41600 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe0 0 0 0
|
||||
0xe1 0 0 0
|
||||
0xe2 0 0 0
|
||||
0xe3 0 0 0
|
||||
0xe4 0 0 0
|
||||
0xe5 0 0 0
|
||||
0xe6 0 0 0
|
||||
0xe7 0 0 0>;
|
||||
};
|
||||
|
||||
msi1: msi@41800 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41800 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xe8 0 0 0
|
||||
0xe9 0 0 0
|
||||
0xea 0 0 0
|
||||
0xeb 0 0 0
|
||||
0xec 0 0 0
|
||||
0xed 0 0 0
|
||||
0xee 0 0 0
|
||||
0xef 0 0 0>;
|
||||
};
|
||||
|
||||
msi2: msi@41a00 {
|
||||
compatible = "fsl,mpic-msi";
|
||||
reg = <0x41a00 0x200>;
|
||||
msi-available-ranges = <0 0x100>;
|
||||
interrupts = <
|
||||
0xf0 0 0 0
|
||||
0xf1 0 0 0
|
||||
0xf2 0 0 0
|
||||
0xf3 0 0 0
|
||||
0xf4 0 0 0
|
||||
0xf5 0 0 0
|
||||
0xf6 0 0 0
|
||||
0xf7 0 0 0>;
|
||||
};
|
||||
|
||||
timer@42100 {
|
||||
compatible = "fsl,mpic-global-timer";
|
||||
reg = <0x42100 0x100 0x42300 4>;
|
||||
interrupts = <4 0 3 0
|
||||
5 0 3 0
|
||||
6 0 3 0
|
||||
7 0 3 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,68 @@
|
|||
/*
|
||||
* QorIQ RIO Message Unit device tree stub [ controller @ offset 0xd3000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
rmu: rmu@d3000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,srio-rmu";
|
||||
reg = <0xd3000 0x500>;
|
||||
ranges = <0x0 0xd3000 0x500>;
|
||||
|
||||
message-unit@0 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x0 0x100>;
|
||||
interrupts = <
|
||||
60 2 0 0 /* msg1_tx_irq */
|
||||
61 2 0 0>;/* msg1_rx_irq */
|
||||
};
|
||||
message-unit@100 {
|
||||
compatible = "fsl,srio-msg-unit";
|
||||
reg = <0x100 0x100>;
|
||||
interrupts = <
|
||||
62 2 0 0 /* msg2_tx_irq */
|
||||
63 2 0 0>;/* msg2_rx_irq */
|
||||
};
|
||||
doorbell-unit@400 {
|
||||
compatible = "fsl,srio-dbell-unit";
|
||||
reg = <0x400 0x80>;
|
||||
interrupts = <
|
||||
56 2 0 0 /* bell_outb_irq */
|
||||
57 2 0 0>;/* bell_inb_irq */
|
||||
};
|
||||
port-write-unit@4e0 {
|
||||
compatible = "fsl,srio-port-write-unit";
|
||||
reg = <0x4e0 0x20>;
|
||||
interrupts = <16 2 1 11>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* QorIQ SATAv2 device tree stub [ controller @ offset 0x220000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sata@220000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x220000 0x1000>;
|
||||
interrupts = <68 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/*
|
||||
* QorIQ SATAv2 device tree stub [ controller @ offset 0x221000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
sata@221000 {
|
||||
compatible = "fsl,pq-sata-v2";
|
||||
reg = <0x221000 0x1000>;
|
||||
interrupts = <69 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,100 @@
|
|||
/*
|
||||
* QorIQ Sec/Crypto 4.0 device tree stub [ controller @ offset 0x300000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,109 @@
|
|||
/*
|
||||
* QorIQ Sec/Crypto 4.1 device tree stub [ controller @ offset 0x300000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v4.1", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v4.1-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v4.1-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v4.1-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v4.1-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v4.1-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v4.1-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v4.1-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v4.1-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v4.1-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v4.1-mon", "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,109 @@
|
|||
/*
|
||||
* QorIQ Sec/Crypto 4.2 device tree stub [ controller @ offset 0x300000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
crypto: crypto@300000 {
|
||||
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x300000 0x10000>;
|
||||
ranges = <0 0x300000 0x10000>;
|
||||
interrupts = <92 2 0 0>;
|
||||
|
||||
sec_jr0: jr@1000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x1000 0x1000>;
|
||||
interrupts = <88 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr1: jr@2000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x2000 0x1000>;
|
||||
interrupts = <89 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr2: jr@3000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x3000 0x1000>;
|
||||
interrupts = <90 2 0 0>;
|
||||
};
|
||||
|
||||
sec_jr3: jr@4000 {
|
||||
compatible = "fsl,sec-v4.2-job-ring",
|
||||
"fsl,sec-v4.0-job-ring";
|
||||
reg = <0x4000 0x1000>;
|
||||
interrupts = <91 2 0 0>;
|
||||
};
|
||||
|
||||
rtic@6000 {
|
||||
compatible = "fsl,sec-v4.2-rtic",
|
||||
"fsl,sec-v4.0-rtic";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x6000 0x100>;
|
||||
ranges = <0x0 0x6100 0xe00>;
|
||||
|
||||
rtic_a: rtic-a@0 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x00 0x20 0x100 0x80>;
|
||||
};
|
||||
|
||||
rtic_b: rtic-b@20 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x20 0x20 0x200 0x80>;
|
||||
};
|
||||
|
||||
rtic_c: rtic-c@40 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x40 0x20 0x300 0x80>;
|
||||
};
|
||||
|
||||
rtic_d: rtic-d@60 {
|
||||
compatible = "fsl,sec-v4.2-rtic-memory",
|
||||
"fsl,sec-v4.0-rtic-memory";
|
||||
reg = <0x60 0x20 0x500 0x80>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sec_mon: sec_mon@314000 {
|
||||
compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
|
||||
reg = <0x314000 0x1000>;
|
||||
interrupts = <93 2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* QorIQ USB DR device tree stub [ controller @ offset 0x211000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
usb@211000 {
|
||||
compatible = "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
|
||||
reg = <0x211000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <45 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
* QorIQ USB Host device tree stub [ controller @ offset 0x210000 ]
|
||||
*
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
* * Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* * Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
* * Neither the name of Freescale Semiconductor nor the
|
||||
* names of its contributors may be used to endorse or promote products
|
||||
* derived from this software without specific prior written permission.
|
||||
*
|
||||
*
|
||||
* ALTERNATIVELY, this software may be distributed under the terms of the
|
||||
* GNU General Public License ("GPL") as published by the Free Software
|
||||
* Foundation, either version 2 of that License or (at your option) any
|
||||
* later version.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
|
||||
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||||
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
|
||||
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||||
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||||
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
||||
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||||
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
usb@210000 {
|
||||
compatible = "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
|
||||
reg = <0x210000 0x1000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <44 0x2 0 0>;
|
||||
};
|
||||
|
|
@ -339,7 +339,7 @@
|
|||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x2a 0x2>;
|
||||
|
|
@ -349,7 +349,7 @@
|
|||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x1c 0x2>;
|
||||
|
|
|
|||
|
|
@ -337,7 +337,7 @@
|
|||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x2a 0x2>;
|
||||
|
|
@ -347,7 +347,7 @@
|
|||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x1c 0x2>;
|
||||
|
|
|
|||
|
|
@ -337,7 +337,7 @@
|
|||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x2a 0x2>;
|
||||
|
|
@ -347,7 +347,7 @@
|
|||
serial1: serial@4600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4600 0x100>;
|
||||
clock-frequency = <0>;
|
||||
interrupts = <0x1c 0x2>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,227 @@
|
|||
/*
|
||||
* Device Tree for Klondike (APM8018X) board.
|
||||
*
|
||||
* Copyright (c) 2010, Applied Micro Circuits Corporation
|
||||
* Author: Tanmay Inamdar <tinamdar@apm.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of
|
||||
* the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
* MA 02111-1307 USA
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
model = "apm,klondike";
|
||||
compatible = "apm,klondike";
|
||||
dcr-parent = <&{/cpus/cpu@0}>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &EMAC0;
|
||||
ethernet1 = &EMAC1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
model = "PowerPC,apm8018x";
|
||||
reg = <0x00000000>;
|
||||
clock-frequency = <300000000>; /* Filled in by U-Boot */
|
||||
timebase-frequency = <300000000>; /* Filled in by U-Boot */
|
||||
i-cache-line-size = <32>;
|
||||
d-cache-line-size = <32>;
|
||||
i-cache-size = <16384>; /* 16 kB */
|
||||
d-cache-size = <16384>; /* 16 kB */
|
||||
dcr-controller;
|
||||
dcr-access-method = "native";
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */
|
||||
};
|
||||
|
||||
UIC0: interrupt-controller {
|
||||
compatible = "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <0>;
|
||||
dcr-reg = <0x0c0 0x010>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
UIC1: interrupt-controller1 {
|
||||
compatible = "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <1>;
|
||||
dcr-reg = <0x0d0 0x010>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
UIC2: interrupt-controller2 {
|
||||
compatible = "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <2>;
|
||||
dcr-reg = <0x0e0 0x010>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x0a 0x4 0x0b 0x4>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
UIC3: interrupt-controller3 {
|
||||
compatible = "ibm,uic";
|
||||
interrupt-controller;
|
||||
cell-index = <3>;
|
||||
dcr-reg = <0x0f0 0x010>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <2>;
|
||||
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
|
||||
interrupt-parent = <&UIC0>;
|
||||
};
|
||||
|
||||
plb {
|
||||
compatible = "ibm,plb4";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
clock-frequency = <0>; /* Filled in by U-Boot */
|
||||
|
||||
SDRAM0: memory-controller {
|
||||
compatible = "ibm,sdram-apm8018x";
|
||||
dcr-reg = <0x010 0x002>;
|
||||
};
|
||||
|
||||
MAL0: mcmal {
|
||||
compatible = "ibm,mcmal2";
|
||||
dcr-reg = <0x180 0x062>;
|
||||
num-tx-chans = <2>;
|
||||
num-rx-chans = <16>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-parent = <&UIC1>;
|
||||
interrupts = </*TXEOB*/ 0x6 0x4
|
||||
/*RXEOB*/ 0x7 0x4
|
||||
/*SERR*/ 0x1 0x4
|
||||
/*TXDE*/ 0x2 0x4
|
||||
/*RXDE*/ 0x3 0x4>;
|
||||
};
|
||||
|
||||
POB0: opb {
|
||||
compatible = "ibm,opb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x20000000 0x20000000 0x30000000
|
||||
0x50000000 0x50000000 0x10000000
|
||||
0x60000000 0x60000000 0x10000000
|
||||
0xFE000000 0xFE000000 0x00010000>;
|
||||
dcr-reg = <0x100 0x020>;
|
||||
clock-frequency = <300000000>; /* Filled in by U-Boot */
|
||||
|
||||
RGMII0: emac-rgmii@400a2000 {
|
||||
compatible = "ibm,rgmii";
|
||||
reg = <0x400a2000 0x00000010>;
|
||||
has-mdio;
|
||||
};
|
||||
|
||||
TAH0: emac-tah@400a3000 {
|
||||
compatible = "ibm,tah";
|
||||
reg = <0x400a3000 0x100>;
|
||||
};
|
||||
|
||||
TAH1: emac-tah@400a4000 {
|
||||
compatible = "ibm,tah";
|
||||
reg = <0x400a4000 0x100>;
|
||||
};
|
||||
|
||||
EMAC0: ethernet@400a0000 {
|
||||
compatible = "ibm,emac4", "ibm-emac4sync";
|
||||
interrupt-parent = <&EMAC0>;
|
||||
interrupts = <0x0>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-map = </*Status*/ 0x0 &UIC0 0x13 0x4>;
|
||||
reg = <0x400a0000 0x00000100>;
|
||||
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
||||
mal-device = <&MAL0>;
|
||||
mal-tx-channel = <0x0>;
|
||||
mal-rx-channel = <0x0>;
|
||||
cell-index = <0>;
|
||||
max-frame-size = <9000>;
|
||||
rx-fifo-size = <4096>;
|
||||
tx-fifo-size = <2048>;
|
||||
phy-mode = "rgmii";
|
||||
phy-address = <0x2>;
|
||||
turbo = "no";
|
||||
phy-map = <0x00000000>;
|
||||
rgmii-device = <&RGMII0>;
|
||||
rgmii-channel = <0>;
|
||||
tah-device = <&TAH0>;
|
||||
tah-channel = <0>;
|
||||
has-inverted-stacr-oc;
|
||||
has-new-stacr-staopc;
|
||||
};
|
||||
|
||||
EMAC1: ethernet@400a1000 {
|
||||
compatible = "ibm,emac4", "ibm-emac4sync";
|
||||
status = "disabled";
|
||||
interrupt-parent = <&EMAC1>;
|
||||
interrupts = <0x0>;
|
||||
#interrupt-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
#size-cells = <0>;
|
||||
interrupt-map = </*Status*/ 0x0 &UIC0 0x14 0x4>;
|
||||
reg = <0x400a1000 0x00000100>;
|
||||
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
||||
mal-device = <&MAL0>;
|
||||
mal-tx-channel = <1>;
|
||||
mal-rx-channel = <8>;
|
||||
cell-index = <1>;
|
||||
max-frame-size = <9000>;
|
||||
rx-fifo-size = <4096>;
|
||||
tx-fifo-size = <2048>;
|
||||
phy-mode = "rgmii";
|
||||
phy-address = <0x3>;
|
||||
turbo = "no";
|
||||
phy-map = <0x00000000>;
|
||||
rgmii-device = <&RGMII0>;
|
||||
rgmii-channel = <1>;
|
||||
tah-device = <&TAH1>;
|
||||
tah-channel = <0>;
|
||||
has-inverted-stacr-oc;
|
||||
has-new-stacr-staopc;
|
||||
mdio-device = <&EMAC0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = "/plb/opb/serial@50001000";
|
||||
};
|
||||
};
|
||||
|
|
@ -80,7 +80,7 @@
|
|||
serial0: serial@4500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x4500 0x100>;
|
||||
clock-frequency = <264000000>;
|
||||
interrupts = <9 0x8>;
|
||||
|
|
|
|||
|
|
@ -84,7 +84,7 @@ XXXX add flash parts, rtc, ??
|
|||
serial0: serial@80004500 {
|
||||
cell-index = <0>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x80004500 0x8>;
|
||||
clock-frequency = <97553800>;
|
||||
current-speed = <9600>;
|
||||
|
|
@ -95,7 +95,7 @@ XXXX add flash parts, rtc, ??
|
|||
serial1: serial@80004600 {
|
||||
cell-index = <1>;
|
||||
device_type = "serial";
|
||||
compatible = "ns16550";
|
||||
compatible = "fsl,ns16550", "ns16550";
|
||||
reg = <0x80004600 0x8>;
|
||||
clock-frequency = <97553800>;
|
||||
current-speed = <57600>;
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue