dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge commit 'v2.6.27-rc1' into for-linus

This commit is contained in:
Dmitry Torokhov 2008-08-08 16:21:02 -04:00
parent f2afa7711f 6e86841d05
commit e4ddcb0a6b
4010 changed files with 172705 additions and 98061 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
CREDITS
View File

@ -317,6 +317,14 @@ S: 2322 37th Ave SW
S: Seattle, Washington 98126-2010
S: USA
N: Muli Ben-Yehuda
E: mulix@mulix.org
E: muli@il.ibm.com
W: http://www.mulix.org
D: trident OSS sound driver, x86-64 dma-ops and Calgary IOMMU,
D: KVM and Xen bits and other misc. hackery.
S: Haifa, Israel
N: Johannes Berg
E: johannes@sipsolutions.net
W: http://johannes.sipsolutions.net/
@ -3344,8 +3352,7 @@ S: Spain
N: Linus Torvalds
E: torvalds@linux-foundation.org
D: Original kernel hacker
S: 12725 SW Millikan Way, Suite 400
S: Beaverton, Oregon 97005
S: Portland, Oregon 97005
S: USA
N: Marcelo Tosatti

2
Documentation/00-INDEX
View File

@ -361,8 +361,6 @@ telephony/
- directory with info on telephony (e.g. voice over IP) support.
time_interpolators.txt
- info on time interpolators.
tipar.txt
- information about Parallel link cable for Texas Instruments handhelds.
tty.txt
- guide to the locking policies of the tty layer.
uml/

20
Documentation/ABI/testing/sysfs-dev Normal file
View File

@ -0,0 +1,20 @@
What: /sys/dev
Date: April 2008
KernelVersion: 2.6.26
Contact: Dan Williams <dan.j.williams@intel.com>
Description: The /sys/dev tree provides a method to look up the sysfs
path for a device using the information returned from
stat(2). There are two directories, 'block' and 'char',
beneath /sys/dev containing symbolic links with names of
the form "<major>:<minor>". These links point to the
corresponding sysfs path for the given device.
Example:
$ readlink /sys/dev/block/8:32
../../block/sdc
Entries in /sys/dev/char and /sys/dev/block will be
dynamically created and destroyed as devices enter and
leave the system.
Users: mdadm <linux-raid@vger.kernel.org>

24
Documentation/ABI/testing/sysfs-devices-memory Normal file
View File

@ -0,0 +1,24 @@
What: /sys/devices/system/memory
Date: June 2008
Contact: Badari Pulavarty <pbadari@us.ibm.com>
Description:
The /sys/devices/system/memory contains a snapshot of the
internal state of the kernel memory blocks. Files could be
added or removed dynamically to represent hot-add/remove
operations.
Users: hotplug memory add/remove tools
https://w3.opensource.ibm.com/projects/powerpc-utils/
What: /sys/devices/system/memory/memoryX/removable
Date: June 2008
Contact: Badari Pulavarty <pbadari@us.ibm.com>
Description:
The file /sys/devices/system/memory/memoryX/removable
indicates whether this memory block is removable or not.
This is useful for a user-level agent to determine
identify removable sections of the memory before attempting
potentially expensive hot-remove memory operation
Users: hotplug memory remove tools
https://w3.opensource.ibm.com/projects/powerpc-utils/

6
Documentation/ABI/testing/sysfs-kernel-mm Normal file
View File

@ -0,0 +1,6 @@
What: /sys/kernel/mm
Date: July 2008
Contact: Nishanth Aravamudan <nacc@us.ibm.com>, VM maintainers
Description:
/sys/kernel/mm/ should contain any and all VM
related information in /sys/kernel/.

15
Documentation/ABI/testing/sysfs-kernel-mm-hugepages Normal file
View File

@ -0,0 +1,15 @@
What: /sys/kernel/mm/hugepages/
Date: June 2008
Contact: Nishanth Aravamudan <nacc@us.ibm.com>, hugetlb maintainers
Description:
/sys/kernel/mm/hugepages/ contains a number of subdirectories
of the form hugepages-<size>kB, where <size> is the page size
of the hugepages supported by the kernel/CPU combination.
Under these directories are a number of files:
nr_hugepages
nr_overcommit_hugepages
free_hugepages
surplus_hugepages
resv_hugepages
See Documentation/vm/hugetlbpage.txt for details.

38
Documentation/CodingStyle
View File

@ -474,25 +474,29 @@ make a good program).
So, you can either get rid of GNU emacs, or change it to use saner
values. To do the latter, you can stick the following in your .emacs file:
(defun linux-c-mode ()
"C mode with adjusted defaults for use with the Linux kernel."
(interactive)
(c-mode)
(c-set-style "K&R")
(setq tab-width 8)
(setq indent-tabs-mode t)
(setq c-basic-offset 8))
(defun c-lineup-arglist-tabs-only (ignored)
"Line up argument lists by tabs, not spaces"
(let* ((anchor (c-langelem-pos c-syntactic-element))
(column (c-langelem-2nd-pos c-syntactic-element))
(offset (- (1+ column) anchor))
(steps (floor offset c-basic-offset)))
(* (max steps 1)
c-basic-offset)))
This will define the M-x linux-c-mode command. When hacking on a
module, if you put the string -*- linux-c -*- somewhere on the first
two lines, this mode will be automatically invoked. Also, you may want
to add
(add-hook 'c-mode-hook
(lambda ()
(let ((filename (buffer-file-name)))
;; Enable kernel mode for the appropriate files
(when (and filename
(string-match "~/src/linux-trees" filename))
(setq indent-tabs-mode t)
(c-set-style "linux")
(c-set-offset 'arglist-cont-nonempty
'(c-lineup-gcc-asm-reg
c-lineup-arglist-tabs-only))))))
(setq auto-mode-alist (cons '("/usr/src/linux.*/.*\\.[ch]$" . linux-c-mode)
auto-mode-alist))
to your .emacs file if you want to have linux-c-mode switched on
automagically when you edit source files under /usr/src/linux.
This will make emacs go better with the kernel coding style for C
files below ~/src/linux-trees.
But even if you fail in getting emacs to do sane formatting, not
everything is lost: use "indent".

4
Documentation/DMA-API.txt
View File

@ -298,10 +298,10 @@ recommended that you never use these unless you really know what the
cache width is.
int
dma_mapping_error(dma_addr_t dma_addr)
dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
int
pci_dma_mapping_error(dma_addr_t dma_addr)
pci_dma_mapping_error(struct pci_dev *hwdev, dma_addr_t dma_addr)
In some circumstances dma_map_single and dma_map_page will fail to create
a mapping. A driver can check for these errors by testing the returned

9
Documentation/DMA-attributes.txt
View File

@ -22,3 +22,12 @@ ready and available in memory. The DMA of the "completion indication"
could race with data DMA. Mapping the memory used for completion
indications with DMA_ATTR_WRITE_BARRIER would prevent the race.
DMA_ATTR_WEAK_ORDERING
----------------------
DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
may be weakly ordered, that is that reads and writes may pass each other.
Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
those that do not will simply ignore the attribute and exhibit default
behavior.

38
Documentation/DocBook/gadget.tmpl
View File

@ -524,6 +524,44 @@ These utilities include endpoint autoconfiguration.
<!-- !Edrivers/usb/gadget/epautoconf.c -->
</sect1>
<sect1 id="composite"><title>Composite Device Framework</title>
<para>The core API is sufficient for writing drivers for composite
USB devices (with more than one function in a given configuration),
and also multi-configuration devices (also more than one function,
but not necessarily sharing a given configuration).
There is however an optional framework which makes it easier to
reuse and combine functions.
</para>
<para>Devices using this framework provide a <emphasis>struct
usb_composite_driver</emphasis>, which in turn provides one or
more <emphasis>struct usb_configuration</emphasis> instances.
Each such configuration includes at least one
<emphasis>struct usb_function</emphasis>, which packages a user
visible role such as "network link" or "mass storage device".
Management functions may also exist, such as "Device Firmware
Upgrade".
</para>
!Iinclude/linux/usb/composite.h
!Edrivers/usb/gadget/composite.c
</sect1>
<sect1 id="functions"><title>Composite Device Functions</title>
<para>At this writing, a few of the current gadget drivers have
been converted to this framework.
Near-term plans include converting all of them, except for "gadgetfs".
</para>
!Edrivers/usb/gadget/f_acm.c
!Edrivers/usb/gadget/f_serial.c
</sect1>
</chapter>
<chapter id="controllers"><title>Peripheral Controller Drivers</title>

57
Documentation/DocBook/kernel-locking.tmpl
View File

@ -219,10 +219,10 @@
</para>
<sect1 id="lock-intro">
<title>Three Main Types of Kernel Locks: Spinlocks, Mutexes and Semaphores</title>
<title>Two Main Types of Kernel Locks: Spinlocks and Mutexes</title>
<para>
There are three main types of kernel locks. The fundamental type
There are two main types of kernel locks. The fundamental type
is the spinlock
(<filename class="headerfile">include/asm/spinlock.h</filename>),
which is a very simple single-holder lock: if you can't get the
@ -239,14 +239,6 @@
can't sleep (see <xref linkend="sleeping-things"/>), and so have to
use a spinlock instead.
</para>
<para>
The third type is a semaphore
(<filename class="headerfile">include/linux/semaphore.h</filename>): it
can have more than one holder at any time (the number decided at
initialization time), although it is most commonly used as a
single-holder lock (a mutex). If you can't get a semaphore, your
task will be suspended and later on woken up - just like for mutexes.
</para>
<para>
Neither type of lock is recursive: see
<xref linkend="deadlock"/>.
@ -278,7 +270,7 @@
</para>
<para>
Semaphores still exist, because they are required for
Mutexes still exist, because they are required for
synchronization between <firstterm linkend="gloss-usercontext">user
contexts</firstterm>, as we will see below.
</para>
@ -289,18 +281,17 @@
<para>
If you have a data structure which is only ever accessed from
user context, then you can use a simple semaphore
(<filename>linux/linux/semaphore.h</filename>) to protect it. This
is the most trivial case: you initialize the semaphore to the number
of resources available (usually 1), and call
<function>down_interruptible()</function> to grab the semaphore, and
<function>up()</function> to release it. There is also a
<function>down()</function>, which should be avoided, because it
user context, then you can use a simple mutex
(<filename>include/linux/mutex.h</filename>) to protect it. This
is the most trivial case: you initialize the mutex. Then you can
call <function>mutex_lock_interruptible()</function> to grab the mutex,
and <function>mutex_unlock()</function> to release it. There is also a
<function>mutex_lock()</function>, which should be avoided, because it
will not return if a signal is received.
</para>
<para>
Example: <filename>linux/net/core/netfilter.c</filename> allows
Example: <filename>net/netfilter/nf_sockopt.c</filename> allows
registration of new <function>setsockopt()</function> and
<function>getsockopt()</function> calls, with
<function>nf_register_sockopt()</function>. Registration and
@ -515,7 +506,7 @@
<listitem>
<para>
If you are in a process context (any syscall) and want to
lock other process out, use a semaphore. You can take a semaphore
lock other process out, use a mutex. You can take a mutex
and sleep (<function>copy_from_user*(</function> or
<function>kmalloc(x,GFP_KERNEL)</function>).
</para>
@ -662,7 +653,7 @@
<entry>SLBH</entry>
<entry>SLBH</entry>
<entry>SLBH</entry>
<entry>DI</entry>
<entry>MLI</entry>
<entry>None</entry>
</row>
@ -692,8 +683,8 @@
<entry>spin_lock_bh</entry>
</row>
<row>
<entry>DI</entry>
<entry>down_interruptible</entry>
<entry>MLI</entry>
<entry>mutex_lock_interruptible</entry>
</row>
</tbody>
@ -1310,7 +1301,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
There is a coding bug where a piece of code tries to grab a
spinlock twice: it will spin forever, waiting for the lock to
be released (spinlocks, rwlocks and semaphores are not
be released (spinlocks, rwlocks and mutexes are not
recursive in Linux). This is trivial to diagnose: not a
stay-up-five-nights-talk-to-fluffy-code-bunnies kind of
problem.
@ -1335,7 +1326,7 @@ as Alan Cox says, <quote>Lock data, not code</quote>.
<para>
This complete lockup is easy to diagnose: on SMP boxes the
watchdog timer or compiling with <symbol>DEBUG_SPINLOCKS</symbol> set
watchdog timer or compiling with <symbol>DEBUG_SPINLOCK</symbol> set
(<filename>include/linux/spinlock.h</filename>) will show this up
immediately when it happens.
</para>
@ -1558,7 +1549,7 @@ the amount of locking which needs to be done.
<title>Read/Write Lock Variants</title>
<para>
Both spinlocks and semaphores have read/write variants:
Both spinlocks and mutexes have read/write variants:
<type>rwlock_t</type> and <structname>struct rw_semaphore</structname>.
These divide users into two classes: the readers and the writers. If
you are only reading the data, you can get a read lock, but to write to
@ -1681,7 +1672,7 @@ the amount of locking which needs to be done.
#include &lt;linux/slab.h&gt;
#include &lt;linux/string.h&gt;
+#include &lt;linux/rcupdate.h&gt;
#include &lt;linux/semaphore.h&gt;
#include &lt;linux/mutex.h&gt;
#include &lt;asm/errno.h&gt;
struct object
@ -1913,7 +1904,7 @@ machines due to caching.
</listitem>
<listitem>
<para>
<function> put_user()</function>
<function>put_user()</function>
</para>
</listitem>
</itemizedlist>
@ -1927,13 +1918,13 @@ machines due to caching.
<listitem>
<para>
<function>down_interruptible()</function> and
<function>down()</function>
<function>mutex_lock_interruptible()</function> and
<function>mutex_lock()</function>
</para>
<para>
There is a <function>down_trylock()</function> which can be
There is a <function>mutex_trylock()</function> which can be
used inside interrupt context, as it will not sleep.
<function>up()</function> will also never sleep.
<function>mutex_unlock()</function> will also never sleep.
</para>
</listitem>
</itemizedlist>
@ -2023,7 +2014,7 @@ machines due to caching.
<para>
Prior to 2.5, or when <symbol>CONFIG_PREEMPT</symbol> is
unset, processes in user context inside the kernel would not
preempt each other (ie. you had that CPU until you have it up,
preempt each other (ie. you had that CPU until you gave it up,
except for interrupts). With the addition of
<symbol>CONFIG_PREEMPT</symbol> in 2.5.4, this changed: when
in user context, higher priority tasks can "cut in": spinlocks

4
Documentation/DocBook/procfs-guide.tmpl
View File

@ -29,12 +29,12 @@
<revhistory>
<revision>
<revnumber>1.0&nbsp;</revnumber>
<revnumber>1.0</revnumber>
<date>May 30, 2001</date>
<revremark>Initial revision posted to linux-kernel</revremark>
</revision>
<revision>
<revnumber>1.1&nbsp;</revnumber>
<revnumber>1.1</revnumber>
<date>June 3, 2001</date>
<revremark>Revised after comments from linux-kernel</revremark>
</revision>

63
Documentation/DocBook/uio-howto.tmpl
View File

@ -21,6 +21,18 @@
</affiliation>
</author>
<copyright>
<year>2006-2008</year>
<holder>Hans-Jürgen Koch.</holder>
</copyright>
<legalnotice>
<para>
This documentation is Free Software licensed under the terms of the
GPL version 2.
</para>
</legalnotice>
<pubdate>2006-12-11</pubdate>
<abstract>
@ -29,6 +41,12 @@
</abstract>
<revhistory>
<revision>
<revnumber>0.5</revnumber>
<date>2008-05-22</date>
<authorinitials>hjk</authorinitials>
<revremark>Added description of write() function.</revremark>
</revision>
<revision>
<revnumber>0.4</revnumber>
<date>2007-11-26</date>
@ -57,20 +75,9 @@
</bookinfo>
<chapter id="aboutthisdoc">
<?dbhtml filename="about.html"?>
<?dbhtml filename="aboutthis.html"?>
<title>About this document</title>
<sect1 id="copyright">
<?dbhtml filename="copyright.html"?>
<title>Copyright and License</title>
<para>
Copyright (c) 2006 by Hans-Jürgen Koch.</para>
<para>
This documentation is Free Software licensed under the terms of the
GPL version 2.
</para>
</sect1>
<sect1 id="translations">
<?dbhtml filename="translations.html"?>
<title>Translations</title>
@ -189,6 +196,30 @@ interested in translating it, please email me
represents the total interrupt count. You can use this number
to figure out if you missed some interrupts.
</para>
<para>
For some hardware that has more than one interrupt source internally,
but not separate IRQ mask and status registers, there might be
situations where userspace cannot determine what the interrupt source
was if the kernel handler disables them by writing to the chip's IRQ
register. In such a case, the kernel has to disable the IRQ completely
to leave the chip's register untouched. Now the userspace part can
determine the cause of the interrupt, but it cannot re-enable
interrupts. Another cornercase is chips where re-enabling interrupts
is a read-modify-write operation to a combined IRQ status/acknowledge
register. This would be racy if a new interrupt occurred
simultaneously.
</para>
<para>
To address these problems, UIO also implements a write() function. It
is normally not used and can be ignored for hardware that has only a
single interrupt source or has separate IRQ mask and status registers.
If you need it, however, a write to <filename>/dev/uioX</filename>
will call the <function>irqcontrol()</function> function implemented
by the driver. You have to write a 32-bit value that is usually either
0 or 1 to disable or enable interrupts. If a driver does not implement
<function>irqcontrol()</function>, <function>write()</function> will
return with <varname>-ENOSYS</varname>.
</para>
<para>
To handle interrupts properly, your custom kernel module can
@ -362,6 +393,14 @@ device is actually used.
<function>open()</function>, you will probably also want a custom
<function>release()</function> function.
</para></listitem>
<listitem><para>
<varname>int (*irqcontrol)(struct uio_info *info, s32 irq_on)
</varname>: Optional. If you need to be able to enable or disable
interrupts from userspace by writing to <filename>/dev/uioX</filename>,
you can implement this function. The parameter <varname>irq_on</varname>
will be 0 to disable interrupts and 1 to enable them.
</para></listitem>
</itemizedlist>
<para>

2
Documentation/HOWTO
View File

@ -358,7 +358,7 @@ Here is a list of some of the different kernel trees available:
- pcmcia, Dominik Brodowski <linux@dominikbrodowski.net>
git.kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
- SCSI, James Bottomley <James.Bottomley@SteelEye.com>
- SCSI, James Bottomley <James.Bottomley@hansenpartnership.com>
git.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
- x86, Ingo Molnar <mingo@elte.hu>

4
Documentation/Intel-IOMMU.txt
View File

@ -48,7 +48,7 @@ IOVA generation is pretty generic. We used the same technique as vmalloc()
but these are not global address spaces, but separate for each domain.
Different DMA engines may support different number of domains.
We also allocate gaurd pages with each mapping, so we can attempt to catch
We also allocate guard pages with each mapping, so we can attempt to catch
any overflow that might happen.
@ -112,4 +112,4 @@ TBD
- For compatibility testing, could use unity map domain for all devices, just
provide a 1-1 for all useful memory under a single domain for all devices.
- API for paravirt ops for abstracting functionlity for VMM folks.
- API for paravirt ops for abstracting functionality for VMM folks.

26
Documentation/SubmittingPatches
View File

@ -528,7 +528,33 @@ See more details on the proper patch format in the following
references.
16) Sending "git pull" requests (from Linus emails)
Please write the git repo address and branch name alone on the same line
so that I can't even by mistake pull from the wrong branch, and so
that a triple-click just selects the whole thing.
So the proper format is something along the lines of:
"Please pull from
git://jdelvare.pck.nerim.net/jdelvare-2.6 i2c-for-linus
to get these changes:"
so that I don't have to hunt-and-peck for the address and inevitably
get it wrong (actually, I've only gotten it wrong a few times, and
checking against the diffstat tells me when I get it wrong, but I'm
just a lot more comfortable when I don't have to "look for" the right
thing to pull, and double-check that I have the right branch-name).
Please use "git diff -M --stat --summary" to generate the diffstat:
the -M enables rename detection, and the summary enables a summary of
new/deleted or renamed files.
With rename detection, the statistics are rather different [...]
because git will notice that a fair number of the changes are renames.
-----------------------------------
SECTION 2 - HINTS, TIPS, AND TRICKS

11
Documentation/accounting/delay-accounting.txt
View File

@ -11,6 +11,7 @@ the delays experienced by a task while
a) waiting for a CPU (while being runnable)
b) completion of synchronous block I/O initiated by the task
c) swapping in pages
d) memory reclaim
and makes these statistics available to userspace through
the taskstats interface.
@ -41,7 +42,7 @@ this structure. See
include/linux/taskstats.h
for a description of the fields pertaining to delay accounting.
It will generally be in the form of counters returning the cumulative
delay seen for cpu, sync block I/O, swapin etc.
delay seen for cpu, sync block I/O, swapin, memory reclaim etc.
Taking the difference of two successive readings of a given
counter (say cpu_delay_total) for a task will give the delay
@ -94,7 +95,9 @@ CPU count real total virtual total delay total
7876 92005750 100000000 24001500
IO count delay total
0 0
MEM count delay total
SWAP count delay total
0 0
RECLAIM count delay total
0 0
Get delays seen in executing a given simple command
@ -108,5 +111,7 @@ CPU count real total virtual total delay total
6 4000250 4000000 0
IO count delay total
0 0
MEM count delay total
SWAP count delay total
0 0
RECLAIM count delay total
0 0

8
Documentation/accounting/getdelays.c
View File

@ -196,14 +196,18 @@ void print_delayacct(struct taskstats *t)
" %15llu%15llu%15llu%15llu\n"
"IO %15s%15s\n"
" %15llu%15llu\n"
"MEM %15s%15s\n"
"SWAP %15s%15s\n"
" %15llu%15llu\n"
"RECLAIM %12s%15s\n"
" %15llu%15llu\n",
"count", "real total", "virtual total", "delay total",
t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
t->cpu_delay_total,
"count", "delay total",
t->blkio_count, t->blkio_delay_total,
"count", "delay total", t->swapin_count, t->swapin_delay_total);
"count", "delay total", t->swapin_count, t->swapin_delay_total,
"count", "delay total",
t->freepages_count, t->freepages_delay_total);
}
void task_context_switch_counts(struct taskstats *t)

9
Documentation/accounting/taskstats-struct.txt
View File

@ -6,7 +6,7 @@ This document contains an explanation of the struct taskstats fields.
There are three different groups of fields in the struct taskstats:
1) Common and basic accounting fields
If CONFIG_TASKSTATS is set, the taskstats inteface is enabled and
If CONFIG_TASKSTATS is set, the taskstats interface is enabled and
the common fields and basic accounting fields are collected for
delivery at do_exit() of a task.
2) Delay accounting fields
@ -26,6 +26,8 @@ There are three different groups of fields in the struct taskstats:
5) Time accounting for SMT machines
6) Extended delay accounting fields for memory reclaim
Future extension should add fields to the end of the taskstats struct, and
should not change the relative position of each field within the struct.
@ -170,4 +172,9 @@ struct taskstats {
__u64 ac_utimescaled; /* utime scaled on frequency etc */
__u64 ac_stimescaled; /* stime scaled on frequency etc */
__u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */
6) Extended delay accounting fields for memory reclaim
/* Delay waiting for memory reclaim */
__u64 freepages_count;
__u64 freepages_delay_total;
}

10
Documentation/arm/Interrupts
View File

@ -138,14 +138,8 @@ So, what's changed?
Set active the IRQ edge(s)/level. This replaces the
SA1111 INTPOL manipulation, and the set_GPIO_IRQ_edge()
function. Type should be one of the following:
#define IRQT_NOEDGE (0)
#define IRQT_RISING (__IRQT_RISEDGE)
#define IRQT_FALLING (__IRQT_FALEDGE)
#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE)
#define IRQT_LOW (__IRQT_LOWLVL)
#define IRQT_HIGH (__IRQT_HIGHLVL)
function. Type should be one of IRQ_TYPE_xxx defined in
<linux/irq.h>
3. set_GPIO_IRQ_edge() is obsolete, and should be replaced by set_irq_type.

67
Documentation/bt8xxgpio.txt Normal file
View File

@ -0,0 +1,67 @@
===============================================================
== BT8XXGPIO driver ==
== ==
== A driver for a selfmade cheap BT8xx based PCI GPIO-card ==
== ==
== For advanced documentation, see ==
== http://www.bu3sch.de/btgpio.php ==
===============================================================
A generic digital 24-port PCI GPIO card can be built out of an ordinary
Brooktree bt848, bt849, bt878 or bt879 based analog TV tuner card. The
Brooktree chip is used in old analog Hauppauge WinTV PCI cards. You can easily
find them used for low prices on the net.
The bt8xx chip does have 24 digital GPIO ports.
These ports are accessible via 24 pins on the SMD chip package.
==============================================
== How to physically access the GPIO pins ==
==============================================
The are several ways to access these pins. One might unsolder the whole chip
and put it on a custom PCI board, or one might only unsolder each individual
GPIO pin and solder that to some tiny wire. As the chip package really is tiny
there are some advanced soldering skills needed in any case.
The physical pinouts are drawn in the following ASCII art.
The GPIO pins are marked with G00-G23
G G G G G G G G G G G G G G G G G G
0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
---------------------------------------------------------------------------
--| ^ ^ |--
--| pin 86 pin 67 |--
--| |--
--| pin 61 > |-- G18
--| |-- G19
--| |-- G20
--| |-- G21
--| |-- G22
--| pin 56 > |-- G23
--| |--
--| Brooktree 878/879 |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| |--
--| O |--
--| |--
---------------------------------------------------------------------------
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
^
This is pin 1

3
Documentation/controllers/memory.txt
View File

@ -242,8 +242,7 @@ rmdir() if there are no tasks.
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
3. Teach controller to account for shared-pages
4. Start reclamation when the limit is lowered
5. Start reclamation in the background when the limit is
4. Start reclamation in the background when the limit is
not yet hit but the usage is getting closer
Summary

2
Documentation/cpu-freq/governors.txt
View File

@ -122,7 +122,7 @@ around '10000' or more.
show_sampling_rate_(min|max): the minimum and maximum sampling rates
available that you may set 'sampling_rate' to.
up_threshold: defines what the average CPU usaged between the samplings
up_threshold: defines what the average CPU usage between the samplings
of 'sampling_rate' needs to be for the kernel to make a decision on
whether it should increase the frequency. For example when it is set
to its default value of '80' it means that between the checking

153
Documentation/edac.txt
View File

@ -222,74 +222,9 @@ both csrow2 and csrow3 are populated, this indicates a dual ranked
set of DIMMs for channels 0 and 1.
Within each of the 'mc','mcX' and 'csrowX' directories are several
Within each of the 'mcX' and 'csrowX' directories are several
EDAC control and attribute files.
============================================================================
DIRECTORY 'mc'
In directory 'mc' are EDAC system overall control and attribute files:
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: panic_on_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: log_ue=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: log_ce=[0|1]
RUN TIME: echo "1" >/sys/devices/system/edac/mc/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/edac_mc_poll_msec
============================================================================
'mcX' DIRECTORIES
@ -392,7 +327,7 @@ Sdram memory scrubbing rate:
'sdram_scrub_rate'
Read/Write attribute file that controls memory scrubbing. The scrubbing
rate is set by writing a minimum bandwith in bytes/sec to the attribute
rate is set by writing a minimum bandwidth in bytes/sec to the attribute
file. The rate will be translated to an internal value that gives at
least the specified rate.
@ -537,7 +472,6 @@ Channel 1 DIMM Label control file:
motherboard specific and determination of this information
must occur in userland at this time.
============================================================================
SYSTEM LOGGING
@ -570,7 +504,6 @@ error type, a notice of "no info" and then an optional,
driver-specific error message.
============================================================================
PCI Bus Parity Detection
@ -604,6 +537,74 @@ Enable/Disable PCI Parity checking control file:
echo "0" >/sys/devices/system/edac/pci/check_pci_parity
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
============================================================================
MODULE PARAMETERS
Panic on UE control file:
'edac_mc_panic_on_ue'
An uncorrectable error will cause a machine panic. This is usually
desirable. It is a bad idea to continue when an uncorrectable error
occurs - it is indeterminate what was uncorrected and the operating
system context might be so mangled that continuing will lead to further
corruption. If the kernel has MCE configured, then EDAC will never
notice the UE.
LOAD TIME: module/kernel parameter: edac_mc_panic_on_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
Log UE control file:
'edac_mc_log_ue'
Generate kernel messages describing uncorrectable errors. These errors
are reported through the system message log system. UE statistics
will be accumulated even when UE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ue=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ue
Log CE control file:
'edac_mc_log_ce'
Generate kernel messages describing correctable errors. These
errors are reported through the system message log system.
CE statistics will be accumulated even when CE logging is disabled.
LOAD TIME: module/kernel parameter: edac_mc_log_ce=[0|1]
RUN TIME: echo "1" > /sys/module/edac_core/parameters/edac_mc_log_ce
Polling period control file:
'edac_mc_poll_msec'
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: edac_mc_poll_msec=[0|1]
RUN TIME: echo "1000" > /sys/module/edac_core/parameters/edac_mc_poll_msec
Panic on PCI PARITY Error:
@ -614,21 +615,13 @@ Panic on PCI PARITY Error:
error has been detected.
module/kernel parameter: panic_on_pci_parity=[0|1]
module/kernel parameter: edac_panic_on_pci_pe=[0|1]
Enable:
echo "1" >/sys/devices/system/edac/pci/panic_on_pci_parity
echo "1" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe
Disable:
echo "0" >/sys/devices/system/edac/pci/panic_on_pci_parity
Parity Count:
'pci_parity_count'
This attribute file will display the number of parity errors that
have been detected.
echo "0" > /sys/module/edac_core/parameters/edac_panic_on_pci_pe

131
Documentation/fb/sh7760fb.txt Normal file
View File

@ -0,0 +1,131 @@
SH7760/SH7763 integrated LCDC Framebuffer driver
================================================
0. Overwiew
-----------
The SH7760/SH7763 have an integrated LCD Display controller (LCDC) which
supports (in theory) resolutions ranging from 1x1 to 1024x1024,
with color depths ranging from 1 to 16 bits, on STN, DSTN and TFT Panels.
Caveats:
* Framebuffer memory must be a large chunk allocated at the top
of Area3 (HW requirement). Because of this requirement you should NOT
make the driver a module since at runtime it may become impossible to
get a large enough contiguous chunk of memory.
* The driver does not support changing resolution while loaded
(displays aren't hotpluggable anyway)
* Heavy flickering may be observed
a) if you're using 15/16bit color modes at >= 640x480 px resolutions,
b) during PCMCIA (or any other slow bus) activity.
* Rotation works only 90degress clockwise, and only if horizontal
resolution is <= 320 pixels.
files: drivers/video/sh7760fb.c
include/asm-sh/sh7760fb.h
Documentation/fb/sh7760fb.txt
1. Platform setup
-----------------
SH7760:
Video data is fetched via the DMABRG DMA engine, so you have to
configure the SH DMAC for DMABRG mode (write 0x94808080 to the
DMARSRA register somewhere at boot).
PFC registers PCCR and PCDR must be set to peripheral mode.
(write zeros to both).
The driver does NOT do the above for you since board setup is, well, job
of the board setup code.
2. Panel definitions
--------------------
The LCDC must explicitly be told about the type of LCD panel
attached. Data must be wrapped in a "struct sh7760fb_platdata" and
passed to the driver as platform_data.
Suggest you take a closer look at the SH7760 Manual, Section 30.
(http://documentation.renesas.com/eng/products/mpumcu/e602291_sh7760.pdf)
The following code illustrates what needs to be done to
get the framebuffer working on a 640x480 TFT:
====================== cut here ======================================
#include <linux/fb.h>
#include <asm/sh7760fb.h>
/*
* NEC NL6440bc26-01 640x480 TFT
* dotclock 25175 kHz
* Xres 640 Yres 480
* Htotal 800 Vtotal 525
* HsynStart 656 VsynStart 490
* HsynLenn 30 VsynLenn 2
*
* The linux framebuffer layer does not use the syncstart/synclen
* values but right/left/upper/lower margin values. The comments
* for the x_margin explain how to calculate those from given
* panel sync timings.
*/
static struct fb_videomode nl6448bc26 = {
.name = "NL6448BC26",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683, /* in picoseconds! */
.hsync_len = 30,
.vsync_len = 2,
.left_margin = 114, /* HTOT - (HSYNSLEN + HSYNSTART) */
.right_margin = 16, /* HSYNSTART - XRES */
.upper_margin = 33, /* VTOT - (VSYNLEN + VSYNSTART) */
.lower_margin = 10, /* VSYNSTART - YRES */
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED,
.flag = 0,
};
static struct sh7760fb_platdata sh7760fb_nl6448 = {
.def_mode = &nl6448bc26,
.ldmtr = LDMTR_TFT_COLOR_16, /* 16bit TFT panel */
.lddfr = LDDFR_8BPP, /* we want 8bit output */
.ldpmmr = 0x0070,
.ldpspr = 0x0500,
.ldaclnr = 0,
.ldickr = LDICKR_CLKSRC(LCDC_CLKSRC_EXTERNAL) |
LDICKR_CLKDIV(1),
.rotate = 0,
.novsync = 1,
.blank = NULL,
};
/* SH7760:
* 0xFE300800: 256 * 4byte xRGB palette ram
* 0xFE300C00: 42 bytes ctrl registers
*/
static struct resource sh7760_lcdc_res[] = {
[0] = {
.start = 0xFE300800,
.end = 0xFE300CFF,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 65,
.end = 65,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sh7760_lcdc_dev = {
.dev = {
.platform_data = &sh7760fb_nl6448,
},
.name = "sh7760-lcdc",
.id = -1,
.resource = sh7760_lcdc_res,
.num_resources = ARRAY_SIZE(sh7760_lcdc_res),
};
====================== cut here ======================================

44
Documentation/fb/tridentfb.txt
View File

@ -3,11 +3,25 @@ Tridentfb is a framebuffer driver for some Trident chip based cards.
The following list of chips is thought to be supported although not all are
tested:
those from the Image series with Cyber in their names - accelerated
those with Blade in their names (Blade3D,CyberBlade...) - accelerated
the newer CyberBladeXP family - nonaccelerated
those from the TGUI series 9440/96XX and with Cyber in their names
those from the Image series and with Cyber in their names
those with Blade in their names (Blade3D,CyberBlade...)
the newer CyberBladeXP family
Only PCI/AGP based cards are supported, none of the older Tridents.
All families are accelerated. Only PCI/AGP based cards are supported,
none of the older Tridents.
The driver supports 8, 16 and 32 bits per pixel depths.
The TGUI family requires a line length to be power of 2 if acceleration
is enabled. This means that range of possible resolutions and bpp is
limited comparing to the range if acceleration is disabled (see list
of parameters below).
Known bugs:
1. The driver randomly locks up on 3DImage975 chip with acceleration
enabled. The same happens in X11 (Xorg).
2. The ramdac speeds require some more fine tuning. It is possible to
switch resolution which the chip does not support at some depths for
older chips.
How to use it?
==============
@ -17,12 +31,11 @@ video=tridentfb
The parameters for tridentfb are concatenated with a ':' as in this example.
video=tridentfb:800x600,bpp=16,noaccel
video=tridentfb:800x600-16@75,noaccel
The second level parameters that tridentfb understands are:
noaccel - turns off acceleration (when it doesn't work for your card)
accel - force text acceleration (for boards which by default are noacceled)
fp - use flat panel related stuff
crt - assume monitor is present instead of fp
@ -31,21 +44,24 @@ center - for flat panels and resolutions smaller than native size center the
image, otherwise use
stretch
memsize - integer value in Kb, use if your card's memory size is misdetected.
memsize - integer value in KB, use if your card's memory size is misdetected.
look at the driver output to see what it says when initializing.
memdiff - integer value in Kb,should be nonzero if your card reports
more memory than it actually has.For instance mine is 192K less than
memdiff - integer value in KB, should be nonzero if your card reports
more memory than it actually has. For instance mine is 192K less than
detection says in all three BIOS selectable situations 2M, 4M, 8M.
Only use if your video memory is taken from main memory hence of
configurable size.Otherwise use memsize.
If in some modes which barely fit the memory you see garbage at the bottom
this might help by not letting change to that mode anymore.
configurable size. Otherwise use memsize.
If in some modes which barely fit the memory you see garbage
at the bottom this might help by not letting change to that mode
anymore.
nativex - the width in pixels of the flat panel.If you know it (usually 1024
800 or 1280) and it is not what the driver seems to detect use it.
bpp - bits per pixel (8,16 or 32)
mode - a mode name like 800x600 (as described in Documentation/fb/modedb.txt)
bpp - bits per pixel (8,16 or 32)
mode - a mode name like 800x600-8@75 as described in
Documentation/fb/modedb.txt
Using insane values for the above parameters will probably result in driver
misbehaviour so take care(for instance memsize=12345678 or memdiff=23784 or

60
Documentation/feature-removal-schedule.txt
View File

@ -47,6 +47,30 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
What: old tuner-3036 i2c driver
When: 2.6.28
Why: This driver is for VERY old i2c-over-parallel port teletext receiver
boxes. Rather then spending effort on converting this driver to V4L2,
and since it is extremely unlikely that anyone still uses one of these
devices, it was decided to drop it.
Who: Hans Verkuil <hverkuil@xs4all.nl>
Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
What: V4L2 dpc7146 driver
When: 2.6.28
Why: Old driver for the dpc7146 demonstration board that is no longer
relevant. The last time this was tested on actual hardware was
probably around 2002. Since this is a driver for a demonstration
board the decision was made to remove it rather than spending a
lot of effort continually updating this driver to stay in sync
with the latest internal V4L2 or I2C API.
Who: Hans Verkuil <hverkuil@xs4all.nl>
Mauro Carvalho Chehab <mchehab@infradead.org>
---------------------------
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
@ -138,24 +162,6 @@ Who: Kay Sievers <kay.sievers@suse.de>
---------------------------
What: find_task_by_pid
When: 2.6.26
Why: With pid namespaces, calling this funciton will return the
wrong task when called from inside a namespace.
The best way to save a task pid and find a task by this
pid later, is to find this task's struct pid pointer (or get
it directly from the task) and call pid_task() later.
If someone really needs to get a task by its pid_t, then
he most likely needs the find_task_by_vpid() to get the
task from the same namespace as the current task is in, but
this may be not so in general.
Who: Pavel Emelyanov <xemul@openvz.org>
---------------------------
What: ACPI procfs interface
When: July 2008
Why: ACPI sysfs conversion should be finished by January 2008.
@ -300,14 +306,6 @@ Who: ocfs2-devel@oss.oracle.com
---------------------------
What: asm/semaphore.h
When: 2.6.26
Why: Implementation became generic; users should now include
linux/semaphore.h instead.
Who: Matthew Wilcox <willy@linux.intel.com>
---------------------------
What: SCTP_GET_PEER_ADDRS_NUM_OLD, SCTP_GET_PEER_ADDRS_OLD,
SCTP_GET_LOCAL_ADDRS_NUM_OLD, SCTP_GET_LOCAL_ADDRS_OLD
When: June 2009
@ -336,3 +334,13 @@ When: After the only user (hal) has seen a release with the patches
Why: Over 1K .text/.data size reduction, data is available in other
ways (ioctls)
Who: Johannes Berg <johannes@sipsolutions.net>
---------------------------
What: CONFIG_NF_CT_ACCT
When: 2.6.29
Why: Accounting can now be enabled/disabled without kernel recompilation.
Currently used only to set a default value for a feature that is also
controlled by a kernel/module/sysfs/sysctl parameter.
Who: Krzysztof Piotr Oledzki <ole@ans.pl>

7
Documentation/filesystems/Locking
View File

@ -510,6 +510,7 @@ prototypes:
void (*close)(struct vm_area_struct*);
int (*fault)(struct vm_area_struct*, struct vm_fault *);
int (*page_mkwrite)(struct vm_area_struct *, struct page *);
int (*access)(struct vm_area_struct *, unsigned long, void*, int, int);
locking rules:
BKL mmap_sem PageLocked(page)
@ -517,6 +518,7 @@ open: no yes
close: no yes
fault: no yes
page_mkwrite: no yes no
access: no yes
->page_mkwrite() is called when a previously read-only page is
about to become writeable. The file system is responsible for
@ -525,6 +527,11 @@ taking to lock out truncate, the page range should be verified to be
within i_size. The page mapping should also be checked that it is not
NULL.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
/proc/pid/mem or ptrace. This function is needed only for
VM_IO | VM_PFNMAP VMAs.
================================================================================
Dubious stuff

10
Documentation/filesystems/bfs.txt
View File

@ -26,11 +26,11 @@ You can simplify mounting by just typing:
this will allocate the first available loopback device (and load loop.o
kernel module if necessary) automatically. If the loopback driver is not
loaded automatically, make sure that your kernel is compiled with kmod
support (CONFIG_KMOD) enabled. Beware that umount will not
deallocate /dev/loopN device if /etc/mtab file on your system is a
symbolic link to /proc/mounts. You will need to do it manually using
"-d" switch of losetup(8). Read losetup(8) manpage for more info.
loaded automatically, make sure that you have compiled the module and
that modprobe is functioning. Beware that umount will not deallocate
/dev/loopN device if /etc/mtab file on your system is a symbolic link to
/proc/mounts. You will need to do it manually using "-d" switch of
losetup(8). Read losetup(8) manpage for more info.
To create the BFS image under UnixWare you need to find out first which
slice contains it. The command prtvtoc(1M) is your friend:

106
Documentation/filesystems/omfs.txt Normal file
View File

@ -0,0 +1,106 @@
Optimized MPEG Filesystem (OMFS)
Overview
========
OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR
and Rio Karma MP3 player. The filesystem is extent-based, utilizing
block sizes from 2k to 8k, with hash-based directories. This
filesystem driver may be used to read and write disks from these
devices.
Note, it is not recommended that this FS be used in place of a general
filesystem for your own streaming media device. Native Linux filesystems
will likely perform better.
More information is available at:
http://linux-karma.sf.net/
Various utilities, including mkomfs and omfsck, are included with
omfsprogs, available at:
http://bobcopeland.com/karma/
Instructions are included in its README.
Options
=======
OMFS supports the following mount-time options:
uid=n - make all files owned by specified user
gid=n - make all files owned by specified group
umask=xxx - set permission umask to xxx
fmask=xxx - set umask to xxx for files
dmask=xxx - set umask to xxx for directories
Disk format
===========
OMFS discriminates between "sysblocks" and normal data blocks. The sysblock
group consists of super block information, file metadata, directory structures,
and extents. Each sysblock has a header containing CRCs of the entire
sysblock, and may be mirrored in successive blocks on the disk. A sysblock may
have a smaller size than a data block, but since they are both addressed by the
same 64-bit block number, any remaining space in the smaller sysblock is
unused.
Sysblock header information:
struct omfs_header {
__be64 h_self; /* FS block where this is located */
__be32 h_body_size; /* size of useful data after header */
__be16 h_crc; /* crc-ccitt of body_size bytes */
char h_fill1[2];
u8 h_version; /* version, always 1 */
char h_type; /* OMFS_INODE_X */
u8 h_magic; /* OMFS_IMAGIC */
u8 h_check_xor; /* XOR of header bytes before this */
__be32 h_fill2;
};
Files and directories are both represented by omfs_inode:
struct omfs_inode {
struct omfs_header i_head; /* header */
__be64 i_parent; /* parent containing this inode */
__be64 i_sibling; /* next inode in hash bucket */
__be64 i_ctime; /* ctime, in milliseconds */
char i_fill1[35];
char i_type; /* OMFS_[DIR,FILE] */
__be32 i_fill2;
char i_fill3[64];
char i_name[OMFS_NAMELEN]; /* filename */
__be64 i_size; /* size of file, in bytes */
};
Directories in OMFS are implemented as a large hash table. Filenames are
hashed then prepended into the bucket list beginning at OMFS_DIR_START.
Lookup requires hashing the filename, then seeking across i_sibling pointers
until a match is found on i_name. Empty buckets are represented by block
pointers with all-1s (~0).
A file is an omfs_inode structure followed by an extent table beginning at
OMFS_EXTENT_START:
struct omfs_extent_entry {
__be64 e_cluster; /* start location of a set of blocks */
__be64 e_blocks; /* number of blocks after e_cluster */
};
struct omfs_extent {
__be64 e_next; /* next extent table location */
__be32 e_extent_count; /* total # extents in this table */
__be32 e_fill;
struct omfs_extent_entry e_entry; /* start of extent entries */
};
Each extent holds the block offset followed by number of blocks allocated to
the extent. The final extent in each table is a terminator with e_cluster
being ~0 and e_blocks being ones'-complement of the total number of blocks
in the table.
If this table overflows, a continuation inode is written and pointed to by
e_next. These have a header but lack the rest of the inode structure.

48
Documentation/filesystems/proc.txt
View File

@ -296,6 +296,7 @@ Table 1-4: Kernel info in /proc
uptime System uptime
version Kernel version
video bttv info of video resources (2.4)
vmallocinfo Show vmalloced areas
..............................................................................
You can, for example, check which interrupts are currently in use and what
@ -557,6 +558,49 @@ VmallocTotal: total size of vmalloc memory area
VmallocUsed: amount of vmalloc area which is used
VmallocChunk: largest contigious block of vmalloc area which is free
..............................................................................
vmallocinfo:
Provides information about vmalloced/vmaped areas. One line per area,
containing the virtual address range of the area, size in bytes,
caller information of the creator, and optional information depending
on the kind of area :
pages=nr number of pages
phys=addr if a physical address was specified
ioremap I/O mapping (ioremap() and friends)
vmalloc vmalloc() area
vmap vmap()ed pages
user VM_USERMAP area
vpages buffer for pages pointers was vmalloced (huge area)
N<node>=nr (Only on NUMA kernels)
Number of pages allocated on memory node <node>
> cat /proc/vmallocinfo
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
phys=7fee8000 ioremap
0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
phys=7fee7000 ioremap
0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
pages=2 vmalloc N1=2
0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
/0x130 [x_tables] pages=4 vmalloc N0=4
0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
pages=14 vmalloc N2=14
0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
pages=4 vmalloc N1=4
0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
pages=2 vmalloc N1=2
0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
pages=10 vmalloc N0=10
1.3 IDE devices in /proc/ide
----------------------------
@ -887,7 +931,7 @@ group_prealloc max_to_scan mb_groups mb_history min_to_scan order2_req
stats stream_req
mb_groups:
This file gives the details of mutiblock allocator buddy cache of free blocks
This file gives the details of multiblock allocator buddy cache of free blocks
mb_history:
Multiblock allocation history.
@ -1430,7 +1474,7 @@ used because pages_free(1355) is smaller than watermark + protection[2]
normal page requirement. If requirement is DMA zone(index=0), protection[0]
(=0) is used.
zone[i]'s protection[j] is calculated by following exprssion.
zone[i]'s protection[j] is calculated by following expression.
(i < j):
zone[i]->protection[j]

10
Documentation/filesystems/relay.txt
View File

@ -294,6 +294,16 @@ user-defined data with a channel, and is immediately available
(including in create_buf_file()) via chan->private_data or
buf->chan->private_data.
Buffer-only channels
--------------------
These channels have no files associated and can be created with
relay_open(NULL, NULL, ...). Such channels are useful in scenarios such
as when doing early tracing in the kernel, before the VFS is up. In these
cases, one may open a buffer-only channel and then call
relay_late_setup_files() when the kernel is ready to handle files,
to expose the buffered data to the userspace.
Channel 'modes'
---------------

6
Documentation/filesystems/sysfs.txt
View File

@ -248,6 +248,7 @@ The top level sysfs directory looks like:
block/
bus/
class/
dev/
devices/
firmware/
net/
@ -274,6 +275,11 @@ fs/ contains a directory for some filesystems. Currently each
filesystem wanting to export attributes must create its own hierarchy
below fs/ (see ./fuse.txt for an example).
dev/ contains two directories char/ and block/. Inside these two
directories there are symlinks named <major>:<minor>. These symlinks
point to the sysfs directory for the given device. /sys/dev provides a
quick way to lookup the sysfs interface for a device from the result of
a stat(2) operation.
More information can driver-model specific features can be found in
Documentation/driver-model/.

8
Documentation/filesystems/vfat.txt
View File

@ -96,6 +96,14 @@ shortname=lower|win95|winnt|mixed
emulate the Windows 95 rule for create.
Default setting is `lower'.
tz=UTC -- Interpret timestamps as UTC rather than local time.
This option disables the conversion of timestamps
between local time (as used by Windows on FAT) and UTC
(which Linux uses internally). This is particuluarly
useful when mounting devices (like digital cameras)
that are set to UTC in order to avoid the pitfalls of
local time.
<bool>: 0,1,yes,no,true,false
TODO

6
Documentation/filesystems/vfs.txt
View File

@ -143,7 +143,7 @@ struct file_system_type {
The get_sb() method has the following arguments:
struct file_system_type *fs_type: decribes the filesystem, partly initialized
struct file_system_type *fs_type: describes the filesystem, partly initialized
by the specific filesystem code
int flags: mount flags
@ -895,9 +895,9 @@ struct dentry_operations {
iput() yourself
d_dname: called when the pathname of a dentry should be generated.
Usefull for some pseudo filesystems (sockfs, pipefs, ...) to delay
Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay
pathname generation. (Instead of doing it when dentry is created,
its done only when the path is needed.). Real filesystems probably
it's done only when the path is needed.). Real filesystems probably
dont want to use it, because their dentries are present in global
dcache hash, so their hash should be an invariant. As no lock is
held, d_dname() should not try to modify the dentry itself, unless

135
Documentation/gpio.txt
View File

@ -347,15 +347,12 @@ necessarily be nonportable.
Dynamic definition of GPIOs is not currently standard; for example, as
a side effect of configuring an add-on board with some GPIO expanders.
These calls are purely for kernel space, but a userspace API could be built
on top of them.
GPIO implementor's framework (OPTIONAL)
=======================================
As noted earlier, there is an optional implementation framework making it
easier for platforms to support different kinds of GPIO controller using
the same programming interface.
the same programming interface. This framework is called "gpiolib".
As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file
will be found there. That will list all the controllers registered through
@ -392,11 +389,21 @@ either NULL or the label associated with that GPIO when it was requested.
Platform Support
----------------
To support this framework, a platform's Kconfig will "select HAVE_GPIO_LIB"
To support this framework, a platform's Kconfig will "select" either
ARCH_REQUIRE_GPIOLIB or ARCH_WANT_OPTIONAL_GPIOLIB
and arrange that its <asm/gpio.h> includes <asm-generic/gpio.h> and defines
three functions: gpio_get_value(), gpio_set_value(), and gpio_cansleep().
They may also want to provide a custom value for ARCH_NR_GPIOS.
ARCH_REQUIRE_GPIOLIB means that the gpio-lib code will always get compiled
into the kernel on that architecture.
ARCH_WANT_OPTIONAL_GPIOLIB means the gpio-lib code defaults to off and the user
can enable it and build it into the kernel optionally.
If neither of these options are selected, the platform does not support
GPIOs through GPIO-lib and the code cannot be enabled by the user.
Trivial implementations of those functions can directly use framework
code, which always dispatches through the gpio_chip:
@ -439,4 +446,120 @@ becomes available. That may mean the device should not be registered until
calls for that GPIO can work. One way to address such dependencies is for
such gpio_chip controllers to provide setup() and teardown() callbacks to
board specific code; those board specific callbacks would register devices
once all the necessary resources are available.
once all the necessary resources are available, and remove them later when
the GPIO controller device becomes unavailable.
Sysfs Interface for Userspace (OPTIONAL)
========================================
Platforms which use the "gpiolib" implementors framework may choose to
configure a sysfs user interface to GPIOs. This is different from the
debugfs interface, since it provides control over GPIO direction and
value instead of just showing a gpio state summary. Plus, it could be
present on production systems without debugging support.
Given approprate hardware documentation for the system, userspace could
know for example that GPIO #23 controls the write protect line used to
protect boot loader segments in flash memory. System upgrade procedures
may need to temporarily remove that protection, first importing a GPIO,
then changing its output state, then updating the code before re-enabling
the write protection. In normal use, GPIO #23 would never be touched,
and the kernel would have no need to know about it.
Again depending on appropriate hardware documentation, on some systems
userspace GPIO can be used to determine system configuration data that
standard kernels won't know about. And for some tasks, simple userspace
GPIO drivers could be all that the system really needs.
Note that standard kernel drivers exist for common "LEDs and Buttons"
GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those
instead of talking directly to the GPIOs; they integrate with kernel
frameworks better than your userspace code could.
Paths in Sysfs
--------------
There are three kinds of entry in /sys/class/gpio:
- Control interfaces used to get userspace control over GPIOs;
- GPIOs themselves; and
- GPIO controllers ("gpio_chip" instances).
That's in addition to standard files including the "device" symlink.
The control interfaces are write-only:
/sys/class/gpio/
"export" ... Userspace may ask the kernel to export control of
a GPIO to userspace by writing its number to this file.
Example: "echo 19 > export" will create a "gpio19" node
for GPIO #19, if that's not requested by kernel code.
"unexport" ... Reverses the effect of exporting to userspace.
Example: "echo 19 > unexport" will remove a "gpio19"
node exported using the "export" file.
GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42)
and have the following read/write attributes:
/sys/class/gpio/gpioN/
"direction" ... reads as either "in" or "out". This value may
normally be written. Writing as "out" defaults to
initializing the value as low. To ensure glitch free
operation, values "low" and "high" may be written to
configure the GPIO as an output with that initial value.
Note that this attribute *will not exist* if the kernel
doesn't support changing the direction of a GPIO, or
it was exported by kernel code that didn't explicitly
allow userspace to reconfigure this GPIO's direction.
"value" ... reads as either 0 (low) or 1 (high). If the GPIO
is configured as an output, this value may be written;
any nonzero value is treated as high.
GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the
controller implementing GPIOs starting at #42) and have the following
read-only attributes:
/sys/class/gpio/gpiochipN/
"base" ... same as N, the first GPIO managed by this chip
"label" ... provided for diagnostics (not always unique)
"ngpio" ... how many GPIOs this manges (N to N + ngpio - 1)
Board documentation should in most cases cover what GPIOs are used for
what purposes. However, those numbers are not always stable; GPIOs on
a daughtercard might be different depending on the base board being used,
or other cards in the stack. In such cases, you may need to use the
gpiochip nodes (possibly in conjunction with schematics) to determine
the correct GPIO number to use for a given signal.
Exporting from Kernel code
--------------------------
Kernel code can explicitly manage exports of GPIOs which have already been
requested using gpio_request():
/* export the GPIO to userspace */
int gpio_export(unsigned gpio, bool direction_may_change);
/* reverse gpio_export() */
void gpio_unexport();
After a kernel driver requests a GPIO, it may only be made available in
the sysfs interface by gpio_export(). The driver can control whether the
signal direction may change. This helps drivers prevent userspace code
from accidentally clobbering important system state.
This explicit exporting can help with debugging (by making some kinds
of experiments easier), or can provide an always-there interface that's
suitable for documenting as part of a board support package.

281
Documentation/i2c/upgrading-clients Normal file
View File

@ -0,0 +1,281 @@
Upgrading I2C Drivers to the new 2.6 Driver Model
=================================================
Ben Dooks <ben-linux@fluff.org>
Introduction
------------
This guide outlines how to alter existing Linux 2.6 client drivers from
the old to the new new binding methods.
Example old-style driver
------------------------
struct example_state {
struct i2c_client client;
....
};
static struct i2c_driver example_driver;
static unsigned short ignore[] = { I2C_CLIENT_END };
static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
I2C_CLIENT_INSMOD;
static int example_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct example_state *state;
struct device *dev = &adap->dev; /* to use for dev_ reports */
int ret;
state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
if (state == NULL) {
dev_err(dev, "failed to create our state\n");
return -ENOMEM;
}
example->client.addr = addr;
example->client.flags = 0;
example->client.adapter = adap;
i2c_set_clientdata(&state->i2c_client, state);
strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
ret = i2c_attach_client(&state->i2c_client);
if (ret < 0) {
dev_err(dev, "failed to attach client\n");
kfree(state);
return ret;
}
dev = &state->i2c_client.dev;
/* rest of the initialisation goes here. */
dev_info(dev, "example client created\n");
return 0;
}
static int __devexit example_detach(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
i2c_detach_client(client);
kfree(state);
return 0;
}
static int example_attach_adapter(struct i2c_adapter *adap)
{
return i2c_probe(adap, &addr_data, example_attach);
}
static struct i2c_driver example_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "example",
},
.attach_adapter = example_attach_adapter,
.detach_client = __devexit_p(example_detach),
.suspend = example_suspend,
.resume = example_resume,
};
Updating the client
-------------------
The new style binding model will check against a list of supported
devices and their associated address supplied by the code registering
the busses. This means that the driver .attach_adapter and
.detach_adapter methods can be removed, along with the addr_data,
as follows:
- static struct i2c_driver example_driver;
- static unsigned short ignore[] = { I2C_CLIENT_END };
- static unsigned short normal_addr[] = { OUR_ADDR, I2C_CLIENT_END };
- I2C_CLIENT_INSMOD;
- static int example_attach_adapter(struct i2c_adapter *adap)
- {
- return i2c_probe(adap, &addr_data, example_attach);
- }
static struct i2c_driver example_driver = {
- .attach_adapter = example_attach_adapter,
- .detach_client = __devexit_p(example_detach),
}
Add the probe and remove methods to the i2c_driver, as so:
static struct i2c_driver example_driver = {
+ .probe = example_probe,
+ .remove = __devexit_p(example_remove),
}
Change the example_attach method to accept the new parameters
which include the i2c_client that it will be working with:
- static int example_attach(struct i2c_adapter *adap, int addr, int kind)
+ static int example_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
Change the name of example_attach to example_probe to align it with the
i2c_driver entry names. The rest of the probe routine will now need to be
changed as the i2c_client has already been setup for use.
The necessary client fields have already been setup before
the probe function is called, so the following client setup
can be removed:
- example->client.addr = addr;
- example->client.flags = 0;
- example->client.adapter = adap;
-
- strlcpy(client->i2c_client.name, "example", I2C_NAME_SIZE);
The i2c_set_clientdata is now:
- i2c_set_clientdata(&state->client, state);
+ i2c_set_clientdata(client, state);
The call to i2c_attach_client is no longer needed, if the probe
routine exits successfully, then the driver will be automatically
attached by the core. Change the probe routine as so:
- ret = i2c_attach_client(&state->i2c_client);
- if (ret < 0) {
- dev_err(dev, "failed to attach client\n");
- kfree(state);
- return ret;
- }
Remove the storage of 'struct i2c_client' from the 'struct example_state'
as we are provided with the i2c_client in our example_probe. Instead we
store a pointer to it for when it is needed.
struct example_state {
- struct i2c_client client;
+ struct i2c_client *client;
the new i2c client as so:
- struct device *dev = &adap->dev; /* to use for dev_ reports */
+ struct device *dev = &i2c_client->dev; /* to use for dev_ reports */
And remove the change after our client is attached, as the driver no
longer needs to register a new client structure with the core:
- dev = &state->i2c_client.dev;
In the probe routine, ensure that the new state has the client stored
in it:
static int example_probe(struct i2c_client *i2c_client,
const struct i2c_device_id *id)
{
struct example_state *state;
struct device *dev = &i2c_client->dev;
int ret;
state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
if (state == NULL) {
dev_err(dev, "failed to create our state\n");
return -ENOMEM;
}
+ state->client = i2c_client;
Update the detach method, by changing the name to _remove and
to delete the i2c_detach_client call. It is possible that you
can also remove the ret variable as it is not not needed for
any of the core functions.
- static int __devexit example_detach(struct i2c_client *client)
+ static int __devexit example_remove(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
- i2c_detach_client(client);
And finally ensure that we have the correct ID table for the i2c-core
and other utilities:
+ struct i2c_device_id example_idtable[] = {
+ { "example", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, example_idtable);
static struct i2c_driver example_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "example",
},
+ .id_table = example_ids,
Our driver should now look like this:
struct example_state {
struct i2c_client *client;
....
};
static int example_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct example_state *state;
struct device *dev = &client->dev;
state = kzalloc(sizeof(struct example_state), GFP_KERNEL);
if (state == NULL) {
dev_err(dev, "failed to create our state\n");
return -ENOMEM;
}
state->client = client;
i2c_set_clientdata(client, state);
/* rest of the initialisation goes here. */
dev_info(dev, "example client created\n");
return 0;
}
static int __devexit example_remove(struct i2c_client *client)
{
struct example_state *state = i2c_get_clientdata(client);
kfree(state);
return 0;
}
static struct i2c_device_id example_idtable[] = {
{ "example", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, example_idtable);
static struct i2c_driver example_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "example",
},
.id_table = example_idtable,
.probe = example_probe,
.remove = __devexit_p(example_remove),
.suspend = example_suspend,
.resume = example_resume,
};

8
Documentation/ia64/kvm.txt
View File

@ -50,9 +50,9 @@ Note: For step 2, please make sure that host page size == TARGET_PAGE_SIZE of qe
/usr/local/bin/qemu-system-ia64 -smp xx -m 512 -hda $your_image
(xx is the number of virtual processors for the guest, now the maximum value is 4)
5. Known possibile issue on some platforms with old Firmware.
5. Known possible issue on some platforms with old Firmware.
If meet strange host crashe issues, try to solve it through either of the following ways:
In the event of strange host crash issues, try to solve it through either of the following ways:
(1): Upgrade your Firmware to the latest one.
@ -65,8 +65,8 @@ index 0b53344..f02b0f7 100644
mov ar.pfs = loc1
mov rp = loc0
;;
- srlz.d // seralize restoration of psr.l
+ srlz.i // seralize restoration of psr.l
- srlz.d // serialize restoration of psr.l
+ srlz.i // serialize restoration of psr.l
+ ;;
br.ret.sptk.many b0
END(ia64_pal_call_static)

137
Documentation/ia64/paravirt_ops.txt Normal file
View File

@ -0,0 +1,137 @@
Paravirt_ops on IA64
====================
21 May 2008, Isaku Yamahata <yamahata@valinux.co.jp>
Introduction
------------
The aim of this documentation is to help with maintainability and/or to
encourage people to use paravirt_ops/IA64.
paravirt_ops (pv_ops in short) is a way for virtualization support of
Linux kernel on x86. Several ways for virtualization support were
proposed, paravirt_ops is the winner.
On the other hand, now there are also several IA64 virtualization
technologies like kvm/IA64, xen/IA64 and many other academic IA64
hypervisors so that it is good to add generic virtualization
infrastructure on Linux/IA64.
What is paravirt_ops?
---------------------
It has been developed on x86 as virtualization support via API, not ABI.
It allows each hypervisor to override operations which are important for
hypervisors at API level. And it allows a single kernel binary to run on
all supported execution environments including native machine.
Essentially paravirt_ops is a set of function pointers which represent
operations corresponding to low level sensitive instructions and high
level functionalities in various area. But one significant difference
from usual function pointer table is that it allows optimization with
binary patch. It is because some of these operations are very
performance sensitive and indirect call overhead is not negligible.
With binary patch, indirect C function call can be transformed into
direct C function call or in-place execution to eliminate the overhead.
Thus, operations of paravirt_ops are classified into three categories.
- simple indirect call
These operations correspond to high level functionality so that the
overhead of indirect call isn't very important.
- indirect call which allows optimization with binary patch
Usually these operations correspond to low level instructions. They
are called frequently and performance critical. So the overhead is
very important.
- a set of macros for hand written assembly code
Hand written assembly codes (.S files) also need paravirtualization
because they include sensitive instructions or some of code paths in
them are very performance critical.
The relation to the IA64 machine vector
---------------------------------------
Linux/IA64 has the IA64 machine vector functionality which allows the
kernel to switch implementations (e.g. initialization, ipi, dma api...)
depending on executing platform.
We can replace some implementations very easily defining a new machine
vector. Thus another approach for virtualization support would be
enhancing the machine vector functionality.
But paravirt_ops approach was taken because
- virtualization support needs wider support than machine vector does.
e.g. low level instruction paravirtualization. It must be
initialized very early before platform detection.
- virtualization support needs more functionality like binary patch.
Probably the calling overhead might not be very large compared to the
emulation overhead of virtualization. However in the native case, the
overhead should be eliminated completely.
A single kernel binary should run on each environment including native,
and the overhead of paravirt_ops on native environment should be as
small as possible.
- for full virtualization technology, e.g. KVM/IA64 or
Xen/IA64 HVM domain, the result would be
(the emulated platform machine vector. probably dig) + (pv_ops).
This means that the virtualization support layer should be under
the machine vector layer.
Possibly it might be better to move some function pointers from
paravirt_ops to machine vector. In fact, Xen domU case utilizes both
pv_ops and machine vector.
IA64 paravirt_ops
-----------------
In this section, the concrete paravirt_ops will be discussed.
Because of the architecture difference between ia64 and x86, the
resulting set of functions is very different from x86 pv_ops.
- C function pointer tables
They are not very performance critical so that simple C indirect
function call is acceptable. The following structures are defined at
this moment. For details see linux/include/asm-ia64/paravirt.h
- struct pv_info
This structure describes the execution environment.
- struct pv_init_ops
This structure describes the various initialization hooks.
- struct pv_iosapic_ops
This structure describes hooks to iosapic operations.
- struct pv_irq_ops
This structure describes hooks to irq related operations
- struct pv_time_op
This structure describes hooks to steal time accounting.
- a set of indirect calls which need optimization
Currently this class of functions correspond to a subset of IA64
intrinsics. At this moment the optimization with binary patch isn't
implemented yet.
struct pv_cpu_op is defined. For details see
linux/include/asm-ia64/paravirt_privop.h
Mostly they correspond to ia64 intrinsics 1-to-1.
Caveat: Now they are defined as C indirect function pointers, but in
order to support binary patch optimization, they will be changed
using GCC extended inline assembly code.
- a set of macros for hand written assembly code (.S files)
For maintenance purpose, the taken approach for .S files is single
source code and compile multiple times with different macros definitions.
Each pv_ops instance must define those macros to compile.
The important thing here is that sensitive, but non-privileged
instructions must be paravirtualized and that some privileged
instructions also need paravirtualization for reasonable performance.
Developers who modify .S files must be aware of that. At this moment
an easy checker is implemented to detect paravirtualization breakage.
But it doesn't cover all the cases.
Sometimes this set of macros is called pv_cpu_asm_op. But there is no
corresponding structure in the source code.
Those macros mostly 1:1 correspond to a subset of privileged
instructions. See linux/include/asm-ia64/native/inst.h.
And some functions written in assembly also need to be overrided so
that each pv_ops instance have to define some macros. Again see
linux/include/asm-ia64/native/inst.h.
Those structures must be initialized very early before start_kernel.
Probably initialized in head.S using multi entry point or some other trick.
For native case implementation see linux/arch/ia64/kernel/paravirt.c.

2
Documentation/input/cs461x.txt
View File

@ -31,7 +31,7 @@ The driver works with ALSA drivers simultaneously. For example, the xracer
uses joystick as input device and PCM device as sound output in one time.
There are no sound or input collisions detected. The source code have
comments about them; but I've found the joystick can be initialized
separately of ALSA modules. So, you canm use only one joystick driver
separately of ALSA modules. So, you can use only one joystick driver
without ALSA drivers. The ALSA drivers are not needed to compile or
run this driver.

4
Documentation/ioctl/ioctl-decoding.txt
View File

@ -1,6 +1,6 @@
To decode a hex IOCTL code:
Most architecures use this generic format, but check
Most architectures use this generic format, but check
include/ARCH/ioctl.h for specifics, e.g. powerpc
uses 3 bits to encode read/write and 13 bits for size.
@ -18,7 +18,7 @@ uses 3 bits to encode read/write and 13 bits for size.
7-0 function #
So for example 0x82187201 is a read with arg length of 0x218,
So for example 0x82187201 is a read with arg length of 0x218,
character 'r' function 1. Grepping the source reveals this is:
#define VFAT_IOCTL_READDIR_BOTH _IOR('r', 1, struct dirent [2])

2
Documentation/iostats.txt
View File

@ -143,7 +143,7 @@ disk and partition statistics are consistent again. Since we still don't
keep record of the partition-relative address, an operation is attributed to
the partition which contains the first sector of the request after the
eventual merges. As requests can be merged across partition, this could lead
to some (probably insignificant) innacuracy.
to some (probably insignificant) inaccuracy.
Additional notes
----------------

6
Documentation/isdn/README.mISDN Normal file
View File

@ -0,0 +1,6 @@
mISDN is a new modular ISDN driver, in the long term it should replace
the old I4L driver architecture for passiv ISDN cards.
It was designed to allow a broad range of applications and interfaces
but only have the basic function in kernel, the interface to the user
space is based on sockets with a own address family AF_ISDN.

20
Documentation/kdump/kdump.txt
View File

@ -65,26 +65,26 @@ Install kexec-tools
2) Download the kexec-tools user-space package from the following URL:
http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools-testing.tar.gz
http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz
This is a symlink to the latest version, which at the time of writing is
20061214, the only release of kexec-tools-testing so far. As other versions
are released, the older ones will remain available at
http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
This is a symlink to the latest version.
Note: Latest kexec-tools-testing git tree is available at
The latest kexec-tools git tree is available at:
git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools-testing.git
git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
or
http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools-testing.git;a=summary
http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git
More information about kexec-tools can be found at
http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html
3) Unpack the tarball with the tar command, as follows:
tar xvpzf kexec-tools-testing.tar.gz
tar xvpzf kexec-tools.tar.gz
4) Change to the kexec-tools directory, as follows:
cd kexec-tools-testing-VERSION
cd kexec-tools-VERSION
5) Configure the package, as follows:

62
Documentation/kernel-parameters.txt
View File

@ -87,7 +87,8 @@ parameter is applicable:
SH SuperH architecture is enabled.
SMP The kernel is an SMP kernel.
SPARC Sparc architecture is enabled.
SWSUSP Software suspend is enabled.
SWSUSP Software suspend (hibernation) is enabled.
SUSPEND System suspend states are enabled.
TS Appropriate touchscreen support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
@ -147,10 +148,12 @@ and is between 256 and 4096 characters. It is defined in the file
default: 0
acpi_sleep= [HW,ACPI] Sleep options
Format: { s3_bios, s3_mode, s3_beep, old_ordering }
Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, old_ordering }
See Documentation/power/video.txt for s3_bios and s3_mode.
s3_beep is for debugging; it makes the PC's speaker beep
as soon as the kernel's real-mode entry point is called.
s4_nohwsig prevents ACPI hardware signature from being
used during resume from hibernation.
old_ordering causes the ACPI 1.0 ordering of the _PTS
control method, wrt putting devices into low power
states, to be enforced (the ACPI 2.0 ordering of _PTS is
@ -774,8 +777,22 @@ and is between 256 and 4096 characters. It is defined in the file
hisax= [HW,ISDN]
See Documentation/isdn/README.HiSax.
hugepages= [HW,X86-32,IA-64] Maximal number of HugeTLB pages.
hugepagesz= [HW,IA-64,PPC] The size of the HugeTLB pages.
hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
On x86-64 and powerpc, this option can be specified
multiple times interleaved with hugepages= to reserve
huge pages of different sizes. Valid pages sizes on
x86-64 are 2M (when the CPU supports "pse") and 1G
(when the CPU supports the "pdpe1gb" cpuinfo flag)
Note that 1GB pages can only be allocated at boot time
using hugepages= and not freed afterwards.
default_hugepagesz=
[same as hugepagesz=] The size of the default
HugeTLB page size. This is the size represented by
the legacy /proc/ hugepages APIs, used for SHM, and
default size when mounting hugetlbfs filesystems.
Defaults to the default architecture's huge page size
if not specified.
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
@ -1206,7 +1223,7 @@ and is between 256 and 4096 characters. It is defined in the file
or
memmap=0x10000$0x18690000
memtest= [KNL,X86_64] Enable memtest
memtest= [KNL,X86] Enable memtest
Format: <integer>
range: 0,4 : pattern number
default : 0 <disable>
@ -1225,6 +1242,14 @@ and is between 256 and 4096 characters. It is defined in the file
mga= [HW,DRM]
mminit_loglevel=
[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
parameter allows control of the logging verbosity for
the additional memory initialisation checks. A value
of 0 disables mminit logging and a level of 4 will
log everything. Information is printed at KERN_DEBUG
so loglevel=8 may also need to be specified.
mousedev.tap_time=
[MOUSE] Maximum time between finger touching and
leaving touchpad surface for touch to be considered
@ -1279,6 +1304,13 @@ and is between 256 and 4096 characters. It is defined in the file
This usage is only documented in each driver source
file if at all.
nf_conntrack.acct=
[NETFILTER] Enable connection tracking flow accounting
0 to disable accounting
1 to enable accounting
Default value depends on CONFIG_NF_CT_ACCT that is
going to be removed in 2.6.29.
nfsaddrs= [NFS]
See Documentation/filesystems/nfsroot.txt.
@ -2027,6 +2059,9 @@ and is between 256 and 4096 characters. It is defined in the file
snd-ymfpci= [HW,ALSA]
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
sonypi.*= [HW] Sony Programmable I/O Control Device driver
See Documentation/sonypi.txt
@ -2091,6 +2126,12 @@ and is between 256 and 4096 characters. It is defined in the file
tdfx= [HW,DRM]
test_suspend= [SUSPEND]
Specify "mem" (for Suspend-to-RAM) or "standby" (for
standby suspend) as the system sleep state to briefly
enter during system startup. The system is woken from
this state using a wakeup-capable RTC alarm.
thash_entries= [KNL,NET]
Set number of hash buckets for TCP connection
@ -2118,13 +2159,6 @@ and is between 256 and 4096 characters. It is defined in the file
<deci-seconds>: poll all this frequency
0: no polling (default)
tipar.timeout= [HW,PPT]
Set communications timeout in tenths of a second
(default 15).
tipar.delay= [HW,PPT]
Set inter-bit delay in microseconds (default 10).
tmscsim= [HW,SCSI]
See comment before function dc390_setup() in
drivers/scsi/tmscsim.c.
@ -2158,6 +2192,10 @@ and is between 256 and 4096 characters. It is defined in the file
Note that genuine overcurrent events won't be
reported either.
unknown_nmi_panic
[X86-32,X86-64]
Set unknown_nmi_panic=1 early on boot.
usbcore.autosuspend=
[USB] The autosuspend time delay (in seconds) used
for newly-detected USB devices (default 2). This

2
Documentation/keys.txt
View File

@ -864,7 +864,7 @@ payload contents" for more information.
request_key_with_auxdata() respectively.
These two functions return with the key potentially still under
construction. To wait for contruction completion, the following should be
construction. To wait for construction completion, the following should be
called:
int wait_for_key_construction(struct key *key, bool intr);

26
Documentation/laptops/thinkpad-acpi.txt
View File

@ -1,7 +1,7 @@
ThinkPad ACPI Extras Driver
Version 0.20
April 09th, 2008
Version 0.21
May 29th, 2008
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@ -621,7 +621,8 @@ Bluetooth
---------
procfs: /proc/acpi/ibm/bluetooth
sysfs device attribute: bluetooth_enable
sysfs device attribute: bluetooth_enable (deprecated)
sysfs rfkill class: switch "tpacpi_bluetooth_sw"
This feature shows the presence and current state of a ThinkPad
Bluetooth device in the internal ThinkPad CDC slot.
@ -643,8 +644,12 @@ Sysfs notes:
0: disables Bluetooth / Bluetooth is disabled
1: enables Bluetooth / Bluetooth is enabled.
Note: this interface will be probably be superseded by the
generic rfkill class, so it is NOT to be considered stable yet.
Note: this interface has been superseded by the generic rfkill
class. It has been deprecated, and it will be removed in year
2010.
rfkill controller switch "tpacpi_bluetooth_sw": refer to
Documentation/rfkill.txt for details.
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
@ -1374,7 +1379,8 @@ EXPERIMENTAL: WAN
-----------------
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan_enable
sysfs device attribute: wwan_enable (deprecated)
sysfs rfkill class: switch "tpacpi_wwan_sw"
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
@ -1404,8 +1410,12 @@ Sysfs notes:
0: disables WWAN card / WWAN card is disabled
1: enables WWAN card / WWAN card is enabled.
Note: this interface will be probably be superseded by the
generic rfkill class, so it is NOT to be considered stable yet.
Note: this interface has been superseded by the generic rfkill
class. It has been deprecated, and it will be removed in year
2010.
rfkill controller switch "tpacpi_wwan_sw": refer to
Documentation/rfkill.txt for details.
Multiple Commands, Module Parameters
------------------------------------

2
Documentation/leds-class.txt
View File

@ -59,7 +59,7 @@ Hardware accelerated blink of LEDs
Some LEDs can be programmed to blink without any CPU interaction. To
support this feature, a LED driver can optionally implement the
blink_set() function (see <linux/leds.h>). If implemeted, triggers can
blink_set() function (see <linux/leds.h>). If implemented, triggers can
attempt to use it before falling back to software timers. The blink_set()
function should return 0 if the blink setting is supported, or -EINVAL
otherwise, which means that LED blinking will be handled by software.

515
Documentation/lguest/lguest.c
View File

@ -36,11 +36,13 @@
#include <sched.h>
#include <limits.h>
#include <stddef.h>
#include <signal.h>
#include "linux/lguest_launcher.h"
#include "linux/virtio_config.h"
#include "linux/virtio_net.h"
#include "linux/virtio_blk.h"
#include "linux/virtio_console.h"
#include "linux/virtio_rng.h"
#include "linux/virtio_ring.h"
#include "asm-x86/bootparam.h"
/*L:110 We can ignore the 39 include files we need for this program, but I do
@ -64,8 +66,8 @@ typedef uint8_t u8;
#endif
/* We can have up to 256 pages for devices. */
#define DEVICE_PAGES 256
/* This will occupy 2 pages: it must be a power of 2. */
#define VIRTQUEUE_NUM 128
/* This will occupy 3 pages: it must be a power of 2. */
#define VIRTQUEUE_NUM 256
/*L:120 verbose is both a global flag and a macro. The C preprocessor allows
* this, and although I wouldn't recommend it, it works quite nicely here. */
@ -74,12 +76,19 @@ static bool verbose;
do { if (verbose) printf(args); } while(0)
/*:*/
/* The pipe to send commands to the waker process */
static int waker_fd;
/* File descriptors for the Waker. */
struct {
int pipe[2];
int lguest_fd;
} waker_fds;
/* The pointer to the start of guest memory. */
static void *guest_base;
/* The maximum guest physical address allowed, and maximum possible. */
static unsigned long guest_limit, guest_max;
/* The pipe for signal hander to write to. */
static int timeoutpipe[2];
static unsigned int timeout_usec = 500;
/* a per-cpu variable indicating whose vcpu is currently running */
static unsigned int __thread cpu_id;
@ -155,11 +164,14 @@ struct virtqueue
/* Last available index we saw. */
u16 last_avail_idx;
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
/* The routine to call when the Guest pings us, or timeout. */
void (*handle_output)(int fd, struct virtqueue *me, bool timeout);
/* Outstanding buffers */
unsigned int inflight;
/* Is this blocked awaiting a timer? */
bool blocked;
};
/* Remember the arguments to the program so we can "reboot" */
@ -190,6 +202,9 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
return iov->iov_base;
}
/* Wrapper for the last available index. Makes it easier to change. */
#define lg_last_avail(vq) ((vq)->last_avail_idx)
/* The virtio configuration space is defined to be little-endian. x86 is
* little-endian too, but it's nice to be explicit so we have these helpers. */
#define cpu_to_le16(v16) (v16)
@ -199,6 +214,33 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
#define le32_to_cpu(v32) (v32)
#define le64_to_cpu(v64) (v64)
/* Is this iovec empty? */
static bool iov_empty(const struct iovec iov[], unsigned int num_iov)
{
unsigned int i;
for (i = 0; i < num_iov; i++)
if (iov[i].iov_len)
return false;
return true;
}
/* Take len bytes from the front of this iovec. */
static void iov_consume(struct iovec iov[], unsigned num_iov, unsigned len)
{
unsigned int i;
for (i = 0; i < num_iov; i++) {
unsigned int used;
used = iov[i].iov_len < len ? iov[i].iov_len : len;
iov[i].iov_base += used;
iov[i].iov_len -= used;
len -= used;
}
assert(len == 0);
}
/* The device virtqueue descriptors are followed by feature bitmasks. */
static u8 *get_feature_bits(struct device *dev)
{
@ -254,6 +296,7 @@ static void *map_zeroed_pages(unsigned int num)
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
if (addr == MAP_FAILED)
err(1, "Mmaping %u pages of /dev/zero", num);
close(fd);
return addr;
}
@ -540,69 +583,64 @@ static void add_device_fd(int fd)
* watch, but handing a file descriptor mask through to the kernel is fairly
* icky.
*
* Instead, we fork off a process which watches the file descriptors and writes
* Instead, we clone off a thread which watches the file descriptors and writes
* the LHREQ_BREAK command to the /dev/lguest file descriptor to tell the Host
* stop running the Guest. This causes the Launcher to return from the
* /dev/lguest read with -EAGAIN, where it will write to /dev/lguest to reset
* the LHREQ_BREAK and wake us up again.
*
* This, of course, is merely a different *kind* of icky.
*
* Given my well-known antipathy to threads, I'd prefer to use processes. But
* it's easier to share Guest memory with threads, and trivial to share the
* devices.infds as the Launcher changes it.
*/
static void wake_parent(int pipefd, int lguest_fd)
static int waker(void *unused)
{
/* Add the pipe from the Launcher to the fdset in the device_list, so
* we watch it, too. */
add_device_fd(pipefd);
/* Close the write end of the pipe: only the Launcher has it open. */
close(waker_fds.pipe[1]);
for (;;) {
fd_set rfds = devices.infds;
unsigned long args[] = { LHREQ_BREAK, 1 };
unsigned int maxfd = devices.max_infd;
/* We also listen to the pipe from the Launcher. */
FD_SET(waker_fds.pipe[0], &rfds);
if (waker_fds.pipe[0] > maxfd)
maxfd = waker_fds.pipe[0];
/* Wait until input is ready from one of the devices. */
select(devices.max_infd+1, &rfds, NULL, NULL, NULL);
/* Is it a message from the Launcher? */
if (FD_ISSET(pipefd, &rfds)) {
int fd;
/* If read() returns 0, it means the Launcher has
* exited. We silently follow. */
if (read(pipefd, &fd, sizeof(fd)) == 0)
exit(0);
/* Otherwise it's telling us to change what file
* descriptors we're to listen to. Positive means
* listen to a new one, negative means stop
* listening. */
if (fd >= 0)
FD_SET(fd, &devices.infds);
else
FD_CLR(-fd - 1, &devices.infds);
} else /* Send LHREQ_BREAK command. */
pwrite(lguest_fd, args, sizeof(args), cpu_id);
select(maxfd+1, &rfds, NULL, NULL, NULL);
/* Message from Launcher? */
if (FD_ISSET(waker_fds.pipe[0], &rfds)) {
char c;
/* If this fails, then assume Launcher has exited.
* Don't do anything on exit: we're just a thread! */
if (read(waker_fds.pipe[0], &c, 1) != 1)
_exit(0);
continue;
}
/* Send LHREQ_BREAK command to snap the Launcher out of it. */
pwrite(waker_fds.lguest_fd, args, sizeof(args), cpu_id);
}
return 0;
}
/* This routine just sets up a pipe to the Waker process. */
static int setup_waker(int lguest_fd)
static void setup_waker(int lguest_fd)
{
int pipefd[2], child;
/* This pipe is closed when Launcher dies, telling Waker. */
if (pipe(waker_fds.pipe) != 0)
err(1, "Creating pipe for Waker");
/* We create a pipe to talk to the Waker, and also so it knows when the
* Launcher dies (and closes pipe). */
pipe(pipefd);
child = fork();
if (child == -1)
err(1, "forking");
/* Waker also needs to know the lguest fd */
waker_fds.lguest_fd = lguest_fd;
if (child == 0) {
/* We are the Waker: close the "writing" end of our copy of the
* pipe and start waiting for input. */
close(pipefd[1]);
wake_parent(pipefd[0], lguest_fd);
}
/* Close the reading end of our copy of the pipe. */
close(pipefd[0]);
/* Here is the fd used to talk to the waker. */
return pipefd[1];
if (clone(waker, malloc(4096) + 4096, CLONE_VM | SIGCHLD, NULL) == -1)
err(1, "Creating Waker");
}
/*
@ -661,19 +699,22 @@ static unsigned get_vq_desc(struct virtqueue *vq,
unsigned int *out_num, unsigned int *in_num)
{
unsigned int i, head;
u16 last_avail;
/* Check it isn't doing very strange things with descriptor numbers. */
if ((u16)(vq->vring.avail->idx - vq->last_avail_idx) > vq->vring.num)
last_avail = lg_last_avail(vq);
if ((u16)(vq->vring.avail->idx - last_avail) > vq->vring.num)
errx(1, "Guest moved used index from %u to %u",
vq->last_avail_idx, vq->vring.avail->idx);
last_avail, vq->vring.avail->idx);
/* If there's nothing new since last we looked, return invalid. */
if (vq->vring.avail->idx == vq->last_avail_idx)
if (vq->vring.avail->idx == last_avail)
return vq->vring.num;
/* Grab the next descriptor number they're advertising, and increment
* the index we've seen. */
head = vq->vring.avail->ring[vq->last_avail_idx++ % vq->vring.num];
head = vq->vring.avail->ring[last_avail % vq->vring.num];
lg_last_avail(vq)++;
/* If their number is silly, that's a fatal mistake. */
if (head >= vq->vring.num)
@ -821,8 +862,8 @@ static bool handle_console_input(int fd, struct device *dev)
unsigned long args[] = { LHREQ_BREAK, 0 };
/* Close the fd so Waker will know it has to
* exit. */
close(waker_fd);
/* Just in case waker is blocked in BREAK, send
close(waker_fds.pipe[1]);
/* Just in case Waker is blocked in BREAK, send
* unbreak now. */
write(fd, args, sizeof(args));
exit(2);
@ -839,7 +880,7 @@ static bool handle_console_input(int fd, struct device *dev)
/* Handling output for console is simple: we just get all the output buffers
* and write them to stdout. */
static void handle_console_output(int fd, struct virtqueue *vq)
static void handle_console_output(int fd, struct virtqueue *vq, bool timeout)
{
unsigned int head, out, in;
int len;
@ -854,6 +895,21 @@ static void handle_console_output(int fd, struct virtqueue *vq)
}
}
static void block_vq(struct virtqueue *vq)
{
struct itimerval itm;
vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
vq->blocked = true;
itm.it_interval.tv_sec = 0;
itm.it_interval.tv_usec = 0;
itm.it_value.tv_sec = 0;
itm.it_value.tv_usec = timeout_usec;
setitimer(ITIMER_REAL, &itm, NULL);
}
/*
* The Network
*
@ -861,22 +917,34 @@ static void handle_console_output(int fd, struct virtqueue *vq)
* and write them (ignoring the first element) to this device's file descriptor
* (/dev/net/tun).
*/
static void handle_net_output(int fd, struct virtqueue *vq)
static void handle_net_output(int fd, struct virtqueue *vq, bool timeout)
{
unsigned int head, out, in;
unsigned int head, out, in, num = 0;
int len;
struct iovec iov[vq->vring.num];
static int last_timeout_num;
/* Keep getting output buffers from the Guest until we run out. */
while ((head = get_vq_desc(vq, iov, &out, &in)) != vq->vring.num) {
if (in)
errx(1, "Input buffers in output queue?");
/* Check header, but otherwise ignore it (we told the Guest we
* supported no features, so it shouldn't have anything
* interesting). */
(void)convert(&iov[0], struct virtio_net_hdr);
len = writev(vq->dev->fd, iov+1, out-1);
len = writev(vq->dev->fd, iov, out);
if (len < 0)
err(1, "Writing network packet to tun");
add_used_and_trigger(fd, vq, head, len);
num++;
}
/* Block further kicks and set up a timer if we saw anything. */
if (!timeout && num)
block_vq(vq);
if (timeout) {
if (num < last_timeout_num)
timeout_usec += 10;
else if (timeout_usec > 1)
timeout_usec--;
last_timeout_num = num;
}
}
@ -887,7 +955,6 @@ static bool handle_tun_input(int fd, struct device *dev)
unsigned int head, in_num, out_num;
int len;
struct iovec iov[dev->vq->vring.num];
struct virtio_net_hdr *hdr;
/* First we need a network buffer from the Guests's recv virtqueue. */
head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
@ -896,25 +963,23 @@ static bool handle_tun_input(int fd, struct device *dev)
* early, the Guest won't be ready yet. Wait until the device
* status says it's ready. */
/* FIXME: Actually want DRIVER_ACTIVE here. */
if (dev->desc->status & VIRTIO_CONFIG_S_DRIVER_OK)
warn("network: no dma buffer!");
/* Now tell it we want to know if new things appear. */
dev->vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
wmb();
/* We'll turn this back on if input buffers are registered. */
return false;
} else if (out_num)
errx(1, "Output buffers in network recv queue?");
/* First element is the header: we set it to 0 (no features). */
hdr = convert(&iov[0], struct virtio_net_hdr);
hdr->flags = 0;
hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
/* Read the packet from the device directly into the Guest's buffer. */
len = readv(dev->fd, iov+1, in_num-1);
len = readv(dev->fd, iov, in_num);
if (len <= 0)
err(1, "reading network");
/* Tell the Guest about the new packet. */
add_used_and_trigger(fd, dev->vq, head, sizeof(*hdr) + len);
add_used_and_trigger(fd, dev->vq, head, len);
verbose("tun input packet len %i [%02x %02x] (%s)\n", len,
((u8 *)iov[1].iov_base)[0], ((u8 *)iov[1].iov_base)[1],
@ -927,11 +992,18 @@ static bool handle_tun_input(int fd, struct device *dev)
/*L:215 This is the callback attached to the network and console input
* virtqueues: it ensures we try again, in case we stopped console or net
* delivery because Guest didn't have any buffers. */
static void enable_fd(int fd, struct virtqueue *vq)
static void enable_fd(int fd, struct virtqueue *vq, bool timeout)
{
add_device_fd(vq->dev->fd);
/* Tell waker to listen to it again */
write(waker_fd, &vq->dev->fd, sizeof(vq->dev->fd));
/* Snap the Waker out of its select loop. */
write(waker_fds.pipe[1], "", 1);
}
static void net_enable_fd(int fd, struct virtqueue *vq, bool timeout)
{
/* We don't need to know again when Guest refills receive buffer. */
vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
enable_fd(fd, vq, timeout);
}
/* When the Guest tells us they updated the status field, we handle it. */
@ -951,7 +1023,7 @@ static void update_device_status(struct device *dev)
for (vq = dev->vq; vq; vq = vq->next) {
memset(vq->vring.desc, 0,
vring_size(vq->config.num, getpagesize()));
vq->last_avail_idx = 0;
lg_last_avail(vq) = 0;
}
} else if (dev->desc->status & VIRTIO_CONFIG_S_FAILED) {
warnx("Device %s configuration FAILED", dev->name);
@ -960,10 +1032,10 @@ static void update_device_status(struct device *dev)
verbose("Device %s OK: offered", dev->name);
for (i = 0; i < dev->desc->feature_len; i++)
verbose(" %08x", get_feature_bits(dev)[i]);
verbose(" %02x", get_feature_bits(dev)[i]);
verbose(", accepted");
for (i = 0; i < dev->desc->feature_len; i++)
verbose(" %08x", get_feature_bits(dev)
verbose(" %02x", get_feature_bits(dev)
[dev->desc->feature_len+i]);
if (dev->ready)
@ -1000,7 +1072,7 @@ static void handle_output(int fd, unsigned long addr)
if (strcmp(vq->dev->name, "console") != 0)
verbose("Output to %s\n", vq->dev->name);
if (vq->handle_output)
vq->handle_output(fd, vq);
vq->handle_output(fd, vq, false);
return;
}
}
@ -1014,6 +1086,29 @@ static void handle_output(int fd, unsigned long addr)
strnlen(from_guest_phys(addr), guest_limit - addr));
}
static void handle_timeout(int fd)
{
char buf[32];
struct device *i;
struct virtqueue *vq;
/* Clear the pipe */
read(timeoutpipe[0], buf, sizeof(buf));
/* Check each device and virtqueue: flush blocked ones. */
for (i = devices.dev; i; i = i->next) {
for (vq = i->vq; vq; vq = vq->next) {
if (!vq->blocked)
continue;
vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
vq->blocked = false;
if (vq->handle_output)
vq->handle_output(fd, vq, true);
}
}
}
/* This is called when the Waker wakes us up: check for incoming file
* descriptors. */
static void handle_input(int fd)
@ -1024,16 +1119,20 @@ static void handle_input(int fd)
for (;;) {
struct device *i;
fd_set fds = devices.infds;
int num;
num = select(devices.max_infd+1, &fds, NULL, NULL, &poll);
/* Could get interrupted */
if (num < 0)
continue;
/* If nothing is ready, we're done. */
if (select(devices.max_infd+1, &fds, NULL, NULL, &poll) == 0)
if (num == 0)
break;
/* Otherwise, call the device(s) which have readable file
* descriptors and a method of handling them. */
for (i = devices.dev; i; i = i->next) {
if (i->handle_input && FD_ISSET(i->fd, &fds)) {
int dev_fd;
if (i->handle_input(fd, i))
continue;
@ -1043,13 +1142,12 @@ static void handle_input(int fd)
* buffers to deliver into. Console also uses
* it when it discovers that stdin is closed. */
FD_CLR(i->fd, &devices.infds);
/* Tell waker to ignore it too, by sending a
* negative fd number (-1, since 0 is a valid
* FD number). */
dev_fd = -i->fd - 1;
write(waker_fd, &dev_fd, sizeof(dev_fd));
}
}
/* Is this the timeout fd? */
if (FD_ISSET(timeoutpipe[0], &fds))
handle_timeout(fd);
}
}
@ -1098,7 +1196,7 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
/* Each device descriptor is followed by the description of its virtqueues. We
* specify how many descriptors the virtqueue is to have. */
static void add_virtqueue(struct device *dev, unsigned int num_descs,
void (*handle_output)(int fd, struct virtqueue *me))
void (*handle_output)(int, struct virtqueue *, bool))
{
unsigned int pages;
struct virtqueue **i, *vq = malloc(sizeof(*vq));
@ -1114,6 +1212,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
vq->last_avail_idx = 0;
vq->dev = dev;
vq->inflight = 0;
vq->blocked = false;
/* Initialize the configuration. */
vq->config.num = num_descs;
@ -1246,6 +1345,24 @@ static void setup_console(void)
}
/*:*/
static void timeout_alarm(int sig)
{
write(timeoutpipe[1], "", 1);
}
static void setup_timeout(void)
{
if (pipe(timeoutpipe) != 0)
err(1, "Creating timeout pipe");
if (fcntl(timeoutpipe[1], F_SETFL,
fcntl(timeoutpipe[1], F_GETFL) | O_NONBLOCK) != 0)
err(1, "Making timeout pipe nonblocking");
add_device_fd(timeoutpipe[0]);
signal(SIGALRM, timeout_alarm);
}
/*M:010 Inter-guest networking is an interesting area. Simplest is to have a
* --sharenet=<name> option which opens or creates a named pipe. This can be
* used to send packets to another guest in a 1:1 manner.
@ -1264,10 +1381,25 @@ static void setup_console(void)
static u32 str2ip(const char *ipaddr)
{
unsigned int byte[4];
unsigned int b[4];
sscanf(ipaddr, "%u.%u.%u.%u", &byte[0], &byte[1], &byte[2], &byte[3]);
return (byte[0] << 24) | (byte[1] << 16) | (byte[2] << 8) | byte[3];
if (sscanf(ipaddr, "%u.%u.%u.%u", &b[0], &b[1], &b[2], &b[3]) != 4)
errx(1, "Failed to parse IP address '%s'", ipaddr);
return (b[0] << 24) | (b[1] << 16) | (b[2] << 8) | b[3];
}
static void str2mac(const char *macaddr, unsigned char mac[6])
{
unsigned int m[6];
if (sscanf(macaddr, "%02x:%02x:%02x:%02x:%02x:%02x",
&m[0], &m[1], &m[2], &m[3], &m[4], &m[5]) != 6)
errx(1, "Failed to parse mac address '%s'", macaddr);
mac[0] = m[0];
mac[1] = m[1];
mac[2] = m[2];
mac[3] = m[3];
mac[4] = m[4];
mac[5] = m[5];
}
/* This code is "adapted" from libbridge: it attaches the Host end of the
@ -1288,6 +1420,7 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
errx(1, "interface %s does not exist!", if_name);
strncpy(ifr.ifr_name, br_name, IFNAMSIZ);
ifr.ifr_name[IFNAMSIZ-1] = '\0';
ifr.ifr_ifindex = ifidx;
if (ioctl(fd, SIOCBRADDIF, &ifr) < 0)
err(1, "can't add %s to bridge %s", if_name, br_name);
@ -1296,64 +1429,90 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
/* This sets up the Host end of the network device with an IP address, brings
* it up so packets will flow, the copies the MAC address into the hwaddr
* pointer. */
static void configure_device(int fd, const char *devname, u32 ipaddr,
unsigned char hwaddr[6])
static void configure_device(int fd, const char *tapif, u32 ipaddr)
{
struct ifreq ifr;
struct sockaddr_in *sin = (struct sockaddr_in *)&ifr.ifr_addr;
/* Don't read these incantations. Just cut & paste them like I did! */
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, devname);
strcpy(ifr.ifr_name, tapif);
/* Don't read these incantations. Just cut & paste them like I did! */
sin->sin_family = AF_INET;
sin->sin_addr.s_addr = htonl(ipaddr);
if (ioctl(fd, SIOCSIFADDR, &ifr) != 0)
err(1, "Setting %s interface address", devname);
err(1, "Setting %s interface address", tapif);
ifr.ifr_flags = IFF_UP;
if (ioctl(fd, SIOCSIFFLAGS, &ifr) != 0)
err(1, "Bringing interface %s up", devname);
err(1, "Bringing interface %s up", tapif);
}
static void get_mac(int fd, const char *tapif, unsigned char hwaddr[6])
{
struct ifreq ifr;
memset(&ifr, 0, sizeof(ifr));
strcpy(ifr.ifr_name, tapif);
/* SIOC stands for Socket I/O Control. G means Get (vs S for Set
* above). IF means Interface, and HWADDR is hardware address.
* Simple! */
if (ioctl(fd, SIOCGIFHWADDR, &ifr) != 0)
err(1, "getting hw address for %s", devname);
err(1, "getting hw address for %s", tapif);
memcpy(hwaddr, ifr.ifr_hwaddr.sa_data, 6);
}
/*L:195 Our network is a Host<->Guest network. This can either use bridging or
* routing, but the principle is the same: it uses the "tun" device to inject
* packets into the Host as if they came in from a normal network card. We
* just shunt packets between the Guest and the tun device. */
static void setup_tun_net(const char *arg)
static int get_tun_device(char tapif[IFNAMSIZ])
{
struct device *dev;
struct ifreq ifr;
int netfd, ipfd;
u32 ip;
const char *br_name = NULL;
struct virtio_net_config conf;
int netfd;
/* Start with this zeroed. Messy but sure. */
memset(&ifr, 0, sizeof(ifr));
/* We open the /dev/net/tun device and tell it we want a tap device. A
* tap device is like a tun device, only somehow different. To tell
* the truth, I completely blundered my way through this code, but it
* works now! */
netfd = open_or_die("/dev/net/tun", O_RDWR);
memset(&ifr, 0, sizeof(ifr));
ifr.ifr_flags = IFF_TAP | IFF_NO_PI;
ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
strcpy(ifr.ifr_name, "tap%d");
if (ioctl(netfd, TUNSETIFF, &ifr) != 0)
err(1, "configuring /dev/net/tun");
if (ioctl(netfd, TUNSETOFFLOAD,
TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
err(1, "Could not set features for tun device");
/* We don't need checksums calculated for packets coming in this
* device: trust us! */
ioctl(netfd, TUNSETNOCSUM, 1);
memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
return netfd;
}
/*L:195 Our network is a Host<->Guest network. This can either use bridging or
* routing, but the principle is the same: it uses the "tun" device to inject
* packets into the Host as if they came in from a normal network card. We
* just shunt packets between the Guest and the tun device. */
static void setup_tun_net(char *arg)
{
struct device *dev;
int netfd, ipfd;
u32 ip = INADDR_ANY;
bool bridging = false;
char tapif[IFNAMSIZ], *p;
struct virtio_net_config conf;
netfd = get_tun_device(tapif);
/* First we create a new network device. */
dev = new_device("net", VIRTIO_ID_NET, netfd, handle_tun_input);
/* Network devices need a receive and a send queue, just like
* console. */
add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
add_virtqueue(dev, VIRTQUEUE_NUM, net_enable_fd);
add_virtqueue(dev, VIRTQUEUE_NUM, handle_net_output);
/* We need a socket to perform the magic network ioctls to bring up the
@ -1364,28 +1523,56 @@ static void setup_tun_net(const char *arg)
/* If the command line was --tunnet=bridge:<name> do bridging. */
if (!strncmp(BRIDGE_PFX, arg, strlen(BRIDGE_PFX))) {
ip = INADDR_ANY;
br_name = arg + strlen(BRIDGE_PFX);
add_to_bridge(ipfd, ifr.ifr_name, br_name);
} else /* It is an IP address to set up the device with */
arg += strlen(BRIDGE_PFX);
bridging = true;
}
/* A mac address may follow the bridge name or IP address */
p = strchr(arg, ':');
if (p) {
str2mac(p+1, conf.mac);
*p = '\0';
} else {
p = arg + strlen(arg);
/* None supplied; query the randomly assigned mac. */
get_mac(ipfd, tapif, conf.mac);
}
/* arg is now either an IP address or a bridge name */
if (bridging)
add_to_bridge(ipfd, tapif, arg);
else
ip = str2ip(arg);
/* Set up the tun device, and get the mac address for the interface. */
configure_device(ipfd, ifr.ifr_name, ip, conf.mac);
/* Set up the tun device. */
configure_device(ipfd, tapif, ip);
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
/* Expect Guest to handle everything except UFO */
add_feature(dev, VIRTIO_NET_F_CSUM);
add_feature(dev, VIRTIO_NET_F_GUEST_CSUM);
add_feature(dev, VIRTIO_NET_F_MAC);
add_feature(dev, VIRTIO_NET_F_GUEST_TSO4);
add_feature(dev, VIRTIO_NET_F_GUEST_TSO6);
add_feature(dev, VIRTIO_NET_F_GUEST_ECN);
add_feature(dev, VIRTIO_NET_F_HOST_TSO4);
add_feature(dev, VIRTIO_NET_F_HOST_TSO6);
add_feature(dev, VIRTIO_NET_F_HOST_ECN);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */
close(ipfd);
verbose("device %u: tun net %u.%u.%u.%u\n",
devices.device_num++,
(u8)(ip>>24),(u8)(ip>>16),(u8)(ip>>8),(u8)ip);
if (br_name)
verbose("attached to bridge: %s\n", br_name);
devices.device_num++;
if (bridging)
verbose("device %u: tun %s attached to bridge: %s\n",
devices.device_num, tapif, arg);
else
verbose("device %u: tun %s: %s\n",
devices.device_num, tapif, arg);
}
/* Our block (disk) device should be really simple: the Guest asks for a block
@ -1550,7 +1737,7 @@ static bool handle_io_finish(int fd, struct device *dev)
}
/* When the Guest submits some I/O, we just need to wake the I/O thread. */
static void handle_virtblk_output(int fd, struct virtqueue *vq)
static void handle_virtblk_output(int fd, struct virtqueue *vq, bool timeout)
{
struct vblk_info *vblk = vq->dev->priv;
char c = 0;
@ -1621,6 +1808,64 @@ static void setup_block_file(const char *filename)
verbose("device %u: virtblock %llu sectors\n",
devices.device_num, le64_to_cpu(conf.capacity));
}
/* Our random number generator device reads from /dev/random into the Guest's
* input buffers. The usual case is that the Guest doesn't want random numbers
* and so has no buffers although /dev/random is still readable, whereas
* console is the reverse.
*
* The same logic applies, however. */
static bool handle_rng_input(int fd, struct device *dev)
{
int len;
unsigned int head, in_num, out_num, totlen = 0;
struct iovec iov[dev->vq->vring.num];
/* First we need a buffer from the Guests's virtqueue. */
head = get_vq_desc(dev->vq, iov, &out_num, &in_num);
/* If they're not ready for input, stop listening to this file
* descriptor. We'll start again once they add an input buffer. */
if (head == dev->vq->vring.num)
return false;
if (out_num)
errx(1, "Output buffers in rng?");
/* This is why we convert to iovecs: the readv() call uses them, and so
* it reads straight into the Guest's buffer. We loop to make sure we
* fill it. */
while (!iov_empty(iov, in_num)) {
len = readv(dev->fd, iov, in_num);
if (len <= 0)
err(1, "Read from /dev/random gave %i", len);
iov_consume(iov, in_num, len);
totlen += len;
}
/* Tell the Guest about the new input. */
add_used_and_trigger(fd, dev->vq, head, totlen);
/* Everything went OK! */
return true;
}
/* And this creates a "hardware" random number device for the Guest. */
static void setup_rng(void)
{
struct device *dev;
int fd;
fd = open_or_die("/dev/random", O_RDONLY);
/* The device responds to return from I/O thread. */
dev = new_device("rng", VIRTIO_ID_RNG, fd, handle_rng_input);
/* The device has one virtqueue, where the Guest places inbufs. */
add_virtqueue(dev, VIRTQUEUE_NUM, enable_fd);
verbose("device %u: rng\n", devices.device_num++);
}
/* That's the end of device setup. */
/*L:230 Reboot is pretty easy: clean up and exec() the Launcher afresh. */
@ -1628,11 +1873,12 @@ static void __attribute__((noreturn)) restart_guest(void)
{
unsigned int i;
/* Closing pipes causes the Waker thread and io_threads to die, and
* closing /dev/lguest cleans up the Guest. Since we don't track all
* open fds, we simply close everything beyond stderr. */
/* Since we don't track all open fds, we simply close everything beyond
* stderr. */
for (i = 3; i < FD_SETSIZE; i++)
close(i);
/* The exec automatically gets rid of the I/O and Waker threads. */
execv(main_args[0], main_args);
err(1, "Could not exec %s", main_args[0]);
}
@ -1663,7 +1909,7 @@ static void __attribute__((noreturn)) run_guest(int lguest_fd)
/* ERESTART means that we need to reboot the guest */
} else if (errno == ERESTART) {
restart_guest();
/* EAGAIN means the Waker wanted us to look at some input.
/* EAGAIN means a signal (timeout).
* Anything else means a bug or incompatible change. */
} else if (errno != EAGAIN)
err(1, "Running guest failed");
@ -1691,13 +1937,14 @@ static struct option opts[] = {
{ "verbose", 0, NULL, 'v' },
{ "tunnet", 1, NULL, 't' },
{ "block", 1, NULL, 'b' },
{ "rng", 0, NULL, 'r' },
{ "initrd", 1, NULL, 'i' },
{ NULL },
};
static void usage(void)
{
errx(1, "Usage: lguest [--verbose] "
"[--tunnet=(<ipaddr>|bridge:<bridgename>)\n"
"[--tunnet=(<ipaddr>:<macaddr>|bridge:<bridgename>:<macaddr>)\n"
"|--block=<filename>|--initrd=<filename>]...\n"
"<mem-in-mb> vmlinux [args...]");
}
@ -1765,6 +2012,9 @@ int main(int argc, char *argv[])
case 'b':
setup_block_file(optarg);
break;
case 'r':
setup_rng();
break;
case 'i':
initrd_name = optarg;
break;
@ -1783,6 +2033,9 @@ int main(int argc, char *argv[])
/* We always have a console device */
setup_console();
/* We can timeout waiting for Guest network transmit. */
setup_timeout();
/* Now we load the kernel */
start = load_kernel(open_or_die(argv[optind+1], O_RDONLY));
@ -1826,10 +2079,10 @@ int main(int argc, char *argv[])
* /dev/lguest file descriptor. */
lguest_fd = tell_kernel(pgdir, start);
/* We fork off a child process, which wakes the Launcher whenever one
* of the input file descriptors needs attention. We call this the
* Waker, and we'll cover it in a moment. */
waker_fd = setup_waker(lguest_fd);
/* We clone off a thread, which wakes the Launcher whenever one of the
* input file descriptors needs attention. We call this the Waker, and
* we'll cover it in a moment. */
setup_waker(lguest_fd);
/* Finally, run the Guest. This doesn't return. */
run_guest(lguest_fd);

2
Documentation/local_ops.txt
View File

@ -36,7 +36,7 @@ It can be done by slightly modifying the standard atomic operations : only
their UP variant must be kept. It typically means removing LOCK prefix (on
i386 and x86_64) and any SMP sychronization barrier. If the architecture does
not have a different behavior between SMP and UP, including asm-generic/local.h
in your archtecture's local.h is sufficient.
in your architecture's local.h is sufficient.
The local_t type is defined as an opaque signed long by embedding an
atomic_long_t inside a structure. This is made so a cast from this type to a

30
Documentation/md.txt
View File

@ -236,6 +236,11 @@ All md devices contain:
writing the word for the desired state, however some states
cannot be explicitly set, and some transitions are not allowed.
Select/poll works on this file. All changes except between
active_idle and active (which can be frequent and are not
very interesting) are notified. active->active_idle is
reported if the metadata is externally managed.
clear
No devices, no size, no level
Writing is equivalent to STOP_ARRAY ioctl
@ -292,6 +297,10 @@ Each directory contains:
writemostly - device will only be subject to read
requests if there are no other options.
This applies only to raid1 arrays.
blocked - device has failed, metadata is "external",
and the failure hasn't been acknowledged yet.
Writes that would write to this device if
it were not faulty are blocked.
spare - device is working, but not a full member.
This includes spares that are in the process
of being recovered to
@ -301,6 +310,12 @@ Each directory contains:
Writing "remove" removes the device from the array.
Writing "writemostly" sets the writemostly flag.
Writing "-writemostly" clears the writemostly flag.
Writing "blocked" sets the "blocked" flag.
Writing "-blocked" clear the "blocked" flag and allows writes
to complete.
This file responds to select/poll. Any change to 'faulty'
or 'blocked' causes an event.
errors
An approximate count of read errors that have been detected on
@ -332,7 +347,7 @@ Each directory contains:
for storage of data. This will normally be the same as the
component_size. This can be written while assembling an
array. If a value less than the current component_size is
written, component_size will be reduced to this value.
written, it will be rejected.
An active md device will also contain and entry for each active device
@ -381,6 +396,19 @@ also have
'check' and 'repair' will start the appropriate process
providing the current state is 'idle'.
This file responds to select/poll. Any important change in the value
triggers a poll event. Sometimes the value will briefly be
"recover" if a recovery seems to be needed, but cannot be
achieved. In that case, the transition to "recover" isn't
notified, but the transition away is.
degraded
This contains a count of the number of devices by which the
arrays is degraded. So an optimal array with show '0'. A
single failed/missing drive will show '1', etc.
This file responds to select/poll, any increase or decrease
in the count of missing devices will trigger an event.
mismatch_count
When performing 'check' and 'repair', and possibly when
performing 'resync', md will count the number of errors that are

386
Documentation/moxa-smartio
View File

@ -1,14 +1,22 @@
=============================================================================
MOXA Smartio/Industio Family Device Driver Installation Guide
for Linux Kernel 2.4.x, 2.6.x
Copyright (C) 2008, Moxa Inc.
=============================================================================
Date: 01/21/2008
MOXA Smartio Family Device Driver Ver 1.1 Installation Guide
for Linux Kernel 2.2.x and 2.0.3x
Copyright (C) 1999, Moxa Technologies Co, Ltd.
=============================================================================
Content
1. Introduction
2. System Requirement
3. Installation
3.1 Hardware installation
3.2 Driver files
3.3 Device naming convention
3.4 Module driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x.
3.6 Custom configuration
3.7 Verify driver installation
4. Utilities
5. Setserial
6. Troubleshooting
@ -16,27 +24,48 @@ Content
-----------------------------------------------------------------------------
1. Introduction
The Smartio family Linux driver, Ver. 1.1, supports following multiport
The Smartio/Industio/UPCI family Linux driver supports following multiport
boards.
-C104P/H/HS, C104H/PCI, C104HS/PCI, CI-104J 4 port multiport board.
-C168P/H/HS, C168H/PCI 8 port multiport board.
- 2 ports multiport board
CP-102U, CP-102UL, CP-102UF
CP-132U-I, CP-132UL,
CP-132, CP-132I, CP132S, CP-132IS,
CI-132, CI-132I, CI-132IS,
(C102H, C102HI, C102HIS, C102P, CP-102, CP-102S)
This driver has been modified a little and cleaned up from the Moxa
contributed driver code and merged into Linux 2.2.14pre. In particular
official major/minor numbers have been assigned which are different to
those the original Moxa supplied driver used.
- 4 ports multiport board
CP-104EL,
CP-104UL, CP-104JU,
CP-134U, CP-134U-I,
C104H/PCI, C104HS/PCI,
CP-114, CP-114I, CP-114S, CP-114IS, CP-114UL,
C104H, C104HS,
CI-104J, CI-104JS,
CI-134, CI-134I, CI-134IS,
(C114HI, CT-114I, C104P)
POS-104UL,
CB-114,
CB-134I
- 8 ports multiport board
CP-118EL, CP-168EL,
CP-118U, CP-168U,
C168H/PCI,
C168H, C168HS,
(C168P),
CB-108
This driver and installation procedure have been developed upon Linux Kernel
2.2.5 and backward compatible to 2.0.3x. This driver supports Intel x86 and
Alpha hardware platform. In order to maintain compatibility, this version
has also been properly tested with RedHat, OpenLinux, TurboLinux and
S.u.S.E Linux. However, if compatibility problem occurs, please contact
Moxa at support@moxa.com.tw.
2.4.x and 2.6.x. This driver supports Intel x86 hardware platform. In order
to maintain compatibility, this version has also been properly tested with
RedHat, Mandrake, Fedora and S.u.S.E Linux. However, if compatibility problem
occurs, please contact Moxa at support@moxa.com.tw.
In addition to device driver, useful utilities are also provided in this
version. They are
- msdiag Diagnostic program for detecting installed Moxa Smartio boards.
- msdiag Diagnostic program for displaying installed Moxa
Smartio/Industio boards.
- msmon Monitor program to observe data count and line status signals.
- msterm A simple terminal program which is useful in testing serial
ports.
@ -47,8 +76,7 @@ Content
GNU General Public License in this version. Please refer to GNU General
Public License announcement in each source code file for more detail.
In Moxa's ftp sites, you may always find latest driver at
ftp://ftp.moxa.com or ftp://ftp.moxa.com.tw.
In Moxa's Web sites, you may always find latest driver at http://web.moxa.com.
This version of driver can be installed as Loadable Module (Module driver)
or built-in into kernel (Static driver). You may refer to following
@ -61,8 +89,8 @@ Content
-----------------------------------------------------------------------------
2. System Requirement
- Hardware platform: Intel x86 or Alpha machine
- Kernel version: 2.0.3x or 2.2.x
- Hardware platform: Intel x86 machine
- Kernel version: 2.4.x or 2.6.x
- gcc version 2.72 or later
- Maximum 4 boards can be installed in combination
@ -70,9 +98,18 @@ Content
3. Installation
3.1 Hardware installation
3.2 Driver files
3.3 Device naming convention
3.4 Module driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x, 2.6.x.
3.6 Custom configuration
3.7 Verify driver installation
There are two types of buses, ISA and PCI, for Smartio family multiport
board.
3.1 Hardware installation
There are two types of buses, ISA and PCI, for Smartio/Industio
family multiport board.
ISA board
---------
@ -81,47 +118,57 @@ Content
installation procedure in User's Manual before proceed any further.
Please make sure the JP1 is open after the ISA board is set properly.
PCI board
---------
PCI/UPCI board
--------------
You may need to adjust IRQ usage in BIOS to avoid from IRQ conflict
with other ISA devices. Please refer to hardware installation
procedure in User's Manual in advance.
IRQ Sharing
PCI IRQ Sharing
-----------
Each port within the same multiport board shares the same IRQ. Up to
4 Moxa Smartio Family multiport boards can be installed together on
one system and they can share the same IRQ.
4 Moxa Smartio/Industio PCI Family multiport boards can be installed
together on one system and they can share the same IRQ.
3.2 Driver files and device naming convention
3.2 Driver files
The driver file may be obtained from ftp, CD-ROM or floppy disk. The
first step, anyway, is to copy driver file "mxser.tgz" into specified
directory. e.g. /moxa. The execute commands as below.
# cd /
# mkdir moxa
# cd /moxa
# tar xvf /dev/fd0
# tar xvf /dev/fd0
or
# cd /
# mkdir moxa
# cd /moxa
# cp /mnt/cdrom/<driver directory>/mxser.tgz .
# tar xvfz mxser.tgz
3.3 Device naming convention
You may find all the driver and utilities files in /moxa/mxser.
Following installation procedure depends on the model you'd like to
run the driver. If you prefer module driver, please refer to 3.3.
If static driver is required, please refer to 3.4.
run the driver. If you prefer module driver, please refer to 3.4.
If static driver is required, please refer to 3.5.
Dialin and callout port
-----------------------
This driver remains traditional serial device properties. There're
This driver remains traditional serial device properties. There are
two special file name for each serial port. One is dial-in port
which is named "ttyMxx". For callout port, the naming convention
is "cumxx".
Device naming when more than 2 boards installed
-----------------------------------------------
Naming convention for each Smartio multiport board is pre-defined
as below.
Naming convention for each Smartio/Industio multiport board is
pre-defined as below.
Board Num. Dial-in Port Callout port
1st board ttyM0 - ttyM7 cum0 - cum7
@ -129,6 +176,12 @@ Content
3rd board ttyM16 - ttyM23 cum16 - cum23
4th board ttyM24 - ttym31 cum24 - cum31
!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Under Kernel 2.6 the cum Device is Obsolete. So use ttyM*
device instead.
!!!!!!!!!!!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Board sequence
--------------
This driver will activate ISA boards according to the parameter set
@ -138,69 +191,131 @@ Content
For PCI boards, their sequence will be after ISA boards and C168H/PCI
has higher priority than C104H/PCI boards.
3.3 Module driver configuration
3.4 Module driver configuration
Module driver is easiest way to install. If you prefer static driver
installation, please skip this paragraph.
1. Find "Makefile" in /moxa/mxser, then run
# make install
The driver files "mxser.o" and utilities will be properly compiled
and copied to system directories respectively.Then run
------------- Prepare to use the MOXA driver--------------------
3.4.1 Create tty device with correct major number
Before using MOXA driver, your system must have the tty devices
which are created with driver's major number. We offer one shell
script "msmknod" to simplify the procedure.
This step is only needed to be executed once. But you still
need to do this procedure when:
a. You change the driver's major number. Please refer the "3.7"
section.
b. Your total installed MOXA boards number is changed. Maybe you
add/delete one MOXA board.
c. You want to change the tty name. This needs to modify the
shell script "msmknod"
# insmod mxser
to activate the modular driver. You may run "lsmod" to check
if "mxser.o" is activated.
2. Create special files by executing "msmknod".
The procedure is:
# cd /moxa/mxser/driver
# ./msmknod
Default major numbers for dial-in device and callout device are
174, 175. Msmknod will delete any special files occupying the same
device naming.
This shell script will require the major number for dial-in
device and callout device to create tty device. You also need
to specify the total installed MOXA board number. Default major
numbers for dial-in device and callout device are 30, 35. If
you need to change to other number, please refer section "3.7"
for more detailed procedure.
Msmknod will delete any special files occupying the same device
naming.
3. Up to now, you may manually execute "insmod mxser" to activate
this driver and run "rmmod mxser" to remove it. However, it's
better to have a boot time configuration to eliminate manual
operation.
Boot time configuration can be achieved by rc file. Run following
command for setting rc files.
3.4.2 Build the MOXA driver and utilities
Before using the MOXA driver and utilities, you need compile the
all the source code. This step is only need to be executed once.
But you still re-compile the source code if you modify the source
code. For example, if you change the driver's major number (see
"3.7" section), then you need to do this step again.
Find "Makefile" in /moxa/mxser, then run
# make clean; make install
!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
For Red Hat 9, Red Hat Enterprise Linux AS3/ES3/WS3 & Fedora Core1:
# make clean; make installsp1
For Red Hat Enterprise Linux AS4/ES4/WS4:
# make clean; make installsp2
!!!!!!!!!! NOTE !!!!!!!!!!!!!!!!!
The driver files "mxser.o" and utilities will be properly compiled
and copied to system directories respectively.
------------- Load MOXA driver--------------------
3.4.3 Load the MOXA driver
# modprobe mxser <argument>
will activate the module driver. You may run "lsmod" to check
if "mxser" is activated. If the MOXA board is ISA board, the
<argument> is needed. Please refer to section "3.4.5" for more
information.
------------- Load MOXA driver on boot --------------------
3.4.4 For the above description, you may manually execute
"modprobe mxser" to activate this driver and run
"rmmod mxser" to remove it.
However, it's better to have a boot time configuration to
eliminate manual operation. Boot time configuration can be
achieved by rc file. We offer one "rc.mxser" file to simplify
the procedure under "moxa/mxser/driver".
But if you use ISA board, please modify the "modprobe ..." command
to add the argument (see "3.4.5" section). After modifying the
rc.mxser, please try to execute "/moxa/mxser/driver/rc.mxser"
manually to make sure the modification is ok. If any error
encountered, please try to modify again. If the modification is
completed, follow the below step.
Run following command for setting rc files.
# cd /moxa/mxser/driver
# cp ./rc.mxser /etc/rc.d
# cd /etc/rc.d
You may have to modify part of the content in rc.mxser to specify
parameters for ISA board. Please refer to rc.mxser for more detail.
Find "rc.serial". If "rc.serial" doesn't exist, create it by vi.
Add "rc.mxser" in last line. Next, open rc.local by vi
and append following content.
Check "rc.serial" is existed or not. If "rc.serial" doesn't exist,
create it by vi, run "chmod 755 rc.serial" to change the permission.
Add "/etc/rc.d/rc.mxser" in last line,
if [ -f /etc/rc.d/rc.serial ]; then
sh /etc/rc.d/rc.serial
fi
Reboot and check if moxa.o activated by "lsmod" command.
4. Reboot and check if mxser.o activated by "lsmod" command.
5. If you'd like to drive Smartio ISA boards in the system, you'll
have to add parameter to specify CAP address of given board while
activating "mxser.o". The format for parameters are as follows.
3.4.5. If you'd like to drive Smartio/Industio ISA boards in the system,
you'll have to add parameter to specify CAP address of given
board while activating "mxser.o". The format for parameters are
as follows.
insmod mxser ioaddr=0x???,0x???,0x???,0x???
modprobe mxser ioaddr=0x???,0x???,0x???,0x???
| | | |
| | | +- 4th ISA board
| | +------ 3rd ISA board
| +------------ 2nd ISA board
+------------------- 1st ISA board
3.4 Static driver configuration
3.5 Static driver configuration for Linux kernel 2.4.x and 2.6.x
1. Create link
Note: To use static driver, you must install the linux kernel
source package.
3.5.1 Backup the built-in driver in the kernel.
# cd /usr/src/linux/drivers/char
# mv mxser.c mxser.c.old
For Red Hat 7.x user, you need to create link:
# cd /usr/src
# ln -s linux-2.4 linux
3.5.2 Create link
# cd /usr/src/linux/drivers/char
# ln -s /moxa/mxser/driver/mxser.c mxser.c
2. Add CAP address list for ISA boards
3.5.3 Add CAP address list for ISA boards. For PCI boards user,
please skip this step.
In module mode, the CAP address for ISA board is given by
parameter. In static driver configuration, you'll have to
assign it within driver's source code. If you will not
@ -222,73 +337,55 @@ Content
static int mxserBoardCAP[]
= {0x280, 0x180, 0x00, 0x00};
3. Modify tty_io.c
# cd /usr/src/linux/drivers/char/
# vi tty_io.c
Find pty_init(), insert "mxser_init()" as
3.5.4 Setup kernel configuration
pty_init();
mxser_init();
Configure the kernel:
4. Modify tty.h
# cd /usr/src/linux/include/linux
# vi tty.h
Find extern int tty_init(void), insert "mxser_init()" as
# cd /usr/src/linux
# make menuconfig
extern int tty_init(void);
extern int mxser_init(void);
5. Modify Makefile
# cd /usr/src/linux/drivers/char
# vi Makefile
Find L_OBJS := tty_io.o ...... random.o, add
"mxser.o" at last of this line as
L_OBJS := tty_io.o ....... mxser.o
You will go into a menu-driven system. Please select [Character
devices][Non-standard serial port support], enable the [Moxa
SmartIO support] driver with "[*]" for built-in (not "[M]"), then
select [Exit] to exit this program.
6. Rebuild kernel
The following are for Linux kernel rebuilding,for your reference only.
3.5.5 Rebuild kernel
The following are for Linux kernel rebuilding, for your
reference only.
For appropriate details, please refer to the Linux document.
If 'lilo' utility is installed, please use 'make zlilo' to rebuild
kernel. If 'lilo' is not installed, please follow the following steps.
a. cd /usr/src/linux
b. make clean /* take a few minutes */
c. make bzImage /* take probably 10-20 minutes */
d. Backup original boot kernel. /* optional step */
e. cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz
b. make clean /* take a few minutes */
c. make dep /* take a few minutes */
d. make bzImage /* take probably 10-20 minutes */
e. make install /* copy boot image to correct position */
f. Please make sure the boot kernel (vmlinuz) is in the
correct position. If you use 'lilo' utility, you should
check /etc/lilo.conf 'image' item specified the path
which is the 'vmlinuz' path, or you will load wrong
(or old) boot kernel image (vmlinuz).
g. chmod 400 /vmlinuz
h. lilo
i. rdev -R /vmlinuz 1
j. sync
correct position.
g. If you use 'lilo' utility, you should check /etc/lilo.conf
'image' item specified the path which is the 'vmlinuz' path,
or you will load wrong (or old) boot kernel image (vmlinuz).
After checking /etc/lilo.conf, please run "lilo".
Note that if the result of "make zImage" is ERROR, then you have to
go back to Linux configuration Setup. Type "make config" in directory
/usr/src/linux or "setup".
Note that if the result of "make bzImage" is ERROR, then you have to
go back to Linux configuration Setup. Type "make menuconfig" in
directory /usr/src/linux.
Since system include file, /usr/src/linux/include/linux/interrupt.h,
is modified each time the MOXA driver is installed, kernel rebuilding
is inevitable. And it takes about 10 to 20 minutes depends on the
machine.
7. Make utility
# cd /moxa/mxser/utility
# make install
8. Make special file
3.5.6 Make tty device and special file
# cd /moxa/mxser/driver
# ./msmknod
9. Reboot
3.5.7 Make utility
# cd /moxa/mxser/utility
# make clean; make install
3.5 Custom configuration
3.5.8 Reboot
3.6 Custom configuration
Although this driver already provides you default configuration, you
still can change the device name and major number.The instruction to
still can change the device name and major number. The instruction to
change these parameters are shown as below.
Change Device name
@ -306,33 +403,37 @@ Content
2 free major numbers for this driver. There are 3 steps to change
major numbers.
1. Find free major numbers
3.6.1 Find free major numbers
In /proc/devices, you may find all the major numbers occupied
in the system. Please select 2 major numbers that are available.
e.g. 40, 45.
2. Create special files
3.6.2 Create special files
Run /moxa/mxser/driver/msmknod to create special files with
specified major numbers.
3. Modify driver with new major number
3.6.3 Modify driver with new major number
Run vi to open /moxa/mxser/driver/mxser.c. Locate the line
contains "MXSERMAJOR". Change the content as below.
#define MXSERMAJOR 40
#define MXSERCUMAJOR 45
4. Run # make install in /moxa/mxser/driver.
3.6.4 Run "make clean; make install" in /moxa/mxser/driver.
3.6 Verify driver installation
3.7 Verify driver installation
You may refer to /var/log/messages to check the latest status
log reported by this driver whenever it's activated.
-----------------------------------------------------------------------------
4. Utilities
There are 3 utilities contained in this driver. They are msdiag, msmon and
msterm. These 3 utilities are released in form of source code. They should
be compiled into executable file and copied into /usr/bin.
Before using these utilities, please load driver (refer 3.4 & 3.5) and
make sure you had run the "msmknod" utility.
msdiag - Diagnostic
--------------------
This utility provides the function to detect what Moxa Smartio multiport
board exists in the system.
This utility provides the function to display what Moxa Smartio/Industio
board found by driver in the system.
msmon - Port Monitoring
-----------------------
@ -353,12 +454,13 @@ Content
application, for example, sending AT command to a modem connected to the
port or used as a terminal for login purpose. Note that this is only a
dumb terminal emulation without handling full screen operation.
-----------------------------------------------------------------------------
5. Setserial
Supported Setserial parameters are listed as below.
uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
uart set UART type(16450-->disable FIFO, 16550A-->enable FIFO)
close_delay set the amount of time(in 1/100 of a second) that DTR
should be kept low while being closed.
closing_wait set the amount of time(in 1/100 of a second) that the
@ -366,7 +468,13 @@ Content
being closed, before the receiver is disable.
spd_hi Use 57.6kb when the application requests 38.4kb.
spd_vhi Use 115.2kb when the application requests 38.4kb.
spd_shi Use 230.4kb when the application requests 38.4kb.
spd_warp Use 460.8kb when the application requests 38.4kb.
spd_normal Use 38.4kb when the application requests 38.4kb.
spd_cust Use the custom divisor to set the speed when the
application requests 38.4kb.
divisor This option set the custom divison.
baud_base This option set the base baud rate.
-----------------------------------------------------------------------------
6. Troubleshooting
@ -375,8 +483,9 @@ Content
possible. If all the possible solutions fail, please contact our technical
support team to get more help.
Error msg: More than 4 Moxa Smartio family boards found. Fifth board and
after are ignored.
Error msg: More than 4 Moxa Smartio/Industio family boards found. Fifth board
and after are ignored.
Solution:
To avoid this problem, please unplug fifth and after board, because Moxa
driver supports up to 4 boards.
@ -384,7 +493,7 @@ Content
Error msg: Request_irq fail, IRQ(?) may be conflict with another device.
Solution:
Other PCI or ISA devices occupy the assigned IRQ. If you are not sure
which device causes the situation,please check /proc/interrupts to find
which device causes the situation, please check /proc/interrupts to find
free IRQ and simply change another free IRQ for Moxa board.
Error msg: Board #: C1xx Series(CAP=xxx) interrupt number invalid.
@ -397,15 +506,18 @@ Content
Moxa ISA board needs an interrupt vector.Please refer to user's manual
"Hardware Installation" chapter to set interrupt vector.
Error msg: Couldn't install MOXA Smartio family driver!
Error msg: Couldn't install MOXA Smartio/Industio family driver!
Solution:
Load Moxa driver fail, the major number may conflict with other devices.
Please refer to previous section 3.5 to change a free major number for
Please refer to previous section 3.7 to change a free major number for
Moxa driver.
Error msg: Couldn't install MOXA Smartio family callout driver!
Error msg: Couldn't install MOXA Smartio/Industio family callout driver!
Solution:
Load Moxa callout driver fail, the callout device major number may
conflict with other devices. Please refer to previous section 3.5 to
conflict with other devices. Please refer to previous section 3.7 to
change a free callout device major number for Moxa driver.
-----------------------------------------------------------------------------

2
Documentation/networking/bonding.txt
View File

@ -631,7 +631,7 @@ xmit_hash_policy
in environments where a layer3 gateway device is
required to reach most destinations.
This algorithm is 802.3ad complient.
This algorithm is 802.3ad compliant.
layer3+4

4
Documentation/networking/can.txt
View File

@ -186,7 +186,7 @@ solution for a couple of reasons:
The Linux network devices (by default) just can handle the
transmission and reception of media dependent frames. Due to the
arbritration on the CAN bus the transmission of a low prio CAN-ID
arbitration on the CAN bus the transmission of a low prio CAN-ID
may be delayed by the reception of a high prio CAN frame. To
reflect the correct* traffic on the node the loopback of the sent
data has to be performed right after a successful transmission. If
@ -481,7 +481,7 @@ solution for a couple of reasons:
- stats_timer: To calculate the Socket CAN core statistics
(e.g. current/maximum frames per second) this 1 second timer is
invoked at can.ko module start time by default. This timer can be
disabled by using stattimer=0 on the module comandline.
disabled by using stattimer=0 on the module commandline.
- debug: (removed since SocketCAN SVN r546)

14
Documentation/networking/e1000.txt
View File

@ -513,21 +513,11 @@ Additional Configurations
Intel(R) PRO/1000 PT Dual Port Server Connection
Intel(R) PRO/1000 PT Dual Port Server Adapter
Intel(R) PRO/1000 PF Dual Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
Intel(R) PRO/1000 PT Quad Port Server Adapter
NAPI
----
NAPI (Rx polling mode) is supported in the e1000 driver. NAPI is enabled
or disabled based on the configuration of the kernel. To override
the default, use the following compile-time flags.
To enable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NAPI install
To disable NAPI, compile the driver module, passing in a configuration option:
make CFLAGS_EXTRA=-DE1000_NO_NAPI install
NAPI (Rx polling mode) is enabled in the e1000 driver.
See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.

2
Documentation/networking/packet_mmap.txt
View File

@ -326,7 +326,7 @@ just one call to mmap is needed:
mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
If tp_frame_size is a divisor of tp_block_size frames will be
contiguosly spaced by tp_frame_size bytes. If not, each
contiguously spaced by tp_frame_size bytes. If not, each
tp_block_size/tp_frame_size frames there will be a gap between
the frames. This is because a frame cannot be spawn across two
blocks.

15
Documentation/networking/tc-actions-env-rules.txt
View File

@ -4,26 +4,27 @@ The "enviromental" rules for authors of any new tc actions are:
1) If you stealeth or borroweth any packet thou shalt be branching
from the righteous path and thou shalt cloneth.
For example if your action queues a packet to be processed later
or intentionaly branches by redirecting a packet then you need to
For example if your action queues a packet to be processed later,
or intentionally branches by redirecting a packet, then you need to
clone the packet.
There are certain fields in the skb tc_verd that need to be reset so we
avoid loops etc. A few are generic enough so much so that skb_act_clone()
resets them for you. So invoke skb_act_clone() rather than skb_clone()
avoid loops, etc. A few are generic enough that skb_act_clone()
resets them for you, so invoke skb_act_clone() rather than skb_clone().
2) If you munge any packet thou shalt call pskb_expand_head in the case
someone else is referencing the skb. After that you "own" the skb.
You must also tell us if it is ok to munge the packet (TC_OK2MUNGE),
this way any action downstream can stomp on the packet.
3) dropping packets you dont own is a nono. You simply return
3) Dropping packets you don't own is a no-no. You simply return
TC_ACT_SHOT to the caller and they will drop it.
The "enviromental" rules for callers of actions (qdiscs etc) are:
*) thou art responsible for freeing anything returned as being
*) Thou art responsible for freeing anything returned as being
TC_ACT_SHOT/STOLEN/QUEUED. If none of TC_ACT_SHOT/STOLEN/QUEUED is
returned then all is great and you dont need to do anything.
returned, then all is great and you don't need to do anything.
Post on netdev if something is unclear.

2
Documentation/networking/udplite.txt
View File

@ -148,7 +148,7 @@
getsockopt(sockfd, SOL_SOCKET, SO_NO_CHECK, &value, ...);
is meaningless (as in TCP). Packets with a zero checksum field are
illegal (cf. RFC 3828, sec. 3.1) will be silently discarded.
illegal (cf. RFC 3828, sec. 3.1) and will be silently discarded.
4) Fragmentation

4
Documentation/power/00-INDEX
View File

@ -1,5 +1,7 @@
00-INDEX
- This file
apm-acpi.txt
- basic info about the APM and ACPI support.
basic-pm-debugging.txt
- Debugging suspend and resume
devices.txt
@ -14,8 +16,6 @@ notifiers.txt
- Registering suspend notifiers in device drivers
pci.txt
- How the PCI Subsystem Does Power Management
pm.txt
- info on Linux power management support.
pm_qos_interface.txt
- info on Linux PM Quality of Service interface
power_supply_class.txt

32
Documentation/power/apm-acpi.txt Normal file
View File

@ -0,0 +1,32 @@
APM or ACPI?
------------
If you have a relatively recent x86 mobile, desktop, or server system,
odds are it supports either Advanced Power Management (APM) or
Advanced Configuration and Power Interface (ACPI). ACPI is the newer
of the two technologies and puts power management in the hands of the
operating system, allowing for more intelligent power management than
is possible with BIOS controlled APM.
The best way to determine which, if either, your system supports is to
build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
enabled by default). If a working ACPI implementation is found, the
ACPI driver will override and disable APM, otherwise the APM driver
will be used.
No, sorry, you cannot have both ACPI and APM enabled and running at
once. Some people with broken ACPI or broken APM implementations
would like to use both to get a full set of working features, but you
simply cannot mix and match the two. Only one power management
interface can be in control of the machine at once. Think about it..
User-space Daemons
------------------
Both APM and ACPI rely on user-space daemons, apmd and acpid
respectively, to be completely functional. Obtain both of these
daemons from your Linux distribution or from the Internet (see below)
and be sure that they are started sometime in the system boot process.
Go ahead and start both. If ACPI or APM is not available on your
system the associated daemon will exit gracefully.
apmd: http://worldvisions.ca/~apenwarr/apmd/
acpid: http://acpid.sf.net/

257
Documentation/power/pm.txt
View File

@ -1,257 +0,0 @@
Linux Power Management Support
This document briefly describes how to use power management with your
Linux system and how to add power management support to Linux drivers.
APM or ACPI?
------------
If you have a relatively recent x86 mobile, desktop, or server system,
odds are it supports either Advanced Power Management (APM) or
Advanced Configuration and Power Interface (ACPI). ACPI is the newer
of the two technologies and puts power management in the hands of the
operating system, allowing for more intelligent power management than
is possible with BIOS controlled APM.
The best way to determine which, if either, your system supports is to
build a kernel with both ACPI and APM enabled (as of 2.3.x ACPI is
enabled by default). If a working ACPI implementation is found, the
ACPI driver will override and disable APM, otherwise the APM driver
will be used.
No, sorry, you cannot have both ACPI and APM enabled and running at
once. Some people with broken ACPI or broken APM implementations
would like to use both to get a full set of working features, but you
simply cannot mix and match the two. Only one power management
interface can be in control of the machine at once. Think about it..
User-space Daemons
------------------
Both APM and ACPI rely on user-space daemons, apmd and acpid
respectively, to be completely functional. Obtain both of these
daemons from your Linux distribution or from the Internet (see below)
and be sure that they are started sometime in the system boot process.
Go ahead and start both. If ACPI or APM is not available on your
system the associated daemon will exit gracefully.
apmd: http://worldvisions.ca/~apenwarr/apmd/
acpid: http://acpid.sf.net/
Driver Interface -- OBSOLETE, DO NOT USE!
----------------*************************
Note: pm_register(), pm_access(), pm_dev_idle() and friends are
obsolete. Please do not use them. Instead you should properly hook
your driver into the driver model, and use its suspend()/resume()
callbacks to do this kind of stuff.
If you are writing a new driver or maintaining an old driver, it
should include power management support. Without power management
support, a single driver may prevent a system with power management
capabilities from ever being able to suspend (safely).
Overview:
1) Register each instance of a device with "pm_register"
2) Call "pm_access" before accessing the hardware.
(this will ensure that the hardware is awake and ready)
3) Your "pm_callback" is called before going into a
suspend state (ACPI D1-D3) or after resuming (ACPI D0)
from a suspend.
4) Call "pm_dev_idle" when the device is not being used
(optional but will improve device idle detection)
5) When unloaded, unregister the device with "pm_unregister"
/*
* Description: Register a device with the power-management subsystem
*
* Parameters:
* type - device type (PCI device, system device, ...)
* id - instance number or unique identifier
* cback - request handler callback (suspend, resume, ...)
*
* Returns: Registered PM device or NULL on error
*
* Examples:
* dev = pm_register(PM_SYS_DEV, PM_SYS_VGA, vga_callback);
*
* struct pci_dev *pci_dev = pci_find_dev(...);
* dev = pm_register(PM_PCI_DEV, PM_PCI_ID(pci_dev), callback);
*/
struct pm_dev *pm_register(pm_dev_t type, unsigned long id, pm_callback cback);
/*
* Description: Unregister a device with the power management subsystem
*
* Parameters:
* dev - PM device previously returned from pm_register
*/
void pm_unregister(struct pm_dev *dev);
/*
* Description: Unregister all devices with a matching callback function
*
* Parameters:
* cback - previously registered request callback
*
* Notes: Provided for easier porting from old APM interface
*/
void pm_unregister_all(pm_callback cback);
/*
* Power management request callback
*
* Parameters:
* dev - PM device previously returned from pm_register
* rqst - request type
* data - data, if any, associated with the request
*
* Returns: 0 if the request is successful
* EINVAL if the request is not supported
* EBUSY if the device is now busy and cannot handle the request
* ENOMEM if the device was unable to handle the request due to memory
*
* Details: The device request callback will be called before the
* device/system enters a suspend state (ACPI D1-D3) or
* or after the device/system resumes from suspend (ACPI D0).
* For PM_SUSPEND, the ACPI D-state being entered is passed
* as the "data" argument to the callback. The device
* driver should save (PM_SUSPEND) or restore (PM_RESUME)
* device context when the request callback is called.
*
* Once a driver returns 0 (success) from a suspend
* request, it should not process any further requests or
* access the device hardware until a call to "pm_access" is made.
*/
typedef int (*pm_callback)(struct pm_dev *dev, pm_request_t rqst, void *data);
Driver Details
--------------
This is just a quick Q&A as a stopgap until a real driver writers'
power management guide is available.
Q: When is a device suspended?
Devices can be suspended based on direct user request (eg. laptop lid
closes), system power policy (eg. sleep after 30 minutes of console
inactivity), or device power policy (eg. power down device after 5
minutes of inactivity)
Q: Must a driver honor a suspend request?
No, a driver can return -EBUSY from a suspend request and this
will stop the system from suspending. When a suspend request
fails, all suspended devices are resumed and the system continues
to run. Suspend can be retried at a later time.
Q: Can the driver block suspend/resume requests?
Yes, a driver can delay its return from a suspend or resume
request until the device is ready to handle requests. It
is advantageous to return as quickly as possible from a
request as suspend/resume are done serially.
Q: What context is a suspend/resume initiated from?
A suspend or resume is initiated from a kernel thread context.
It is safe to block, allocate memory, initiate requests
or anything else you can do within the kernel.
Q: Will requests continue to arrive after a suspend?
Possibly. It is the driver's responsibility to queue(*),
fail, or drop any requests that arrive after returning
success to a suspend request. It is important that the
driver not access its device until after it receives
a resume request as the device's bus may no longer
be active.
(*) If a driver queues requests for processing after
resume be aware that the device, network, etc.
might be in a different state than at suspend time.
It's probably better to drop requests unless
the driver is a storage device.
Q: Do I have to manage bus-specific power management registers
No. It is the responsibility of the bus driver to manage
PCI, USB, etc. power management registers. The bus driver
or the power management subsystem will also enable any
wake-on functionality that the device has.
Q: So, really, what do I need to do to support suspend/resume?
You need to save any device context that would
be lost if the device was powered off and then restore
it at resume time. When ACPI is active, there are
three levels of device suspend states; D1, D2, and D3.
(The suspend state is passed as the "data" argument
to the device callback.) With D3, the device is powered
off and loses all context, D1 and D2 are shallower power
states and require less device context to be saved. To
play it safe, just save everything at suspend and restore
everything at resume.
Q: Where do I store device context for suspend?
Anywhere in memory, kmalloc a buffer or store it
in the device descriptor. You are guaranteed that the
contents of memory will be restored and accessible
before resume, even when the system suspends to disk.
Q: What do I need to do for ACPI vs. APM vs. etc?
Drivers need not be aware of the specific power management
technology that is active. They just need to be aware
of when the overlying power management system requests
that they suspend or resume.
Q: What about device dependencies?
When a driver registers a device, the power management
subsystem uses the information provided to build a
tree of device dependencies (eg. USB device X is on
USB controller Y which is on PCI bus Z) When power
management wants to suspend a device, it first sends
a suspend request to its driver, then the bus driver,
and so on up to the system bus. Device resumes
proceed in the opposite direction.
Q: Who do I contact for additional information about
enabling power management for my specific driver/device?
ACPI Development mailing list: linux-acpi@vger.kernel.org
System Interface -- OBSOLETE, DO NOT USE!
----------------*************************
If you are providing new power management support to Linux (ie.
adding support for something like APM or ACPI), you should
communicate with drivers through the existing generic power
management interface.
/*
* Send a request to all devices
*
* Parameters:
* rqst - request type
* data - data, if any, associated with the request
*
* Returns: 0 if the request is successful
* See "pm_callback" return for errors
*
* Details: Walk list of registered devices and call pm_send
* for each until complete or an error is encountered.
* If an error is encountered for a suspend request,
* return all devices to the state they were in before
* the suspend request.
*/
int pm_send_all(pm_request_t rqst, void *data);
/*
* Find a matching device
*
* Parameters:
* type - device type (PCI device, system device, or 0 to match all devices)
* from - previous match or NULL to start from the beginning
*
* Returns: Matching device or NULL if none found
*/
struct pm_dev *pm_find(pm_dev_t type, struct pm_dev *from);

254
Documentation/powerpc/booting-without-of.txt
View File

@ -59,6 +59,7 @@ Table of Contents
p) Freescale Synchronous Serial Interface
q) USB EHCI controllers
r) MDIO on GPIOs
s) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@ -89,10 +90,12 @@ Table of Contents
3) OpenPIC Interrupt Controllers
4) ISA Interrupt Controllers
VIII - Specifying GPIO information for devices
IX - Specifying GPIO information for devices
1) gpios property
2) gpio-controller nodes
X - Specifying device power management information (sleep property)
Appendix A - Sample SOC node for MPC8540
@ -705,7 +708,7 @@ device or bus to be described by the device tree.
In general, the format of an address for a device is defined by the
parent bus type, based on the #address-cells and #size-cells
properties. Note that the parent's parent definitions of #address-cells
and #size-cells are not inhereted so every node with children must specify
and #size-cells are not inherited so every node with children must specify
them. The kernel requires the root node to have those properties defining
addresses format for devices directly mapped on the processor bus.
@ -1774,7 +1777,7 @@ platforms are moved over to use the flattened-device-tree model.
Xilinx uartlite devices are simple fixed speed serial ports.
Requred properties:
Required properties:
- current-speed : Baud rate of uartlite
v) Xilinx hwicap
@ -1796,7 +1799,7 @@ platforms are moved over to use the flattened-device-tree model.
Xilinx UART 16550 devices are very similar to the NS16550 but with
different register spacing and an offset from the base address.
Requred properties:
Required properties:
- clock-frequency : Frequency of the clock input
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
@ -1881,6 +1884,62 @@ platforms are moved over to use the flattened-device-tree model.
&qe_pio_c 6>;
};
s) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
discussion, it is assumed that the system's SPI controller is in
SPI master mode. This binding does not describe SPI controllers
in slave mode.
The SPI master node requires the following properties:
- #address-cells - number of cells required to define a chip select
address on the SPI bus.
- #size-cells - should be zero.
- compatible - name of SPI bus controller following generic names
recommended practice.
No other properties are required in the SPI bus node. It is assumed
that a driver for an SPI bus device will understand that it is an SPI bus.
However, the binding does not attempt to define the specific method for
assigning chip select numbers. Since SPI chip select configuration is
flexible and non-standardized, it is left out of this binding with the
assumption that board specific platform code will be used to manage
chip selects. Individual drivers can define additional properties to
support describing the chip select layout.
SPI slave nodes must be children of the SPI master node and can
contain the following properties.
- reg - (required) chip select address of device.
- compatible - (required) name of SPI device following generic names
recommended practice
- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
- spi-cpol - (optional) Empty property indicating device requires
inverse clock polarity (CPOL) mode
- spi-cpha - (optional) Empty property indicating device requires
shifted clock phase (CPHA) mode
SPI example for an MPC5200 SPI bus:
spi@f00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
interrupt-parent = <&mpc5200_pic>;
ethernet-switch@0 {
compatible = "micrel,ks8995m";
spi-max-frequency = <1000000>;
reg = <0>;
};
codec@1 {
compatible = "ti,tlv320aic26";
spi-max-frequency = <100000>;
reg = <1>;
};
};
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
@ -1894,7 +1953,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd.
1) The /system-controller node
This node is used to represent the system-controller and must be
present when the system uses a system contller chip. The top-level
present when the system uses a system controller chip. The top-level
system-controller node contains information that is global to all
devices within the system controller chip. The node name begins
with "system-controller" followed by the unit address, which is
@ -2488,8 +2547,8 @@ encodings listed below:
2 = high to low edge sensitive type enabled
3 = low to high edge sensitive type enabled
VIII - Specifying GPIO information for devices
==============================================
IX - Specifying GPIO information for devices
============================================
1) gpios property
-----------------
@ -2537,116 +2596,151 @@ Example of two SOC GPIO banks defined as gpio-controller nodes:
gpio-controller;
};
X - Specifying Device Power Management Information (sleep property)
===================================================================
Devices on SOCs often have mechanisms for placing devices into low-power
states that are decoupled from the devices' own register blocks. Sometimes,
this information is more complicated than a cell-index property can
reasonably describe. Thus, each device controlled in such a manner
may contain a "sleep" property which describes these connections.
The sleep property consists of one or more sleep resources, each of
which consists of a phandle to a sleep controller, followed by a
controller-specific sleep specifier of zero or more cells.
The semantics of what type of low power modes are possible are defined
by the sleep controller. Some examples of the types of low power modes
that may be supported are:
- Dynamic: The device may be disabled or enabled at any time.
- System Suspend: The device may request to be disabled or remain
awake during system suspend, but will not be disabled until then.
- Permanent: The device is disabled permanently (until the next hard
reset).
Some devices may share a clock domain with each other, such that they should
only be suspended when none of the devices are in use. Where reasonable,
such nodes should be placed on a virtual bus, where the bus has the sleep
property. If the clock domain is shared among devices that cannot be
reasonably grouped in this manner, then create a virtual sleep controller
(similar to an interrupt nexus, except that defining a standardized
sleep-map should wait until its necessity is demonstrated).
Appendix A - Sample SOC node for MPC8540
========================================
Note that the #address-cells and #size-cells for the SoC node
in this example have been explicitly listed; these are likely
not necessary as they are usually the same as the root node.
soc8540@e0000000 {
soc@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
compatible = "fsl,mpc8540-ccsr", "simple-bus";
device_type = "soc";
ranges = <00000000 e0000000 00100000>
reg = <e0000000 00003000>;
ranges = <0x00000000 0xe0000000 0x00100000>
bus-frequency = <0>;
mdio@24520 {
reg = <24520 20>;
device_type = "mdio";
compatible = "gianfar";
ethernet-phy@0 {
linux,phandle = <2452000>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452002>
interrupt-parent = <40000>;
interrupts = <35 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
interrupt-parent = <&pic>;
ethernet@24000 {
#size-cells = <0>;
#address-cells = <1>;
#size-cells = <1>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
compatible = "gianfar", "simple-bus";
reg = <0x24000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <29 2 30 2 34 2>;
phy-handle = <&phy0>;
sleep = <&pmc 00000080>;
ranges;
mdio@24520 {
reg = <0x24520 0x20>;
compatible = "fsl,gianfar-mdio";
phy0: ethernet-phy@0 {
interrupts = <5 1>;
reg = <0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1>;
reg = <1>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <7 1>;
reg = <3>;
device_type = "ethernet-phy";
};
};
};
ethernet@25000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
reg = <0x25000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
phy-handle = <&phy1>;
sleep = <&pmc 00000040>;
};
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
device_type = "network";
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
reg = <0x26000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <41 2>;
phy-handle = <&phy3>;
sleep = <&pmc 00000020>;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <1a 3>;
interrupt-parent = <40000>;
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8540-duart", "simple-bus";
sleep = <&pmc 00000002>;
ranges;
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
};
};
pic@40000 {
linux,phandle = <40000>;
pic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
reg = <40000 40000>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
i2c@3000 {
interrupt-parent = <40000>;
interrupts = <1b 3>;
reg = <3000 18>;
device_type = "i2c";
interrupts = <43 2>;
reg = <0x3000 0x100>;
compatible = "fsl-i2c";
dfsrr;
sleep = <&pmc 00000004>;
};
pmc: power@e0070 {
compatible = "fsl,mpc8540-pmc", "fsl,mpc8548-pmc";
reg = <0xe0070 0x20>;
};
};

38
Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt Normal file
View File

@ -0,0 +1,38 @@
Every GPIO controller node must have #gpio-cells property defined,
this information will be used to translate gpio-specifiers.
On CPM1 devices, all ports are using slightly different register layouts.
Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
On CPM2 devices, all ports are 32bit ports and use a common register layout.
Required properties:
- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
"fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
"fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional paramters (currently unused).
- gpio-controller : Marks the port as GPIO controller.
Example of three SOC GPIO banks defined as gpio-controller nodes:
CPM1_PIO_A: gpio-controller@950 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-a";
reg = <0x950 0x10>;
gpio-controller;
};
CPM1_PIO_B: gpio-controller@ab8 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-b";
reg = <0xab8 0x10>;
gpio-controller;
};
CPM1_PIO_E: gpio-controller@ac8 {
#gpio-cells = <2>;
compatible = "fsl,cpm1-pario-bank-e";
reg = <0xac8 0x18>;
gpio-controller;
};

53
Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt
View File

@ -1,22 +1,37 @@
* USB (Universal Serial Bus Controller)
Freescale QUICC Engine USB Controller
Required properties:
- compatible : could be "qe_udc" or "fhci-hcd".
- mode : the could be "host" or "slave".
- reg : Offset and length of the register set for the device
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- compatible : should be "fsl,<chip>-qe-usb", "fsl,mpc8323-qe-usb".
- reg : the first two cells should contain usb registers location and
length, the next two two cells should contain PRAM location and
length.
- interrupts : should contain USB interrupt.
- interrupt-parent : interrupt source phandle.
- fsl,fullspeed-clock : specifies the full speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- fsl,lowspeed-clock : specifies the low speed USB clock source:
"none": clock source is disabled
"brg1" through "brg16": clock source is BRG1-BRG16, respectively
"clk1" through "clk24": clock source is CLK1-CLK24, respectively
- hub-power-budget : USB power budget for the root hub, in mA.
- gpios : should specify GPIOs in this order: USBOE, USBTP, USBTN, USBRP,
USBRN, SPEED (optional), and POWER (optional).
Example(slave):
usb@6c0 {
compatible = "qe_udc";
reg = <6c0 40>;
interrupts = <8b 0>;
interrupt-parent = <700>;
mode = "slave";
};
Example:
usb@6c0 {
compatible = "fsl,mpc8360-qe-usb", "fsl,mpc8323-qe-usb";
reg = <0x6c0 0x40 0x8b00 0x100>;
interrupts = <11>;
interrupt-parent = <&qeic>;
fsl,fullspeed-clock = "clk21";
gpios = <&qe_pio_b 2 0 /* USBOE */
&qe_pio_b 3 0 /* USBTP */
&qe_pio_b 8 0 /* USBTN */
&qe_pio_b 9 0 /* USBRP */
&qe_pio_b 11 0 /* USBRN */
&qe_pio_e 20 0 /* SPEED */
&qe_pio_e 21 0 /* POWER */>;
};

17
Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt Normal file
View File

@ -0,0 +1,17 @@
Freescale MPC8349E-mITX-compatible Power Management Micro Controller Unit (MCU)
Required properties:
- compatible : "fsl,<mcu-chip>-<board>", "fsl,mcu-mpc8349emitx".
- reg : should specify I2C address (0x0a).
- #gpio-cells : should be 2.
- gpio-controller : should be present.
Example:
mcu@0a {
#gpio-cells = <2>;
compatible = "fsl,mc9s08qg8-mpc8349emitx",
"fsl,mcu-mpc8349emitx";
reg = <0x0a>;
gpio-controller;
};

63
Documentation/powerpc/dts-bindings/fsl/pmc.txt Normal file
View File

@ -0,0 +1,63 @@
* Power Management Controller
Properties:
- compatible: "fsl,<chip>-pmc".
"fsl,mpc8349-pmc" should be listed for any chip whose PMC is
compatible. "fsl,mpc8313-pmc" should also be listed for any chip
whose PMC is compatible, and implies deep-sleep capability.
"fsl,mpc8548-pmc" should be listed for any chip whose PMC is
compatible. "fsl,mpc8536-pmc" should also be listed for any chip
whose PMC is compatible, and implies deep-sleep capability.
"fsl,mpc8641d-pmc" should be listed for any chip whose PMC is
compatible; all statements below that apply to "fsl,mpc8548-pmc" also
apply to "fsl,mpc8641d-pmc".
Compatibility does not include bit assigments in SCCR/PMCDR/DEVDISR; these
bit assigments are indicated via the sleep specifier in each device's
sleep property.
- reg: For devices compatible with "fsl,mpc8349-pmc", the first resource
is the PMC block, and the second resource is the Clock Configuration
block.
For devices compatible with "fsl,mpc8548-pmc", the first resource
is a 32-byte block beginning with DEVDISR.
- interrupts: For "fsl,mpc8349-pmc"-compatible devices, the first
resource is the PMC block interrupt.
- fsl,mpc8313-wakeup-timer: For "fsl,mpc8313-pmc"-compatible devices,
this is a phandle to an "fsl,gtm" node on which timer 4 can be used as
a wakeup source from deep sleep.
Sleep specifiers:
fsl,mpc8349-pmc: Sleep specifiers consist of one cell. For each bit
that is set in the cell, the corresponding bit in SCCR will be saved
and cleared on suspend, and restored on resume. This sleep controller
supports disabling and resuming devices at any time.
fsl,mpc8536-pmc: Sleep specifiers consist of three cells, the third of
which will be ORed into PMCDR upon suspend, and cleared from PMCDR
upon resume. The first two cells are as described for fsl,mpc8578-pmc.
This sleep controller only supports disabling devices during system
sleep, or permanently.
fsl,mpc8548-pmc: Sleep specifiers consist of one or two cells, the
first of which will be ORed into DEVDISR (and the second into
DEVDISR2, if present -- this cell should be zero or absent if the
hardware does not have DEVDISR2) upon a request for permanent device
disabling. This sleep controller does not support configuring devices
to disable during system sleep (unless supported by another compatible
match), or dynamically.
Example:
power@b00 {
compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
reg = <0xb00 0x100 0xa00 0x100>;
interrupts = <80 8>;
};

31
Documentation/powerpc/dts-bindings/fsl/tsec.txt
View File

@ -24,46 +24,39 @@ Example:
* Gianfar-compatible ethernet nodes
Required properties:
Properties:
- device_type : Should be "network"
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- mac-address : List of bytes representing the ethernet address of
- local-mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
the information in section 2) depending on the type of interrupt
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- interrupts : For FEC devices, the first interrupt is the device's
interrupt. For TSEC and eTSEC devices, the first interrupt is
transmit, the second is receive, and the third is error.
- phy-handle : The phandle for the PHY connected to this ethernet
controller.
- fixed-link : <a b c d e> where a is emulated phy id - choose any,
but unique to the all specified fixed-links, b is duplex - 0 half,
1 full, c is link speed - d#10/d#100/d#1000, d is pause - 0 no
pause, 1 pause, e is asym_pause - 0 no asym_pause, 1 asym_pause.
Recommended properties:
- phy-connection-type : a string naming the controller/PHY interface type,
i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "sgmii",
"tbi", or "rtbi". This property is only really needed if the connection
is of type "rgmii-id", as all other connection types are detected by
hardware.
- fsl,magic-packet : If present, indicates that the hardware supports
waking up via magic packet.
Example:
ethernet@24000 {
#size-cells = <0>;
device_type = "network";
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
reg = <0x24000 0x1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>
};

28
Documentation/powerpc/dts-bindings/fsl/upm-nand.txt Normal file
View File

@ -0,0 +1,28 @@
Freescale Localbus UPM programmed to work with NAND flash
Required properties:
- compatible : "fsl,upm-nand".
- reg : should specify localbus chip select and size used for the chip.
- fsl,upm-addr-offset : UPM pattern offset for the address latch.
- fsl,upm-cmd-offset : UPM pattern offset for the command latch.
- gpios : may specify optional GPIO connected to the Ready-Not-Busy pin.
Example:
upm@1,0 {
compatible = "fsl,upm-nand";
reg = <1 0 1>;
fsl,upm-addr-offset = <16>;
fsl,upm-cmd-offset = <8>;
gpios = <&qe_pio_e 18 0>;
flash {
#address-cells = <1>;
#size-cells = <1>;
compatible = "...";
partition@0 {
...
};
};
};

15
Documentation/powerpc/dts-bindings/gpio/led.txt Normal file
View File

@ -0,0 +1,15 @@
LED connected to GPIO
Required properties:
- compatible : should be "gpio-led".
- label : (optional) the label for this LED. If omitted, the label is
taken from the node name (excluding the unit address).
- gpios : should specify LED GPIO.
Example:
led@0 {
compatible = "gpio-led";
label = "hdd";
gpios = <&mcu_pio 0 1>;
};

2
Documentation/powerpc/qe_firmware.txt
View File

@ -217,7 +217,7 @@ Although it is not recommended, you can specify '0' in the soc.model
field to skip matching SOCs altogether.
The 'model' field is a 16-bit number that matches the actual SOC. The
'major' and 'minor' fields are the major and minor revision numbrs,
'major' and 'minor' fields are the major and minor revision numbers,
respectively, of the SOC.
For example, to match the 8323, revision 1.0:

2
Documentation/s390/driver-model.txt
View File

@ -25,7 +25,7 @@ device 4711 via subchannel 1 in subchannel set 0, and subchannel 2 is a non-I/O
subchannel. Device 1234 is accessed via subchannel 0 in subchannel set 1.
The subchannel named 'defunct' does not represent any real subchannel on the
system; it is a pseudo subchannel where disconnnected ccw devices are moved to
system; it is a pseudo subchannel where disconnected ccw devices are moved to
if they are displaced by another ccw device becoming operational on their
former subchannel. The ccw devices will be moved again to a proper subchannel
if they become operational again on that subchannel.

6
Documentation/scsi/ibmmca.txt
View File

@ -524,7 +524,7 @@
- Michael Lang
June 25 1997: (v1.8b)
1) Some cosmetical changes for the handling of SCSI-device-types.
1) Some cosmetic changes for the handling of SCSI-device-types.
Now, also CD-Burners / WORMs and SCSI-scanners should work. For
MO-drives I have no experience, therefore not yet supported.
In logical_devices I changed from different type-variables to one
@ -914,7 +914,7 @@
in version 4.0. This was never really necessary, as all troubles were
based on non-command related reasons up to now, so bypassing commands
did not help to avoid any bugs. It is kept in 3.2X for debugging reasons.
5) Dynamical reassignment of ldns was again verified and analyzed to be
5) Dynamic reassignment of ldns was again verified and analyzed to be
completely inoperational. This is corrected and should work now.
6) All commands that get sent to the SCSI adapter were verified and
completed in such a way, that they are now completely conform to the
@ -1386,7 +1386,7 @@
concerning the Linux-kernel in special, this SCSI-driver comes without any
warranty. Its functionality is tested as good as possible on certain
machines and combinations of computer hardware, which does not exclude,
that dataloss or severe damage of hardware is possible while using this
that data loss or severe damage of hardware is possible while using this
part of software on some arbitrary computer hardware or in combination
with other software packages. It is highly recommended to make backup
copies of your data before using this software. Furthermore, personal

2
Documentation/scsi/lpfc.txt
View File

@ -36,7 +36,7 @@ Cable pull and temporary device Loss:
being removed, a switch rebooting, or a device reboot), the driver could
hide the disappearance of the device from the midlayer. I/O's issued to
the LLDD would simply be queued for a short duration, allowing the device
to reappear or link come back alive, with no inadvertant side effects
to reappear or link come back alive, with no inadvertent side effects
to the system. If the driver did not hide these conditions, i/o would be
errored by the driver, the mid-layer would exhaust its retries, and the
device would be taken offline. Manual intervention would be required to

6
Documentation/scsi/scsi_fc_transport.txt
View File

@ -65,7 +65,7 @@ Overview:
discussion will concentrate on NPIV.
Note: World Wide Name assignment (and uniqueness guarantees) are left
up to an administrative entity controling the vport. For example,
up to an administrative entity controlling the vport. For example,
if vports are to be associated with virtual machines, a XEN mgmt
utility would be responsible for creating wwpn/wwnn's for the vport,
using it's own naming authority and OUI. (Note: it already does this
@ -91,7 +91,7 @@ Device Trees and Vport Objects:
Here's what to expect in the device tree :
The typical Physical Port's Scsi_Host:
/sys/devices/.../host17/
and it has the typical decendent tree:
and it has the typical descendant tree:
/sys/devices/.../host17/rport-17:0-0/target17:0:0/17:0:0:0:
and then the vport is created on the Physical Port:
/sys/devices/.../host17/vport-17:0-0
@ -192,7 +192,7 @@ Vport States:
independent of the adapter's link state.
- Instantiation of the vport on the FC link via ELS traffic, etc.
This is equivalent to a "link up" and successfull link initialization.
Futher information can be found in the interfaces section below for
Further information can be found in the interfaces section below for
Vport Creation.
Once a vport has been instantiated with the kernel/LLDD, a vport state

2
Documentation/sh/clk.txt
View File

@ -12,7 +12,7 @@ means no changes to adjanced clock
Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method,
if it is present in ops structure. The method should set the clock rate and adjust
all needed clocks according to the passed algo_id.
Exact values for algo_id are machine-dependend. For the sh7722, the following
Exact values for algo_id are machine-dependent. For the sh7722, the following
values are defined:
NO_CHANGE = 0,

1
Documentation/sound/alsa/ALSA-Configuration.txt
View File

@ -1024,6 +1024,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
intel-mac-v3 Intel Mac Type 3
intel-mac-v4 Intel Mac Type 4
intel-mac-v5 Intel Mac Type 5
intel-mac-auto Intel Mac (detect type according to subsystem id)
macmini Intel Mac Mini (equivalent with type 3)
macbook Intel Mac Book (eq. type 5)
macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)

10
Documentation/sound/alsa/Audiophile-Usb.txt
View File

@ -236,15 +236,15 @@ The parameter can be given:
alias snd-card-1 snd-usb-audio
options snd-usb-audio index=1 device_setup=0x09
CAUTION when initializaing the device
CAUTION when initializing the device
-------------------------------------
* Correct initialization on the device requires that device_setup is given to
the module BEFORE the device is turned on. So, if you use the "manual probing"
method described above, take care to power-on the device AFTER this initialization.
* Failing to respect this will lead in a misconfiguration of the device. In this case
turn off the device, unproble the snd-usb-audio module, then probe it again with
* Failing to respect this will lead to a misconfiguration of the device. In this case
turn off the device, unprobe the snd-usb-audio module, then probe it again with
correct device_setup parameter and then (and only then) turn on the device again.
* If you've correctly initialized the device in a valid mode and then want to switch
@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device:
Jack supports big endian devices only in recent versions (thanks to
Andreas Steinmetz for his first big-endian patch). I can't remember
extacly when this support was released into jackd, let's just say that
exactly when this support was released into jackd, let's just say that
with jackd version 0.103.0 it's almost ok (just a small bug is affecting
16bits Big-Endian devices, but since you've read carefully the above
16bits Big-Endian devices, but since you've read carefully the above
paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices
are now Little Endians ;-) ).

2
Documentation/sound/alsa/DocBook/alsa-driver-api.tmpl
View File

@ -42,7 +42,7 @@
<sect1><title>Device Components</title>
!Esound/core/device.c
</sect1>
<sect1><title>KMOD and Device File Entries</title>
<sect1><title>Module requests and Device File Entries</title>
!Esound/core/sound.c
</sect1>
<sect1><title>Memory Management Helpers</title>

2
Documentation/sound/alsa/hda_codec.txt
View File

@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs
to power up or may power down. The controller should check the all
belonging codecs on the bus whether they are actually powered off
(check codec->power_on), and optionally the driver may power down the
contoller side, too.
controller side, too.
The bus instance is created via snd_hda_bus_new(). You need to pass
the card instance, the template, and the pointer to store the

2
Documentation/sound/alsa/soc/dapm.txt
View File

@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:-
(Widgets are defined in include/sound/soc-dapm.h)
Widgets are usually added in the codec driver and the machine driver. There are
convience macros defined in soc-dapm.h that can be used to quickly build a
convenience macros defined in soc-dapm.h that can be used to quickly build a
list of widgets of the codecs and machines DAPM widgets.
Most widgets have a name, register, shift and invert. Some widgets have extra

8
Documentation/sparse.txt
View File

@ -73,10 +73,10 @@ recompiled, or use "make C=2" to run sparse on the files whether they need to
be recompiled or not. The latter is a fast way to check the whole tree if you
have already built it.
The optional make variable CHECKFLAGS can be used to pass arguments to sparse.
The build system passes -Wbitwise to sparse automatically. To perform
endianness checks, you may define __CHECK_ENDIAN__:
The optional make variable CF can be used to pass arguments to sparse. The
build system passes -Wbitwise to sparse automatically. To perform endianness
checks, you may define __CHECK_ENDIAN__:
make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__"
make C=2 CF="-D__CHECK_ENDIAN__"
These checks are disabled by default as they generate a host of warnings.

8
Documentation/specialix.txt
View File

@ -270,8 +270,8 @@ The pinout of the connectors on the IO8+ is:
Hardware handshaking issues.
============================
The driver can be compiled in two different ways. The default
("Specialix DTR/RTS pin is RTS" is off) the pin behaves as DTR when
The driver can be told to operate in two different ways. The default
behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when
hardware handshaking is off. It behaves as the RTS hardware
handshaking signal when hardware handshaking is selected.
@ -280,7 +280,7 @@ cable will either be compatible with hardware handshaking or with
software handshaking. So switching on the fly is not really an
option.
I actually prefer to use the "Specialix DTR/RTS pin is RTS" option.
I actually prefer to use the "specialix.sx_rtscts=1" option.
This makes the DTR/RTS pin always an RTS pin, and ioctls to
change DTR are always ignored. I have a cable that is configured
for this.
@ -379,7 +379,5 @@ it doesn't fit in your computer, bring back the card.
You have to WRITE to the address register to even
read-probe a CD186x register. Disable autodetection?
-- Specialix: any suggestions?
- Arbitrary baud rates are not implemented yet.
If you need this, bug me about it.

2
Documentation/sysctl/vm.txt
View File

@ -116,7 +116,7 @@ of kilobytes free. The VM uses this number to compute a pages_min
value for each lowmem zone in the system. Each lowmem zone gets
a number of reserved free pages based proportionally on its size.
Some minimal ammount of memory is needed to satisfy PF_MEMALLOC
Some minimal amount of memory is needed to satisfy PF_MEMALLOC
allocations; if you set this to lower than 1024KB, your system will
become subtly broken, and prone to deadlock under high loads.

5
Documentation/sysfs-rules.txt
View File

@ -3,9 +3,8 @@ Rules on how to access information in the Linux kernel sysfs
The kernel-exported sysfs exports internal kernel implementation details
and depends on internal kernel structures and layout. It is agreed upon
by the kernel developers that the Linux kernel does not provide a stable
internal API. As sysfs is a direct export of kernel internal
structures, the sysfs interface cannot provide a stable interface either;
it may always change along with internal kernel changes.
internal API. Therefore, there are aspects of the sysfs interface that
may not be stable across kernel releases.
To minimize the risk of breaking users of sysfs, which are in most cases
low-level userspace applications, with a new kernel release, the users

13
Documentation/telephony/ixj.txt
View File

@ -305,21 +305,14 @@ driver, like this:
which will result in the needed drivers getting loaded automatically.
g. if you are planning on using kerneld to automatically load the
module for you, then you need to edit /etc/conf.modules and add the
g. if you are planning on having the kernel automatically request
the module for you, then you need to edit /etc/conf.modules and add the
following lines:
options ixj dspio=0x340 xio=0x330 ixjdebug=0
If you do this, then when you execute an application that uses the
module kerneld will load the module for you. Note that to do this,
you need to have your kernel set to support kerneld. You can check
for this by looking at /usr/src/linux/.config and you should see this:
# Loadable module support
#
<snip>
CONFIG_KMOD=y
module the kernel will request that it is loaded.
h. if you want non-root users to be able to read and write to the
ixj devices (this is a good idea!) you should do the following:

2
Documentation/timers/highres.txt
View File

@ -125,7 +125,7 @@ increase of flexibility and the avoidance of duplicated code across
architectures justifies the slight increase of the binary size.
The conversion of an architecture has no functional impact, but allows to
utilize the high resolution and dynamic tick functionalites without any change
utilize the high resolution and dynamic tick functionalities without any change
to the clock event device and timer interrupt code. After the conversion the
enabling of high resolution timers and dynamic ticks is simply provided by
adding the kernel/time/Kconfig file to the architecture specific Kconfig and

36
Documentation/unaligned-memory-access.txt
View File

@ -218,9 +218,35 @@ If use of such macros is not convenient, another option is to use memcpy(),
where the source or destination (or both) are of type u8* or unsigned char*.
Due to the byte-wise nature of this operation, unaligned accesses are avoided.
--
Author: Daniel Drake <dsd@gentoo.org>
With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
Johannes Berg, Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock,
Uli Kunitz, Vadim Lobanov
Alignment vs. Networking
========================
On architectures that require aligned loads, networking requires that the IP
header is aligned on a four-byte boundary to optimise the IP stack. For
regular ethernet hardware, the constant NET_IP_ALIGN is used. On most
architectures this constant has the value 2 because the normal ethernet
header is 14 bytes long, so in order to get proper alignment one needs to
DMA to an address which can be expressed as 4*n + 2. One notable exception
here is powerpc which defines NET_IP_ALIGN to 0 because DMA to unaligned
addresses can be very expensive and dwarf the cost of unaligned loads.
For some ethernet hardware that cannot DMA to unaligned addresses like
4*n+2 or non-ethernet hardware, this can be a problem, and it is then
required to copy the incoming frame into an aligned buffer. Because this is
unnecessary on architectures that can do unaligned accesses, the code can be
made dependent on CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS like so:
#ifdef CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
skb = original skb
#else
skb = copy skb
#endif
--
Authors: Daniel Drake <dsd@gentoo.org>,
Johannes Berg <johannes@sipsolutions.net>
With help from: Alan Cox, Avuton Olrich, Heikki Orsila, Jan Engelhardt,
Kyle McMartin, Kyle Moffett, Randy Dunlap, Robert Hancock, Uli Kunitz,
Vadim Lobanov

2
Documentation/usb/authorization.txt
View File

@ -8,7 +8,7 @@ not) in a system. This feature will allow you to implement a lock-down
of USB devices, fully controlled by user space.
As of now, when a USB device is connected it is configured and
it's interfaces inmediately made available to the users. With this
its interfaces are immediately made available to the users. With this
modification, only if root authorizes the device to be configured will
then it be possible to use it.

35
Documentation/usb/gadget_serial.txt
View File

@ -1,6 +1,7 @@
Linux Gadget Serial Driver v2.0
11/20/2004
(updated 8-May-2008 for v2.3)
License and Disclaimer
@ -31,7 +32,7 @@ Prerequisites
-------------
Versions of the gadget serial driver are available for the
2.4 Linux kernels, but this document assumes you are using
version 2.0 or later of the gadget serial driver in a 2.6
version 2.3 or later of the gadget serial driver in a 2.6
Linux kernel.
This document assumes that you are familiar with Linux and
@ -40,6 +41,12 @@ standard utilities, use minicom and HyperTerminal, and work with
USB and serial devices. It also assumes you configure the Linux
gadget and usb drivers as modules.
With version 2.3 of the driver, major and minor device nodes are
no longer statically defined. Your Linux based system should mount
sysfs in /sys, and use "mdev" (in Busybox) or "udev" to make the
/dev nodes matching the sysfs /sys/class/tty files.
Overview
--------
@ -104,15 +111,8 @@ driver. All this are listed under "USB Gadget Support" when
configuring the kernel. Then rebuild and install the kernel or
modules.
The gadget serial driver uses major number 127, for now. So you
will need to create a device node for it, like this:
mknod /dev/ttygserial c 127 0
You only need to do this once.
Then you must load the gadget serial driver. To load it as an
ACM device, do this:
ACM device (recommended for interoperability), do this:
modprobe g_serial use_acm=1
@ -125,6 +125,23 @@ controller driver. This must be done each time you reboot the gadget
side Linux system. You can add this to the start up scripts, if
desired.
Your system should use mdev (from busybox) or udev to make the
device nodes. After this gadget driver has been set up you should
then see a /dev/ttyGS0 node:
# ls -l /dev/ttyGS0 | cat
crw-rw---- 1 root root 253, 0 May 8 14:10 /dev/ttyGS0
#
Note that the major number (253, above) is system-specific. If
you need to create /dev nodes by hand, the right numbers to use
will be in the /sys/class/tty/ttyGS0/dev file.
When you link this gadget driver early, perhaps even statically,
you may want to set up an /etc/inittab entry to run "getty" on it.
The /dev/ttyGS0 line should work like most any other serial port.
If gadget serial is loaded as an ACM device you will want to use
either the Windows or Linux ACM driver on the host side. If gadget
serial is loaded as a bulk in/out device, you will want to use the

7
Documentation/usb/persist.txt
View File

@ -81,8 +81,11 @@ re-enumeration shows that the device now attached to that port has the
same descriptors as before, including the Vendor and Product IDs, then
the kernel continues to use the same device structure. In effect, the
kernel treats the device as though it had merely been reset instead of
unplugged. The same thing happens if the host controller is in the
expected state but a USB device was unplugged and then replugged.
unplugged.
The same thing happens if the host controller is in the expected state
but a USB device was unplugged and then replugged, or if a USB device
fails to carry out a normal resume.
If no device is now attached to the port, or if the descriptors are
different from what the kernel remembers, then the treatment is what

165
Documentation/usb/uhci.txt
View File

@ -1,165 +0,0 @@
Specification and Internals for the New UHCI Driver (Whitepaper...)
brought to you by
Georg Acher, acher@in.tum.de (executive slave) (base guitar)
Deti Fliegl, deti@fliegl.de (executive slave) (lead voice)
Thomas Sailer, sailer@ife.ee.ethz.ch (chief consultant) (cheer leader)
$Id: README.uhci,v 1.1 1999/12/14 14:03:02 fliegl Exp $
This document and the new uhci sources can be found on
http://hotswap.in.tum.de/usb
1. General issues
1.1 Why a new UHCI driver, we already have one?!?
Correct, but its internal structure got more and more mixed up by the (still
ongoing) efforts to get isochronous transfers (ISO) to work.
Since there is an increasing need for reliable ISO-transfers (especially
for USB-audio needed by TS and for a DAB-USB-Receiver build by GA and DF),
this state was a bit unsatisfying in our opinion, so we've decided (based
on knowledge and experiences with the old UHCI driver) to start
from scratch with a new approach, much simpler but at the same time more
powerful.
It is inspired by the way Win98/Win2000 handles USB requests via URBs,
but it's definitely 100% free of MS-code and doesn't crash while
unplugging an used ISO-device like Win98 ;-)
Some code for HW setup and root hub management was taken from the
original UHCI driver, but heavily modified to fit into the new code.
The invention of the basic concept, and major coding were completed in two
days (and nights) on the 16th and 17th of October 1999, now known as the
great USB-October-Revolution started by GA, DF, and TS ;-)
Since the concept is in no way UHCI dependent, we hope that it will also be
transferred to the OHCI-driver, so both drivers share a common API.
1.2. Advantages and disadvantages
+ All USB transfer types work now!
+ Asynchronous operation
+ Simple, but powerful interface (only two calls for start and cancel)
+ Easy migration to the new API, simplified by a compatibility API
+ Simple usage of ISO transfers
+ Automatic linking of requests
+ ISO transfers allow variable length for each frame and striping
+ No CPU dependent and non-portable atomic memory access, no asm()-inlines
+ Tested on x86 and Alpha
- Rewriting for ISO transfers needed
1.3. Is there some compatibility to the old API?
Yes, but only for control, bulk and interrupt transfers. We've implemented
some wrapper calls for these transfer types. The usbcore works fine with
these wrappers. For ISO there's no compatibility, because the old ISO-API
and its semantics were unnecessary complicated in our opinion.
1.4. What's really working?
As said above, CTRL and BULK already work fine even with the wrappers,
so legacy code wouldn't notice the change.
Regarding to Thomas, ISO transfers now run stable with USB audio.
INT transfers (e.g. mouse driver) work fine, too.
1.5. Are there any bugs?
No ;-)
Hm...
Well, of course this implementation needs extensive testing on all available
hardware, but we believe that any fixes shouldn't harm the overall concept.
1.6. What should be done next?
A large part of the request handling seems to be identical for UHCI and
OHCI, so it would be a good idea to extract the common parts and have only
the HW specific stuff in uhci.c. Furthermore, all other USB device drivers
should need URBification, if they use isochronous or interrupt transfers.
One thing missing in the current implementation (and the old UHCI driver)
is fair queueing for BULK transfers. Since this would need (in principle)
the alteration of already constructed TD chains (to switch from depth to
breadth execution), another way has to be found. Maybe some simple
heuristics work with the same effect.
---------------------------------------------------------------------------
2. Internal structure and mechanisms
To get quickly familiar with the internal structures, here's a short
description how the new UHCI driver works. However, the ultimate source of
truth is only uhci.c!
2.1. Descriptor structure (QHs and TDs)
During initialization, the following skeleton is allocated in init_skel:
framespecific | common chain
framelist[]
[ 0 ]-----> TD --> TD -------\
[ 1 ]-----> TD --> TD --------> TD ----> QH -------> QH -------> QH ---> NULL
... TD --> TD -------/
[1023]-----> TD --> TD ------/
^^ ^^ ^^ ^^ ^^ ^^
1024 TDs for 7 TDs for 1 TD for Start of Start of End Chain
ISO INT (2-128ms) 1ms-INT CTRL Chain BULK Chain
For each CTRL or BULK transfer a new QH is allocated and the containing data
transfers are appended as (vertical) TDs. After building the whole QH with its
dangling TDs, the QH is inserted before the BULK Chain QH (for CTRL) or
before the End Chain QH (for BULK). Since only the QH->next pointers are
affected, no atomic memory operation is required. The three QHs in the
common chain are never equipped with TDs!
For ISO or INT, the TD for each frame is simply inserted into the appropriate
ISO/INT-TD-chain for the desired frame. The 7 skeleton INT-TDs are scattered
among the 1024 frames similar to the old UHCI driver.
For CTRL/BULK/ISO, the last TD in the transfer has the IOC-bit set. For INT,
every TD (there is only one...) has the IOC-bit set.
Besides the data for the UHCI controller (2 or 4 32bit words), the descriptors
are double-linked through the .vertical and .horizontal elements in the
SW data of the descriptor (using the double-linked list structures and
operations), but SW-linking occurs only in closed domains, i.e. for each of
the 1024 ISO-chains and the 8 INT-chains there is a closed cycle. This
simplifies all insertions and unlinking operations and avoids costly
bus_to_virt()-calls.
2.2. URB structure and linking to QH/TDs
During assembly of the QH and TDs of the requested action, these descriptors
are stored in urb->urb_list, so the allocated QH/TD descriptors are bound to
this URB.
If the assembly was successful and the descriptors were added to the HW chain,
the corresponding URB is inserted into a global URB list for this controller.
This list stores all pending URBs.
2.3. Interrupt processing
Since UHCI provides no means to directly detect completed transactions, the
following is done in each UHCI interrupt (uhci_interrupt()):
For each URB in the pending queue (process_urb()), the ACTIVE-flag of the
associated TDs are processed (depending on the transfer type
process_{transfer|interrupt|iso}()). If the TDs are not active anymore,
they indicate the completion of the transaction and the status is calculated.
Inactive QH/TDs are removed from the HW chain (since the host controller
already removed the TDs from the QH, no atomic access is needed) and
eventually the URB is marked as completed (OK or errors) and removed from the
pending queue. Then the next linked URB is submitted. After (or immediately
before) that, the completion handler is called.
2.4. Unlinking URBs
First, all QH/TDs stored in the URB are unlinked from the HW chain.
To ensure that the host controller really left a vertical TD chain, we
wait for one frame. After that, the TDs are physically destroyed.
2.5. URB linking and the consequences
Since URBs can be linked and the corresponding submit_urb is called in
the UHCI-interrupt, all work associated with URB/QH/TD assembly has to be
interrupt save. This forces kmalloc to use GFP_ATOMIC in the interrupt.

1
Documentation/video4linux/CARDLIST.au0828
View File

@ -2,3 +2,4 @@
1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008]
2 -> Hauppauge HVR850 (au0828) [2040:7240]
3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620]
4 -> Hauppauge HVR950Q rev xxF8 (au0828) [2040:7201,2040:7211,2040:7281]

45
Documentation/video4linux/CARDLIST.em28xx
View File

@ -1,11 +1,11 @@
0 -> Unknown EM2800 video grabber (em2800) [eb1a:2800]
1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2750,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
1 -> Unknown EM2750/28xx video grabber (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
2 -> Terratec Cinergy 250 USB (em2820/em2840) [0ccd:0036]
3 -> Pinnacle PCTV USB 2 (em2820/em2840) [2304:0208]
4 -> Hauppauge WinTV USB 2 (em2820/em2840) [2040:4200,2040:4201]
5 -> MSI VOX USB 2.0 (em2820/em2840)
6 -> Terratec Cinergy 200 USB (em2800)
7 -> Leadtek Winfast USB II (em2800)
7 -> Leadtek Winfast USB II (em2800) [0413:6023]
8 -> Kworld USB2800 (em2800)
9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a]
10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500]
@ -14,7 +14,46 @@
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f]
16 -> Hauppauge WinTV HVR 950 (em2883) [2040:6513,2040:6517,2040:651b,2040:651f]
17 -> Pinnacle PCTV HD Pro Stick (em2880) [2304:0227]
18 -> Hauppauge WinTV HVR 900 (R2) (em2880) [2040:6502]
19 -> PointNix Intra-Oral Camera (em2860)
20 -> AMD ATI TV Wonder HD 600 (em2880) [0438:b002]
21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800) [eb1a:2801]
22 -> Unknown EM2750/EM2751 webcam grabber (em2750) [eb1a:2750,eb1a:2751]
23 -> Huaqi DLCW-130 (em2750)
24 -> D-Link DUB-T210 TV Tuner (em2820/em2840) [2001:f112]
25 -> Gadmei UTV310 (em2820/em2840)
26 -> Hercules Smart TV USB 2.0 (em2820/em2840)
27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) (em2820/em2840)
28 -> Leadtek Winfast USB II Deluxe (em2820/em2840)
29 -> Pinnacle Dazzle DVC 100 (em2820/em2840)
30 -> Videology 20K14XUSB USB2.0 (em2820/em2840)
31 -> Usbgear VD204v9 (em2821)
32 -> Supercomp USB 2.0 TV (em2821)
33 -> SIIG AVTuner-PVR/Prolink PlayTV USB 2.0 (em2821)
34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f]
35 -> Typhoon DVD Maker (em2860)
36 -> NetGMBH Cam (em2860)
37 -> Gadmei UTV330 (em2860)
38 -> Yakumo MovieMixer (em2861)
39 -> KWorld PVRTV 300U (em2861) [eb1a:e300]
40 -> Plextor ConvertX PX-TV100U (em2861) [093b:a005]
41 -> Kworld 350 U DVB-T (em2870) [eb1a:e350]
42 -> Kworld 355 U DVB-T (em2870) [eb1a:e355,eb1a:e357]
43 -> Terratec Cinergy T XS (em2870) [0ccd:0043]
44 -> Terratec Cinergy T XS (MT2060) (em2870)
45 -> Pinnacle PCTV DVB-T (em2870)
46 -> Compro, VideoMate U3 (em2870) [185b:2870]
47 -> KWorld DVB-T 305U (em2880) [eb1a:e305]
48 -> KWorld DVB-T 310U (em2880)
49 -> MSI DigiVox A/D (em2880) [eb1a:e310]
50 -> MSI DigiVox A/D II (em2880) [eb1a:e320]
51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c]
52 -> DNT DA2 Hybrid (em2881)
53 -> Pinnacle Hybrid Pro (em2881)
54 -> Kworld VS-DVB-T 323UR (em2882) [eb1a:e323]
55 -> Terratec Hybrid XS (em2882) (em2882) [0ccd:005e]
56 -> Pinnacle Hybrid Pro (2) (em2882) [2304:0226]
57 -> Kworld PlusTV HD Hybrid 330 (em2883) [eb1a:a316]
58 -> Compro VideoMate ForYou/Stereo (em2820/em2840) [185b:2041]

2
Documentation/video4linux/gspca.txt
View File

@ -1,4 +1,4 @@
List of the webcams know by gspca.
List of the webcams known by gspca.
The modules are:
gspca_main main driver

2
Documentation/video4linux/sn9c102.txt
View File

@ -157,7 +157,7 @@ Loading can be done as shown below:
[root@localhost home]# modprobe sn9c102
Note that the module is called "sn9c102" for historic reasons, althought it
Note that the module is called "sn9c102" for historic reasons, although it
does not just support the SN9C102.
At this point all the devices supported by the driver and connected to the USB

3
Documentation/video4linux/w9968cf.txt
View File

@ -193,9 +193,6 @@ Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
loads that module automatically. This action is performed as
once soon as the 'w9968cf' module is loaded into memory.
Default: 1
Note: The kernel must be compiled with the CONFIG_KMOD option
enabled for the 'ovcamchip' module to be loaded and for
this parameter to be present.
-------------------------------------------------------------------------------
Name: simcams
Type: int

25
Documentation/vm/hugetlbpage.txt
View File

@ -77,7 +77,7 @@ memory that is preset in system at this time. System administrators may want
to put this command in one of the local rc init files. This will enable the
kernel to request huge pages early in the boot process (when the possibility
of getting physical contiguous pages is still very high). In either
case, adminstrators will want to verify the number of hugepages actually
case, administrators will want to verify the number of hugepages actually
allocated by checking the sysctl or meminfo.
/proc/sys/vm/nr_overcommit_hugepages indicates how large the pool of
@ -95,6 +95,29 @@ this condition holds, however, no more surplus huge pages will be
allowed on the system until one of the two sysctls are increased
sufficiently, or the surplus huge pages go out of use and are freed.
With support for multiple hugepage pools at run-time available, much of
the hugepage userspace interface has been duplicated in sysfs. The above
information applies to the default hugepage size (which will be
controlled by the proc interfaces for backwards compatibility). The root
hugepage control directory is
/sys/kernel/mm/hugepages
For each hugepage size supported by the running kernel, a subdirectory
will exist, of the form
hugepages-${size}kB
Inside each of these directories, the same set of files will exist:
nr_hugepages
nr_overcommit_hugepages
free_hugepages
resv_hugepages
surplus_hugepages
which function as described above for the default hugepage-sized case.
If the user applications are going to request hugepages using mmap system
call, then it is required that system administrator mount a file system of
type hugetlbfs:

4
Documentation/vm/numa_memory_policy.txt
View File

@ -58,7 +58,7 @@ most general to most specific:
the policy at the time they were allocated.
VMA Policy: A "VMA" or "Virtual Memory Area" refers to a range of a task's
virtual adddress space. A task may define a specific policy for a range
virtual address space. A task may define a specific policy for a range
of its virtual address space. See the MEMORY POLICIES APIS section,
below, for an overview of the mbind() system call used to set a VMA
policy.
@ -353,7 +353,7 @@ follows:
Because of this extra reference counting, and because we must lookup
shared policies in a tree structure under spinlock, shared policies are
more expensive to use in the page allocation path. This is expecially
more expensive to use in the page allocation path. This is especially
true for shared policies on shared memory regions shared by tasks running
on different NUMA nodes. This extra overhead can be avoided by always
falling back to task or system default policy for shared memory regions,

2
Documentation/volatile-considered-harmful.txt
View File

@ -114,6 +114,6 @@ CREDITS
Original impetus and research by Randy Dunlap
Written by Jonathan Corbet
Improvements via coments from Satyam Sharma, Johannes Stezenbach, Jesper
Improvements via comments from Satyam Sharma, Johannes Stezenbach, Jesper
Juhl, Heikki Orsila, H. Peter Anvin, Philipp Hahn, and Stefan
Richter.

3
Kbuild
View File

@ -43,7 +43,7 @@ $(obj)/$(bounds-file): kernel/bounds.s Kbuild
# 2) Generate asm-offsets.h
#
offsets-file := include/asm-$(SRCARCH)/asm-offsets.h
offsets-file := include/asm/asm-offsets.h
always += $(offsets-file)
targets += $(offsets-file)
@ -81,7 +81,6 @@ arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s Kbuild
$(Q)mkdir -p $(dir $@)
$(call cmd,offsets)
#####

Some files were not shown because too many files have changed in this diff Show More