Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
This commit is contained in:
Paul Mundt
commit
cf9fe114e3
|
|
@ -0,0 +1,18 @@
|
|||
What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
|
||||
Date: August 2008
|
||||
KernelVersion: 2.6.27
|
||||
Contact: mark.langsdorf@amd.com
|
||||
Description: These files exist in every cpu's cache index directories.
|
||||
There are currently 2 cache_disable_# files in each
|
||||
directory. Reading from these files on a supported
|
||||
processor will return that cache disable index value
|
||||
for that processor and node. Writing to one of these
|
||||
files will cause the specificed cache index to be disabled.
|
||||
|
||||
Currently, only AMD Family 10h Processors support cache index
|
||||
disable, and only for their L3 caches. See the BIOS and
|
||||
Kernel Developer's Guide at
|
||||
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
|
||||
for formatting information and other details on the
|
||||
cache index disable.
|
||||
Users: joachim.deguara@amd.com
|
||||
|
|
@ -704,12 +704,24 @@ this directory the following files can currently be found:
|
|||
The current number of free dma_debug_entries
|
||||
in the allocator.
|
||||
|
||||
dma-api/driver-filter
|
||||
You can write a name of a driver into this file
|
||||
to limit the debug output to requests from that
|
||||
particular driver. Write an empty string to
|
||||
that file to disable the filter and see
|
||||
all errors again.
|
||||
|
||||
If you have this code compiled into your kernel it will be enabled by default.
|
||||
If you want to boot without the bookkeeping anyway you can provide
|
||||
'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
|
||||
Notice that you can not enable it again at runtime. You have to reboot to do
|
||||
so.
|
||||
|
||||
If you want to see debug messages only for a special device driver you can
|
||||
specify the dma_debug_driver=<drivername> parameter. This will enable the
|
||||
driver filter at boot time. The debug code will only print errors for that
|
||||
driver afterwards. This filter can be disabled or changed later using debugfs.
|
||||
|
||||
When the code disables itself at runtime this is most likely because it ran
|
||||
out of dma_debug_entries. These entries are preallocated at boot. The number
|
||||
of preallocated entries is defined per architecture. If it is too low for you
|
||||
|
|
|
|||
|
|
@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
|
|||
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
|
||||
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
|
||||
mac80211.xml debugobjects.xml sh.xml regulator.xml \
|
||||
alsa-driver-api.xml writing-an-alsa-driver.xml
|
||||
alsa-driver-api.xml writing-an-alsa-driver.xml \
|
||||
tracepoint.xml
|
||||
|
||||
###
|
||||
# The build process is as follows (targets):
|
||||
|
|
|
|||
|
|
@ -0,0 +1,89 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
|
||||
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
|
||||
|
||||
<book id="Tracepoints">
|
||||
<bookinfo>
|
||||
<title>The Linux Kernel Tracepoint API</title>
|
||||
|
||||
<authorgroup>
|
||||
<author>
|
||||
<firstname>Jason</firstname>
|
||||
<surname>Baron</surname>
|
||||
<affiliation>
|
||||
<address>
|
||||
<email>jbaron@redhat.com</email>
|
||||
</address>
|
||||
</affiliation>
|
||||
</author>
|
||||
</authorgroup>
|
||||
|
||||
<legalnotice>
|
||||
<para>
|
||||
This documentation is free software; you can redistribute
|
||||
it and/or modify it under the terms of the GNU General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2 of the License, or (at your option) any later
|
||||
version.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
This program is distributed in the hope that it will be
|
||||
useful, but WITHOUT ANY WARRANTY; without even the implied
|
||||
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU General Public License for more details.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
You should have received a copy of the GNU General Public
|
||||
License along with this program; if not, write to the Free
|
||||
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
MA 02111-1307 USA
|
||||
</para>
|
||||
|
||||
<para>
|
||||
For more details see the file COPYING in the source
|
||||
distribution of Linux.
|
||||
</para>
|
||||
</legalnotice>
|
||||
</bookinfo>
|
||||
|
||||
<toc></toc>
|
||||
<chapter id="intro">
|
||||
<title>Introduction</title>
|
||||
<para>
|
||||
Tracepoints are static probe points that are located in strategic points
|
||||
throughout the kernel. 'Probes' register/unregister with tracepoints
|
||||
via a callback mechanism. The 'probes' are strictly typed functions that
|
||||
are passed a unique set of parameters defined by each tracepoint.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
From this simple callback mechanism, 'probes' can be used to profile, debug,
|
||||
and understand kernel behavior. There are a number of tools that provide a
|
||||
framework for using 'probes'. These tools include Systemtap, ftrace, and
|
||||
LTTng.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
Tracepoints are defined in a number of header files via various macros. Thus,
|
||||
the purpose of this document is to provide a clear accounting of the available
|
||||
tracepoints. The intention is to understand not only what tracepoints are
|
||||
available but also to understand where future tracepoints might be added.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
The API presented has functions of the form:
|
||||
<function>trace_tracepointname(function parameters)</function>. These are the
|
||||
tracepoints callbacks that are found throughout the code. Registering and
|
||||
unregistering probes with these callback sites is covered in the
|
||||
<filename>Documentation/trace/*</filename> directory.
|
||||
</para>
|
||||
</chapter>
|
||||
|
||||
<chapter id="irq">
|
||||
<title>IRQ</title>
|
||||
!Iinclude/trace/events/irq.h
|
||||
</chapter>
|
||||
|
||||
</book>
|
||||
|
|
@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
|
|||
The output of "cat rcu/rcudata" looks as follows:
|
||||
|
||||
rcu:
|
||||
0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
|
||||
1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
|
||||
2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
|
||||
3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
|
||||
4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
|
||||
5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
|
||||
6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
|
||||
7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
|
||||
rcu:
|
||||
0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
|
||||
1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
|
||||
2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
|
||||
3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
|
||||
4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
|
||||
5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
|
||||
6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
|
||||
7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
|
||||
rcu_bh:
|
||||
0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
|
||||
1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
|
||||
2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
|
||||
3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
|
||||
4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
|
||||
5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
|
||||
6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
|
||||
7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
|
||||
0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
|
||||
1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
|
||||
2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
|
||||
4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
|
||||
The first section lists the rcu_data structures for rcu, the second for
|
||||
rcu_bh. Each section has one line per CPU, or eight for this 8-CPU system.
|
||||
|
|
@ -253,12 +254,6 @@ o "pqc" indicates which grace period the last-observed quiescent
|
|||
o "qp" indicates that RCU still expects a quiescent state from
|
||||
this CPU.
|
||||
|
||||
o "rpfq" is the number of rcu_pending() calls on this CPU required
|
||||
to induce this CPU to invoke force_quiescent_state().
|
||||
|
||||
o "rp" is low-order four hex digits of the count of how many times
|
||||
rcu_pending() has been invoked on this CPU.
|
||||
|
||||
o "dt" is the current value of the dyntick counter that is incremented
|
||||
when entering or leaving dynticks idle state, either by the
|
||||
scheduler or by irq. The number after the "/" is the interrupt
|
||||
|
|
@ -305,6 +300,9 @@ o "b" is the batch limit for this CPU. If more than this number
|
|||
of RCU callbacks is ready to invoke, then the remainder will
|
||||
be deferred.
|
||||
|
||||
There is also an rcu/rcudata.csv file with the same information in
|
||||
comma-separated-variable spreadsheet format.
|
||||
|
||||
|
||||
The output of "cat rcu/rcugp" looks as follows:
|
||||
|
||||
|
|
@ -411,3 +409,63 @@ o Each element of the form "1/1 0:127 ^0" represents one struct
|
|||
For example, the first entry at the lowest level shows
|
||||
"^0", indicating that it corresponds to bit zero in
|
||||
the first entry at the middle level.
|
||||
|
||||
|
||||
The output of "cat rcu/rcu_pending" looks as follows:
|
||||
|
||||
rcu:
|
||||
0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
|
||||
1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
|
||||
2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
|
||||
3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
|
||||
4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
|
||||
5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
|
||||
6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
|
||||
7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
|
||||
rcu_bh:
|
||||
0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
|
||||
1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
|
||||
2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
|
||||
3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
|
||||
4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
|
||||
5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
|
||||
6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
|
||||
7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
|
||||
|
||||
As always, this is once again split into "rcu" and "rcu_bh" portions.
|
||||
The fields are as follows:
|
||||
|
||||
o "np" is the number of times that __rcu_pending() has been invoked
|
||||
for the corresponding flavor of RCU.
|
||||
|
||||
o "qsp" is the number of times that the RCU was waiting for a
|
||||
quiescent state from this CPU.
|
||||
|
||||
o "cbr" is the number of times that this CPU had RCU callbacks
|
||||
that had passed through a grace period, and were thus ready
|
||||
to be invoked.
|
||||
|
||||
o "cng" is the number of times that this CPU needed another
|
||||
grace period while RCU was idle.
|
||||
|
||||
o "gpc" is the number of times that an old grace period had
|
||||
completed, but this CPU was not yet aware of it.
|
||||
|
||||
o "gps" is the number of times that a new grace period had started,
|
||||
but this CPU was not yet aware of it.
|
||||
|
||||
o "nf" is the number of times that this CPU suspected that the
|
||||
current grace period had run for too long, and thus needed to
|
||||
be forced.
|
||||
|
||||
Please note that "forcing" consists of sending resched IPIs
|
||||
to holdout CPUs. If that CPU really still is in an old RCU
|
||||
read-side critical section, then we really do have to wait for it.
|
||||
The assumption behing "forcing" is that the CPU is not still in
|
||||
an old RCU read-side critical section, but has not yet responded
|
||||
for some other reason.
|
||||
|
||||
o "nn" is the number of times that this CPU needed nothing. Alert
|
||||
readers will note that the rcu "nn" number for a given CPU very
|
||||
closely matches the rcu_bh "np" number for that same CPU. This
|
||||
is due to short-circuit evaluation in rcu_pending().
|
||||
|
|
|
|||
|
|
@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
|
|||
Author:
|
||||
Christoph Rohland <cr@sap.com>, 1.12.01
|
||||
Updated:
|
||||
Hugh Dickins <hugh@veritas.com>, 4 June 2007
|
||||
Hugh Dickins, 4 June 2007
|
||||
|
|
|
|||
|
|
@ -0,0 +1,131 @@
|
|||
Futex Requeue PI
|
||||
----------------
|
||||
|
||||
Requeueing of tasks from a non-PI futex to a PI futex requires
|
||||
special handling in order to ensure the underlying rt_mutex is never
|
||||
left without an owner if it has waiters; doing so would break the PI
|
||||
boosting logic [see rt-mutex-desgin.txt] For the purposes of
|
||||
brevity, this action will be referred to as "requeue_pi" throughout
|
||||
this document. Priority inheritance is abbreviated throughout as
|
||||
"PI".
|
||||
|
||||
Motivation
|
||||
----------
|
||||
|
||||
Without requeue_pi, the glibc implementation of
|
||||
pthread_cond_broadcast() must resort to waking all the tasks waiting
|
||||
on a pthread_condvar and letting them try to sort out which task
|
||||
gets to run first in classic thundering-herd formation. An ideal
|
||||
implementation would wake the highest-priority waiter, and leave the
|
||||
rest to the natural wakeup inherent in unlocking the mutex
|
||||
associated with the condvar.
|
||||
|
||||
Consider the simplified glibc calls:
|
||||
|
||||
/* caller must lock mutex */
|
||||
pthread_cond_wait(cond, mutex)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(mutex);
|
||||
do {
|
||||
unlock(cond->__data.__lock);
|
||||
futex_wait(cond->__data.__futex);
|
||||
lock(cond->__data.__lock);
|
||||
} while(...)
|
||||
unlock(cond->__data.__lock);
|
||||
lock(mutex);
|
||||
}
|
||||
|
||||
pthread_cond_broadcast(cond)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(cond->__data.__lock);
|
||||
futex_requeue(cond->data.__futex, cond->mutex);
|
||||
}
|
||||
|
||||
Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
|
||||
has waiters. Note that pthread_cond_wait() attempts to lock the
|
||||
mutex only after it has returned to user space. This will leave the
|
||||
underlying rt_mutex with waiters, and no owner, breaking the
|
||||
previously mentioned PI-boosting algorithms.
|
||||
|
||||
In order to support PI-aware pthread_condvar's, the kernel needs to
|
||||
be able to requeue tasks to PI futexes. This support implies that
|
||||
upon a successful futex_wait system call, the caller would return to
|
||||
user space already holding the PI futex. The glibc implementation
|
||||
would be modified as follows:
|
||||
|
||||
|
||||
/* caller must lock mutex */
|
||||
pthread_cond_wait_pi(cond, mutex)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(mutex);
|
||||
do {
|
||||
unlock(cond->__data.__lock);
|
||||
futex_wait_requeue_pi(cond->__data.__futex);
|
||||
lock(cond->__data.__lock);
|
||||
} while(...)
|
||||
unlock(cond->__data.__lock);
|
||||
/* the kernel acquired the the mutex for us */
|
||||
}
|
||||
|
||||
pthread_cond_broadcast_pi(cond)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(cond->__data.__lock);
|
||||
futex_requeue_pi(cond->data.__futex, cond->mutex);
|
||||
}
|
||||
|
||||
The actual glibc implementation will likely test for PI and make the
|
||||
necessary changes inside the existing calls rather than creating new
|
||||
calls for the PI cases. Similar changes are needed for
|
||||
pthread_cond_timedwait() and pthread_cond_signal().
|
||||
|
||||
Implementation
|
||||
--------------
|
||||
|
||||
In order to ensure the rt_mutex has an owner if it has waiters, it
|
||||
is necessary for both the requeue code, as well as the waiting code,
|
||||
to be able to acquire the rt_mutex before returning to user space.
|
||||
The requeue code cannot simply wake the waiter and leave it to
|
||||
acquire the rt_mutex as it would open a race window between the
|
||||
requeue call returning to user space and the waiter waking and
|
||||
starting to run. This is especially true in the uncontended case.
|
||||
|
||||
The solution involves two new rt_mutex helper routines,
|
||||
rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
|
||||
allow the requeue code to acquire an uncontended rt_mutex on behalf
|
||||
of the waiter and to enqueue the waiter on a contended rt_mutex.
|
||||
Two new system calls provide the kernel<->user interface to
|
||||
requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
|
||||
|
||||
FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
|
||||
and pthread_cond_timedwait()) to block on the initial futex and wait
|
||||
to be requeued to a PI-aware futex. The implementation is the
|
||||
result of a high-speed collision between futex_wait() and
|
||||
futex_lock_pi(), with some extra logic to check for the additional
|
||||
wake-up scenarios.
|
||||
|
||||
FUTEX_REQUEUE_CMP_PI is called by the waker
|
||||
(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
|
||||
possibly wake the waiting tasks. Internally, this system call is
|
||||
still handled by futex_requeue (by passing requeue_pi=1). Before
|
||||
requeueing, futex_requeue() attempts to acquire the requeue target
|
||||
PI futex on behalf of the top waiter. If it can, this waiter is
|
||||
woken. futex_requeue() then proceeds to requeue the remaining
|
||||
nr_wake+nr_requeue tasks to the PI futex, calling
|
||||
rt_mutex_start_proxy_lock() prior to each requeue to prepare the
|
||||
task as a waiter on the underlying rt_mutex. It is possible that
|
||||
the lock can be acquired at this stage as well, if so, the next
|
||||
waiter is woken to finish the acquisition of the lock.
|
||||
|
||||
FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
|
||||
their sum is all that really matters. futex_requeue() will wake or
|
||||
requeue up to nr_wake + nr_requeue tasks. It will wake only as many
|
||||
tasks as it can acquire the lock for, which in the majority of cases
|
||||
should be 0 as good programming practice dictates that the caller of
|
||||
either pthread_cond_broadcast() or pthread_cond_signal() acquire the
|
||||
mutex prior to making the call. FUTEX_REQUEUE_PI requires that
|
||||
nr_wake=1. nr_requeue should be INT_MAX for broadcast and 0 for
|
||||
signal.
|
||||
|
|
@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value
|
|||
Unit: revolution/min (RPM)
|
||||
RW
|
||||
|
||||
fan[1-*]_max Fan maximum value
|
||||
Unit: revolution/min (RPM)
|
||||
Only rarely supported by the hardware.
|
||||
RW
|
||||
|
||||
fan[1-*]_input Fan input value.
|
||||
Unit: revolution/min (RPM)
|
||||
RO
|
||||
|
|
@ -390,6 +395,7 @@ OR
|
|||
in[0-*]_min_alarm
|
||||
in[0-*]_max_alarm
|
||||
fan[1-*]_min_alarm
|
||||
fan[1-*]_max_alarm
|
||||
temp[1-*]_min_alarm
|
||||
temp[1-*]_max_alarm
|
||||
temp[1-*]_crit_alarm
|
||||
|
|
|
|||
|
|
@ -18,8 +18,12 @@ Usage
|
|||
Anonymous finger details are sent sequentially as separate packets of ABS
|
||||
events. Only the ABS_MT events are recognized as part of a finger
|
||||
packet. The end of a packet is marked by calling the input_mt_sync()
|
||||
function, which generates a SYN_MT_REPORT event. The end of multi-touch
|
||||
transfer is marked by calling the usual input_sync() function.
|
||||
function, which generates a SYN_MT_REPORT event. This instructs the
|
||||
receiver to accept the data for the current finger and prepare to receive
|
||||
another. The end of a multi-touch transfer is marked by calling the usual
|
||||
input_sync() function. This instructs the receiver to act upon events
|
||||
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
|
||||
set of events/packets.
|
||||
|
||||
A set of ABS_MT events with the desired properties is defined. The events
|
||||
are divided into categories, to allow for partial implementation. The
|
||||
|
|
@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
|
|||
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
|
||||
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
|
||||
of the approaching finger. Anisotropy and direction may be specified with
|
||||
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
|
||||
more granular information may specify general shapes as blobs, i.e., as a
|
||||
sequence of rectangular shapes grouped together by an
|
||||
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
|
||||
whether the touching tool is a finger or a pen or something else.
|
||||
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
|
||||
ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
|
||||
finger or a pen or something else. Devices with more granular information
|
||||
may specify general shapes as blobs, i.e., as a sequence of rectangular
|
||||
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
|
||||
that currently support it, the ABS_MT_TRACKING_ID event may be used to
|
||||
report finger tracking from hardware [5].
|
||||
|
||||
Here is what a minimal event sequence for a two-finger touch would look
|
||||
like:
|
||||
|
||||
ABS_MT_TOUCH_MAJOR
|
||||
ABS_MT_POSITION_X
|
||||
ABS_MT_POSITION_Y
|
||||
SYN_MT_REPORT
|
||||
ABS_MT_TOUCH_MAJOR
|
||||
ABS_MT_POSITION_X
|
||||
ABS_MT_POSITION_Y
|
||||
SYN_MT_REPORT
|
||||
SYN_REPORT
|
||||
|
||||
|
||||
Event Semantics
|
||||
|
|
@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
|
|||
|
||||
The length of the major axis of the contact. The length should be given in
|
||||
surface units. If the surface has an X times Y resolution, the largest
|
||||
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
|
||||
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
|
||||
|
||||
ABS_MT_TOUCH_MINOR
|
||||
|
||||
The length, in surface units, of the minor axis of the contact. If the
|
||||
contact is circular, this event can be omitted.
|
||||
contact is circular, this event can be omitted [4].
|
||||
|
||||
ABS_MT_WIDTH_MAJOR
|
||||
|
||||
The length, in surface units, of the major axis of the approaching
|
||||
tool. This should be understood as the size of the tool itself. The
|
||||
orientation of the contact and the approaching tool are assumed to be the
|
||||
same.
|
||||
same [4].
|
||||
|
||||
ABS_MT_WIDTH_MINOR
|
||||
|
||||
The length, in surface units, of the minor axis of the approaching
|
||||
tool. Omit if circular.
|
||||
tool. Omit if circular [4].
|
||||
|
||||
The above four values can be used to derive additional information about
|
||||
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
|
||||
|
|
@ -70,14 +89,17 @@ different characteristic widths [1].
|
|||
|
||||
ABS_MT_ORIENTATION
|
||||
|
||||
The orientation of the ellipse. The value should describe half a revolution
|
||||
clockwise around the touch center. The scale of the value is arbitrary, but
|
||||
zero should be returned for an ellipse aligned along the Y axis of the
|
||||
surface. As an example, an index finger placed straight onto the axis could
|
||||
return zero orientation, something negative when twisted to the left, and
|
||||
something positive when twisted to the right. This value can be omitted if
|
||||
the touching object is circular, or if the information is not available in
|
||||
the kernel driver.
|
||||
The orientation of the ellipse. The value should describe a signed quarter
|
||||
of a revolution clockwise around the touch center. The signed value range
|
||||
is arbitrary, but zero should be returned for a finger aligned along the Y
|
||||
axis of the surface, a negative value when finger is turned to the left, and
|
||||
a positive value when finger turned to the right. When completely aligned with
|
||||
the X axis, the range max should be returned. Orientation can be omitted
|
||||
if the touching object is circular, or if the information is not available
|
||||
in the kernel driver. Partial orientation support is possible if the device
|
||||
can distinguish between the two axis, but not (uniquely) any values in
|
||||
between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
|
||||
[4].
|
||||
|
||||
ABS_MT_POSITION_X
|
||||
|
||||
|
|
@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
|
|||
|
||||
The BLOB_ID groups several packets together into one arbitrarily shaped
|
||||
contact. This is a low-level anonymous grouping, and should not be confused
|
||||
with the high-level contactID, explained below. Most kernel drivers will
|
||||
not have this capability, and can safely omit the event.
|
||||
with the high-level trackingID [5]. Most kernel drivers will not have blob
|
||||
capability, and can safely omit the event.
|
||||
|
||||
ABS_MT_TRACKING_ID
|
||||
|
||||
The TRACKING_ID identifies an initiated contact throughout its life cycle
|
||||
[5]. There are currently only a few devices that support it, so this event
|
||||
should normally be omitted.
|
||||
|
||||
|
||||
Event Computation
|
||||
-----------------
|
||||
|
||||
The flora of different hardware unavoidably leads to some devices fitting
|
||||
better to the MT protocol than others. To simplify and unify the mapping,
|
||||
this section gives recipes for how to compute certain events.
|
||||
|
||||
For devices reporting contacts as rectangular shapes, signed orientation
|
||||
cannot be obtained. Assuming X and Y are the lengths of the sides of the
|
||||
touching rectangle, here is a simple formula that retains the most
|
||||
information possible:
|
||||
|
||||
ABS_MT_TOUCH_MAJOR := max(X, Y)
|
||||
ABS_MT_TOUCH_MINOR := min(X, Y)
|
||||
ABS_MT_ORIENTATION := bool(X > Y)
|
||||
|
||||
The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
|
||||
the device can distinguish between a finger along the Y axis (0) and a
|
||||
finger along the X axis (1).
|
||||
|
||||
|
||||
Finger Tracking
|
||||
|
|
@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
|
|||
anonymous contacts currently on the surface. The order in which the packets
|
||||
appear in the event stream is not important.
|
||||
|
||||
The process of finger tracking, i.e., to assign a unique contactID to each
|
||||
The process of finger tracking, i.e., to assign a unique trackingID to each
|
||||
initiated contact on the surface, is left to user space; preferably the
|
||||
multi-touch X driver [3]. In that driver, the contactID stays the same and
|
||||
multi-touch X driver [3]. In that driver, the trackingID stays the same and
|
||||
unique until the contact vanishes (when the finger leaves the surface). The
|
||||
problem of assigning a set of anonymous fingers to a set of identified
|
||||
fingers is a euclidian bipartite matching problem at each event update, and
|
||||
relies on a sufficiently rapid update rate.
|
||||
|
||||
There are a few devices that support trackingID in hardware. User space can
|
||||
make use of these native identifiers to reduce bandwidth and cpu usage.
|
||||
|
||||
|
||||
Notes
|
||||
-----
|
||||
|
||||
|
|
@ -136,5 +189,7 @@ could be used to derive tilt.
|
|||
time of writing (April 2009), the MT protocol is not yet merged, and the
|
||||
prototype implements finger matching, basic mouse support and two-finger
|
||||
scrolling. The project aims at improving the quality of current multi-touch
|
||||
functionality available in the synaptics X driver, and in addition
|
||||
functionality available in the Synaptics X driver, and in addition
|
||||
implement more advanced gestures.
|
||||
[4] See the section on event computation.
|
||||
[5] See the section on finger tracking.
|
||||
|
|
|
|||
|
|
@ -56,7 +56,6 @@ parameter is applicable:
|
|||
ISAPNP ISA PnP code is enabled.
|
||||
ISDN Appropriate ISDN support is enabled.
|
||||
JOY Appropriate joystick support is enabled.
|
||||
KMEMTRACE kmemtrace is enabled.
|
||||
LIBATA Libata driver is enabled
|
||||
LP Printer support is enabled.
|
||||
LOOP Loopback device support is enabled.
|
||||
|
|
@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
flushed before they will be reused, which
|
||||
is a lot of faster
|
||||
|
||||
amd_iommu_size= [HW,X86-64]
|
||||
Define the size of the aperture for the AMD IOMMU
|
||||
driver. Possible values are:
|
||||
'32M', '64M' (default), '128M', '256M', '512M', '1G'
|
||||
|
||||
amijoy.map= [HW,JOY] Amiga joystick support
|
||||
Map of devices attached to JOY0DAT and JOY1DAT
|
||||
Format: <a>,<b>
|
||||
|
|
@ -646,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
DMA-API debugging code disables itself because the
|
||||
architectural default is too low.
|
||||
|
||||
dma_debug_driver=<driver_name>
|
||||
With this option the DMA-API debugging driver
|
||||
filter feature can be enabled at boot time. Just
|
||||
pass the driver to filter for as the parameter.
|
||||
The filter can be disabled or changed to another
|
||||
driver later using sysfs.
|
||||
|
||||
dscc4.setup= [NET]
|
||||
|
||||
dtc3181e= [HW,SCSI]
|
||||
|
|
@ -752,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
|
||||
|
||||
ftrace=[tracer]
|
||||
[ftrace] will set and start the specified tracer
|
||||
[FTRACE] will set and start the specified tracer
|
||||
as early as possible in order to facilitate early
|
||||
boot debugging.
|
||||
|
||||
ftrace_dump_on_oops
|
||||
[ftrace] will dump the trace buffers on oops.
|
||||
[FTRACE] will dump the trace buffers on oops.
|
||||
|
||||
ftrace_filter=[function-list]
|
||||
[FTRACE] Limit the functions traced by the function
|
||||
tracer at boot up. function-list is a comma separated
|
||||
list of functions. This list can be changed at run
|
||||
time by the set_ftrace_filter file in the debugfs
|
||||
tracing directory.
|
||||
|
||||
ftrace_notrace=[function-list]
|
||||
[FTRACE] Do not trace the functions specified in
|
||||
function-list. This list can be changed at run time
|
||||
by the set_ftrace_notrace file in the debugfs
|
||||
tracing directory.
|
||||
|
||||
gamecon.map[2|3]=
|
||||
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
|
||||
|
|
@ -1054,15 +1068,6 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
use the HighMem zone if it exists, and the Normal
|
||||
zone if it does not.
|
||||
|
||||
kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no }
|
||||
Controls whether kmemtrace is enabled
|
||||
at boot-time.
|
||||
|
||||
kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of
|
||||
subbufs kmemtrace's relay channel has. Set this
|
||||
higher than default (KMEMTRACE_N_SUBBUFS in code) if
|
||||
you experience buffer overruns.
|
||||
|
||||
kgdboc= [HW] kgdb over consoles.
|
||||
Requires a tty driver that supports console polling.
|
||||
(only serial suported for now)
|
||||
|
|
@ -1535,6 +1540,10 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
register save and restore. The kernel will only save
|
||||
legacy floating-point registers on task switch.
|
||||
|
||||
noxsave [BUGS=X86] Disables x86 extended register state save
|
||||
and restore using xsave. The kernel will fallback to
|
||||
enabling legacy floating-point and sse state.
|
||||
|
||||
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
|
||||
wfi(ARM) instruction doesn't work correctly and not to
|
||||
use it. This is also useful when using JTAG debugger.
|
||||
|
|
@ -1571,6 +1580,9 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
noinitrd [RAM] Tells the kernel not to load any configured
|
||||
initial RAM disk.
|
||||
|
||||
nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
|
||||
remapping.
|
||||
|
||||
nointroute [IA-64]
|
||||
|
||||
nojitter [IA64] Disables jitter checking for ITC timers.
|
||||
|
|
@ -1656,6 +1668,14 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
oprofile.timer= [HW]
|
||||
Use timer interrupt instead of performance counters
|
||||
|
||||
oprofile.cpu_type= Force an oprofile cpu type
|
||||
This might be useful if you have an older oprofile
|
||||
userland or if you want common events.
|
||||
Format: { archperfmon }
|
||||
archperfmon: [X86] Force use of architectural
|
||||
perfmon on Intel CPUs instead of the
|
||||
CPU specific event set.
|
||||
|
||||
osst= [HW,SCSI] SCSI Tape Driver
|
||||
Format: <buffer_size>,<write_threshold>
|
||||
See also Documentation/scsi/st.txt.
|
||||
|
|
|
|||
|
|
@ -31,6 +31,7 @@ Contents:
|
|||
|
||||
- Locking functions.
|
||||
- Interrupt disabling functions.
|
||||
- Sleep and wake-up functions.
|
||||
- Miscellaneous functions.
|
||||
|
||||
(*) Inter-CPU locking barrier effects.
|
||||
|
|
@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some
|
|||
other means.
|
||||
|
||||
|
||||
SLEEP AND WAKE-UP FUNCTIONS
|
||||
---------------------------
|
||||
|
||||
Sleeping and waking on an event flagged in global data can be viewed as an
|
||||
interaction between two pieces of data: the task state of the task waiting for
|
||||
the event and the global data used to indicate the event. To make sure that
|
||||
these appear to happen in the right order, the primitives to begin the process
|
||||
of going to sleep, and the primitives to initiate a wake up imply certain
|
||||
barriers.
|
||||
|
||||
Firstly, the sleeper normally follows something like this sequence of events:
|
||||
|
||||
for (;;) {
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
if (event_indicated)
|
||||
break;
|
||||
schedule();
|
||||
}
|
||||
|
||||
A general memory barrier is interpolated automatically by set_current_state()
|
||||
after it has altered the task state:
|
||||
|
||||
CPU 1
|
||||
===============================
|
||||
set_current_state();
|
||||
set_mb();
|
||||
STORE current->state
|
||||
<general barrier>
|
||||
LOAD event_indicated
|
||||
|
||||
set_current_state() may be wrapped by:
|
||||
|
||||
prepare_to_wait();
|
||||
prepare_to_wait_exclusive();
|
||||
|
||||
which therefore also imply a general memory barrier after setting the state.
|
||||
The whole sequence above is available in various canned forms, all of which
|
||||
interpolate the memory barrier in the right place:
|
||||
|
||||
wait_event();
|
||||
wait_event_interruptible();
|
||||
wait_event_interruptible_exclusive();
|
||||
wait_event_interruptible_timeout();
|
||||
wait_event_killable();
|
||||
wait_event_timeout();
|
||||
wait_on_bit();
|
||||
wait_on_bit_lock();
|
||||
|
||||
|
||||
Secondly, code that performs a wake up normally follows something like this:
|
||||
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
or:
|
||||
|
||||
event_indicated = 1;
|
||||
wake_up_process(event_daemon);
|
||||
|
||||
A write memory barrier is implied by wake_up() and co. if and only if they wake
|
||||
something up. The barrier occurs before the task state is cleared, and so sits
|
||||
between the STORE to indicate the event and the STORE to set TASK_RUNNING:
|
||||
|
||||
CPU 1 CPU 2
|
||||
=============================== ===============================
|
||||
set_current_state(); STORE event_indicated
|
||||
set_mb(); wake_up();
|
||||
STORE current->state <write barrier>
|
||||
<general barrier> STORE current->state
|
||||
LOAD event_indicated
|
||||
|
||||
The available waker functions include:
|
||||
|
||||
complete();
|
||||
wake_up();
|
||||
wake_up_all();
|
||||
wake_up_bit();
|
||||
wake_up_interruptible();
|
||||
wake_up_interruptible_all();
|
||||
wake_up_interruptible_nr();
|
||||
wake_up_interruptible_poll();
|
||||
wake_up_interruptible_sync();
|
||||
wake_up_interruptible_sync_poll();
|
||||
wake_up_locked();
|
||||
wake_up_locked_poll();
|
||||
wake_up_nr();
|
||||
wake_up_poll();
|
||||
wake_up_process();
|
||||
|
||||
|
||||
[!] Note that the memory barriers implied by the sleeper and the waker do _not_
|
||||
order multiple stores before the wake-up with respect to loads of those stored
|
||||
values after the sleeper has called set_current_state(). For instance, if the
|
||||
sleeper does:
|
||||
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
if (event_indicated)
|
||||
break;
|
||||
__set_current_state(TASK_RUNNING);
|
||||
do_something(my_data);
|
||||
|
||||
and the waker does:
|
||||
|
||||
my_data = value;
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
there's no guarantee that the change to event_indicated will be perceived by
|
||||
the sleeper as coming after the change to my_data. In such a circumstance, the
|
||||
code on both sides must interpolate its own memory barriers between the
|
||||
separate data accesses. Thus the above sleeper ought to do:
|
||||
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
if (event_indicated) {
|
||||
smp_rmb();
|
||||
do_something(my_data);
|
||||
}
|
||||
|
||||
and the waker should do:
|
||||
|
||||
my_data = value;
|
||||
smp_wmb();
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
|
||||
MISCELLANEOUS FUNCTIONS
|
||||
-----------------------
|
||||
|
||||
|
|
@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED?
|
|||
|
||||
Under normal operation, memory operation reordering is generally not going to
|
||||
be a problem as a single-threaded linear piece of code will still appear to
|
||||
work correctly, even if it's in an SMP kernel. There are, however, three
|
||||
work correctly, even if it's in an SMP kernel. There are, however, four
|
||||
circumstances in which reordering definitely _could_ be a problem:
|
||||
|
||||
(*) Interprocessor interaction.
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
CONTENTS
|
||||
========
|
||||
|
||||
0. WARNING
|
||||
1. Overview
|
||||
1.1 The problem
|
||||
1.2 The solution
|
||||
|
|
@ -14,6 +15,23 @@ CONTENTS
|
|||
3. Future plans
|
||||
|
||||
|
||||
0. WARNING
|
||||
==========
|
||||
|
||||
Fiddling with these settings can result in an unstable system, the knobs are
|
||||
root only and assumes root knows what he is doing.
|
||||
|
||||
Most notable:
|
||||
|
||||
* very small values in sched_rt_period_us can result in an unstable
|
||||
system when the period is smaller than either the available hrtimer
|
||||
resolution, or the time it takes to handle the budget refresh itself.
|
||||
|
||||
* very small values in sched_rt_runtime_us can result in an unstable
|
||||
system when the runtime is so small the system has difficulty making
|
||||
forward progress (NOTE: the migration thread and kstopmachine both
|
||||
are real-time processes).
|
||||
|
||||
1. Overview
|
||||
===========
|
||||
|
||||
|
|
@ -169,7 +187,7 @@ get their allocated time.
|
|||
|
||||
Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
|
||||
the biggest challenge as the current linux PI infrastructure is geared towards
|
||||
the limited static priority levels 0-139. With deadline scheduling you need to
|
||||
the limited static priority levels 0-99. With deadline scheduling you need to
|
||||
do deadline inheritance (since priority is inversely proportional to the
|
||||
deadline delta (deadline - now).
|
||||
|
||||
|
|
|
|||
|
|
@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
|
|||
ref-no-jd Reference board without HP/Mic jack detection
|
||||
3stack D965 3stack
|
||||
5stack D965 5stack + SPDIF
|
||||
5stack-no-fp D965 5stack without front panel
|
||||
dell-3stack Dell Dimension E520
|
||||
dell-bios Fixes with Dell BIOS setup
|
||||
auto BIOS setup (default)
|
||||
|
|
|
|||
|
|
@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
|
|||
When this value is greater than 1, the driver will show the
|
||||
stack trace additionally. This may help the debugging.
|
||||
|
||||
Since 2.6.30, this option also enables the hwptr check using
|
||||
jiffies. This detects spontaneous invalid pointer callback
|
||||
values, but can be lead to too much corrections for a (mostly
|
||||
buggy) hardware that doesn't give smooth pointer updates.
|
||||
|
||||
card*/pcm*/sub*/info
|
||||
The general information of this PCM sub-stream.
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,90 @@
|
|||
Event Tracing
|
||||
|
||||
Documentation written by Theodore Ts'o
|
||||
Updated by Li Zefan
|
||||
|
||||
1. Introduction
|
||||
===============
|
||||
|
||||
Tracepoints (see Documentation/trace/tracepoints.txt) can be used
|
||||
without creating custom kernel modules to register probe functions
|
||||
using the event tracing infrastructure.
|
||||
|
||||
Not all tracepoints can be traced using the event tracing system;
|
||||
the kernel developer must provide code snippets which define how the
|
||||
tracing information is saved into the tracing buffer, and how the
|
||||
tracing information should be printed.
|
||||
|
||||
2. Using Event Tracing
|
||||
======================
|
||||
|
||||
2.1 Via the 'set_event' interface
|
||||
---------------------------------
|
||||
|
||||
The events which are available for tracing can be found in the file
|
||||
/debug/tracing/available_events.
|
||||
|
||||
To enable a particular event, such as 'sched_wakeup', simply echo it
|
||||
to /debug/tracing/set_event. For example:
|
||||
|
||||
# echo sched_wakeup >> /debug/tracing/set_event
|
||||
|
||||
[ Note: '>>' is necessary, otherwise it will firstly disable
|
||||
all the events. ]
|
||||
|
||||
To disable an event, echo the event name to the set_event file prefixed
|
||||
with an exclamation point:
|
||||
|
||||
# echo '!sched_wakeup' >> /debug/tracing/set_event
|
||||
|
||||
To disable all events, echo an empty line to the set_event file:
|
||||
|
||||
# echo > /debug/tracing/set_event
|
||||
|
||||
To enable all events, echo '*:*' or '*:' to the set_event file:
|
||||
|
||||
# echo *:* > /debug/tracing/set_event
|
||||
|
||||
The events are organized into subsystems, such as ext4, irq, sched,
|
||||
etc., and a full event name looks like this: <subsystem>:<event>. The
|
||||
subsystem name is optional, but it is displayed in the available_events
|
||||
file. All of the events in a subsystem can be specified via the syntax
|
||||
"<subsystem>:*"; for example, to enable all irq events, you can use the
|
||||
command:
|
||||
|
||||
# echo 'irq:*' > /debug/tracing/set_event
|
||||
|
||||
2.2 Via the 'enable' toggle
|
||||
---------------------------
|
||||
|
||||
The events available are also listed in /debug/tracing/events/ hierarchy
|
||||
of directories.
|
||||
|
||||
To enable event 'sched_wakeup':
|
||||
|
||||
# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
|
||||
|
||||
To disable it:
|
||||
|
||||
# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
|
||||
|
||||
To enable all events in sched subsystem:
|
||||
|
||||
# echo 1 > /debug/tracing/events/sched/enable
|
||||
|
||||
To eanble all events:
|
||||
|
||||
# echo 1 > /debug/tracing/events/enable
|
||||
|
||||
When reading one of these enable files, there are four results:
|
||||
|
||||
0 - all events this file affects are disabled
|
||||
1 - all events this file affects are enabled
|
||||
X - there is a mixture of events enabled and disabled
|
||||
? - this file does not affect any event
|
||||
|
||||
3. Defining an event-enabled tracepoint
|
||||
=======================================
|
||||
|
||||
See The example provided in samples/trace_events
|
||||
|
||||
|
|
@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
|
|||
|
||||
Function call tracer to trace all kernel functions.
|
||||
|
||||
"function_graph_tracer"
|
||||
"function_graph"
|
||||
|
||||
Similar to the function tracer except that the
|
||||
function tracer probes the functions on their entry
|
||||
|
|
@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
|
|||
values starting at 100 (nice -20). Below is a quick chart to map
|
||||
the kernel priority to user land priorities.
|
||||
|
||||
Kernel priority: 0 to 99 ==> user RT priority 99 to 0
|
||||
Kernel priority: 100 to 139 ==> user nice -20 to 19
|
||||
Kernel priority: 140 ==> idle task priority
|
||||
Kernel Space User Space
|
||||
===============================================================
|
||||
0(high) to 98(low) user RT priority 99(high) to 1(low)
|
||||
with SCHED_RR or SCHED_FIFO
|
||||
---------------------------------------------------------------
|
||||
99 sched_priority is not used in scheduling
|
||||
decisions(it must be specified as 0)
|
||||
---------------------------------------------------------------
|
||||
100(high) to 139(low) user nice -20(high) to 19(low)
|
||||
---------------------------------------------------------------
|
||||
140 idle task priority
|
||||
---------------------------------------------------------------
|
||||
|
||||
The task states are:
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
The power tracer collects detailed information about C-state and P-state
|
||||
transitions, instead of just looking at the high-level "average"
|
||||
information.
|
||||
|
||||
There is a helper script found in scrips/tracing/power.pl in the kernel
|
||||
sources which can be used to parse this information and create a
|
||||
Scalable Vector Graphics (SVG) picture from the trace data.
|
||||
|
||||
To use this tracer:
|
||||
|
||||
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
echo power > /sys/kernel/debug/tracing/current_tracer
|
||||
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
sleep 1
|
||||
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
cat /sys/kernel/debug/tracing/trace | \
|
||||
perl scripts/tracing/power.pl > out.sv
|
||||
|
|
@ -50,6 +50,10 @@ Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format
|
|||
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical
|
||||
pointer to single linked list of struct setup_data.
|
||||
|
||||
Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
|
||||
beyond the kernel_alignment added, new init_size and
|
||||
pref_address fields. Added extended boot loader IDs.
|
||||
|
||||
**** MEMORY LAYOUT
|
||||
|
||||
The traditional memory map for the kernel loader, used for Image or
|
||||
|
|
@ -168,12 +172,13 @@ Offset Proto Name Meaning
|
|||
021C/4 2.00+ ramdisk_size initrd size (set by boot loader)
|
||||
0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only
|
||||
0224/2 2.01+ heap_end_ptr Free memory after setup end
|
||||
0226/2 N/A pad1 Unused
|
||||
0226/1 2.02+(3 ext_loader_ver Extended boot loader version
|
||||
0227/1 2.02+(3 ext_loader_type Extended boot loader ID
|
||||
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
|
||||
022C/4 2.03+ ramdisk_max Highest legal initrd address
|
||||
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
|
||||
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
|
||||
0235/1 N/A pad2 Unused
|
||||
0235/1 2.10+ min_alignment Minimum alignment, as a power of two
|
||||
0236/2 N/A pad3 Unused
|
||||
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
|
||||
023C/4 2.07+ hardware_subarch Hardware subarchitecture
|
||||
|
|
@ -182,6 +187,8 @@ Offset Proto Name Meaning
|
|||
024C/4 2.08+ payload_length Length of kernel payload
|
||||
0250/8 2.09+ setup_data 64-bit physical pointer to linked list
|
||||
of struct setup_data
|
||||
0258/8 2.10+ pref_address Preferred loading address
|
||||
0260/4 2.10+ init_size Linear memory required during initialization
|
||||
|
||||
(1) For backwards compatibility, if the setup_sects field contains 0, the
|
||||
real value is 4.
|
||||
|
|
@ -190,6 +197,8 @@ Offset Proto Name Meaning
|
|||
field are unusable, which means the size of a bzImage kernel
|
||||
cannot be determined.
|
||||
|
||||
(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
|
||||
|
||||
If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
|
||||
the boot protocol version is "old". Loading an old kernel, the
|
||||
following parameters should be assumed:
|
||||
|
|
@ -343,18 +352,32 @@ Protocol: 2.00+
|
|||
0xTV here, where T is an identifier for the boot loader and V is
|
||||
a version number. Otherwise, enter 0xFF here.
|
||||
|
||||
For boot loader IDs above T = 0xD, write T = 0xE to this field and
|
||||
write the extended ID minus 0x10 to the ext_loader_type field.
|
||||
Similarly, the ext_loader_ver field can be used to provide more than
|
||||
four bits for the bootloader version.
|
||||
|
||||
For example, for T = 0x15, V = 0x234, write:
|
||||
|
||||
type_of_loader <- 0xE4
|
||||
ext_loader_type <- 0x05
|
||||
ext_loader_ver <- 0x23
|
||||
|
||||
Assigned boot loader ids:
|
||||
0 LILO (0x00 reserved for pre-2.00 bootloader)
|
||||
1 Loadlin
|
||||
2 bootsect-loader (0x20, all other values reserved)
|
||||
3 SYSLINUX
|
||||
4 EtherBoot
|
||||
3 Syslinux
|
||||
4 Etherboot/gPXE
|
||||
5 ELILO
|
||||
7 GRUB
|
||||
8 U-BOOT
|
||||
8 U-Boot
|
||||
9 Xen
|
||||
A Gujin
|
||||
B Qemu
|
||||
C Arcturus Networks uCbootloader
|
||||
E Extended (see ext_loader_type)
|
||||
F Special (0xFF = undefined)
|
||||
|
||||
Please contact <hpa@zytor.com> if you need a bootloader ID
|
||||
value assigned.
|
||||
|
|
@ -453,6 +476,35 @@ Protocol: 2.01+
|
|||
Set this field to the offset (from the beginning of the real-mode
|
||||
code) of the end of the setup stack/heap, minus 0x0200.
|
||||
|
||||
Field name: ext_loader_ver
|
||||
Type: write (optional)
|
||||
Offset/size: 0x226/1
|
||||
Protocol: 2.02+
|
||||
|
||||
This field is used as an extension of the version number in the
|
||||
type_of_loader field. The total version number is considered to be
|
||||
(type_of_loader & 0x0f) + (ext_loader_ver << 4).
|
||||
|
||||
The use of this field is boot loader specific. If not written, it
|
||||
is zero.
|
||||
|
||||
Kernels prior to 2.6.31 did not recognize this field, but it is safe
|
||||
to write for protocol version 2.02 or higher.
|
||||
|
||||
Field name: ext_loader_type
|
||||
Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0)
|
||||
Offset/size: 0x227/1
|
||||
Protocol: 2.02+
|
||||
|
||||
This field is used as an extension of the type number in
|
||||
type_of_loader field. If the type in type_of_loader is 0xE, then
|
||||
the actual type is (ext_loader_type + 0x10).
|
||||
|
||||
This field is ignored if the type in type_of_loader is not 0xE.
|
||||
|
||||
Kernels prior to 2.6.31 did not recognize this field, but it is safe
|
||||
to write for protocol version 2.02 or higher.
|
||||
|
||||
Field name: cmd_line_ptr
|
||||
Type: write (obligatory)
|
||||
Offset/size: 0x228/4
|
||||
|
|
@ -482,11 +534,19 @@ Protocol: 2.03+
|
|||
0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
|
||||
|
||||
Field name: kernel_alignment
|
||||
Type: read (reloc)
|
||||
Type: read/modify (reloc)
|
||||
Offset/size: 0x230/4
|
||||
Protocol: 2.05+
|
||||
Protocol: 2.05+ (read), 2.10+ (modify)
|
||||
|
||||
Alignment unit required by the kernel (if relocatable_kernel is true.)
|
||||
Alignment unit required by the kernel (if relocatable_kernel is
|
||||
true.) A relocatable kernel that is loaded at an alignment
|
||||
incompatible with the value in this field will be realigned during
|
||||
kernel initialization.
|
||||
|
||||
Starting with protocol version 2.10, this reflects the kernel
|
||||
alignment preferred for optimal performance; it is possible for the
|
||||
loader to modify this field to permit a lesser alignment. See the
|
||||
min_alignment and pref_address field below.
|
||||
|
||||
Field name: relocatable_kernel
|
||||
Type: read (reloc)
|
||||
|
|
@ -498,6 +558,22 @@ Protocol: 2.05+
|
|||
After loading, the boot loader must set the code32_start field to
|
||||
point to the loaded code, or to a boot loader hook.
|
||||
|
||||
Field name: min_alignment
|
||||
Type: read (reloc)
|
||||
Offset/size: 0x235/1
|
||||
Protocol: 2.10+
|
||||
|
||||
This field, if nonzero, indicates as a power of two the minimum
|
||||
alignment required, as opposed to preferred, by the kernel to boot.
|
||||
If a boot loader makes use of this field, it should update the
|
||||
kernel_alignment field with the alignment unit desired; typically:
|
||||
|
||||
kernel_alignment = 1 << min_alignment
|
||||
|
||||
There may be a considerable performance cost with an excessively
|
||||
misaligned kernel. Therefore, a loader should typically try each
|
||||
power-of-two alignment from kernel_alignment down to this alignment.
|
||||
|
||||
Field name: cmdline_size
|
||||
Type: read
|
||||
Offset/size: 0x238/4
|
||||
|
|
@ -582,6 +658,36 @@ Protocol: 2.09+
|
|||
sure to consider the case where the linked list already contains
|
||||
entries.
|
||||
|
||||
Field name: pref_address
|
||||
Type: read (reloc)
|
||||
Offset/size: 0x258/8
|
||||
Protocol: 2.10+
|
||||
|
||||
This field, if nonzero, represents a preferred load address for the
|
||||
kernel. A relocating bootloader should attempt to load at this
|
||||
address if possible.
|
||||
|
||||
A non-relocatable kernel will unconditionally move itself and to run
|
||||
at this address.
|
||||
|
||||
Field name: init_size
|
||||
Type: read
|
||||
Offset/size: 0x25c/4
|
||||
|
||||
This field indicates the amount of linear contiguous memory starting
|
||||
at the kernel runtime start address that the kernel needs before it
|
||||
is capable of examining its memory map. This is not the same thing
|
||||
as the total amount of memory the kernel needs to boot, but it can
|
||||
be used by a relocating boot loader to help select a safe load
|
||||
address for the kernel.
|
||||
|
||||
The kernel runtime start address is determined by the following algorithm:
|
||||
|
||||
if (relocatable_kernel)
|
||||
runtime_start = align_up(load_address, kernel_alignment)
|
||||
else
|
||||
runtime_start = pref_address
|
||||
|
||||
|
||||
**** THE IMAGE CHECKSUM
|
||||
|
||||
|
|
|
|||
|
|
@ -150,11 +150,6 @@ NUMA
|
|||
Otherwise, the remaining system RAM is allocated to an
|
||||
additional node.
|
||||
|
||||
numa=hotadd=percent
|
||||
Only allow hotadd memory to preallocate page structures upto
|
||||
percent of already available memory.
|
||||
numa=hotadd=0 will disable hotadd memory.
|
||||
|
||||
ACPI
|
||||
|
||||
acpi=off Don't enable ACPI
|
||||
|
|
|
|||
|
|
@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables:
|
|||
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
|
||||
hole caused by [48:63] sign extension
|
||||
ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
|
||||
ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
|
||||
ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
|
||||
ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
|
||||
ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
|
||||
ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
|
||||
ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
|
||||
ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
|
||||
ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
|
||||
ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
|
||||
... unused hole ...
|
||||
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
|
||||
ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
|
||||
|
|
|
|||
49
MAINTAINERS
49
MAINTAINERS
|
|
@ -434,7 +434,7 @@ F: arch/alpha/
|
|||
|
||||
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
|
||||
P: Thomas Dahlmann
|
||||
M: thomas.dahlmann@amd.com
|
||||
M: dahlmann.thomas@arcor.de
|
||||
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: drivers/usb/gadget/amd5536udc.*
|
||||
|
|
@ -624,6 +624,7 @@ M: paulius.zaleckas@teltonika.lt
|
|||
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
|
||||
T: git git://gitorious.org/linux-gemini/mainline.git
|
||||
S: Maintained
|
||||
F: arch/arm/mach-gemini/
|
||||
|
||||
ARM/EBSA110 MACHINE SUPPORT
|
||||
P: Russell King
|
||||
|
|
@ -650,6 +651,7 @@ P: Paulius Zaleckas
|
|||
M: paulius.zaleckas@teltonika.lt
|
||||
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
|
||||
S: Maintained
|
||||
F: arch/arm/mm/*-fa*
|
||||
|
||||
ARM/FOOTBRIDGE ARCHITECTURE
|
||||
P: Russell King
|
||||
|
|
@ -1132,17 +1134,17 @@ F: fs/bfs/
|
|||
F: include/linux/bfs_fs.h
|
||||
|
||||
BLACKFIN ARCHITECTURE
|
||||
P: Bryan Wu
|
||||
M: cooloney@kernel.org
|
||||
P: Mike Frysinger
|
||||
M: vapier@gentoo.org
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: arch/blackfin/
|
||||
|
||||
BLACKFIN EMAC DRIVER
|
||||
P: Bryan Wu
|
||||
M: cooloney@kernel.org
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
P: Michael Hennerich
|
||||
M: michael.hennerich@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/net/bfin_mac.*
|
||||
|
|
@ -1150,7 +1152,7 @@ F: drivers/net/bfin_mac.*
|
|||
BLACKFIN RTC DRIVER
|
||||
P: Mike Frysinger
|
||||
M: vapier.adi@gmail.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/rtc/rtc-bfin.c
|
||||
|
|
@ -1158,7 +1160,7 @@ F: drivers/rtc/rtc-bfin.c
|
|||
BLACKFIN SERIAL DRIVER
|
||||
P: Sonic Zhang
|
||||
M: sonic.zhang@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/serial/bfin_5xx.c
|
||||
|
|
@ -1166,7 +1168,7 @@ F: drivers/serial/bfin_5xx.c
|
|||
BLACKFIN WATCHDOG DRIVER
|
||||
P: Mike Frysinger
|
||||
M: vapier.adi@gmail.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/watchdog/bfin_wdt.c
|
||||
|
|
@ -1174,7 +1176,7 @@ F: drivers/watchdog/bfin_wdt.c
|
|||
BLACKFIN I2C TWI DRIVER
|
||||
P: Sonic Zhang
|
||||
M: sonic.zhang@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org/
|
||||
S: Supported
|
||||
F: drivers/i2c/busses/i2c-bfin-twi.c
|
||||
|
|
@ -1431,6 +1433,14 @@ P: Russell King
|
|||
M: linux@arm.linux.org.uk
|
||||
F: include/linux/clk.h
|
||||
|
||||
CISCO FCOE HBA DRIVER
|
||||
P: Abhijeet Joglekar
|
||||
M: abjoglek@cisco.com
|
||||
P: Joe Eykholt
|
||||
M: jeykholt@cisco.com
|
||||
L: linux-scsi@vger.kernel.org
|
||||
S: Supported
|
||||
|
||||
CODA FILE SYSTEM
|
||||
P: Jan Harkes
|
||||
M: jaharkes@cs.cmu.edu
|
||||
|
|
@ -1532,6 +1542,13 @@ W: http://www.fi.muni.cz/~kas/cosa/
|
|||
S: Maintained
|
||||
F: drivers/net/wan/cosa*
|
||||
|
||||
CPMAC ETHERNET DRIVER
|
||||
P: Florian Fainelli
|
||||
M: florian@openwrt.org
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/cpmac.c
|
||||
|
||||
CPU FREQUENCY DRIVERS
|
||||
P: Dave Jones
|
||||
M: davej@redhat.com
|
||||
|
|
@ -1963,8 +1980,8 @@ F: include/linux/edac.h
|
|||
|
||||
EDAC-E752X
|
||||
P: Mark Gross
|
||||
P: Doug Thompson
|
||||
M: mark.gross@intel.com
|
||||
P: Doug Thompson
|
||||
M: dougthompson@xmission.com
|
||||
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
|
||||
W: bluesmoke.sourceforge.net
|
||||
|
|
@ -2241,7 +2258,7 @@ P: Li Yang
|
|||
M: leoli@freescale.com
|
||||
P: Zhang Wei
|
||||
M: zw@zh-kernel.org
|
||||
L: linuxppc-embedded@ozlabs.org
|
||||
L: linuxppc-dev@ozlabs.org
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/dma/fsldma.*
|
||||
|
|
@ -5579,6 +5596,14 @@ M: ian@mnementh.co.uk
|
|||
S: Maintained
|
||||
F: drivers/mmc/host/tmio_mmc.*
|
||||
|
||||
TMPFS (SHMEM FILESYSTEM)
|
||||
P: Hugh Dickins
|
||||
M: hugh.dickins@tiscali.co.uk
|
||||
L: linux-mm@kvack.org
|
||||
S: Maintained
|
||||
F: include/linux/shmem_fs.h
|
||||
F: mm/shmem.c
|
||||
|
||||
TPM DEVICE DRIVER
|
||||
P: Debora Velarde
|
||||
M: debora@linux.vnet.ibm.com
|
||||
|
|
|
|||
6
Makefile
6
Makefile
|
|
@ -1,8 +1,8 @@
|
|||
VERSION = 2
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 30
|
||||
EXTRAVERSION = -rc6
|
||||
NAME = Vindictive Armadillo
|
||||
EXTRAVERSION =
|
||||
NAME = Man-Eating Seals of Antiquity
|
||||
|
||||
# *DOCUMENTATION*
|
||||
# To see a list of typical targets execute "make help"
|
||||
|
|
@ -533,7 +533,7 @@ endif
|
|||
|
||||
include $(srctree)/arch/$(SRCARCH)/Makefile
|
||||
|
||||
ifneq (CONFIG_FRAME_WARN,0)
|
||||
ifneq ($(CONFIG_FRAME_WARN),0)
|
||||
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
|
|||
}
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&dp264_irq_lock);
|
||||
cpu_set_irq_affinity(irq, *affinity);
|
||||
tsunami_update_irq_hw(cached_irq_mask);
|
||||
spin_unlock(&dp264_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&dp264_irq_lock);
|
||||
cpu_set_irq_affinity(irq - 16, *affinity);
|
||||
tsunami_update_irq_hw(cached_irq_mask);
|
||||
spin_unlock(&dp264_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct hw_interrupt_type dp264_irq_type = {
|
||||
|
|
|
|||
|
|
@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
|
|||
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&titan_irq_lock);
|
||||
titan_cpu_set_irq_affinity(irq - 16, *affinity);
|
||||
titan_update_irq_hw(titan_cached_irq_mask);
|
||||
spin_unlock(&titan_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
|
|
|
|||
|
|
@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
||||
static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
||||
{
|
||||
void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
|
||||
unsigned int shift = (irq % 4) * 8;
|
||||
|
|
@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
|||
val |= 1 << (cpu + shift);
|
||||
writel(val, reg);
|
||||
spin_unlock(&irq_controller_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -114,3 +114,16 @@
|
|||
.align 3; \
|
||||
.long 9999b,9001f; \
|
||||
.previous
|
||||
|
||||
/*
|
||||
* SMP data memory barrier
|
||||
*/
|
||||
.macro smp_dmb
|
||||
#ifdef CONFIG_SMP
|
||||
#if __LINUX_ARM_ARCH__ >= 7
|
||||
dmb
|
||||
#elif __LINUX_ARM_ARCH__ == 6
|
||||
mcr p15, 0, r0, c7, c10, 5 @ dmb
|
||||
#endif
|
||||
#endif
|
||||
.endm
|
||||
|
|
|
|||
|
|
@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
|
|||
: "cc");
|
||||
}
|
||||
|
||||
static inline void atomic_add(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
__asm__ __volatile__("@ atomic_add\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" add %0, %0, %3\n"
|
||||
" strex %1, %0, [%2]\n"
|
||||
" teq %1, #0\n"
|
||||
" bne 1b"
|
||||
: "=&r" (result), "=&r" (tmp)
|
||||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
}
|
||||
|
||||
static inline int atomic_add_return(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
smp_mb();
|
||||
|
||||
__asm__ __volatile__("@ atomic_add_return\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" add %0, %0, %3\n"
|
||||
|
|
@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
|
|||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
|
||||
smp_mb();
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
static inline void atomic_sub(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
__asm__ __volatile__("@ atomic_sub\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" sub %0, %0, %3\n"
|
||||
" strex %1, %0, [%2]\n"
|
||||
" teq %1, #0\n"
|
||||
" bne 1b"
|
||||
: "=&r" (result), "=&r" (tmp)
|
||||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
}
|
||||
|
||||
static inline int atomic_sub_return(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
smp_mb();
|
||||
|
||||
__asm__ __volatile__("@ atomic_sub_return\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" sub %0, %0, %3\n"
|
||||
|
|
@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
|
|||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
|
||||
smp_mb();
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
|
|
@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
|
|||
{
|
||||
unsigned long oldval, res;
|
||||
|
||||
smp_mb();
|
||||
|
||||
do {
|
||||
__asm__ __volatile__("@ atomic_cmpxchg\n"
|
||||
"ldrex %1, [%2]\n"
|
||||
|
|
@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
|
|||
: "cc");
|
||||
} while (res);
|
||||
|
||||
smp_mb();
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
|
|
@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
|
|||
|
||||
return val;
|
||||
}
|
||||
#define atomic_add(i, v) (void) atomic_add_return(i, v)
|
||||
|
||||
static inline int atomic_sub_return(int i, atomic_t *v)
|
||||
{
|
||||
|
|
@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
|
|||
|
||||
return val;
|
||||
}
|
||||
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
|
||||
|
||||
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
|
||||
{
|
||||
|
|
@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
|
|||
}
|
||||
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
|
||||
|
||||
#define atomic_add(i, v) (void) atomic_add_return(i, v)
|
||||
#define atomic_inc(v) (void) atomic_add_return(1, v)
|
||||
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
|
||||
#define atomic_dec(v) (void) atomic_sub_return(1, v)
|
||||
#define atomic_inc(v) atomic_add(1, v)
|
||||
#define atomic_dec(v) atomic_sub(1, v)
|
||||
|
||||
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
|
||||
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
|
||||
|
|
@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
|
|||
|
||||
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
|
||||
|
||||
/* Atomic operations are already serializing on ARM */
|
||||
#define smp_mb__before_atomic_dec() barrier()
|
||||
#define smp_mb__after_atomic_dec() barrier()
|
||||
#define smp_mb__before_atomic_inc() barrier()
|
||||
#define smp_mb__after_atomic_inc() barrier()
|
||||
#define smp_mb__before_atomic_dec() smp_mb()
|
||||
#define smp_mb__after_atomic_dec() smp_mb()
|
||||
#define smp_mb__before_atomic_inc() smp_mb()
|
||||
#define smp_mb__after_atomic_inc() smp_mb()
|
||||
|
||||
#include <asm-generic/atomic.h>
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -7,4 +7,20 @@
|
|||
#define L1_CACHE_SHIFT 5
|
||||
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
|
||||
|
||||
/*
|
||||
* Memory returned by kmalloc() may be used for DMA, so we must make
|
||||
* sure that all such allocations are cache aligned. Otherwise,
|
||||
* unrelated code may cause parts of the buffer to be read into the
|
||||
* cache before the transfer is done, causing old data to be seen by
|
||||
* the CPU.
|
||||
*/
|
||||
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
|
||||
|
||||
/*
|
||||
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
|
||||
*/
|
||||
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
|
||||
#define ARCH_SLAB_MINALIGN 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,9 +5,6 @@
|
|||
#ifndef __ARM_FLAT_H__
|
||||
#define __ARM_FLAT_H__
|
||||
|
||||
/* An odd number of words will be pushed after this alignment, so
|
||||
deliberately misalign the value. */
|
||||
#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
|
||||
#define flat_argvp_envp_on_stack() 1
|
||||
#define flat_old_ram_flag(flags) (flags)
|
||||
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
|
||||
|
|
|
|||
|
|
@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
|
|||
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
|
||||
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
|
||||
|
||||
/*
|
||||
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
|
||||
*/
|
||||
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
|
||||
#define ARCH_SLAB_MINALIGN 8
|
||||
#endif
|
||||
|
||||
#include <asm-generic/page.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
|
|||
unsigned int tmp;
|
||||
#endif
|
||||
|
||||
smp_mb();
|
||||
|
||||
switch (size) {
|
||||
#if __LINUX_ARM_ARCH__ >= 6
|
||||
case 1:
|
||||
|
|
@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
|
|||
__bad_xchg(ptr, size), ret = 0;
|
||||
break;
|
||||
}
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -316,6 +319,12 @@ extern void enable_hlt(void);
|
|||
|
||||
#include <asm-generic/cmpxchg-local.h>
|
||||
|
||||
#if __LINUX_ARM_ARCH__ < 6
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
#error "SMP is not supported on this platform"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
|
||||
* them available.
|
||||
|
|
@ -329,6 +338,173 @@ extern void enable_hlt(void);
|
|||
#include <asm-generic/cmpxchg.h>
|
||||
#endif
|
||||
|
||||
#else /* __LINUX_ARM_ARCH__ >= 6 */
|
||||
|
||||
extern void __bad_cmpxchg(volatile void *ptr, int size);
|
||||
|
||||
/*
|
||||
* cmpxchg only support 32-bits operands on ARMv6.
|
||||
*/
|
||||
|
||||
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long oldval, res;
|
||||
|
||||
switch (size) {
|
||||
#ifdef CONFIG_CPU_32v6K
|
||||
case 1:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg1\n"
|
||||
" ldrexb %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexbeq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
case 2:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg1\n"
|
||||
" ldrexh %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexheq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
#endif /* CONFIG_CPU_32v6K */
|
||||
case 4:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg4\n"
|
||||
" ldrex %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexeq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
default:
|
||||
__bad_cmpxchg(ptr, size);
|
||||
oldval = 0;
|
||||
}
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
smp_mb();
|
||||
ret = __cmpxchg(ptr, old, new, size);
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
|
||||
(unsigned long)(o), \
|
||||
(unsigned long)(n), \
|
||||
sizeof(*(ptr))))
|
||||
|
||||
static inline unsigned long __cmpxchg_local(volatile void *ptr,
|
||||
unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
switch (size) {
|
||||
#ifndef CONFIG_CPU_32v6K
|
||||
case 1:
|
||||
case 2:
|
||||
ret = __cmpxchg_local_generic(ptr, old, new, size);
|
||||
break;
|
||||
#endif /* !CONFIG_CPU_32v6K */
|
||||
default:
|
||||
ret = __cmpxchg(ptr, old, new, size);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg_local(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
|
||||
(unsigned long)(o), \
|
||||
(unsigned long)(n), \
|
||||
sizeof(*(ptr))))
|
||||
|
||||
#ifdef CONFIG_CPU_32v6K
|
||||
|
||||
/*
|
||||
* Note : ARMv7-M (currently unsupported by Linux) does not support
|
||||
* ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
|
||||
* not be allowed to use __cmpxchg64.
|
||||
*/
|
||||
static inline unsigned long long __cmpxchg64(volatile void *ptr,
|
||||
unsigned long long old,
|
||||
unsigned long long new)
|
||||
{
|
||||
register unsigned long long oldval asm("r0");
|
||||
register unsigned long long __old asm("r2") = old;
|
||||
register unsigned long long __new asm("r4") = new;
|
||||
unsigned long res;
|
||||
|
||||
do {
|
||||
asm volatile(
|
||||
" @ __cmpxchg8\n"
|
||||
" ldrexd %1, %H1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" teqeq %H1, %H3\n"
|
||||
" strexdeq %0, %4, %H4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (__old), "r" (__new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
|
||||
unsigned long long old,
|
||||
unsigned long long new)
|
||||
{
|
||||
unsigned long long ret;
|
||||
|
||||
smp_mb();
|
||||
ret = __cmpxchg64(ptr, old, new);
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg64(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
|
||||
(unsigned long long)(o), \
|
||||
(unsigned long long)(n)))
|
||||
|
||||
#define cmpxchg64_local(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg64((ptr), \
|
||||
(unsigned long long)(o), \
|
||||
(unsigned long long)(n)))
|
||||
|
||||
#else /* !CONFIG_CPU_32v6K */
|
||||
|
||||
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
|
||||
|
||||
#endif /* CONFIG_CPU_32v6K */
|
||||
|
||||
#endif /* __LINUX_ARM_ARCH__ >= 6 */
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#define arch_align_stack(x) (x)
|
||||
|
|
|
|||
|
|
@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
|
|||
return 1;
|
||||
if (cpu_architecture() < CPU_ARCH_ARMv6)
|
||||
return 1;
|
||||
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
|
||||
/*
|
||||
* If we have support for OABI programs, we can never allow NX
|
||||
* support - our signal syscall restart mechanism relies upon
|
||||
* being able to execute code placed on the user stack.
|
||||
*/
|
||||
return 1;
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
EXPORT_SYMBOL(arm_elf_read_implies_exec);
|
||||
|
|
|
|||
|
|
@ -815,10 +815,7 @@ __kuser_helper_start:
|
|||
*/
|
||||
|
||||
__kuser_memory_barrier: @ 0xffff0fa0
|
||||
|
||||
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
|
||||
mcr p15, 0, r0, c7, c10, 5 @ dmb
|
||||
#endif
|
||||
smp_dmb
|
||||
usr_ret lr
|
||||
|
||||
.align 5
|
||||
|
|
|
|||
|
|
@ -18,12 +18,14 @@
|
|||
mov r2, #1
|
||||
add r1, r1, r0, lsr #3 @ Get byte offset
|
||||
mov r3, r2, lsl r3 @ create mask
|
||||
smp_dmb
|
||||
1: ldrexb r2, [r1]
|
||||
ands r0, r2, r3 @ save old value of bit
|
||||
\instr r2, r2, r3 @ toggle bit
|
||||
strexb ip, r2, [r1]
|
||||
cmp ip, #0
|
||||
bne 1b
|
||||
smp_dmb
|
||||
cmp r0, #0
|
||||
movne r0, #1
|
||||
2: mov pc, lr
|
||||
|
|
|
|||
|
|
@ -15,10 +15,9 @@
|
|||
/*
|
||||
* Memory Map definitions
|
||||
*/
|
||||
/* FIXME: Does it really swap SRAM like this? */
|
||||
#ifdef CONFIG_GEMINI_MEM_SWAP
|
||||
# define GEMINI_DRAM_BASE 0x00000000
|
||||
# define GEMINI_SRAM_BASE 0x20000000
|
||||
# define GEMINI_SRAM_BASE 0x70000000
|
||||
#else
|
||||
# define GEMINI_SRAM_BASE 0x00000000
|
||||
# define GEMINI_DRAM_BASE 0x10000000
|
||||
|
|
|
|||
|
|
@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = kirkwood_ge00_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = kirkwood_ge01_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -386,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
|
|||
|
||||
static struct resource kirkwood_i2c_resources[] = {
|
||||
{
|
||||
.name = "i2c",
|
||||
.start = I2C_PHYS_BASE,
|
||||
.end = I2C_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c",
|
||||
.start = IRQ_KIRKWOOD_TWSI,
|
||||
.end = IRQ_KIRKWOOD_TWSI,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
|
|||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP4_SATA1_ACTn,
|
||||
MPP5_SATA0_ACTn,
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
|
|
@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
|
|||
MPP14_UART1_RXD, /* PIC controller */
|
||||
MPP15_GPIO, /* USB Copy button */
|
||||
MPP16_GPIO, /* Reset button */
|
||||
MPP20_SATA1_ACTn,
|
||||
MPP21_SATA0_ACTn,
|
||||
MPP22_SATA1_PRESENTn,
|
||||
MPP23_SATA0_PRESENTn,
|
||||
0
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = loki_ge0_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = loki_ge1_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
|
|||
|
|
@ -3,6 +3,11 @@
|
|||
|
||||
#include <mach/mfp.h>
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x1 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x2 << 13)
|
||||
#define MFP_DRIVE_FAST (0x3 << 13)
|
||||
|
||||
/* GPIO */
|
||||
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
|
||||
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
|
||||
|
|
|
|||
|
|
@ -3,6 +3,11 @@
|
|||
|
||||
#include <mach/mfp.h>
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x2 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x4 << 13)
|
||||
#define MFP_DRIVE_FAST (0x8 << 13)
|
||||
|
||||
/* UART2 */
|
||||
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
|
||||
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
|
||||
|
|
|
|||
|
|
@ -12,16 +12,13 @@
|
|||
* possible, we make the following compromise:
|
||||
*
|
||||
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
|
||||
* 2. DRIVE strength definitions redefined to include the reserved bit10
|
||||
* 2. DRIVE strength definitions redefined to include the reserved bit
|
||||
* - the reserved bit differs between pxa168 and pxa910, and the
|
||||
* MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
|
||||
* 3. Override MFP_CFG() and MFP_CFG_DRV()
|
||||
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
|
||||
*/
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x2 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x4 << 13)
|
||||
#define MFP_DRIVE_FAST (0x8 << 13)
|
||||
|
||||
#undef MFP_CFG
|
||||
#undef MFP_CFG_DRV
|
||||
#undef MFP_CFG_LPM
|
||||
|
|
|
|||
|
|
@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
|
|||
.set_mode = timer_set_mode,
|
||||
};
|
||||
|
||||
static cycle_t clksrc_read(void)
|
||||
static cycle_t clksrc_read(struct clocksource *cs)
|
||||
{
|
||||
return timer_read();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge00_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge01_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
|
|||
.id = 2,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge10_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
|
|||
.id = 3,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge11_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
|
|||
|
||||
static struct resource mv78xx0_i2c_0_resources[] = {
|
||||
{
|
||||
.name = "i2c 0 base",
|
||||
.start = I2C_0_PHYS_BASE,
|
||||
.end = I2C_0_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c 0 irq",
|
||||
.start = IRQ_MV78XX0_I2C_0,
|
||||
.end = IRQ_MV78XX0_I2C_0,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
|
|||
|
||||
static struct resource mv78xx0_i2c_1_resources[] = {
|
||||
{
|
||||
.name = "i2c 1 base",
|
||||
.start = I2C_1_PHYS_BASE,
|
||||
.end = I2C_1_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c 1 irq",
|
||||
.start = IRQ_MV78XX0_I2C_1,
|
||||
.end = IRQ_MV78XX0_I2C_1,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -890,7 +890,7 @@ static struct clk clko_clk = {
|
|||
.con_id = n, \
|
||||
.clk = &c, \
|
||||
},
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
/* It's unlikely that any driver wants one of them directly:
|
||||
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
|
||||
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
|
||||
|
|
|
|||
|
|
@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
|
||||
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
|
||||
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
|
||||
|
|
|
|||
|
|
@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
|
||||
_REGISTER_CLOCK(NULL, "ata", ata_clk)
|
||||
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
|
||||
|
|
|
|||
|
|
@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK(NULL, "emi", emi_clk)
|
||||
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
|
||||
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
|
||||
|
|
|
|||
|
|
@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = orion5x_eth_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
|
|||
|
||||
static struct resource orion5x_i2c_resources[] = {
|
||||
{
|
||||
.name = "i2c base",
|
||||
.start = I2C_PHYS_BASE,
|
||||
.end = I2C_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c irq",
|
||||
.start = IRQ_ORION5X_I2C,
|
||||
.end = IRQ_ORION5X_I2C,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
|
|||
}
|
||||
|
||||
|
||||
static struct pxa2xx_udc_mach_info pxa_udc_info;
|
||||
static struct pxa2xx_udc_mach_info pxa_udc_info = {
|
||||
.gpio_pullup = -1,
|
||||
.gpio_vbus = -1,
|
||||
};
|
||||
|
||||
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
|
|||
GPIO25_SSP1_TXD,
|
||||
GPIO26_SSP1_RXD,
|
||||
GPIO24_GPIO, /* pcap chip select */
|
||||
GPIO1_GPIO, /* pcap interrupt */
|
||||
GPIO4_GPIO, /* WDI_AP */
|
||||
GPIO55_GPIO, /* SYS_RESTART */
|
||||
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
|
||||
GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
|
||||
GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
|
||||
|
||||
/* MMC */
|
||||
GPIO32_MMC_CLK,
|
||||
|
|
@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
|
|||
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
|
||||
static unsigned long gen1_pin_config[] __initdata = {
|
||||
/* flip / lockswitch */
|
||||
GPIO12_GPIO,
|
||||
GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* bluetooth (bcm2035) */
|
||||
GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
|
||||
GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
|
||||
GPIO48_GPIO, /* RESET */
|
||||
GPIO28_GPIO, /* WAKEUP */
|
||||
|
||||
/* Neptune handshake */
|
||||
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
|
||||
GPIO57_GPIO, /* AP_RDY */
|
||||
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
|
||||
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
|
||||
GPIO82_GPIO, /* RESET */
|
||||
GPIO99_GPIO, /* TC_MM_EN */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
|
||||
GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
|
||||
GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
|
||||
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
|
||||
GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
|
||||
GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
|
||||
|
||||
/* sound */
|
||||
GPIO52_SSP3_SCLK,
|
||||
|
|
@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
|
|||
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
|
||||
static unsigned long gen2_pin_config[] __initdata = {
|
||||
/* flip / lockswitch */
|
||||
GPIO15_GPIO,
|
||||
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* EOC */
|
||||
GPIO10_GPIO,
|
||||
GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
|
||||
/* bluetooth (bcm2045) */
|
||||
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
|
||||
GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
|
||||
GPIO37_GPIO, /* RESET */
|
||||
GPIO57_GPIO, /* WAKEUP */
|
||||
|
||||
/* Neptune handshake */
|
||||
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
|
||||
GPIO96_GPIO, /* AP_RDY */
|
||||
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
|
||||
GPIO116_GPIO, /* RESET */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
|
||||
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
|
||||
GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
|
||||
GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
|
||||
GPIO41_GPIO, /* BP_FLASH */
|
||||
|
||||
/* sound */
|
||||
|
|
|
|||
|
|
@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
|
|||
*/
|
||||
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
|
||||
{ /* UCAM sensor board */
|
||||
.type = "max1238",
|
||||
.type = "max1239",
|
||||
.addr = 0x35,
|
||||
}, { /* ITS400 Sensor board only */
|
||||
.type = "max1363",
|
||||
|
|
|
|||
|
|
@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
|
|||
/**
|
||||
* init_gpio_reset() - register GPIO as reset generator
|
||||
* @gpio: gpio nr
|
||||
* @output: set gpio as out/low instead of input during normal work
|
||||
* @output: set gpio as output instead of input during normal work
|
||||
* @level: output level
|
||||
*/
|
||||
extern int init_gpio_reset(int gpio, int output);
|
||||
extern int init_gpio_reset(int gpio, int output, int level);
|
||||
|
||||
#endif /* __ASM_ARCH_RESET_H */
|
||||
|
|
|
|||
|
|
@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
|
|||
#ifdef CONFIG_PM
|
||||
static unsigned long saved_gafr[2][4];
|
||||
static unsigned long saved_gpdr[4];
|
||||
static unsigned long saved_pgsr[4];
|
||||
|
||||
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
||||
{
|
||||
|
|
@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
|||
saved_gafr[0][i] = GAFR_L(i);
|
||||
saved_gafr[1][i] = GAFR_U(i);
|
||||
saved_gpdr[i] = GPDR(i * 32);
|
||||
saved_pgsr[i] = PGSR(i);
|
||||
|
||||
GPDR(i * 32) = gpdr_lpm[i];
|
||||
}
|
||||
|
|
@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
|
|||
GAFR_L(i) = saved_gafr[0][i];
|
||||
GAFR_U(i) = saved_gafr[1][i];
|
||||
GPDR(i * 32) = saved_gpdr[i];
|
||||
PGSR(i) = saved_pgsr[i];
|
||||
}
|
||||
PSSR = PSSR_RDH | PSSR_PH;
|
||||
return 0;
|
||||
|
|
@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
|
|||
if (cpu_is_pxa27x())
|
||||
pxa27x_mfp_init();
|
||||
|
||||
/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
|
||||
PSSR = PSSR_RDH;
|
||||
|
||||
/* initialize gafr_run[], pgsr_lpm[] from existing values */
|
||||
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
|
||||
gpdr_lpm[i] = GPDR(i * 32);
|
||||
|
|
|
|||
|
|
@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
GPIO108_GPIO, /* ir disable */
|
||||
|
|
|
|||
|
|
@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
|
|
|
|||
|
|
@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ static void do_hw_reset(void);
|
|||
|
||||
static int reset_gpio = -1;
|
||||
|
||||
int init_gpio_reset(int gpio, int output)
|
||||
int init_gpio_reset(int gpio, int output, int level)
|
||||
{
|
||||
int rc;
|
||||
|
||||
|
|
@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
|
|||
}
|
||||
|
||||
if (output)
|
||||
rc = gpio_direction_output(gpio, 0);
|
||||
rc = gpio_direction_output(gpio, level);
|
||||
else
|
||||
rc = gpio_direction_input(gpio);
|
||||
if (rc) {
|
||||
|
|
|
|||
|
|
@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
|
|||
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
|
||||
}
|
||||
|
||||
static void spitz_ohci_exit(struct device *dev)
|
||||
{
|
||||
gpio_free(SPITZ_GPIO_USB_HOST);
|
||||
}
|
||||
|
||||
static struct pxaohci_platform_data spitz_ohci_platform_data = {
|
||||
.port_mode = PMM_NPS_MODE,
|
||||
.init = spitz_ohci_init,
|
||||
.exit = spitz_ohci_exit,
|
||||
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
|
||||
.power_budget = 150,
|
||||
};
|
||||
|
|
@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
|
|||
|
||||
static void __init common_init(void)
|
||||
{
|
||||
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
|
||||
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
|
||||
pm_power_off = spitz_poweroff;
|
||||
arm_pm_restart = spitz_restart;
|
||||
|
||||
|
|
|
|||
|
|
@ -897,7 +897,7 @@ static void __init tosa_init(void)
|
|||
gpio_set_wake(MFP_PIN_GPIO1, 1);
|
||||
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
|
||||
|
||||
init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
|
||||
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
|
||||
|
||||
pm_power_off = tosa_poweroff;
|
||||
arm_pm_restart = tosa_restart;
|
||||
|
|
|
|||
|
|
@ -184,23 +184,37 @@ __v7_setup:
|
|||
stmia r12, {r0-r5, r7, r9, r11, lr}
|
||||
bl v7_flush_dcache_all
|
||||
ldmia r12, {r0-r5, r7, r9, r11, lr}
|
||||
|
||||
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
|
||||
and r10, r0, #0xff000000 @ ARM?
|
||||
teq r10, #0x41000000
|
||||
bne 2f
|
||||
and r5, r0, #0x00f00000 @ variant
|
||||
and r6, r0, #0x0000000f @ revision
|
||||
orr r0, r6, r5, lsr #20-4 @ combine variant and revision
|
||||
|
||||
#ifdef CONFIG_ARM_ERRATA_430973
|
||||
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orr r10, r10, #(1 << 6) @ set IBE to 1
|
||||
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
teq r5, #0x00100000 @ only present in r1p*
|
||||
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orreq r10, r10, #(1 << 6) @ set IBE to 1
|
||||
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
#endif
|
||||
#ifdef CONFIG_ARM_ERRATA_458693
|
||||
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orr r10, r10, #(1 << 5) @ set L1NEON to 1
|
||||
orr r10, r10, #(1 << 9) @ set PLDNOP to 1
|
||||
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
teq r0, #0x20 @ only present in r2p0
|
||||
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
|
||||
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
|
||||
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
#endif
|
||||
#ifdef CONFIG_ARM_ERRATA_460075
|
||||
mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
||||
orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
||||
mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
||||
teq r0, #0x20 @ only present in r2p0
|
||||
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
||||
tsteq r10, #1 << 22
|
||||
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
||||
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
||||
#endif
|
||||
mov r10, #0
|
||||
|
||||
2: mov r10, #0
|
||||
#ifdef HARVARD_CACHE
|
||||
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
#
|
||||
# http://www.arm.linux.org.uk/developer/machines/?action=new
|
||||
#
|
||||
# Last update: Mon Mar 23 20:09:01 2009
|
||||
# Last update: Fri May 29 10:14:20 2009
|
||||
#
|
||||
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
|
||||
#
|
||||
|
|
@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905
|
|||
apf9328 MACH_APF9328 APF9328 906
|
||||
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
|
||||
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
|
||||
palmt650 MACH_PALMT650 PALMT650 909
|
||||
treo650 MACH_TREO650 TREO650 909
|
||||
acumen MACH_ACUMEN ACUMEN 910
|
||||
xp100 MACH_XP100 XP100 911
|
||||
fs2410 MACH_FS2410 FS2410 912
|
||||
|
|
@ -1232,7 +1232,7 @@ ql202b MACH_QL202B QL202B 1226
|
|||
vpac270 MACH_VPAC270 VPAC270 1227
|
||||
rd129 MACH_RD129 RD129 1228
|
||||
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
|
||||
xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
|
||||
treo680 MACH_TREO680 TREO680 1230
|
||||
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
|
||||
zylonite MACH_ZYLONITE ZYLONITE 1233
|
||||
gene1270 MACH_GENE1270 GENE1270 1234
|
||||
|
|
@ -1418,10 +1418,10 @@ looxc550 MACH_LOOXC550 LOOXC550 1417
|
|||
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
|
||||
app3xx MACH_APP3XX APP3XX 1419
|
||||
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
|
||||
palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
|
||||
palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
|
||||
palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
|
||||
palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
|
||||
treo700p MACH_TREO700P TREO700P 1421
|
||||
treo700w MACH_TREO700W TREO700W 1422
|
||||
treo750 MACH_TREO750 TREO750 1423
|
||||
treo755p MACH_TREO755P TREO755P 1424
|
||||
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
|
||||
sarge MACH_SARGE SARGE 1426
|
||||
a696 MACH_A696 A696 1427
|
||||
|
|
@ -1721,7 +1721,7 @@ sapphire MACH_SAPPHIRE SAPPHIRE 1729
|
|||
csb637xo MACH_CSB637XO CSB637XO 1730
|
||||
evisiong MACH_EVISIONG EVISIONG 1731
|
||||
stmp37xx MACH_STMP37XX STMP37XX 1732
|
||||
stmp378x MACH_STMP38XX STMP38XX 1733
|
||||
stmp378x MACH_STMP378X STMP378X 1733
|
||||
tnt MACH_TNT TNT 1734
|
||||
tbxt MACH_TBXT TBXT 1735
|
||||
playmate MACH_PLAYMATE PLAYMATE 1736
|
||||
|
|
@ -1817,7 +1817,7 @@ smdkc100 MACH_SMDKC100 SMDKC100 1826
|
|||
tavorevb MACH_TAVOREVB TAVOREVB 1827
|
||||
saar MACH_SAAR SAAR 1828
|
||||
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
|
||||
at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
|
||||
at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
|
||||
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
|
||||
hit_b0 MACH_HIT_B0 HIT_B0 1832
|
||||
adx_rmu MACH_ADX_RMU ADX_RMU 1833
|
||||
|
|
@ -2132,3 +2132,116 @@ apollo MACH_APOLLO APOLLO 2141
|
|||
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
|
||||
spc300 MACH_SPC300 SPC300 2143
|
||||
eko MACH_EKO EKO 2144
|
||||
ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
|
||||
ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
|
||||
m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
|
||||
str9104nas MACH_STAR9104NAS STAR9104NAS 2148
|
||||
pca100 MACH_PCA100 PCA100 2149
|
||||
z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
|
||||
hipox MACH_HIPOX HIPOX 2151
|
||||
omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
|
||||
bm150r MACH_BM150R BM150R 2153
|
||||
tbone MACH_TBONE TBONE 2154
|
||||
merlin MACH_MERLIN MERLIN 2155
|
||||
falcon MACH_FALCON FALCON 2156
|
||||
davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
|
||||
s5p6440 MACH_S5P6440 S5P6440 2158
|
||||
at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
|
||||
omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
|
||||
lpc313x MACH_LPC313X LPC313X 2161
|
||||
magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
|
||||
magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
|
||||
magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
|
||||
meesc MACH_MEESC MEESC 2165
|
||||
otc570 MACH_OTC570 OTC570 2166
|
||||
bcu2412 MACH_BCU2412 BCU2412 2167
|
||||
beacon MACH_BEACON BEACON 2168
|
||||
actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
|
||||
e4430 MACH_E4430 E4430 2170
|
||||
ql300 MACH_QL300 QL300 2171
|
||||
btmavb101 MACH_BTMAVB101 BTMAVB101 2172
|
||||
btmawb101 MACH_BTMAWB101 BTMAWB101 2173
|
||||
sq201 MACH_SQ201 SQ201 2174
|
||||
quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
|
||||
openpad MACH_OPENPAD OPENPAD 2176
|
||||
tx25 MACH_TX25 TX25 2177
|
||||
omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
|
||||
htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
|
||||
lal43 MACH_LAL43 LAL43 2181
|
||||
htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
|
||||
anw6410 MACH_ANW6410 ANW6410 2183
|
||||
htcprophet MACH_HTCPROPHET HTCPROPHET 2185
|
||||
cfa_10022 MACH_CFA_10022 CFA_10022 2186
|
||||
imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
|
||||
px2imx27 MACH_PX2IMX27 PX2IMX27 2188
|
||||
stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
|
||||
dvs10 MACH_DVS10 DVS10 2190
|
||||
portuxg20 MACH_PORTUXG20 PORTUXG20 2191
|
||||
arm_spv MACH_ARM_SPV ARM_SPV 2192
|
||||
smdkc110 MACH_SMDKC110 SMDKC110 2193
|
||||
cabespresso MACH_CABESPRESSO CABESPRESSO 2194
|
||||
hmc800 MACH_HMC800 HMC800 2195
|
||||
sholes MACH_SHOLES SHOLES 2196
|
||||
btmxc31 MACH_BTMXC31 BTMXC31 2197
|
||||
dt501 MACH_DT501 DT501 2198
|
||||
ktx MACH_KTX KTX 2199
|
||||
omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
|
||||
netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
|
||||
netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
|
||||
d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
|
||||
net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
|
||||
net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
|
||||
net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
|
||||
endb2443 MACH_ENDB2443 ENDB2443 2207
|
||||
inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
|
||||
tros MACH_TROS TROS 2209
|
||||
pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
|
||||
ofsp8 MACH_OFSP8 OFSP8 2211
|
||||
at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
|
||||
guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
|
||||
eab1r MACH_EAB1R EAB1R 2214
|
||||
desirec MACH_DESIREC DESIREC 2215
|
||||
cordoba MACH_CORDOBA CORDOBA 2216
|
||||
irvine MACH_IRVINE IRVINE 2217
|
||||
sff772 MACH_SFF772 SFF772 2218
|
||||
pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
|
||||
pc7302 MACH_PC7302 PC7302 2220
|
||||
bip6000 MACH_BIP6000 BIP6000 2221
|
||||
silvermoon MACH_SILVERMOON SILVERMOON 2222
|
||||
vc0830 MACH_VC0830 VC0830 2223
|
||||
dt430 MACH_DT430 DT430 2224
|
||||
ji42pf MACH_JI42PF JI42PF 2225
|
||||
gnet_ksm MACH_GNET_KSM GNET_KSM 2226
|
||||
gnet_sgm MACH_GNET_SGM GNET_SGM 2227
|
||||
gnet_sgr MACH_GNET_SGR GNET_SGR 2228
|
||||
omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
|
||||
pnp MACH_PNP PNP 2230
|
||||
ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
|
||||
ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
|
||||
sas_c MACH_SAS_C SAS_C 2233
|
||||
vma2315 MACH_VMA2315 VMA2315 2234
|
||||
vcs MACH_VCS VCS 2235
|
||||
spear600 MACH_SPEAR600 SPEAR600 2236
|
||||
spear300 MACH_SPEAR300 SPEAR300 2237
|
||||
spear1300 MACH_SPEAR1300 SPEAR1300 2238
|
||||
lilly1131 MACH_LILLY1131 LILLY1131 2239
|
||||
arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
|
||||
mapphone MACH_MAPPHONE MAPPHONE 2241
|
||||
legend MACH_LEGEND LEGEND 2242
|
||||
salsa MACH_SALSA SALSA 2243
|
||||
lounge MACH_LOUNGE LOUNGE 2244
|
||||
vision MACH_VISION VISION 2245
|
||||
vmb20 MACH_VMB20 VMB20 2246
|
||||
hy2410 MACH_HY2410 HY2410 2247
|
||||
hy9315 MACH_HY9315 HY9315 2248
|
||||
bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
|
||||
arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
|
||||
vs_v210 MACH_VS_V210 VS_V210 2252
|
||||
vs_v212 MACH_VS_V212 VS_V212 2253
|
||||
hmt MACH_HMT HMT 2254
|
||||
suen3 MACH_SUEN3 SUEN3 2255
|
||||
vesper MACH_VESPER VESPER 2256
|
||||
str9 MACH_STR9 STR9 2257
|
||||
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
|
||||
simcom MACH_SIMCOM SIMCOM 2259
|
||||
mcwebio MACH_MCWEBIO MCWEBIO 2260
|
||||
|
|
|
|||
|
|
@ -1 +0,0 @@
|
|||
+mach
|
||||
|
|
@ -10,7 +10,6 @@
|
|||
|
||||
#include <asm/unaligned.h>
|
||||
|
||||
#define flat_stack_align(sp) /* nothing needed */
|
||||
#define flat_argvp_envp_on_stack() 0
|
||||
#define flat_old_ram_flag(flags) (flags)
|
||||
|
||||
|
|
|
|||
|
|
@ -378,8 +378,10 @@
|
|||
#define __NR_dup3 363
|
||||
#define __NR_pipe2 364
|
||||
#define __NR_inotify_init1 365
|
||||
#define __NR_preadv 366
|
||||
#define __NR_pwritev 367
|
||||
|
||||
#define __NR_syscall 366
|
||||
#define __NR_syscall 368
|
||||
#define NR_syscalls __NR_syscall
|
||||
|
||||
/* Old optional stuff no one actually uses */
|
||||
|
|
|
|||
|
|
@ -0,0 +1 @@
|
|||
vmlinux.lds
|
||||
|
|
@ -8,9 +8,8 @@
|
|||
|
||||
#define strncmp __inline_strncmp
|
||||
#include <asm/string.h>
|
||||
#undef strncmp
|
||||
|
||||
#include <linux/module.h>
|
||||
#undef strncmp
|
||||
|
||||
int strncmp(const char *cs, const char *ct, size_t count)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -1581,6 +1581,8 @@ ENTRY(_sys_call_table)
|
|||
.long _sys_dup3
|
||||
.long _sys_pipe2
|
||||
.long _sys_inotify_init1 /* 365 */
|
||||
.long _sys_preadv
|
||||
.long _sys_pwritev
|
||||
|
||||
.rept NR_syscalls-(.-_sys_call_table)/4
|
||||
.long _sys_ni_syscall
|
||||
|
|
|
|||
|
|
@ -325,12 +325,14 @@ static void end_crisv32_irq(unsigned int irq)
|
|||
{
|
||||
}
|
||||
|
||||
void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
|
||||
int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
unsigned long flags;
|
||||
spin_lock_irqsave(&irq_lock, flags);
|
||||
irq_allocations[irq - FIRST_IRQ].mask = *dest;
|
||||
spin_unlock_irqrestore(&irq_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct irq_chip crisv32_irq_type = {
|
||||
|
|
|
|||
|
|
@ -5,7 +5,6 @@
|
|||
#ifndef __H8300_FLAT_H__
|
||||
#define __H8300_FLAT_H__
|
||||
|
||||
#define flat_stack_align(sp) /* nothing needed */
|
||||
#define flat_argvp_envp_on_stack() 1
|
||||
#define flat_old_ram_flag(flags) 1
|
||||
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
|
||||
|
|
|
|||
|
|
@ -21,9 +21,10 @@ hpsim_irq_noop (unsigned int irq)
|
|||
{
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct hw_interrupt_type irq_type_hp_sim = {
|
||||
|
|
|
|||
|
|
@ -636,7 +636,7 @@ void __init acpi_numa_arch_fixup(void)
|
|||
* success: return IRQ number (>=0)
|
||||
* failure: return < 0
|
||||
*/
|
||||
int acpi_register_gsi(u32 gsi, int triggering, int polarity)
|
||||
int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
|
||||
{
|
||||
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
|
||||
return gsi;
|
||||
|
|
@ -678,7 +678,8 @@ static int __init acpi_parse_fadt(struct acpi_table_header *table)
|
|||
|
||||
fadt = (struct acpi_table_fadt *)fadt_header;
|
||||
|
||||
acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
|
||||
acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
|
||||
ACPI_ACTIVE_LOW);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -329,7 +329,7 @@ unmask_irq (unsigned int irq)
|
|||
}
|
||||
|
||||
|
||||
static void
|
||||
static int
|
||||
iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
{
|
||||
#ifdef CONFIG_SMP
|
||||
|
|
@ -343,15 +343,15 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
|
||||
cpu = cpumask_first_and(cpu_online_mask, mask);
|
||||
if (cpu >= nr_cpu_ids)
|
||||
return;
|
||||
return -1;
|
||||
|
||||
if (irq_prepare_move(irq, cpu))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
dest = cpu_physical_id(cpu);
|
||||
|
||||
if (!iosapic_intr_info[irq].count)
|
||||
return; /* not an IOSAPIC interrupt */
|
||||
return -1; /* not an IOSAPIC interrupt */
|
||||
|
||||
set_irq_affinity_info(irq, dest, redir);
|
||||
|
||||
|
|
@ -376,7 +376,9 @@ iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
|
||||
iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
|
||||
}
|
||||
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -12,7 +12,7 @@
|
|||
static struct irq_chip ia64_msi_chip;
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void ia64_set_msi_irq_affinity(unsigned int irq,
|
||||
static int ia64_set_msi_irq_affinity(unsigned int irq,
|
||||
const cpumask_t *cpu_mask)
|
||||
{
|
||||
struct msi_msg msg;
|
||||
|
|
@ -20,10 +20,10 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
|
|||
int cpu = first_cpu(*cpu_mask);
|
||||
|
||||
if (!cpu_online(cpu))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
if (irq_prepare_move(irq, cpu))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
read_msi_msg(irq, &msg);
|
||||
|
||||
|
|
@ -39,6 +39,8 @@ static void ia64_set_msi_irq_affinity(unsigned int irq,
|
|||
|
||||
write_msi_msg(irq, &msg);
|
||||
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_SMP */
|
||||
|
||||
|
|
@ -130,17 +132,17 @@ void arch_teardown_msi_irq(unsigned int irq)
|
|||
|
||||
#ifdef CONFIG_DMAR
|
||||
#ifdef CONFIG_SMP
|
||||
static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
{
|
||||
struct irq_cfg *cfg = irq_cfg + irq;
|
||||
struct msi_msg msg;
|
||||
int cpu = cpumask_first(mask);
|
||||
|
||||
if (!cpu_online(cpu))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
if (irq_prepare_move(irq, cpu))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
dmar_msi_read(irq, &msg);
|
||||
|
||||
|
|
@ -151,6 +153,8 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
|
||||
dmar_msi_write(irq, &msg);
|
||||
cpumask_copy(irq_desc[irq].affinity, mask);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_SMP */
|
||||
|
||||
|
|
|
|||
|
|
@ -227,7 +227,7 @@ finish_up:
|
|||
return new_irq_info;
|
||||
}
|
||||
|
||||
static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
|
||||
static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
|
||||
{
|
||||
struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
|
||||
nasid_t nasid;
|
||||
|
|
@ -239,6 +239,8 @@ static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
|
|||
list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
|
||||
sn_irq_lh[irq], list)
|
||||
(void)sn_retarget_vector(sn_irq_info, nasid, slice);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
|
|
|
|||
|
|
@ -151,7 +151,7 @@ int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void sn_set_msi_irq_affinity(unsigned int irq,
|
||||
static int sn_set_msi_irq_affinity(unsigned int irq,
|
||||
const struct cpumask *cpu_mask)
|
||||
{
|
||||
struct msi_msg msg;
|
||||
|
|
@ -168,7 +168,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
|
|||
cpu = cpumask_first(cpu_mask);
|
||||
sn_irq_info = sn_msi_info[irq].sn_irq_info;
|
||||
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
|
||||
return;
|
||||
return -1;
|
||||
|
||||
/*
|
||||
* Release XIO resources for the old MSI PCI address
|
||||
|
|
@ -189,7 +189,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
|
|||
new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
|
||||
sn_msi_info[irq].sn_irq_info = new_irq_info;
|
||||
if (new_irq_info == NULL)
|
||||
return;
|
||||
return -1;
|
||||
|
||||
/*
|
||||
* Map the xio address into bus space
|
||||
|
|
@ -206,6 +206,8 @@ static void sn_set_msi_irq_affinity(unsigned int irq,
|
|||
|
||||
write_msi_msg(irq, &msg);
|
||||
cpumask_copy(irq_desc[irq].affinity, cpu_mask);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_SMP */
|
||||
|
||||
|
|
|
|||
|
|
@ -12,7 +12,6 @@
|
|||
#ifndef __ASM_M32R_FLAT_H
|
||||
#define __ASM_M32R_FLAT_H
|
||||
|
||||
#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
|
||||
#define flat_argvp_envp_on_stack() 0
|
||||
#define flat_old_ram_flag(flags) (flags)
|
||||
#define flat_set_persistent(relval, p) 0
|
||||
|
|
|
|||
|
|
@ -5,7 +5,6 @@
|
|||
#ifndef __M68KNOMMU_FLAT_H__
|
||||
#define __M68KNOMMU_FLAT_H__
|
||||
|
||||
#define flat_stack_align(sp) /* nothing needed */
|
||||
#define flat_argvp_envp_on_stack() 1
|
||||
#define flat_old_ram_flag(flags) (flags)
|
||||
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
|
||||
|
|
|
|||
|
|
@ -72,6 +72,7 @@ config MIPS_COBALT
|
|||
select IRQ_CPU
|
||||
select IRQ_GT641XX
|
||||
select PCI_GT64XXX_PCI0
|
||||
select PCI
|
||||
select SYS_HAS_CPU_NEVADA
|
||||
select SYS_HAS_EARLY_PRINTK
|
||||
select SYS_SUPPORTS_32BIT_KERNEL
|
||||
|
|
@ -593,7 +594,7 @@ config WR_PPMC
|
|||
board, which is based on GT64120 bridge chip.
|
||||
|
||||
config CAVIUM_OCTEON_SIMULATOR
|
||||
bool "Support for the Cavium Networks Octeon Simulator"
|
||||
bool "Cavium Networks Octeon Simulator"
|
||||
select CEVT_R4K
|
||||
select 64BIT_PHYS_ADDR
|
||||
select DMA_COHERENT
|
||||
|
|
@ -607,7 +608,7 @@ config CAVIUM_OCTEON_SIMULATOR
|
|||
hardware.
|
||||
|
||||
config CAVIUM_OCTEON_REFERENCE_BOARD
|
||||
bool "Support for the Cavium Networks Octeon reference board"
|
||||
bool "Cavium Networks Octeon reference board"
|
||||
select CEVT_R4K
|
||||
select 64BIT_PHYS_ADDR
|
||||
select DMA_COHERENT
|
||||
|
|
|
|||
|
|
@ -177,7 +177,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
int cpu;
|
||||
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
|
||||
|
|
@ -199,6 +199,8 @@ static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask
|
|||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
|
||||
write_unlock(&octeon_irq_ciu0_rwlock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
@ -292,7 +294,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
int cpu;
|
||||
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
|
||||
|
|
@ -315,6 +317,8 @@ static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask
|
|||
*/
|
||||
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
|
||||
write_unlock(&octeon_irq_ciu1_rwlock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -39,8 +39,8 @@ struct cache_desc {
|
|||
#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
|
||||
|
||||
struct cpuinfo_mips {
|
||||
unsigned long udelay_val;
|
||||
unsigned long asid_cache;
|
||||
unsigned int udelay_val;
|
||||
unsigned int asid_cache;
|
||||
|
||||
/*
|
||||
* Capability and feature descriptor structure for MIPS CPU
|
||||
|
|
|
|||
|
|
@ -11,94 +11,12 @@
|
|||
#ifndef _ASM_DELAY_H
|
||||
#define _ASM_DELAY_H
|
||||
|
||||
#include <linux/param.h>
|
||||
#include <linux/smp.h>
|
||||
extern void __delay(unsigned int loops);
|
||||
extern void __ndelay(unsigned int ns);
|
||||
extern void __udelay(unsigned int us);
|
||||
|
||||
#include <asm/compiler.h>
|
||||
#include <asm/war.h>
|
||||
|
||||
static inline void __delay(unsigned long loops)
|
||||
{
|
||||
if (sizeof(long) == 4)
|
||||
__asm__ __volatile__ (
|
||||
" .set noreorder \n"
|
||||
" .align 3 \n"
|
||||
"1: bnez %0, 1b \n"
|
||||
" subu %0, 1 \n"
|
||||
" .set reorder \n"
|
||||
: "=r" (loops)
|
||||
: "0" (loops));
|
||||
else if (sizeof(long) == 8 && !DADDI_WAR)
|
||||
__asm__ __volatile__ (
|
||||
" .set noreorder \n"
|
||||
" .align 3 \n"
|
||||
"1: bnez %0, 1b \n"
|
||||
" dsubu %0, 1 \n"
|
||||
" .set reorder \n"
|
||||
: "=r" (loops)
|
||||
: "0" (loops));
|
||||
else if (sizeof(long) == 8 && DADDI_WAR)
|
||||
__asm__ __volatile__ (
|
||||
" .set noreorder \n"
|
||||
" .align 3 \n"
|
||||
"1: bnez %0, 1b \n"
|
||||
" dsubu %0, %2 \n"
|
||||
" .set reorder \n"
|
||||
: "=r" (loops)
|
||||
: "0" (loops), "r" (1));
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* Division by multiplication: you don't have to worry about
|
||||
* loss of precision.
|
||||
*
|
||||
* Use only for very small delays ( < 1 msec). Should probably use a
|
||||
* lookup table, really, as the multiplications take much too long with
|
||||
* short delays. This is a "reasonable" implementation, though (and the
|
||||
* first constant multiplications gets optimized away if the delay is
|
||||
* a constant)
|
||||
*/
|
||||
|
||||
static inline void __udelay(unsigned long usecs, unsigned long lpj)
|
||||
{
|
||||
unsigned long hi, lo;
|
||||
|
||||
/*
|
||||
* The rates of 128 is rounded wrongly by the catchall case
|
||||
* for 64-bit. Excessive precission? Probably ...
|
||||
*/
|
||||
#if defined(CONFIG_64BIT) && (HZ == 128)
|
||||
usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
|
||||
#elif defined(CONFIG_64BIT)
|
||||
usecs *= (0x8000000000000000UL / (500000 / HZ));
|
||||
#else /* 32-bit junk follows here */
|
||||
usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
|
||||
0x80000000ULL) >> 32);
|
||||
#endif
|
||||
|
||||
if (sizeof(long) == 4)
|
||||
__asm__("multu\t%2, %3"
|
||||
: "=h" (usecs), "=l" (lo)
|
||||
: "r" (usecs), "r" (lpj)
|
||||
: GCC_REG_ACCUM);
|
||||
else if (sizeof(long) == 8 && !R4000_WAR)
|
||||
__asm__("dmultu\t%2, %3"
|
||||
: "=h" (usecs), "=l" (lo)
|
||||
: "r" (usecs), "r" (lpj)
|
||||
: GCC_REG_ACCUM);
|
||||
else if (sizeof(long) == 8 && R4000_WAR)
|
||||
__asm__("dmultu\t%3, %4\n\tmfhi\t%0"
|
||||
: "=r" (usecs), "=h" (hi), "=l" (lo)
|
||||
: "r" (usecs), "r" (lpj)
|
||||
: GCC_REG_ACCUM);
|
||||
|
||||
__delay(usecs);
|
||||
}
|
||||
|
||||
#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
|
||||
|
||||
#define udelay(usecs) __udelay((usecs), __udelay_val)
|
||||
#define ndelay(ns) __udelay(ns)
|
||||
#define udelay(us) __udelay(us)
|
||||
|
||||
/* make sure "usecs *= ..." in udelay do not overflow. */
|
||||
#if HZ >= 1000
|
||||
|
|
|
|||
|
|
@ -60,12 +60,16 @@
|
|||
((nr) << _IOC_NRSHIFT) | \
|
||||
((size) << _IOC_SIZESHIFT))
|
||||
|
||||
#ifdef __KERNEL__
|
||||
/* provoke compile error for invalid uses of size argument */
|
||||
extern unsigned int __invalid_size_argument_for_IOC;
|
||||
#define _IOC_TYPECHECK(t) \
|
||||
((sizeof(t) == sizeof(t[1]) && \
|
||||
sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
|
||||
sizeof(t) : __invalid_size_argument_for_IOC)
|
||||
#else
|
||||
#define _IOC_TYPECHECK(t) (sizeof(t))
|
||||
#endif
|
||||
|
||||
/* used to create numbers */
|
||||
#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0)
|
||||
|
|
|
|||
|
|
@ -49,7 +49,7 @@ static inline void smtc_im_ack_irq(unsigned int irq)
|
|||
#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
|
||||
#include <linux/cpumask.h>
|
||||
|
||||
extern void plat_set_irq_affinity(unsigned int irq,
|
||||
extern int plat_set_irq_affinity(unsigned int irq,
|
||||
const struct cpumask *affinity);
|
||||
extern void smtc_forward_irq(unsigned int irq);
|
||||
|
||||
|
|
|
|||
|
|
@ -956,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
|
|||
void __user * __cl_addr = (addr); \
|
||||
unsigned long __cl_size = (n); \
|
||||
if (__cl_size && access_ok(VERIFY_WRITE, \
|
||||
((unsigned long)(__cl_addr)), __cl_size)) \
|
||||
__cl_addr, __cl_size)) \
|
||||
__cl_size = __clear_user(__cl_addr, __cl_size); \
|
||||
__cl_size; \
|
||||
})
|
||||
|
|
|
|||
|
|
@ -155,7 +155,7 @@ static void gic_unmask_irq(unsigned int irq)
|
|||
|
||||
static DEFINE_SPINLOCK(gic_lock);
|
||||
|
||||
static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
|
||||
static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
|
||||
{
|
||||
cpumask_t tmp = CPU_MASK_NONE;
|
||||
unsigned long flags;
|
||||
|
|
@ -166,7 +166,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
|
|||
|
||||
cpumask_and(&tmp, cpumask, cpu_online_mask);
|
||||
if (cpus_empty(tmp))
|
||||
return;
|
||||
return -1;
|
||||
|
||||
/* Assumption : cpumask refers to a single CPU */
|
||||
spin_lock_irqsave(&gic_lock, flags);
|
||||
|
|
@ -190,6 +190,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
|
|||
cpumask_copy(irq_desc[irq].affinity, cpumask);
|
||||
spin_unlock_irqrestore(&gic_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -42,7 +42,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
|
|||
seq_printf(m, fmt, __cpu_name[n],
|
||||
(version >> 4) & 0x0f, version & 0x0f,
|
||||
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
|
||||
seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
|
||||
seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
|
||||
cpu_data[n].udelay_val / (500000/HZ),
|
||||
(cpu_data[n].udelay_val / (5000/HZ)) % 100);
|
||||
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
|
||||
|
|
|
|||
|
|
@ -2,8 +2,8 @@
|
|||
# Makefile for MIPS-specific library files..
|
||||
#
|
||||
|
||||
lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
|
||||
strncpy_user.o strnlen_user.o uncached.o
|
||||
lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
|
||||
strlen_user.o strncpy_user.o strnlen_user.o uncached.o
|
||||
|
||||
obj-y += iomap.o
|
||||
obj-$(CONFIG_PCI) += iomap-pci.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,56 @@
|
|||
/*
|
||||
* This file is subject to the terms and conditions of the GNU General Public
|
||||
* License. See the file "COPYING" in the main directory of this archive
|
||||
* for more details.
|
||||
*
|
||||
* Copyright (C) 1994 by Waldorf Electronics
|
||||
* Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
|
||||
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
|
||||
* Copyright (C) 2007 Maciej W. Rozycki
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/param.h>
|
||||
#include <linux/smp.h>
|
||||
|
||||
#include <asm/compiler.h>
|
||||
#include <asm/war.h>
|
||||
|
||||
inline void __delay(unsigned int loops)
|
||||
{
|
||||
__asm__ __volatile__ (
|
||||
" .set noreorder \n"
|
||||
" .align 3 \n"
|
||||
"1: bnez %0, 1b \n"
|
||||
" subu %0, 1 \n"
|
||||
" .set reorder \n"
|
||||
: "=r" (loops)
|
||||
: "0" (loops));
|
||||
}
|
||||
EXPORT_SYMBOL(__delay);
|
||||
|
||||
/*
|
||||
* Division by multiplication: you don't have to worry about
|
||||
* loss of precision.
|
||||
*
|
||||
* Use only for very small delays ( < 1 msec). Should probably use a
|
||||
* lookup table, really, as the multiplications take much too long with
|
||||
* short delays. This is a "reasonable" implementation, though (and the
|
||||
* first constant multiplications gets optimized away if the delay is
|
||||
* a constant)
|
||||
*/
|
||||
|
||||
void __udelay(unsigned long us)
|
||||
{
|
||||
unsigned int lpj = current_cpu_data.udelay_val;
|
||||
|
||||
__delay((us * 0x000010c7 * HZ * lpj) >> 32);
|
||||
}
|
||||
EXPORT_SYMBOL(__udelay);
|
||||
|
||||
void __ndelay(unsigned long ns)
|
||||
{
|
||||
unsigned int lpj = current_cpu_data.udelay_val;
|
||||
|
||||
__delay((us * 0x00000005 * HZ * lpj) >> 32);
|
||||
}
|
||||
EXPORT_SYMBOL(__ndelay);
|
||||
|
|
@ -114,7 +114,7 @@ struct plat_smp_ops msmtc_smp_ops = {
|
|||
*/
|
||||
|
||||
|
||||
void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
cpumask_t tmask;
|
||||
int cpu = 0;
|
||||
|
|
@ -156,5 +156,7 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
|
|||
|
||||
/* Do any generic SMTC IRQ affinity setup */
|
||||
smtc_set_irq_affinity(irq, tmask);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
|
||||
|
|
|
|||
|
|
@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void)
|
|||
|
||||
static void ip32_machine_power_off(void)
|
||||
{
|
||||
volatile unsigned char reg_a, xctrl_a, xctrl_b;
|
||||
unsigned char reg_a, xctrl_a, xctrl_b;
|
||||
|
||||
disable_irq(MACEISA_RTC_IRQ);
|
||||
reg_a = CMOS_READ(RTC_REG_A);
|
||||
|
|
@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data)
|
|||
|
||||
static void debounce(unsigned long data)
|
||||
{
|
||||
volatile unsigned char reg_a, reg_c, xctrl_a;
|
||||
unsigned char reg_a, reg_c, xctrl_a;
|
||||
|
||||
reg_c = CMOS_READ(RTC_INTR_FLAGS);
|
||||
reg_a = CMOS_READ(RTC_REG_A);
|
||||
CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
|
||||
wbflush();
|
||||
xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
|
||||
|
|
@ -137,7 +138,7 @@ static inline void ip32_power_button(void)
|
|||
|
||||
static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
|
||||
{
|
||||
volatile unsigned char reg_c;
|
||||
unsigned char reg_c;
|
||||
|
||||
reg_c = CMOS_READ(RTC_INTR_FLAGS);
|
||||
if (!(reg_c & RTC_IRQF)) {
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ static void enable_bcm1480_irq(unsigned int irq);
|
|||
static void disable_bcm1480_irq(unsigned int irq);
|
||||
static void ack_bcm1480_irq(unsigned int irq);
|
||||
#ifdef CONFIG_SMP
|
||||
static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
|
||||
static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_PCI
|
||||
|
|
@ -109,7 +109,7 @@ void bcm1480_unmask_irq(int cpu, int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
{
|
||||
int i = 0, old_cpu, cpu, int_on, k;
|
||||
u64 cur_ints;
|
||||
|
|
@ -118,7 +118,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
|
||||
if (cpumask_weight(mask) != 1) {
|
||||
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
|
||||
return;
|
||||
return -1;
|
||||
}
|
||||
i = cpumask_first(mask);
|
||||
|
||||
|
|
@ -152,6 +152,8 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
}
|
||||
}
|
||||
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -288,13 +288,7 @@ void __init prom_init(void)
|
|||
*/
|
||||
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
|
||||
if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
|
||||
if (argc < 0) {
|
||||
/*
|
||||
* It's OK for direct boot to not provide a
|
||||
* command line
|
||||
*/
|
||||
strcpy(arcs_cmdline, "root=/dev/ram0 ");
|
||||
} else {
|
||||
if (argc >= 0) {
|
||||
/* The loader should have set the command line */
|
||||
/* too early for panic to do any good */
|
||||
printk("LINUX_CMDLINE not defined in cfe.");
|
||||
|
|
|
|||
|
|
@ -50,7 +50,7 @@ static void enable_sb1250_irq(unsigned int irq);
|
|||
static void disable_sb1250_irq(unsigned int irq);
|
||||
static void ack_sb1250_irq(unsigned int irq);
|
||||
#ifdef CONFIG_SMP
|
||||
static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
|
||||
static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SIBYTE_HAS_LDT
|
||||
|
|
@ -103,7 +103,7 @@ void sb1250_unmask_irq(int cpu, int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
|
||||
{
|
||||
int i = 0, old_cpu, cpu, int_on;
|
||||
u64 cur_ints;
|
||||
|
|
@ -113,7 +113,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
|
||||
if (cpumask_weight(mask) > 1) {
|
||||
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
|
||||
return;
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Convert logical CPU to physical CPU */
|
||||
|
|
@ -143,6 +143,8 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
|
|||
R_IMR_INTERRUPT_MASK));
|
||||
}
|
||||
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -130,15 +130,17 @@ int cpu_check_affinity(unsigned int irq, const struct cpumask *dest)
|
|||
return cpu_dest;
|
||||
}
|
||||
|
||||
static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
|
||||
static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
|
||||
{
|
||||
int cpu_dest;
|
||||
|
||||
cpu_dest = cpu_check_affinity(irq, dest);
|
||||
if (cpu_dest < 0)
|
||||
return;
|
||||
return -1;
|
||||
|
||||
cpumask_copy(&irq_desc[irq].affinity, dest);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -868,6 +868,18 @@ config TASK_SIZE
|
|||
default "0x80000000" if PPC_PREP || PPC_8xx
|
||||
default "0xc0000000"
|
||||
|
||||
config CONSISTENT_SIZE_BOOL
|
||||
bool "Set custom consistent memory pool size"
|
||||
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
|
||||
help
|
||||
This option allows you to set the size of the
|
||||
consistent memory pool. This pool of virtual memory
|
||||
is used to make consistent memory allocations.
|
||||
|
||||
config CONSISTENT_SIZE
|
||||
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
|
||||
default "0x00200000" if NOT_COHERENT_CACHE
|
||||
|
||||
config PIN_TLB
|
||||
bool "Pinned Kernel TLBs (860 ONLY)"
|
||||
depends on ADVANCED_OPTIONS && 8xx
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#
|
||||
# Automatically generated make config: don't edit
|
||||
# Linux kernel version: 2.6.28-rc3
|
||||
# Tue Nov 11 19:36:51 2008
|
||||
# Linux kernel version: 2.6.30-rc7
|
||||
# Mon May 25 14:53:25 2009
|
||||
#
|
||||
# CONFIG_PPC64 is not set
|
||||
|
||||
|
|
@ -14,6 +14,7 @@ CONFIG_6xx=y
|
|||
# CONFIG_40x is not set
|
||||
# CONFIG_44x is not set
|
||||
# CONFIG_E200 is not set
|
||||
CONFIG_PPC_BOOK3S=y
|
||||
CONFIG_PPC_FPU=y
|
||||
CONFIG_ALTIVEC=y
|
||||
CONFIG_PPC_STD_MMU=y
|
||||
|
|
@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
|
|||
CONFIG_PPC=y
|
||||
CONFIG_EARLY_PRINTK=y
|
||||
CONFIG_GENERIC_NVRAM=y
|
||||
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
|
||||
CONFIG_SCHED_OMIT_FRAME_POINTER=y
|
||||
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
|
||||
CONFIG_PPC_OF=y
|
||||
CONFIG_OF=y
|
||||
|
|
@ -52,12 +53,14 @@ CONFIG_OF=y
|
|||
CONFIG_AUDIT_ARCH=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
CONFIG_DTC=y
|
||||
# CONFIG_DEFAULT_UIMAGE is not set
|
||||
CONFIG_HIBERNATE_32=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_PPC_DCR_NATIVE is not set
|
||||
# CONFIG_PPC_DCR_MMIO is not set
|
||||
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
|
||||
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
|
||||
|
||||
#
|
||||
|
|
@ -72,14 +75,24 @@ CONFIG_SWAP=y
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_SYSVIPC_SYSCTL=y
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_POSIX_MQUEUE_SYSCTL=y
|
||||
# CONFIG_BSD_PROCESS_ACCT is not set
|
||||
# CONFIG_TASKSTATS is not set
|
||||
# CONFIG_AUDIT is not set
|
||||
|
||||
#
|
||||
# RCU Subsystem
|
||||
#
|
||||
CONFIG_CLASSIC_RCU=y
|
||||
# CONFIG_TREE_RCU is not set
|
||||
# CONFIG_PREEMPT_RCU is not set
|
||||
# CONFIG_TREE_RCU_TRACE is not set
|
||||
# CONFIG_PREEMPT_RCU_TRACE is not set
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=14
|
||||
# CONFIG_CGROUPS is not set
|
||||
# CONFIG_GROUP_SCHED is not set
|
||||
# CONFIG_CGROUPS is not set
|
||||
CONFIG_SYSFS_DEPRECATED=y
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
# CONFIG_RELAY is not set
|
||||
|
|
@ -88,23 +101,27 @@ CONFIG_NAMESPACES=y
|
|||
# CONFIG_IPC_NS is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_PID_NS is not set
|
||||
# CONFIG_NET_NS is not set
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_RD_GZIP=y
|
||||
CONFIG_RD_BZIP2=y
|
||||
CONFIG_RD_LZMA=y
|
||||
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
|
||||
CONFIG_SYSCTL=y
|
||||
CONFIG_ANON_INODES=y
|
||||
# CONFIG_EMBEDDED is not set
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
# CONFIG_KALLSYMS_EXTRA_PASS is not set
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_HOTPLUG=y
|
||||
CONFIG_PRINTK=y
|
||||
CONFIG_BUG=y
|
||||
CONFIG_ELF_CORE=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
CONFIG_BASE_FULL=y
|
||||
CONFIG_FUTEX=y
|
||||
CONFIG_ANON_INODES=y
|
||||
CONFIG_EPOLL=y
|
||||
CONFIG_SIGNALFD=y
|
||||
CONFIG_TIMERFD=y
|
||||
|
|
@ -114,10 +131,12 @@ CONFIG_AIO=y
|
|||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_PCI_QUIRKS=y
|
||||
CONFIG_SLUB_DEBUG=y
|
||||
# CONFIG_COMPAT_BRK is not set
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLUB=y
|
||||
# CONFIG_SLOB is not set
|
||||
CONFIG_PROFILING=y
|
||||
CONFIG_TRACEPOINTS=y
|
||||
# CONFIG_MARKERS is not set
|
||||
CONFIG_OPROFILE=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
|
|
@ -127,10 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
|
|||
CONFIG_HAVE_KPROBES=y
|
||||
CONFIG_HAVE_KRETPROBES=y
|
||||
CONFIG_HAVE_ARCH_TRACEHOOK=y
|
||||
# CONFIG_SLOW_WORK is not set
|
||||
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
|
||||
CONFIG_SLABINFO=y
|
||||
CONFIG_RT_MUTEXES=y
|
||||
# CONFIG_TINY_SHMEM is not set
|
||||
CONFIG_BASE_SMALL=0
|
||||
CONFIG_MODULES=y
|
||||
# CONFIG_MODULE_FORCE_LOAD is not set
|
||||
|
|
@ -138,11 +157,8 @@ CONFIG_MODULE_UNLOAD=y
|
|||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
# CONFIG_MODVERSIONS is not set
|
||||
# CONFIG_MODULE_SRCVERSION_ALL is not set
|
||||
CONFIG_KMOD=y
|
||||
CONFIG_BLOCK=y
|
||||
CONFIG_LBD=y
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
CONFIG_LSF=y
|
||||
CONFIG_BLK_DEV_BSG=y
|
||||
# CONFIG_BLK_DEV_INTEGRITY is not set
|
||||
|
||||
|
|
@ -158,14 +174,11 @@ CONFIG_DEFAULT_AS=y
|
|||
# CONFIG_DEFAULT_CFQ is not set
|
||||
# CONFIG_DEFAULT_NOOP is not set
|
||||
CONFIG_DEFAULT_IOSCHED="anticipatory"
|
||||
CONFIG_CLASSIC_RCU=y
|
||||
CONFIG_FREEZER=y
|
||||
|
||||
#
|
||||
# Platform support
|
||||
#
|
||||
CONFIG_PPC_MULTIPLATFORM=y
|
||||
CONFIG_CLASSIC32=y
|
||||
# CONFIG_PPC_CHRP is not set
|
||||
# CONFIG_MPC5121_ADS is not set
|
||||
# CONFIG_MPC5121_GENERIC is not set
|
||||
|
|
@ -178,7 +191,9 @@ CONFIG_PPC_PMAC=y
|
|||
# CONFIG_PPC_83xx is not set
|
||||
# CONFIG_PPC_86xx is not set
|
||||
# CONFIG_EMBEDDED6xx is not set
|
||||
# CONFIG_AMIGAONE is not set
|
||||
CONFIG_PPC_NATIVE=y
|
||||
CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
|
||||
# CONFIG_IPIC is not set
|
||||
CONFIG_MPIC=y
|
||||
# CONFIG_MPIC_WEIRD is not set
|
||||
|
|
@ -212,11 +227,12 @@ CONFIG_CPU_FREQ_PMAC=y
|
|||
CONFIG_PPC601_SYNC_FIX=y
|
||||
# CONFIG_TAU is not set
|
||||
# CONFIG_FSL_ULI1575 is not set
|
||||
# CONFIG_SIMPLE_GPIO is not set
|
||||
|
||||
#
|
||||
# Kernel options
|
||||
#
|
||||
# CONFIG_HIGHMEM is not set
|
||||
CONFIG_HIGHMEM=y
|
||||
CONFIG_TICK_ONESHOT=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_HIGH_RES_TIMERS=y
|
||||
|
|
@ -239,6 +255,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
|
|||
CONFIG_ARCH_HAS_WALK_MEMORY=y
|
||||
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
|
||||
# CONFIG_KEXEC is not set
|
||||
# CONFIG_CRASH_DUMP is not set
|
||||
CONFIG_ARCH_FLATMEM_ENABLE=y
|
||||
CONFIG_ARCH_POPULATES_NODE_MAP=y
|
||||
CONFIG_SELECT_MEMORY_MODEL=y
|
||||
|
|
@ -250,12 +267,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
|
|||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_SPLIT_PTLOCK_CPUS=4
|
||||
# CONFIG_MIGRATION is not set
|
||||
# CONFIG_RESOURCES_64BIT is not set
|
||||
# CONFIG_PHYS_ADDR_T_64BIT is not set
|
||||
CONFIG_ZONE_DMA_FLAG=1
|
||||
CONFIG_BOUNCE=y
|
||||
CONFIG_VIRT_TO_BUS=y
|
||||
CONFIG_UNEVICTABLE_LRU=y
|
||||
CONFIG_HAVE_MLOCK=y
|
||||
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
|
||||
CONFIG_PPC_4K_PAGES=y
|
||||
# CONFIG_PPC_16K_PAGES is not set
|
||||
# CONFIG_PPC_64K_PAGES is not set
|
||||
# CONFIG_PPC_256K_PAGES is not set
|
||||
CONFIG_FORCE_MAX_ZONEORDER=11
|
||||
CONFIG_PROC_DEVICETREE=y
|
||||
# CONFIG_CMDLINE_BOOL is not set
|
||||
|
|
@ -288,6 +310,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
|
|||
# CONFIG_PCI_MSI is not set
|
||||
# CONFIG_PCI_LEGACY is not set
|
||||
# CONFIG_PCI_DEBUG is not set
|
||||
# CONFIG_PCI_STUB is not set
|
||||
# CONFIG_PCI_IOV is not set
|
||||
CONFIG_PCCARD=m
|
||||
# CONFIG_PCMCIA_DEBUG is not set
|
||||
CONFIG_PCMCIA=m
|
||||
|
|
@ -397,6 +421,8 @@ CONFIG_NETFILTER_XTABLES=m
|
|||
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
|
||||
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
|
||||
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
|
||||
CONFIG_NETFILTER_XT_TARGET_HL=m
|
||||
# CONFIG_NETFILTER_XT_TARGET_LED is not set
|
||||
CONFIG_NETFILTER_XT_TARGET_MARK=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
|
||||
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
|
||||
|
|
@ -405,6 +431,7 @@ CONFIG_NETFILTER_XT_TARGET_RATEEST=m
|
|||
CONFIG_NETFILTER_XT_TARGET_TRACE=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
|
||||
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
|
||||
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
|
||||
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
|
||||
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
|
||||
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
|
||||
|
|
@ -415,6 +442,7 @@ CONFIG_NETFILTER_XT_MATCH_DSCP=m
|
|||
CONFIG_NETFILTER_XT_MATCH_ESP=m
|
||||
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
|
||||
CONFIG_NETFILTER_XT_MATCH_HELPER=m
|
||||
CONFIG_NETFILTER_XT_MATCH_HL=m
|
||||
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
|
||||
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
|
||||
|
|
@ -478,17 +506,15 @@ CONFIG_IP_NF_ARPFILTER=m
|
|||
CONFIG_IP_NF_ARP_MANGLE=m
|
||||
CONFIG_IP_DCCP=m
|
||||
CONFIG_INET_DCCP_DIAG=m
|
||||
CONFIG_IP_DCCP_ACKVEC=y
|
||||
|
||||
#
|
||||
# DCCP CCIDs Configuration (EXPERIMENTAL)
|
||||
#
|
||||
CONFIG_IP_DCCP_CCID2=m
|
||||
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
|
||||
CONFIG_IP_DCCP_CCID3=m
|
||||
CONFIG_IP_DCCP_CCID3=y
|
||||
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
|
||||
CONFIG_IP_DCCP_CCID3_RTO=100
|
||||
CONFIG_IP_DCCP_TFRC_LIB=m
|
||||
CONFIG_IP_DCCP_TFRC_LIB=y
|
||||
|
||||
#
|
||||
# DCCP Kernel Hacking
|
||||
|
|
@ -508,13 +534,16 @@ CONFIG_IP_DCCP_TFRC_LIB=m
|
|||
# CONFIG_LAPB is not set
|
||||
# CONFIG_ECONET is not set
|
||||
# CONFIG_WAN_ROUTER is not set
|
||||
# CONFIG_PHONET is not set
|
||||
# CONFIG_NET_SCHED is not set
|
||||
CONFIG_NET_CLS_ROUTE=y
|
||||
# CONFIG_DCB is not set
|
||||
|
||||
#
|
||||
# Network testing
|
||||
#
|
||||
# CONFIG_NET_PKTGEN is not set
|
||||
# CONFIG_NET_DROP_MONITOR is not set
|
||||
# CONFIG_HAMRADIO is not set
|
||||
# CONFIG_CAN is not set
|
||||
CONFIG_IRDA=m
|
||||
|
|
@ -577,8 +606,6 @@ CONFIG_BT_HIDP=m
|
|||
#
|
||||
# Bluetooth device drivers
|
||||
#
|
||||
CONFIG_BT_HCIUSB=m
|
||||
# CONFIG_BT_HCIUSB_SCO is not set
|
||||
# CONFIG_BT_HCIBTUSB is not set
|
||||
# CONFIG_BT_HCIUART is not set
|
||||
CONFIG_BT_HCIBCM203X=m
|
||||
|
|
@ -590,31 +617,27 @@ CONFIG_BT_HCIBFUSB=m
|
|||
# CONFIG_BT_HCIBTUART is not set
|
||||
# CONFIG_BT_HCIVHCI is not set
|
||||
# CONFIG_AF_RXRPC is not set
|
||||
# CONFIG_PHONET is not set
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_NL80211=y
|
||||
# CONFIG_CFG80211_REG_DEBUG is not set
|
||||
CONFIG_WIRELESS_OLD_REGULATORY=y
|
||||
CONFIG_WIRELESS_EXT=y
|
||||
CONFIG_WIRELESS_EXT_SYSFS=y
|
||||
# CONFIG_LIB80211 is not set
|
||||
CONFIG_MAC80211=m
|
||||
|
||||
#
|
||||
# Rate control algorithm selection
|
||||
#
|
||||
CONFIG_MAC80211_RC_PID=y
|
||||
# CONFIG_MAC80211_RC_MINSTREL is not set
|
||||
CONFIG_MAC80211_RC_DEFAULT_PID=y
|
||||
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
|
||||
CONFIG_MAC80211_RC_DEFAULT="pid"
|
||||
CONFIG_MAC80211_RC_MINSTREL=y
|
||||
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
|
||||
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
|
||||
CONFIG_MAC80211_RC_DEFAULT="minstrel"
|
||||
# CONFIG_MAC80211_MESH is not set
|
||||
CONFIG_MAC80211_LEDS=y
|
||||
# CONFIG_MAC80211_DEBUGFS is not set
|
||||
# CONFIG_MAC80211_DEBUG_MENU is not set
|
||||
CONFIG_IEEE80211=m
|
||||
# CONFIG_IEEE80211_DEBUG is not set
|
||||
CONFIG_IEEE80211_CRYPT_WEP=m
|
||||
CONFIG_IEEE80211_CRYPT_CCMP=m
|
||||
CONFIG_IEEE80211_CRYPT_TKIP=m
|
||||
# CONFIG_WIMAX is not set
|
||||
# CONFIG_RFKILL is not set
|
||||
# CONFIG_NET_9P is not set
|
||||
|
||||
|
|
@ -662,17 +685,27 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
|
|||
# CONFIG_BLK_DEV_HD is not set
|
||||
CONFIG_MISC_DEVICES=y
|
||||
# CONFIG_PHANTOM is not set
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
# CONFIG_SGI_IOC4 is not set
|
||||
# CONFIG_TIFM_CORE is not set
|
||||
# CONFIG_ICS932S401 is not set
|
||||
# CONFIG_ENCLOSURE_SERVICES is not set
|
||||
# CONFIG_HP_ILO is not set
|
||||
# CONFIG_ISL29003 is not set
|
||||
# CONFIG_C2PORT is not set
|
||||
|
||||
#
|
||||
# EEPROM support
|
||||
#
|
||||
# CONFIG_EEPROM_AT24 is not set
|
||||
# CONFIG_EEPROM_LEGACY is not set
|
||||
# CONFIG_EEPROM_93CX6 is not set
|
||||
CONFIG_HAVE_IDE=y
|
||||
CONFIG_IDE=y
|
||||
|
||||
#
|
||||
# Please see Documentation/ide/ide.txt for help/info on IDE drives
|
||||
#
|
||||
CONFIG_IDE_XFER_MODE=y
|
||||
CONFIG_IDE_TIMINGS=y
|
||||
CONFIG_IDE_ATAPI=y
|
||||
# CONFIG_BLK_DEV_IDE_SATA is not set
|
||||
|
|
@ -684,7 +717,6 @@ CONFIG_BLK_DEV_IDECS=m
|
|||
CONFIG_BLK_DEV_IDECD=y
|
||||
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
|
||||
# CONFIG_BLK_DEV_IDETAPE is not set
|
||||
CONFIG_BLK_DEV_IDESCSI=y
|
||||
# CONFIG_IDE_TASK_IOCTL is not set
|
||||
CONFIG_IDE_PROC_FS=y
|
||||
|
||||
|
|
@ -714,6 +746,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
|
|||
# CONFIG_BLK_DEV_JMICRON is not set
|
||||
# CONFIG_BLK_DEV_SC1200 is not set
|
||||
# CONFIG_BLK_DEV_PIIX is not set
|
||||
# CONFIG_BLK_DEV_IT8172 is not set
|
||||
# CONFIG_BLK_DEV_IT8213 is not set
|
||||
# CONFIG_BLK_DEV_IT821X is not set
|
||||
# CONFIG_BLK_DEV_NS87415 is not set
|
||||
|
|
@ -728,7 +761,6 @@ CONFIG_BLK_DEV_SL82C105=y
|
|||
# CONFIG_BLK_DEV_TC86C001 is not set
|
||||
CONFIG_BLK_DEV_IDE_PMAC=y
|
||||
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
|
||||
CONFIG_BLK_DEV_IDEDMA_PMAC=y
|
||||
CONFIG_BLK_DEV_IDEDMA=y
|
||||
|
||||
#
|
||||
|
|
@ -772,6 +804,7 @@ CONFIG_SCSI_FC_ATTRS=y
|
|||
# CONFIG_SCSI_SRP_ATTRS is not set
|
||||
CONFIG_SCSI_LOWLEVEL=y
|
||||
# CONFIG_ISCSI_TCP is not set
|
||||
# CONFIG_SCSI_CXGB3_ISCSI is not set
|
||||
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
|
||||
# CONFIG_SCSI_3W_9XXX is not set
|
||||
# CONFIG_SCSI_ACARD is not set
|
||||
|
|
@ -791,8 +824,12 @@ CONFIG_SCSI_AIC7XXX_OLD=m
|
|||
# CONFIG_MEGARAID_NEWGEN is not set
|
||||
# CONFIG_MEGARAID_LEGACY is not set
|
||||
# CONFIG_MEGARAID_SAS is not set
|
||||
# CONFIG_SCSI_MPT2SAS is not set
|
||||
# CONFIG_SCSI_HPTIOP is not set
|
||||
# CONFIG_SCSI_BUSLOGIC is not set
|
||||
# CONFIG_LIBFC is not set
|
||||
# CONFIG_LIBFCOE is not set
|
||||
# CONFIG_FCOE is not set
|
||||
# CONFIG_SCSI_DMX3191D is not set
|
||||
# CONFIG_SCSI_EATA is not set
|
||||
# CONFIG_SCSI_FUTURE_DOMAIN is not set
|
||||
|
|
@ -822,6 +859,7 @@ CONFIG_SCSI_MAC53C94=y
|
|||
# CONFIG_SCSI_SRP is not set
|
||||
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
|
||||
# CONFIG_SCSI_DH is not set
|
||||
# CONFIG_SCSI_OSD_INITIATOR is not set
|
||||
# CONFIG_ATA is not set
|
||||
CONFIG_MD=y
|
||||
CONFIG_BLK_DEV_MD=m
|
||||
|
|
@ -881,6 +919,7 @@ CONFIG_THERM_ADT746X=m
|
|||
# CONFIG_ANSLCD is not set
|
||||
CONFIG_PMAC_RACKMETER=m
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_COMPAT_NET_DEV_OPS=y
|
||||
CONFIG_DUMMY=m
|
||||
# CONFIG_BONDING is not set
|
||||
# CONFIG_MACVLAN is not set
|
||||
|
|
@ -898,6 +937,8 @@ CONFIG_BMAC=y
|
|||
CONFIG_SUNGEM=y
|
||||
# CONFIG_CASSINI is not set
|
||||
# CONFIG_NET_VENDOR_3COM is not set
|
||||
# CONFIG_ETHOC is not set
|
||||
# CONFIG_DNET is not set
|
||||
# CONFIG_NET_TULIP is not set
|
||||
# CONFIG_HP100 is not set
|
||||
# CONFIG_IBM_NEW_EMAC_ZMII is not set
|
||||
|
|
@ -913,7 +954,6 @@ CONFIG_PCNET32=y
|
|||
# CONFIG_ADAPTEC_STARFIRE is not set
|
||||
# CONFIG_B44 is not set
|
||||
# CONFIG_FORCEDETH is not set
|
||||
# CONFIG_EEPRO100 is not set
|
||||
# CONFIG_E100 is not set
|
||||
# CONFIG_FEALNX is not set
|
||||
# CONFIG_NATSEMI is not set
|
||||
|
|
@ -923,6 +963,7 @@ CONFIG_PCNET32=y
|
|||
# CONFIG_R6040 is not set
|
||||
# CONFIG_SIS900 is not set
|
||||
# CONFIG_EPIC100 is not set
|
||||
# CONFIG_SMSC9420 is not set
|
||||
# CONFIG_SUNDANCE is not set
|
||||
# CONFIG_TLAN is not set
|
||||
# CONFIG_VIA_RHINE is not set
|
||||
|
|
@ -935,6 +976,7 @@ CONFIG_NETDEV_1000=y
|
|||
# CONFIG_E1000E is not set
|
||||
# CONFIG_IP1000 is not set
|
||||
# CONFIG_IGB is not set
|
||||
# CONFIG_IGBVF is not set
|
||||
# CONFIG_NS83820 is not set
|
||||
# CONFIG_HAMACHI is not set
|
||||
# CONFIG_YELLOWFIN is not set
|
||||
|
|
@ -945,18 +987,20 @@ CONFIG_NETDEV_1000=y
|
|||
# CONFIG_VIA_VELOCITY is not set
|
||||
# CONFIG_TIGON3 is not set
|
||||
# CONFIG_BNX2 is not set
|
||||
# CONFIG_MV643XX_ETH is not set
|
||||
# CONFIG_QLA3XXX is not set
|
||||
# CONFIG_ATL1 is not set
|
||||
# CONFIG_ATL1E is not set
|
||||
# CONFIG_ATL1C is not set
|
||||
# CONFIG_JME is not set
|
||||
CONFIG_NETDEV_10000=y
|
||||
# CONFIG_CHELSIO_T1 is not set
|
||||
CONFIG_CHELSIO_T3_DEPENDS=y
|
||||
# CONFIG_CHELSIO_T3 is not set
|
||||
# CONFIG_ENIC is not set
|
||||
# CONFIG_IXGBE is not set
|
||||
# CONFIG_IXGB is not set
|
||||
# CONFIG_S2IO is not set
|
||||
# CONFIG_VXGE is not set
|
||||
# CONFIG_MYRI10GE is not set
|
||||
# CONFIG_NETXEN_NIC is not set
|
||||
# CONFIG_NIU is not set
|
||||
|
|
@ -966,6 +1010,7 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_BNX2X is not set
|
||||
# CONFIG_QLGE is not set
|
||||
# CONFIG_SFC is not set
|
||||
# CONFIG_BE2NET is not set
|
||||
# CONFIG_TR is not set
|
||||
|
||||
#
|
||||
|
|
@ -974,20 +1019,11 @@ CONFIG_NETDEV_10000=y
|
|||
# CONFIG_WLAN_PRE80211 is not set
|
||||
CONFIG_WLAN_80211=y
|
||||
# CONFIG_PCMCIA_RAYCS is not set
|
||||
# CONFIG_IPW2100 is not set
|
||||
# CONFIG_IPW2200 is not set
|
||||
# CONFIG_LIBERTAS is not set
|
||||
# CONFIG_LIBERTAS_THINFIRM is not set
|
||||
# CONFIG_AIRO is not set
|
||||
CONFIG_HERMES=m
|
||||
CONFIG_APPLE_AIRPORT=m
|
||||
# CONFIG_PLX_HERMES is not set
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_NORTEL_HERMES is not set
|
||||
CONFIG_PCI_HERMES=m
|
||||
CONFIG_PCMCIA_HERMES=m
|
||||
# CONFIG_PCMCIA_SPECTRUM is not set
|
||||
# CONFIG_ATMEL is not set
|
||||
# CONFIG_AT76C50X_USB is not set
|
||||
# CONFIG_AIRO_CS is not set
|
||||
# CONFIG_PCMCIA_WL3501 is not set
|
||||
CONFIG_PRISM54=m
|
||||
|
|
@ -997,15 +1033,17 @@ CONFIG_PRISM54=m
|
|||
# CONFIG_RTL8187 is not set
|
||||
# CONFIG_ADM8211 is not set
|
||||
# CONFIG_MAC80211_HWSIM is not set
|
||||
# CONFIG_MWL8K is not set
|
||||
CONFIG_P54_COMMON=m
|
||||
# CONFIG_P54_USB is not set
|
||||
# CONFIG_P54_PCI is not set
|
||||
CONFIG_P54_LEDS=y
|
||||
# CONFIG_ATH5K is not set
|
||||
# CONFIG_ATH9K is not set
|
||||
# CONFIG_IWLCORE is not set
|
||||
# CONFIG_IWLWIFI_LEDS is not set
|
||||
# CONFIG_IWLAGN is not set
|
||||
# CONFIG_IWL3945 is not set
|
||||
# CONFIG_AR9170_USB is not set
|
||||
# CONFIG_IPW2100 is not set
|
||||
# CONFIG_IPW2200 is not set
|
||||
# CONFIG_IWLWIFI is not set
|
||||
# CONFIG_HOSTAP is not set
|
||||
CONFIG_B43=m
|
||||
CONFIG_B43_PCI_AUTOSELECT=y
|
||||
|
|
@ -1025,6 +1063,19 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
|
|||
# CONFIG_B43LEGACY_PIO_MODE is not set
|
||||
# CONFIG_ZD1211RW is not set
|
||||
# CONFIG_RT2X00 is not set
|
||||
CONFIG_HERMES=m
|
||||
CONFIG_HERMES_CACHE_FW_ON_INIT=y
|
||||
CONFIG_APPLE_AIRPORT=m
|
||||
# CONFIG_PLX_HERMES is not set
|
||||
# CONFIG_TMD_HERMES is not set
|
||||
# CONFIG_NORTEL_HERMES is not set
|
||||
CONFIG_PCI_HERMES=m
|
||||
CONFIG_PCMCIA_HERMES=m
|
||||
# CONFIG_PCMCIA_SPECTRUM is not set
|
||||
|
||||
#
|
||||
# Enable WiMAX (Networking options) to see the WiMAX drivers
|
||||
#
|
||||
|
||||
#
|
||||
# USB Network Adapters
|
||||
|
|
@ -1036,6 +1087,7 @@ CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
|
|||
CONFIG_USB_USBNET=m
|
||||
CONFIG_USB_NET_AX8817X=m
|
||||
CONFIG_USB_NET_CDCETHER=m
|
||||
# CONFIG_USB_NET_CDC_EEM is not set
|
||||
# CONFIG_USB_NET_DM9601 is not set
|
||||
# CONFIG_USB_NET_SMSC95XX is not set
|
||||
# CONFIG_USB_NET_GL620A is not set
|
||||
|
|
@ -1099,7 +1151,7 @@ CONFIG_INPUT_KEYBOARD=y
|
|||
CONFIG_INPUT_MOUSE=y
|
||||
# CONFIG_MOUSE_PS2 is not set
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_APPLETOUCH is not set
|
||||
CONFIG_MOUSE_APPLETOUCH=y
|
||||
# CONFIG_MOUSE_BCM5974 is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
# CONFIG_INPUT_JOYSTICK is not set
|
||||
|
|
@ -1150,10 +1202,13 @@ CONFIG_SERIAL_PMACZILOG_TTYS=y
|
|||
# CONFIG_SERIAL_JSM is not set
|
||||
# CONFIG_SERIAL_OF_PLATFORM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
|
||||
CONFIG_LEGACY_PTYS=y
|
||||
CONFIG_LEGACY_PTY_COUNT=256
|
||||
# CONFIG_HVC_UDBG is not set
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
CONFIG_HW_RANDOM=m
|
||||
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
|
||||
CONFIG_NVRAM=y
|
||||
CONFIG_GEN_RTC=y
|
||||
# CONFIG_GEN_RTC_X is not set
|
||||
|
|
@ -1232,12 +1287,9 @@ CONFIG_I2C_POWERMAC=y
|
|||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_DS1682 is not set
|
||||
# CONFIG_EEPROM_AT24 is not set
|
||||
# CONFIG_EEPROM_LEGACY is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_PCF8575 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
|
|
@ -1259,11 +1311,11 @@ CONFIG_BATTERY_PMU=y
|
|||
# CONFIG_THERMAL is not set
|
||||
# CONFIG_THERMAL_HWMON is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
|
||||
#
|
||||
# Sonics Silicon Backplane
|
||||
#
|
||||
CONFIG_SSB_POSSIBLE=y
|
||||
CONFIG_SSB=m
|
||||
CONFIG_SSB_SPROM=y
|
||||
CONFIG_SSB_PCIHOST_POSSIBLE=y
|
||||
|
|
@ -1281,18 +1333,13 @@ CONFIG_SSB_DRIVER_PCICORE=y
|
|||
# CONFIG_MFD_CORE is not set
|
||||
# CONFIG_MFD_SM501 is not set
|
||||
# CONFIG_HTC_PASIC3 is not set
|
||||
# CONFIG_TWL4030_CORE is not set
|
||||
# CONFIG_MFD_TMIO is not set
|
||||
# CONFIG_PMIC_DA903X is not set
|
||||
# CONFIG_MFD_WM8400 is not set
|
||||
# CONFIG_MFD_WM8350_I2C is not set
|
||||
|
||||
#
|
||||
# Voltage and Current regulators
|
||||
#
|
||||
# CONFIG_MFD_PCF50633 is not set
|
||||
# CONFIG_REGULATOR is not set
|
||||
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
|
||||
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
|
||||
# CONFIG_REGULATOR_BQ24022 is not set
|
||||
|
||||
#
|
||||
# Multimedia devices
|
||||
|
|
@ -1390,6 +1437,7 @@ CONFIG_FB_ATY_BACKLIGHT=y
|
|||
# CONFIG_FB_KYRO is not set
|
||||
CONFIG_FB_3DFX=y
|
||||
# CONFIG_FB_3DFX_ACCEL is not set
|
||||
CONFIG_FB_3DFX_I2C=y
|
||||
# CONFIG_FB_VOODOO1 is not set
|
||||
# CONFIG_FB_VT8623 is not set
|
||||
# CONFIG_FB_TRIDENT is not set
|
||||
|
|
@ -1399,12 +1447,14 @@ CONFIG_FB_3DFX=y
|
|||
# CONFIG_FB_IBM_GXT4500 is not set
|
||||
# CONFIG_FB_VIRTUAL is not set
|
||||
# CONFIG_FB_METRONOME is not set
|
||||
# CONFIG_FB_MB862XX is not set
|
||||
# CONFIG_FB_BROADSHEET is not set
|
||||
CONFIG_BACKLIGHT_LCD_SUPPORT=y
|
||||
CONFIG_LCD_CLASS_DEVICE=m
|
||||
# CONFIG_LCD_ILI9320 is not set
|
||||
# CONFIG_LCD_PLATFORM is not set
|
||||
CONFIG_BACKLIGHT_CLASS_DEVICE=y
|
||||
# CONFIG_BACKLIGHT_CORGI is not set
|
||||
CONFIG_BACKLIGHT_GENERIC=y
|
||||
|
||||
#
|
||||
# Display device support
|
||||
|
|
@ -1444,11 +1494,13 @@ CONFIG_SND_MIXER_OSS=m
|
|||
CONFIG_SND_PCM_OSS=m
|
||||
CONFIG_SND_PCM_OSS_PLUGINS=y
|
||||
CONFIG_SND_SEQUENCER_OSS=y
|
||||
# CONFIG_SND_HRTIMER is not set
|
||||
# CONFIG_SND_DYNAMIC_MINORS is not set
|
||||
CONFIG_SND_SUPPORT_OLD_API=y
|
||||
CONFIG_SND_VERBOSE_PROCFS=y
|
||||
# CONFIG_SND_VERBOSE_PRINTK is not set
|
||||
# CONFIG_SND_DEBUG is not set
|
||||
CONFIG_SND_VMASTER=y
|
||||
CONFIG_SND_DRIVERS=y
|
||||
CONFIG_SND_DUMMY=m
|
||||
# CONFIG_SND_VIRMIDI is not set
|
||||
|
|
@ -1486,6 +1538,8 @@ CONFIG_SND_PCI=y
|
|||
# CONFIG_SND_INDIGO is not set
|
||||
# CONFIG_SND_INDIGOIO is not set
|
||||
# CONFIG_SND_INDIGODJ is not set
|
||||
# CONFIG_SND_INDIGOIOX is not set
|
||||
# CONFIG_SND_INDIGODJX is not set
|
||||
# CONFIG_SND_EMU10K1 is not set
|
||||
# CONFIG_SND_EMU10K1X is not set
|
||||
# CONFIG_SND_ENS1370 is not set
|
||||
|
|
@ -1551,28 +1605,31 @@ CONFIG_USB_HID=y
|
|||
#
|
||||
# Special HID drivers
|
||||
#
|
||||
CONFIG_HID_COMPAT=y
|
||||
CONFIG_HID_A4TECH=y
|
||||
CONFIG_HID_APPLE=y
|
||||
CONFIG_HID_BELKIN=y
|
||||
CONFIG_HID_BRIGHT=y
|
||||
CONFIG_HID_CHERRY=y
|
||||
CONFIG_HID_CHICONY=y
|
||||
CONFIG_HID_CYPRESS=y
|
||||
CONFIG_HID_DELL=y
|
||||
# CONFIG_DRAGONRISE_FF is not set
|
||||
CONFIG_HID_EZKEY=y
|
||||
CONFIG_HID_KYE=y
|
||||
CONFIG_HID_GYRATION=y
|
||||
CONFIG_HID_KENSINGTON=y
|
||||
CONFIG_HID_LOGITECH=y
|
||||
# CONFIG_LOGITECH_FF is not set
|
||||
# CONFIG_LOGIRUMBLEPAD2_FF is not set
|
||||
CONFIG_HID_MICROSOFT=y
|
||||
CONFIG_HID_MONTEREY=y
|
||||
CONFIG_HID_NTRIG=y
|
||||
CONFIG_HID_PANTHERLORD=y
|
||||
# CONFIG_PANTHERLORD_FF is not set
|
||||
CONFIG_HID_PETALYNX=y
|
||||
CONFIG_HID_SAMSUNG=y
|
||||
CONFIG_HID_SONY=y
|
||||
CONFIG_HID_SUNPLUS=y
|
||||
# CONFIG_GREENASIA_FF is not set
|
||||
CONFIG_HID_TOPSEED=y
|
||||
# CONFIG_THRUSTMASTER_FF is not set
|
||||
# CONFIG_ZEROPLUS_FF is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
|
|
@ -1603,6 +1660,7 @@ CONFIG_USB_EHCI_HCD=m
|
|||
CONFIG_USB_EHCI_ROOT_HUB_TT=y
|
||||
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
|
||||
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
|
||||
# CONFIG_USB_OXU210HP_HCD is not set
|
||||
# CONFIG_USB_ISP116X_HCD is not set
|
||||
# CONFIG_USB_ISP1760_HCD is not set
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
|
|
@ -1625,24 +1683,23 @@ CONFIG_USB_PRINTER=m
|
|||
# CONFIG_USB_TMC is not set
|
||||
|
||||
#
|
||||
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
|
||||
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
|
||||
#
|
||||
|
||||
#
|
||||
# may also be needed; see USB_STORAGE Help for more information
|
||||
# also be needed; see USB_STORAGE Help for more info
|
||||
#
|
||||
CONFIG_USB_STORAGE=m
|
||||
# CONFIG_USB_STORAGE_DEBUG is not set
|
||||
# CONFIG_USB_STORAGE_DATAFAB is not set
|
||||
# CONFIG_USB_STORAGE_FREECOM is not set
|
||||
# CONFIG_USB_STORAGE_ISD200 is not set
|
||||
# CONFIG_USB_STORAGE_DPCM is not set
|
||||
# CONFIG_USB_STORAGE_USBAT is not set
|
||||
# CONFIG_USB_STORAGE_SDDR09 is not set
|
||||
# CONFIG_USB_STORAGE_SDDR55 is not set
|
||||
# CONFIG_USB_STORAGE_JUMPSHOT is not set
|
||||
# CONFIG_USB_STORAGE_ALAUDA is not set
|
||||
CONFIG_USB_STORAGE_ONETOUCH=y
|
||||
CONFIG_USB_STORAGE_ONETOUCH=m
|
||||
# CONFIG_USB_STORAGE_KARMA is not set
|
||||
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
|
||||
# CONFIG_USB_LIBUSUAL is not set
|
||||
|
|
@ -1665,7 +1722,7 @@ CONFIG_USB_EZUSB=y
|
|||
# CONFIG_USB_SERIAL_CH341 is not set
|
||||
# CONFIG_USB_SERIAL_WHITEHEAT is not set
|
||||
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
|
||||
# CONFIG_USB_SERIAL_CP2101 is not set
|
||||
# CONFIG_USB_SERIAL_CP210X is not set
|
||||
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
|
||||
# CONFIG_USB_SERIAL_EMPEG is not set
|
||||
# CONFIG_USB_SERIAL_FTDI_SIO is not set
|
||||
|
|
@ -1701,15 +1758,19 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
|||
# CONFIG_USB_SERIAL_NAVMAN is not set
|
||||
# CONFIG_USB_SERIAL_PL2303 is not set
|
||||
# CONFIG_USB_SERIAL_OTI6858 is not set
|
||||
# CONFIG_USB_SERIAL_QUALCOMM is not set
|
||||
# CONFIG_USB_SERIAL_SPCP8X5 is not set
|
||||
# CONFIG_USB_SERIAL_HP4X is not set
|
||||
# CONFIG_USB_SERIAL_SAFE is not set
|
||||
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
|
||||
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
|
||||
# CONFIG_USB_SERIAL_SYMBOL is not set
|
||||
# CONFIG_USB_SERIAL_TI is not set
|
||||
# CONFIG_USB_SERIAL_CYBERJACK is not set
|
||||
# CONFIG_USB_SERIAL_XIRCOM is not set
|
||||
# CONFIG_USB_SERIAL_OPTION is not set
|
||||
# CONFIG_USB_SERIAL_OMNINET is not set
|
||||
# CONFIG_USB_SERIAL_OPTICON is not set
|
||||
# CONFIG_USB_SERIAL_DEBUG is not set
|
||||
|
||||
#
|
||||
|
|
@ -1726,7 +1787,6 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
|
|||
# CONFIG_USB_LED is not set
|
||||
# CONFIG_USB_CYPRESS_CY7C63 is not set
|
||||
# CONFIG_USB_CYTHERM is not set
|
||||
# CONFIG_USB_PHIDGET is not set
|
||||
# CONFIG_USB_IDMOUSE is not set
|
||||
# CONFIG_USB_FTDI_ELAN is not set
|
||||
CONFIG_USB_APPLEDISPLAY=m
|
||||
|
|
@ -1738,6 +1798,11 @@ CONFIG_USB_APPLEDISPLAY=m
|
|||
# CONFIG_USB_ISIGHTFW is not set
|
||||
# CONFIG_USB_VST is not set
|
||||
# CONFIG_USB_GADGET is not set
|
||||
|
||||
#
|
||||
# OTG and related infrastructure
|
||||
#
|
||||
# CONFIG_NOP_USB_XCEIV is not set
|
||||
# CONFIG_UWB is not set
|
||||
# CONFIG_MMC is not set
|
||||
# CONFIG_MEMSTICK is not set
|
||||
|
|
@ -1748,7 +1813,9 @@ CONFIG_LEDS_CLASS=y
|
|||
# LED drivers
|
||||
#
|
||||
# CONFIG_LEDS_PCA9532 is not set
|
||||
# CONFIG_LEDS_LP5521 is not set
|
||||
# CONFIG_LEDS_PCA955X is not set
|
||||
# CONFIG_LEDS_BD2802 is not set
|
||||
|
||||
#
|
||||
# LED Triggers
|
||||
|
|
@ -1759,11 +1826,16 @@ CONFIG_LEDS_TRIGGER_IDE_DISK=y
|
|||
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
|
||||
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
|
||||
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
|
||||
|
||||
#
|
||||
# iptables trigger is under Netfilter config (LED target)
|
||||
#
|
||||
# CONFIG_ACCESSIBILITY is not set
|
||||
# CONFIG_INFINIBAND is not set
|
||||
# CONFIG_EDAC is not set
|
||||
# CONFIG_RTC_CLASS is not set
|
||||
# CONFIG_DMADEVICES is not set
|
||||
# CONFIG_AUXDISPLAY is not set
|
||||
# CONFIG_UIO is not set
|
||||
# CONFIG_STAGING is not set
|
||||
|
||||
|
|
@ -1774,6 +1846,7 @@ CONFIG_EXT2_FS=y
|
|||
# CONFIG_EXT2_FS_XATTR is not set
|
||||
# CONFIG_EXT2_FS_XIP is not set
|
||||
CONFIG_EXT3_FS=y
|
||||
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
||||
CONFIG_EXT3_FS_XATTR=y
|
||||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
# CONFIG_EXT3_FS_SECURITY is not set
|
||||
|
|
@ -1783,7 +1856,9 @@ CONFIG_EXT4_FS_XATTR=y
|
|||
# CONFIG_EXT4_FS_POSIX_ACL is not set
|
||||
# CONFIG_EXT4_FS_SECURITY is not set
|
||||
CONFIG_JBD=y
|
||||
# CONFIG_JBD_DEBUG is not set
|
||||
CONFIG_JBD2=y
|
||||
# CONFIG_JBD2_DEBUG is not set
|
||||
CONFIG_FS_MBCACHE=y
|
||||
# CONFIG_REISERFS_FS is not set
|
||||
# CONFIG_JFS_FS is not set
|
||||
|
|
@ -1792,6 +1867,7 @@ CONFIG_FILE_LOCKING=y
|
|||
# CONFIG_XFS_FS is not set
|
||||
# CONFIG_GFS2_FS is not set
|
||||
# CONFIG_OCFS2_FS is not set
|
||||
# CONFIG_BTRFS_FS is not set
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_INOTIFY_USER=y
|
||||
|
|
@ -1800,6 +1876,11 @@ CONFIG_INOTIFY_USER=y
|
|||
CONFIG_AUTOFS4_FS=m
|
||||
CONFIG_FUSE_FS=m
|
||||
|
||||
#
|
||||
# Caches
|
||||
#
|
||||
# CONFIG_FSCACHE is not set
|
||||
|
||||
#
|
||||
# CD-ROM/DVD Filesystems
|
||||
#
|
||||
|
|
@ -1831,10 +1912,7 @@ CONFIG_TMPFS=y
|
|||
# CONFIG_TMPFS_POSIX_ACL is not set
|
||||
# CONFIG_HUGETLB_PAGE is not set
|
||||
# CONFIG_CONFIGFS_FS is not set
|
||||
|
||||
#
|
||||
# Miscellaneous filesystems
|
||||
#
|
||||
CONFIG_MISC_FILESYSTEMS=y
|
||||
# CONFIG_ADFS_FS is not set
|
||||
# CONFIG_AFFS_FS is not set
|
||||
CONFIG_HFS_FS=m
|
||||
|
|
@ -1843,6 +1921,7 @@ CONFIG_HFSPLUS_FS=m
|
|||
# CONFIG_BFS_FS is not set
|
||||
# CONFIG_EFS_FS is not set
|
||||
# CONFIG_CRAMFS is not set
|
||||
# CONFIG_SQUASHFS is not set
|
||||
# CONFIG_VXFS_FS is not set
|
||||
# CONFIG_MINIX_FS is not set
|
||||
# CONFIG_OMFS_FS is not set
|
||||
|
|
@ -1851,6 +1930,7 @@ CONFIG_HFSPLUS_FS=m
|
|||
# CONFIG_ROMFS_FS is not set
|
||||
# CONFIG_SYSV_FS is not set
|
||||
# CONFIG_UFS_FS is not set
|
||||
# CONFIG_NILFS2_FS is not set
|
||||
CONFIG_NETWORK_FILESYSTEMS=y
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_NFS_V3=y
|
||||
|
|
@ -1868,7 +1948,6 @@ CONFIG_NFS_ACL_SUPPORT=y
|
|||
CONFIG_NFS_COMMON=y
|
||||
CONFIG_SUNRPC=y
|
||||
CONFIG_SUNRPC_GSS=y
|
||||
# CONFIG_SUNRPC_REGISTER_V4 is not set
|
||||
CONFIG_RPCSEC_GSS_KRB5=y
|
||||
# CONFIG_RPCSEC_GSS_SPKM3 is not set
|
||||
CONFIG_SMB_FS=m
|
||||
|
|
@ -1940,11 +2019,13 @@ CONFIG_NLS_ISO8859_1=m
|
|||
# CONFIG_NLS_KOI8_U is not set
|
||||
CONFIG_NLS_UTF8=m
|
||||
# CONFIG_DLM is not set
|
||||
CONFIG_BINARY_PRINTF=y
|
||||
|
||||
#
|
||||
# Library routines
|
||||
#
|
||||
CONFIG_BITREVERSE=y
|
||||
CONFIG_GENERIC_FIND_LAST_BIT=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRC_T10DIF=y
|
||||
|
|
@ -1954,15 +2035,18 @@ CONFIG_CRC32=y
|
|||
CONFIG_LIBCRC32C=m
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_DECOMPRESS_GZIP=y
|
||||
CONFIG_DECOMPRESS_BZIP2=y
|
||||
CONFIG_DECOMPRESS_LZMA=y
|
||||
CONFIG_TEXTSEARCH=y
|
||||
CONFIG_TEXTSEARCH_KMP=m
|
||||
CONFIG_TEXTSEARCH_BM=m
|
||||
CONFIG_TEXTSEARCH_FSM=m
|
||||
CONFIG_PLIST=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAVE_LMB=y
|
||||
CONFIG_NLATTR=y
|
||||
|
||||
#
|
||||
# Kernel hacking
|
||||
|
|
@ -1973,13 +2057,16 @@ CONFIG_ENABLE_MUST_CHECK=y
|
|||
CONFIG_FRAME_WARN=1024
|
||||
CONFIG_MAGIC_SYSRQ=y
|
||||
# CONFIG_UNUSED_SYMBOLS is not set
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
CONFIG_DEBUG_FS=y
|
||||
# CONFIG_HEADERS_CHECK is not set
|
||||
CONFIG_DEBUG_KERNEL=y
|
||||
# CONFIG_DEBUG_SHIRQ is not set
|
||||
CONFIG_DETECT_SOFTLOCKUP=y
|
||||
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
|
||||
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
|
||||
CONFIG_DETECT_HUNG_TASK=y
|
||||
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
|
||||
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
|
||||
CONFIG_SCHED_DEBUG=y
|
||||
CONFIG_SCHEDSTATS=y
|
||||
# CONFIG_TIMER_STATS is not set
|
||||
|
|
@ -1994,6 +2081,7 @@ CONFIG_SCHEDSTATS=y
|
|||
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
|
||||
CONFIG_STACKTRACE=y
|
||||
# CONFIG_DEBUG_KOBJECT is not set
|
||||
# CONFIG_DEBUG_HIGHMEM is not set
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_INFO is not set
|
||||
# CONFIG_DEBUG_VM is not set
|
||||
|
|
@ -2001,6 +2089,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
|
|||
CONFIG_DEBUG_MEMORY_INIT=y
|
||||
# CONFIG_DEBUG_LIST is not set
|
||||
# CONFIG_DEBUG_SG is not set
|
||||
# CONFIG_DEBUG_NOTIFIERS is not set
|
||||
# CONFIG_BOOT_PRINTK_DELAY is not set
|
||||
# CONFIG_RCU_TORTURE_TEST is not set
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
|
|
@ -2009,7 +2098,14 @@ CONFIG_DEBUG_MEMORY_INIT=y
|
|||
# CONFIG_FAULT_INJECTION is not set
|
||||
CONFIG_LATENCYTOP=y
|
||||
CONFIG_SYSCTL_SYSCALL_CHECK=y
|
||||
CONFIG_NOP_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_RING_BUFFER=y
|
||||
CONFIG_TRACING=y
|
||||
CONFIG_TRACING_SUPPORT=y
|
||||
|
||||
#
|
||||
# Tracers
|
||||
|
|
@ -2017,12 +2113,19 @@ CONFIG_HAVE_FUNCTION_TRACER=y
|
|||
# CONFIG_FUNCTION_TRACER is not set
|
||||
# CONFIG_SCHED_TRACER is not set
|
||||
# CONFIG_CONTEXT_SWITCH_TRACER is not set
|
||||
# CONFIG_EVENT_TRACER is not set
|
||||
# CONFIG_BOOT_TRACER is not set
|
||||
# CONFIG_TRACE_BRANCH_PROFILING is not set
|
||||
# CONFIG_STACK_TRACER is not set
|
||||
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
|
||||
# CONFIG_KMEMTRACE is not set
|
||||
# CONFIG_WORKQUEUE_TRACER is not set
|
||||
# CONFIG_BLK_DEV_IO_TRACE is not set
|
||||
# CONFIG_FTRACE_STARTUP_TEST is not set
|
||||
# CONFIG_DYNAMIC_DEBUG is not set
|
||||
# CONFIG_SAMPLES is not set
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
# CONFIG_KGDB is not set
|
||||
CONFIG_PRINT_STACK_DEPTH=64
|
||||
# CONFIG_DEBUG_STACKOVERFLOW is not set
|
||||
# CONFIG_DEBUG_STACK_USAGE is not set
|
||||
# CONFIG_CODE_PATCHING_SELFTEST is not set
|
||||
|
|
@ -2033,6 +2136,7 @@ CONFIG_XMON_DEFAULT=y
|
|||
CONFIG_XMON_DISASSEMBLY=y
|
||||
CONFIG_DEBUGGER=y
|
||||
CONFIG_IRQSTACKS=y
|
||||
# CONFIG_VIRQ_DEBUG is not set
|
||||
# CONFIG_BDI_SWITCH is not set
|
||||
CONFIG_BOOTX_TEXT=y
|
||||
# CONFIG_PPC_EARLY_DEBUG is not set
|
||||
|
|
@ -2051,13 +2155,20 @@ CONFIG_CRYPTO=y
|
|||
#
|
||||
# CONFIG_CRYPTO_FIPS is not set
|
||||
CONFIG_CRYPTO_ALGAPI=y
|
||||
CONFIG_CRYPTO_ALGAPI2=y
|
||||
CONFIG_CRYPTO_AEAD=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_BLKCIPHER=y
|
||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_PCOMP=y
|
||||
CONFIG_CRYPTO_MANAGER=y
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
# CONFIG_CRYPTO_GF128MUL is not set
|
||||
CONFIG_CRYPTO_NULL=m
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
# CONFIG_CRYPTO_CRYPTD is not set
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
# CONFIG_CRYPTO_TEST is not set
|
||||
|
|
@ -2127,6 +2238,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
|
|||
# Compression
|
||||
#
|
||||
CONFIG_CRYPTO_DEFLATE=m
|
||||
# CONFIG_CRYPTO_ZLIB is not set
|
||||
# CONFIG_CRYPTO_LZO is not set
|
||||
|
||||
#
|
||||
|
|
|
|||
|
|
@ -26,7 +26,9 @@
|
|||
* allocate the space "normally" and use the cache management functions
|
||||
* to ensure it is consistent.
|
||||
*/
|
||||
extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
|
||||
struct device;
|
||||
extern void *__dma_alloc_coherent(struct device *dev, size_t size,
|
||||
dma_addr_t *handle, gfp_t gfp);
|
||||
extern void __dma_free_coherent(size_t size, void *vaddr);
|
||||
extern void __dma_sync(void *vaddr, size_t size, int direction);
|
||||
extern void __dma_sync_page(struct page *page, unsigned long offset,
|
||||
|
|
@ -37,7 +39,7 @@ extern void __dma_sync_page(struct page *page, unsigned long offset,
|
|||
* Cache coherent cores.
|
||||
*/
|
||||
|
||||
#define __dma_alloc_coherent(gfp, size, handle) NULL
|
||||
#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
|
||||
#define __dma_free_coherent(size, addr) ((void)0)
|
||||
#define __dma_sync(addr, size, rw) ((void)0)
|
||||
#define __dma_sync_page(pg, off, sz, rw) ((void)0)
|
||||
|
|
|
|||
|
|
@ -14,8 +14,6 @@
|
|||
#ifndef _ASM_FIXMAP_H
|
||||
#define _ASM_FIXMAP_H
|
||||
|
||||
extern unsigned long FIXADDR_TOP;
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
#include <linux/kernel.h>
|
||||
#include <asm/page.h>
|
||||
|
|
@ -24,6 +22,8 @@ extern unsigned long FIXADDR_TOP;
|
|||
#include <asm/kmap_types.h>
|
||||
#endif
|
||||
|
||||
#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
|
||||
|
||||
/*
|
||||
* Here we define all the compile-time 'special' virtual
|
||||
* addresses. The point is to have a constant address at
|
||||
|
|
|
|||
|
|
@ -10,7 +10,7 @@
|
|||
|
||||
extern unsigned long va_to_phys(unsigned long address);
|
||||
extern pte_t *va_to_pte(unsigned long address);
|
||||
extern unsigned long ioremap_bot, ioremap_base;
|
||||
extern unsigned long ioremap_bot;
|
||||
|
||||
#ifdef CONFIG_44x
|
||||
extern int icache_44x_need_flush;
|
||||
|
|
@ -55,9 +55,31 @@ extern int icache_44x_need_flush;
|
|||
#define pgd_ERROR(e) \
|
||||
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
|
||||
|
||||
/*
|
||||
* This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
|
||||
* value (for now) on others, from where we can start layout kernel
|
||||
* virtual space that goes below PKMAP and FIXMAP
|
||||
*/
|
||||
#ifdef CONFIG_HIGHMEM
|
||||
#define KVIRT_TOP PKMAP_BASE
|
||||
#else
|
||||
#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* ioremap_bot starts at that address. Early ioremaps move down from there,
|
||||
* until mem_init() at which point this becomes the top of the vmalloc
|
||||
* and ioremap space
|
||||
*/
|
||||
#ifdef CONFIG_NOT_COHERENT_CACHE
|
||||
#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
|
||||
#else
|
||||
#define IOREMAP_TOP KVIRT_TOP
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Just any arbitrary offset to the start of the vmalloc VM area: the
|
||||
* current 64MB value just means that there will be a 64MB "hole" after the
|
||||
* current 16MB value just means that there will be a 64MB "hole" after the
|
||||
* physical memory until the kernel virtual memory starts. That means that
|
||||
* any out-of-bounds memory accesses will hopefully be caught.
|
||||
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@ void *dma_direct_alloc_coherent(struct device *dev, size_t size,
|
|||
{
|
||||
void *ret;
|
||||
#ifdef CONFIG_NOT_COHERENT_CACHE
|
||||
ret = __dma_alloc_coherent(size, dma_handle, flag);
|
||||
ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
|
||||
if (ret == NULL)
|
||||
return NULL;
|
||||
*dma_handle += get_dma_direct_offset(dev);
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue