Merge branch 'topic/asoc' into for-linus

2012-03-18 18:22:37 +01:00 · 2012-03-18 18:22:37 +01:00 · cb3f2adc03
parent 44c76a960a 828006de1b
commit cb3f2adc03
1432 changed files with 25256 additions and 60314 deletions
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@ -50,7 +50,9 @@

     <sect1><title>Delaying, scheduling, and timer routines</title>
 !Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
 !Ekernel/timer.c
     </sect1>
@ -100,9 +102,12 @@ X!Iinclude/linux/kobject.h
 !Iinclude/linux/device.h
     </sect1>
     <sect1><title>Device Drivers Base</title>
+!Idrivers/base/init.c
 !Edrivers/base/driver.c
 !Edrivers/base/core.c
+!Edrivers/base/syscore.c
 !Edrivers/base/class.c
+!Idrivers/base/node.c
 !Edrivers/base/firmware_class.c
 !Edrivers/base/transport_class.c
 <!-- Cannot be included, because
@ -111,13 +116,18 @@ X!Iinclude/linux/kobject.h
     exceed allowed 44 characters maximum
 X!Edrivers/base/attribute_container.c
 -->
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
 <!--
 X!Edrivers/base/interface.c
 -->
 !Iinclude/linux/platform_device.h
 !Edrivers/base/platform.c
 !Edrivers/base/bus.c
+     </sect1>
+     <sect1><title>Device Drivers DMA Management</title>
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
     </sect1>
     <sect1><title>Device Drivers Power Management</title>
 !Edrivers/base/power/main.c
@ -216,9 +226,8 @@ X!Isound/sound_firmware.c

  <chapter id="uart16x50">
     <title>16x50 UART Driver</title>
-!Iinclude/linux/serial_core.h
 !Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
  </chapter>

  <chapter id="fbdev">
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@ -317,7 +317,7 @@ CPU B:  spin_unlock_irqrestore(&amp;dev_lock, flags)
  <chapter id="pubfunctions">
     <title>Public Functions Provided</title>
 !Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
  </chapter>

 </book>
--- a/Documentation/devicetree/bindings/sound/alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/alc5632.txt
@ -0,0 +1,24 @@
+ALC5632 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+  - compatible : "realtek,alc5632"
+
+  - reg : the I2C address of the device.
+
+  - gpio-controller : Indicates this device is a GPIO controller.
+
+  - #gpio-cells : Should be two. The first cell is the pin number and the
+    second cell is used to specify optional parameters (currently unused).
+
+Example:
+
+alc5632: alc5632@1e {
+	compatible = "realtek,alc5632";
+	reg = <0x1a>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+};
--- a/Documentation/devicetree/bindings/sound/imx-audmux.txt
+++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt
@ -0,0 +1,13 @@
+Freescale Digital Audio Mux (AUDMUX) device
+
+Required properties:
+- compatible : "fsl,imx21-audmux" for AUDMUX version firstly used on i.MX21,
+  or "fsl,imx31-audmux" for the version firstly used on i.MX31.
+- reg : Should contain AUDMUX registers location and length
+
+Example:
+
+audmux@021d8000 {
+	compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
+	reg = <0x021d8000 0x4000>;
+};
--- a/Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt
+++ b/Documentation/devicetree/bindings/sound/soc/codecs/fsl-sgtl5000.txt
--- a/Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt
@ -0,0 +1,59 @@
+NVIDIA Tegra audio complex
+
+Required properties:
+- compatible : "nvidia,tegra-audio-alc5632"
+- nvidia,model : The user-visible name of this sound complex.
+- nvidia,audio-routing : A list of the connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source. Valid names for sources and
+  sinks are the ALC5632's pins:
+
+  ALC5632 pins:
+
+  * SPK_OUTP
+  * SPK_OUTN
+  * HP_OUT_L
+  * HP_OUT_R
+  * AUX_OUT_P
+  * AUX_OUT_N
+  * LINE_IN_L
+  * LINE_IN_R
+  * PHONE_P
+  * PHONE_N
+  * MIC1_P
+  * MIC1_N
+  * MIC2_P
+  * MIC2_N
+  * MICBIAS1
+  * DMICDAT
+
+  Board connectors:
+
+  * Headset Stereophone
+  * Int Spk
+  * Headset Mic
+  * Digital Mic
+
+- nvidia,i2s-controller : The phandle of the Tegra I2S controller
+- nvidia,audio-codec : The phandle of the ALC5632 audio codec
+
+Example:
+
+sound {
+	compatible = "nvidia,tegra-audio-alc5632-paz00",
+				 "nvidia,tegra-audio-alc5632";
+
+	nvidia,model = "Compal PAZ00";
+
+	nvidia,audio-routing =
+				"Int Spk", "SPK_OUTP",
+				"Int Spk", "SPK_OUTN",
+				"Headset Mic","MICBIAS1",
+				"MIC1_N", "Headset Mic",
+				"MIC1_P", "Headset Mic",
+				"Headset Stereophone", "HP_OUT_R",
+				"Headset Stereophone", "HP_OUT_L";
+
+	nvidia,i2s-controller = <&tegra_i2s1>;
+	nvidia,audio-codec = <&alc5632>;
+};
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@ -33,6 +33,7 @@ nxp	NXP Semiconductors
 powervr	Imagination Technologies
 qcom	Qualcomm, Inc.
 ramtron	Ramtron International
+realtek Realtek Semiconductor Corp.
 samsung	Samsung Semiconductor
 sbs	Smart Battery System
 schindler	Schindler
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer).
  6. List of managed interfaces
  -----------------------------

+MEM
+  devm_kzalloc()
+  devm_kfree()
+
 IO region
  devm_request_region()
  devm_request_mem_region()
@ -267,3 +271,6 @@ IOMAP
  pcim_iounmap()
  pcim_iomap_table()	: array of mapped addresses indexed by BAR
  pcim_iomap_regions()	: do request_region() and iomap() on multiple BARs
+
+REGULATOR
+  devm_regulator_get()
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@ -510,3 +510,17 @@ Why:	The pci_scan_bus_parented() interface creates a new root bus.  The
 	convert to using pci_scan_root_bus() so they can supply a list of
 	bus resources when the bus is created.
 Who:	Bjorn Helgaas <bhelgaas@google.com>
+
+----------------------------
+
+What:	The CAP9 SoC family will be removed
+When:	3.4
+Files:	arch/arm/mach-at91/at91cap9.c
+	arch/arm/mach-at91/at91cap9_devices.c
+	arch/arm/mach-at91/include/mach/at91cap9.h
+	arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+	arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+	arch/arm/mach-at91/board-cap9adk.c
+Why:	The code is not actively maintained and platforms are now hard to find.
+Who:	Nicolas Ferre <nicolas.ferre@atmel.com>
+	Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in
 class/input/event*/device/capabilities/, and the properties of a device are
 provided in class/input/event*/device/properties.

-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.

 * EV_SYN:
  - Used as markers to separate events. Events may be separated in time or in
@ -63,9 +63,9 @@ for details on valid codes for each type.
 * EV_FF_STATUS:
  - Used to receive force feedback device status.

-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.

 EV_SYN:
 ----------
@ -220,6 +220,56 @@ EV_PWR:
 EV_PWR events are a special type of event used specifically for power
 mangement. Its usage is not well defined. To be addressed later.

+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements.  Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
 Guidelines:
 ==========
 The guidelines below ensure proper single-touch and multi-finger functionality.
@ -240,6 +290,8 @@ used to report when a touch is active on the screen.
 BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
 contact. BTN_TOOL_<name> events should be reported where possible.

+For new hardware, INPUT_PROP_DIRECT should be set.
+
 Trackpads:
 ----------
 Legacy trackpads that only provide relative position information must report
@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active
 on the trackpad. Where multi-finger support is available, BTN_TOOL_<name> should
 be used to report the number of touches active on the trackpad.

+For new hardware, INPUT_PROP_POINTER should be set.
+
 Tablets:
 ----------
 BTN_TOOL_<name> events must be reported when a stylus or other tool is active on
@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
 BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
 meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
 purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@ -857,42 +857,41 @@ case), we define a mapping like this:

 ...
 {
-	.name "2bit"
+	.name = "2bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "4bit"
+	.name = "4bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
-	.function = "mmc0",
 	.group = "mmc0_1_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_2_grp",
 	.dev_name = "foo-mmc.0",
 },
 {
-	.name "8bit"
+	.name = "8bit"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "mmc0",
 	.group = "mmc0_3_grp",
@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true,
 like this:

 {
-	.name "POWERMAP"
+	.name = "POWERMAP"
 	.ctrl_dev_name = "pinctrl-foo",
 	.function = "power_func",
 	.hog_on_boot = true,
@ -1025,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B:

 foo_switch()
 {
-	struct pinmux pmx;
+	struct pinmux *pmx;

 	/* Enable on position A */
 	pmx = pinmux_get(&device, "spi0-pos-A");
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@ -15,7 +15,7 @@ test at least a couple of times in a row for confidence.  [This is necessary,
 because some problems only show up on a second attempt at suspending and
 resuming the system.]  Moreover, hibernating in the "reboot" and "shutdown"
 modes causes the PM core to skip some platform-related callbacks which on ACPI
-systems might be necessary to make hibernation work.  Thus, if you machine fails
+systems might be necessary to make hibernation work.  Thus, if your machine fails
 to hibernate or resume in the "reboot" mode, you should try the "platform" mode:

 # echo platform > /sys/power/disk
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@ -120,10 +120,10 @@ So in practice, the 'at all' may become a 'why freeze kernel threads?' and
 freezing user threads I don't find really objectionable."

 Still, there are kernel threads that may want to be freezable.  For example, if
-a kernel that belongs to a device driver accesses the device directly, it in
-principle needs to know when the device is suspended, so that it doesn't try to
-access it at that time.  However, if the kernel thread is freezable, it will be
-frozen before the driver's .suspend() callback is executed and it will be
+a kernel thread that belongs to a device driver accesses the device directly, it
+in principle needs to know when the device is suspended, so that it doesn't try
+to access it at that time.  However, if the kernel thread is freezable, it will
+be frozen before the driver's .suspend() callback is executed and it will be
 thawed after the driver's .resume() callback has run, so it won't be accessing
 the device while it's suspended.

--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@ -25,7 +25,8 @@ Procedure for submitting patches to the -stable tree:

 - Send the patch, after verifying that it follows the above rules, to
   stable@vger.kernel.org.  You must note the upstream commit ID in the
-   changelog of your submission.
+   changelog of your submission, as well as the kernel version you wish
+   it to be applied to.
 - To have the patch automatically included in the stable tree, add the tag
     Cc: stable@vger.kernel.org
   in the sign-off area. Once the patch is merged it will be applied to
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@ -601,6 +601,8 @@ can be ORed together:
        instead of using the one provided by the hardware.
 512 - A kernel warning has occurred.
 1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.

 ==============================================================

--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@ -284,7 +284,7 @@ method, the sys I/F structure will be built like this:
 The framework includes a simple notification mechanism, in the form of a
 netlink event. Netlink socket initialization is done during the _init_
 of the framework. Drivers which intend to use the notification mechanism
-just need to call generate_netlink_event() with two arguments viz
+just need to call thermal_generate_netlink_event() with two arguments viz
 (originator, event). Typically the originator will be an integer assigned
 to a thermal_zone_device when it registers itself with the framework. The
 event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
--- a/Documentation/virtual/00-INDEX
+++ b/Documentation/virtual/00-INDEX
@ -4,8 +4,6 @@ Virtualization support in the Linux kernel.
 	- this file.
 kvm/
 	- Kernel Virtual Machine.  See also http://linux-kvm.org
-lguest/
-	- Extremely simple hypervisor for experimental/educational use.
 uml/
 	- User Mode Linux, builds/runs Linux kernel as a userspace program.
 virtio.txt
--- a/83
+++ b/83
@ -159,7 +159,7 @@ S:	Maintained
 F:	drivers/net/ethernet/realtek/r8169.c

 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
 S:	Maintained
@ -789,12 +789,6 @@ F:	arch/arm/mach-mx*/
 F:	arch/arm/mach-imx/
 F:	arch/arm/plat-mxc/

-ARM/FREESCALE IMX51
-M:	Amit Kucheria <amit.kucheria@canonical.com>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-mx5/
-
 ARM/FREESCALE IMX6
 M:	Shawn Guo <shawn.guo@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -1783,9 +1777,9 @@ X:	net/wireless/wext*

 CHAR and MISC DRIVERS
 M:	Arnd Bergmann <arnd@arndb.de>
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S:	Maintained
+S:	Supported
 F:	drivers/char/*
 F:	drivers/misc/*

@ -2246,6 +2240,17 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
 S:	Supported
 F:	fs/dlm/

+DMA BUFFER SHARING FRAMEWORK
+M:	Sumit Semwal <sumit.semwal@linaro.org>
+S:	Maintained
+L:	linux-media@vger.kernel.org
+L:	dri-devel@lists.freedesktop.org
+L:	linaro-mm-sig@lists.linaro.org
+F:	drivers/base/dma-buf*
+F:	include/linux/dma-buf*
+F:	Documentation/dma-buf-sharing.txt
+T:	git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
+
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
 M:	Vinod Koul <vinod.koul@intel.com>
 M:	Dan Williams <dan.j.williams@intel.com>
@ -2276,7 +2281,7 @@ F:	drivers/acpi/dock.c
 DOCUMENTATION
 M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
-T:	quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T:	quilt http://xenotime.net/kernel-doc-patches/current/
 S:	Maintained
 F:	Documentation/

@ -2309,7 +2314,7 @@ F:	lib/lru_cache.c
 F:	Documentation/blockdev/drbd/

 DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
 S:	Supported
 F:	Documentation/kobject.txt
@ -2339,6 +2344,9 @@ F:	include/drm/i915*

 DRM DRIVERS FOR EXYNOS
 M:	Inki Dae <inki.dae@samsung.com>
+M:	Joonyoung Shim <jy0922.shim@samsung.com>
+M:	Seung-Woo Kim <sw0312.kim@samsung.com>
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/exynos
@ -2391,7 +2399,7 @@ F:	net/bridge/netfilter/ebt*.c

 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <kirkland@canonical.com>
+M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@ -3310,6 +3318,12 @@ S:	Maintained
 F:	net/ieee802154/
 F:	drivers/ieee802154/

+IIO SUBSYSTEM AND DRIVERS
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/iio/
+
 IKANOS/ADI EAGLE ADSL USB DRIVER
 M:	Matthieu Castet <castet.matthieu@free.fr>
 M:	Stanislaw Gruszka <stf_xl@wp.pl>
@ -3978,11 +3992,11 @@ M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@lists.ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Odd Fixes
-F:	Documentation/virtual/lguest/
+F:	arch/x86/include/asm/lguest*.h
 F:	arch/x86/lguest/
 F:	drivers/lguest/
 F:	include/linux/lguest*.h
-F:	arch/x86/include/asm/lguest*.h
+F:	tools/lguest/

 LINUX FOR IBM pSERIES (RS/6000)
 M:	Paul Mackerras <paulus@au.ibm.com>
@ -4122,10 +4136,11 @@ L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
 F:	Documentation/ldm.txt
-F:	fs/partitions/ldm.*
+F:	block/partitions/ldm.*

 LogFS
 M:	Joern Engel <joern@logfs.org>
+M:	Prasad Joshi <prasadjoshi.linux@gmail.com>
 L:	logfs@logfs.org
 W:	logfs.org
 S:	Maintained
@ -4267,13 +4282,6 @@ S:	Orphan
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h

-MAX1668 TEMPERATURE SENSOR DRIVER
-M:	"David George" <david.george@ska.ac.za>
-L:	lm-sensors@lm-sensors.org
-S:	Maintained
-F:	Documentation/hwmon/max1668
-F:	drivers/hwmon/max1668.c
-
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
 L:	lm-sensors@lm-sensors.org
@ -5625,7 +5633,7 @@ W:	http://www.ibm.com/developerworks/linux/linux390/
 S:	Supported
 F:	arch/s390/
 F:	drivers/s390/
-F:	fs/partitions/ibm.c
+F:	block/partitions/ibm.c
 F:	Documentation/s390/
 F:	Documentation/DocBook/s390*

@ -6268,15 +6276,15 @@ S:	Maintained
 F:	arch/alpha/kernel/srm_env.c

 STABLE BRANCH
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	stable@vger.kernel.org
-S:	Maintained
+S:	Supported

 STAGING SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
 L:	devel@driverdev.osuosl.org
-S:	Maintained
+S:	Supported
 F:	drivers/staging/

 STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@ -6388,11 +6396,6 @@ M:	Omar Ramirez Luna <omar.ramirez@ti.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/

-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L:	linux-media@vger.kernel.org
-S:	Odd Fixes
-F:	drivers/staging/tm6000/
-
 STAGING - USB ENE SM/MS CARD READER DRIVER
 M:	Al Cho <acho@novell.com>
 S:	Odd Fixes
@ -6661,10 +6664,10 @@ S:	Maintained
 K:	^Subject:.*(?i)trivial

 TTY LAYER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
-S:	Maintained
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F:	drivers/tty/*
+F:	drivers/tty/
 F:	drivers/tty/serial/serial_core.c
 F:	include/linux/serial_core.h
 F:	include/linux/serial.h
@ -6950,7 +6953,7 @@ S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c

 USB SERIAL DRIVER
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@ -6965,9 +6968,8 @@ S:	Maintained
 F:	drivers/usb/serial/empeg.c

 USB SERIAL KEYSPAN DRIVER
-M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
-W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*

@ -6995,7 +6997,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/

 USB SUBSYSTEM
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@ -7082,7 +7084,7 @@ F:	fs/hppfs/

 USERSPACE I/O (UIO)
 M:	"Hans J. Koch" <hjk@hansjkoch.de>
-M:	Greg Kroah-Hartman <gregkh@suse.de>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
@ -7357,6 +7359,7 @@ S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
--- a/2
+++ b/2
@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 3
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel

 # *DOCUMENTATION*
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@ -754,7 +754,7 @@ config ARCH_SA1100
 	select ARCH_HAS_CPUFREQ
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
-	select CLKDEV_LOOKUP
+	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
@ -825,7 +825,6 @@ config ARCH_S5PC100
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
@ -842,7 +841,6 @@ config ARCH_S5PV210
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SCHED_CLOCK
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@ -29,6 +29,7 @@
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
 		interrupt-controller;
+		cpu-offset = <0x8000>;
 		reg = <0x10490000 0x1000>, <0x10480000 0x100>;
 	};

--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@ -46,11 +46,11 @@
 	};

 	serial@70006200 {
-		status = "disable";
+		clock-frequency = <216000000>;
 	};

 	serial@70006300 {
-		clock-frequency = <216000000>;
+		status = "disable";
 	};

 	serial@70006400 {
@ -60,7 +60,7 @@
 	sdhci@c8000000 {
 		cd-gpios = <&gpio 173 0>; /* gpio PV5 */
 		wp-gpios = <&gpio 57 0>;  /* gpio PH1 */
-		power-gpios = <&gpio 155 0>; /* gpio PT3 */
+		power-gpios = <&gpio 169 0>; /* gpio PV1 */
 	};

 	sdhci@c8000200 {
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@ -41,6 +41,7 @@

 #include <asm/irq.h>
 #include <asm/exception.h>
+#include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>

@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	unsigned int gic_irqs = gic->gic_irqs;
 	struct irq_domain *domain = &gic->domain;
 	void __iomem *base = gic_data_dist_base(gic);
-	u32 cpu = 0;
-
-#ifdef CONFIG_SMP
-	cpu = cpu_logical_map(smp_processor_id());
-#endif
+	u32 cpu = cpu_logical_map(smp_processor_id());

 	cpumask = 1 << cpu;
 	cpumask |= cpumask << 8;
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
 CONFIG_RELAY=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_MACH_MX51_EFIKAMX=y
 CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@ -1,144 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@ -237,7 +237,7 @@
 */
 #ifdef CONFIG_THUMB2_KERNEL

-	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
 9999:
 	.if	\inc == 1
 	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
@ -277,7 +277,7 @@

 #else	/* !CONFIG_THUMB2_KERNEL */

-	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
 	.rept	\rept
 9999:
 	.if	\inc == 1
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@ -83,9 +83,9 @@
 * instructions (inline assembly)
 */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	#instr "t"
+#define TUSER(instr)	#instr "t"
 #else
-#define T(instr)	#instr
+#define TUSER(instr)	#instr
 #endif

 #else /* __ASSEMBLY__ */
@ -95,9 +95,9 @@
 * instructions
 */
 #ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr)	instr ## t
+#define TUSER(instr)	instr ## t
 #else
-#define T(instr)	instr
+#define TUSER(instr)	instr
 #endif

 #endif /* __ASSEMBLY__ */
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,

 #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%3]\n"			\
+	"1:	" TUSER(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%3]\n"			\
+	"2:	" TUSER(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
 	__futex_atomic_ex_table("%5")				\
 	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
 		return -EFAULT;

 	__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
-	"1:	" T(ldr) "	%1, [%4]\n"
+	"1:	" TUSER(ldr) "	%1, [%4]\n"
 	"	teq	%1, %2\n"
 	"	it	eq	@ explicit IT needed for the 2b label\n"
-	"2:	" T(streq) "	%3, [%4]\n"
+	"2:	" TUSER(streq) "	%3, [%4]\n"
 	__futex_atomic_ex_table("%5")
 	: "+r" (ret), "=&r" (val)
 	: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@ -70,12 +70,6 @@ extern void platform_secondary_init(unsigned int cpu);
 */
 extern void platform_smp_prepare_cpus(unsigned int);

-/*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
-
 /*
 * Initial data for bringing up a secondary CPU.
 */
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void)
 }
 #endif

+/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[];
+#define cpu_logical_map(cpu)	__cpu_logical_map[cpu]
+
 #endif
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
 	unsigned long addr)
 {
 	pgtable_page_dtor(pte);
-	tlb_add_flush(tlb, addr);
+
+	/*
+	 * With the classic ARM MMU, a pte page has two corresponding pmd
+	 * entries, each covering 1MB.
+	 */
+	addr &= PMD_MASK;
+	tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+	tlb_add_flush(tlb, addr + SZ_1M);
+
 	tlb_remove_page(tlb, pte);
 }

--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@ -227,7 +227,7 @@ do {									\

 #define __get_user_asm_byte(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldrb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldrb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@ -263,7 +263,7 @@ do {									\

 #define __get_user_asm_word(x,addr,err)				\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(ldr) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@ -308,7 +308,7 @@ do {									\

 #define __put_user_asm_byte(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(strb) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(strb) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@ -341,7 +341,7 @@ do {									\

 #define __put_user_asm_word(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
-	"1:	" T(str) "	%1,[%2],#0\n"			\
+	"1:	" TUSER(str) "	%1,[%2],#0\n"			\
 	"2:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
@ -366,10 +366,10 @@ do {									\

 #define __put_user_asm_dword(x,__pu_addr,err)			\
 	__asm__ __volatile__(					\
- ARM(	"1:	" T(str) "	" __reg_oper1 ", [%1], #4\n"	)	\
- ARM(	"2:	" T(str) "	" __reg_oper0 ", [%1]\n"	)	\
- THUMB(	"1:	" T(str) "	" __reg_oper1 ", [%1]\n"	)	\
- THUMB(	"2:	" T(str) "	" __reg_oper0 ", [%1, #4]\n"	)	\
+ ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
+ ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
+ THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
+ THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
 	"3:\n"							\
 	"	.pushsection .fixup,\"ax\"\n"			\
 	"	.align	2\n"					\
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@ -790,7 +790,7 @@ __kuser_cmpxchg64:				@ 0xffff0f60
 	smp_dmb	arm
 	rsbs	r0, r3, #0			@ set returned val and C flag
 	ldmfd	sp!, {r4, r5, r6, r7}
-	bx	lr
+	usr_ret	lr

 #elif !defined(CONFIG_SMP)

--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@ -149,6 +149,11 @@ ENDPROC(ret_from_fork)
 #endif
 #endif

+.macro mcount_adjust_addr rd, rn
+	bic	\rd, \rn, #1		@ clear the Thumb bit if present
+	sub	\rd, \rd, #MCOUNT_INSN_SIZE
+.endm
+
 .macro __mcount suffix
 	mcount_enter
 	ldr	r0, =ftrace_trace_function
@ -173,8 +178,7 @@ ENDPROC(ret_from_fork)
 	mcount_exit

 1: 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function
 	adr	lr, BSYM(2f)
 	mov	pc, r2
 2:	mcount_exit
@ -184,8 +188,7 @@ ENDPROC(ret_from_fork)
 	mcount_enter

 	mcount_get_lr	r1			@ lr of instrumented func
-	mov	r0, lr				@ instrumented function
-	sub	r0, r0, #MCOUNT_INSN_SIZE
+	mcount_adjust_addr	r0, lr		@ instrumented function

 	.globl ftrace_call\suffix
 ftrace_call\suffix:
@ -205,11 +208,11 @@ ftrace_graph_call\suffix:
 #ifdef CONFIG_DYNAMIC_FTRACE
 	@ called from __ftrace_caller, saved in mcount_enter
 	ldr	r1, [sp, #16]		@ instrumented routine (func)
+	mcount_adjust_addr	r1, r1
 #else
 	@ called from __mcount, untouched in lr
-	mov	r1, lr			@ instrumented routine (func)
+	mcount_adjust_addr	r1, lr	@ instrumented routine (func)
 #endif
-	sub	r1, r1, #MCOUNT_INSN_SIZE
 	mov	r2, fp			@ frame pointer
 	bl	prepare_ftrace_return
 	mcount_exit
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };

 /*
@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
 			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
 		},
 	},
+	[C(NODE)] = {
+		[C(OP_READ)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_WRITE)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+		[C(OP_PREFETCH)] = {
+			[C(RESULT_ACCESS)]	= CACHE_OP_UNSUPPORTED,
+			[C(RESULT_MISS)]	= CACHE_OP_UNSUPPORTED,
+		},
+	},
 };

 /*
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@ -699,10 +699,13 @@ static int vfp_set(struct task_struct *target,
 {
 	int ret;
 	struct thread_info *thread = task_thread_info(target);
-	struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+	struct vfp_hard_struct new_vfp;
 	const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
 	const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);

+	vfp_sync_hwstate(thread);
+	new_vfp = thread->vfpstate.hard;
+
 	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &new_vfp.fpregs,
 				  user_fpregs_offset,
@ -723,9 +726,8 @@ static int vfp_set(struct task_struct *target,
 	if (ret)
 		return ret;

-	vfp_sync_hwstate(thread);
-	thread->vfpstate.hard = new_vfp;
 	vfp_flush_hwstate(thread);
+	thread->vfpstate.hard = new_vfp;

 	return 0;
 }
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@ -21,7 +21,6 @@
 #include <linux/init.h>
 #include <linux/kexec.h>
 #include <linux/of_fdt.h>
-#include <linux/crash_dump.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/interrupt.h>
@ -160,7 +159,7 @@ static struct resource mem_res[] = {
 		.flags = IORESOURCE_MEM
 	},
 	{
-		.name = "Kernel text",
+		.name = "Kernel code",
 		.start = 0,
 		.end = 0,
 		.flags = IORESOURCE_MEM
@ -427,6 +426,20 @@ void cpu_init(void)
 	    : "r14");
 }

+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+	int i;
+	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+	cpu_logical_map(0) = cpu;
+	for (i = 1; i < NR_CPUS; ++i)
+		cpu_logical_map(i) = i == cpu ? 0 : i;
+
+	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
 static void __init setup_processor(void)
 {
 	struct proc_info_list *list;
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;

+	vfp_flush_hwstate(thread);
+
 	/*
 	 * Copy the floating point registers. There can be unused
 	 * registers see asm/hwcap.h for details.
@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
 	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);

-	if (!err)
-		vfp_flush_hwstate(thread);
-
 	return err ? -EFAULT : 0;
 }

--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@ -233,20 +233,6 @@ void __ref cpu_die(void)
 }
 #endif /* CONFIG_HOTPLUG_CPU */

-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
-	int i;
-	u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
-	cpu_logical_map(0) = cpu;
-	for (i = 1; i < NR_CPUS; ++i)
-		cpu_logical_map(i) = i == cpu ? 0 : i;
-
-	printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
 /*
 * Called by both boot and secondaries to move global data into
 * per-processor storage.
@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
 static void ipi_timer(void)
 {
 	struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
-	irq_enter();
 	evt->event_handler(evt);
-	irq_exit();
 }

 #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs)

 	switch (ipinr) {
 	case IPI_TIMER:
+		irq_enter();
 		ipi_timer();
+		irq_exit();
 		break;

 	case IPI_RESCHEDULE:
@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
 		break;

 	case IPI_CALL_FUNC:
+		irq_enter();
 		generic_smp_call_function_interrupt();
+		irq_exit();
 		break;

 	case IPI_CALL_FUNC_SINGLE:
+		irq_enter();
 		generic_smp_call_function_single_interrupt();
+		irq_exit();
 		break;

 	case IPI_CPU_STOP:
+		irq_enter();
 		ipi_cpu_stop(cpu);
+		irq_exit();
 		break;

 	default:
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	else
 		twd_calibrate_rate();

+	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+
 	clk->name = "local_timer";
 	clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
 			CLOCK_EVT_FEAT_C3STOP;
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err)
 {
 	struct thread_info *thread = current_thread_info();
 	int ret;
+	enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;

 	oops_enter();

@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err)
 	console_verbose();
 	bust_spinlocks(1);
 	if (!user_mode(regs))
-		report_bug(regs->ARM_pc, regs);
+		bug_type = report_bug(regs->ARM_pc, regs);
+	if (bug_type != BUG_TRAP_TYPE_NONE)
+		str = "Oops - BUG";
 	ret = __die(str, err, thread, regs);

 	if (regs && kexec_should_crash(thread->task))
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@ -4,11 +4,13 @@
 */

 #include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
 #include <asm/thread_info.h>
 #include <asm/memory.h>
 #include <asm/page.h>
 	
 #define PROC_INFO							\
+	. = ALIGN(4);							\
 	VMLINUX_SYMBOL(__proc_info_begin) = .;				\
 	*(.proc.info.init)						\
 	VMLINUX_SYMBOL(__proc_info_end) = .;
@ -181,7 +183,7 @@ SECTIONS
 	}
 #endif

-	PERCPU_SECTION(32)
+	PERCPU_SECTION(L1_CACHE_BYTES)

 #ifdef CONFIG_XIP_KERNEL
 	__data_loc = ALIGN(4);		/* location in binary */
@ -212,13 +214,13 @@ SECTIONS
 #endif

 		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(32)
-		READ_MOSTLY_DATA(32)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)

 		/*
 		 * The exception fixup table (might need resorting at runtime)
 		 */
-		. = ALIGN(32);
+		. = ALIGN(4);
 		__start___ex_table = .;
 #ifdef CONFIG_MMU
 		*(__ex_table)
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@ -31,18 +31,18 @@
 #include <asm/domain.h>

 ENTRY(__get_user_1)
-1:	T(ldrb)	r2, [r0]
+1: TUSER(ldrb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_1)

 ENTRY(__get_user_2)
 #ifdef CONFIG_THUMB2_KERNEL
-2:	T(ldrb)	r2, [r0]
-3:	T(ldrb)	r3, [r0, #1]
+2: TUSER(ldrb)	r2, [r0]
+3: TUSER(ldrb)	r3, [r0, #1]
 #else
-2:	T(ldrb)	r2, [r0], #1
-3:	T(ldrb)	r3, [r0]
+2: TUSER(ldrb)	r2, [r0], #1
+3: TUSER(ldrb)	r3, [r0]
 #endif
 #ifndef __ARMEB__
 	orr	r2, r2, r3, lsl #8
@ -54,7 +54,7 @@ ENTRY(__get_user_2)
 ENDPROC(__get_user_2)

 ENTRY(__get_user_4)
-4:	T(ldr)	r2, [r0]
+4: TUSER(ldr)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__get_user_4)
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@ -31,7 +31,7 @@
 #include <asm/domain.h>

 ENTRY(__put_user_1)
-1:	T(strb)	r2, [r0]
+1: TUSER(strb)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_1)
@ -40,19 +40,19 @@ ENTRY(__put_user_2)
 	mov	ip, r2, lsr #8
 #ifdef CONFIG_THUMB2_KERNEL
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0]
-3:	T(strb)	ip, [r0, #1]
+2: TUSER(strb)	r2, [r0]
+3: TUSER(strb)	ip, [r0, #1]
 #else
-2:	T(strb)	ip, [r0]
-3:	T(strb)	r2, [r0, #1]
+2: TUSER(strb)	ip, [r0]
+3: TUSER(strb)	r2, [r0, #1]
 #endif
 #else	/* !CONFIG_THUMB2_KERNEL */
 #ifndef __ARMEB__
-2:	T(strb)	r2, [r0], #1
-3:	T(strb)	ip, [r0]
+2: TUSER(strb)	r2, [r0], #1
+3: TUSER(strb)	ip, [r0]
 #else
-2:	T(strb)	ip, [r0], #1
-3:	T(strb)	r2, [r0]
+2: TUSER(strb)	ip, [r0], #1
+3: TUSER(strb)	r2, [r0]
 #endif
 #endif	/* CONFIG_THUMB2_KERNEL */
 	mov	r0, #0
@ -60,18 +60,18 @@ ENTRY(__put_user_2)
 ENDPROC(__put_user_2)

 ENTRY(__put_user_4)
-4:	T(str)	r2, [r0]
+4: TUSER(str)	r2, [r0]
 	mov	r0, #0
 	mov	pc, lr
 ENDPROC(__put_user_4)

 ENTRY(__put_user_8)
 #ifdef CONFIG_THUMB2_KERNEL
-5:	T(str)	r2, [r0]
-6:	T(str)	r3, [r0, #4]
+5: TUSER(str)	r2, [r0]
+6: TUSER(str)	r3, [r0, #4]
 #else
-5:	T(str)	r2, [r0], #4
-6:	T(str)	r3, [r0]
+5: TUSER(str)	r2, [r0], #4
+6: TUSER(str)	r3, [r0]
 #endif
 	mov	r0, #0
 	mov	pc, lr
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@ -32,11 +32,11 @@
 		rsb	ip, ip, #4
 		cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		sub	r2, r2, ip
 		b	.Lc2u_dest_aligned

@ -59,7 +59,7 @@ ENTRY(__copy_to_user)
 		addmi	ip, r2, #4
 		bmi	.Lc2u_0nowords
 		ldr	r3, [r1], #4
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@ -88,18 +88,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
 		tst	ip, #4
 		ldrne	r3, [r1], #4
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_0fupi
 .Lc2u_0nowords:	teq	ip, #0
 		beq	.Lc2u_finished
 .Lc2u_nowords:	cmp	ip, #2
 		ldrb	r3, [r1], #1
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #1
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished

 .Lc2u_not_enough:
@ -120,7 +120,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #8
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #24
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@ -155,18 +155,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #8
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #24
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_1fupi
 .Lc2u_1nowords:	mov	r3, r7, get_byte_1
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_2
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		movgt	r3, r7, get_byte_3
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished

 .Lc2u_2fupi:	subs	r2, r2, #4
@ -175,7 +175,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #16
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #16
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@ -210,18 +210,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #16
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #16
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_2fupi
 .Lc2u_2nowords:	mov	r3, r7, get_byte_2
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		movge	r3, r7, get_byte_3
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished

 .Lc2u_3fupi:	subs	r2, r2, #4
@ -230,7 +230,7 @@ USER(		T(strgtb) r3, [r0], #1)			@ May fault
 		mov	r3, r7, pull #24
 		ldr	r7, [r1], #4
 		orr	r3, r3, r7, push #8
-USER(		T(str)	r3, [r0], #4)			@ May fault
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
 		mov	ip, r0, lsl #32 - PAGE_SHIFT
 		rsb	ip, ip, #0
 		movs	ip, ip, lsr #32 - PAGE_SHIFT
@ -265,18 +265,18 @@ USER(		T(str)	r3, [r0], #4)			@ May fault
 		movne	r3, r7, pull #24
 		ldrne	r7, [r1], #4
 		orrne	r3, r3, r7, push #8
-		T(strne) r3, [r0], #4			@ Shouldnt fault
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
 		ands	ip, ip, #3
 		beq	.Lc2u_3fupi
 .Lc2u_3nowords:	mov	r3, r7, get_byte_3
 		teq	ip, #0
 		beq	.Lc2u_finished
 		cmp	ip, #2
-USER(		T(strb)	r3, [r0], #1)			@ May fault
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
 		ldrgeb	r3, [r1], #1
-USER(		T(strgeb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
 		ldrgtb	r3, [r1], #0
-USER(		T(strgtb) r3, [r0], #1)			@ May fault
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
 		b	.Lc2u_finished
 ENDPROC(__copy_to_user)

@ -295,11 +295,11 @@ ENDPROC(__copy_to_user)
 .Lcfu_dest_not_aligned:
 		rsb	ip, ip, #4
 		cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		sub	r2, r2, ip
 		b	.Lcfu_dest_aligned
@ -322,7 +322,7 @@ ENTRY(__copy_from_user)
 .Lcfu_0fupi:	subs	r2, r2, #4
 		addmi	ip, r2, #4
 		bmi	.Lcfu_0nowords
-USER(		T(ldr)	r3, [r1], #4)
+USER(	TUSER(	ldr)	r3, [r1], #4)
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
 		rsb	ip, ip, #0
@ -351,18 +351,18 @@ USER(		T(ldr)	r3, [r1], #4)
 		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
-		T(ldrne) r3, [r1], #4			@ Shouldnt fault
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
 		beq	.Lcfu_0fupi
 .Lcfu_0nowords:	teq	ip, #0
 		beq	.Lcfu_finished
 .Lcfu_nowords:	cmp	ip, #2
-USER(		T(ldrb)	r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished

@ -375,7 +375,7 @@ USER(		T(ldrgtb) r3, [r1], #1)			@ May fault

 .Lcfu_src_not_aligned:
 		bic	r1, r1, #3
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		cmp	ip, #2
 		bgt	.Lcfu_3fupi
 		beq	.Lcfu_2fupi
@ -383,7 +383,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_1nowords
 		mov	r3, r7, pull #8
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #24
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@ -418,7 +418,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #8
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #24
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@ -438,7 +438,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_2nowords
 		mov	r3, r7, pull #16
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #16
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@ -474,7 +474,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #16
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #16
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@ -486,7 +486,7 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		strb	r3, [r0], #1
 		movge	r3, r7, get_byte_3
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished

@ -494,7 +494,7 @@ USER(		T(ldrgtb) r3, [r1], #0)			@ May fault
 		addmi	ip, r2, #4
 		bmi	.Lcfu_3nowords
 		mov	r3, r7, pull #24
-USER(		T(ldr)	r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
 		orr	r3, r3, r7, push #8
 		str	r3, [r0], #4
 		mov	ip, r1, lsl #32 - PAGE_SHIFT
@ -529,7 +529,7 @@ USER(		T(ldr)	r7, [r1], #4)			@ May fault
 		stmneia	r0!, {r3 - r4}
 		tst	ip, #4
 		movne	r3, r7, pull #24
-USER(		T(ldrne) r7, [r1], #4)			@ May fault
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
 		orrne	r3, r3, r7, push #8
 		strne	r3, [r0], #4
 		ands	ip, ip, #3
@ -539,9 +539,9 @@ USER(		T(ldrne) r7, [r1], #4)			@ May fault
 		beq	.Lcfu_finished
 		cmp	ip, #2
 		strb	r3, [r0], #1
-USER(		T(ldrgeb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
 		strgeb	r3, [r0], #1
-USER(		T(ldrgtb) r3, [r1], #1)			@ May fault
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
 		strgtb	r3, [r0], #1
 		b	.Lcfu_finished
 ENDPROC(__copy_from_user)
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@ -18,6 +18,12 @@ config HAVE_AT91_USART4
 config HAVE_AT91_USART5
 	bool

+config AT91_SAM9_ALT_RESET
+	bool
+
+config AT91_SAM9G45_RESET
+	bool
+
 menu "Atmel AT91 System-on-Chip"

 choice
@ -39,6 +45,7 @@ config ARCH_AT91SAM9260
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
@ -46,6 +53,7 @@ config ARCH_AT91SAM9261
 	select GENERIC_CLOCKEVENTS
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10
 	select GENERIC_CLOCKEVENTS
 	select HAVE_AT91_DBGU0
 	select HAVE_FB_ATMEL
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
@ -61,6 +70,7 @@ config ARCH_AT91SAM9263
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL
 	select HAVE_AT91_USART3
 	select HAVE_FB_ATMEL
 	select HAVE_AT91_DBGU0
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20
 	select HAVE_AT91_USART4
 	select HAVE_AT91_USART5
 	select HAVE_NET_MACB
+	select AT91_SAM9_ALT_RESET

 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET

 config ARCH_AT91CAP9
 	bool "AT91CAP9"
@ -96,6 +109,7 @@ config ARCH_AT91CAP9
 	select HAVE_FB_ATMEL
 	select HAVE_NET_MACB
 	select HAVE_AT91_DBGU1
+	select AT91_SAM9G45_RESET

 config ARCH_AT91X40
 	bool "AT91x40"
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@ -8,15 +8,17 @@ obj-n		:=
 obj-		:=

 obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
+obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
+obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o

 # CPU-specific support
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G45)	+= at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)	+= at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91X40)	+= at91x40.o at91x40_time.o
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@ -21,7 +21,6 @@
 #include <mach/cpu.h>
 #include <mach/at91cap9.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>

 #include "soc.h"
 #include "generic.h"
@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
 	}
 };

-static void at91cap9_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
 *  AT91CAP9 processor initialization
 * -------------------------------------------------------------------- */
@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void)
 static void __init at91cap9_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+	at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
 }

 static void __init at91cap9_initialize(void)
 {
-	arm_pm_restart = at91cap9_restart;
+	arm_pm_restart = at91sam9g45_restart;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);

 	/* Register GPIO subsystem */
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 *  USB Device (Gadget)
 * -------------------------------------------------------------------- */

-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;

 static struct resource udc_resources[] = {
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void)
 static void __init at91sam9260_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
 }
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 *  USB Device (Gadget)
 * -------------------------------------------------------------------- */

-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;

 static struct resource udc_resources[] = {
@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {}
 *  CF/IDE
 * -------------------------------------------------------------------- */

-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
-	defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
 	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)

 static struct at91_cf_data cf0_data;
@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	if (data->flags & AT91_CF_TRUE_IDE)
 #if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
 		pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
-		pdev->name = "at91_ide";
 #else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
 #endif
 	else
 		pdev->name = "at91_cf";
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void)
 static void __init at91sam9261_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
 }
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 *  USB Device (Gadget)
 * -------------------------------------------------------------------- */

-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;

 static struct resource udc_resources[] = {
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void)
 static void __init at91sam9263_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
 	at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
 *  USB Device (Gadget)
 * -------------------------------------------------------------------- */

-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
 static struct at91_udc_data udc_data;

 static struct resource udc_resources[] = {
@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 *  Compact Flash (PCMCIA or IDE)
 * -------------------------------------------------------------------- */

-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
-    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+	defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)

 static struct at91_cf_data cf0_data;

@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
 	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
 	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */

-	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
 	platform_device_register(pdev);
 }
 #else
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@ -23,7 +23,8 @@
 			.globl	at91sam9_alt_restart

 at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
-			ldr	r1, .at91_va_base_rstc_cr
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]

 			mov	r2, #1
 			mov	r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@ -33,11 +34,9 @@ at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants

 			str	r2, [r0, #AT91_SDRAMC_TR]	@ disable SDRAM access
 			str	r3, [r0, #AT91_SDRAMC_LPR]	@ power down SDRAM
-			str	r4, [r1]			@ reset processor
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor

 			b	.

 .at91_va_base_sdramc:
 	.word AT91_VA_BASE_SYS + AT91_SDRAMC0
-.at91_va_base_rstc_cr:
-	.word AT91_VA_BASE_SYS + AT91_RSTC_CR
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@ -18,7 +18,6 @@
 #include <asm/mach/map.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
 #include <mach/cpu.h>

 #include "soc.h"
@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
 	}
 };

-static void at91sam9g45_restart(char mode, const char *cmd)
-{
-	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
 /* --------------------------------------------------------------------
 *  AT91SAM9G45 processor initialization
 * -------------------------------------------------------------------- */
@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void)
 static void __init at91sam9g45_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
 }
--- a/arch/arm/mach-at91/at91sam9g45_reset.S
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@ -0,0 +1,40 @@
+/*
+ * reset AT91SAM9G45 as per errata
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * GPLv2 Only
+ */
+
+#include <linux/linkage.h>
+#include <mach/hardware.h>
+#include <mach/at91sam9_ddrsdr.h>
+#include <mach/at91_rstc.h>
+
+			.arm
+
+			.globl	at91sam9g45_restart
+
+at91sam9g45_restart:
+			ldr	r0, .at91_va_base_sdramc0	@ preload constants
+			ldr	r1, =at91_rstc_base
+			ldr	r1, [r1]
+
+			mov	r2, #1
+			mov	r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
+			ldr	r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
+
+			.balign	32				@ align to cache line
+
+			str	r2, [r0, #AT91_DDRSDRC_RTR]	@ disable DDR0 access
+			str	r3, [r0, #AT91_DDRSDRC_LPR]	@ power down DDR0
+			str	r4, [r1, #AT91_RSTC_CR]		@ reset processor
+
+			b	.
+
+.at91_va_base_sdramc0:
+	.word AT91_VA_BASE_SYS + AT91_DDRSDRC0
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void)
 static void __init at91sam9rl_ioremap_registers(void)
 {
 	at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+	at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
 	at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
 	at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
 }
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@ -58,7 +58,9 @@ extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);

 /* reset */
+extern void at91_ioremap_rstc(u32 base_addr);
 extern void at91sam9_alt_restart(char, const char *);
+extern void at91sam9g45_restart(char, const char *);

 /* shutdown */
 extern void at91_ioremap_shdwc(u32 base_addr);
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@ -16,13 +16,25 @@
 #ifndef AT91_RSTC_H
 #define AT91_RSTC_H

-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_rstc_base;
+
+#define at91_rstc_read(field) \
+	__raw_readl(at91_rstc_base + field)
+
+#define at91_rstc_write(field, value) \
+	__raw_writel(value, at91_rstc_base + field);
+#else
+.extern at91_rstc_base
+#endif
+
+#define AT91_RSTC_CR		0x00			/* Reset Controller Control Register */
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
 #define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */

-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define AT91_RSTC_SR		0x04			/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
 #define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
 #define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
@ -33,7 +45,7 @@
 #define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
 #define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */

-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define AT91_RSTC_MR		0x08			/* Reset Controller Mode Register */
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@ -83,7 +83,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(cpu_is_at91cap9_revB() ?	\
 			(0xfffffd50 - AT91_BASE_SYS) :	\
 			(0xfffffd60 - AT91_BASE_SYS))
@ -96,6 +95,7 @@
 #define AT91CAP9_BASE_PIOB	0xfffff400
 #define AT91CAP9_BASE_PIOC	0xfffff600
 #define AT91CAP9_BASE_PIOD	0xfffff800
+#define AT91CAP9_BASE_RSTC	0xfffffd00
 #define AT91CAP9_BASE_SHDWC	0xfffffd10
 #define AT91CAP9_BASE_RTT	0xfffffd20
 #define AT91CAP9_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- *
- *  (C) 2008 Andrew Victor
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR		0x00	/* Mode Register */
-#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_DDRSDRC_MODE_NORMAL		0
-#define			AT91_DDRSDRC_MODE_NOP		1
-#define			AT91_DDRSDRC_MODE_PRECHARGE	2
-#define			AT91_DDRSDRC_MODE_LMR		3
-#define			AT91_DDRSDRC_MODE_REFRESH	4
-#define			AT91_DDRSDRC_MODE_EXT_LMR	5
-#define			AT91_DDRSDRC_MODE_DEEP		6
-
-#define AT91_DDRSDRC_RTR	0x04	/* Refresh Timer Register */
-#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR		0x08	/* Configuration Register */
-#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
-#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
-#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
-#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
-#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
-#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
-#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
-#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
-#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_DDRSDRC_NR_11	(0 << 2)
-#define			AT91_DDRSDRC_NR_12	(1 << 2)
-#define			AT91_DDRSDRC_NR_13	(2 << 2)
-#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
-#define			AT91_DDRSDRC_CAS_2	(2 << 4)
-#define			AT91_DDRSDRC_CAS_3	(3 << 4)
-#define			AT91_DDRSDRC_CAS_25	(6 << 4)
-#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
-#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
-#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
-#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
-#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
-#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
-#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
-#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
-#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
-#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
-#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
-#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
-#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR	0x18	/* Low Power Register */
-#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_DDRSDRC_LPCB_DISABLE		0
-#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
-#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
-#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
-#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
-#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_DDRSDRC_MDR	0x1C	/* Memory Device Register */
-#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_DDRSDRC_MD_SDR		0
-#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
-#define			AT91_DDRSDRC_MD_DDR		2
-#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-
-#define AT91_DDRSDRC_DLLR	0x20	/* DLL Information Register */
-#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
-#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
-#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
-#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
-#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
-#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
-#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
-#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
-#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
-
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
-	at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
-	at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
-
-#endif
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@ -83,7 +83,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)

 #define AT91SAM9260_BASE_ECC	0xffffe800
@ -92,6 +91,7 @@
 #define AT91SAM9260_BASE_PIOA	0xfffff400
 #define AT91SAM9260_BASE_PIOB	0xfffff600
 #define AT91SAM9260_BASE_PIOC	0xfffff800
+#define AT91SAM9260_BASE_RSTC	0xfffffd00
 #define AT91SAM9260_BASE_SHDWC	0xfffffd10
 #define AT91SAM9260_BASE_RTT	0xfffffd20
 #define AT91SAM9260_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@ -68,7 +68,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)

 #define AT91SAM9261_BASE_SMC	0xffffec00
@ -76,6 +75,7 @@
 #define AT91SAM9261_BASE_PIOA	0xfffff400
 #define AT91SAM9261_BASE_PIOB	0xfffff600
 #define AT91SAM9261_BASE_PIOC	0xfffff800
+#define AT91SAM9261_BASE_RSTC	0xfffffd00
 #define AT91SAM9261_BASE_SHDWC	0xfffffd10
 #define AT91SAM9261_BASE_RTT	0xfffffd20
 #define AT91SAM9261_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@ -78,7 +78,6 @@
 #define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)

 #define AT91SAM9263_BASE_ECC0	0xffffe000
@ -91,6 +90,7 @@
 #define AT91SAM9263_BASE_PIOC	0xfffff600
 #define AT91SAM9263_BASE_PIOD	0xfffff800
 #define AT91SAM9263_BASE_PIOE	0xfffffa00
+#define AT91SAM9263_BASE_RSTC	0xfffffd00
 #define AT91SAM9263_BASE_SHDWC	0xfffffd10
 #define AT91SAM9263_BASE_RTT0	0xfffffd20
 #define AT91SAM9263_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@ -46,10 +46,10 @@
 #define			AT91_DDRSDRC_CAS_25	(6 << 4)
 #define		AT91_DDRSDRC_RST_DLL	(1 << 7)		/* Reset DLL */
 #define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
-#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL */
-#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver */
-#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared */
-#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y */
+#define		AT91_DDRSDRC_DIS_DLL	(1 << 9)		/* Disable DLL [SAM9 Only] */
+#define		AT91_DDRSDRC_OCD	(1 << 12)		/* Off-Chip Driver [SAM9 Only] */
+#define		AT91_DDRSDRC_DQMS	(1 << 16)		/* Mask Data is Shared [SAM9 Only] */
+#define		AT91_DDRSDRC_ACTBST	(1 << 18)		/* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */

 #define AT91_DDRSDRC_T0PR	0x0C	/* Timing 0 Register */
 #define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
@ -59,7 +59,8 @@
 #define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
 #define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
 #define		AT91_DDRSDRC_TWTR	(0x7 << 24)		/* Internal Write to Read delay */
-#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay */
+#define		AT91CAP9_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_RED_WRRD	(0x1 << 27)		/* Reduce Write to Read Delay [SAM9 Only] */
 #define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */

 #define AT91_DDRSDRC_T1PR	0x10	/* Timing 1 Register */
@ -68,13 +69,14 @@
 #define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
 #define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */

-#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register */
+#define AT91_DDRSDRC_T2PR	0x14	/* Timing 2 Register [SAM9 Only] */
 #define		AT91_DDRSDRC_TXARD	(0xf  << 0)		/* Exit active power down delay to read command in mode "Fast Exit" */
 #define		AT91_DDRSDRC_TXARDS	(0xf  << 4)		/* Exit active power down delay to read command in mode "Slow Exit" */
 #define		AT91_DDRSDRC_TRPA	(0xf  << 8)		/* Row Precharge All delay */
 #define		AT91_DDRSDRC_TRTP	(0x7  << 12)		/* Read to Precharge delay */

 #define AT91_DDRSDRC_LPR	0x1C	/* Low Power Register */
+#define AT91CAP9_DDRSDRC_LPR	0x18	/* Low Power Register */
 #define		AT91_DDRSDRC_LPCB	(3 << 0)		/* Low-power Configurations */
 #define			AT91_DDRSDRC_LPCB_DISABLE		0
 #define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
@ -92,32 +94,40 @@
 #define		AT91_DDRSDRC_UPD_MR	(3 << 20)	 /* Update load mode register and extended mode register */

 #define AT91_DDRSDRC_MDR	0x20	/* Memory Device Register */
+#define AT91CAP9_DDRSDRC_MDR	0x1C	/* Memory Device Register */
 #define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
 #define			AT91_DDRSDRC_MD_SDR		0
 #define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91CAP9_DDRSDRC_MD_DDR		2
 #define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
-#define			AT91_DDRSDRC_MD_DDR2		6
+#define			AT91_DDRSDRC_MD_DDR2		6	/* [SAM9 Only] */
 #define		AT91_DDRSDRC_DBW	(1 << 4)		/* Data Bus Width */
 #define			AT91_DDRSDRC_DBW_32BITS		(0 <<  4)
 #define			AT91_DDRSDRC_DBW_16BITS		(1 <<  4)

 #define AT91_DDRSDRC_DLL	0x24	/* DLL Information Register */
+#define AT91CAP9_DDRSDRC_DLL	0x20	/* DLL Information Register */
 #define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
 #define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
 #define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91CAP9_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91CAP9_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91CAP9_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
 #define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91CAP9_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91CAP9_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */

-#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register */
+#define AT91_DDRSDRC_HS		0x2C	/* High Speed Register [SAM9 Only] */
 #define		AT91_DDRSDRC_DIS_ATCP_RD	(1 << 2)	/* Anticip read access is disabled */

 #define AT91_DDRSDRC_DELAY(n)	(0x30 + (0x4 * (n)))	/* Delay I/O Register n */

-#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register */
+#define AT91_DDRSDRC_WPMR	0xE4	/* Write Protect Mode Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WP		(1 << 0)		/* Write protect enable */
 #define		AT91_DDRSDRC_WPKEY	(0xffffff << 8)		/* Write protect key */
 #define		AT91_DDRSDRC_KEY	(0x444452 << 8)		/* Write protect key = "DDR" */

-#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register */
+#define AT91_DDRSDRC_WPSR	0xE8	/* Write Protect Status Register [SAM9 Only] */
 #define		AT91_DDRSDRC_WPVS	(1 << 0)		/* Write protect violation status */
 #define		AT91_DDRSDRC_WPVSRC	(0xffff << 8)		/* Write protect violation source */

--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@ -18,6 +18,35 @@

 #include <mach/cpu.h>

+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+	/* Setup register */
+	u8 ncs_read_setup;
+	u8 nrd_setup;
+	u8 ncs_write_setup;
+	u8 nwe_setup;
+
+	/* Pulse register */
+	u8 ncs_read_pulse;
+	u8 nrd_pulse;
+	u8 ncs_write_pulse;
+	u8 nwe_pulse;
+
+	/* Cycle register */
+	u16 read_cycle;
+	u16 write_cycle;
+
+	/* Mode register */
+	u32 mode;
+	u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
 #define AT91_SMC_SETUP		0x00				/* Setup Register for CS n */
 #define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
 #define			AT91_SMC_NWESETUP_(x)	((x) << 0)
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@ -90,7 +90,6 @@
 #define AT91_DDRSDRC0	(0xffffe600 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)

 #define AT91SAM9G45_BASE_ECC	0xffffe200
@ -102,6 +101,7 @@
 #define AT91SAM9G45_BASE_PIOC	0xfffff600
 #define AT91SAM9G45_BASE_PIOD	0xfffff800
 #define AT91SAM9G45_BASE_PIOE	0xfffffa00
+#define AT91SAM9G45_BASE_RSTC	0xfffffd00
 #define AT91SAM9G45_BASE_SHDWC	0xfffffd10
 #define AT91SAM9G45_BASE_RTT	0xfffffd20
 #define AT91SAM9G45_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@ -72,7 +72,6 @@
 #define AT91_SDRAMC0	(0xffffea00 - AT91_BASE_SYS)
 #define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
 #define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
 #define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
 #define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)

@ -84,6 +83,7 @@
 #define AT91SAM9RL_BASE_PIOB	0xfffff600
 #define AT91SAM9RL_BASE_PIOC	0xfffff800
 #define AT91SAM9RL_BASE_PIOD	0xfffffa00
+#define AT91SAM9RL_BASE_RSTC	0xfffffd00
 #define AT91SAM9RL_BASE_SHDWC	0xfffffd10
 #define AT91SAM9RL_BASE_RTT	0xfffffd20
 #define AT91SAM9RL_BASE_PIT	0xfffffd30
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data);
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
 	int		vbus_pin[2];	/* port power-control pin */
-	u8              vbus_pin_inverted;
+	u8              vbus_pin_active_low[2];
 	u8              overcurrent_supported;
 	int             overcurrent_pin[2];
 	u8              overcurrent_status[2];
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@ -34,7 +34,6 @@
 /*
 * Show the reason for the previous system reset.
 */
-#if defined(AT91_RSTC)

 #include <mach/at91_rstc.h>
 #include <mach/at91_shdwc.h>
@ -58,10 +57,10 @@ static void __init show_reset_status(void)
 	char *reason, *r2 = reset;
 	u32 reset_type, wake_type;

-	if (!at91_shdwc_base)
+	if (!at91_shdwc_base || !at91_rstc_base)
 		return;

-	reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
+	reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
 	wake_type = at91_shdwc_read(AT91_SHDW_SR);

 	switch (reset_type) {
@ -102,10 +101,6 @@ static void __init show_reset_status(void)
 	}
 	pr_info("AT91: Starting after %s %s\n", reason, r2);
 }
-#else
-static void __init show_reset_status(void) {}
-#endif
-

 static int at91_pm_valid_state(suspend_state_t state)
 {
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void)
 								: : "r" (0))

 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
+#include <mach/at91sam9_ddrsdr.h>


 static inline u32 sdram_selfrefresh_enable(void)
 {
 	u32 saved_lpr, lpr;

-	saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);

 	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
 	return saved_lpr;
 }

-#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr)	at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
 #define wait_for_interrupt_enable()		cpu_do_idle()

 #elif defined(CONFIG_ARCH_AT91SAM9G45)
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@ -18,9 +18,8 @@

 #if defined(CONFIG_ARCH_AT91RM9200)
 #include <mach/at91rm9200_mc.h>
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+	|| defined(CONFIG_ARCH_AT91SAM9G45)
 #include <mach/at91sam9_ddrsdr.h>
 #else
 #include <mach/at91sam9_sdramc.h>
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@ -2,6 +2,7 @@
 * linux/arch/arm/mach-at91/sam9_smc.c
 *
 * Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
@ -22,7 +23,22 @@

 static void __iomem *smc_base_addr[2];

-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	__raw_writel(config->mode
+		   | AT91_SMC_TDF_(config->tdf_cycles),
+		   base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+					struct sam9_smc_config *config)
 {

 	/* Setup register */
@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con
 		   base + AT91_SMC_CYCLE);

 	/* Mode register */
-	__raw_writel(config->mode
-		   | AT91_SMC_TDF_(config->tdf_cycles),
-		   base + AT91_SMC_MODE);
+	sam9_smc_cs_write_mode(base, config);
 }

-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+					struct sam9_smc_config *config)
 {
 	sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
 }

+static void sam9_smc_cs_read_mode(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+	config->mode = (val & ~AT91_SMC_NWECYCLE);
+	config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+					struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+					struct sam9_smc_config *config)
+{
+	u32 val;
+
+	/* Setup register */
+	val = __raw_readl(base + AT91_SMC_SETUP);
+
+	config->nwe_setup = val & AT91_SMC_NWESETUP;
+	config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+	config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+	config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+	/* Pulse register */
+	val = __raw_readl(base + AT91_SMC_PULSE);
+
+	config->nwe_setup = val & AT91_SMC_NWEPULSE;
+	config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+	config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+	config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+	/* Cycle register */
+	val = __raw_readl(base + AT91_SMC_CYCLE);
+
+	config->write_cycle = val & AT91_SMC_NWECYCLE;
+	config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+	/* Mode register */
+	sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+	sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
 void __init at91sam9_ioremap_smc(int id, u32 addr)
 {
 	if (id > 1) {
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@ -8,27 +8,4 @@
 * published by the Free Software Foundation.
 */

-struct sam9_smc_config {
-	/* Setup register */
-	u8 ncs_read_setup;
-	u8 nrd_setup;
-	u8 ncs_write_setup;
-	u8 nwe_setup;
-
-	/* Pulse register */
-	u8 ncs_read_pulse;
-	u8 nrd_pulse;
-	u8 ncs_write_pulse;
-	u8 nwe_pulse;
-
-	/* Cycle register */
-	u16 read_cycle;
-	u16 write_cycle;
-
-	/* Mode register */
-	u32 mode;
-	u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
 extern void __init at91sam9_ioremap_smc(int id, u32 addr);
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata);
 void __init at91rm9200_set_type(int type)
 {
 	if (type == ARCH_REVISON_9200_PQFP)
-		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
-	else
 		at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
+	else
+		at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
+
+	pr_info("AT91: filled in soc subtype: %s\n",
+		at91_get_soc_subtype(&at91_soc_initdata));
 }

 void __init at91_init_irq_default(void)
@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr)
 	pm_power_off = at91sam9_poweroff;
 }

+void __iomem *at91_rstc_base;
+
+void __init at91_ioremap_rstc(u32 base_addr)
+{
+	at91_rstc_base = ioremap(base_addr, 16);
+	if (!at91_rstc_base)
+		panic("Impossible to ioremap at91_rstc_base\n");
+}
+
 void __init at91_initialize(unsigned long main_clock)
 {
 	at91_boot_soc.ioremap_registers();
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING")
 	.init_early = bcmring_init_early,
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
-	.init_machine = bcmring_init_machine
+	.init_machine = bcmring_init_machine,
 	.restart = bcmring_restart,
 MACHINE_END
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@ -33,17 +33,11 @@

 #include <mach/timer.h>

-#include <linux/mm.h>
 #include <linux/pfn.h>
 #include <linux/atomic.h>
 #include <linux/sched.h>
 #include <mach/dma.h>

-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
 /* ---- Public Variables ------------------------------------------------- */

 /* ---- Private Constants and Types -------------------------------------- */
@ -53,58 +47,18 @@
 #define CONTROLLER_FROM_HANDLE(handle)    (((handle) >> 4) & 0x0f)
 #define CHANNEL_FROM_HANDLE(handle)       ((handle) & 0x0f)

-#define DMA_MAP_DEBUG   0
-
-#if DMA_MAP_DEBUG
-#   define  DMA_MAP_PRINT(fmt, args...)   printk("%s: " fmt, __func__,  ## args)
-#else
-#   define  DMA_MAP_PRINT(fmt, args...)
-#endif

 /* ---- Private Variables ------------------------------------------------ */

 static DMA_Global_t gDMA;
 static struct proc_dir_entry *gDmaDir;

-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
 #include "dma_device.c"

 /* ---- Private Function Prototypes -------------------------------------- */

 /* ---- Functions  ------------------------------------------------------- */

-/****************************************************************************/
-/**
-*   Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
-				  int count, int *eof, void *data)
-{
-	int len = 0;
-
-	len += sprintf(buf + len, "dma_map_mem statistics\n");
-	len +=
-	    sprintf(buf + len, "coherent: %d\n",
-		    atomic_read(&gDmaStatMemTypeCoherent));
-	len +=
-	    sprintf(buf + len, "kmalloc:  %d\n",
-		    atomic_read(&gDmaStatMemTypeKmalloc));
-	len +=
-	    sprintf(buf + len, "vmalloc:  %d\n",
-		    atomic_read(&gDmaStatMemTypeVmalloc));
-	len +=
-	    sprintf(buf + len, "user:     %d\n",
-		    atomic_read(&gDmaStatMemTypeUser));
-
-	return len;
-}
-
 /****************************************************************************/
 /**
 *   Displays information for /proc/dma/channels
@ -846,8 +800,6 @@ int dma_init(void)
 				       dma_proc_read_channels, NULL);
 		create_proc_read_entry("devices", 0, gDmaDir,
 				       dma_proc_read_devices, NULL);
-		create_proc_read_entry("mem-type", 0, gDmaDir,
-				       dma_proc_read_mem_type, NULL);
 	}

 out:
@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev,	/* Device to set the callback for.
 }

 EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-*   Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
-	memset(memMap, 0, sizeof(*memMap));
-
-	sema_init(&memMap->lock, 1);
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-*   Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
-	down(&memMap->lock);	/* Just being paranoid */
-
-	/* Free up any allocated memory */
-
-	up(&memMap->lock);
-	memset(memMap, 0, sizeof(*memMap));
-
-	return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and categorizes it.
-*
-*   @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
-	unsigned long addrVal = (unsigned long)addr;
-
-	if (addrVal >= CONSISTENT_BASE) {
-		/* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
-		/* dma_alloc_xxx pages are physically and virtually contiguous */
-
-		return DMA_MEM_TYPE_DMA;
-	}
-
-	/* Technically, we could add one more classification. Addresses between VMALLOC_END */
-	/* and the beginning of the DMA virtual address could be considered to be I/O space. */
-	/* Right now, nobody cares about this particular classification, so we ignore it. */
-
-	if (is_vmalloc_addr(addr)) {
-		/* Address comes from the vmalloc'd region. Pages are virtually */
-		/* contiguous but NOT physically contiguous */
-
-		return DMA_MEM_TYPE_VMALLOC;
-	}
-
-	if (addrVal >= PAGE_OFFSET) {
-		/* PAGE_OFFSET is typically 0xC0000000 */
-
-		/* kmalloc'd pages are physically contiguous */
-
-		return DMA_MEM_TYPE_KMALLOC;
-	}
-
-	return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and determines if we support DMA'ing to/from
-*   that type of memory.
-*
-*   @return boolean -
-*               return value != 0 means dma supported
-*               return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
-	DMA_MemType_t memType = dma_mem_type(addr);
-
-	return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-	    || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
-	    || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		  enum dma_data_direction dir	/* Direction that the mapping will be going */
-    ) {
-	int rc;
-
-	down(&memMap->lock);
-
-	DMA_MAP_PRINT("memMap: %p\n", memMap);
-
-	if (memMap->inUse) {
-		printk(KERN_ERR "%s: memory map %p is already being used\n",
-		       __func__, memMap);
-		rc = -EBUSY;
-		goto out;
-	}
-
-	memMap->inUse = 1;
-	memMap->dir = dir;
-	memMap->numRegionsUsed = 0;
-
-	rc = 0;
-
-out:
-
-	DMA_MAP_PRINT("returning %d", rc);
-
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-*   Adds a segment of memory to a memory map. Each segment is both
-*   physically and virtually contiguous.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-			       DMA_Region_t *region,	/* Region that the segment belongs to */
-			       void *virtAddr,	/* Virtual address of the segment being added */
-			       dma_addr_t physAddr,	/* Physical address of the segment being added */
-			       size_t numBytes	/* Number of bytes of the segment being added */
-    ) {
-	DMA_Segment_t *segment;
-
-	DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
-		      physAddr, numBytes);
-
-	/* Sanity check */
-
-	if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
-	    || (((unsigned long)virtAddr + numBytes)) >
-	    ((unsigned long)region->virtAddr + region->numBytes)) {
-		printk(KERN_ERR
-		       "%s: virtAddr %p is outside region @ %p len: %d\n",
-		       __func__, virtAddr, region->virtAddr, region->numBytes);
-		return -EINVAL;
-	}
-
-	if (region->numSegmentsUsed > 0) {
-		/* Check to see if this segment is physically contiguous with the previous one */
-
-		segment = &region->segment[region->numSegmentsUsed - 1];
-
-		if ((segment->physAddr + segment->numBytes) == physAddr) {
-			/* It is - just add on to the end */
-
-			DMA_MAP_PRINT("appending %d bytes to last segment\n",
-				      numBytes);
-
-			segment->numBytes += numBytes;
-
-			return 0;
-		}
-	}
-
-	/* Reallocate to hold more segments, if required. */
-
-	if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
-		DMA_Segment_t *newSegment;
-		size_t oldSize =
-		    region->numSegmentsAllocated * sizeof(*newSegment);
-		int newAlloc = region->numSegmentsAllocated + 4;
-		size_t newSize = newAlloc * sizeof(*newSegment);
-
-		newSegment = kmalloc(newSize, GFP_KERNEL);
-		if (newSegment == NULL) {
-			return -ENOMEM;
-		}
-		memcpy(newSegment, region->segment, oldSize);
-		memset(&((uint8_t *) newSegment)[oldSize], 0,
-		       newSize - oldSize);
-		kfree(region->segment);
-
-		region->numSegmentsAllocated = newAlloc;
-		region->segment = newSegment;
-	}
-
-	segment = &region->segment[region->numSegmentsUsed];
-	region->numSegmentsUsed++;
-
-	segment->virtAddr = virtAddr;
-	segment->physAddr = physAddr;
-	segment->numBytes = numBytes;
-
-	DMA_MAP_PRINT("returning success\n");
-
-	return 0;
-}
-
-/****************************************************************************/
-/**
-*   Adds a region of memory to a memory map. Each region is virtually
-*   contiguous, but not necessarily physically contiguous.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		       void *mem,	/* Virtual address that we want to get a map of */
-		       size_t numBytes	/* Number of bytes being mapped */
-    ) {
-	unsigned long addr = (unsigned long)mem;
-	unsigned int offset;
-	int rc = 0;
-	DMA_Region_t *region;
-	dma_addr_t physAddr;
-
-	down(&memMap->lock);
-
-	DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
-	if (!memMap->inUse) {
-		printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
-		       __func__);
-		rc = -EINVAL;
-		goto out;
-	}
-
-	/* Reallocate to hold more regions. */
-
-	if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
-		DMA_Region_t *newRegion;
-		size_t oldSize =
-		    memMap->numRegionsAllocated * sizeof(*newRegion);
-		int newAlloc = memMap->numRegionsAllocated + 4;
-		size_t newSize = newAlloc * sizeof(*newRegion);
-
-		newRegion = kmalloc(newSize, GFP_KERNEL);
-		if (newRegion == NULL) {
-			rc = -ENOMEM;
-			goto out;
-		}
-		memcpy(newRegion, memMap->region, oldSize);
-		memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
-		kfree(memMap->region);
-
-		memMap->numRegionsAllocated = newAlloc;
-		memMap->region = newRegion;
-	}
-
-	region = &memMap->region[memMap->numRegionsUsed];
-	memMap->numRegionsUsed++;
-
-	offset = addr & ~PAGE_MASK;
-
-	region->memType = dma_mem_type(mem);
-	region->virtAddr = mem;
-	region->numBytes = numBytes;
-	region->numSegmentsUsed = 0;
-	region->numLockedPages = 0;
-	region->lockedPages = NULL;
-
-	switch (region->memType) {
-	case DMA_MEM_TYPE_VMALLOC:
-		{
-			atomic_inc(&gDmaStatMemTypeVmalloc);
-
-			/* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
-			/* vmalloc'd pages are not physically contiguous */
-
-			rc = -EINVAL;
-			break;
-		}
-
-	case DMA_MEM_TYPE_KMALLOC:
-		{
-			atomic_inc(&gDmaStatMemTypeKmalloc);
-
-			/* kmalloc'd pages are physically contiguous, so they'll have exactly */
-			/* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-			physAddr =
-			    dma_map_single(NULL, mem, numBytes, memMap->dir);
-			rc = dma_map_add_segment(memMap, region, mem, physAddr,
-						 numBytes);
-#else
-			rc = -EINVAL;
-#endif
-			break;
-		}
-
-	case DMA_MEM_TYPE_DMA:
-		{
-			/* dma_alloc_xxx pages are physically contiguous */
-
-			atomic_inc(&gDmaStatMemTypeCoherent);
-
-			physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
-			dma_sync_single_for_cpu(NULL, physAddr, numBytes,
-						memMap->dir);
-			rc = dma_map_add_segment(memMap, region, mem, physAddr,
-						 numBytes);
-			break;
-		}
-
-	case DMA_MEM_TYPE_USER:
-		{
-			size_t firstPageOffset;
-			size_t firstPageSize;
-			struct page **pages;
-			struct task_struct *userTask;
-
-			atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
-			/* If the pages are user pages, then the dma_mem_map_set_user_task function */
-			/* must have been previously called. */
-
-			if (memMap->userTask == NULL) {
-				printk(KERN_ERR
-				       "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
-				       __func__);
-				return -EINVAL;
-			}
-
-			/* User pages need to be locked. */
-
-			firstPageOffset =
-			    (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
-			firstPageSize = PAGE_SIZE - firstPageOffset;
-
-			region->numLockedPages = (firstPageOffset
-						  + region->numBytes +
-						  PAGE_SIZE - 1) / PAGE_SIZE;
-			pages =
-			    kmalloc(region->numLockedPages *
-				    sizeof(struct page *), GFP_KERNEL);
-
-			if (pages == NULL) {
-				region->numLockedPages = 0;
-				return -ENOMEM;
-			}
-
-			userTask = memMap->userTask;
-
-			down_read(&userTask->mm->mmap_sem);
-			rc = get_user_pages(userTask,	/* task */
-					    userTask->mm,	/* mm */
-					    (unsigned long)region->virtAddr,	/* start */
-					    region->numLockedPages,	/* len */
-					    memMap->dir == DMA_FROM_DEVICE,	/* write */
-					    0,	/* force */
-					    pages,	/* pages (array of pointers to page) */
-					    NULL);	/* vmas */
-			up_read(&userTask->mm->mmap_sem);
-
-			if (rc != region->numLockedPages) {
-				kfree(pages);
-				region->numLockedPages = 0;
-
-				if (rc >= 0) {
-					rc = -EINVAL;
-				}
-			} else {
-				uint8_t *virtAddr = region->virtAddr;
-				size_t bytesRemaining;
-				int pageIdx;
-
-				rc = 0;	/* Since get_user_pages returns +ve number */
-
-				region->lockedPages = pages;
-
-				/* We've locked the user pages. Now we need to walk them and figure */
-				/* out the physical addresses. */
-
-				/* The first page may be partial */
-
-				dma_map_add_segment(memMap,
-						    region,
-						    virtAddr,
-						    PFN_PHYS(page_to_pfn
-							     (pages[0])) +
-						    firstPageOffset,
-						    firstPageSize);
-
-				virtAddr += firstPageSize;
-				bytesRemaining =
-				    region->numBytes - firstPageSize;
-
-				for (pageIdx = 1;
-				     pageIdx < region->numLockedPages;
-				     pageIdx++) {
-					size_t bytesThisPage =
-					    (bytesRemaining >
-					     PAGE_SIZE ? PAGE_SIZE :
-					     bytesRemaining);
-
-					DMA_MAP_PRINT
-					    ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
-					     pageIdx, pages[pageIdx],
-					     page_to_pfn(pages[pageIdx]),
-					     PFN_PHYS(page_to_pfn
-						      (pages[pageIdx])));
-
-					dma_map_add_segment(memMap,
-							    region,
-							    virtAddr,
-							    PFN_PHYS(page_to_pfn
-								     (pages
-								      [pageIdx])),
-							    bytesThisPage);
-
-					virtAddr += bytesThisPage;
-					bytesRemaining -= bytesThisPage;
-				}
-			}
-#else
-			printk(KERN_ERR
-			       "%s: User mode pages are not yet supported\n",
-			       __func__);
-
-			/* user pages are not physically contiguous */
-
-			rc = -EINVAL;
-#endif
-			break;
-		}
-
-	default:
-		{
-			printk(KERN_ERR "%s: Unsupported memory type: %d\n",
-			       __func__, region->memType);
-
-			rc = -EINVAL;
-			break;
-		}
-	}
-
-	if (rc != 0) {
-		memMap->numRegionsUsed--;
-	}
-
-out:
-
-	DMA_MAP_PRINT("returning %d\n", rc);
-
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		void *mem,	/* Virtual address that we want to get a map of */
-		size_t numBytes,	/* Number of bytes being mapped */
-		enum dma_data_direction dir	/* Direction that the mapping will be going */
-    ) {
-	int rc;
-
-	rc = dma_map_start(memMap, dir);
-	if (rc == 0) {
-		rc = dma_map_add_region(memMap, mem, numBytes);
-		if (rc < 0) {
-			/* Since the add fails, this function will fail, and the caller won't */
-			/* call unmap, so we need to do it here. */
-
-			dma_unmap(memMap, 0);
-		}
-	}
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-*   Setup a descriptor ring for a given memory map.
-*
-*   It is assumed that the descriptor ring has already been initialized, and
-*   this routine will only reallocate a new descriptor ring if the existing
-*   one is too small.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
-				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
-				   dma_addr_t devPhysAddr	/* Physical address of device */
-    ) {
-	int rc;
-	int numDescriptors;
-	DMA_DeviceAttribute_t *devAttr;
-	DMA_Region_t *region;
-	DMA_Segment_t *segment;
-	dma_addr_t srcPhysAddr;
-	dma_addr_t dstPhysAddr;
-	int regionIdx;
-	int segmentIdx;
-
-	devAttr = &DMA_gDeviceAttribute[dev];
-
-	down(&memMap->lock);
-
-	/* Figure out how many descriptors we need */
-
-	numDescriptors = 0;
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			if (memMap->dir == DMA_TO_DEVICE) {
-				srcPhysAddr = segment->physAddr;
-				dstPhysAddr = devPhysAddr;
-			} else {
-				srcPhysAddr = devPhysAddr;
-				dstPhysAddr = segment->physAddr;
-			}
-
-			rc =
-			     dma_calculate_descriptor_count(dev, srcPhysAddr,
-							    dstPhysAddr,
-							    segment->
-							    numBytes);
-			if (rc < 0) {
-				printk(KERN_ERR
-				       "%s: dma_calculate_descriptor_count failed: %d\n",
-				       __func__, rc);
-				goto out;
-			}
-			numDescriptors += rc;
-		}
-	}
-
-	/* Adjust the size of the ring, if it isn't big enough */
-
-	if (numDescriptors > devAttr->ring.descriptorsAllocated) {
-		dma_free_descriptor_ring(&devAttr->ring);
-		rc =
-		     dma_alloc_descriptor_ring(&devAttr->ring,
-					       numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_alloc_descriptor_ring failed: %d\n",
-			       __func__, rc);
-			goto out;
-		}
-	} else {
-		rc =
-		     dma_init_descriptor_ring(&devAttr->ring,
-					      numDescriptors);
-		if (rc < 0) {
-			printk(KERN_ERR
-			       "%s: dma_init_descriptor_ring failed: %d\n",
-			       __func__, rc);
-			goto out;
-		}
-	}
-
-	/* Populate the descriptors */
-
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			if (memMap->dir == DMA_TO_DEVICE) {
-				srcPhysAddr = segment->physAddr;
-				dstPhysAddr = devPhysAddr;
-			} else {
-				srcPhysAddr = devPhysAddr;
-				dstPhysAddr = segment->physAddr;
-			}
-
-			rc =
-			     dma_add_descriptors(&devAttr->ring, dev,
-						 srcPhysAddr, dstPhysAddr,
-						 segment->numBytes);
-			if (rc < 0) {
-				printk(KERN_ERR
-				       "%s: dma_add_descriptors failed: %d\n",
-				       __func__, rc);
-				goto out;
-			}
-		}
-	}
-
-	rc = 0;
-
-out:
-
-	up(&memMap->lock);
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-	      int dirtied	/* non-zero if any of the pages were modified */
-    ) {
-
-	int rc = 0;
-	int regionIdx;
-	int segmentIdx;
-	DMA_Region_t *region;
-	DMA_Segment_t *segment;
-
-	down(&memMap->lock);
-
-	for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
-		region = &memMap->region[regionIdx];
-
-		for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
-		     segmentIdx++) {
-			segment = &region->segment[segmentIdx];
-
-			switch (region->memType) {
-			case DMA_MEM_TYPE_VMALLOC:
-				{
-					printk(KERN_ERR
-					       "%s: vmalloc'd pages are not yet supported\n",
-					       __func__);
-					rc = -EINVAL;
-					goto out;
-				}
-
-			case DMA_MEM_TYPE_KMALLOC:
-				{
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
-					dma_unmap_single(NULL,
-							 segment->physAddr,
-							 segment->numBytes,
-							 memMap->dir);
-#endif
-					break;
-				}
-
-			case DMA_MEM_TYPE_DMA:
-				{
-					dma_sync_single_for_cpu(NULL,
-								segment->
-								physAddr,
-								segment->
-								numBytes,
-								memMap->dir);
-					break;
-				}
-
-			case DMA_MEM_TYPE_USER:
-				{
-					/* Nothing to do here. */
-
-					break;
-				}
-
-			default:
-				{
-					printk(KERN_ERR
-					       "%s: Unsupported memory type: %d\n",
-					       __func__, region->memType);
-					rc = -EINVAL;
-					goto out;
-				}
-			}
-
-			segment->virtAddr = NULL;
-			segment->physAddr = 0;
-			segment->numBytes = 0;
-		}
-
-		if (region->numLockedPages > 0) {
-			int pageIdx;
-
-			/* Some user pages were locked. We need to go and unlock them now. */
-
-			for (pageIdx = 0; pageIdx < region->numLockedPages;
-			     pageIdx++) {
-				struct page *page =
-				    region->lockedPages[pageIdx];
-
-				if (memMap->dir == DMA_FROM_DEVICE) {
-					SetPageDirty(page);
-				}
-				page_cache_release(page);
-			}
-			kfree(region->lockedPages);
-			region->numLockedPages = 0;
-			region->lockedPages = NULL;
-		}
-
-		region->memType = DMA_MEM_TYPE_NONE;
-		region->virtAddr = NULL;
-		region->numBytes = 0;
-		region->numSegmentsUsed = 0;
-	}
-	memMap->userTask = NULL;
-	memMap->numRegionsUsed = 0;
-	memMap->inUse = 0;
-
-out:
-	up(&memMap->lock);
-
-	return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@ -26,15 +26,9 @@
 /* ---- Include Files ---------------------------------------------------- */

 #include <linux/kernel.h>
-#include <linux/wait.h>
 #include <linux/semaphore.h>
 #include <csp/dmacHw.h>
 #include <mach/timer.h>
-#include <linux/scatterlist.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>

 /* ---- Constants and Types ---------------------------------------------- */

@ -111,78 +105,6 @@ typedef struct {

 } DMA_DescriptorRing_t;

-/****************************************************************************
-*
-*   The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-*   DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE    4096	/* Pages less than this size are better */
-					/* off not being DMA'd. */
-
-typedef enum {
-	DMA_MEM_TYPE_NONE,	/* Not a valid setting */
-	DMA_MEM_TYPE_VMALLOC,	/* Memory came from vmalloc call */
-	DMA_MEM_TYPE_KMALLOC,	/* Memory came from kmalloc call */
-	DMA_MEM_TYPE_DMA,	/* Memory came from dma_alloc_xxx call */
-	DMA_MEM_TYPE_USER,	/* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
-	void *virtAddr;		/* Virtual address used for this segment */
-	dma_addr_t physAddr;	/* Physical address this segment maps to */
-	size_t numBytes;	/* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
-	DMA_MemType_t memType;
-	void *virtAddr;
-	size_t numBytes;
-
-	/* Each region (virtually contiguous) consists of one or more segments. Each */
-	/* segment is virtually and physically contiguous. */
-
-	int numSegmentsUsed;
-	int numSegmentsAllocated;
-	DMA_Segment_t *segment;
-
-	/* When a region corresponds to user memory, we need to lock all of the pages */
-	/* down before we can figure out the physical addresses. The lockedPage array contains */
-	/* the pages that were locked, and which subsequently need to be unlocked once the */
-	/* memory is unmapped. */
-
-	unsigned numLockedPages;
-	struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
-	int inUse;		/* Is this mapping currently being used? */
-	struct semaphore lock;	/* Acquired when using this structure */
-	enum dma_data_direction dir;	/* Direction this transfer is intended for */
-
-	/* In the event that we're mapping user memory, we need to know which task */
-	/* the memory is for, so that we can obtain the correct mm locks. */
-
-	struct task_struct *userTask;
-
-	int numRegionsUsed;
-	int numRegionsAllocated;
-	DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
 /****************************************************************************
 *
 *   The DMA_DeviceAttribute_t contains information which describes a
@ -568,124 +490,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle,	/* DMA Handle */
 				     size_t numBytes	/* Number of bytes in each destination buffer */
    );

-/****************************************************************************/
-/**
-*   Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
-    );
-
-/****************************************************************************/
-/**
-*   Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap	/* Stores state information about the map */
-    );
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and categorizes it.
-*
-*   @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-*   Sets the process (aka userTask) associated with a mem map. This is
-*   required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
-					     struct task_struct *task)
-{
-	memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-*   Looks at a memory address and determines if we support DMA'ing to/from
-*   that type of memory.
-*
-*   @return boolean -
-*               return value != 0 means dma supported
-*               return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-*   Initializes a memory map for use. Since this function acquires a
-*   sempaphore within the memory map, it is VERY important that dma_unmap
-*   be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		  enum dma_data_direction dir	/* Direction that the mapping will be going */
-    );
-
-/****************************************************************************/
-/**
-*   Adds a segment of memory to a memory map.
-*
-*   @return     0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		       void *mem,	/* Virtual address that we want to get a map of */
-		       size_t numBytes	/* Number of bytes being mapped */
-    );
-
-/****************************************************************************/
-/**
-*   Creates a descriptor ring from a memory mapping.
-*
-*   @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev,	/* DMA device (where the ring is stored) */
-				   DMA_MemMap_t *memMap,	/* Memory map that will be used */
-				   dma_addr_t devPhysAddr	/* Physical address of device */
-    );
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-		void *addr,	/* Virtual address that we want to get a map of */
-		size_t count,	/* Number of bytes being mapped */
-		enum dma_data_direction dir	/* Direction that the mapping will be going */
-    );
-
-/****************************************************************************/
-/**
-*   Maps in a memory region such that it can be used for performing a DMA.
-*
-*   @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap,	/* Stores state information about the map */
-	      int dirtied	/* non-zero if any of the pages were modified */
-    );
-
 /****************************************************************************/
 /**
 *   Initiates a transfer when the descriptors have already been setup.
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@ -44,7 +44,7 @@
 #include <mach/aemif.h>
 #include <mach/spi.h>

-#define DA850_EVM_PHY_ID		"0:00"
+#define DA850_EVM_PHY_ID		"davinci_mdio-0:00"
 #define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)

--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@ -54,7 +54,7 @@ static inline int have_tvp7002(void)
 	return 0;
 }

-#define DM365_EVM_PHY_ID		"0:01"
+#define DM365_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
 * A MAX-II CPLD is used for various board control functions.
 */
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@ -40,7 +40,7 @@
 #include <mach/usb.h>
 #include <mach/aemif.h>

-#define DM644X_EVM_PHY_ID		"0:01"
+#define DM644X_EVM_PHY_ID		"davinci_mdio-0:01"
 #define LXT971_PHY_ID	(0x001378e2)
 #define LXT971_PHY_MASK	(0xfffffff0)

--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };

-#define DM646X_EVM_PHY_ID		"0:01"
+#define DM646X_EVM_PHY_ID		"davinci_mdio-0:01"
 /*
 * The following EDMA channels/slots are not being used by drivers (for
 * example: Timer, GPIO, UART events etc) on dm646x, hence they are being
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@ -39,7 +39,7 @@
 #include <mach/mmc.h>
 #include <mach/usb.h>

-#define NEUROS_OSD2_PHY_ID		"0:01"
+#define NEUROS_OSD2_PHY_ID		"davinci_mdio-0:01"
 #define LXT971_PHY_ID			0x001378e2
 #define LXT971_PHY_MASK			0xfffffff0

--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@ -21,7 +21,7 @@
 #include <mach/da8xx.h>
 #include <mach/mux.h>

-#define HAWKBOARD_PHY_ID		"0:07"
+#define HAWKBOARD_PHY_ID		"davinci_mdio-0:07"
 #define DA850_HAWK_MMCSD_CD_PIN		GPIO_TO_PIN(3, 12)
 #define DA850_HAWK_MMCSD_WP_PIN		GPIO_TO_PIN(3, 13)

--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@ -42,7 +42,7 @@
 #include <mach/mux.h>
 #include <mach/usb.h>

-#define SFFSDR_PHY_ID		"0:01"
+#define SFFSDR_PHY_ID		"davinci_mdio-0:01"
 static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
 	/* U-Boot Environment: Block 0
 	 * UBL:                Block 1
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = {
 	.div_reg	= PLLDIV3,
 };

-static struct clk pll1_sysclk4 = {
-	.name		= "pll1_sysclk4",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
-	.name		= "pll1_sysclk5",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
-	.name		= "pll0_sysclk6",
-	.parent		= &pll0_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
-	.name		= "pll1_sysclk7",
-	.parent		= &pll1_clk,
-	.flags		= CLK_PLL,
-	.div_reg	= PLLDIV7,
-};
-
 static struct clk i2c0_clk = {
 	.name		= "i2c0",
 	.parent		= &pll0_aux_clk,
@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = {
 	CLK(NULL,		"pll1_aux",	&pll1_aux_clk),
 	CLK(NULL,		"pll1_sysclk2",	&pll1_sysclk2),
 	CLK(NULL,		"pll1_sysclk3",	&pll1_sysclk3),
-	CLK(NULL,		"pll1_sysclk4",	&pll1_sysclk4),
-	CLK(NULL,		"pll1_sysclk5",	&pll1_sysclk5),
-	CLK(NULL,		"pll1_sysclk6",	&pll1_sysclk6),
-	CLK(NULL,		"pll1_sysclk7",	&pll1_sysclk7),
 	CLK("i2c_davinci.1",	NULL,		&i2c0_clk),
 	CLK(NULL,		"timer0",	&timerp64_0_clk),
 	CLK("watchdog",		NULL,		&timerp64_1_clk),
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@ -28,6 +28,7 @@
 #include <asm/mach/arch.h>
 #include <linux/irq.h>
 #include <plat/time.h>
+#include <plat/ehci-orion.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
 #include "common.h"
@ -71,7 +72,7 @@ void __init dove_map_io(void)
 ****************************************************************************/
 void __init dove_ehci0_init(void)
 {
-	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+	orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
 }

 /*****************************************************************************
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@ -817,23 +817,12 @@ void __init ep93xx_register_i2s(void)
 #define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
 					 EP93XX_SYSCON_I2SCLKDIV_SPOL)

-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+int ep93xx_i2s_acquire(void)
 {
 	unsigned val;

-	/* Sanity check */
-	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
-		return -EINVAL;
-	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
-		return -EINVAL;
-
-	/* Must have only one of I2SONSSP/I2SONAC97 set */
-	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
-	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
-		return -EINVAL;
-
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
-	ep93xx_devcfg_set_bits(i2s_pins);
+	ep93xx_devcfg_set_clear(EP93XX_SYSCON_DEVCFG_I2SONAC97,
+			EP93XX_SYSCON_DEVCFG_I2S_MASK);

 	/*
 	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
@ -843,7 +832,7 @@ int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
 	 */
 	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
 	val &= ~EP93XX_I2SCLKDIV_MASK;
-	val |= i2s_config;
+	val |= EP93XX_SYSCON_I2SCLKDIV_ORIDE | EP93XX_SYSCON_I2SCLKDIV_SPOL;
 	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);

 	return 0;
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@ -59,7 +59,7 @@ void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 void ep93xx_register_i2s(void);
-int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+int ep93xx_i2s_acquire(void);
 void ep93xx_i2s_release(void);
 void ep93xx_register_ac97(void);

--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@ -32,6 +32,7 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>

 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x74),
 		.platform_data	= &pca953x_74_gpio_data,
-		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
 	}, {
 		I2C_BOARD_INFO("pca9539", 0x75),
 		.platform_data	= &pca953x_75_gpio_data,
@ -348,6 +348,8 @@ static void __init vision_init_machine(void)
 				"pca9539:74"))
 		pr_warn("cannot request interrupt gpio for pca9539:74\n");

+	vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
 	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@ -32,6 +32,7 @@

 #include "common.h"

+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),
@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
 };
+#endif

 static struct clksrc_clk *sysclks[] = {
 	/* nothing here yet */
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@ -32,12 +32,14 @@

 #include "common.h"

+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),
 	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
 	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
 };
+#endif

 static struct clk *clk_src_mpll_user_list[] = {
 	[0] = &clk_fin_mpll,
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@ -30,6 +30,7 @@

 #include "common.h"

+#ifdef CONFIG_PM_SLEEP
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
 	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
 };
+#endif

 struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@ -16,6 +16,7 @@
 #include <linux/io.h>

 #include <asm/cacheflush.h>
+#include <asm/smp_plat.h>

 #include <mach/regs-pmu.h>

--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@ -15,11 +15,13 @@
 #include <linux/serial_core.h>

 #include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
 #include <mach/map.h>

 #include <plat/cpu.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
+
+#include "common.h"

 /*
 * The following lookup table is used to override device names when devices
@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {

 static void __init exynos4210_dt_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 }

@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
 	/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
 	.init_irq	= exynos4_init_irq,
 	.map_io		= exynos4210_dt_map_io,
+	.handle_irq	= gic_handle_irq,
 	.init_machine	= exynos4210_dt_machine_init,
 	.timer		= &exynos4_timer,
 	.dt_compat	= exynos4210_dt_compat,
+	.restart        = exynos4_restart,
 MACHINE_END
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = {
 		.lower_margin	= 1,
 		.hsync_len	= 48,
 		.vsync_len	= 3,
-		.xres		= 1280,
-		.yres		= 800,
+		.xres		= 1024,
+		.yres		= 600,
 		.refresh	= 60,
 	},
 	.max_bpp	= 24,
 	.default_bpp	= 16,
-	.virtual_x	= 1280,
-	.virtual_y	= 800,
+	.virtual_x	= 1024,
+	.virtual_y	= 2 * 600,
 };

 static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
 		.bus_type	= FIMC_MIPI_CSI2,
 		.board_info	= &m5mols_board_info,
 		.i2c_bus_num	= 0,
-		.clk_frequency	= 21600000UL,
+		.clk_frequency	= 24000000UL,
 		.csi_data_align	= 32,
 	},
 };
--- a/Show More
+++ b/Show More