[POWERPC] Update MPC8610 HPCD to support audio drivers
Update the MPC8610 HPCD files to support the audio driver. Update booting-without-of.txt with information on the SSI device. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This commit is contained in:
Timur Tabi
Kumar Gala
parent
b0bbad6068
commit
c7d24a2dd0
|
|
@ -56,6 +56,7 @@ Table of Contents
|
|||
m) Chipselect/Local Bus
|
||||
n) 4xx/Axon EMAC ethernet nodes
|
||||
o) Xilinx IP cores
|
||||
p) Freescale Synchronous Serial Interface
|
||||
|
||||
VII - Specifying interrupt information for devices
|
||||
1) interrupts property
|
||||
|
|
@ -2575,6 +2576,46 @@ platforms are moved over to use the flattened-device-tree model.
|
|||
Requred properties:
|
||||
- current-speed : Baud rate of uartlite
|
||||
|
||||
p) Freescale Synchronous Serial Interface
|
||||
|
||||
The SSI is a serial device that communicates with audio codecs. It can
|
||||
be programmed in AC97, I2S, left-justified, or right-justified modes.
|
||||
|
||||
Required properties:
|
||||
- compatible : compatible list, containing "fsl,ssi"
|
||||
- cell-index : the SSI, <0> = SSI1, <1> = SSI2, and so on
|
||||
- reg : offset and length of the register set for the device
|
||||
- interrupts : <a b> where a is the interrupt number and b is a
|
||||
field that represents an encoding of the sense and
|
||||
level information for the interrupt. This should be
|
||||
encoded based on the information in section 2)
|
||||
depending on the type of interrupt controller you
|
||||
have.
|
||||
- interrupt-parent : the phandle for the interrupt controller that
|
||||
services interrupts for this device.
|
||||
- fsl,mode : the operating mode for the SSI interface
|
||||
"i2s-slave" - I2S mode, SSI is clock slave
|
||||
"i2s-master" - I2S mode, SSI is clock master
|
||||
"lj-slave" - left-justified mode, SSI is clock slave
|
||||
"lj-master" - l.j. mode, SSI is clock master
|
||||
"rj-slave" - right-justified mode, SSI is clock slave
|
||||
"rj-master" - r.j., SSI is clock master
|
||||
"ac97-slave" - AC97 mode, SSI is clock slave
|
||||
"ac97-master" - AC97 mode, SSI is clock master
|
||||
|
||||
Optional properties:
|
||||
- codec-handle : phandle to a 'codec' node that defines an audio
|
||||
codec connected to this SSI. This node is typically
|
||||
a child of an I2C or other control node.
|
||||
|
||||
Child 'codec' node required properties:
|
||||
- compatible : compatible list, contains the name of the codec
|
||||
|
||||
Child 'codec' node optional properties:
|
||||
- clock-frequency : The frequency of the input clock, which typically
|
||||
comes from an on-board dedicated oscillator.
|
||||
|
||||
|
||||
More devices will be defined as this spec matures.
|
||||
|
||||
VII - Specifying interrupt information for devices
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* MPC8610 HPCD Device Tree Source
|
||||
*
|
||||
* Copyright 2007 Freescale Semiconductor Inc.
|
||||
* Copyright 2007-2008 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License Version 2 as published
|
||||
|
|
@ -49,6 +49,7 @@
|
|||
#size-cells = <1>;
|
||||
#interrupt-cells = <2>;
|
||||
device_type = "soc";
|
||||
compatible = "fsl,mpc8610-immr", "simple-bus";
|
||||
ranges = <0 e0000000 00100000>;
|
||||
reg = <e0000000 1000>;
|
||||
bus-frequency = <0>;
|
||||
|
|
@ -62,6 +63,13 @@
|
|||
interrupts = <2b 2>;
|
||||
interrupt-parent = <&mpic>;
|
||||
dfsrr;
|
||||
|
||||
cs4270:codec@4f {
|
||||
compatible = "cirrus,cs4270";
|
||||
reg = <4f>;
|
||||
/* MCLK source is a stand-alone oscillator */
|
||||
clock-frequency = <bb8000>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@3100 {
|
||||
|
|
@ -111,6 +119,109 @@
|
|||
reg = <e0000 1000>;
|
||||
fsl,has-rstcr;
|
||||
};
|
||||
|
||||
i2s@16000 {
|
||||
compatible = "fsl,mpc8610-ssi";
|
||||
cell-index = <0>;
|
||||
reg = <16000 100>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3e 2>;
|
||||
fsl,mode = "i2s-slave";
|
||||
codec-handle = <&cs4270>;
|
||||
};
|
||||
|
||||
ssi@16100 {
|
||||
compatible = "fsl,mpc8610-ssi";
|
||||
cell-index = <1>;
|
||||
reg = <16100 100>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3f 2>;
|
||||
};
|
||||
|
||||
dma@21300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
|
||||
cell-index = <0>;
|
||||
reg = <21300 4>; /* DMA general status register */
|
||||
ranges = <0 21100 200>;
|
||||
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
cell-index = <0>;
|
||||
reg = <0 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <14 2>;
|
||||
};
|
||||
dma-channel@1 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
cell-index = <1>;
|
||||
reg = <80 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <15 2>;
|
||||
};
|
||||
dma-channel@2 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
cell-index = <2>;
|
||||
reg = <100 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <16 2>;
|
||||
};
|
||||
dma-channel@3 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,eloplus-dma-channel";
|
||||
cell-index = <3>;
|
||||
reg = <180 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <17 2>;
|
||||
};
|
||||
};
|
||||
|
||||
dma@c300 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
|
||||
cell-index = <1>;
|
||||
reg = <c300 4>; /* DMA general status register */
|
||||
ranges = <0 c100 200>;
|
||||
|
||||
dma-channel@0 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,mpc8540-dma-channel";
|
||||
cell-index = <0>;
|
||||
reg = <0 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3c 2>;
|
||||
};
|
||||
dma-channel@1 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,mpc8540-dma-channel";
|
||||
cell-index = <1>;
|
||||
reg = <80 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3d 2>;
|
||||
};
|
||||
dma-channel@2 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,mpc8540-dma-channel";
|
||||
cell-index = <2>;
|
||||
reg = <100 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3e 2>;
|
||||
};
|
||||
dma-channel@3 {
|
||||
compatible = "fsl,mpc8610-dma-channel",
|
||||
"fsl,mpc8540-dma-channel";
|
||||
cell-index = <3>;
|
||||
reg = <180 80>;
|
||||
interrupt-parent = <&mpic>;
|
||||
interrupts = <3f 2>;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
pci0: pci@e0008000 {
|
||||
|
|
|
|||
|
|
@ -696,7 +696,7 @@ CONFIG_SERIAL_8250_RSA=y
|
|||
CONFIG_SERIAL_CORE=y
|
||||
CONFIG_SERIAL_CORE_CONSOLE=y
|
||||
# CONFIG_SERIAL_JSM is not set
|
||||
CONFIG_SERIAL_OF_PLATFORM=y
|
||||
# CONFIG_SERIAL_OF_PLATFORM is not set
|
||||
CONFIG_UNIX98_PTYS=y
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
# CONFIG_IPMI_HANDLER is not set
|
||||
|
|
@ -708,7 +708,60 @@ CONFIG_UNIX98_PTYS=y
|
|||
# CONFIG_RAW_DRIVER is not set
|
||||
# CONFIG_TCG_TPM is not set
|
||||
CONFIG_DEVPORT=y
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
# CONFIG_I2C_CHARDEV is not set
|
||||
|
||||
#
|
||||
# I2C Algorithms
|
||||
#
|
||||
# CONFIG_I2C_ALGOBIT is not set
|
||||
# CONFIG_I2C_ALGOPCF is not set
|
||||
# CONFIG_I2C_ALGOPCA is not set
|
||||
|
||||
#
|
||||
# I2C Hardware Bus support
|
||||
#
|
||||
# CONFIG_I2C_ALI1535 is not set
|
||||
# CONFIG_I2C_ALI1563 is not set
|
||||
# CONFIG_I2C_ALI15X3 is not set
|
||||
# CONFIG_I2C_AMD756 is not set
|
||||
# CONFIG_I2C_AMD8111 is not set
|
||||
# CONFIG_I2C_I801 is not set
|
||||
# CONFIG_I2C_I810 is not set
|
||||
# CONFIG_I2C_PIIX4 is not set
|
||||
CONFIG_I2C_MPC=y
|
||||
# CONFIG_I2C_NFORCE2 is not set
|
||||
# CONFIG_I2C_OCORES is not set
|
||||
# CONFIG_I2C_PARPORT_LIGHT is not set
|
||||
# CONFIG_I2C_PROSAVAGE is not set
|
||||
# CONFIG_I2C_SAVAGE4 is not set
|
||||
# CONFIG_I2C_SIMTEC is not set
|
||||
# CONFIG_I2C_SIS5595 is not set
|
||||
# CONFIG_I2C_SIS630 is not set
|
||||
# CONFIG_I2C_SIS96X is not set
|
||||
# CONFIG_I2C_TAOS_EVM is not set
|
||||
# CONFIG_I2C_VIA is not set
|
||||
# CONFIG_I2C_VIAPRO is not set
|
||||
# CONFIG_I2C_VOODOO3 is not set
|
||||
|
||||
#
|
||||
# Miscellaneous I2C Chip support
|
||||
#
|
||||
# CONFIG_SENSORS_DS1337 is not set
|
||||
# CONFIG_SENSORS_DS1374 is not set
|
||||
# CONFIG_DS1682 is not set
|
||||
# CONFIG_SENSORS_EEPROM is not set
|
||||
# CONFIG_SENSORS_PCF8574 is not set
|
||||
# CONFIG_SENSORS_PCA9539 is not set
|
||||
# CONFIG_SENSORS_PCF8591 is not set
|
||||
# CONFIG_SENSORS_M41T00 is not set
|
||||
# CONFIG_SENSORS_MAX6875 is not set
|
||||
# CONFIG_SENSORS_TSL2550 is not set
|
||||
# CONFIG_I2C_DEBUG_CORE is not set
|
||||
# CONFIG_I2C_DEBUG_ALGO is not set
|
||||
# CONFIG_I2C_DEBUG_BUS is not set
|
||||
# CONFIG_I2C_DEBUG_CHIP is not set
|
||||
|
||||
#
|
||||
# SPI support
|
||||
|
|
@ -763,7 +816,119 @@ CONFIG_DUMMY_CONSOLE=y
|
|||
#
|
||||
# Sound
|
||||
#
|
||||
# CONFIG_SOUND is not set
|
||||
CONFIG_SOUND=y
|
||||
|
||||
#
|
||||
# Advanced Linux Sound Architecture
|
||||
#
|
||||
CONFIG_SND=y
|
||||
CONFIG_SND_TIMER=y
|
||||
CONFIG_SND_PCM=y
|
||||
# CONFIG_SND_SEQUENCER is not set
|
||||
CONFIG_SND_OSSEMUL=y
|
||||
CONFIG_SND_MIXER_OSS=y
|
||||
CONFIG_SND_PCM_OSS=y
|
||||
# CONFIG_SND_PCM_OSS_PLUGINS is not set
|
||||
# CONFIG_SND_DYNAMIC_MINORS is not set
|
||||
# CONFIG_SND_SUPPORT_OLD_API is not set
|
||||
CONFIG_SND_VERBOSE_PROCFS=y
|
||||
# CONFIG_SND_VERBOSE_PRINTK is not set
|
||||
# CONFIG_SND_DEBUG is not set
|
||||
|
||||
#
|
||||
# Generic devices
|
||||
#
|
||||
# CONFIG_SND_DUMMY is not set
|
||||
# CONFIG_SND_MTPAV is not set
|
||||
# CONFIG_SND_SERIAL_U16550 is not set
|
||||
# CONFIG_SND_MPU401 is not set
|
||||
|
||||
#
|
||||
# PCI devices
|
||||
#
|
||||
# CONFIG_SND_AD1889 is not set
|
||||
# CONFIG_SND_ALS300 is not set
|
||||
# CONFIG_SND_ALS4000 is not set
|
||||
# CONFIG_SND_ALI5451 is not set
|
||||
# CONFIG_SND_ATIIXP is not set
|
||||
# CONFIG_SND_ATIIXP_MODEM is not set
|
||||
# CONFIG_SND_AU8810 is not set
|
||||
# CONFIG_SND_AU8820 is not set
|
||||
# CONFIG_SND_AU8830 is not set
|
||||
# CONFIG_SND_AZT3328 is not set
|
||||
# CONFIG_SND_BT87X is not set
|
||||
# CONFIG_SND_CA0106 is not set
|
||||
# CONFIG_SND_CMIPCI is not set
|
||||
# CONFIG_SND_CS4281 is not set
|
||||
# CONFIG_SND_CS46XX is not set
|
||||
# CONFIG_SND_CS5530 is not set
|
||||
# CONFIG_SND_DARLA20 is not set
|
||||
# CONFIG_SND_GINA20 is not set
|
||||
# CONFIG_SND_LAYLA20 is not set
|
||||
# CONFIG_SND_DARLA24 is not set
|
||||
# CONFIG_SND_GINA24 is not set
|
||||
# CONFIG_SND_LAYLA24 is not set
|
||||
# CONFIG_SND_MONA is not set
|
||||
# CONFIG_SND_MIA is not set
|
||||
# CONFIG_SND_ECHO3G is not set
|
||||
# CONFIG_SND_INDIGO is not set
|
||||
# CONFIG_SND_INDIGOIO is not set
|
||||
# CONFIG_SND_INDIGODJ is not set
|
||||
# CONFIG_SND_EMU10K1 is not set
|
||||
# CONFIG_SND_EMU10K1X is not set
|
||||
# CONFIG_SND_ENS1370 is not set
|
||||
# CONFIG_SND_ENS1371 is not set
|
||||
# CONFIG_SND_ES1938 is not set
|
||||
# CONFIG_SND_ES1968 is not set
|
||||
# CONFIG_SND_FM801 is not set
|
||||
# CONFIG_SND_HDA_INTEL is not set
|
||||
# CONFIG_SND_HDSP is not set
|
||||
# CONFIG_SND_HDSPM is not set
|
||||
# CONFIG_SND_ICE1712 is not set
|
||||
# CONFIG_SND_ICE1724 is not set
|
||||
# CONFIG_SND_INTEL8X0 is not set
|
||||
# CONFIG_SND_INTEL8X0M is not set
|
||||
# CONFIG_SND_KORG1212 is not set
|
||||
# CONFIG_SND_MAESTRO3 is not set
|
||||
# CONFIG_SND_MIXART is not set
|
||||
# CONFIG_SND_NM256 is not set
|
||||
# CONFIG_SND_PCXHR is not set
|
||||
# CONFIG_SND_RIPTIDE is not set
|
||||
# CONFIG_SND_RME32 is not set
|
||||
# CONFIG_SND_RME96 is not set
|
||||
# CONFIG_SND_RME9652 is not set
|
||||
# CONFIG_SND_SONICVIBES is not set
|
||||
# CONFIG_SND_TRIDENT is not set
|
||||
# CONFIG_SND_VIA82XX is not set
|
||||
# CONFIG_SND_VIA82XX_MODEM is not set
|
||||
# CONFIG_SND_VX222 is not set
|
||||
# CONFIG_SND_YMFPCI is not set
|
||||
|
||||
#
|
||||
# ALSA PowerMac devices
|
||||
#
|
||||
|
||||
#
|
||||
# ALSA PowerPC devices
|
||||
#
|
||||
|
||||
#
|
||||
# System on Chip audio support
|
||||
#
|
||||
CONFIG_SND_SOC=y
|
||||
|
||||
#
|
||||
# SoC Audio support for SuperH
|
||||
#
|
||||
|
||||
#
|
||||
# ALSA SoC audio for Freescale SOCs
|
||||
#
|
||||
CONFIG_SND_SOC_MPC8610=y
|
||||
CONFIG_SND_SOC_MPC8610_HPCD=y
|
||||
CONFIG_SND_SOC_CS4270=y
|
||||
CONFIG_SND_SOC_CS4270_VD33_ERRATA=y
|
||||
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HID=y
|
||||
# CONFIG_HID_DEBUG is not set
|
||||
|
|
|
|||
|
|
@ -34,9 +34,24 @@
|
|||
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <linux/of_platform.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
#include <sysdev/fsl_soc.h>
|
||||
|
||||
static struct of_device_id __initdata mpc8610_ids[] = {
|
||||
{ .compatible = "fsl,mpc8610-immr", },
|
||||
{}
|
||||
};
|
||||
|
||||
static int __init mpc8610_declare_of_platform_devices(void)
|
||||
{
|
||||
/* Without this call, the SSI device driver won't get probed. */
|
||||
of_platform_bus_probe(NULL, mpc8610_ids, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
|
||||
|
||||
void __init
|
||||
mpc86xx_hpcd_init_irq(void)
|
||||
{
|
||||
|
|
|
|||
Reference in New Issue