dect
/
linux-2.6
Archived
13
0
Fork 0

[SCSI] mptfusion - mapping fixs required support for transport layers.

This utilizes the hostdata area that is hung off of scsi_target and
scsi_device for saving unique firmware mapping. This will be required
for supporting new Fibre and SPI transport support.

This also fixs problems in error handling error code for SAS
controllers, in which the incorrect mapping was passed to the
firmware.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
Moore, Eric Dean 2005-11-16 18:54:25 -07:00 committed by James Bottomley
parent f2ea8671a8
commit c7c82987b4
7 changed files with 417 additions and 423 deletions

View File

@ -321,7 +321,7 @@ typedef struct _SYSIF_REGS
* Dynamic Multi-Pathing specific stuff...
*/
/* VirtDevice negoFlags field */
/* VirtTarget negoFlags field */
#define MPT_TARGET_NO_NEGO_WIDE 0x01
#define MPT_TARGET_NO_NEGO_SYNC 0x02
#define MPT_TARGET_NO_NEGO_QAS 0x04
@ -330,8 +330,7 @@ typedef struct _SYSIF_REGS
/*
* VirtDevice - FC LUN device or SCSI target device
*/
typedef struct _VirtDevice {
struct scsi_device *device;
typedef struct _VirtTarget {
u8 tflags;
u8 ioc_id;
u8 target_id;
@ -342,21 +341,18 @@ typedef struct _VirtDevice {
u8 negoFlags; /* bit field, see above */
u8 raidVolume; /* set, if RAID Volume */
u8 type; /* byte 0 of Inquiry data */
u8 cflags; /* controller flags */
u8 rsvd1raid;
u16 fc_phys_lun;
u16 fc_xlat_lun;
u32 num_luns;
u32 luns[8]; /* Max LUNs is 256 */
u8 pad[4];
u8 inq_data[8];
/* IEEE Registered Extended Identifier
obtained via INQUIRY VPD page 0x83 */
/* NOTE: Do not separate uniq_prepad and uniq_data
as they are treateed as a single entity in the code */
u8 uniq_prepad[8];
u8 uniq_data[20];
u8 pad2[4];
} VirtTarget;
typedef struct _VirtDevice {
VirtTarget *vtarget;
u8 ioc_id;
u8 bus_id;
u8 target_id;
u8 configured_lun;
u32 lun;
} VirtDevice;
/*
@ -912,7 +908,7 @@ typedef struct _MPT_SCSI_HOST {
int port;
u32 pad0;
struct scsi_cmnd **ScsiLookup;
VirtDevice **Targets;
VirtTarget **Targets;
MPT_LOCAL_REPLY *pLocal; /* used for internal commands */
struct timer_list timer;
/* Pool of memory for holding SCpnts before doing

View File

@ -1245,7 +1245,7 @@ mptctl_gettargetinfo (unsigned long arg)
MPT_ADAPTER *ioc;
struct Scsi_Host *sh;
MPT_SCSI_HOST *hd;
VirtDevice *vdev;
VirtTarget *vdev;
char *pmem;
int *pdata;
IOCPage2_t *pIoc2;
@ -1822,7 +1822,7 @@ mptctl_do_mpt_command (struct mpt_ioctl_command karg, void __user *mfPtr)
case MPI_FUNCTION_SCSI_IO_REQUEST:
if (ioc->sh) {
SCSIIORequest_t *pScsiReq = (SCSIIORequest_t *) mf;
VirtDevice *pTarget = NULL;
VirtTarget *pTarget = NULL;
MPT_SCSI_HOST *hd = NULL;
int qtag = MPI_SCSIIO_CONTROL_UNTAGGED;
int scsidir = 0;

View File

@ -90,8 +90,10 @@ static struct scsi_host_template mptfc_driver_template = {
.name = "MPT FC Host",
.info = mptscsih_info,
.queuecommand = mptscsih_qcmd,
.target_alloc = mptscsih_target_alloc,
.slave_alloc = mptscsih_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptscsih_target_destroy,
.slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@ -292,10 +294,10 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
memset(mem, 0, sz);
hd->Targets = (VirtDevice **) mem;
hd->Targets = (VirtTarget **) mem;
dprintk((KERN_INFO
" Targets @ %p, sz=%d\n", hd->Targets, sz));
" vdev @ %p, sz=%d\n", hd->Targets, sz));
/* Clear the TM flags
*/

View File

@ -228,31 +228,35 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
* implement ->target_alloc.
*/
static int
mptsas_slave_alloc(struct scsi_device *device)
mptsas_slave_alloc(struct scsi_device *sdev)
{
struct Scsi_Host *host = device->host;
struct Scsi_Host *host = sdev->host;
MPT_SCSI_HOST *hd = (MPT_SCSI_HOST *)host->hostdata;
struct sas_rphy *rphy;
struct mptsas_portinfo *p;
VirtTarget *vtarget;
VirtDevice *vdev;
uint target = device->id;
struct scsi_target *starget;
int i;
if ((vdev = hd->Targets[target]) != NULL)
goto out;
vdev = kmalloc(sizeof(VirtDevice), GFP_KERNEL);
if (!vdev) {
printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
hd->ioc->name, sizeof(VirtDevice));
return -ENOMEM;
}
memset(vdev, 0, sizeof(VirtDevice));
vdev->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
vdev->ioc_id = hd->ioc->id;
sdev->hostdata = vdev;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
vdev->vtarget = vtarget;
if (vtarget->num_luns == 0) {
vtarget->tflags = MPT_TARGET_FLAGS_Q_YES|MPT_TARGET_FLAGS_VALID_INQUIRY;
hd->Targets[sdev->id] = vtarget;
}
rphy = dev_to_rphy(device->sdev_target->dev.parent);
rphy = dev_to_rphy(sdev->sdev_target->dev.parent);
list_for_each_entry(p, &hd->ioc->sas_topology, list) {
for (i = 0; i < p->num_phys; i++) {
if (p->phy_info[i].attached.sas_address ==
@ -260,7 +264,7 @@ mptsas_slave_alloc(struct scsi_device *device)
vdev->target_id =
p->phy_info[i].attached.target;
vdev->bus_id = p->phy_info[i].attached.bus;
hd->Targets[device->id] = vdev;
vdev->lun = sdev->lun;
goto out;
}
}
@ -271,8 +275,10 @@ mptsas_slave_alloc(struct scsi_device *device)
return -ENODEV;
out:
vdev->num_luns++;
device->hostdata = vdev;
vtarget->ioc_id = vdev->ioc_id;
vtarget->target_id = vdev->target_id;
vtarget->bus_id = vdev->bus_id;
vtarget->num_luns++;
return 0;
}
@ -283,8 +289,10 @@ static struct scsi_host_template mptsas_driver_template = {
.name = "MPT SPI Host",
.info = mptscsih_info,
.queuecommand = mptscsih_qcmd,
.target_alloc = mptscsih_target_alloc,
.slave_alloc = mptsas_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptscsih_target_destroy,
.slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@ -987,7 +995,6 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
goto out_free_port_info;
list_add_tail(&port_info->list, &ioc->sas_topology);
for (i = 0; i < port_info->num_phys; i++) {
mptsas_sas_phy_pg0(ioc, &port_info->phy_info[i],
(MPI_SAS_PHY_PGAD_FORM_PHY_NUMBER <<
@ -1263,10 +1270,10 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
memset(mem, 0, sz);
hd->Targets = (VirtDevice **) mem;
hd->Targets = (VirtTarget **) mem;
dprintk((KERN_INFO
" Targets @ %p, sz=%d\n", hd->Targets, sz));
" vtarget @ %p, sz=%d\n", hd->Targets, sz));
/* Clear the TM flags
*/

File diff suppressed because it is too large Load Diff

View File

@ -91,7 +91,9 @@ extern int mptscsih_resume(struct pci_dev *pdev);
extern int mptscsih_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset, int length, int func);
extern const char * mptscsih_info(struct Scsi_Host *SChost);
extern int mptscsih_qcmd(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *));
extern int mptscsih_target_alloc(struct scsi_target *starget);
extern int mptscsih_slave_alloc(struct scsi_device *device);
extern void mptscsih_target_destroy(struct scsi_target *starget);
extern void mptscsih_slave_destroy(struct scsi_device *device);
extern int mptscsih_slave_configure(struct scsi_device *device);
extern int mptscsih_abort(struct scsi_cmnd * SCpnt);

View File

@ -109,8 +109,10 @@ static struct scsi_host_template mptspi_driver_template = {
.name = "MPT SPI Host",
.info = mptscsih_info,
.queuecommand = mptscsih_qcmd,
.target_alloc = mptscsih_target_alloc,
.slave_alloc = mptscsih_slave_alloc,
.slave_configure = mptscsih_slave_configure,
.target_destroy = mptscsih_target_destroy,
.slave_destroy = mptscsih_slave_destroy,
.change_queue_depth = mptscsih_change_queue_depth,
.eh_abort_handler = mptscsih_abort,
@ -312,10 +314,10 @@ mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
}
memset(mem, 0, sz);
hd->Targets = (VirtDevice **) mem;
hd->Targets = (VirtTarget **) mem;
dprintk((KERN_INFO
" Targets @ %p, sz=%d\n", hd->Targets, sz));
" vdev @ %p, sz=%d\n", hd->Targets, sz));
/* Clear the TM flags
*/