USB: Clear "warm" port reset change.
In USB 3.0, there are two types of resets: a "hot" port reset and a "warm" port reset. The hot port reset is always tried first, and involves sending the reset signaling for a shorter amount of time. But sometimes devices don't respond to the hot reset, and a "Bigger Hammer" is needed. External hubs and roothubs will automatically try a warm reset when the hot reset fails, and they will set a status change bit to indicate when there is a "BH reset" change. Make sure the USB core clears that port status change bit, or we'll get lots of status change notifications on the interrupt endpoint of the USB 3.0 hub. (Side note: you may be confused why the USB 3.0 spec calls the same type of reset "warm reset" in some places and "BH reset" in other places. "BH" reset is supposed to stand for "Big Hammer" reset, but it also stands for "Brad Hosler". Brad died shortly after the USB 3.0 bus specification was started, and they decided to name the reset after him. The suggestion was made shortly before the spec was finalized, so the wording is a bit inconsistent.) Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
This commit is contained in:
parent
dbe79bbe9d
commit
c706157409
1 changed files with 8 additions and 0 deletions
|
@ -3476,6 +3476,14 @@ static void hub_events(void)
|
|||
clear_port_feature(hdev, i,
|
||||
USB_PORT_FEAT_C_RESET);
|
||||
}
|
||||
if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
|
||||
hub_is_superspeed(hub->hdev)) {
|
||||
dev_dbg(hub_dev,
|
||||
"warm reset change on port %d\n",
|
||||
i);
|
||||
clear_port_feature(hdev, i,
|
||||
USB_PORT_FEAT_C_BH_PORT_RESET);
|
||||
}
|
||||
if (portchange & USB_PORT_STAT_C_LINK_STATE) {
|
||||
clear_port_feature(hub->hdev, i,
|
||||
USB_PORT_FEAT_C_PORT_LINK_STATE);
|
||||
|
|
Reference in a new issue