From c4d877c1b3df58d89f01d7b211f58b944356eea3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 27 Jan 2011 09:50:13 +0000 Subject: [PATCH] ARM: mmci: avoid unnecessary switch to data available PIO interrupts We don't need to switch to data available interrupts if there's at least half a FIFO depth worth of data remaining, as we'll still get the FIFO half full interrupt. Keep this interrupt masked off until we have less than half the FIFO depth worth of data remaining. Signed-off-by: Russell King --- drivers/mmc/host/mmci.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 2563792c01d..bde170d8f72 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -224,10 +224,11 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) irqmask = MCI_RXFIFOHALFFULLMASK; /* - * If we have less than a FIFOSIZE of bytes to transfer, - * trigger a PIO interrupt as soon as any data is available. + * If we have less than the fifo 'half-full' threshold to + * transfer, trigger a PIO interrupt as soon as any data + * is available. */ - if (host->size < variant->fifosize) + if (host->size < variant->fifohalfsize) irqmask |= MCI_RXDATAAVLBLMASK; } else { /* @@ -502,10 +503,10 @@ static irqreturn_t mmci_pio_irq(int irq, void *dev_id) local_irq_restore(flags); /* - * If we're nearing the end of the read, switch to - * "any data available" mode. + * If we have less than the fifo 'half-full' threshold to transfer, + * trigger a PIO interrupt as soon as any data is available. */ - if (status & MCI_RXACTIVE && host->size < variant->fifosize) + if (status & MCI_RXACTIVE && host->size < variant->fifohalfsize) mmci_set_mask1(host, MCI_RXDATAAVLBLMASK); /*