m68k: amiga - GVP Series II SCSI zorro_driver conversion
Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This commit is contained in:
Geert Uytterhoeven
parent
65c2784a24
commit
c1d288a589
|
|
@ -1,26 +1,20 @@
|
|||
#include <linux/types.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/blkdev.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/mm.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/spinlock.h>
|
||||
#include <linux/zorro.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
#include <asm/page.h>
|
||||
#include <asm/pgtable.h>
|
||||
#include <asm/amigaints.h>
|
||||
#include <asm/amigahw.h>
|
||||
#include <linux/zorro.h>
|
||||
#include <asm/irq.h>
|
||||
#include <linux/spinlock.h>
|
||||
|
||||
#include "scsi.h"
|
||||
#include <scsi/scsi_host.h>
|
||||
#include "wd33c93.h"
|
||||
#include "gvp11.h"
|
||||
|
||||
#include <linux/stat.h>
|
||||
|
||||
|
||||
#define CHECK_WD33C93
|
||||
|
||||
|
|
@ -169,7 +163,40 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
|
|||
}
|
||||
}
|
||||
|
||||
static int __init check_wd33c93(struct gvp11_scsiregs *regs)
|
||||
static int gvp11_bus_reset(struct scsi_cmnd *cmd)
|
||||
{
|
||||
struct Scsi_Host *instance = cmd->device->host;
|
||||
|
||||
/* FIXME perform bus-specific reset */
|
||||
|
||||
/* FIXME 2: shouldn't we no-op this function (return
|
||||
FAILED), and fall back to host reset function,
|
||||
wd33c93_host_reset ? */
|
||||
|
||||
spin_lock_irq(instance->host_lock);
|
||||
wd33c93_host_reset(cmd);
|
||||
spin_unlock_irq(instance->host_lock);
|
||||
|
||||
return SUCCESS;
|
||||
}
|
||||
|
||||
static struct scsi_host_template gvp11_scsi_template = {
|
||||
.module = THIS_MODULE,
|
||||
.name = "GVP Series II SCSI",
|
||||
.proc_info = wd33c93_proc_info,
|
||||
.proc_name = "GVP11",
|
||||
.queuecommand = wd33c93_queuecommand,
|
||||
.eh_abort_handler = wd33c93_abort,
|
||||
.eh_bus_reset_handler = gvp11_bus_reset,
|
||||
.eh_host_reset_handler = wd33c93_host_reset,
|
||||
.can_queue = CAN_QUEUE,
|
||||
.this_id = 7,
|
||||
.sg_tablesize = SG_ALL,
|
||||
.cmd_per_lun = CMD_PER_LUN,
|
||||
.use_clustering = DISABLE_CLUSTERING
|
||||
};
|
||||
|
||||
static int __devinit check_wd33c93(struct gvp11_scsiregs *regs)
|
||||
{
|
||||
#ifdef CHECK_WD33C93
|
||||
volatile unsigned char *sasr_3393, *scmd_3393;
|
||||
|
|
@ -249,163 +276,150 @@ static int __init check_wd33c93(struct gvp11_scsiregs *regs)
|
|||
return 0;
|
||||
}
|
||||
|
||||
int __init gvp11_detect(struct scsi_host_template *tpnt)
|
||||
static int __devinit gvp11_probe(struct zorro_dev *z,
|
||||
const struct zorro_device_id *ent)
|
||||
{
|
||||
static unsigned char called = 0;
|
||||
struct Scsi_Host *instance;
|
||||
unsigned long address;
|
||||
int error;
|
||||
unsigned int epc;
|
||||
struct zorro_dev *z = NULL;
|
||||
unsigned int default_dma_xfer_mask;
|
||||
struct WD33C93_hostdata *hdata;
|
||||
struct gvp11_scsiregs *regs;
|
||||
wd33c93_regs wdregs;
|
||||
int num_gvp11 = 0;
|
||||
|
||||
if (!MACH_IS_AMIGA || called)
|
||||
return 0;
|
||||
called = 1;
|
||||
default_dma_xfer_mask = ent->driver_data;
|
||||
|
||||
tpnt->proc_name = "GVP11";
|
||||
tpnt->proc_info = &wd33c93_proc_info;
|
||||
/*
|
||||
* Rumors state that some GVP ram boards use the same product
|
||||
* code as the SCSI controllers. Therefore if the board-size
|
||||
* is not 64KB we asume it is a ram board and bail out.
|
||||
*/
|
||||
if (zorro_resource_len(z) != 0x10000)
|
||||
return -ENODEV;
|
||||
|
||||
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
|
||||
/*
|
||||
* This should (hopefully) be the correct way to identify
|
||||
* all the different GVP SCSI controllers (except for the
|
||||
* SERIES I though).
|
||||
*/
|
||||
address = z->resource.start;
|
||||
if (!request_mem_region(address, 256, "wd33c93"))
|
||||
return -EBUSY;
|
||||
|
||||
if (z->id == ZORRO_PROD_GVP_COMBO_030_R3_SCSI ||
|
||||
z->id == ZORRO_PROD_GVP_SERIES_II)
|
||||
default_dma_xfer_mask = ~0x00ffffff;
|
||||
else if (z->id == ZORRO_PROD_GVP_GFORCE_030_SCSI ||
|
||||
z->id == ZORRO_PROD_GVP_A530_SCSI ||
|
||||
z->id == ZORRO_PROD_GVP_COMBO_030_R4_SCSI)
|
||||
default_dma_xfer_mask = ~0x01ffffff;
|
||||
else if (z->id == ZORRO_PROD_GVP_A1291 ||
|
||||
z->id == ZORRO_PROD_GVP_GFORCE_040_SCSI_1)
|
||||
default_dma_xfer_mask = ~0x07ffffff;
|
||||
else
|
||||
continue;
|
||||
regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address));
|
||||
|
||||
/*
|
||||
* Rumors state that some GVP ram boards use the same product
|
||||
* code as the SCSI controllers. Therefore if the board-size
|
||||
* is not 64KB we asume it is a ram board and bail out.
|
||||
*/
|
||||
if (z->resource.end - z->resource.start != 0xffff)
|
||||
continue;
|
||||
error = check_wd33c93(regs);
|
||||
if (error)
|
||||
goto fail_check_or_alloc;
|
||||
|
||||
address = z->resource.start;
|
||||
if (!request_mem_region(address, 256, "wd33c93"))
|
||||
continue;
|
||||
|
||||
regs = (struct gvp11_scsiregs *)(ZTWO_VADDR(address));
|
||||
if (check_wd33c93(regs))
|
||||
goto release;
|
||||
|
||||
instance = scsi_register(tpnt, sizeof(struct WD33C93_hostdata));
|
||||
if (instance == NULL)
|
||||
goto release;
|
||||
instance->base = ZTWO_VADDR(address);
|
||||
instance->irq = IRQ_AMIGA_PORTS;
|
||||
instance->unique_id = z->slotaddr;
|
||||
|
||||
hdata = shost_priv(instance);
|
||||
if (gvp11_xfer_mask)
|
||||
hdata->dma_xfer_mask = gvp11_xfer_mask;
|
||||
else
|
||||
hdata->dma_xfer_mask = default_dma_xfer_mask;
|
||||
|
||||
regs->secret2 = 1;
|
||||
regs->secret1 = 0;
|
||||
regs->secret3 = 15;
|
||||
while (regs->CNTR & GVP11_DMAC_BUSY)
|
||||
;
|
||||
regs->CNTR = 0;
|
||||
|
||||
regs->BANK = 0;
|
||||
|
||||
epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
|
||||
|
||||
/*
|
||||
* Check for 14MHz SCSI clock
|
||||
*/
|
||||
wdregs.SASR = ®s->SASR;
|
||||
wdregs.SCMD = ®s->SCMD;
|
||||
hdata->no_sync = 0xff;
|
||||
hdata->fast = 0;
|
||||
hdata->dma_mode = CTRL_DMA;
|
||||
wd33c93_init(instance, wdregs, dma_setup, dma_stop,
|
||||
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
|
||||
: WD33C93_FS_12_15);
|
||||
|
||||
if (request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
|
||||
"GVP11 SCSI", instance))
|
||||
goto unregister;
|
||||
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
||||
num_gvp11++;
|
||||
continue;
|
||||
|
||||
unregister:
|
||||
scsi_unregister(instance);
|
||||
release:
|
||||
release_mem_region(address, 256);
|
||||
instance = scsi_host_alloc(&gvp11_scsi_template,
|
||||
sizeof(struct WD33C93_hostdata));
|
||||
if (!instance) {
|
||||
error = -ENOMEM;
|
||||
goto fail_check_or_alloc;
|
||||
}
|
||||
|
||||
return num_gvp11;
|
||||
instance->base = (unsigned long)regs;
|
||||
instance->irq = IRQ_AMIGA_PORTS;
|
||||
instance->unique_id = z->slotaddr;
|
||||
|
||||
regs->secret2 = 1;
|
||||
regs->secret1 = 0;
|
||||
regs->secret3 = 15;
|
||||
while (regs->CNTR & GVP11_DMAC_BUSY)
|
||||
;
|
||||
regs->CNTR = 0;
|
||||
regs->BANK = 0;
|
||||
|
||||
wdregs.SASR = ®s->SASR;
|
||||
wdregs.SCMD = ®s->SCMD;
|
||||
|
||||
hdata = shost_priv(instance);
|
||||
if (gvp11_xfer_mask)
|
||||
hdata->dma_xfer_mask = gvp11_xfer_mask;
|
||||
else
|
||||
hdata->dma_xfer_mask = default_dma_xfer_mask;
|
||||
|
||||
hdata->no_sync = 0xff;
|
||||
hdata->fast = 0;
|
||||
hdata->dma_mode = CTRL_DMA;
|
||||
|
||||
/*
|
||||
* Check for 14MHz SCSI clock
|
||||
*/
|
||||
epc = *(unsigned short *)(ZTWO_VADDR(address) + 0x8000);
|
||||
wd33c93_init(instance, wdregs, dma_setup, dma_stop,
|
||||
(epc & GVP_SCSICLKMASK) ? WD33C93_FS_8_10
|
||||
: WD33C93_FS_12_15);
|
||||
|
||||
error = request_irq(IRQ_AMIGA_PORTS, gvp11_intr, IRQF_SHARED,
|
||||
"GVP11 SCSI", instance);
|
||||
if (error)
|
||||
goto fail_irq;
|
||||
|
||||
regs->CNTR = GVP11_DMAC_INT_ENABLE;
|
||||
|
||||
error = scsi_add_host(instance, NULL);
|
||||
if (error)
|
||||
goto fail_host;
|
||||
|
||||
zorro_set_drvdata(z, instance);
|
||||
scsi_scan_host(instance);
|
||||
return 0;
|
||||
|
||||
fail_host:
|
||||
free_irq(IRQ_AMIGA_PORTS, instance);
|
||||
fail_irq:
|
||||
scsi_host_put(instance);
|
||||
fail_check_or_alloc:
|
||||
release_mem_region(address, 256);
|
||||
return error;
|
||||
}
|
||||
|
||||
static int gvp11_bus_reset(struct scsi_cmnd *cmd)
|
||||
static void __devexit gvp11_remove(struct zorro_dev *z)
|
||||
{
|
||||
/* FIXME perform bus-specific reset */
|
||||
|
||||
/* FIXME 2: shouldn't we no-op this function (return
|
||||
FAILED), and fall back to host reset function,
|
||||
wd33c93_host_reset ? */
|
||||
|
||||
spin_lock_irq(cmd->device->host->host_lock);
|
||||
wd33c93_host_reset(cmd);
|
||||
spin_unlock_irq(cmd->device->host->host_lock);
|
||||
|
||||
return SUCCESS;
|
||||
}
|
||||
|
||||
|
||||
#define HOSTS_C
|
||||
|
||||
#include "gvp11.h"
|
||||
|
||||
static struct scsi_host_template driver_template = {
|
||||
.proc_name = "GVP11",
|
||||
.name = "GVP Series II SCSI",
|
||||
.detect = gvp11_detect,
|
||||
.release = gvp11_release,
|
||||
.queuecommand = wd33c93_queuecommand,
|
||||
.eh_abort_handler = wd33c93_abort,
|
||||
.eh_bus_reset_handler = gvp11_bus_reset,
|
||||
.eh_host_reset_handler = wd33c93_host_reset,
|
||||
.can_queue = CAN_QUEUE,
|
||||
.this_id = 7,
|
||||
.sg_tablesize = SG_ALL,
|
||||
.cmd_per_lun = CMD_PER_LUN,
|
||||
.use_clustering = DISABLE_CLUSTERING
|
||||
};
|
||||
|
||||
|
||||
#include "scsi_module.c"
|
||||
|
||||
int gvp11_release(struct Scsi_Host *instance)
|
||||
{
|
||||
#ifdef MODULE
|
||||
struct Scsi_Host *instance = zorro_get_drvdata(z);
|
||||
struct gvp11_scsiregs *regs = (struct gvp11_scsiregs *)(instance->base);
|
||||
|
||||
regs->CNTR = 0;
|
||||
release_mem_region(ZTWO_PADDR(instance->base), 256);
|
||||
scsi_remove_host(instance);
|
||||
free_irq(IRQ_AMIGA_PORTS, instance);
|
||||
#endif
|
||||
return 1;
|
||||
scsi_host_put(instance);
|
||||
release_mem_region(z->resource.start, 256);
|
||||
}
|
||||
|
||||
/*
|
||||
* This should (hopefully) be the correct way to identify
|
||||
* all the different GVP SCSI controllers (except for the
|
||||
* SERIES I though).
|
||||
*/
|
||||
|
||||
static struct zorro_device_id gvp11_zorro_tbl[] __devinitdata = {
|
||||
{ ZORRO_PROD_GVP_COMBO_030_R3_SCSI, ~0x00ffffff },
|
||||
{ ZORRO_PROD_GVP_SERIES_II, ~0x00ffffff },
|
||||
{ ZORRO_PROD_GVP_GFORCE_030_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_A530_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_COMBO_030_R4_SCSI, ~0x01ffffff },
|
||||
{ ZORRO_PROD_GVP_A1291, ~0x07ffffff },
|
||||
{ ZORRO_PROD_GVP_GFORCE_040_SCSI_1, ~0x07ffffff },
|
||||
{ 0 }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(zorro, gvp11_zorro_tbl);
|
||||
|
||||
static struct zorro_driver gvp11_driver = {
|
||||
.name = "gvp11",
|
||||
.id_table = gvp11_zorro_tbl,
|
||||
.probe = gvp11_probe,
|
||||
.remove = __devexit_p(gvp11_remove),
|
||||
};
|
||||
|
||||
static int __init gvp11_init(void)
|
||||
{
|
||||
return zorro_register_driver(&gvp11_driver);
|
||||
}
|
||||
module_init(gvp11_init);
|
||||
|
||||
static void __exit gvp11_exit(void)
|
||||
{
|
||||
zorro_unregister_driver(&gvp11_driver);
|
||||
}
|
||||
module_exit(gvp11_exit);
|
||||
|
||||
MODULE_DESCRIPTION("GVP Series II SCSI");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
|
|||
|
|
@ -11,9 +11,6 @@
|
|||
|
||||
#include <linux/types.h>
|
||||
|
||||
int gvp11_detect(struct scsi_host_template *);
|
||||
int gvp11_release(struct Scsi_Host *);
|
||||
|
||||
#ifndef CMD_PER_LUN
|
||||
#define CMD_PER_LUN 2
|
||||
#endif
|
||||
|
|
@ -22,8 +19,6 @@ int gvp11_release(struct Scsi_Host *);
|
|||
#define CAN_QUEUE 16
|
||||
#endif
|
||||
|
||||
#ifndef HOSTS_C
|
||||
|
||||
/*
|
||||
* if the transfer address ANDed with this results in a non-zero
|
||||
* result, then we can't use DMA.
|
||||
|
|
@ -54,6 +49,4 @@ struct gvp11_scsiregs {
|
|||
#define GVP11_DMAC_INT_ENABLE (1<<3)
|
||||
#define GVP11_DMAC_DIR_WRITE (1<<4)
|
||||
|
||||
#endif /* else def HOSTS_C */
|
||||
|
||||
#endif /* GVP11_H */
|
||||
|
|
|
|||
Reference in New Issue