dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ath9k: rework power state handling 

Turning off the radio when mac80211 tells the driver that it's idle is not
a good idea, as idle interfaces might still occasionally scan or send packets.
The only time the radio can be safely turned off is when drv_stop has been
called. In the mean time, use sc->ps_idle only to indicate network sleep vs
full sleep.
Move the LED GPIO changes out of the PCI suspend/resume path, the start/stop
functions already take care of that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Felix Fietkau 2011-11-16 13:08:41 +01:00 committed by John W. Linville
parent c8e8868e3b
commit c0c1174144
2 changed files with 48 additions and 131 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

158
drivers/net/wireless/ath/ath9k/main.c
View File

@ -887,82 +887,6 @@ chip_reset:
#undef SCHED_INTR
}
static void ath_radio_enable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_channel *channel = hw->conf.channel;
int r;
ath9k_ps_wakeup(sc);
spin_lock_bh(&sc->sc_pcu_lock);
atomic_set(&ah->intr_ref_cnt, -1);
ath9k_hw_configpcipowersave(ah, false);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(sc->hw, ah);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
ath_err(common,
"Unable to reset channel (%u MHz), reset status %d\n",
channel->center_freq, r);
}
ath_complete_reset(sc, true);
/* Enable LED */
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
void ath_radio_disable(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
struct ieee80211_channel *channel = hw->conf.channel;
int r;
ath9k_ps_wakeup(sc);
ath_cancel_work(sc);
spin_lock_bh(&sc->sc_pcu_lock);
/*
* Keep the LED on when the radio is disabled
* during idle unassociated state.
*/
if (!sc->ps_idle) {
ath9k_hw_set_gpio(ah, ah->led_pin, 1);
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
ath_prepare_reset(sc, false, true);
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
ath_err(ath9k_hw_common(sc->sc_ah),
"Unable to reset channel (%u MHz), reset status %d\n",
channel->center_freq, r);
}
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, true);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
}
static int ath_reset(struct ath_softc *sc, bool retry_tx)
{
int r;
@ -1098,6 +1022,9 @@ static int ath9k_start(struct ieee80211_hw *hw)
* and then setup of the interrupt mask.
*/
spin_lock_bh(&sc->sc_pcu_lock);
atomic_set(&ah->intr_ref_cnt, -1);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
ath_err(common,
@ -1139,6 +1066,18 @@ static int ath9k_start(struct ieee80211_hw *hw)
goto mutex_unlock;
}
if (ah->led_pin >= 0) {
ath9k_hw_cfg_output(ah, ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(ah, ah->led_pin, 0);
}
/*
* Reset key cache to sane defaults (all entries cleared) instead of
* semi-random values after suspend/resume.
*/
ath9k_cmn_init_crypto(sc->sc_ah);
spin_unlock_bh(&sc->sc_pcu_lock);
if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
@ -1237,6 +1176,7 @@ static void ath9k_stop(struct ieee80211_hw *hw)
struct ath_softc *sc = hw->priv;
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
bool prev_idle;
mutex_lock(&sc->mutex);
@ -1267,21 +1207,6 @@ static void ath9k_stop(struct ieee80211_hw *hw)
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
if (!(sc->sc_flags & SC_OP_INVALID)) {
ath_drain_all_txq(sc, false);
ath_stoprecv(sc);
ath9k_hw_phy_disable(ah);
} else
sc->rx.rxlink = NULL;
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
spin_unlock_bh(&sc->sc_pcu_lock);
/* we can now sync irq and kill any running tasklets, since we already
@ -1290,12 +1215,37 @@ static void ath9k_stop(struct ieee80211_hw *hw)
tasklet_kill(&sc->intr_tq);
tasklet_kill(&sc->bcon_tasklet);
prev_idle = sc->ps_idle;
sc->ps_idle = true;
spin_lock_bh(&sc->sc_pcu_lock);
if (ah->led_pin >= 0) {
ath9k_hw_set_gpio(ah, ah->led_pin, 1);
ath9k_hw_cfg_gpio_input(ah, ah->led_pin);
}
ath_prepare_reset(sc, false, true);
if (sc->rx.frag) {
dev_kfree_skb_any(sc->rx.frag);
sc->rx.frag = NULL;
}
if (!ah->curchan)
ah->curchan = ath9k_cmn_get_curchannel(hw, ah);
ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
ath9k_hw_phy_disable(ah);
ath9k_hw_configpcipowersave(ah, true);
spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
sc->ps_idle = true;
ath_radio_disable(sc, hw);
sc->sc_flags |= SC_OP_INVALID;
sc->ps_idle = prev_idle;
mutex_unlock(&sc->mutex);
@ -1635,8 +1585,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &hw->conf;
bool disable_radio = false;
ath9k_ps_wakeup(sc);
mutex_lock(&sc->mutex);
/*
@ -1645,16 +1595,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
* of the changes. Likewise we must only disable the radio towards
* the end.
*/
if (changed & IEEE80211_CONF_CHANGE_IDLE) {
if (changed & IEEE80211_CONF_CHANGE_IDLE)
sc->ps_idle = !!(conf->flags & IEEE80211_CONF_IDLE);
if (!sc->ps_idle) {
ath_radio_enable(sc, hw);
ath_dbg(common, ATH_DBG_CONFIG,
"not-idle: enabling radio\n");
} else {
disable_radio = true;
}
}
/*
* We just prepare to enable PS. We have to wait until our AP has
@ -1760,18 +1702,12 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
ath_dbg(common, ATH_DBG_CONFIG,
"Set power: %d\n", conf->power_level);
sc->config.txpowlimit = 2 * conf->power_level;
ath9k_ps_wakeup(sc);
ath9k_cmn_update_txpow(ah, sc->curtxpow,
sc->config.txpowlimit, &sc->curtxpow);
ath9k_ps_restore(sc);
}
if (disable_radio) {
ath_dbg(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
ath_radio_disable(sc, hw);
}
mutex_unlock(&sc->mutex);
ath9k_ps_restore(sc);
return 0;
}

21
drivers/net/wireless/ath/ath9k/pci.c
View File

@ -307,12 +307,11 @@ static int ath_pci_suspend(struct device *device)
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1);
/* The device has to be moved to FULLSLEEP forcibly.
* Otherwise the chip never moved to full sleep,
* when no interface is up.
*/
ath9k_hw_disable(sc->sc_ah);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
return 0;
@ -321,8 +320,6 @@ static int ath_pci_suspend(struct device *device)
static int ath_pci_resume(struct device *device)
{
struct pci_dev *pdev = to_pci_dev(device);
struct ieee80211_hw *hw = pci_get_drvdata(pdev);
struct ath_softc *sc = hw->priv;
u32 val;
/*
@ -334,22 +331,6 @@ static int ath_pci_resume(struct device *device)
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
ath9k_ps_wakeup(sc);
/* Enable LED */
ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 0);
/*
* Reset key cache to sane defaults (all entries cleared) instead of
* semi-random values after suspend/resume.
*/
ath9k_cmn_init_crypto(sc->sc_ah);
ath9k_ps_restore(sc);
sc->ps_idle = true;
ath_radio_disable(sc, hw);
return 0;
}