diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index b45ad312c58..c1af5326e92 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -38,49 +38,49 @@
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_W),
-	KEY(0, 2, KEY_E),
-	KEY(0, 3, KEY_R),
-	KEY(0, 4, KEY_T),
-	KEY(0, 5, KEY_Y),
-	KEY(0, 6, KEY_U),
-	KEY(0, 7, KEY_I),
-	KEY(1, 0, KEY_O),
+	KEY(0, 1, KEY_O),
+	KEY(0, 2, KEY_P),
+	KEY(0, 3, KEY_COMMA),
+	KEY(0, 4, KEY_BACKSPACE),
+	KEY(0, 6, KEY_A),
+	KEY(0, 7, KEY_S),
+	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_DOT),
-	KEY(1, 3, KEY_V),
-	KEY(1, 4, KEY_DOWN),
-	KEY(2, 0, KEY_P),
-	KEY(2, 1, KEY_F),
+	KEY(1, 2, KEY_F),
+	KEY(1, 3, KEY_G),
+	KEY(1, 4, KEY_H),
+	KEY(1, 5, KEY_J),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_L),
+	KEY(2, 0, KEY_E),
+	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_B),
-	KEY(2, 4, KEY_RIGHT),
-	KEY(3, 0, KEY_COMMA),
-	KEY(3, 1, KEY_G),
-	KEY(3, 2, KEY_ENTER),
+	KEY(2, 3, KEY_ENTER),
+	KEY(2, 5, KEY_Z),
+	KEY(2, 6, KEY_X),
+	KEY(2, 7, KEY_C),
+	KEY(3, 0, KEY_R),
+	KEY(3, 1, KEY_V),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_N),
-	KEY(4, 0, KEY_BACKSPACE),
-	KEY(4, 1, KEY_H),
-	KEY(4, 3, KEY_M),
+	KEY(3, 4, KEY_M),
+	KEY(3, 5, KEY_SPACE),
+	KEY(3, 6, KEY_SPACE),
+	KEY(3, 7, KEY_LEFT),
+	KEY(4, 0, KEY_T),
+	KEY(4, 1, KEY_DOWN),
+	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(5, 1, KEY_J),
-	KEY(5, 2, KEY_Z),
-	KEY(5, 3, KEY_SPACE),
-	KEY(5, 4, KEY_LEFTSHIFT),
-	KEY(6, 0, KEY_A),
-	KEY(6, 1, KEY_K),
-	KEY(6, 2, KEY_X),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_FN),
-	KEY(7, 0, KEY_S),
-	KEY(7, 1, KEY_L),
-	KEY(7, 2, KEY_C),
-	KEY(7, 3, KEY_LEFT),
-	KEY(0xff, 0, KEY_F6),
-	KEY(0xff, 1, KEY_F7),
-	KEY(0xff, 2, KEY_F8),
-	KEY(0xff, 4, KEY_F9),
-	KEY(0xff, 5, KEY_F10),
+	KEY(4, 5, KEY_RIGHTALT),
+	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(5, 0, KEY_Y),
+	KEY(6, 0, KEY_U),
+	KEY(7, 0, KEY_I),
+	KEY(7, 1, KEY_F7),
+	KEY(7, 2, KEY_F8),
+	KEY(0xff, 2, KEY_F9),
+	KEY(0xff, 4, KEY_F10),
+	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 2388cf578a6..79e3edcced1 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -143,6 +143,7 @@ static const struct xpad_device {
 	{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
 	{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+	{ 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
@@ -209,6 +210,7 @@ static struct usb_device_id xpad_table [] = {
 	XPAD_XBOX360_VENDOR(0x0738),		/* Mad Catz X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x0e6f),		/* 0x0e6f X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1430),		/* RedOctane X-Box 360 controllers */
+	XPAD_XBOX360_VENDOR(0x146b),		/* BigBen Interactive Controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Rock Band Drums */
 	{ }
 };
diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c
index c806fbf1e17..3b9f588fc74 100644
--- a/drivers/input/misc/rotary_encoder.c
+++ b/drivers/input/misc/rotary_encoder.c
@@ -106,8 +106,8 @@ static int __devinit rotary_encoder_probe(struct platform_device *pdev)
 	struct input_dev *input;
 	int err;
 
-	if (!pdata || !pdata->steps) {
-		dev_err(&pdev->dev, "invalid platform data\n");
+	if (!pdata) {
+		dev_err(&pdev->dev, "missing platform data\n");
 		return -ENOENT;
 	}
 
diff --git a/drivers/input/misc/sparcspkr.c b/drivers/input/misc/sparcspkr.c
index c4f42311fde..b064419b90a 100644
--- a/drivers/input/misc/sparcspkr.c
+++ b/drivers/input/misc/sparcspkr.c
@@ -230,7 +230,7 @@ out_err:
 	return err;
 }
 
-static int bbc_remove(struct of_device *op)
+static int __devexit bbc_remove(struct of_device *op)
 {
 	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
 	struct input_dev *input_dev = state->input_dev;
@@ -308,7 +308,7 @@ out_err:
 	return err;
 }
 
-static int grover_remove(struct of_device *op)
+static int __devexit grover_remove(struct of_device *op)
 {
 	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
 	struct grover_beep_info *info = &state->u.grover;
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 11fd038a078..a932179c4c9 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -934,6 +934,15 @@ static struct dmi_system_id dmi_ids[] __initdata = {
 		},
 		.driver_data = keymap_wistron_md2900
 	},
+	{
+		.callback = dmi_matched,
+		.ident = "Medion MD 42200",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
+		},
+		.driver_data = keymap_fs_amilo_pro_v2000
+	},
 	{
 		.callback = dmi_matched,
 		.ident = "Medion MD 96500",
diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
index c4b3fbd1a80..aa533ceffe3 100644
--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -4,7 +4,7 @@
 config SERIO
 	tristate "Serial I/O support" if EMBEDDED || !X86
 	default y
-	---help---
+	help
 	  Say Yes here if you have any input device that uses serial I/O to
 	  communicate with the system. This includes the
 	  		* standard AT keyboard and PS/2 mouse *
@@ -22,7 +22,7 @@ config SERIO_I8042
 	tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
 	default y
 	depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
-	---help---
+	help
 	  i8042 is the chip over which the standard AT keyboard and PS/2
 	  mouse are connected to the computer. If you use these devices,
 	  you'll need to say Y here.
@@ -35,7 +35,7 @@ config SERIO_I8042
 config SERIO_SERPORT
 	tristate "Serial port line discipline"
 	default y
-	---help---
+	help
 	  Say Y here if you plan to use an input device (mouse, joystick,
 	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
 
@@ -49,7 +49,7 @@ config SERIO_SERPORT
 config SERIO_CT82C710
 	tristate "ct82c710 Aux port controller"
 	depends on X86
-	---help---
+	help
 	  Say Y here if you have a Texas Instruments TravelMate notebook
 	  equipped with the ct82c710 chip and want to use a mouse connected
 	  to the "QuickPort".
@@ -66,7 +66,7 @@ config SERIO_Q40KBD
 config SERIO_PARKBD
 	tristate "Parallel port keyboard adapter"
 	depends on PARPORT
-	---help---
+	help
 	  Say Y here if you built a simple parallel port adapter to attach
 	  an additional AT keyboard, XT keyboard or PS/2 mouse.
 
@@ -124,7 +124,7 @@ config HP_SDC
 	tristate "HP System Device Controller i8042 Support"
 	depends on (GSC || HP300) && SERIO
 	default y
-	---help---
+	help
 	  This option enables support for the "System Device
 	  Controller", an i8042 carrying microcode to manage a
 	  few miscellaneous devices on some Hewlett Packard systems.
@@ -168,6 +168,7 @@ config SERIO_MACEPS2
 
 config SERIO_LIBPS2
 	tristate "PS/2 driver library" if EMBEDDED
+	depends on SERIO_I8042 || SERIO_I8042=n
 	help
 	  Say Y here if you are using a driver for device connected
 	  to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index bc56e52b945..a31578170cc 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -609,6 +609,8 @@ static irqreturn_t __init i8042_aux_test_irq(int irq, void *dev_id)
 	str = i8042_read_status();
 	if (str & I8042_STR_OBF) {
 		data = i8042_read_data();
+		dbg("%02x <- i8042 (aux_test_irq, %s)",
+			data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
 		if (i8042_irq_being_tested &&
 		    data == 0xa5 && (str & I8042_STR_AUXDATA))
 			complete(&i8042_aux_irq_delivered);
@@ -750,6 +752,7 @@ static int __init i8042_check_aux(void)
  * AUX IRQ was never delivered so we need to flush the controller to
  * get rid of the byte we put there; otherwise keyboard may not work.
  */
+		dbg("     -- i8042 (aux irq test timeout)");
 		i8042_flush();
 		retval = -1;
 	}
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
index f06332c9e21..c21e6d3a884 100644
--- a/drivers/input/touchscreen/ad7879.c
+++ b/drivers/input/touchscreen/ad7879.c
@@ -645,7 +645,7 @@ static int __devinit ad7879_probe(struct spi_device *spi)
 		kfree(ts);
 	}
 
-	return 0;
+	return error;
 }
 
 static int __devexit ad7879_remove(struct spi_device *spi)
@@ -732,7 +732,7 @@ static int __devinit ad7879_probe(struct i2c_client *client,
 		kfree(ts);
 	}
 
-	return 0;
+	return error;
 }
 
 static int __devexit ad7879_remove(struct i2c_client *client)
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 2d02dfd7076..508824ee35e 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -349,11 +349,11 @@ struct twl4030_madc_platform_data {
 	int		irq_line;
 };
 
-/* Boards have uniqe mappings of {col, row} --> keycode.
- * Column and row are 4 bits, but range only from 0..7.
+/* Boards have uniqe mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
  * a PERSISTENT_KEY is "always on" and never reported.
  */
-#define PERSISTENT_KEY(c, r)	KEY((c), (r), KEY_RESERVED)
+#define PERSISTENT_KEY(r, c)	KEY((r), (c), KEY_RESERVED)
 
 struct twl4030_keypad_data {
 	const struct matrix_keymap_data *keymap_data;