dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

sh: pci: Move se7780 INTC fixups out of pci-sh7780.c. 

These fixups belong in the board INTC setup code, not in the middle of
pci-sh7780.c.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
This commit is contained in:
Paul Mundt 2009-04-17 13:00:18 +09:00
parent 84971bb401
commit b627b4ed3d
2 changed files with 8 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/sh/boards/mach-se/7780/irq.c
View File

@ -12,10 +12,13 @@
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach-se/mach/se7780.h>
#define INTC_BASE 0xffd00000
#define INTC_ICR1 (INTC_BASE+0x1c)
/*
* Initialize IRQ setting
*/
@ -43,4 +46,7 @@ void __init init_se7780_IRQ(void)
ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
/* ICR1: detect low level(for 2ndcut) */
ctrl_outl(0xAAAA0000, INTC_ICR1);
}

24
arch/sh/drivers/pci/pci-sh7780.c
View File

@ -22,20 +22,6 @@
#include <linux/delay.h>
#include "pci-sh4.h"
#define INTC_BASE 0xffd00000
#define INTC_ICR0 (INTC_BASE+0x0)
#define INTC_ICR1 (INTC_BASE+0x1c)
#define INTC_INTPRI (INTC_BASE+0x10)
#define INTC_INTREQ (INTC_BASE+0x24)
#define INTC_INTMSK0 (INTC_BASE+0x44)
#define INTC_INTMSK1 (INTC_BASE+0x48)
#define INTC_INTMSK2 (INTC_BASE+0x40080)
#define INTC_INTMSKCLR0 (INTC_BASE+0x64)
#define INTC_INTMSKCLR1 (INTC_BASE+0x68)
#define INTC_INTMSKCLR2 (INTC_BASE+0x40084)
#define INTC_INT2MSKR (INTC_BASE+0x40038)
#define INTC_INT2MSKCR (INTC_BASE+0x4003c)
/*
* Initialization. Try all known PCI access methods. Note that we support
* using both PCI BIOS and direct access: in such cases, we use I/O ports
@ -75,16 +61,6 @@ int __init sh7780_pci_init(struct pci_channel *chan)
return -ENODEV;
}
/* Setup the INTC */
if (mach_is_7780se()) {
/* ICR0: IRL=use separately */
ctrl_outl(0x00C00020, INTC_ICR0);
/* ICR1: detect low level(for 2ndcut) */
ctrl_outl(0xAAAA0000, INTC_ICR1);
/* INTPRI: priority=3(all) */
ctrl_outl(0x33333333, INTC_INTPRI);
}
if ((ret = sh4_pci_check_direct(chan)) != 0)
return ret;