dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

[ALSA] ASoC CS4270 codec device driver 

This patch adds ALSA SoC support for the Cirrus Logic CS4270 codec.  The
following features are suppored:
1) Stand-alone and software mode
2) Software mode via I2C only
3) Master mode, not Slave
4) No power management

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
This commit is contained in:
Timur Tabi 2007-07-31 18:18:44 +02:00 committed by Jaroslav Kysela
parent 8259980ebc
commit b0c813ceee
5 changed files with 859 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
include/linux/i2c-id.h
View File

@ -120,6 +120,7 @@
#define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */
#define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */
#define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */
#define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */
#define I2C_DRIVERID_I2CDEV 900
#define I2C_DRIVERID_ARP 902 /* SMBus ARP Client */

20
sound/soc/codecs/Kconfig
View File

@ -17,3 +17,23 @@ config SND_SOC_WM8753
config SND_SOC_WM9712
tristate
depends on SND_SOC
# Cirrus Logic CS4270 Codec
config SND_SOC_CS4270
tristate
depends on SND_SOC
# Cirrus Logic CS4270 Codec Hardware Mute Support
# Select if you have external muting circuitry attached to your CS4270.
config SND_SOC_CS4270_HWMUTE
bool
depends on SND_SOC_CS4270
# Cirrus Logic CS4270 Codec VD = 3.3V Errata
# Select if you are affected by the errata where the part will not function
# if MCLK divide-by-1.5 is selected and VD is set to 3.3V. The driver will
# not select any sample rates that require MCLK to be divided by 1.5.
config SND_SOC_CS4270_VD33_ERRATA
bool
depends on SND_SOC_CS4270

2
sound/soc/codecs/Makefile
View File

@ -3,9 +3,11 @@ snd-soc-wm8731-objs := wm8731.o
snd-soc-wm8750-objs := wm8750.o
snd-soc-wm8753-objs := wm8753.o
snd-soc-wm9712-objs := wm9712.o
snd-soc-cs4270-objs := cs4270.o
obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
obj-$(CONFIG_SND_SOC_WM8731) += snd-soc-wm8731.o
obj-$(CONFIG_SND_SOC_WM8750) += snd-soc-wm8750.o
obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o

808
sound/soc/codecs/cs4270.c Normal file
View File

@ -0,0 +1,808 @@
/*
* CS4270 ALSA SoC (ASoC) codec driver
*
* Author: Timur Tabi <timur@freescale.com>
*
* Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* This is an ASoC device driver for the Cirrus Logic CS4270 codec.
*
* Current features/limitations:
*
* 1) Stand-alone and software mode is supported. Stand-alone is
* automatically selected if I2C is disabled or if a CS4270 is not found
* on the I2C bus.
* 2) Only I2C is supported, not SPI
* 3) Only Master mode is supported, not Slave.
* 4) The machine driver's 'startup' function must call
* cs4270_set_dai_sysclk() with the value of MCLK.
* 5) Only I2S and left-justified modes are supported
* 6) Power management is not supported
* 7) The only supported control is volume and hardware mute (if enabled)
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <sound/driver.h>
#include <sound/core.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <linux/i2c.h>
#include "cs4270.h"
/* Private data for the CS4270 */
struct cs4270_private {
unsigned int mclk; /* Input frequency of the MCLK pin */
unsigned int mode; /* The mode (I2S or left-justified) */
};
/*
* The codec isn't really big-endian or little-endian, since the I2S
* interface requires data to be sent serially with the MSbit first.
* However, to support BE and LE I2S devices, we specify both here. That
* way, ALSA will always match the bit patterns.
*/
#define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \
SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \
SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE)
#ifdef CONFIG_I2C
/* CS4270 registers addresses */
#define CS4270_CHIPID 0x01 /* Chip ID */
#define CS4270_PWRCTL 0x02 /* Power Control */
#define CS4270_MODE 0x03 /* Mode Control */
#define CS4270_FORMAT 0x04 /* Serial Format, ADC/DAC Control */
#define CS4270_TRANS 0x05 /* Transition Control */
#define CS4270_MUTE 0x06 /* Mute Control */
#define CS4270_VOLA 0x07 /* DAC Channel A Volume Control */
#define CS4270_VOLB 0x08 /* DAC Channel B Volume Control */
#define CS4270_FIRSTREG 0x01
#define CS4270_LASTREG 0x08
#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1)
/* Bit masks for the CS4270 registers */
#define CS4270_CHIPID_ID 0xF0
#define CS4270_CHIPID_REV 0x0F
#define CS4270_PWRCTL_FREEZE 0x80
#define CS4270_PWRCTL_PDN_ADC 0x20
#define CS4270_PWRCTL_PDN_DAC 0x02
#define CS4270_PWRCTL_PDN 0x01
#define CS4270_MODE_SPEED_MASK 0x30
#define CS4270_MODE_1X 0x00
#define CS4270_MODE_2X 0x10
#define CS4270_MODE_4X 0x20
#define CS4270_MODE_SLAVE 0x30
#define CS4270_MODE_DIV_MASK 0x0E
#define CS4270_MODE_DIV1 0x00
#define CS4270_MODE_DIV15 0x02
#define CS4270_MODE_DIV2 0x04
#define CS4270_MODE_DIV3 0x06
#define CS4270_MODE_DIV4 0x08
#define CS4270_MODE_POPGUARD 0x01
#define CS4270_FORMAT_FREEZE_A 0x80
#define CS4270_FORMAT_FREEZE_B 0x40
#define CS4270_FORMAT_LOOPBACK 0x20
#define CS4270_FORMAT_DAC_MASK 0x18
#define CS4270_FORMAT_DAC_LJ 0x00
#define CS4270_FORMAT_DAC_I2S 0x08
#define CS4270_FORMAT_DAC_RJ16 0x18
#define CS4270_FORMAT_DAC_RJ24 0x10
#define CS4270_FORMAT_ADC_MASK 0x01
#define CS4270_FORMAT_ADC_LJ 0x00
#define CS4270_FORMAT_ADC_I2S 0x01
#define CS4270_TRANS_ONE_VOL 0x80
#define CS4270_TRANS_SOFT 0x40
#define CS4270_TRANS_ZERO 0x20
#define CS4270_TRANS_INV_ADC_A 0x08
#define CS4270_TRANS_INV_ADC_B 0x10
#define CS4270_TRANS_INV_DAC_A 0x02
#define CS4270_TRANS_INV_DAC_B 0x04
#define CS4270_TRANS_DEEMPH 0x01
#define CS4270_MUTE_AUTO 0x20
#define CS4270_MUTE_ADC_A 0x08
#define CS4270_MUTE_ADC_B 0x10
#define CS4270_MUTE_POLARITY 0x04
#define CS4270_MUTE_DAC_A 0x01
#define CS4270_MUTE_DAC_B 0x02
/*
* A list of addresses on which this CS4270 could use. I2C addresses are
* 7 bits. For the CS4270, the upper four bits are always 1001, and the
* lower three bits are determined via the AD2, AD1, and AD0 pins
* (respectively).
*/
static unsigned short normal_i2c[] = {
0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
/*
* Pre-fill the CS4270 register cache.
*
* We use the auto-increment feature of the CS4270 to read all registers in
* one shot.
*/
static int cs4270_fill_cache(struct snd_soc_codec *codec)
{
u8 *cache = codec->reg_cache;
struct i2c_client *i2c_client = codec->control_data;
s32 length;
length = i2c_smbus_read_i2c_block_data(i2c_client,
CS4270_FIRSTREG | 0x80, CS4270_NUMREGS, cache);
if (length != CS4270_NUMREGS) {
printk(KERN_ERR "cs4270: I2C read failure, addr=%u\n",
i2c_client->addr);
return -EIO;
}
return 0;
}
/*
* Read from the CS4270 register cache.
*
* This CS4270 registers are cached to avoid excessive I2C I/O operations.
* After the initial read to pre-fill the cache, the CS4270 never updates
* the register values, so we won't have a cache coherncy problem.
*/
static unsigned int cs4270_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
{
u8 *cache = codec->reg_cache;
if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
return -EIO;
return cache[reg - CS4270_FIRSTREG];
}
/*
* Write to a CS4270 register via the I2C bus.
*
* This function writes the given value to the given CS4270 register, and
* also updates the register cache.
*
* Note that we don't use the hw_write function pointer of snd_soc_codec.
* That's because it's too clunky: the hw_write_t prototype does not match
* i2c_smbus_write_byte_data(), and it's just another layer of overhead.
*/
static int cs4270_i2c_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG))
return -EIO;
if (i2c_smbus_write_byte_data(codec->control_data, reg, value) == 0) {
/* We've written to the hardware, so update the cache */
u8 *cache = codec->reg_cache;
cache[reg - CS4270_FIRSTREG] = value;
return 0;
} else {
printk(KERN_ERR "cs4270: I2C write failed\n");
return -EIO;
}
}
/*
* Clock Ratio Selection for Master Mode.
*
* The data for this chart is taken from Table 5 of the CS4270 reference
* manual.
*
* This table is used to determine how to program the Mode Control register.
* It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling
* rates the CS4270 currently supports.
*
* 'ratio' is the MCLK/LRCK ratio. MCLK is usually a fixed input frequency,
* and LRCK is equal to the sampling rate. The CS4270 only supports sampling
* rates where this ratio is one of: 64, 96, 128, 192, 256, 384, 512, 768 or
* 1024.
*
* 'speed_mode' is the corresponding bit pattern to be written to the
* MODE bits of the Mode Control Register
*
* 'mclk' is the corresponding bit pattern to be wirten to the MCLK bits of
* the Mode Control Register.
*
* In situations where a single ratio is represented by multiple speed
* modes, we favor the slowest speed. E.g, for a ratio of 128, we pick
* double-speed instead of quad-speed. However, the CS4270 errata states
* that Divide-By-1.5 can cause failures, so we avoid that mode where
* possible.
*
* ERRATA: There is an errata for the CS4270 where divide-by-1.5 does not
* work if VD = 3.3V. If this effects you, select the
* CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will
* never select any sample rates that require divide-by-1.5.
*/
static struct {
unsigned int ratio;
u8 speed_mode;
u8 mclk;
} cs4270_mode_ratios[] = {
{64, CS4270_MODE_4X, CS4270_MODE_DIV1},
#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA
{96, CS4270_MODE_4X, CS4270_MODE_DIV15},
#endif
{128, CS4270_MODE_2X, CS4270_MODE_DIV1},
{192, CS4270_MODE_4X, CS4270_MODE_DIV3},
{256, CS4270_MODE_1X, CS4270_MODE_DIV1},
{384, CS4270_MODE_2X, CS4270_MODE_DIV3},
{512, CS4270_MODE_1X, CS4270_MODE_DIV2},
{768, CS4270_MODE_1X, CS4270_MODE_DIV3},
{1024, CS4270_MODE_1X, CS4270_MODE_DIV4}
};
/*
* Program the CS4270 with the given hardware parameters.
*
* The .dai_ops functions are used to provide board-specific data, like
* input frequencies, to this driver. This function takes that information,
* combines it with the hardware parameters provided, and programs the
* hardware accordingly.
*/
static int cs4270_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
struct cs4270_private *cs4270 = codec->private_data;
unsigned int ret = 0;
unsigned int i;
unsigned int rate;
unsigned int ratio;
int reg;
/* Figure out which MCLK/LRCK ratio to use */
rate = params_rate(params); /* Sampling rate, in Hz */
ratio = cs4270->mclk / rate; /* MCLK/LRCK ratio */
for (i = 0; i < ARRAY_SIZE(cs4270_mode_ratios); i++) {
if (cs4270_mode_ratios[i].ratio == ratio)
break;
}
if (i == ARRAY_SIZE(cs4270_mode_ratios)) {
/* We did not find a matching ratio */
printk(KERN_ERR "cs4270: could not find matching ratio\n");
return -EINVAL;
}
/* Freeze and power-down the codec */
ret = snd_soc_write(codec, CS4270_PWRCTL, CS4270_PWRCTL_FREEZE |
CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC |
CS4270_PWRCTL_PDN);
if (ret < 0) {
printk(KERN_ERR "cs4270: I2C write failed\n");
return ret;
}
/* Program the mode control register */
reg = snd_soc_read(codec, CS4270_MODE);
reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK);
reg |= cs4270_mode_ratios[i].speed_mode | cs4270_mode_ratios[i].mclk;
ret = snd_soc_write(codec, CS4270_MODE, reg);
if (ret < 0) {
printk(KERN_ERR "cs4270: I2C write failed\n");
return ret;
}
/* Program the format register */
reg = snd_soc_read(codec, CS4270_FORMAT);
reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK);
switch (cs4270->mode) {
case SND_SOC_DAIFMT_I2S:
reg |= CS4270_FORMAT_DAC_I2S | CS4270_FORMAT_ADC_I2S;
break;
case SND_SOC_DAIFMT_LEFT_J:
reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ;
break;
default:
printk(KERN_ERR "cs4270: unknown format\n");
return -EINVAL;
}
ret = snd_soc_write(codec, CS4270_FORMAT, reg);
if (ret < 0) {
printk(KERN_ERR "cs4270: I2C write failed\n");
return ret;
}
/* Disable auto-mute. This feature appears to be buggy, because in
some situations, auto-mute will not deactivate when it should. */
reg = snd_soc_read(codec, CS4270_MUTE);
reg &= ~CS4270_MUTE_AUTO;
ret = snd_soc_write(codec, CS4270_MUTE, reg);
if (ret < 0) {
printk(KERN_ERR "cs4270: I2C write failed\n");
return ret;
}
/* Thaw and power-up the codec */
ret = snd_soc_write(codec, CS4270_PWRCTL, 0);
if (ret < 0) {
printk(KERN_ERR "cs4270: I2C write failed\n");
return ret;
}
return ret;
}
#ifdef CONFIG_SND_SOC_CS4270_HWMUTE
/*
* Set the CS4270 external mute
*
* This function toggles the mute bits in the MUTE register. The CS4270's
* mute capability is intended for external muting circuitry, so if the
* board does not have the MUTEA or MUTEB pins connected to such circuitry,
* then this function will do nothing.
*/
static int cs4270_mute(struct snd_soc_codec_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
int reg6;
reg6 = snd_soc_read(codec, CS4270_MUTE);
if (mute)
reg6 |= CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B |
CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B;
else
reg6 &= ~(CS4270_MUTE_ADC_A | CS4270_MUTE_ADC_B |
CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B);
return snd_soc_write(codec, CS4270_MUTE, reg6);
}
#endif
/*
* Sampling rate <-> bit patter mapping
*
* This array maps sampling rates to their SNDRV_PCM_RATE_x equivalent.
*
* This is really something that ALSA should provide.
*
* This table is used by cs4270_set_dai_sysclk() to tell ALSA which sampling
* rates the CS4270 currently supports.
*/
static struct {
unsigned int rate;
unsigned int bit;
} rate_map[] = {
{5512, SNDRV_PCM_RATE_5512},
{8000, SNDRV_PCM_RATE_8000},
{11025, SNDRV_PCM_RATE_11025},
{16000, SNDRV_PCM_RATE_16000},
{22050, SNDRV_PCM_RATE_22050},
{32000, SNDRV_PCM_RATE_32000},
{44100, SNDRV_PCM_RATE_44100},
{48000, SNDRV_PCM_RATE_48000},
{64000, SNDRV_PCM_RATE_64000},
{88200, SNDRV_PCM_RATE_88200},
{96000, SNDRV_PCM_RATE_96000},
{176400, SNDRV_PCM_RATE_176400},
{192000, SNDRV_PCM_RATE_192000}
};
/*
* Determine the CS4270 samples rates.
*
* 'freq' is the input frequency to MCLK. The other parameters are ignored.
*
* The value of MCLK is used to determine which sample rates are supported
* by the CS4270. The ratio of MCLK / Fs must be equal to one of nine
* support values: 64, 96, 128, 192, 256, 384, 512, 768, and 1024.
*
* This function calculates the nine ratios and determines which ones match
* a standard sample rate. If there's a match, then it is added to the list
* of support sample rates.
*
* This function must be called by the machine driver's 'startup' function,
* otherwise the list of supported sample rates will not be available in
* time for ALSA.
*/
static int cs4270_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs4270_private *cs4270 = codec->private_data;
unsigned int rates = 0;
unsigned int rate_min = -1;
unsigned int rate_max = 0;
unsigned int i;
cs4270->mclk = freq;
for (i = 0; i < ARRAY_SIZE(cs4270_mode_ratios); i++) {
unsigned int rate;
unsigned int j;
rate = freq / cs4270_mode_ratios[i].ratio;
for (j = 0; j < ARRAY_SIZE(rate_map); j++) {
if (rate == rate_map[j].rate) {
rates |= rate_map[j].bit;
if (rate < rate_min)
rate_min = rate;
if (rate > rate_max)
rate_max = rate;
}
}
}
if (!rate_max) {
printk(KERN_ERR "cs4270: could not find a valid rate\n");
return -EINVAL;
}
codec_dai->playback.rates = rates;
codec_dai->playback.rate_min = rate_min;
codec_dai->playback.rate_max = rate_max;
codec_dai->capture.rates = rates;
codec_dai->capture.rate_min = rate_min;
codec_dai->capture.rate_max = rate_max;
return 0;
}
/*
* Configure the codec for the selected audio format
*
* This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the
* codec accordingly.
*
* Currently, this function only supports SND_SOC_DAIFMT_I2S and
* SND_SOC_DAIFMT_LEFT_J. The CS4270 codec also supports right-justified
* data for playback only, but ASoC currently does not support different
* formats for playback vs. record.
*/
static int cs4270_set_dai_fmt(struct snd_soc_codec_dai *codec_dai,
unsigned int format)
{
struct snd_soc_codec *codec = codec_dai->codec;
struct cs4270_private *cs4270 = codec->private_data;
int ret = 0;
switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
case SND_SOC_DAIFMT_LEFT_J:
cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK;
break;
default:
printk(KERN_ERR "cs4270: invalid DAI format\n");
ret = -EINVAL;
}
return ret;
}
static int cs4270_i2c_probe(struct i2c_adapter *adap, int addr, int kind);
/*
* Notify the driver that a new I2C bus has been found.
*
* This function is called for each I2C bus in the system. The function
* then asks the I2C subsystem to probe that bus at the addresses on which
* our device (the CS4270) could exist. If a device is found at one of
* those addresses, then our probe function (cs4270_i2c_probe) is called.
*/
static int cs4270_i2c_attach(struct i2c_adapter *adapter)
{
return i2c_probe(adapter, &addr_data, cs4270_i2c_probe);
}
static int cs4270_i2c_detach(struct i2c_client *client)
{
struct snd_soc_codec *codec = i2c_get_clientdata(client);
i2c_detach_client(client);
codec->control_data = NULL;
kfree(codec->reg_cache);
codec->reg_cache = NULL;
kfree(client);
return 0;
}
/* A list of non-DAPM controls that the CS4270 supports */
static const struct snd_kcontrol_new cs4270_snd_controls[] = {
SOC_DOUBLE_R("Master Playback Volume",
CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 0)
};
static struct i2c_driver cs4270_i2c_driver = {
.driver = {
.name = "CS4270 I2C",
.owner = THIS_MODULE,
},
.id = I2C_DRIVERID_CS4270,
.attach_adapter = cs4270_i2c_attach,
.detach_client = cs4270_i2c_detach,
};
/*
* Global variable to store socdev for i2c probe function.
*
* If struct i2c_driver had a private_data field, we wouldn't need to use
* cs4270_socdec. This is the only way to pass the socdev structure to
* cs4270_i2c_probe().
*
* The real solution to cs4270_socdev is to create a mechanism
* that maps I2C addresses to snd_soc_device structures. Perhaps the
* creation of the snd_soc_device object should be moved out of
* cs4270_probe() and into cs4270_i2c_probe(), but that would make this
* driver dependent on I2C. The CS4270 supports "stand-alone" mode, whereby
* the chip is *not* connected to the I2C bus, but is instead configured via
* input pins.
*/
static struct snd_soc_device *cs4270_socdev;
/*
* Initialize the I2C interface of the CS4270
*
* This function is called for whenever the I2C subsystem finds a device
* at a particular address.
*
* Note: snd_soc_new_pcms() must be called before this function can be called,
* because of snd_ctl_add().
*/
static int cs4270_i2c_probe(struct i2c_adapter *adapter, int addr, int kind)
{
struct snd_soc_device *socdev = cs4270_socdev;
struct snd_soc_codec *codec = socdev->codec;
struct i2c_client *i2c_client = NULL;
int i;
int ret = 0;
/* Probing all possible addresses has one drawback: if there are
multiple CS4270s on the bus, then you cannot specify which
socdev is matched with which CS4270. For now, we just reject
this I2C device if the socdev already has one attached. */
if (codec->control_data)
return -ENODEV;
/* Note: codec_dai->codec is NULL here */
i2c_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (!i2c_client) {
printk(KERN_ERR "cs4270: could not allocate I2C client\n");
return -ENOMEM;
}
codec->reg_cache = kzalloc(CS4270_NUMREGS, GFP_KERNEL);
if (!codec->reg_cache) {
printk(KERN_ERR "cs4270: could not allocate register cache\n");
ret = -ENOMEM;
goto error;
}
i2c_set_clientdata(i2c_client, codec);
strcpy(i2c_client->name, "CS4270");
i2c_client->driver = &cs4270_i2c_driver;
i2c_client->adapter = adapter;
i2c_client->addr = addr;
/* Verify that we have a CS4270 */
ret = i2c_smbus_read_byte_data(i2c_client, CS4270_CHIPID);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to read I2C\n");
goto error;
}
/* The top four bits of the chip ID should be 1100. */
if ((ret & 0xF0) != 0xC0) {
/* The device at this address is not a CS4270 codec */
ret = -ENODEV;
goto error;
}
printk(KERN_INFO "cs4270: found device at I2C address %X\n", addr);
printk(KERN_INFO "cs4270: hardware revision %X\n", ret & 0xF);
/* Tell the I2C layer a new client has arrived */
ret = i2c_attach_client(i2c_client);
if (ret) {
printk(KERN_ERR "cs4270: could not attach codec, "
"I2C address %x, error code %i\n", addr, ret);
goto error;
}
codec->control_data = i2c_client;
codec->read = cs4270_read_reg_cache;
codec->write = cs4270_i2c_write;
codec->reg_cache_size = CS4270_NUMREGS;
/* The I2C interface is set up, so pre-fill our register cache */
ret = cs4270_fill_cache(codec);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to fill register cache\n");
goto error;
}
/* Add the non-DAPM controls */
for (i = 0; i < ARRAY_SIZE(cs4270_snd_controls); i++) {
struct snd_kcontrol *kctrl =
snd_soc_cnew(&cs4270_snd_controls[i], codec, NULL);
ret = snd_ctl_add(codec->card, kctrl);
if (ret < 0)
goto error;
}
return 0;
error:
if (codec->control_data) {
i2c_detach_client(i2c_client);
codec->control_data = NULL;
}
kfree(codec->reg_cache);
codec->reg_cache = NULL;
codec->reg_cache_size = 0;
kfree(i2c_client);
return ret;
}
#endif
struct snd_soc_codec_dai cs4270_dai = {
.name = "CS4270",
.playback = {
.stream_name = "Playback",
.channels_min = 1,
.channels_max = 2,
.rates = 0,
.formats = CS4270_FORMATS,
},
.capture = {
.stream_name = "Capture",
.channels_min = 1,
.channels_max = 2,
.rates = 0,
.formats = CS4270_FORMATS,
},
.dai_ops = {
.set_sysclk = cs4270_set_dai_sysclk,
.set_fmt = cs4270_set_dai_fmt,
}
};
EXPORT_SYMBOL_GPL(cs4270_dai);
/*
* ASoC probe function
*
* This function is called when the machine driver calls
* platform_device_add().
*/
static int cs4270_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
int ret = 0;
printk(KERN_INFO "CS4270 ALSA SoC Codec\n");
/* Allocate enough space for the snd_soc_codec structure
and our private data together. */
codec = kzalloc(ALIGN(sizeof(struct snd_soc_codec), 4) +
sizeof(struct cs4270_private), GFP_KERNEL);
if (!codec) {
printk(KERN_ERR "cs4270: Could not allocate codec structure\n");
return -ENOMEM;
}
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
codec->name = "CS4270";
codec->owner = THIS_MODULE;
codec->dai = &cs4270_dai;
codec->num_dai = 1;
codec->private_data = codec + ALIGN(sizeof(struct snd_soc_codec), 4);
socdev->codec = codec;
/* Register PCMs */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to create PCMs\n");
return ret;
}
#ifdef CONFIG_I2C
cs4270_socdev = socdev;
ret = i2c_add_driver(&cs4270_i2c_driver);
if (ret) {
printk(KERN_ERR "cs4270: failed to attach driver");
snd_soc_free_pcms(socdev);
return ret;
}
/* Did we find a CS4270 on the I2C bus? */
if (codec->control_data) {
/* Initialize codec ops */
cs4270_dai.ops.hw_params = cs4270_hw_params;
#ifdef CONFIG_SND_SOC_CS4270_HWMUTE
cs4270_dai.dai_ops.digital_mute = cs4270_mute;
#endif
} else
printk(KERN_INFO "cs4270: no I2C device found, "
"using stand-alone mode\n");
#else
printk(KERN_INFO "cs4270: I2C disabled, using stand-alone mode\n");
#endif
ret = snd_soc_register_card(socdev);
if (ret < 0) {
printk(KERN_ERR "cs4270: failed to register card\n");
snd_soc_free_pcms(socdev);
return ret;
}
return ret;
}
static int cs4270_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
snd_soc_free_pcms(socdev);
#ifdef CONFIG_I2C
if (socdev->codec->control_data)
i2c_del_driver(&cs4270_i2c_driver);
#endif
kfree(socdev->codec);
socdev->codec = NULL;
return 0;
}
/*
* ASoC codec device structure
*
* Assign this variable to the codec_dev field of the machine driver's
* snd_soc_device structure.
*/
struct snd_soc_codec_device soc_codec_device_cs4270 = {
.probe = cs4270_probe,
.remove = cs4270_remove
};
EXPORT_SYMBOL_GPL(soc_codec_device_cs4270);
MODULE_AUTHOR("Timur Tabi <timur@freescale.com>");
MODULE_DESCRIPTION("Cirrus Logic CS4270 ALSA SoC Codec Driver");
MODULE_LICENSE("GPL");

28
sound/soc/codecs/cs4270.h Normal file
View File

@ -0,0 +1,28 @@
/*
* Cirrus Logic CS4270 ALSA SoC Codec Driver
*
* Author: Timur Tabi <timur@freescale.com>
*
* Copyright 2007 Freescale Semiconductor, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef _CS4270_H
#define _CS4270_H
/*
* The ASoC codec DAI structure for the CS4270. Assign this structure to
* the .codec_dai field of your machine driver's snd_soc_dai_link structure.
*/
extern struct snd_soc_codec_dai cs4270_dai;
/*
* The ASoC codec device structure for the CS4270. Assign this structure
* to the .codec_dev field of your machine driver's snd_soc_device
* structure.
*/
extern struct snd_soc_codec_device soc_codec_device_cs4270;
#endif