diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 7ea8749ddf2..8ae4ad0326a 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = { .masks = &pll1_masks, }; +/* pll rate configuration table, in ascending order of rates */ +struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ +}; + /* PLL1 clock */ static struct clk pll1_clk = { + .flags = ENABLED_ON_INIT, .pclk = &osc_24m_clk, .en_reg = PLL1_CTR, .en_reg_bit = PLL_ENABLE, + .calc_rate = &pll_calc_rate, .recalc = &pll_clk_recalc, + .set_rate = &pll_clk_set_rate, + .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, .private_data = &pll1_config, }; @@ -103,11 +113,22 @@ static struct bus_clk_config ahb_config = { .masks = &ahb_masks, }; +/* ahb rate configuration table, in ascending order of rates */ +struct bus_rate_tbl bus_rtbl[] = { + {.div = 3}, /* == parent divided by 4 */ + {.div = 2}, /* == parent divided by 3 */ + {.div = 1}, /* == parent divided by 2 */ + {.div = 0}, /* == parent divided by 1 */ +}; + /* ahb clock */ static struct clk ahb_clk = { .flags = ALWAYS_ENABLED, .pclk = &pll1_clk, + .calc_rate = &bus_calc_rate, .recalc = &bus_clk_recalc, + .set_rate = &bus_clk_set_rate, + .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, .private_data = &ahb_config, }; @@ -123,22 +144,40 @@ static struct aux_clk_masks aux_masks = { .yscale_sel_shift = AUX_YSCALE_SHIFT, }; -/* uart configurations */ -static struct aux_clk_config uart_config = { +/* uart synth configurations */ +static struct aux_clk_config uart_synth_config = { .synth_reg = UART_CLK_SYNT, .masks = &aux_masks, }; +/* aux rate configuration table, in ascending order of rates */ +struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ + {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +/* uart synth clock */ +static struct clk uart_synth_clk = { + .en_reg = UART_CLK_SYNT, + .en_reg_bit = AUX_SYNT_ENB, + .pclk = &pll1_clk, + .calc_rate = &aux_calc_rate, + .recalc = &aux_clk_recalc, + .set_rate = &aux_clk_set_rate, + .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, + .private_data = &uart_synth_config, +}; + /* uart parents */ static struct pclk_info uart_pclk_info[] = { { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, + .pclk = &uart_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, }, { .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, + .pclk_val = AUX_CLK_PLL3_VAL, }, }; @@ -156,26 +195,35 @@ static struct clk uart_clk = { .en_reg_bit = UART_CLK_ENB, .pclk_sel = &uart_pclk_sel, .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &uart_config, + .recalc = &follow_parent, }; /* firda configurations */ -static struct aux_clk_config firda_config = { +static struct aux_clk_config firda_synth_config = { .synth_reg = FIRDA_CLK_SYNT, .masks = &aux_masks, }; +/* firda synth clock */ +static struct clk firda_synth_clk = { + .en_reg = FIRDA_CLK_SYNT, + .en_reg_bit = AUX_SYNT_ENB, + .pclk = &pll1_clk, + .calc_rate = &aux_calc_rate, + .recalc = &aux_clk_recalc, + .set_rate = &aux_clk_set_rate, + .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1}, + .private_data = &firda_synth_config, +}; + /* firda parents */ static struct pclk_info firda_pclk_info[] = { { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, + .pclk = &firda_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, }, { .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, + .pclk_val = AUX_CLK_PLL3_VAL, }, }; @@ -193,29 +241,7 @@ static struct clk firda_clk = { .en_reg_bit = FIRDA_CLK_ENB, .pclk_sel = &firda_pclk_sel, .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &firda_config, -}; - -/* gpt parents */ -static struct pclk_info gpt_pclk_info[] = { - { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, - }, { - .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt_pclk_sel = { - .pclk_info = gpt_pclk_info, - .pclk_count = ARRAY_SIZE(gpt_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, + .recalc = &follow_parent, }; /* gpt synthesizer masks */ @@ -226,51 +252,144 @@ static struct gpt_clk_masks gpt_masks = { .nscale_sel_shift = GPT_NSCALE_SHIFT, }; -/* gpt0 configurations */ -static struct gpt_clk_config gpt0_config = { +/* gpt rate configuration table, in ascending order of rates */ +struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +/* gpt0 synth clk config*/ +static struct gpt_clk_config gpt0_synth_config = { .synth_reg = PRSC1_CLK_CFG, .masks = &gpt_masks, }; +/* gpt synth clock */ +static struct clk gpt0_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, + .recalc = &gpt_clk_recalc, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt0_synth_config, +}; + +/* gpt parents */ +static struct pclk_info gpt0_pclk_info[] = { + { + .pclk = &gpt0_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt0_pclk_sel = { + .pclk_info = gpt0_pclk_info, + .pclk_count = ARRAY_SIZE(gpt0_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + /* gpt0 timer clock */ static struct clk gpt0_clk = { .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt_pclk_sel, + .pclk_sel = &gpt0_pclk_sel, .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt0_config, + .recalc = &follow_parent, }; -/* gpt1 configurations */ -static struct gpt_clk_config gpt1_config = { +/* gpt1 synth clk configurations */ +static struct gpt_clk_config gpt1_synth_config = { .synth_reg = PRSC2_CLK_CFG, .masks = &gpt_masks, }; +/* gpt1 synth clock */ +static struct clk gpt1_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, + .recalc = &gpt_clk_recalc, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt1_synth_config, +}; + +static struct pclk_info gpt1_pclk_info[] = { + { + .pclk = &gpt1_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt1_pclk_sel = { + .pclk_info = gpt1_pclk_info, + .pclk_count = ARRAY_SIZE(gpt1_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + /* gpt1 timer clock */ static struct clk gpt1_clk = { .en_reg = PERIP1_CLK_ENB, .en_reg_bit = GPT1_CLK_ENB, - .pclk_sel = &gpt_pclk_sel, + .pclk_sel = &gpt1_pclk_sel, .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt1_config, + .recalc = &follow_parent, }; -/* gpt2 configurations */ -static struct gpt_clk_config gpt2_config = { +/* gpt2 synth clk configurations */ +static struct gpt_clk_config gpt2_synth_config = { .synth_reg = PRSC3_CLK_CFG, .masks = &gpt_masks, }; +/* gpt1 synth clock */ +static struct clk gpt2_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, + .recalc = &gpt_clk_recalc, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt2_synth_config, +}; + +static struct pclk_info gpt2_pclk_info[] = { + { + .pclk = &gpt2_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt2_pclk_sel = { + .pclk_info = gpt2_pclk_info, + .pclk_count = ARRAY_SIZE(gpt2_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + /* gpt2 timer clock */ static struct clk gpt2_clk = { .en_reg = PERIP1_CLK_ENB, .en_reg_bit = GPT2_CLK_ENB, - .pclk_sel = &gpt_pclk_sel, + .pclk_sel = &gpt2_pclk_sel, .pclk_sel_shift = GPT2_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt2_config, + .recalc = &follow_parent, }; /* clock derived from pll3 clk */ @@ -290,13 +409,6 @@ static struct clk usbd_clk = { .recalc = &follow_parent, }; -/* clcd clock */ -static struct clk clcd_clk = { - .flags = ALWAYS_ENABLED, - .pclk = &pll3_48m_clk, - .recalc = &follow_parent, -}; - /* clock derived from ahb clk */ /* apb masks structure */ static struct bus_clk_masks apb_masks = { @@ -314,7 +426,10 @@ static struct bus_clk_config apb_config = { static struct clk apb_clk = { .flags = ALWAYS_ENABLED, .pclk = &ahb_clk, + .calc_rate = &bus_calc_rate, .recalc = &bus_clk_recalc, + .set_rate = &bus_clk_set_rate, + .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, .private_data = &apb_config, }; @@ -375,8 +490,17 @@ static struct clk adc_clk = { .recalc = &follow_parent, }; +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* emi clock */ +static struct clk emi_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &follow_parent, +}; +#endif + /* ssp clock */ -static struct clk ssp_clk = { +static struct clk ssp0_clk = { .pclk = &apb_clk, .en_reg = PERIP1_CLK_ENB, .en_reg_bit = SSP_CLK_ENB, @@ -393,6 +517,137 @@ static struct clk gpio_clk = { static struct clk dummy_apb_pclk; +#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ + defined(CONFIG_MACH_SPEAR320) +/* fsmc clock */ +static struct clk fsmc_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &follow_parent, +}; +#endif + +/* common clocks to spear310 and spear320 */ +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) +/* uart1 clock */ +static struct clk uart1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* uart2 clock */ +static struct clk uart2_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; +#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ + +/* common clocks to spear300 and spear320 */ +#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) +/* clcd clock */ +static struct clk clcd_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll3_48m_clk, + .recalc = &follow_parent, +}; + +/* sdhci clock */ +static struct clk sdhci_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &follow_parent, +}; +#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ + +/* spear300 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR300 +/* gpio1 clock */ +static struct clk gpio1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* keyboard clock */ +static struct clk kbd_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +#endif + +/* spear310 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR310 +/* uart3 clock */ +static struct clk uart3_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* uart4 clock */ +static struct clk uart4_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* uart5 clock */ +static struct clk uart5_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; +#endif + +/* spear320 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR320 +/* can0 clock */ +static struct clk can0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* can1 clock */ +static struct clk can1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* i2c1 clock */ +static struct clk i2c1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &ahb_clk, + .recalc = &follow_parent, +}; + +/* ssp1 clock */ +static struct clk ssp1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* ssp2 clock */ +static struct clk ssp2_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; + +/* pwm clock */ +static struct clk pwm_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &apb_clk, + .recalc = &follow_parent, +}; +#endif + /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, @@ -400,7 +655,7 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc", .clk = &rtc_clk}, + { .dev_id = "rtc-spear", .clk = &rtc_clk}, /* clock derived from 24 MHz osc clk */ { .con_id = "pll1_clk", .clk = &pll1_clk}, { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, @@ -408,18 +663,22 @@ static struct clk_lookup spear_clk_lookups[] = { /* clock derived from pll1 clk */ { .con_id = "cpu_clk", .clk = &cpu_clk}, { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, + { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, + { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, + { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, + { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, { .dev_id = "uart", .clk = &uart_clk}, { .dev_id = "firda", .clk = &firda_clk}, { .dev_id = "gpt0", .clk = &gpt0_clk}, { .dev_id = "gpt1", .clk = &gpt1_clk}, { .dev_id = "gpt2", .clk = &gpt2_clk}, /* clock derived from pll3 clk */ - { .dev_id = "usbh", .clk = &usbh_clk}, + { .con_id = "usbh_clk", .clk = &usbh_clk}, { .dev_id = "usbd", .clk = &usbd_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, /* clock derived from ahb clk */ { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, { .dev_id = "dma", .clk = &dma_clk}, { .dev_id = "jpeg", .clk = &jpeg_clk}, { .dev_id = "gmac", .clk = &gmac_clk}, @@ -427,8 +686,50 @@ static struct clk_lookup spear_clk_lookups[] = { { .dev_id = "c3", .clk = &c3_clk}, /* clock derived from apb clk */ { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp", .clk = &ssp_clk}, + { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, { .dev_id = "gpio", .clk = &gpio_clk}, +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) + { .dev_id = "physmap-flash", .clk = &emi_clk}, +#endif +#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \ + defined(CONFIG_MACH_SPEAR320) + { .con_id = "fsmc", .clk = &fsmc_clk}, +#endif + +/* common clocks to spear310 and spear320 */ +#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) + { .dev_id = "uart1", .clk = &uart1_clk}, + { .dev_id = "uart2", .clk = &uart2_clk}, +#endif + + /* common clock to spear300 and spear320 */ +#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320) + { .dev_id = "clcd", .clk = &clcd_clk}, + { .dev_id = "sdhci", .clk = &sdhci_clk}, +#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */ + + /* spear300 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR300 + { .dev_id = "gpio1", .clk = &gpio1_clk}, + { .dev_id = "keyboard", .clk = &kbd_clk}, +#endif + + /* spear310 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR310 + { .dev_id = "uart3", .clk = &uart3_clk}, + { .dev_id = "uart4", .clk = &uart4_clk}, + { .dev_id = "uart5", .clk = &uart5_clk}, + +#endif + /* spear320 machine specific clock structures */ +#ifdef CONFIG_MACH_SPEAR320 + { .dev_id = "c_can_platform.0", .clk = &can0_clk}, + { .dev_id = "c_can_platform.1", .clk = &can1_clk}, + { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, + { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, + { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, + { .dev_id = "pwm", .clk = &pwm_clk}, +#endif }; void __init clk_init(void) diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 6c919e1f9c4..0b93347c0f1 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -63,8 +63,8 @@ #define GPT1_CLK_SHIFT 11 #define GPT2_CLK_SHIFT 12 #define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_MASK 0 -#define AUX_CLK_PLL1_MASK 1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 #define PERIP1_CLK_ENB (MISC_BASE + 0x02C) /* PERIP1_CLK_ENB register masks */ @@ -113,6 +113,7 @@ #define RAS3_CLK_SYNT (MISC_BASE + 0x074) #define RAS4_CLK_SYNT (MISC_BASE + 0x078) /* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 #define AUX_EQ_SEL_SHIFT 30 #define AUX_EQ_SEL_MASK 1 #define AUX_EQ1_SEL 0 diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index ef88922986e..91719524766 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -60,12 +60,22 @@ static struct pll_clk_config pll1_config = { .masks = &pll1_masks, }; +/* pll rate configuration table, in ascending order of rates */ +struct pll_rate_tbl pll_rtbl[] = { + {.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */ + {.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */ +}; + /* PLL1 clock */ static struct clk pll1_clk = { + .flags = ENABLED_ON_INIT, .pclk = &osc_30m_clk, .en_reg = PLL1_CTR, .en_reg_bit = PLL_ENABLE, + .calc_rate = &pll_calc_rate, .recalc = &pll_clk_recalc, + .set_rate = &pll_clk_set_rate, + .rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1}, .private_data = &pll1_config, }; @@ -103,35 +113,25 @@ static struct bus_clk_config ahb_config = { .masks = &ahb_masks, }; +/* ahb rate configuration table, in ascending order of rates */ +struct bus_rate_tbl bus_rtbl[] = { + {.div = 3}, /* == parent divided by 4 */ + {.div = 2}, /* == parent divided by 3 */ + {.div = 1}, /* == parent divided by 2 */ + {.div = 0}, /* == parent divided by 1 */ +}; + /* ahb clock */ static struct clk ahb_clk = { .flags = ALWAYS_ENABLED, .pclk = &pll1_clk, + .calc_rate = &bus_calc_rate, .recalc = &bus_clk_recalc, + .set_rate = &bus_clk_set_rate, + .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, .private_data = &ahb_config, }; -/* uart parents */ -static struct pclk_info uart_pclk_info[] = { - { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, - }, { - .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, - }, -}; - -/* uart parent select structure */ -static struct pclk_sel uart_pclk_sel = { - .pclk_info = uart_pclk_info, - .pclk_count = ARRAY_SIZE(uart_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = UART_CLK_MASK, -}; - /* auxiliary synthesizers masks */ static struct aux_clk_masks aux_masks = { .eq_sel_mask = AUX_EQ_SEL_MASK, @@ -145,19 +145,57 @@ static struct aux_clk_masks aux_masks = { }; /* uart configurations */ -static struct aux_clk_config uart_config = { +static struct aux_clk_config uart_synth_config = { .synth_reg = UART_CLK_SYNT, .masks = &aux_masks, }; +/* aux rate configuration table, in ascending order of rates */ +struct aux_rate_tbl aux_rtbl[] = { + /* For PLL1 = 332 MHz */ + {.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */ + {.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ +}; + +/* uart synth clock */ +static struct clk uart_synth_clk = { + .en_reg = UART_CLK_SYNT, + .en_reg_bit = AUX_SYNT_ENB, + .pclk = &pll1_clk, + .calc_rate = &aux_calc_rate, + .recalc = &aux_clk_recalc, + .set_rate = &aux_clk_set_rate, + .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, + .private_data = &uart_synth_config, +}; + +/* uart parents */ +static struct pclk_info uart_pclk_info[] = { + { + .pclk = &uart_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* uart parent select structure */ +static struct pclk_sel uart_pclk_sel = { + .pclk_info = uart_pclk_info, + .pclk_count = ARRAY_SIZE(uart_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = UART_CLK_MASK, +}; + /* uart0 clock */ static struct clk uart0_clk = { .en_reg = PERIP1_CLK_ENB, .en_reg_bit = UART0_CLK_ENB, .pclk_sel = &uart_pclk_sel, .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &uart_config, + .recalc = &follow_parent, }; /* uart1 clock */ @@ -166,26 +204,35 @@ static struct clk uart1_clk = { .en_reg_bit = UART1_CLK_ENB, .pclk_sel = &uart_pclk_sel, .pclk_sel_shift = UART_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &uart_config, + .recalc = &follow_parent, }; /* firda configurations */ -static struct aux_clk_config firda_config = { +static struct aux_clk_config firda_synth_config = { .synth_reg = FIRDA_CLK_SYNT, .masks = &aux_masks, }; +/* firda synth clock */ +static struct clk firda_synth_clk = { + .en_reg = FIRDA_CLK_SYNT, + .en_reg_bit = AUX_SYNT_ENB, + .pclk = &pll1_clk, + .calc_rate = &aux_calc_rate, + .recalc = &aux_clk_recalc, + .set_rate = &aux_clk_set_rate, + .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, + .private_data = &firda_synth_config, +}; + /* firda parents */ static struct pclk_info firda_pclk_info[] = { { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, + .pclk = &firda_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, }, { .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, + .pclk_val = AUX_CLK_PLL3_VAL, }, }; @@ -203,26 +250,35 @@ static struct clk firda_clk = { .en_reg_bit = FIRDA_CLK_ENB, .pclk_sel = &firda_pclk_sel, .pclk_sel_shift = FIRDA_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &firda_config, + .recalc = &follow_parent, }; /* clcd configurations */ -static struct aux_clk_config clcd_config = { +static struct aux_clk_config clcd_synth_config = { .synth_reg = CLCD_CLK_SYNT, .masks = &aux_masks, }; +/* firda synth clock */ +static struct clk clcd_synth_clk = { + .en_reg = CLCD_CLK_SYNT, + .en_reg_bit = AUX_SYNT_ENB, + .pclk = &pll1_clk, + .calc_rate = &aux_calc_rate, + .recalc = &aux_clk_recalc, + .set_rate = &aux_clk_set_rate, + .rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 2}, + .private_data = &clcd_synth_config, +}; + /* clcd parents */ static struct pclk_info clcd_pclk_info[] = { { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, + .pclk = &clcd_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, }, { .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, + .pclk_val = AUX_CLK_PLL3_VAL, }, }; @@ -240,29 +296,7 @@ static struct clk clcd_clk = { .en_reg_bit = CLCD_CLK_ENB, .pclk_sel = &clcd_pclk_sel, .pclk_sel_shift = CLCD_CLK_SHIFT, - .recalc = &aux_clk_recalc, - .private_data = &clcd_config, -}; - -/* gpt parents */ -static struct pclk_info gpt_pclk_info[] = { - { - .pclk = &pll1_clk, - .pclk_mask = AUX_CLK_PLL1_MASK, - .scalable = 1, - }, { - .pclk = &pll3_48m_clk, - .pclk_mask = AUX_CLK_PLL3_MASK, - .scalable = 0, - }, -}; - -/* gpt parent select structure */ -static struct pclk_sel gpt_pclk_sel = { - .pclk_info = gpt_pclk_info, - .pclk_count = ARRAY_SIZE(gpt_pclk_info), - .pclk_sel_reg = PERIP_CLK_CFG, - .pclk_sel_mask = GPT_CLK_MASK, + .recalc = &follow_parent, }; /* gpt synthesizer masks */ @@ -273,60 +307,162 @@ static struct gpt_clk_masks gpt_masks = { .nscale_sel_shift = GPT_NSCALE_SHIFT, }; -/* gpt0_1 configurations */ -static struct gpt_clk_config gpt0_1_config = { +/* gpt rate configuration table, in ascending order of rates */ +struct gpt_rate_tbl gpt_rtbl[] = { + /* For pll1 = 332 MHz */ + {.mscale = 4, .nscale = 0}, /* 41.5 MHz */ + {.mscale = 2, .nscale = 0}, /* 55.3 MHz */ + {.mscale = 1, .nscale = 0}, /* 83 MHz */ +}; + +/* gpt0 synth clk config*/ +static struct gpt_clk_config gpt0_synth_config = { .synth_reg = PRSC1_CLK_CFG, .masks = &gpt_masks, }; +/* gpt synth clock */ +static struct clk gpt0_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, + .recalc = &gpt_clk_recalc, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt0_synth_config, +}; + +/* gpt parents */ +static struct pclk_info gpt0_pclk_info[] = { + { + .pclk = &gpt0_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt0_pclk_sel = { + .pclk_info = gpt0_pclk_info, + .pclk_count = ARRAY_SIZE(gpt0_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + /* gpt0 ARM1 subsystem timer clock */ static struct clk gpt0_clk = { .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt_pclk_sel, + .pclk_sel = &gpt0_pclk_sel, .pclk_sel_shift = GPT0_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt0_1_config, + .recalc = &follow_parent, +}; + + +/* Note: gpt0 and gpt1 share same parent clocks */ +/* gpt parent select structure */ +static struct pclk_sel gpt1_pclk_sel = { + .pclk_info = gpt0_pclk_info, + .pclk_count = ARRAY_SIZE(gpt0_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, }; /* gpt1 timer clock */ static struct clk gpt1_clk = { .flags = ALWAYS_ENABLED, - .pclk_sel = &gpt_pclk_sel, + .pclk_sel = &gpt1_pclk_sel, .pclk_sel_shift = GPT1_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt0_1_config, + .recalc = &follow_parent, }; -/* gpt2 configurations */ -static struct gpt_clk_config gpt2_config = { +/* gpt2 synth clk config*/ +static struct gpt_clk_config gpt2_synth_config = { .synth_reg = PRSC2_CLK_CFG, .masks = &gpt_masks, }; -/* gpt2 timer clock */ -static struct clk gpt2_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT2_CLK_ENB, - .pclk_sel = &gpt_pclk_sel, - .pclk_sel_shift = GPT2_CLK_SHIFT, +/* gpt synth clock */ +static struct clk gpt2_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, .recalc = &gpt_clk_recalc, - .private_data = &gpt2_config, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt2_synth_config, }; -/* gpt3 configurations */ -static struct gpt_clk_config gpt3_config = { +/* gpt parents */ +static struct pclk_info gpt2_pclk_info[] = { + { + .pclk = &gpt2_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt2_pclk_sel = { + .pclk_info = gpt2_pclk_info, + .pclk_count = ARRAY_SIZE(gpt2_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + +/* gpt2 timer clock */ +static struct clk gpt2_clk = { + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt2_pclk_sel, + .pclk_sel_shift = GPT2_CLK_SHIFT, + .recalc = &follow_parent, +}; + +/* gpt3 synth clk config*/ +static struct gpt_clk_config gpt3_synth_config = { .synth_reg = PRSC3_CLK_CFG, .masks = &gpt_masks, }; +/* gpt synth clock */ +static struct clk gpt3_synth_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &pll1_clk, + .calc_rate = &gpt_calc_rate, + .recalc = &gpt_clk_recalc, + .set_rate = &gpt_clk_set_rate, + .rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2}, + .private_data = &gpt3_synth_config, +}; + +/* gpt parents */ +static struct pclk_info gpt3_pclk_info[] = { + { + .pclk = &gpt3_synth_clk, + .pclk_val = AUX_CLK_PLL1_VAL, + }, { + .pclk = &pll3_48m_clk, + .pclk_val = AUX_CLK_PLL3_VAL, + }, +}; + +/* gpt parent select structure */ +static struct pclk_sel gpt3_pclk_sel = { + .pclk_info = gpt3_pclk_info, + .pclk_count = ARRAY_SIZE(gpt3_pclk_info), + .pclk_sel_reg = PERIP_CLK_CFG, + .pclk_sel_mask = GPT_CLK_MASK, +}; + /* gpt3 timer clock */ static struct clk gpt3_clk = { - .en_reg = PERIP1_CLK_ENB, - .en_reg_bit = GPT3_CLK_ENB, - .pclk_sel = &gpt_pclk_sel, + .flags = ALWAYS_ENABLED, + .pclk_sel = &gpt3_pclk_sel, .pclk_sel_shift = GPT3_CLK_SHIFT, - .recalc = &gpt_clk_recalc, - .private_data = &gpt3_config, + .recalc = &follow_parent, }; /* clock derived from pll3 clk */ @@ -371,7 +507,10 @@ static struct bus_clk_config apb_config = { static struct clk apb_clk = { .flags = ALWAYS_ENABLED, .pclk = &ahb_clk, + .calc_rate = &bus_calc_rate, .recalc = &bus_clk_recalc, + .set_rate = &bus_clk_set_rate, + .rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2}, .private_data = &apb_config, }; @@ -488,7 +627,7 @@ static struct clk_lookup spear_clk_lookups[] = { { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc", .clk = &rtc_clk}, + { .dev_id = "rtc-spear", .clk = &rtc_clk}, /* clock derived from 30 MHz os clk */ { .con_id = "pll1_clk", .clk = &pll1_clk}, { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, @@ -496,6 +635,12 @@ static struct clk_lookup spear_clk_lookups[] = { /* clock derived from pll1 clk */ { .con_id = "cpu_clk", .clk = &cpu_clk}, { .con_id = "ahb_clk", .clk = &ahb_clk}, + { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, + { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, + { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, + { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, + { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, + { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, { .dev_id = "uart0", .clk = &uart0_clk}, { .dev_id = "uart1", .clk = &uart1_clk}, { .dev_id = "firda", .clk = &firda_clk}, @@ -505,22 +650,22 @@ static struct clk_lookup spear_clk_lookups[] = { { .dev_id = "gpt2", .clk = &gpt2_clk}, { .dev_id = "gpt3", .clk = &gpt3_clk}, /* clock derived from pll3 clk */ - { .dev_id = "usbh0", .clk = &usbh0_clk}, - { .dev_id = "usbh1", .clk = &usbh1_clk}, + { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, + { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, { .dev_id = "usbd", .clk = &usbd_clk}, /* clock derived from ahb clk */ { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c", .clk = &i2c_clk}, + { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, { .dev_id = "dma", .clk = &dma_clk}, { .dev_id = "jpeg", .clk = &jpeg_clk}, { .dev_id = "gmac", .clk = &gmac_clk}, { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc", .clk = &fsmc_clk}, + { .con_id = "fsmc", .clk = &fsmc_clk}, /* clock derived from apb clk */ { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp0", .clk = &ssp0_clk}, - { .dev_id = "ssp1", .clk = &ssp1_clk}, - { .dev_id = "ssp2", .clk = &ssp2_clk}, + { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, + { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, + { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, { .dev_id = "gpio0", .clk = &gpio0_clk}, { .dev_id = "gpio1", .clk = &gpio1_clk}, { .dev_id = "gpio2", .clk = &gpio2_clk}, diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index d15317788d0..45571c13227 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -66,8 +66,8 @@ #define GPT2_CLK_SHIFT 11 #define GPT3_CLK_SHIFT 12 #define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_MASK 0 -#define AUX_CLK_PLL1_MASK 1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 #define PERIP1_CLK_ENB (MISC_BASE + 0x02C) /* PERIP1_CLK_ENB register masks */ @@ -123,6 +123,7 @@ #define RAS3_CLK_SYNT (MISC_BASE + 0x074) #define RAS4_CLK_SYNT (MISC_BASE + 0x078) /* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 #define AUX_EQ_SEL_SHIFT 30 #define AUX_EQ_SEL_MASK 1 #define AUX_EQ1_SEL 0 diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c index f1cf832e4e3..7e7ab606dc4 100644 --- a/arch/arm/plat-spear/clock.c +++ b/arch/arm/plat-spear/clock.c @@ -12,6 +12,7 @@ */ #include +#include #include #include #include @@ -22,7 +23,7 @@ static DEFINE_SPINLOCK(clocks_lock); static LIST_HEAD(root_clks); -static void propagate_rate(struct list_head *); +static void propagate_rate(struct clk *, int on_init); static int generic_clk_enable(struct clk *clk) { @@ -64,6 +65,100 @@ static struct clkops generic_clkops = { .disable = generic_clk_disable, }; +/* returns current programmed clocks clock info structure */ +static struct pclk_info *pclk_info_get(struct clk *clk) +{ + unsigned int val, i; + struct pclk_info *info = NULL; + + val = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) + & clk->pclk_sel->pclk_sel_mask; + + for (i = 0; i < clk->pclk_sel->pclk_count; i++) { + if (clk->pclk_sel->pclk_info[i].pclk_val == val) + info = &clk->pclk_sel->pclk_info[i]; + } + + return info; +} + +/* + * Set Update pclk, and pclk_info of clk and add clock sibling node to current + * parents children list + */ +static void clk_reparent(struct clk *clk, struct pclk_info *pclk_info) +{ + unsigned long flags; + + spin_lock_irqsave(&clocks_lock, flags); + list_del(&clk->sibling); + list_add(&clk->sibling, &pclk_info->pclk->children); + + clk->pclk = pclk_info->pclk; + spin_unlock_irqrestore(&clocks_lock, flags); +} + +static void do_clk_disable(struct clk *clk) +{ + if (!clk) + return; + + if (!clk->usage_count) { + WARN_ON(1); + return; + } + + clk->usage_count--; + + if (clk->usage_count == 0) { + /* + * Surely, there are no active childrens or direct users + * of this clock + */ + if (clk->pclk) + do_clk_disable(clk->pclk); + + if (clk->ops && clk->ops->disable) + clk->ops->disable(clk); + } +} + +static int do_clk_enable(struct clk *clk) +{ + int ret = 0; + + if (!clk) + return -EFAULT; + + if (clk->usage_count == 0) { + if (clk->pclk) { + ret = do_clk_enable(clk->pclk); + if (ret) + goto err; + } + if (clk->ops && clk->ops->enable) { + ret = clk->ops->enable(clk); + if (ret) { + if (clk->pclk) + do_clk_disable(clk->pclk); + goto err; + } + } + /* + * Since the clock is going to be used for the first + * time please reclac + */ + if (clk->recalc) { + ret = clk->recalc(clk); + if (ret) + goto err; + } + } + clk->usage_count++; +err: + return ret; +} + /* * clk_enable - inform the system when the clock source should be running. * @clk: clock source @@ -77,17 +172,9 @@ int clk_enable(struct clk *clk) unsigned long flags; int ret = 0; - if (!clk || IS_ERR(clk)) - return -EFAULT; - spin_lock_irqsave(&clocks_lock, flags); - if (clk->usage_count == 0) { - if (clk->ops && clk->ops->enable) - ret = clk->ops->enable(clk); - } - clk->usage_count++; + ret = do_clk_enable(clk); spin_unlock_irqrestore(&clocks_lock, flags); - return ret; } EXPORT_SYMBOL(clk_enable); @@ -108,17 +195,8 @@ void clk_disable(struct clk *clk) { unsigned long flags; - if (!clk || IS_ERR(clk)) - return; - - WARN_ON(clk->usage_count == 0); - spin_lock_irqsave(&clocks_lock, flags); - clk->usage_count--; - if (clk->usage_count == 0) { - if (clk->ops && clk->ops->disable) - clk->ops->disable(clk); - } + do_clk_disable(clk); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); @@ -152,15 +230,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent) int i, found = 0, val = 0; unsigned long flags; - if (!clk || IS_ERR(clk) || !parent || IS_ERR(parent)) + if (!clk || !parent) return -EFAULT; - if (clk->usage_count) - return -EBUSY; - if (!clk->pclk_sel) - return -EPERM; if (clk->pclk == parent) return 0; + if (!clk->pclk_sel) + return -EPERM; + /* check if requested parent is in clk parent list */ for (i = 0; i < clk->pclk_sel->pclk_count; i++) { if (clk->pclk_sel->pclk_info[i].pclk == parent) { found = 1; @@ -175,13 +252,14 @@ int clk_set_parent(struct clk *clk, struct clk *parent) /* reflect parent change in hardware */ val = readl(clk->pclk_sel->pclk_sel_reg); val &= ~(clk->pclk_sel->pclk_sel_mask << clk->pclk_sel_shift); - val |= clk->pclk_sel->pclk_info[i].pclk_mask << clk->pclk_sel_shift; + val |= clk->pclk_sel->pclk_info[i].pclk_val << clk->pclk_sel_shift; writel(val, clk->pclk_sel->pclk_sel_reg); spin_unlock_irqrestore(&clocks_lock, flags); /* reflect parent change in software */ - clk->recalc(clk); - propagate_rate(&clk->children); + clk_reparent(clk, &clk->pclk_sel->pclk_info[i]); + + propagate_rate(clk, 0); return 0; } EXPORT_SYMBOL(clk_set_parent); @@ -195,19 +273,37 @@ EXPORT_SYMBOL(clk_set_parent); */ int clk_set_rate(struct clk *clk, unsigned long rate) { - /* TODO */ - return -EINVAL; + unsigned long flags; + int ret = -EINVAL; + + if (!clk || !rate) + return -EFAULT; + + if (clk->set_rate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->set_rate(clk, rate); + if (!ret) + /* if successful -> propagate */ + propagate_rate(clk, 0); + spin_unlock_irqrestore(&clocks_lock, flags); + } else if (clk->pclk) { + u32 mult = clk->div_factor ? clk->div_factor : 1; + ret = clk_set_rate(clk->pclk, mult * rate); + } + + return ret; } EXPORT_SYMBOL(clk_set_rate); /* registers clock in platform clock framework */ void clk_register(struct clk_lookup *cl) { - struct clk *clk = cl->clk; + struct clk *clk; unsigned long flags; - if (!clk || IS_ERR(clk)) + if (!cl || !cl->clk) return; + clk = cl->clk; spin_lock_irqsave(&clocks_lock, flags); @@ -220,15 +316,24 @@ void clk_register(struct clk_lookup *cl) /* root clock don't have any parents */ if (!clk->pclk && !clk->pclk_sel) { list_add(&clk->sibling, &root_clks); - /* add clocks with only one parent to parent's children list */ } else if (clk->pclk && !clk->pclk_sel) { + /* add clocks with only one parent to parent's children list */ list_add(&clk->sibling, &clk->pclk->children); } else { - /* add clocks with > 1 parent to 1st parent's children list */ - clk->pclk = clk->pclk_sel->pclk_info[0].pclk; - list_add(&clk->sibling, - &clk->pclk_sel->pclk_info[0].pclk->children); + /* clocks with more than one parent */ + struct pclk_info *pclk_info; + + pclk_info = pclk_info_get(clk); + if (!pclk_info) { + pr_err("CLKDEV: invalid pclk info of clk with" + " %s dev_id and %s con_id\n", + cl->dev_id, cl->con_id); + } else { + clk->pclk = pclk_info->pclk; + list_add(&clk->sibling, &pclk_info->pclk->children); + } } + spin_unlock_irqrestore(&clocks_lock, flags); /* add clock to arm clockdev framework */ @@ -236,56 +341,142 @@ void clk_register(struct clk_lookup *cl) } /** - * propagate_rate - recalculate and propagate all clocks in list head + * propagate_rate - recalculate and propagate all clocks to children + * @pclk: parent clock required to be propogated + * @on_init: flag for enabling clocks which are ENABLED_ON_INIT. * - * Recalculates all root clocks in list head, which if the clock's .recalc is - * set correctly, should also propagate their rates. + * Recalculates all children clocks */ -static void propagate_rate(struct list_head *lhead) +void propagate_rate(struct clk *pclk, int on_init) { - struct clk *clkp, *_temp; + struct clk *clk, *_temp; + int ret = 0; - list_for_each_entry_safe(clkp, _temp, lhead, sibling) { - if (clkp->recalc) - clkp->recalc(clkp); - propagate_rate(&clkp->children); + list_for_each_entry_safe(clk, _temp, &pclk->children, sibling) { + if (clk->recalc) { + ret = clk->recalc(clk); + /* + * recalc will return error if clk out is not programmed + * In this case configure default rate. + */ + if (ret && clk->set_rate) + clk->set_rate(clk, 0); + } + propagate_rate(clk, on_init); + + if (!on_init) + continue; + + /* Enable clks enabled on init, in software view */ + if (clk->flags & ENABLED_ON_INIT) + do_clk_enable(clk); } } -/* returns current programmed clocks clock info structure */ -static struct pclk_info *pclk_info_get(struct clk *clk) +/** + * round_rate_index - return closest programmable rate index in rate_config tbl + * @clk: ptr to clock structure + * @drate: desired rate + * @rate: final rate will be returned in this variable only. + * + * Finds index in rate_config for highest clk rate which is less than + * requested rate. If there is no clk rate lesser than requested rate then + * -EINVAL is returned. This routine assumes that rate_config is written + * in incrementing order of clk rates. + * If drate passed is zero then default rate is programmed. + */ +static int +round_rate_index(struct clk *clk, unsigned long drate, unsigned long *rate) { - unsigned int mask, i; - unsigned long flags; - struct pclk_info *info = NULL; + unsigned long tmp = 0, prev_rate = 0; + int index; - spin_lock_irqsave(&clocks_lock, flags); - mask = (readl(clk->pclk_sel->pclk_sel_reg) >> clk->pclk_sel_shift) - & clk->pclk_sel->pclk_sel_mask; + if (!clk->calc_rate) + return -EFAULT; - for (i = 0; i < clk->pclk_sel->pclk_count; i++) { - if (clk->pclk_sel->pclk_info[i].pclk_mask == mask) - info = &clk->pclk_sel->pclk_info[i]; + if (!drate) + return -EINVAL; + + /* + * This loops ends on two conditions: + * - as soon as clk is found with rate greater than requested rate. + * - if all clks in rate_config are smaller than requested rate. + */ + for (index = 0; index < clk->rate_config.count; index++) { + prev_rate = tmp; + tmp = clk->calc_rate(clk, index); + if (drate < tmp) { + index--; + break; + } } - spin_unlock_irqrestore(&clocks_lock, flags); + /* return if can't find suitable clock */ + if (index < 0) { + index = -EINVAL; + *rate = 0; + } else if (index == clk->rate_config.count) { + /* program with highest clk rate possible */ + index = clk->rate_config.count - 1; + *rate = tmp; + } else + *rate = prev_rate; - return info; + return index; } +/** + * clk_round_rate - adjust a rate to the exact rate a clock can provide + * @clk: clock source + * @rate: desired clock rate in Hz + * + * Returns rounded clock rate in Hz, or negative errno. + */ +long clk_round_rate(struct clk *clk, unsigned long drate) +{ + long rate = 0; + int index; + + /* + * propagate call to parent who supports calc_rate. Similar approach is + * used in clk_set_rate. + */ + if (!clk->calc_rate) { + u32 mult; + if (!clk->pclk) + return clk->rate; + + mult = clk->div_factor ? clk->div_factor : 1; + return clk_round_rate(clk->pclk, mult * drate) / mult; + } + + index = round_rate_index(clk, drate, &rate); + if (index >= 0) + return rate; + else + return index; +} +EXPORT_SYMBOL(clk_round_rate); + +/*All below functions are called with lock held */ + /* - * Set pclk as cclk's parent and add clock sibling node to current parents - * children list + * Calculates pll clk rate for specific value of mode, m, n and p + * + * In normal mode + * rate = (2 * M[15:8] * Fin)/(N * 2^P) + * + * In Dithered mode + * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) */ -static void change_parent(struct clk *cclk, struct clk *pclk) +unsigned long pll_calc_rate(struct clk *clk, int index) { - unsigned long flags; + unsigned long rate = clk->pclk->rate; + struct pll_rate_tbl *tbls = clk->rate_config.tbls; + unsigned int mode; - spin_lock_irqsave(&clocks_lock, flags); - list_del(&cclk->sibling); - list_add(&cclk->sibling, &pclk->children); - - cclk->pclk = pclk; - spin_unlock_irqrestore(&clocks_lock, flags); + mode = tbls[index].mode ? 256 : 1; + return (((2 * rate / 10000) * tbls[index].m) / + (mode * tbls[index].n * (1 << tbls[index].p))) * 10000; } /* @@ -297,13 +488,11 @@ static void change_parent(struct clk *cclk, struct clk *pclk) * In Dithered mode * rate = (2 * M[15:0] * Fin)/(256 * N * 2^P) */ -void pll_clk_recalc(struct clk *clk) +int pll_clk_recalc(struct clk *clk) { struct pll_clk_config *config = clk->private_data; unsigned int num = 2, den = 0, val, mode = 0; - unsigned long flags; - spin_lock_irqsave(&clocks_lock, flags); mode = (readl(config->mode_reg) >> config->masks->mode_shift) & config->masks->mode_mask; @@ -325,22 +514,120 @@ void pll_clk_recalc(struct clk *clk) den *= 256; } + if (!den) + return -EINVAL; + clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; - spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} + +/* + * Configures new clock rate of pll + */ +int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate) +{ + struct pll_rate_tbl *tbls = clk->rate_config.tbls; + struct pll_clk_config *config = clk->private_data; + unsigned long val, rate; + int i; + + i = round_rate_index(clk, desired_rate, &rate); + if (i < 0) + return i; + + val = readl(config->mode_reg) & + ~(config->masks->mode_mask << config->masks->mode_shift); + val |= (tbls[i].mode & config->masks->mode_mask) << + config->masks->mode_shift; + writel(val, config->mode_reg); + + val = readl(config->cfg_reg) & + ~(config->masks->div_p_mask << config->masks->div_p_shift); + val |= (tbls[i].p & config->masks->div_p_mask) << + config->masks->div_p_shift; + val &= ~(config->masks->div_n_mask << config->masks->div_n_shift); + val |= (tbls[i].n & config->masks->div_n_mask) << + config->masks->div_n_shift; + val &= ~(config->masks->dith_fdbk_m_mask << + config->masks->dith_fdbk_m_shift); + if (tbls[i].mode) + val |= (tbls[i].m & config->masks->dith_fdbk_m_mask) << + config->masks->dith_fdbk_m_shift; + else + val |= (tbls[i].m & config->masks->norm_fdbk_m_mask) << + config->masks->norm_fdbk_m_shift; + + writel(val, config->cfg_reg); + + clk->rate = rate; + + return 0; +} + +/* + * Calculates ahb, apb clk rate for specific value of div + */ +unsigned long bus_calc_rate(struct clk *clk, int index) +{ + unsigned long rate = clk->pclk->rate; + struct bus_rate_tbl *tbls = clk->rate_config.tbls; + + return rate / (tbls[index].div + 1); } /* calculates current programmed rate of ahb or apb bus */ -void bus_clk_recalc(struct clk *clk) +int bus_clk_recalc(struct clk *clk) { struct bus_clk_config *config = clk->private_data; unsigned int div; - unsigned long flags; - spin_lock_irqsave(&clocks_lock, flags); div = ((readl(config->reg) >> config->masks->shift) & config->masks->mask) + 1; + + if (!div) + return -EINVAL; + clk->rate = (unsigned long)clk->pclk->rate / div; - spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} + +/* Configures new clock rate of AHB OR APB bus */ +int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate) +{ + struct bus_rate_tbl *tbls = clk->rate_config.tbls; + struct bus_clk_config *config = clk->private_data; + unsigned long val, rate; + int i; + + i = round_rate_index(clk, desired_rate, &rate); + if (i < 0) + return i; + + val = readl(config->reg) & + ~(config->masks->mask << config->masks->shift); + val |= (tbls[i].div & config->masks->mask) << config->masks->shift; + writel(val, config->reg); + + clk->rate = rate; + + return 0; +} + +/* + * gives rate for different values of eq, x and y + * + * Fout from synthesizer can be given from two equations: + * Fout1 = (Fin * X/Y)/2 EQ1 + * Fout2 = Fin * X/Y EQ2 + */ +unsigned long aux_calc_rate(struct clk *clk, int index) +{ + unsigned long rate = clk->pclk->rate; + struct aux_rate_tbl *tbls = clk->rate_config.tbls; + u8 eq = tbls[index].eq ? 1 : 2; + + return (((rate/10000) * tbls[index].xscale) / + (tbls[index].yscale * eq)) * 10000; } /* @@ -353,47 +640,76 @@ void bus_clk_recalc(struct clk *clk) * * Selection of eqn 1 or 2 is programmed in register */ -void aux_clk_recalc(struct clk *clk) +int aux_clk_recalc(struct clk *clk) { struct aux_clk_config *config = clk->private_data; - struct pclk_info *pclk_info = NULL; unsigned int num = 1, den = 1, val, eqn; - unsigned long flags; - /* get current programmed parent */ - pclk_info = pclk_info_get(clk); - if (!pclk_info) { - spin_lock_irqsave(&clocks_lock, flags); - clk->pclk = NULL; - clk->rate = 0; - spin_unlock_irqrestore(&clocks_lock, flags); - return; - } + val = readl(config->synth_reg); - change_parent(clk, pclk_info->pclk); + eqn = (val >> config->masks->eq_sel_shift) & + config->masks->eq_sel_mask; + if (eqn == config->masks->eq1_mask) + den *= 2; - spin_lock_irqsave(&clocks_lock, flags); - if (pclk_info->scalable) { - val = readl(config->synth_reg); + /* calculate numerator */ + num = (val >> config->masks->xscale_sel_shift) & + config->masks->xscale_sel_mask; - eqn = (val >> config->masks->eq_sel_shift) & - config->masks->eq_sel_mask; - if (eqn == config->masks->eq1_mask) - den *= 2; + /* calculate denominator */ + den *= (val >> config->masks->yscale_sel_shift) & + config->masks->yscale_sel_mask; - /* calculate numerator */ - num = (val >> config->masks->xscale_sel_shift) & - config->masks->xscale_sel_mask; + if (!den) + return -EINVAL; - /* calculate denominator */ - den *= (val >> config->masks->yscale_sel_shift) & - config->masks->yscale_sel_mask; - val = (((clk->pclk->rate/10000) * num) / den) * 10000; - } else - val = clk->pclk->rate; + clk->rate = (((clk->pclk->rate/10000) * num) / den) * 10000; + return 0; +} - clk->rate = val; - spin_unlock_irqrestore(&clocks_lock, flags); +/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ +int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate) +{ + struct aux_rate_tbl *tbls = clk->rate_config.tbls; + struct aux_clk_config *config = clk->private_data; + unsigned long val, rate; + int i; + + i = round_rate_index(clk, desired_rate, &rate); + if (i < 0) + return i; + + val = readl(config->synth_reg) & + ~(config->masks->eq_sel_mask << config->masks->eq_sel_shift); + val |= (tbls[i].eq & config->masks->eq_sel_mask) << + config->masks->eq_sel_shift; + val &= ~(config->masks->xscale_sel_mask << + config->masks->xscale_sel_shift); + val |= (tbls[i].xscale & config->masks->xscale_sel_mask) << + config->masks->xscale_sel_shift; + val &= ~(config->masks->yscale_sel_mask << + config->masks->yscale_sel_shift); + val |= (tbls[i].yscale & config->masks->yscale_sel_mask) << + config->masks->yscale_sel_shift; + writel(val, config->synth_reg); + + clk->rate = rate; + + return 0; +} + +/* + * Calculates gpt clk rate for different values of mscale and nscale + * + * Fout= Fin/((2 ^ (N+1)) * (M+1)) + */ +unsigned long gpt_calc_rate(struct clk *clk, int index) +{ + unsigned long rate = clk->pclk->rate; + struct gpt_rate_tbl *tbls = clk->rate_config.tbls; + + return rate / ((1 << (tbls[index].nscale + 1)) * + (tbls[index].mscale + 1)); } /* @@ -401,49 +717,142 @@ void aux_clk_recalc(struct clk *clk) * Fout from synthesizer can be given from below equations: * Fout= Fin/((2 ^ (N+1)) * (M+1)) */ -void gpt_clk_recalc(struct clk *clk) +int gpt_clk_recalc(struct clk *clk) { struct gpt_clk_config *config = clk->private_data; - struct pclk_info *pclk_info = NULL; unsigned int div = 1, val; - unsigned long flags; - pclk_info = pclk_info_get(clk); - if (!pclk_info) { - spin_lock_irqsave(&clocks_lock, flags); - clk->pclk = NULL; - clk->rate = 0; - spin_unlock_irqrestore(&clocks_lock, flags); - return; - } + val = readl(config->synth_reg); + div += (val >> config->masks->mscale_sel_shift) & + config->masks->mscale_sel_mask; + div *= 1 << (((val >> config->masks->nscale_sel_shift) & + config->masks->nscale_sel_mask) + 1); - change_parent(clk, pclk_info->pclk); - - spin_lock_irqsave(&clocks_lock, flags); - if (pclk_info->scalable) { - val = readl(config->synth_reg); - div += (val >> config->masks->mscale_sel_shift) & - config->masks->mscale_sel_mask; - div *= 1 << (((val >> config->masks->nscale_sel_shift) & - config->masks->nscale_sel_mask) + 1); - } + if (!div) + return -EINVAL; clk->rate = (unsigned long)clk->pclk->rate / div; - spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} + +/* Configures new clock rate of gptiliary synthesizers used by: UART, FIRDA*/ +int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate) +{ + struct gpt_rate_tbl *tbls = clk->rate_config.tbls; + struct gpt_clk_config *config = clk->private_data; + unsigned long val, rate; + int i; + + i = round_rate_index(clk, desired_rate, &rate); + if (i < 0) + return i; + + val = readl(config->synth_reg) & ~(config->masks->mscale_sel_mask << + config->masks->mscale_sel_shift); + val |= (tbls[i].mscale & config->masks->mscale_sel_mask) << + config->masks->mscale_sel_shift; + val &= ~(config->masks->nscale_sel_mask << + config->masks->nscale_sel_shift); + val |= (tbls[i].nscale & config->masks->nscale_sel_mask) << + config->masks->nscale_sel_shift; + writel(val, config->synth_reg); + + clk->rate = rate; + + return 0; +} + +/* + * Calculates clcd clk rate for different values of div + * + * Fout from synthesizer can be given from below equation: + * Fout= Fin/2*div (division factor) + * div is 17 bits:- + * 0-13 (fractional part) + * 14-16 (integer part) + * To calculate Fout we left shift val by 14 bits and divide Fin by + * complete div (including fractional part) and then right shift the + * result by 14 places. + */ +unsigned long clcd_calc_rate(struct clk *clk, int index) +{ + unsigned long rate = clk->pclk->rate; + struct clcd_rate_tbl *tbls = clk->rate_config.tbls; + + rate /= 1000; + rate <<= 12; + rate /= (2 * tbls[index].div); + rate >>= 12; + rate *= 1000; + + return rate; +} + +/* + * calculates current programmed rate of clcd synthesizer + * Fout from synthesizer can be given from below equation: + * Fout= Fin/2*div (division factor) + * div is 17 bits:- + * 0-13 (fractional part) + * 14-16 (integer part) + * To calculate Fout we left shift val by 14 bits and divide Fin by + * complete div (including fractional part) and then right shift the + * result by 14 places. + */ +int clcd_clk_recalc(struct clk *clk) +{ + struct clcd_clk_config *config = clk->private_data; + unsigned int div = 1; + unsigned long prate; + unsigned int val; + + val = readl(config->synth_reg); + div = (val >> config->masks->div_factor_shift) & + config->masks->div_factor_mask; + + if (!div) + return -EINVAL; + + prate = clk->pclk->rate / 1000; /* first level division, make it KHz */ + + clk->rate = (((unsigned long)prate << 12) / (2 * div)) >> 12; + clk->rate *= 1000; + return 0; +} + +/* Configures new clock rate of auxiliary synthesizers used by: UART, FIRDA*/ +int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate) +{ + struct clcd_rate_tbl *tbls = clk->rate_config.tbls; + struct clcd_clk_config *config = clk->private_data; + unsigned long val, rate; + int i; + + i = round_rate_index(clk, desired_rate, &rate); + if (i < 0) + return i; + + val = readl(config->synth_reg) & ~(config->masks->div_factor_mask << + config->masks->div_factor_shift); + val |= (tbls[i].div & config->masks->div_factor_mask) << + config->masks->div_factor_shift; + writel(val, config->synth_reg); + + clk->rate = rate; + + return 0; } /* * Used for clocks that always have value as the parent clock divided by a * fixed divisor */ -void follow_parent(struct clk *clk) +int follow_parent(struct clk *clk) { - unsigned long flags; unsigned int div_factor = (clk->div_factor < 1) ? 1 : clk->div_factor; - spin_lock_irqsave(&clocks_lock, flags); clk->rate = clk->pclk->rate/div_factor; - spin_unlock_irqrestore(&clocks_lock, flags); + return 0; } /** @@ -454,5 +863,25 @@ void follow_parent(struct clk *clk) */ void recalc_root_clocks(void) { - propagate_rate(&root_clks); + struct clk *pclk; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&clocks_lock, flags); + list_for_each_entry(pclk, &root_clks, sibling) { + if (pclk->recalc) { + ret = pclk->recalc(pclk); + /* + * recalc will return error if clk out is not programmed + * In this case configure default clock. + */ + if (ret && pclk->set_rate) + pclk->set_rate(pclk, 0); + } + propagate_rate(pclk, 1); + /* Enable clks enabled on init, in software view */ + if (pclk->flags & ENABLED_ON_INIT) + do_clk_enable(pclk); + } + spin_unlock_irqrestore(&clocks_lock, flags); } diff --git a/arch/arm/plat-spear/include/plat/clock.h b/arch/arm/plat-spear/include/plat/clock.h index 863d9e98392..5a601d83097 100644 --- a/arch/arm/plat-spear/include/plat/clock.h +++ b/arch/arm/plat-spear/include/plat/clock.h @@ -21,6 +21,7 @@ /* clk structure flags */ #define ALWAYS_ENABLED (1 << 0) /* clock always enabled */ #define RESET_TO_ENABLE (1 << 1) /* reset register bit to enable clk */ +#define ENABLED_ON_INIT (1 << 2) /* clocks enabled at init */ /** * struct clkops - clock operations @@ -35,13 +36,11 @@ struct clkops { /** * struct pclk_info - parents info * @pclk: pointer to parent clk - * @pclk_mask: value to be written for selecting this parent - * @scalable: Is parent scalable (1 - YES, 0 - NO) + * @pclk_val: value to be written for selecting this parent */ struct pclk_info { struct clk *pclk; - u8 pclk_mask; - u8 scalable; + u8 pclk_val; }; /** @@ -58,6 +57,18 @@ struct pclk_sel { unsigned int pclk_sel_mask; }; +/** + * struct rate_config - clk rate configurations + * @tbls: array of device specific clk rate tables, in ascending order of rates + * @count: size of tbls array + * @default_index: default setting when originally disabled + */ +struct rate_config { + void *tbls; + u8 count; + u8 default_index; +}; + /** * struct clk - clock structure * @usage_count: num of users who enabled this clock @@ -67,7 +78,10 @@ struct pclk_sel { * @en_reg_bit: clk enable/disable bit * @ops: clk enable/disable ops - generic_clkops selected if NULL * @recalc: pointer to clock rate recalculate function - * @div_factor: division factor to parent clock. Only for recalc = follow_parent + * @set_rate: pointer to clock set rate function + * @calc_rate: pointer to clock get rate function for index + * @rate_config: rate configuration information, used by set_rate + * @div_factor: division factor to parent clock. * @pclk: current parent clk * @pclk_sel: pointer to parent selection structure * @pclk_sel_shift: register shift for selecting parent of this clock @@ -82,7 +96,10 @@ struct clk { void __iomem *en_reg; u8 en_reg_bit; const struct clkops *ops; - void (*recalc) (struct clk *); + int (*recalc) (struct clk *); + int (*set_rate) (struct clk *, unsigned long rate); + unsigned long (*calc_rate)(struct clk *, int index); + struct rate_config rate_config; unsigned int div_factor; struct clk *pclk; @@ -115,6 +132,14 @@ struct pll_clk_config { struct pll_clk_masks *masks; }; +/* pll clk rate config structure */ +struct pll_rate_tbl { + u8 mode; + u16 m; + u8 n; + u8 p; +}; + /* ahb and apb bus configuration structure */ struct bus_clk_masks { u32 mask; @@ -126,6 +151,11 @@ struct bus_clk_config { struct bus_clk_masks *masks; }; +/* ahb and apb clk bus rate config structure */ +struct bus_rate_tbl { + u8 div; +}; + /* Aux clk configuration structure: applicable to UART and FIRDA */ struct aux_clk_masks { u32 eq_sel_mask; @@ -143,6 +173,13 @@ struct aux_clk_config { struct aux_clk_masks *masks; }; +/* aux clk rate config structure */ +struct aux_rate_tbl { + u16 xscale; + u16 yscale; + u8 eq; +}; + /* GPT clk configuration structure */ struct gpt_clk_masks { u32 mscale_sel_mask; @@ -156,15 +193,48 @@ struct gpt_clk_config { struct gpt_clk_masks *masks; }; +/* gpt clk rate config structure */ +struct gpt_rate_tbl { + u16 mscale; + u16 nscale; +}; + +/* clcd clk configuration structure */ +struct clcd_synth_masks { + u32 div_factor_mask; + u32 div_factor_shift; +}; + +struct clcd_clk_config { + void __iomem *synth_reg; + struct clcd_synth_masks *masks; +}; + +/* clcd clk rate config structure */ +struct clcd_rate_tbl { + u16 div; +}; + /* platform specific clock functions */ void clk_register(struct clk_lookup *cl); void recalc_root_clocks(void); -/* clock recalc functions */ -void follow_parent(struct clk *clk); -void pll_clk_recalc(struct clk *clk); -void bus_clk_recalc(struct clk *clk); -void gpt_clk_recalc(struct clk *clk); -void aux_clk_recalc(struct clk *clk); +/* clock recalc & set rate functions */ +int follow_parent(struct clk *clk); +unsigned long pll_calc_rate(struct clk *clk, int index); +int pll_clk_recalc(struct clk *clk); +int pll_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long bus_calc_rate(struct clk *clk, int index); +int bus_clk_recalc(struct clk *clk); +int bus_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long gpt_calc_rate(struct clk *clk, int index); +int gpt_clk_recalc(struct clk *clk); +int gpt_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long aux_calc_rate(struct clk *clk, int index); +int aux_clk_recalc(struct clk *clk); +int aux_clk_set_rate(struct clk *clk, unsigned long desired_rate); +unsigned long clcd_calc_rate(struct clk *clk, int index); +int clcd_clk_recalc(struct clk *clk); +int clcd_clk_set_rate(struct clk *clk, unsigned long desired_rate); #endif /* __PLAT_CLOCK_H */