diff --git a/drivers/net/wireless/ath9k/core.h b/drivers/net/wireless/ath9k/core.h
index cb3e61e57c4..59d835b72cd 100644
--- a/drivers/net/wireless/ath9k/core.h
+++ b/drivers/net/wireless/ath9k/core.h
@@ -380,7 +380,6 @@ void ath_rx_cleanup(struct ath_softc *sc);
 int ath_rx_tasklet(struct ath_softc *sc, int flush);
 int ath_rx_input(struct ath_softc *sc,
 		 struct ath_node *node,
-		 int is_ampdu,
 		 struct sk_buff *skb,
 		 struct ath_recv_status *rx_status,
 		 enum ATH_RX_TYPE *status);
@@ -650,6 +649,9 @@ struct ath_node {
 	u8 an_smmode; /* SM Power save mode */
 	u8 an_flags;
 	u8 an_addr[ETH_ALEN];
+
+	u16 maxampdu;
+	u8 mpdudensity;
 };
 
 void ath_tx_resume_tid(struct ath_softc *sc,
@@ -919,8 +921,6 @@ enum RATE_TYPE {
 
 struct ath_ht_info {
 	enum ath9k_ht_macmode tx_chan_width;
-	u16 maxampdu;
-	u8 mpdudensity;
 	u8 ext_chan_offset;
 };
 
diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c
index 41cd114c438..7555c341338 100644
--- a/drivers/net/wireless/ath9k/main.c
+++ b/drivers/net/wireless/ath9k/main.c
@@ -330,25 +330,15 @@ static void ath9k_ht_conf(struct ath_softc *sc,
 {
 	struct ath_ht_info *ht_info = &sc->sc_ht_info;
 
-	if (bss_conf->assoc_ht) {
-		ht_info->ext_chan_offset =
-			bss_conf->ht_bss_conf->bss_cap &
-				IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+	if (sc->hw->conf.ht.enabled) {
+		ht_info->ext_chan_offset = bss_conf->ht.secondary_channel_offset;
 
-		if (!(bss_conf->ht_cap->cap &
-			IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
-			    (bss_conf->ht_bss_conf->bss_cap &
-				IEEE80211_HT_PARAM_CHAN_WIDTH_ANY))
+		if (bss_conf->ht.width_40_ok)
 			ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040;
 		else
 			ht_info->tx_chan_width = ATH9K_HT_MACMODE_20;
 
 		ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width);
-		ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
-					bss_conf->ht_cap->ampdu_factor);
-		ht_info->mpdudensity =
-			parse_mpdudensity(bss_conf->ht_cap->ampdu_density);
-
 	}
 }
 
@@ -390,7 +380,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 		sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER;
 
 		/* Update chainmask */
-		ath_update_chainmask(sc, bss_conf->assoc_ht);
+		ath_update_chainmask(sc, hw->conf.ht.enabled);
 
 		DPRINTF(sc, ATH_DBG_CONFIG,
 			"%s: bssid %pM aid 0x%x\n",
@@ -408,7 +398,7 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc,
 			return;
 		}
 
-		if (hw->conf.ht_cap.ht_supported)
+		if (hw->conf.ht.enabled)
 			sc->sc_ah->ah_channels[pos].chanmode =
 				ath_get_extchanmode(sc, curchan);
 		else
@@ -531,7 +521,6 @@ int _ath_rx_indicate(struct ath_softc *sc,
 
 	if (an) {
 		ath_rx_input(sc, an,
-			     hw->conf.ht_cap.ht_supported,
 			     skb, status, &st);
 	}
 	if (!an || (st != ATH_RX_CONSUMED))
@@ -1241,6 +1230,9 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		__func__,
 		curchan->center_freq);
 
+	/* Update chainmask */
+	ath_update_chainmask(sc, conf->ht.enabled);
+
 	pos = ath_get_channel(sc, curchan);
 	if (pos == -1) {
 		DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__);
@@ -1251,7 +1243,7 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed)
 		(curchan->band == IEEE80211_BAND_2GHZ) ?
 		CHANNEL_G : CHANNEL_A;
 
-	if (sc->sc_curaid && hw->conf.ht_cap.ht_supported)
+	if (sc->sc_curaid && hw->conf.ht.enabled)
 		sc->sc_ah->ah_channels[pos].chanmode =
 			ath_get_extchanmode(sc, curchan);
 
@@ -1434,6 +1426,14 @@ static void ath9k_sta_notify(struct ieee80211_hw *hw,
 		} else {
 			ath_node_get(sc, sta->addr);
 		}
+
+		/* XXX: Is this right? Can the capabilities change? */
+		an = ath_node_find(sc, sta->addr);
+		an->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR +
+					sta->ht_cap.ampdu_factor);
+		an->mpdudensity =
+			parse_mpdudensity(sta->ht_cap.ampdu_density);
+
 		spin_unlock_irqrestore(&sc->node_lock, flags);
 		break;
 	case STA_NOTIFY_REMOVE:
@@ -1552,9 +1552,8 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changed & BSS_CHANGED_HT) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n",
-			__func__,
-			bss_conf->assoc_ht);
+		DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT\n",
+			__func__);
 		ath9k_ht_conf(sc, bss_conf);
 	}
 
diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c
index ee2dbce42b4..9b252603096 100644
--- a/drivers/net/wireless/ath9k/rc.c
+++ b/drivers/net/wireless/ath9k/rc.c
@@ -1838,7 +1838,7 @@ void ath_rc_node_update(struct ieee80211_hw *hw, struct ath_rate_node *rc_priv)
 	struct ath_softc *sc = hw->priv;
 	u32 capflag = 0;
 
-	if (hw->conf.ht_cap.ht_supported) {
+	if (hw->conf.ht.enabled) {
 		capflag |= ATH_RC_HT_FLAG | ATH_RC_DS_FLAG;
 		if (sc->sc_ht_info.tx_chan_width == ATH9K_HT_MACMODE_2040)
 			capflag |= ATH_RC_CW40_FLAG;
@@ -1979,7 +1979,7 @@ static void ath_get_rate(void *priv, struct ieee80211_supported_band *sband,
 
 	/* Check if aggregation has to be enabled for this tid */
 
-	if (hw->conf.ht_cap.ht_supported) {
+	if (hw->conf.ht.enabled) {
 		if (ieee80211_is_data_qos(fc)) {
 			qc = ieee80211_get_qos_ctl(hdr);
 			tid = qc[0] & 0xf;
@@ -2026,9 +2026,9 @@ static void ath_rate_init(void *priv, struct ieee80211_supported_band *sband,
 	DPRINTF(sc, ATH_DBG_RATE, "%s\n", __func__);
 
 	ath_setup_rates(sc, sband, sta, ath_rc_priv);
-	if (sc->hw->conf.flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
+	if (sc->hw->conf.ht.enabled) {
 		for (i = 0; i < 77; i++) {
-			if (sc->hw->conf.ht_cap.mcs.rx_mask[i/8] & (1<<(i%8)))
+			if (sta->ht_cap.mcs.rx_mask[i/8] & (1<<(i%8)))
 				ath_rc_priv->neg_ht_rates.rs_rates[j++] = i;
 			if (j == ATH_RATE_MAX)
 				break;
diff --git a/drivers/net/wireless/ath9k/recv.c b/drivers/net/wireless/ath9k/recv.c
index 010fcdfec3f..828322840a8 100644
--- a/drivers/net/wireless/ath9k/recv.c
+++ b/drivers/net/wireless/ath9k/recv.c
@@ -720,12 +720,11 @@ void ath_flushrecv(struct ath_softc *sc)
 
 int ath_rx_input(struct ath_softc *sc,
 		 struct ath_node *an,
-		 int is_ampdu,
 		 struct sk_buff *skb,
 		 struct ath_recv_status *rx_status,
 		 enum ATH_RX_TYPE *status)
 {
-	if (is_ampdu && (sc->sc_flags & SC_OP_RXAGGR)) {
+	if (sc->sc_flags & SC_OP_RXAGGR) {
 		*status = ATH_RX_CONSUMED;
 		return ath_ampdu_input(sc, an, skb, rx_status);
 	} else {
diff --git a/drivers/net/wireless/ath9k/xmit.c b/drivers/net/wireless/ath9k/xmit.c
index 3770fbe84fc..ba818cc2fb5 100644
--- a/drivers/net/wireless/ath9k/xmit.c
+++ b/drivers/net/wireless/ath9k/xmit.c
@@ -300,7 +300,8 @@ static int ath_tx_prepare(struct ath_softc *sc,
 	if (ieee80211_is_data(fc) && !txctl->use_minrate) {
 
 		/* Enable HT only for DATA frames and not for EAPOL */
-		txctl->ht = (hw->conf.ht_cap.ht_supported &&
+		/* XXX why AMPDU only?? */
+		txctl->ht = (hw->conf.ht.enabled &&
 			    (tx_info->flags & IEEE80211_TX_CTL_AMPDU));
 
 		if (is_multicast_ether_addr(hdr->addr1)) {
@@ -1450,7 +1451,8 @@ static int ath_tx_send_ampdu(struct ath_softc *sc,
  */
 
 static u32 ath_lookup_rate(struct ath_softc *sc,
-				 struct ath_buf *bf)
+			   struct ath_buf *bf,
+			   struct ath_atx_tid *tid)
 {
 	const struct ath9k_rate_table *rt = sc->sc_currates;
 	struct sk_buff *skb;
@@ -1504,7 +1506,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc,
 	 * The IE, however can hold upto 65536, which shows up here
 	 * as zero. Ignore 65536 since we  are constrained by hw.
 	 */
-	maxampdu = sc->sc_ht_info.maxampdu;
+	maxampdu = tid->an->maxampdu;
 	if (maxampdu)
 		aggr_limit = min(aggr_limit, maxampdu);
 
@@ -1518,6 +1520,7 @@ static u32 ath_lookup_rate(struct ath_softc *sc,
  */
 
 static int ath_compute_num_delims(struct ath_softc *sc,
+				  struct ath_atx_tid *tid,
 				  struct ath_buf *bf,
 				  u16 frmlen)
 {
@@ -1545,7 +1548,7 @@ static int ath_compute_num_delims(struct ath_softc *sc,
 	 * required minimum length for subframe. Take into account
 	 * whether high rate is 20 or 40Mhz and half or full GI.
 	 */
-	mpdudensity = sc->sc_ht_info.mpdudensity;
+	mpdudensity = tid->an->mpdudensity;
 
 	/*
 	 * If there is no mpdu density restriction, no further calculation
@@ -1619,7 +1622,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		}
 
 		if (!rl) {
-			aggr_limit = ath_lookup_rate(sc, bf);
+			aggr_limit = ath_lookup_rate(sc, bf, tid);
 			rl = 1;
 			/*
 			 * Is rate dual stream
@@ -1657,7 +1660,7 @@ static enum ATH_AGGR_STATUS ath_tx_form_aggr(struct ath_softc *sc,
 		 * Get the delimiters needed to meet the MPDU
 		 * density for this node.
 		 */
-		ndelim = ath_compute_num_delims(sc, bf_first, bf->bf_frmlen);
+		ndelim = ath_compute_num_delims(sc, tid, bf_first, bf->bf_frmlen);
 
 		bpad = PADBYTES(al_delta) + (ndelim << 2);
 
@@ -2629,7 +2632,7 @@ void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an)
 		struct ath_atx_ac *ac;
 		int tidno, acno;
 
-		sc->sc_ht_info.maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
+		an->maxampdu = ATH_AMPDU_LIMIT_DEFAULT;
 
 		/*
 		 * Init per tid tx state
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index cd1bff59049..e10e0ca09ce 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -1133,8 +1133,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv,
 	s32 rate;
 	s8 is_green = lq_sta->is_green;
 
-	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
-	    !sta->ht_cap.ht_supported)
+	if (!conf->ht.enabled || !sta->ht_cap.ht_supported)
 		return -1;
 
 	if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2)
@@ -1201,8 +1200,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv,
 	u8 is_green = lq_sta->is_green;
 	s32 rate;
 
-	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) ||
-	    !sta->ht_cap.ht_supported)
+	if (!conf->ht.enabled || !sta->ht_cap.ht_supported)
 		return -1;
 
 	IWL_DEBUG_RATE("LQ: try to switch to SISO\n");
@@ -2001,9 +1999,8 @@ lq_update:
 		 * stay with best antenna legacy modulation for a while
 		 * before next round of mode comparisons. */
 		tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]);
-		if (is_legacy(tbl1->lq_type) &&
-		   (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)) &&
-		    (lq_sta->action_counter >= 1)) {
+		if (is_legacy(tbl1->lq_type) && !conf->ht.enabled &&
+		    lq_sta->action_counter >= 1) {
 			lq_sta->action_counter = 0;
 			IWL_DEBUG_RATE("LQ: STAY in legacy table\n");
 			rs_set_stay_in_table(priv, 1, lq_sta);
@@ -2238,19 +2235,19 @@ static void rs_rate_init(void *priv_r, struct ieee80211_supported_band *sband,
 	 * active_siso_rate mask includes 9 MBits (bit 5), and CCK (bits 0-3),
 	 * supp_rates[] does not; shift to convert format, force 9 MBits off.
 	 */
-	lq_sta->active_siso_rate = conf->ht_cap.mcs.rx_mask[0] << 1;
-	lq_sta->active_siso_rate |= conf->ht_cap.mcs.rx_mask[0] & 0x1;
+	lq_sta->active_siso_rate = sta->ht_cap.mcs.rx_mask[0] << 1;
+	lq_sta->active_siso_rate |= sta->ht_cap.mcs.rx_mask[0] & 0x1;
 	lq_sta->active_siso_rate &= ~((u16)0x2);
 	lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE;
 
 	/* Same here */
-	lq_sta->active_mimo2_rate = conf->ht_cap.mcs.rx_mask[1] << 1;
-	lq_sta->active_mimo2_rate |= conf->ht_cap.mcs.rx_mask[1] & 0x1;
+	lq_sta->active_mimo2_rate = sta->ht_cap.mcs.rx_mask[1] << 1;
+	lq_sta->active_mimo2_rate |= sta->ht_cap.mcs.rx_mask[1] & 0x1;
 	lq_sta->active_mimo2_rate &= ~((u16)0x2);
 	lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE;
 
-	lq_sta->active_mimo3_rate = conf->ht_cap.mcs.rx_mask[2] << 1;
-	lq_sta->active_mimo3_rate |= conf->ht_cap.mcs.rx_mask[2] & 0x1;
+	lq_sta->active_mimo3_rate = sta->ht_cap.mcs.rx_mask[2] << 1;
+	lq_sta->active_mimo3_rate |= sta->ht_cap.mcs.rx_mask[2] & 0x1;
 	lq_sta->active_mimo3_rate &= ~((u16)0x2);
 	lq_sta->active_mimo3_rate <<= IWL_FIRST_OFDM_RATE;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 79a24410dd0..7c3eb3d8f7e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -552,17 +552,30 @@ static int iwl4965_send_beacon_cmd(struct iwl_priv *priv)
 static void iwl4965_ht_conf(struct iwl_priv *priv,
 			    struct ieee80211_bss_conf *bss_conf)
 {
-	struct ieee80211_sta_ht_cap *ht_conf = bss_conf->ht_cap;
-	struct ieee80211_ht_bss_info *ht_bss_conf = bss_conf->ht_bss_conf;
+	struct ieee80211_sta_ht_cap *ht_conf;
 	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+	struct ieee80211_sta *sta;
 
 	IWL_DEBUG_MAC80211("enter: \n");
 
-	iwl_conf->is_ht = bss_conf->assoc_ht;
-
 	if (!iwl_conf->is_ht)
 		return;
 
+
+	/*
+	 * It is totally wrong to base global information on something
+	 * that is valid only when associated, alas, this driver works
+	 * that way and I don't know how to fix it.
+	 */
+
+	rcu_read_lock();
+	sta = ieee80211_find_sta(priv->hw, priv->bssid);
+	if (!sta) {
+		rcu_read_unlock();
+		return;
+	}
+	ht_conf = &sta->ht_cap;
+
 	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_20)
 		iwl_conf->sgf |= HT_SHORT_GI_20MHZ;
 	if (ht_conf->cap & IEEE80211_HT_CAP_SGI_40)
@@ -574,8 +587,8 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
 
 	iwl_conf->supported_chan_width =
 		!!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40);
-	iwl_conf->extension_chan_offset =
-		ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+
+	iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset;
 	/* If no above or below channel supplied disable FAT channel */
 	if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE &&
 	    iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) {
@@ -587,15 +600,14 @@ static void iwl4965_ht_conf(struct iwl_priv *priv,
 
 	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
 
-	iwl_conf->control_channel = ht_bss_conf->primary_channel;
-	iwl_conf->tx_chan_width =
-		!!(ht_bss_conf->bss_cap & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
+	iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok;
 	iwl_conf->ht_protection =
-		ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_PROTECTION;
+		bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
 	iwl_conf->non_GF_STA_present =
-		!!(ht_bss_conf->bss_op_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+		!!(bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
+
+	rcu_read_unlock();
 
-	IWL_DEBUG_MAC80211("control channel %d\n", iwl_conf->control_channel);
 	IWL_DEBUG_MAC80211("leave\n");
 }
 
@@ -2746,6 +2758,8 @@ static int iwl4965_mac_config(struct ieee80211_hw *hw, u32 changed)
 	mutex_lock(&priv->mutex);
 	IWL_DEBUG_MAC80211("enter to channel %d\n", conf->channel->hw_value);
 
+	priv->current_ht_config.is_ht = conf->ht.enabled;
+
 	if (conf->radio_enabled && iwl_radio_kill_sw_enable_radio(priv)) {
 		IWL_DEBUG_MAC80211("leave - RF-KILL - waiting for uCode\n");
 		goto out;
@@ -3104,7 +3118,6 @@ static void iwl4965_bss_info_changed(struct ieee80211_hw *hw,
 	}
 
 	if (changes & BSS_CHANGED_HT) {
-		IWL_DEBUG_MAC80211("HT %d\n", bss_conf->assoc_ht);
 		iwl4965_ht_conf(priv, bss_conf);
 		iwl_set_rxon_chain(priv);
 	}
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 4678da447ff..10f5a0a233f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -637,8 +637,8 @@ u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 	}
 
 	return iwl_is_channel_extension(priv, priv->band,
-					 iwl_ht_conf->control_channel,
-					 iwl_ht_conf->extension_chan_offset);
+					le16_to_cpu(priv->staging_rxon.channel),
+					iwl_ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 
@@ -663,13 +663,6 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
 				 RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
 
-	if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
-		IWL_DEBUG_ASSOC("control diff than current %d %d\n",
-				le16_to_cpu(rxon->channel),
-				ht_info->control_channel);
-		return;
-	}
-
 	/* Note: control channel is opposite of extension channel */
 	switch (ht_info->extension_chan_offset) {
 	case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
@@ -692,14 +685,12 @@ void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 
 	IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
 			"rxon flags 0x%X operation mode :0x%X "
-			"extension channel offset 0x%x "
-			"control chan %d\n",
+			"extension channel offset 0x%x\n",
 			ht_info->mcs.rx_mask[0],
 			ht_info->mcs.rx_mask[1],
 			ht_info->mcs.rx_mask[2],
 			le32_to_cpu(rxon->flags), ht_info->ht_protection,
-			ht_info->extension_chan_offset,
-			ht_info->control_channel);
+			ht_info->extension_chan_offset);
 	return;
 }
 EXPORT_SYMBOL(iwl_set_rxon_ht);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 572250ee9d5..2e951493397 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -413,7 +413,6 @@ struct iwl_ht_info {
 	u8 mpdu_density;
 	struct ieee80211_mcs_info mcs;
 	/* BSS related data */
-	u8 control_channel;
 	u8 extension_chan_offset;
 	u8 tx_chan_width;
 	u8 ht_protection;
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index b9b8554433a..218483d096c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -890,20 +890,31 @@ static void iwl_sta_init_lq(struct iwl_priv *priv, const u8 *addr, int is_ap)
  */
 int iwl_rxon_add_station(struct iwl_priv *priv, const u8 *addr, int is_ap)
 {
+	struct ieee80211_sta *sta;
+	struct ieee80211_sta_ht_cap ht_config;
+	struct ieee80211_sta_ht_cap *cur_ht_config = NULL;
 	u8 sta_id;
 
 	/* Add station to device's station table */
-	struct ieee80211_conf *conf = &priv->hw->conf;
-	struct ieee80211_sta_ht_cap *cur_ht_config = &conf->ht_cap;
 
-	if ((is_ap) &&
-	    (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) &&
-	    (priv->iw_mode == NL80211_IFTYPE_STATION))
-		sta_id = iwl_add_station_flags(priv, addr, is_ap,
-						   0, cur_ht_config);
-	else
-		sta_id = iwl_add_station_flags(priv, addr, is_ap,
-						   0, NULL);
+	/*
+	 * XXX: This check is definitely not correct, if we're an AP
+	 *	it'll always be false which is not what we want, but
+	 *	it doesn't look like iwlagn is prepared to be an HT
+	 *	AP anyway.
+	 */
+	if (priv->current_ht_config.is_ht) {
+		rcu_read_lock();
+		sta = ieee80211_find_sta(priv->hw, addr);
+		if (sta) {
+			memcpy(&ht_config, &sta->ht_cap, sizeof(ht_config));
+			cur_ht_config = &ht_config;
+		}
+		rcu_read_unlock();
+	}
+
+	sta_id = iwl_add_station_flags(priv, addr, is_ap,
+				       0, cur_ht_config);
 
 	/* Set up default rate scaling table in device's station table */
 	iwl_sta_init_lq(priv, addr, is_ap);
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 94ff3eface4..9801afb6254 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -3,7 +3,7 @@
  *
  * Copyright 2002-2005, Devicescape Software, Inc.
  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
- * Copyright 2007	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2007-2008	Johannes Berg <johannes@sipsolutions.net>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -81,22 +81,6 @@ enum ieee80211_notification_types {
 	IEEE80211_NOTIFY_RE_ASSOC,
 };
 
-/**
- * struct ieee80211_ht_bss_info - describing BSS's HT characteristics
- *
- * This structure describes most essential parameters needed
- * to describe 802.11n HT characteristics in a BSS.
- *
- * @primary_channel: channel number of primery channel
- * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width)
- * @bss_op_mode: 802.11n's BSS operation modes (e.g. HT protection)
- */
-struct ieee80211_ht_bss_info {
-	u8 primary_channel;
-	u8 bss_cap;  /* use IEEE80211_HT_IE_CHA_ */
-	u8 bss_op_mode; /* use IEEE80211_HT_IE_ */
-};
-
 /**
  * enum ieee80211_max_queues - maximum number of queues
  *
@@ -171,6 +155,19 @@ enum ieee80211_bss_change {
 	BSS_CHANGED_BASIC_RATES		= 1<<5,
 };
 
+/**
+ * struct ieee80211_bss_ht_conf - BSS's changing HT configuration
+ * @secondary_channel_offset: secondary channel offset, uses
+ *	%IEEE80211_HT_PARAM_CHA_SEC_ values
+ * @width_40_ok: indicates that 40 MHz bandwidth may be used for TX
+ * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info)
+ */
+struct ieee80211_bss_ht_conf {
+	u8 secondary_channel_offset;
+	bool width_40_ok;
+	u16 operation_mode;
+};
+
 /**
  * struct ieee80211_bss_conf - holds the BSS's changing parameters
  *
@@ -190,9 +187,7 @@ enum ieee80211_bss_change {
  * @timestamp: beacon timestamp
  * @beacon_int: beacon interval
  * @assoc_capability: capabilities taken from assoc resp
- * @assoc_ht: association in HT mode
- * @ht_cap: ht capabilities
- * @ht_bss_conf: ht extended capabilities
+ * @ht: BSS's HT configuration
  * @basic_rates: bitmap of basic rates, each bit stands for an
  *	index into the rate table configured by the driver in
  *	the current band.
@@ -210,10 +205,7 @@ struct ieee80211_bss_conf {
 	u16 assoc_capability;
 	u64 timestamp;
 	u64 basic_rates;
-	/* ht related data */
-	bool assoc_ht;
-	struct ieee80211_sta_ht_cap *ht_cap;
-	struct ieee80211_ht_bss_info *ht_bss_conf;
+	struct ieee80211_bss_ht_conf ht;
 };
 
 /**
@@ -447,13 +439,11 @@ struct ieee80211_rx_status {
  * Flags to define PHY configuration options
  *
  * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported)
- * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported)
  * @IEEE80211_CONF_PS: Enable 802.11 power save mode
  */
 enum ieee80211_conf_flags {
 	IEEE80211_CONF_RADIOTAP		= (1<<0),
-	IEEE80211_CONF_SUPPORT_HT_MODE	= (1<<1),
-	IEEE80211_CONF_PS		= (1<<2),
+	IEEE80211_CONF_PS		= (1<<1),
 };
 
 /* XXX: remove all this once drivers stop trying to use it */
@@ -463,6 +453,10 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
 }
 #define IEEE80211_CONF_SHORT_SLOT_TIME (__IEEE80211_CONF_SHORT_SLOT_TIME())
 
+struct ieee80211_ht_conf {
+	bool enabled;
+};
+
 /**
  * enum ieee80211_conf_changed - denotes which configuration changed
  *
@@ -474,6 +468,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void)
  * @IEEE80211_CONF_CHANGE_POWER: the TX power changed
  * @IEEE80211_CONF_CHANGE_CHANNEL: the channel changed
  * @IEEE80211_CONF_CHANGE_RETRY_LIMITS: retry limits changed
+ * @IEEE80211_CONF_CHANGE_HT: HT configuration changed
  */
 enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_RADIO_ENABLED	= BIT(0),
@@ -484,6 +479,7 @@ enum ieee80211_conf_changed {
 	IEEE80211_CONF_CHANGE_POWER		= BIT(5),
 	IEEE80211_CONF_CHANGE_CHANNEL		= BIT(6),
 	IEEE80211_CONF_CHANGE_RETRY_LIMITS	= BIT(7),
+	IEEE80211_CONF_CHANGE_HT		= BIT(8),
 };
 
 /**
@@ -496,9 +492,8 @@ enum ieee80211_conf_changed {
  * @listen_interval: listen interval in units of beacon interval
  * @flags: configuration flags defined above
  * @power_level: requested transmit power (in dBm)
- * @ht_cap: describes current self configuration of 802.11n HT capabilities
- * @ht_bss_conf: describes current BSS configuration of 802.11n HT parameters
  * @channel: the channel to tune to
+ * @ht: the HT configuration for the device
  * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame
  *    (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11,
  *    but actually means the number of transmissions not the number of retries
@@ -517,9 +512,7 @@ struct ieee80211_conf {
 	u8 long_frame_max_tx_count, short_frame_max_tx_count;
 
 	struct ieee80211_channel *channel;
-
-	struct ieee80211_sta_ht_cap ht_cap;
-	struct ieee80211_ht_bss_info ht_bss_conf;
+	struct ieee80211_ht_conf ht;
 };
 
 /**
@@ -715,7 +708,7 @@ enum set_key_cmd {
  * @addr: MAC address
  * @aid: AID we assigned to the station if we're an AP
  * @supp_rates: Bitmap of supported rates (per band)
- * @ht_cap: HT capabilities of this STA
+ * @ht_cap: HT capabilities of this STA; restricted to our own TX capabilities
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
  */
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 28382b5c7c2..55e3a26510e 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -582,6 +582,8 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	struct ieee80211_supported_band *sband;
 	struct ieee80211_sub_if_data *sdata = sta->sdata;
 
+	sband = local->hw.wiphy->bands[local->oper_channel->band];
+
 	/*
 	 * FIXME: updating the flags is racy when this function is
 	 *	  called from ieee80211_change_station(), this will
@@ -622,7 +624,6 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 
 	if (params->supported_rates) {
 		rates = 0;
-		sband = local->hw.wiphy->bands[local->oper_channel->band];
 
 		for (i = 0; i < params->supported_rates_len; i++) {
 			int rate = (params->supported_rates[i] & 0x7f) * 5;
@@ -635,7 +636,8 @@ static void sta_apply_parameters(struct ieee80211_local *local,
 	}
 
 	if (params->ht_capa)
-		ieee80211_ht_cap_ie_to_sta_ht_cap(params->ht_capa,
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
+						  params->ht_capa,
 						  &sta->sta.ht_cap);
 
 	if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c
index e2d121bf274..42c3e590df9 100644
--- a/net/mac80211/ht.c
+++ b/net/mac80211/ht.c
@@ -20,114 +20,38 @@
 #include "sta_info.h"
 #include "wme.h"
 
-void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie,
+void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
+				       struct ieee80211_ht_cap *ht_cap_ie,
 				       struct ieee80211_sta_ht_cap *ht_cap)
 {
+	u8 ampdu_info, tx_mcs_set_cap;
+	int i, max_tx_streams;
 
 	BUG_ON(!ht_cap);
 
 	memset(ht_cap, 0, sizeof(*ht_cap));
 
-	if (ht_cap_ie) {
-		u8 ampdu_info = ht_cap_ie->ampdu_params_info;
+	if (!ht_cap_ie)
+		return;
 
-		ht_cap->ht_supported = true;
-		ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info);
-		ht_cap->ampdu_factor =
-			ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
-		ht_cap->ampdu_density =
-			(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
-		memcpy(&ht_cap->mcs, &ht_cap_ie->mcs, sizeof(ht_cap->mcs));
-	} else
-		ht_cap->ht_supported = false;
-}
+	ht_cap->ht_supported = true;
 
-void ieee80211_ht_info_ie_to_ht_bss_info(
-			struct ieee80211_ht_info *ht_add_info_ie,
-			struct ieee80211_ht_bss_info *bss_info)
-{
-	BUG_ON(!bss_info);
+	ht_cap->cap = ht_cap->cap & sband->ht_cap.cap;
+	ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS;
+	ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
 
-	memset(bss_info, 0, sizeof(*bss_info));
-
-	if (ht_add_info_ie) {
-		u16 op_mode;
-		op_mode = le16_to_cpu(ht_add_info_ie->operation_mode);
-
-		bss_info->primary_channel = ht_add_info_ie->control_chan;
-		bss_info->bss_cap = ht_add_info_ie->ht_param;
-		bss_info->bss_op_mode = (u8)(op_mode & 0xff);
-	}
-}
-
-/*
- * ieee80211_handle_ht should be called only after the operating band
- * has been determined as ht configuration depends on the hw's
- * HT abilities for a specific band.
- */
-u32 ieee80211_handle_ht(struct ieee80211_local *local,
-			struct ieee80211_sta_ht_cap *req_ht_cap,
-			struct ieee80211_ht_bss_info *req_bss_cap)
-{
-	struct ieee80211_conf *conf = &local->hw.conf;
-	struct ieee80211_supported_band *sband;
-	struct ieee80211_sta_ht_cap ht_cap;
-	struct ieee80211_ht_bss_info ht_bss_conf;
-	u32 changed = 0;
-	int i;
-	u8 max_tx_streams;
-	u8 tx_mcs_set_cap;
-	bool enable_ht = true;
-
-	sband = local->hw.wiphy->bands[conf->channel->band];
-
-	memset(&ht_cap, 0, sizeof(ht_cap));
-	memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
-
-	/* HT is not supported */
-	if (!sband->ht_cap.ht_supported)
-		enable_ht = false;
-
-	/* disable HT */
-	if (!enable_ht) {
-		if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
-			changed |= BSS_CHANGED_HT;
-		conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
-		conf->ht_cap.ht_supported = false;
-		return changed;
-	}
-
-
-	if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
-		changed |= BSS_CHANGED_HT;
-
-	conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
-	ht_cap.ht_supported = true;
-
-	ht_cap.cap = req_ht_cap->cap & sband->ht_cap.cap;
-	ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS;
-	ht_cap.cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
-
-	ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
-	ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
-	ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
-
-	ht_cap.ampdu_factor = req_ht_cap->ampdu_factor;
-	ht_cap.ampdu_density = req_ht_cap->ampdu_density;
+	ampdu_info = ht_cap_ie->ampdu_params_info;
+	ht_cap->ampdu_factor =
+		ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
+	ht_cap->ampdu_density =
+		(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
 
 	/* own MCS TX capabilities */
 	tx_mcs_set_cap = sband->ht_cap.mcs.tx_params;
 
-	/*
-	 * configure supported Tx MCS according to requested MCS
-	 * (based in most cases on Rx capabilities of peer) and self
-	 * Tx MCS capabilities (as defined by low level driver HW
-	 * Tx capabilities)
-	 */
-
 	/* can we TX with MCS rates? */
 	if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
-		goto check_changed;
+		return;
 
 	/* Counting from 0, therefore +1 */
 	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
@@ -145,29 +69,73 @@ u32 ieee80211_handle_ht(struct ieee80211_local *local,
 	 * - remainder are multiple spatial streams using unequal modulation
 	 */
 	for (i = 0; i < max_tx_streams; i++)
-		ht_cap.mcs.rx_mask[i] =
-			sband->ht_cap.mcs.rx_mask[i] &
-					req_ht_cap->mcs.rx_mask[i];
+		ht_cap->mcs.rx_mask[i] =
+			sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
 
 	if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
 		for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
 		     i < IEEE80211_HT_MCS_MASK_LEN; i++)
-			ht_cap.mcs.rx_mask[i] =
+			ht_cap->mcs.rx_mask[i] =
 				sband->ht_cap.mcs.rx_mask[i] &
-					req_ht_cap->mcs.rx_mask[i];
+					ht_cap_ie->mcs.rx_mask[i];
 
 	/* handle MCS rate 32 too */
-	if (sband->ht_cap.mcs.rx_mask[32/8] &
-	    req_ht_cap->mcs.rx_mask[32/8] & 1)
-		ht_cap.mcs.rx_mask[32/8] |= 1;
+	if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
+		ht_cap->mcs.rx_mask[32/8] |= 1;
+}
+
+/*
+ * ieee80211_enable_ht should be called only after the operating band
+ * has been determined as ht configuration depends on the hw's
+ * HT abilities for a specific band.
+ */
+u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
+			struct ieee80211_ht_info *hti,
+			u16 ap_ht_cap_flags)
+{
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_supported_band *sband;
+	struct ieee80211_bss_ht_conf ht;
+	u32 changed = 0;
+	bool enable_ht = true, ht_changed;
+
+	sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+	memset(&ht, 0, sizeof(ht));
+
+	/* HT is not supported */
+	if (!sband->ht_cap.ht_supported)
+		enable_ht = false;
+
+	/* check that channel matches the right operating channel */
+	if (local->hw.conf.channel->center_freq !=
+	    ieee80211_channel_to_frequency(hti->control_chan))
+		enable_ht = false;
+
+	/*
+	 * XXX: This is totally incorrect when there are multiple virtual
+	 *	interfaces, needs to be fixed later.
+	 */
+	ht_changed = local->hw.conf.ht.enabled != enable_ht;
+	local->hw.conf.ht.enabled = enable_ht;
+	if (ht_changed)
+		ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
+
+	/* disable HT */
+	if (!enable_ht)
+		return 0;
+	ht.secondary_channel_offset =
+		hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
+	ht.width_40_ok =
+		!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
+		(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
+		(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY);
+	ht.operation_mode = le16_to_cpu(hti->operation_mode);
 
- check_changed:
 	/* if bss configuration changed store the new one */
-	if (memcmp(&conf->ht_cap, &ht_cap, sizeof(ht_cap)) ||
-	    memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
+	if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
 		changed |= BSS_CHANGED_HT;
-		memcpy(&conf->ht_cap, &ht_cap, sizeof(ht_cap));
-		memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
+		sdata->vif.bss_conf.ht = ht;
 	}
 
 	return changed;
@@ -900,8 +868,9 @@ void ieee80211_process_addba_request(struct ieee80211_local *local,
 	/* sanity check for incoming parameters:
 	 * check if configuration can support the BA policy
 	 * and if buffer size does not exceeds max value */
+	/* XXX: check own ht delayed BA capability?? */
 	if (((ba_policy != 1)
-		&& (!(conf->ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
+		&& (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_DELAY_BA)))
 		|| (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
 		status = WLAN_STATUS_INVALID_QOS_PARAM;
 #ifdef CONFIG_MAC80211_HT_DEBUG
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 859b5b001f2..6f8756d26a9 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -955,14 +955,12 @@ int ieee80211_monitor_start_xmit(struct sk_buff *skb, struct net_device *dev);
 int ieee80211_subif_start_xmit(struct sk_buff *skb, struct net_device *dev);
 
 /* HT */
-void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_ht_cap *ht_cap_ie,
+void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
+				       struct ieee80211_ht_cap *ht_cap_ie,
 				       struct ieee80211_sta_ht_cap *ht_cap);
-void ieee80211_ht_info_ie_to_ht_bss_info(
-			struct ieee80211_ht_info *ht_add_info_ie,
-			struct ieee80211_ht_bss_info *bss_info);
-u32 ieee80211_handle_ht(struct ieee80211_local *local,
-			struct ieee80211_sta_ht_cap *req_ht_cap,
-			struct ieee80211_ht_bss_info *req_bss_cap);
+u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
+			struct ieee80211_ht_info *hti,
+			u16 ap_ht_cap_flags);
 void ieee80211_send_bar(struct ieee80211_sub_if_data *sdata, u8 *ra, u16 tid, u16 ssn);
 
 void ieee80211_sta_stop_rx_ba_session(struct ieee80211_sub_if_data *sdata, u8 *da,
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 9c5f5c37a49..39bc9c69893 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -700,14 +700,15 @@ static void ieee80211_sta_send_associnfo(struct ieee80211_sub_if_data *sdata,
 
 
 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
-				     struct ieee80211_if_sta *ifsta)
+				     struct ieee80211_if_sta *ifsta,
+				     u32 bss_info_changed)
 {
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_conf *conf = &local_to_hw(local)->conf;
-	u32 changed = BSS_CHANGED_ASSOC;
 
 	struct ieee80211_bss *bss;
 
+	bss_info_changed |= BSS_CHANGED_ASSOC;
 	ifsta->flags |= IEEE80211_STA_ASSOCIATED;
 
 	if (sdata->vif.type != NL80211_IFTYPE_STATION)
@@ -722,19 +723,12 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 		sdata->vif.bss_conf.timestamp = bss->timestamp;
 		sdata->vif.bss_conf.dtim_period = bss->dtim_period;
 
-		changed |= ieee80211_handle_bss_capability(sdata,
+		bss_info_changed |= ieee80211_handle_bss_capability(sdata,
 			bss->capability, bss->has_erp_value, bss->erp_value);
 
 		ieee80211_rx_bss_put(local, bss);
 	}
 
-	if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
-		changed |= BSS_CHANGED_HT;
-		sdata->vif.bss_conf.assoc_ht = 1;
-		sdata->vif.bss_conf.ht_cap = &conf->ht_cap;
-		sdata->vif.bss_conf.ht_bss_conf = &conf->ht_bss_conf;
-	}
-
 	ifsta->flags |= IEEE80211_STA_PREV_BSSID_SET;
 	memcpy(ifsta->prev_bssid, sdata->u.sta.bssid, ETH_ALEN);
 	ieee80211_sta_send_associnfo(sdata, ifsta);
@@ -748,8 +742,8 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
 	 * when we have associated, we aren't checking whether it actually
 	 * changed or not.
 	 */
-	changed |= BSS_CHANGED_BASIC_RATES;
-	ieee80211_bss_info_change_notify(sdata, changed);
+	bss_info_changed |= BSS_CHANGED_BASIC_RATES;
+	ieee80211_bss_info_change_notify(sdata, bss_info_changed);
 
 	netif_tx_start_all_queues(sdata->dev);
 	netif_carrier_on(sdata->dev);
@@ -813,7 +807,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 {
 	struct ieee80211_local *local = sdata->local;
 	struct sta_info *sta;
-	u32 changed = BSS_CHANGED_ASSOC;
+	u32 changed = 0;
 
 	rcu_read_lock();
 
@@ -847,15 +841,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	ifsta->flags &= ~IEEE80211_STA_ASSOCIATED;
 	changed |= ieee80211_reset_erp_info(sdata);
 
-	if (sdata->vif.bss_conf.assoc_ht)
-		changed |= BSS_CHANGED_HT;
-
-	sdata->vif.bss_conf.assoc_ht = 0;
-	sdata->vif.bss_conf.ht_cap = NULL;
-	sdata->vif.bss_conf.ht_bss_conf = NULL;
-
 	ieee80211_led_assoc(local, 0);
-	sdata->vif.bss_conf.assoc = 0;
+	changed |= BSS_CHANGED_ASSOC;
+	sdata->vif.bss_conf.assoc = false;
 
 	ieee80211_sta_send_apinfo(sdata, ifsta);
 
@@ -867,6 +855,11 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
 	rcu_read_unlock();
 
 	sta_info_destroy(sta);
+
+	local->hw.conf.ht.enabled = false;
+	ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT);
+
+	ieee80211_bss_info_change_notify(sdata, changed);
 }
 
 static int ieee80211_sta_wep_configured(struct ieee80211_sub_if_data *sdata)
@@ -1184,8 +1177,10 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	struct ieee802_11_elems elems;
 	struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
 	u8 *pos;
+	u32 changed = 0;
 	int i, j;
 	bool have_higher_than_11mbit = false;
+	u16 ap_ht_cap_flags;
 
 	/* AssocResp and ReassocResp have identical structure, so process both
 	 * of them in this function. */
@@ -1333,15 +1328,11 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	else
 		sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
 
-	if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
-	    (ifsta->flags & IEEE80211_STA_WMM_ENABLED)) {
-		struct ieee80211_ht_bss_info bss_info;
-		ieee80211_ht_cap_ie_to_sta_ht_cap(
+	if (elems.ht_cap_elem)
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
 				elems.ht_cap_elem, &sta->sta.ht_cap);
-		ieee80211_ht_info_ie_to_ht_bss_info(
-				elems.ht_info_elem, &bss_info);
-		ieee80211_handle_ht(local, &sta->sta.ht_cap, &bss_info);
-	}
+
+	ap_ht_cap_flags = sta->sta.ht_cap.cap;
 
 	rate_control_rate_init(sta);
 
@@ -1353,11 +1344,16 @@ static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
 	} else
 		rcu_read_unlock();
 
+	if (elems.ht_info_elem && elems.wmm_param &&
+	    (ifsta->flags & IEEE80211_STA_WMM_ENABLED))
+		changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
+					       ap_ht_cap_flags);
+
 	/* set AID and assoc capability,
 	 * ieee80211_set_associated() will tell the driver */
 	bss_conf->aid = aid;
 	bss_conf->assoc_capability = capab_info;
-	ieee80211_set_associated(sdata, ifsta);
+	ieee80211_set_associated(sdata, ifsta, changed);
 
 	ieee80211_associated(sdata, ifsta);
 }
@@ -1657,7 +1653,6 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 	size_t baselen;
 	struct ieee802_11_elems elems;
 	struct ieee80211_local *local = sdata->local;
-	struct ieee80211_conf *conf = &local->hw.conf;
 	u32 changed = 0;
 	bool erp_valid;
 	u8 erp_value = 0;
@@ -1693,14 +1688,31 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
 			le16_to_cpu(mgmt->u.beacon.capab_info),
 			erp_valid, erp_value);
 
-	if (elems.ht_cap_elem && elems.ht_info_elem &&
-	    elems.wmm_param && conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE) {
-		struct ieee80211_ht_bss_info bss_info;
 
-		ieee80211_ht_info_ie_to_ht_bss_info(
-				elems.ht_info_elem, &bss_info);
-		changed |= ieee80211_handle_ht(local, &conf->ht_cap,
-					       &bss_info);
+	if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param) {
+		struct sta_info *sta;
+		struct ieee80211_supported_band *sband;
+		u16 ap_ht_cap_flags;
+
+		rcu_read_lock();
+
+		sta = sta_info_get(local, ifsta->bssid);
+		if (!sta) {
+			rcu_read_unlock();
+			return;
+		}
+
+		sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
+
+		ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
+				elems.ht_cap_elem, &sta->sta.ht_cap);
+
+		ap_ht_cap_flags = sta->sta.ht_cap.cap;
+
+		rcu_read_unlock();
+
+		changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
+					       ap_ht_cap_flags);
 	}
 
 	ieee80211_bss_info_change_notify(sdata, changed);