dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

hwmon: (lm90) Add support for GMT G781 

GMT G781 is a ADM1032-compatible temperature sensor chip.
Add support to the LM90 driver.

Cc: Mike Gorchak <lestat@i.com.ua>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
This commit is contained in:
Guenter Roeck 2012-03-23 10:02:18 +01:00 committed by Jean Delvare
parent f36ffeab0a
commit ae544f64cc
3 changed files with 24 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/hwmon/lm90
View File

@ -118,6 +118,10 @@ Supported chips:
Addresses scanned: I2C 0x48 through 0x4F
Datasheet: Publicly available at NXP website
http://ics.nxp.com/products/interface/datasheet/sa56004x.pdf
* GMT G781
Prefix: 'g781'
Addresses scanned: I2C 0x4c, 0x4d
Datasheet: Not publicly available from GMT
Author: Jean Delvare <khali@linux-fr.org>

3
drivers/hwmon/Kconfig
View File

@ -648,7 +648,8 @@ config SENSORS_LM90
LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, and GMT G781
sensor chips.
This driver can also be built as a module. If so, the module
will be called lm90.

19
drivers/hwmon/lm90.c
View File

@ -57,6 +57,9 @@
* This driver also supports the SA56004 from Philips. This device is
* pin-compatible with the LM86, the ED/EDP parts are also address-compatible.
*
* This driver also supports the G781 from GMT. This device is compatible
* with the ADM1032.
*
* Since the LM90 was the first chipset supported by this driver, most
* comments will refer to this chipset, but are actually general and
* concern all supported chipsets, unless mentioned otherwise.
@ -107,7 +110,7 @@ static const unsigned short normal_i2c[] = {
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
max6646, w83l771, max6696, sa56004 };
max6646, w83l771, max6696, sa56004, g781 };
/*
* The LM90 registers
@ -184,6 +187,7 @@ static const struct i2c_device_id lm90_id[] = {
{ "adm1032", adm1032 },
{ "adt7461", adt7461 },
{ "adt7461a", adt7461 },
{ "g781", g781 },
{ "lm90", lm90 },
{ "lm86", lm86 },
{ "lm89", lm86 },
@ -229,6 +233,12 @@ static const struct lm90_params lm90_params[] = {
.alert_alarms = 0x7c,
.max_convrate = 10,
},
[g781] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT
| LM90_HAVE_BROKEN_ALERT,
.alert_alarms = 0x7c,
.max_convrate = 8,
},
[lm86] = {
.flags = LM90_HAVE_OFFSET | LM90_HAVE_REM_LIMIT_EXT,
.alert_alarms = 0x7b,
@ -1289,6 +1299,13 @@ static int lm90_detect(struct i2c_client *client,
&& convrate <= 0x09) {
name = "sa56004";
}
} else
if ((address == 0x4C || address == 0x4D)
&& man_id == 0x47) { /* GMT */
if (chip_id == 0x01 /* G781 */
&& (config1 & 0x3F) == 0x00
&& convrate <= 0x08)
name = "g781";
}
if (!name) { /* identification failed */