mfd: Add an AS3711 PMIC MFD driver
AS3711 is a PMIC with multiple DCDC and LDO power supplies, GPIOs, an RTC, a battery charger and a general purpose ADC. This patch adds support for the MFD with support for a regulator driver and a backlight driver. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This commit is contained in:
Guennadi Liakhovetski
Samuel Ortiz
parent
cb5faba951
commit
acad189b08
|
|
@ -1103,6 +1103,15 @@ config MFD_RETU
|
|||
Retu is a multi-function device found on Nokia Internet Tablets
|
||||
(770, N800 and N810).
|
||||
|
||||
config MFD_AS3711
|
||||
bool "Support for AS3711"
|
||||
select MFD_CORE
|
||||
select REGMAP_I2C
|
||||
select REGMAP_IRQ
|
||||
depends on I2C=y
|
||||
help
|
||||
Support for the AS3711 PMIC from AMS
|
||||
|
||||
endmenu
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -146,3 +146,4 @@ obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
|
|||
obj-$(CONFIG_MFD_SYSCON) += syscon.o
|
||||
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
|
||||
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
|
||||
obj-$(CONFIG_MFD_AS3711) += as3711.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,217 @@
|
|||
/*
|
||||
* AS3711 PMIC MFC driver
|
||||
*
|
||||
* Copyright (C) 2012 Renesas Electronics Corporation
|
||||
* Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License as
|
||||
* published by the Free Software Foundation
|
||||
*/
|
||||
|
||||
#include <linux/device.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/mfd/as3711.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
enum {
|
||||
AS3711_REGULATOR,
|
||||
AS3711_BACKLIGHT,
|
||||
};
|
||||
|
||||
/*
|
||||
* Ok to have it static: it is only used during probing and multiple I2C devices
|
||||
* cannot be probed simultaneously. Just make sure to avoid stale data.
|
||||
*/
|
||||
static struct mfd_cell as3711_subdevs[] = {
|
||||
[AS3711_REGULATOR] = {.name = "as3711-regulator",},
|
||||
[AS3711_BACKLIGHT] = {.name = "as3711-backlight",},
|
||||
};
|
||||
|
||||
static bool as3711_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case AS3711_GPIO_SIGNAL_IN:
|
||||
case AS3711_INTERRUPT_STATUS_1:
|
||||
case AS3711_INTERRUPT_STATUS_2:
|
||||
case AS3711_INTERRUPT_STATUS_3:
|
||||
case AS3711_CHARGER_STATUS_1:
|
||||
case AS3711_CHARGER_STATUS_2:
|
||||
case AS3711_REG_STATUS:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static bool as3711_precious_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case AS3711_INTERRUPT_STATUS_1:
|
||||
case AS3711_INTERRUPT_STATUS_2:
|
||||
case AS3711_INTERRUPT_STATUS_3:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static bool as3711_readable_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
case AS3711_SD_1_VOLTAGE:
|
||||
case AS3711_SD_2_VOLTAGE:
|
||||
case AS3711_SD_3_VOLTAGE:
|
||||
case AS3711_SD_4_VOLTAGE:
|
||||
case AS3711_LDO_1_VOLTAGE:
|
||||
case AS3711_LDO_2_VOLTAGE:
|
||||
case AS3711_LDO_3_VOLTAGE:
|
||||
case AS3711_LDO_4_VOLTAGE:
|
||||
case AS3711_LDO_5_VOLTAGE:
|
||||
case AS3711_LDO_6_VOLTAGE:
|
||||
case AS3711_LDO_7_VOLTAGE:
|
||||
case AS3711_LDO_8_VOLTAGE:
|
||||
case AS3711_SD_CONTROL:
|
||||
case AS3711_GPIO_SIGNAL_OUT:
|
||||
case AS3711_GPIO_SIGNAL_IN:
|
||||
case AS3711_SD_CONTROL_1:
|
||||
case AS3711_SD_CONTROL_2:
|
||||
case AS3711_CURR_CONTROL:
|
||||
case AS3711_CURR1_VALUE:
|
||||
case AS3711_CURR2_VALUE:
|
||||
case AS3711_CURR3_VALUE:
|
||||
case AS3711_STEPUP_CONTROL_1:
|
||||
case AS3711_STEPUP_CONTROL_2:
|
||||
case AS3711_STEPUP_CONTROL_4:
|
||||
case AS3711_STEPUP_CONTROL_5:
|
||||
case AS3711_REG_STATUS:
|
||||
case AS3711_INTERRUPT_STATUS_1:
|
||||
case AS3711_INTERRUPT_STATUS_2:
|
||||
case AS3711_INTERRUPT_STATUS_3:
|
||||
case AS3711_CHARGER_STATUS_1:
|
||||
case AS3711_CHARGER_STATUS_2:
|
||||
case AS3711_ASIC_ID_1:
|
||||
case AS3711_ASIC_ID_2:
|
||||
return true;
|
||||
}
|
||||
return false;
|
||||
}
|
||||
|
||||
static const struct regmap_config as3711_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
.volatile_reg = as3711_volatile_reg,
|
||||
.readable_reg = as3711_readable_reg,
|
||||
.precious_reg = as3711_precious_reg,
|
||||
.max_register = AS3711_MAX_REGS,
|
||||
.num_reg_defaults_raw = AS3711_MAX_REGS,
|
||||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static int as3711_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct as3711 *as3711;
|
||||
struct as3711_platform_data *pdata = client->dev.platform_data;
|
||||
unsigned int id1, id2;
|
||||
int ret;
|
||||
|
||||
if (!pdata)
|
||||
dev_dbg(&client->dev, "Platform data not found\n");
|
||||
|
||||
as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
|
||||
if (!as3711) {
|
||||
dev_err(&client->dev, "Memory allocation failed\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
as3711->dev = &client->dev;
|
||||
i2c_set_clientdata(client, as3711);
|
||||
|
||||
if (client->irq)
|
||||
dev_notice(&client->dev, "IRQ not supported yet\n");
|
||||
|
||||
as3711->regmap = devm_regmap_init_i2c(client, &as3711_regmap_config);
|
||||
if (IS_ERR(as3711->regmap)) {
|
||||
ret = PTR_ERR(as3711->regmap);
|
||||
dev_err(&client->dev, "regmap initialization failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_1, &id1);
|
||||
if (!ret)
|
||||
ret = regmap_read(as3711->regmap, AS3711_ASIC_ID_2, &id2);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "regmap_read() failed: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
if (id1 != 0x8b)
|
||||
return -ENODEV;
|
||||
dev_info(as3711->dev, "AS3711 detected: %x:%x\n", id1, id2);
|
||||
|
||||
/* We can reuse as3711_subdevs[], it will be copied in mfd_add_devices() */
|
||||
if (pdata) {
|
||||
as3711_subdevs[AS3711_REGULATOR].platform_data = &pdata->regulator;
|
||||
as3711_subdevs[AS3711_REGULATOR].pdata_size = sizeof(pdata->regulator);
|
||||
as3711_subdevs[AS3711_BACKLIGHT].platform_data = &pdata->backlight;
|
||||
as3711_subdevs[AS3711_BACKLIGHT].pdata_size = sizeof(pdata->backlight);
|
||||
} else {
|
||||
as3711_subdevs[AS3711_REGULATOR].platform_data = NULL;
|
||||
as3711_subdevs[AS3711_REGULATOR].pdata_size = 0;
|
||||
as3711_subdevs[AS3711_BACKLIGHT].platform_data = NULL;
|
||||
as3711_subdevs[AS3711_BACKLIGHT].pdata_size = 0;
|
||||
}
|
||||
|
||||
ret = mfd_add_devices(as3711->dev, -1, as3711_subdevs,
|
||||
ARRAY_SIZE(as3711_subdevs), NULL, 0, NULL);
|
||||
if (ret < 0)
|
||||
dev_err(&client->dev, "add mfd devices failed: %d\n", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int as3711_i2c_remove(struct i2c_client *client)
|
||||
{
|
||||
struct as3711 *as3711 = i2c_get_clientdata(client);
|
||||
|
||||
mfd_remove_devices(as3711->dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id as3711_i2c_id[] = {
|
||||
{.name = "as3711", .driver_data = 0},
|
||||
{}
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(i2c, as3711_i2c_id);
|
||||
|
||||
static struct i2c_driver as3711_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "as3711",
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
.probe = as3711_i2c_probe,
|
||||
.remove = as3711_i2c_remove,
|
||||
.id_table = as3711_i2c_id,
|
||||
};
|
||||
|
||||
static int __init as3711_i2c_init(void)
|
||||
{
|
||||
return i2c_add_driver(&as3711_i2c_driver);
|
||||
}
|
||||
/* Initialise early */
|
||||
subsys_initcall(as3711_i2c_init);
|
||||
|
||||
static void __exit as3711_i2c_exit(void)
|
||||
{
|
||||
i2c_del_driver(&as3711_i2c_driver);
|
||||
}
|
||||
module_exit(as3711_i2c_exit);
|
||||
|
||||
MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
|
||||
MODULE_DESCRIPTION("AS3711 PMIC driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,126 @@
|
|||
/*
|
||||
* AS3711 PMIC MFC driver header
|
||||
*
|
||||
* Copyright (C) 2012 Renesas Electronics Corporation
|
||||
* Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the version 2 of the GNU General Public License as
|
||||
* published by the Free Software Foundation
|
||||
*/
|
||||
|
||||
#ifndef MFD_AS3711_H
|
||||
#define MFD_AS3711_H
|
||||
|
||||
/*
|
||||
* Client data
|
||||
*/
|
||||
|
||||
/* Register addresses */
|
||||
#define AS3711_SD_1_VOLTAGE 0 /* Digital Step-Down */
|
||||
#define AS3711_SD_2_VOLTAGE 1
|
||||
#define AS3711_SD_3_VOLTAGE 2
|
||||
#define AS3711_SD_4_VOLTAGE 3
|
||||
#define AS3711_LDO_1_VOLTAGE 4 /* Analog LDO */
|
||||
#define AS3711_LDO_2_VOLTAGE 5
|
||||
#define AS3711_LDO_3_VOLTAGE 6 /* Digital LDO */
|
||||
#define AS3711_LDO_4_VOLTAGE 7
|
||||
#define AS3711_LDO_5_VOLTAGE 8
|
||||
#define AS3711_LDO_6_VOLTAGE 9
|
||||
#define AS3711_LDO_7_VOLTAGE 0xa
|
||||
#define AS3711_LDO_8_VOLTAGE 0xb
|
||||
#define AS3711_SD_CONTROL 0x10
|
||||
#define AS3711_GPIO_SIGNAL_OUT 0x20
|
||||
#define AS3711_GPIO_SIGNAL_IN 0x21
|
||||
#define AS3711_SD_CONTROL_1 0x30
|
||||
#define AS3711_SD_CONTROL_2 0x31
|
||||
#define AS3711_CURR_CONTROL 0x40
|
||||
#define AS3711_CURR1_VALUE 0x43
|
||||
#define AS3711_CURR2_VALUE 0x44
|
||||
#define AS3711_CURR3_VALUE 0x45
|
||||
#define AS3711_STEPUP_CONTROL_1 0x50
|
||||
#define AS3711_STEPUP_CONTROL_2 0x51
|
||||
#define AS3711_STEPUP_CONTROL_4 0x53
|
||||
#define AS3711_STEPUP_CONTROL_5 0x54
|
||||
#define AS3711_REG_STATUS 0x73
|
||||
#define AS3711_INTERRUPT_STATUS_1 0x77
|
||||
#define AS3711_INTERRUPT_STATUS_2 0x78
|
||||
#define AS3711_INTERRUPT_STATUS_3 0x79
|
||||
#define AS3711_CHARGER_STATUS_1 0x86
|
||||
#define AS3711_CHARGER_STATUS_2 0x87
|
||||
#define AS3711_ASIC_ID_1 0x90
|
||||
#define AS3711_ASIC_ID_2 0x91
|
||||
|
||||
#define AS3711_MAX_REGS 0x92
|
||||
|
||||
/* Regulators */
|
||||
enum {
|
||||
AS3711_REGULATOR_SD_1,
|
||||
AS3711_REGULATOR_SD_2,
|
||||
AS3711_REGULATOR_SD_3,
|
||||
AS3711_REGULATOR_SD_4,
|
||||
AS3711_REGULATOR_LDO_1,
|
||||
AS3711_REGULATOR_LDO_2,
|
||||
AS3711_REGULATOR_LDO_3,
|
||||
AS3711_REGULATOR_LDO_4,
|
||||
AS3711_REGULATOR_LDO_5,
|
||||
AS3711_REGULATOR_LDO_6,
|
||||
AS3711_REGULATOR_LDO_7,
|
||||
AS3711_REGULATOR_LDO_8,
|
||||
|
||||
AS3711_REGULATOR_MAX,
|
||||
};
|
||||
|
||||
struct device;
|
||||
struct regmap;
|
||||
|
||||
struct as3711 {
|
||||
struct device *dev;
|
||||
struct regmap *regmap;
|
||||
};
|
||||
|
||||
#define AS3711_MAX_STEPDOWN 4
|
||||
#define AS3711_MAX_STEPUP 2
|
||||
#define AS3711_MAX_LDO 8
|
||||
|
||||
enum as3711_su2_feedback {
|
||||
AS3711_SU2_VOLTAGE,
|
||||
AS3711_SU2_CURR1,
|
||||
AS3711_SU2_CURR2,
|
||||
AS3711_SU2_CURR3,
|
||||
AS3711_SU2_CURR_AUTO,
|
||||
};
|
||||
|
||||
enum as3711_su2_fbprot {
|
||||
AS3711_SU2_LX_SD4,
|
||||
AS3711_SU2_GPIO2,
|
||||
AS3711_SU2_GPIO3,
|
||||
AS3711_SU2_GPIO4,
|
||||
};
|
||||
|
||||
/*
|
||||
* Platform data
|
||||
*/
|
||||
|
||||
struct as3711_regulator_pdata {
|
||||
struct regulator_init_data *init_data[AS3711_REGULATOR_MAX];
|
||||
};
|
||||
|
||||
struct as3711_bl_pdata {
|
||||
const char *su1_fb;
|
||||
int su1_max_uA;
|
||||
const char *su2_fb;
|
||||
int su2_max_uA;
|
||||
enum as3711_su2_feedback su2_feedback;
|
||||
enum as3711_su2_fbprot su2_fbprot;
|
||||
bool su2_auto_curr1;
|
||||
bool su2_auto_curr2;
|
||||
bool su2_auto_curr3;
|
||||
};
|
||||
|
||||
struct as3711_platform_data {
|
||||
struct as3711_regulator_pdata regulator;
|
||||
struct as3711_bl_pdata backlight;
|
||||
};
|
||||
|
||||
#endif
|
||||
Reference in New Issue