dect
/
linux-2.6
Archived
13
0
Fork 0

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

Conflicts:
	MAINTAINERS
	drivers/net/wireless/iwlwifi/pcie/trans.c
This commit is contained in:
John W. Linville 2012-06-12 14:09:59 -04:00
commit a59f975a78
13 changed files with 69 additions and 31 deletions

View File

@ -1800,6 +1800,9 @@ F: include/linux/cfag12864b.h
CFG80211 and NL80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/net/cfg80211.h
@ -4340,7 +4343,8 @@ MAC80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
@ -4351,7 +4355,8 @@ M: Stefano Brivio <stefano.brivio@polimi.it>
M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: net/mac80211/rc80211_pid*
@ -5695,6 +5700,9 @@ F: include/linux/remoteproc.h
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
F: net/rfkill/

View File

@ -232,17 +232,19 @@ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
struct pci_dev *pdev = pc->core->bus->host_pci;
struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
pdev = pc->core->bus->host_pci;
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;

View File

@ -877,6 +877,10 @@ struct b43_wl {
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
/* Set this if we call ieee80211_register_hw() and check if we call
* ieee80211_unregister_hw(). */
bool hw_registred;
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/

View File

@ -2437,6 +2437,7 @@ start_ieee80211:
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
wl->hw_registred = true;
b43_leds_register(wl->current_dev);
goto out;
@ -5299,6 +5300,7 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
wl->mac80211_initially_registered_queues = hw->queues;
wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
@ -5370,12 +5372,15 @@ static void b43_bcma_remove(struct bcma_device *core)
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
B43_WARN_ON(!wl);
if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_one_core_detach(wldev->dev);
@ -5446,7 +5451,7 @@ static void b43_ssb_remove(struct ssb_device *sdev)
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
if (wl->current_dev == wldev) {
if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */

View File

@ -1903,14 +1903,6 @@ static void ipw2100_down(struct ipw2100_priv *priv)
netif_stop_queue(priv->net_dev);
}
/* Called by register_netdev() */
static int ipw2100_net_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
return ipw2100_up(priv, 1);
}
static int ipw2100_wdev_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
@ -6087,7 +6079,6 @@ static const struct net_device_ops ipw2100_netdev_ops = {
.ndo_stop = ipw2100_close,
.ndo_start_xmit = libipw_xmit,
.ndo_change_mtu = libipw_change_mtu,
.ndo_init = ipw2100_net_init,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
.ndo_validate_addr = eth_validate_addr,
@ -6329,6 +6320,10 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
printk(KERN_INFO DRV_NAME
": Detected Intel PRO/Wireless 2100 Network Connection\n");
err = ipw2100_up(priv, 1);
if (err)
goto fail;
err = ipw2100_wdev_init(dev);
if (err)
goto fail;
@ -6338,12 +6333,7 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
* network device we would call ipw2100_up. This introduced a race
* condition with newer hotplug configurations (network was coming
* up and making calls before the device was initialized).
*
* If we called ipw2100_up before we registered the device, then the
* device name wasn't registered. So, we instead use the net_dev->init
* member to call a function that then just turns and calls ipw2100_up.
* net_dev->init is called after name allocation but before the
* notifier chain is called */
*/
err = register_netdev(dev);
if (err) {
printk(KERN_WARNING DRV_NAME

View File

@ -1251,7 +1251,7 @@ int iwl_remove_dynamic_key(struct iwl_priv *priv,
key_flags |= STA_KEY_MULTICAST_MSK;
sta_cmd.key.key_flags = key_flags;
sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
sta_cmd.key.key_offset = keyconf->hw_key_idx;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;

View File

@ -224,6 +224,7 @@
#define SCD_TXFACT (SCD_BASE + 0x10)
#define SCD_ACTIVE (SCD_BASE + 0x14)
#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
#define SCD_AGGR_SEL (SCD_BASE + 0x248)
#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)

View File

@ -35,17 +35,20 @@
#define IWL6000_UCODE_API_MAX 6
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 6
#define IWL6035_UCODE_API_MAX 6
/* Oldest version we won't warn about */
#define IWL6000_UCODE_API_OK 4
#define IWL6000G2_UCODE_API_OK 5
#define IWL6050_UCODE_API_OK 5
#define IWL6000G2B_UCODE_API_OK 6
#define IWL6035_UCODE_API_OK 6
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000G2_UCODE_API_MIN 4
#define IWL6000G2_UCODE_API_MIN 5
#define IWL6035_UCODE_API_MIN 6
/* EEPROM versions */
#define EEPROM_6000_TX_POWER_VERSION (4)
@ -243,9 +246,25 @@ const struct iwl_cfg iwl6030_2bg_cfg = {
IWL_DEVICE_6030,
};
#define IWL_DEVICE_6035 \
.fw_name_pre = IWL6030_FW_PRE, \
.ucode_api_max = IWL6035_UCODE_API_MAX, \
.ucode_api_ok = IWL6035_UCODE_API_OK, \
.ucode_api_min = IWL6035_UCODE_API_MIN, \
.device_family = IWL_DEVICE_FAMILY_6030, \
.max_inst_size = IWL60_RTC_INST_SIZE, \
.max_data_size = IWL60_RTC_DATA_SIZE, \
.eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
.eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
.base_params = &iwl6000_g2_base_params, \
.bt_params = &iwl6000_bt_params, \
.need_temp_offset_calib = true, \
.led_mode = IWL_LED_RF_STATE, \
.adv_pm = true
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
IWL_DEVICE_6030,
IWL_DEVICE_6035,
.ht_params = &iwl6000_ht_params,
};

View File

@ -1054,6 +1054,11 @@ static void iwl_tx_start(struct iwl_trans *trans)
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
/* The chain extension of the SCD doesn't work well. This feature is
* enabled by default by the HW, so we need to disable it manually.
*/
iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
int fifo = trans_pcie->setup_q_to_fifo[i];

View File

@ -1555,6 +1555,7 @@ static int hwsim_tx_info_frame_received_nl(struct sk_buff *skb_2,
hdr = (struct ieee80211_hdr *) skb->data;
mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
}
txi->flags |= IEEE80211_TX_STAT_ACK;
}
ieee80211_tx_status_irqsafe(data2->hw, skb);
return 0;

View File

@ -117,7 +117,7 @@ static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
radio_on = true;
} else if (radio_on) {
radio_on = false;
cancel_delayed_work_sync(&priv->led_on);
cancel_delayed_work(&priv->led_on);
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
}
} else if (radio_on) {

View File

@ -3100,7 +3100,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
}
local->oper_channel = cbss->channel;
ieee80211_hw_config(local, 0);
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!have_sta) {
u32 rates = 0, basic_rates = 0;

View File

@ -292,6 +292,9 @@ static int llcp_sock_getname(struct socket *sock, struct sockaddr *addr,
pr_debug("%p\n", sk);
if (llcp_sock == NULL)
return -EBADFD;
addr->sa_family = AF_NFC;
*len = sizeof(struct sockaddr_nfc_llcp);