diff --git a/CREDITS b/CREDITS index a7ea8e34383..d78359f5f64 100644 --- a/CREDITS +++ b/CREDITS @@ -518,6 +518,14 @@ N: Zach Brown E: zab@zabbo.net D: maestro pci sound +M: David Brownell +D: Kernel engineer, mentor, and friend. Maintained USB EHCI and +D: gadget layers, SPI subsystem, GPIO subsystem, and more than a few +D: device drivers. His encouragement also helped many engineers get +D: started working on the Linux kernel. David passed away in early +D: 2011, and will be greatly missed. +W: https://lkml.org/lkml/2011/4/5/36 + N: Gary Brubaker E: xavyer@ix.netcom.com D: USB Serial Empeg Empeg-car Mark I/II Driver diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 new file mode 100644 index 00000000000..aa11dbdd794 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 @@ -0,0 +1,56 @@ +What: /sys/class/backlight//_max +What: /sys/class/backlight//l1_daylight_max +What: /sys/class/backlight//l2_bright_max +What: /sys/class/backlight//l3_office_max +What: /sys/class/backlight//l4_indoor_max +What: /sys/class/backlight//l5_dark_max +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the maximum brightness for + on this . Values are between 0 and 127. This file + will also show the brightness level stored for this + . + +What: /sys/class/backlight//_dim +What: /sys/class/backlight//l2_bright_dim +What: /sys/class/backlight//l3_office_dim +What: /sys/class/backlight//l4_indoor_dim +What: /sys/class/backlight//l5_dark_dim +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Control the dim brightness for + on this . Values are between 0 and 127, typically + set to 0. Full off when the backlight is disabled. + This file will also show the dim brightness level stored for + this . + +What: /sys/class/backlight//ambient_light_level +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Get conversion value of the light sensor. + This value is updated every 80 ms (when the light sensor + is enabled). Returns integer between 0 (dark) and + 8000 (max ambient brightness) + +What: /sys/class/backlight//ambient_light_zone +Date: Mai 2011 +KernelVersion: 2.6.40 +Contact: device-drivers-devel@blackfin.uclinux.org +Description: + Get/Set current ambient light zone. Reading returns + integer between 1..5 (1 = daylight, 2 = bright, ..., 5 = dark). + Writing a value between 1..5 forces the backlight controller + to enter the corresponding ambient light zone. + Writing 0 returns to normal/automatic ambient light level + operation. The ambient light sensing feature on these devices + is an extension to the API documented in + Documentation/ABI/stable/sysfs-class-backlight. + It can be enabled by writing the value stored in + /sys/class/backlight//max_brightness to + /sys/class/backlight//brightness. \ No newline at end of file diff --git a/Documentation/accounting/cgroupstats.txt b/Documentation/accounting/cgroupstats.txt index eda40fd39ca..d16a9849e60 100644 --- a/Documentation/accounting/cgroupstats.txt +++ b/Documentation/accounting/cgroupstats.txt @@ -21,7 +21,7 @@ information will not be available. To extract cgroup statistics a utility very similar to getdelays.c has been developed, the sample output of the utility is shown below -~/balbir/cgroupstats # ./getdelays -C "/cgroup/a" +~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup/a" sleeping 1, blocked 0, running 1, stopped 0, uninterruptible 0 -~/balbir/cgroupstats # ./getdelays -C "/cgroup" +~/balbir/cgroupstats # ./getdelays -C "/sys/fs/cgroup" sleeping 155, blocked 0, running 1, stopped 0, uninterruptible 2 diff --git a/Documentation/cgroups/blkio-controller.txt b/Documentation/cgroups/blkio-controller.txt index 465351d4cf8..cd45c8ea746 100644 --- a/Documentation/cgroups/blkio-controller.txt +++ b/Documentation/cgroups/blkio-controller.txt @@ -28,16 +28,19 @@ cgroups. Here is what you can do. - Enable group scheduling in CFQ CONFIG_CFQ_GROUP_IOSCHED=y -- Compile and boot into kernel and mount IO controller (blkio). +- Compile and boot into kernel and mount IO controller (blkio); see + cgroups.txt, Why are cgroups needed?. - mount -t cgroup -o blkio none /cgroup + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/blkio + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio - Create two cgroups - mkdir -p /cgroup/test1/ /cgroup/test2 + mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2 - Set weights of group test1 and test2 - echo 1000 > /cgroup/test1/blkio.weight - echo 500 > /cgroup/test2/blkio.weight + echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight + echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight - Create two same size files (say 512MB each) on same disk (file1, file2) and launch two dd threads in different cgroup to read those files. @@ -46,12 +49,12 @@ cgroups. Here is what you can do. echo 3 > /proc/sys/vm/drop_caches dd if=/mnt/sdb/zerofile1 of=/dev/null & - echo $! > /cgroup/test1/tasks - cat /cgroup/test1/tasks + echo $! > /sys/fs/cgroup/blkio/test1/tasks + cat /sys/fs/cgroup/blkio/test1/tasks dd if=/mnt/sdb/zerofile2 of=/dev/null & - echo $! > /cgroup/test2/tasks - cat /cgroup/test2/tasks + echo $! > /sys/fs/cgroup/blkio/test2/tasks + cat /sys/fs/cgroup/blkio/test2/tasks - At macro level, first dd should finish first. To get more precise data, keep on looking at (with the help of script), at blkio.disk_time and @@ -68,13 +71,13 @@ Throttling/Upper Limit policy - Enable throttling in block layer CONFIG_BLK_DEV_THROTTLING=y -- Mount blkio controller - mount -t cgroup -o blkio none /cgroup/blkio +- Mount blkio controller (see cgroups.txt, Why are cgroups needed?) + mount -t cgroup -o blkio none /sys/fs/cgroup/blkio - Specify a bandwidth rate on particular device for root group. The format for policy is ": ". - echo "8:16 1048576" > /cgroup/blkio/blkio.read_bps_device + echo "8:16 1048576" > /sys/fs/cgroup/blkio/blkio.read_bps_device Above will put a limit of 1MB/second on reads happening for root group on device having major/minor number 8:16. @@ -108,7 +111,7 @@ Hierarchical Cgroups CFQ and throttling will practically treat all groups at same level. pivot - / | \ \ + / / \ \ root test1 test2 test3 Down the line we can implement hierarchical accounting/control support @@ -149,7 +152,7 @@ Proportional weight policy files Following is the format. - #echo dev_maj:dev_minor weight > /path/to/cgroup/blkio.weight_device + # echo dev_maj:dev_minor weight > blkio.weight_device Configure weight=300 on /dev/sdb (8:16) in this cgroup # echo 8:16 300 > blkio.weight_device # cat blkio.weight_device diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 0ed99f08f1f..cd67e90003c 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -138,11 +138,11 @@ With the ability to classify tasks differently for different resources the admin can easily set up a script which receives exec notifications and depending on who is launching the browser he can - # echo browser_pid > /mnt///tasks + # echo browser_pid > /sys/fs/cgroup///tasks With only a single hierarchy, he now would potentially have to create a separate cgroup for every browser launched and associate it with -approp network and other resource class. This may lead to +appropriate network and other resource class. This may lead to proliferation of such cgroups. Also lets say that the administrator would like to give enhanced network @@ -153,9 +153,9 @@ apps enhanced CPU power, With ability to write pids directly to resource classes, it's just a matter of : - # echo pid > /mnt/network//tasks + # echo pid > /sys/fs/cgroup/network//tasks (after some time) - # echo pid > /mnt/network//tasks + # echo pid > /sys/fs/cgroup/network//tasks Without this ability, he would have to split the cgroup into multiple separate ones and then associate the new cgroups with the @@ -310,21 +310,24 @@ subsystem, this is the case for the cpuset. To start a new job that is to be contained within a cgroup, using the "cpuset" cgroup subsystem, the steps are something like: - 1) mkdir /dev/cgroup - 2) mount -t cgroup -ocpuset cpuset /dev/cgroup - 3) Create the new cgroup by doing mkdir's and write's (or echo's) in - the /dev/cgroup virtual file system. - 4) Start a task that will be the "founding father" of the new job. - 5) Attach that task to the new cgroup by writing its pid to the - /dev/cgroup tasks file for that cgroup. - 6) fork, exec or clone the job tasks from this founding father task. + 1) mount -t tmpfs cgroup_root /sys/fs/cgroup + 2) mkdir /sys/fs/cgroup/cpuset + 3) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + 4) Create the new cgroup by doing mkdir's and write's (or echo's) in + the /sys/fs/cgroup virtual file system. + 5) Start a task that will be the "founding father" of the new job. + 6) Attach that task to the new cgroup by writing its pid to the + /sys/fs/cgroup/cpuset/tasks file for that cgroup. + 7) fork, exec or clone the job tasks from this founding father task. For example, the following sequence of commands will setup a cgroup named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, and then start a subshell 'sh' in that cgroup: - mount -t cgroup cpuset -ocpuset /dev/cgroup - cd /dev/cgroup + mount -t tmpfs cgroup_root /sys/fs/cgroup + mkdir /sys/fs/cgroup/cpuset + mount -t cgroup cpuset -ocpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset mkdir Charlie cd Charlie /bin/echo 2-3 > cpuset.cpus @@ -345,7 +348,7 @@ Creating, modifying, using the cgroups can be done through the cgroup virtual filesystem. To mount a cgroup hierarchy with all available subsystems, type: -# mount -t cgroup xxx /dev/cgroup +# mount -t cgroup xxx /sys/fs/cgroup The "xxx" is not interpreted by the cgroup code, but will appear in /proc/mounts so may be any useful identifying string that you like. @@ -354,23 +357,32 @@ Note: Some subsystems do not work without some user input first. For instance, if cpusets are enabled the user will have to populate the cpus and mems files for each new cgroup created before that group can be used. +As explained in section `1.2 Why are cgroups needed?' you should create +different hierarchies of cgroups for each single resource or group of +resources you want to control. Therefore, you should mount a tmpfs on +/sys/fs/cgroup and create directories for each cgroup resource or resource +group. + +# mount -t tmpfs cgroup_root /sys/fs/cgroup +# mkdir /sys/fs/cgroup/rg1 + To mount a cgroup hierarchy with just the cpuset and memory subsystems, type: -# mount -t cgroup -o cpuset,memory hier1 /dev/cgroup +# mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1 To change the set of subsystems bound to a mounted hierarchy, just remount with different options: -# mount -o remount,cpuset,blkio hier1 /dev/cgroup +# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1 Now memory is removed from the hierarchy and blkio is added. Note this will add blkio to the hierarchy but won't remove memory or cpuset, because the new options are appended to the old ones: -# mount -o remount,blkio /dev/cgroup +# mount -o remount,blkio /sys/fs/cgroup/rg1 To Specify a hierarchy's release_agent: # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ - xxx /dev/cgroup + xxx /sys/fs/cgroup/rg1 Note that specifying 'release_agent' more than once will return failure. @@ -379,17 +391,17 @@ when the hierarchy consists of a single (root) cgroup. Supporting the ability to arbitrarily bind/unbind subsystems from an existing cgroup hierarchy is intended to be implemented in the future. -Then under /dev/cgroup you can find a tree that corresponds to the -tree of the cgroups in the system. For instance, /dev/cgroup +Then under /sys/fs/cgroup/rg1 you can find a tree that corresponds to the +tree of the cgroups in the system. For instance, /sys/fs/cgroup/rg1 is the cgroup that holds the whole system. If you want to change the value of release_agent: -# echo "/sbin/new_release_agent" > /dev/cgroup/release_agent +# echo "/sbin/new_release_agent" > /sys/fs/cgroup/rg1/release_agent It can also be changed via remount. -If you want to create a new cgroup under /dev/cgroup: -# cd /dev/cgroup +If you want to create a new cgroup under /sys/fs/cgroup/rg1: +# cd /sys/fs/cgroup/rg1 # mkdir my_cgroup Now you want to do something with this cgroup. diff --git a/Documentation/cgroups/cpuacct.txt b/Documentation/cgroups/cpuacct.txt index 8b930946c52..9ad85df4b98 100644 --- a/Documentation/cgroups/cpuacct.txt +++ b/Documentation/cgroups/cpuacct.txt @@ -10,26 +10,25 @@ directly present in its group. Accounting groups can be created by first mounting the cgroup filesystem. -# mkdir /cgroups -# mount -t cgroup -ocpuacct none /cgroups +# mount -t cgroup -ocpuacct none /sys/fs/cgroup -With the above step, the initial or the parent accounting group -becomes visible at /cgroups. At bootup, this group includes all the -tasks in the system. /cgroups/tasks lists the tasks in this cgroup. -/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by -this group which is essentially the CPU time obtained by all the tasks +With the above step, the initial or the parent accounting group becomes +visible at /sys/fs/cgroup. At bootup, this group includes all the tasks in +the system. /sys/fs/cgroup/tasks lists the tasks in this cgroup. +/sys/fs/cgroup/cpuacct.usage gives the CPU time (in nanoseconds) obtained +by this group which is essentially the CPU time obtained by all the tasks in the system. -New accounting groups can be created under the parent group /cgroups. +New accounting groups can be created under the parent group /sys/fs/cgroup. -# cd /cgroups +# cd /sys/fs/cgroup # mkdir g1 # echo $$ > g1 The above steps create a new group g1 and move the current shell process (bash) into it. CPU time consumed by this bash and its children can be obtained from g1/cpuacct.usage and the same is accumulated in -/cgroups/cpuacct.usage also. +/sys/fs/cgroup/cpuacct.usage also. cpuacct.stat file lists a few statistics which further divide the CPU time obtained by the cgroup into user and system times. Currently diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 98a30829af7..5b0d78e55cc 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -661,21 +661,21 @@ than stress the kernel. To start a new job that is to be contained within a cpuset, the steps are: - 1) mkdir /dev/cpuset - 2) mount -t cgroup -ocpuset cpuset /dev/cpuset + 1) mkdir /sys/fs/cgroup/cpuset + 2) mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset 3) Create the new cpuset by doing mkdir's and write's (or echo's) in - the /dev/cpuset virtual file system. + the /sys/fs/cgroup/cpuset virtual file system. 4) Start a task that will be the "founding father" of the new job. 5) Attach that task to the new cpuset by writing its pid to the - /dev/cpuset tasks file for that cpuset. + /sys/fs/cgroup/cpuset tasks file for that cpuset. 6) fork, exec or clone the job tasks from this founding father task. For example, the following sequence of commands will setup a cpuset named "Charlie", containing just CPUs 2 and 3, and Memory Node 1, and then start a subshell 'sh' in that cpuset: - mount -t cgroup -ocpuset cpuset /dev/cpuset - cd /dev/cpuset + mount -t cgroup -ocpuset cpuset /sys/fs/cgroup/cpuset + cd /sys/fs/cgroup/cpuset mkdir Charlie cd Charlie /bin/echo 2-3 > cpuset.cpus @@ -710,14 +710,14 @@ Creating, modifying, using the cpusets can be done through the cpuset virtual filesystem. To mount it, type: -# mount -t cgroup -o cpuset cpuset /dev/cpuset +# mount -t cgroup -o cpuset cpuset /sys/fs/cgroup/cpuset -Then under /dev/cpuset you can find a tree that corresponds to the -tree of the cpusets in the system. For instance, /dev/cpuset +Then under /sys/fs/cgroup/cpuset you can find a tree that corresponds to the +tree of the cpusets in the system. For instance, /sys/fs/cgroup/cpuset is the cpuset that holds the whole system. -If you want to create a new cpuset under /dev/cpuset: -# cd /dev/cpuset +If you want to create a new cpuset under /sys/fs/cgroup/cpuset: +# cd /sys/fs/cgroup/cpuset # mkdir my_cpuset Now you want to do something with this cpuset. @@ -765,12 +765,12 @@ wrapper around the cgroup filesystem. The command -mount -t cpuset X /dev/cpuset +mount -t cpuset X /sys/fs/cgroup/cpuset is equivalent to -mount -t cgroup -ocpuset,noprefix X /dev/cpuset -echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent +mount -t cgroup -ocpuset,noprefix X /sys/fs/cgroup/cpuset +echo "/sbin/cpuset_release_agent" > /sys/fs/cgroup/cpuset/release_agent 2.2 Adding/removing cpus ------------------------ diff --git a/Documentation/cgroups/devices.txt b/Documentation/cgroups/devices.txt index 57ca4c89fe5..16624a7f822 100644 --- a/Documentation/cgroups/devices.txt +++ b/Documentation/cgroups/devices.txt @@ -22,16 +22,16 @@ removed from the child(ren). An entry is added using devices.allow, and removed using devices.deny. For instance - echo 'c 1:3 mr' > /cgroups/1/devices.allow + echo 'c 1:3 mr' > /sys/fs/cgroup/1/devices.allow allows cgroup 1 to read and mknod the device usually known as /dev/null. Doing - echo a > /cgroups/1/devices.deny + echo a > /sys/fs/cgroup/1/devices.deny will remove the default 'a *:* rwm' entry. Doing - echo a > /cgroups/1/devices.allow + echo a > /sys/fs/cgroup/1/devices.allow will add the 'a *:* rwm' entry to the whitelist. diff --git a/Documentation/cgroups/freezer-subsystem.txt b/Documentation/cgroups/freezer-subsystem.txt index 41f37fea127..c21d77742a0 100644 --- a/Documentation/cgroups/freezer-subsystem.txt +++ b/Documentation/cgroups/freezer-subsystem.txt @@ -59,28 +59,28 @@ is non-freezable. * Examples of usage : - # mkdir /containers - # mount -t cgroup -ofreezer freezer /containers - # mkdir /containers/0 - # echo $some_pid > /containers/0/tasks + # mkdir /sys/fs/cgroup/freezer + # mount -t cgroup -ofreezer freezer /sys/fs/cgroup/freezer + # mkdir /sys/fs/cgroup/freezer/0 + # echo $some_pid > /sys/fs/cgroup/freezer/0/tasks to get status of the freezer subsystem : - # cat /containers/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state THAWED to freeze all tasks in the container : - # echo FROZEN > /containers/0/freezer.state - # cat /containers/0/freezer.state + # echo FROZEN > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state FREEZING - # cat /containers/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state FROZEN to unfreeze all tasks in the container : - # echo THAWED > /containers/0/freezer.state - # cat /containers/0/freezer.state + # echo THAWED > /sys/fs/cgroup/freezer/0/freezer.state + # cat /sys/fs/cgroup/freezer/0/freezer.state THAWED This is the basic mechanism which should do the right thing for user space task diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 7c163477fcd..06eb6d957c8 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -1,8 +1,8 @@ Memory Resource Controller -NOTE: The Memory Resource Controller has been generically been referred - to as the memory controller in this document. Do not confuse memory - controller used here with the memory controller that is used in hardware. +NOTE: The Memory Resource Controller has generically been referred to as the + memory controller in this document. Do not confuse memory controller + used here with the memory controller that is used in hardware. (For editors) In this document: @@ -70,6 +70,7 @@ Brief summary of control files. (See sysctl's vm.swappiness) memory.move_charge_at_immigrate # set/show controls of moving charges memory.oom_control # set/show oom controls. + memory.numa_stat # show the number of memory usage per numa node 1. History @@ -181,7 +182,7 @@ behind this approach is that a cgroup that aggressively uses a shared page will eventually get charged for it (once it is uncharged from the cgroup that brought it in -- this will happen on memory pressure). -Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used.. +Exception: If CONFIG_CGROUP_CGROUP_MEM_RES_CTLR_SWAP is not used. When you do swapoff and make swapped-out pages of shmem(tmpfs) to be backed into memory in force, charges for pages are accounted against the caller of swapoff rather than the users of shmem. @@ -213,7 +214,7 @@ affecting global LRU, memory+swap limit is better than just limiting swap from OS point of view. * What happens when a cgroup hits memory.memsw.limit_in_bytes -When a cgroup his memory.memsw.limit_in_bytes, it's useless to do swap-out +When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out in this cgroup. Then, swap-out will not be done by cgroup routine and file caches are dropped. But as mentioned above, global LRU can do swapout memory from it for sanity of the system's memory management state. You can't forbid @@ -263,16 +264,17 @@ b. Enable CONFIG_RESOURCE_COUNTERS c. Enable CONFIG_CGROUP_MEM_RES_CTLR d. Enable CONFIG_CGROUP_MEM_RES_CTLR_SWAP (to use swap extension) -1. Prepare the cgroups -# mkdir -p /cgroups -# mount -t cgroup none /cgroups -o memory +1. Prepare the cgroups (see cgroups.txt, Why are cgroups needed?) +# mount -t tmpfs none /sys/fs/cgroup +# mkdir /sys/fs/cgroup/memory +# mount -t cgroup none /sys/fs/cgroup/memory -o memory 2. Make the new group and move bash into it -# mkdir /cgroups/0 -# echo $$ > /cgroups/0/tasks +# mkdir /sys/fs/cgroup/memory/0 +# echo $$ > /sys/fs/cgroup/memory/0/tasks Since now we're in the 0 cgroup, we can alter the memory limit: -# echo 4M > /cgroups/0/memory.limit_in_bytes +# echo 4M > /sys/fs/cgroup/memory/0/memory.limit_in_bytes NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.) @@ -280,11 +282,11 @@ mega or gigabytes. (Here, Kilo, Mega, Giga are Kibibytes, Mebibytes, Gibibytes.) NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited). NOTE: We cannot set limits on the root cgroup any more. -# cat /cgroups/0/memory.limit_in_bytes +# cat /sys/fs/cgroup/memory/0/memory.limit_in_bytes 4194304 We can check the usage: -# cat /cgroups/0/memory.usage_in_bytes +# cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes 1216512 A successful write to this file does not guarantee a successful set of @@ -464,6 +466,24 @@ value for efficient access. (Of course, when necessary, it's synchronized.) If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) value in memory.stat(see 5.2). +5.6 numa_stat + +This is similar to numa_maps but operates on a per-memcg basis. This is +useful for providing visibility into the numa locality information within +an memcg since the pages are allowed to be allocated from any physical +node. One of the usecases is evaluating application performance by +combining this information with the application's cpu allocation. + +We export "total", "file", "anon" and "unevictable" pages per-node for +each memcg. The ouput format of memory.numa_stat is: + +total= N0= N1= ... +file= N0= N1= ... +anon= N0= N1= ... +unevictable= N0= N1= ... + +And we have total = file + anon + unevictable. + 6. Hierarchy support The memory controller supports a deep hierarchy and hierarchical accounting. @@ -471,13 +491,13 @@ The hierarchy is created by creating the appropriate cgroups in the cgroup filesystem. Consider for example, the following cgroup filesystem hierarchy - root + root / | \ - / | \ - a b c - | \ - | \ - d e + / | \ + a b c + | \ + | \ + d e In the diagram above, with hierarchical accounting enabled, all memory usage of e, is accounted to its ancestors up until the root (i.e, c and root), diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1a9446b5915..72e238465b0 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -481,23 +481,6 @@ Who: FUJITA Tomonori ---------------------------- -What: namespace cgroup (ns_cgroup) -When: 2.6.38 -Why: The ns_cgroup leads to some problems: - * cgroup creation is out-of-control - * cgroup name can conflict when pids are looping - * it is not possible to have a single process handling - a lot of namespaces without falling in a exponential creation time - * we may want to create a namespace without creating a cgroup - - The ns_cgroup is replaced by a compatibility flag 'clone_children', - where a newly created cgroup will copy the parent cgroup values. - The userspace has to manually create a cgroup and add a task to - the 'tasks' file. -Who: Daniel Lezcano - ----------------------------- - What: iwlwifi disable_hw_scan module parameters When: 2.6.40 Why: Hareware scan is the prefer method for iwlwifi devices for diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index f4817802406..db3b1aba32a 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -843,6 +843,7 @@ Provides counts of softirq handlers serviced since boot time, for each cpu. TASKLET: 0 0 0 290 SCHED: 27035 26983 26971 26746 HRTIMER: 0 0 0 0 + RCU: 1678 1769 2178 2250 1.3 IDE devices in /proc/ide diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index d9a203b058f..fd248a31821 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2598,6 +2598,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. unlock ejectable media); m = MAX_SECTORS_64 (don't transfer more than 64 sectors = 32 KB at a time); + n = INITIAL_READ10 (force a retry of the + initial READ(10) command); o = CAPACITY_OK (accept the capacity reported by the device); r = IGNORE_RESIDUE (the device reports diff --git a/Documentation/kmemleak.txt b/Documentation/kmemleak.txt index 090e6ee0453..51063e681ca 100644 --- a/Documentation/kmemleak.txt +++ b/Documentation/kmemleak.txt @@ -11,7 +11,9 @@ with the difference that the orphan objects are not freed but only reported via /sys/kernel/debug/kmemleak. A similar method is used by the Valgrind tool (memcheck --leak-check) to detect the memory leaks in user-space applications. -Kmemleak is supported on x86, arm, powerpc, sparc, sh, microblaze and tile. + +Please check DEBUG_KMEMLEAK dependencies in lib/Kconfig.debug for supported +architectures. Usage ----- diff --git a/Documentation/md.txt b/Documentation/md.txt index 2366b1c8cf1..f0eee83ff78 100644 --- a/Documentation/md.txt +++ b/Documentation/md.txt @@ -555,7 +555,7 @@ also have sync_min sync_max The two values, given as numbers of sectors, indicate a range - withing the array where 'check'/'repair' will operate. Must be + within the array where 'check'/'repair' will operate. Must be a multiple of chunk_size. When it reaches "sync_max" it will pause, rather than complete. You can use 'select' or 'poll' on "sync_completed" to wait for diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 1b5a5ddbc3e..5df176ed59b 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -9,7 +9,121 @@ If variable is of Type, use printk format specifier: size_t %zu or %zx ssize_t %zd or %zx -Raw pointer value SHOULD be printed with %p. +Raw pointer value SHOULD be printed with %p. The kernel supports +the following extended format specifiers for pointer types: + +Symbols/Function Pointers: + + %pF versatile_init+0x0/0x110 + %pf versatile_init + %pS versatile_init+0x0/0x110 + %ps versatile_init + %pB prev_fn_of_versatile_init+0x88/0x88 + + For printing symbols and function pointers. The 'S' and 's' specifiers + result in the symbol name with ('S') or without ('s') offsets. Where + this is used on a kernel without KALLSYMS - the symbol address is + printed instead. + + The 'B' specifier results in the symbol name with offsets and should be + used when printing stack backtraces. The specifier takes into + consideration the effect of compiler optimisations which may occur + when tail-call's are used and marked with the noreturn GCC attribute. + + On ia64, ppc64 and parisc64 architectures function pointers are + actually function descriptors which must first be resolved. The 'F' and + 'f' specifiers perform this resolution and then provide the same + functionality as the 'S' and 's' specifiers. + +Kernel Pointers: + + %pK 0x01234567 or 0x0123456789abcdef + + For printing kernel pointers which should be hidden from unprivileged + users. The behaviour of %pK depends on the kptr_restrict sysctl - see + Documentation/sysctl/kernel.txt for more details. + +Struct Resources: + + %pr [mem 0x60000000-0x6fffffff flags 0x2200] or + [mem 0x0000000060000000-0x000000006fffffff flags 0x2200] + %pR [mem 0x60000000-0x6fffffff pref] or + [mem 0x0000000060000000-0x000000006fffffff pref] + + For printing struct resources. The 'R' and 'r' specifiers result in a + printed resource with ('R') or without ('r') a decoded flags member. + +MAC/FDDI addresses: + + %pM 00:01:02:03:04:05 + %pMF 00-01-02-03-04-05 + %pm 000102030405 + + For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm' + specifiers result in a printed address with ('M') or without ('m') byte + separators. The default byte separator is the colon (':'). + + Where FDDI addresses are concerned the 'F' specifier can be used after + the 'M' specifier to use dash ('-') separators instead of the default + separator. + +IPv4 addresses: + + %pI4 1.2.3.4 + %pi4 001.002.003.004 + %p[Ii][hnbl] + + For printing IPv4 dot-separated decimal addresses. The 'I4' and 'i4' + specifiers result in a printed address with ('i4') or without ('I4') + leading zeros. + + The additional 'h', 'n', 'b', and 'l' specifiers are used to specify + host, network, big or little endian order addresses respectively. Where + no specifier is provided the default network/big endian order is used. + +IPv6 addresses: + + %pI6 0001:0002:0003:0004:0005:0006:0007:0008 + %pi6 00010002000300040005000600070008 + %pI6c 1:2:3:4:5:6:7:8 + + For printing IPv6 network-order 16-bit hex addresses. The 'I6' and 'i6' + specifiers result in a printed address with ('I6') or without ('i6') + colon-separators. Leading zeros are always used. + + The additional 'c' specifier can be used with the 'I' specifier to + print a compressed IPv6 address as described by + http://tools.ietf.org/html/rfc5952 + +UUID/GUID addresses: + + %pUb 00010203-0405-0607-0809-0a0b0c0d0e0f + %pUB 00010203-0405-0607-0809-0A0B0C0D0E0F + %pUl 03020100-0504-0706-0809-0a0b0c0e0e0f + %pUL 03020100-0504-0706-0809-0A0B0C0E0E0F + + For printing 16-byte UUID/GUIDs addresses. The additional 'l', 'L', + 'b' and 'B' specifiers are used to specify a little endian order in + lower ('l') or upper case ('L') hex characters - and big endian order + in lower ('b') or upper case ('B') hex characters. + + Where no additional specifiers are used the default little endian + order with lower case hex characters will be printed. + +struct va_format: + + %pV + + For printing struct va_format structures. These contain a format string + and va_list as follows: + + struct va_format { + const char *fmt; + va_list *va; + }; + + Do not use this feature without some mechanism to verify the + correctness of the format string and va_list arguments. u64 SHOULD be printed with %llu/%llx, (unsigned long long): @@ -32,4 +146,5 @@ Reminder: sizeof() result is of type size_t. Thank you for your cooperation and attention. -By Randy Dunlap +By Randy Dunlap and +Andrew Murray diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt index 99961993257..91ecff07ced 100644 --- a/Documentation/scheduler/sched-design-CFS.txt +++ b/Documentation/scheduler/sched-design-CFS.txt @@ -223,9 +223,10 @@ When CONFIG_FAIR_GROUP_SCHED is defined, a "cpu.shares" file is created for each group created using the pseudo filesystem. See example steps below to create task groups and modify their CPU share using the "cgroups" pseudo filesystem. - # mkdir /dev/cpuctl - # mount -t cgroup -ocpu none /dev/cpuctl - # cd /dev/cpuctl + # mount -t tmpfs cgroup_root /sys/fs/cgroup + # mkdir /sys/fs/cgroup/cpu + # mount -t cgroup -ocpu none /sys/fs/cgroup/cpu + # cd /sys/fs/cgroup/cpu # mkdir multimedia # create "multimedia" group of tasks # mkdir browser # create "browser" group of tasks diff --git a/Documentation/scheduler/sched-rt-group.txt b/Documentation/scheduler/sched-rt-group.txt index 605b0d40329..71b54d54998 100644 --- a/Documentation/scheduler/sched-rt-group.txt +++ b/Documentation/scheduler/sched-rt-group.txt @@ -129,9 +129,8 @@ priority! Enabling CONFIG_RT_GROUP_SCHED lets you explicitly allocate real CPU bandwidth to task groups. -This uses the /cgroup virtual file system and -"/cgroup//cpu.rt_runtime_us" to control the CPU time reserved for each -control group. +This uses the cgroup virtual file system and "/cpu.rt_runtime_us" +to control the CPU time reserved for each control group. For more information on working with control groups, you should read Documentation/cgroups/cgroups.txt as well. @@ -150,7 +149,7 @@ For now, this can be simplified to just the following (but see Future plans): =============== There is work in progress to make the scheduling period for each group -("/cgroup//cpu.rt_period_us") configurable as well. +("/cpu.rt_period_us") configurable as well. The constraint on the period is that a subgroup must have a smaller or equal period to its parent. But realistically its not very useful _yet_ diff --git a/Documentation/vm/hwpoison.txt b/Documentation/vm/hwpoison.txt index 12f9ba20ccb..55006846660 100644 --- a/Documentation/vm/hwpoison.txt +++ b/Documentation/vm/hwpoison.txt @@ -129,12 +129,12 @@ Limit injection to pages owned by memgroup. Specified by inode number of the memcg. Example: - mkdir /cgroup/hwpoison + mkdir /sys/fs/cgroup/mem/hwpoison usemem -m 100 -s 1000 & - echo `jobs -p` > /cgroup/hwpoison/tasks + echo `jobs -p` > /sys/fs/cgroup/mem/hwpoison/tasks - memcg_ino=$(ls -id /cgroup/hwpoison | cut -f1 -d' ') + memcg_ino=$(ls -id /sys/fs/cgroup/mem/hwpoison | cut -f1 -d' ') echo $memcg_ino > /debug/hwpoison/corrupt-filter-memcg page-types -p `pidof init` --hwpoison # shall do nothing diff --git a/MAINTAINERS b/MAINTAINERS index 29801f760b6..f0358cd91de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1739,7 +1739,7 @@ S: Supported F: drivers/net/enic/ CIRRUS LOGIC EP93XX ETHERNET DRIVER -M: Lennert Buytenhek +M: Hartley Sweeten L: netdev@vger.kernel.org S: Maintained F: drivers/net/arm/ep93xx_eth.c @@ -1889,7 +1889,6 @@ L: cpufreq@vger.kernel.org W: http://www.codemonkey.org.uk/projects/cpufreq/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git S: Maintained -F: arch/x86/kernel/cpu/cpufreq/ F: drivers/cpufreq/ F: include/linux/cpufreq.h @@ -2292,8 +2291,7 @@ F: drivers/scsi/eata_pio.* EBTABLES M: Bart De Schuymer -L: ebtables-user@lists.sourceforge.net -L: ebtables-devel@lists.sourceforge.net +L: netfilter-devel@vger.kernel.org W: http://ebtables.sourceforge.net/ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h @@ -3820,6 +3818,12 @@ S: Maintained F: drivers/leds/ F: include/linux/leds.h +LEGACY EEPROM DRIVER +M: Jean Delvare +S: Maintained +F: Documentation/misc-devices/eeprom +F: drivers/misc/eeprom/eeprom.c + LEGO USB Tower driver M: Juergen Stuber L: legousb-devel@lists.sourceforge.net @@ -4145,7 +4149,7 @@ F: include/linux/mm.h F: mm/ MEMORY RESOURCE CONTROLLER -M: Balbir Singh +M: Balbir Singh M: Daisuke Nishimura M: KAMEZAWA Hiroyuki L: linux-mm@kvack.org @@ -4252,8 +4256,7 @@ F: drivers/mmc/ F: include/linux/mmc/ MULTIMEDIA CARD (MMC) ETC. OVER SPI -M: David Brownell -S: Odd Fixes +S: Orphan F: drivers/mmc/host/mmc_spi.c F: include/linux/spi/mmc_spi.h @@ -4603,7 +4606,6 @@ F: drivers/media/video/omap3isp/* OMAP USB SUPPORT M: Felipe Balbi -M: David Brownell L: linux-usb@vger.kernel.org L: linux-omap@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git @@ -4892,7 +4894,7 @@ F: mm/percpu*.c F: arch/*/include/asm/percpu.h PER-TASK DELAY ACCOUNTING -M: Balbir Singh +M: Balbir Singh S: Maintained F: include/linux/delayacct.h F: kernel/delayacct.c @@ -4947,6 +4949,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32.gi F: drivers/input/serio/i8042-unicore32io.h F: drivers/i2c/busses/i2c-puv3.c F: drivers/video/fb-puv3.c +F: drivers/rtc/rtc-puv3.c PMC SIERRA MaxRAID DRIVER M: Anil Ravindranath @@ -5984,7 +5987,6 @@ F: Documentation/serial/specialix.txt F: drivers/staging/tty/specialix* SPI SUBSYSTEM -M: David Brownell M: Grant Likely L: spi-devel-general@lists.sourceforge.net Q: http://patchwork.kernel.org/project/spi-devel-general/list/ @@ -6100,7 +6102,7 @@ F: include/target/ F: Documentation/target/ TASKSTATS STATISTICS INTERFACE -M: Balbir Singh +M: Balbir Singh S: Maintained F: Documentation/accounting/taskstats* F: include/linux/taskstats* @@ -6432,9 +6434,8 @@ S: Maintained F: drivers/usb/misc/rio500* USB EHCI DRIVER -M: David Brownell L: linux-usb@vger.kernel.org -S: Odd Fixes +S: Orphan F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* @@ -6448,9 +6449,10 @@ S: Maintained F: drivers/media/video/et61x251/ USB GADGET/PERIPHERAL SUBSYSTEM -M: David Brownell +M: Felipe Balbi L: linux-usb@vger.kernel.org W: http://www.linux-usb.org/gadget +T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/gadget/ F: include/linux/usb/gadget* @@ -6460,7 +6462,7 @@ M: Jiri Kosina L: linux-usb@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git S: Maintained -F: Documentation/usb/hiddev.txt +F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ USB ISP116X DRIVER @@ -6492,9 +6494,8 @@ S: Maintained F: sound/usb/midi.* USB OHCI DRIVER -M: David Brownell L: linux-usb@vger.kernel.org -S: Odd Fixes +S: Orphan F: Documentation/usb/ohci.txt F: drivers/usb/host/ohci* @@ -6720,6 +6721,14 @@ S: Maintained F: Documentation/filesystems/vfat.txt F: fs/fat/ +VIDEOBUF2 FRAMEWORK +M: Pawel Osciak +M: Marek Szyprowski +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/video/videobuf2-* +F: include/media/videobuf2-* + VIRTIO CONSOLE DRIVER M: Amit Shah L: virtualization@lists.linux-foundation.org @@ -6997,6 +7006,13 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86. S: Maintained F: drivers/platform/x86 +X86 MCE INFRASTRUCTURE +M: Tony Luck +M: Borislav Petkov +L: linux-edac@vger.kernel.org +S: Maintained +F: arch/x86/kernel/cpu/mcheck/* + XEN HYPERVISOR INTERFACE M: Jeremy Fitzhardinge M: Konrad Rzeszutek Wilk diff --git a/Makefile b/Makefile index afb8e0d26f2..41330a06e4e 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 0 SUBLEVEL = 0 -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc4 NAME = Sneaky Weasel # *DOCUMENTATION* @@ -378,7 +378,7 @@ KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds # Read KERNELRELEASE from include/config/kernel.release (if it exists) KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null) -KERNELVERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) +KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION) export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC @@ -1005,7 +1005,7 @@ endef define filechk_version.h (echo \#define LINUX_VERSION_CODE $(shell \ - expr $(VERSION) \* 65536 + $(PATCHLEVEL) \* 256 + $(SUBLEVEL)); \ + expr $(VERSION) \* 65536 + 0$(PATCHLEVEL) \* 256 + 0$(SUBLEVEL)); \ echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef @@ -1110,11 +1110,6 @@ modules_install: _modinst_ _modinst_post PHONY += _modinst_ _modinst_: - @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \ - echo "Warning: you may need to install module-init-tools"; \ - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ - sleep 1; \ - fi @rm -rf $(MODLIB)/kernel @rm -f $(MODLIB)/source @mkdir -p $(MODLIB)/kernel @@ -1531,12 +1526,8 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)) # Run depmod only if we have System.map and depmod is executable quiet_cmd_depmod = DEPMOD $(KERNELRELEASE) - cmd_depmod = \ - if [ -r System.map -a -x $(DEPMOD) ]; then \ - $(DEPMOD) -ae -F System.map \ - $(if $(strip $(INSTALL_MOD_PATH)), -b $(INSTALL_MOD_PATH) ) \ - $(KERNELRELEASE); \ - fi + cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \ + $(KERNELRELEASE) # Create temporary dir for module support files # clean it up only when building all modules diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 376f2213079..326f0a2d56e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -409,7 +409,7 @@ SYSCALL_DEFINE2(osf_getdomainname, char __user *, name, int, namelen) return -EFAULT; len = namelen; - if (namelen > 32) + if (len > 32) len = 32; down_read(&uts_sem); @@ -594,7 +594,7 @@ SYSCALL_DEFINE3(osf_sysinfo, int, command, char __user *, buf, long, count) down_read(&uts_sem); res = sysinfo_table[offset]; len = strlen(res)+1; - if (len > count) + if ((unsigned long)len > (unsigned long)count) len = count; if (copy_to_user(buf, res, len)) err = -EFAULT; @@ -649,7 +649,7 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer, return 1; case GSI_GET_HWRPB: - if (nbytes < sizeof(*hwrpb)) + if (nbytes > sizeof(*hwrpb)) return -EINVAL; if (copy_to_user(buffer, hwrpb, nbytes) != 0) return -EFAULT; @@ -1008,6 +1008,7 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, { struct rusage r; long ret, err; + unsigned int status = 0; mm_segment_t old_fs; if (!ur) @@ -1016,13 +1017,15 @@ SYSCALL_DEFINE4(osf_wait4, pid_t, pid, int __user *, ustatus, int, options, old_fs = get_fs(); set_fs (KERNEL_DS); - ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r); + ret = sys_wait4(pid, (unsigned int __user *) &status, options, + (struct rusage __user *) &r); set_fs (old_fs); if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur))) return -EFAULT; err = 0; + err |= put_user(status, ustatus); err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec); err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec); err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec); diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index f9da41921c5..942fad97e44 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -691,9 +691,9 @@ proc_types: .word 0x41069260 @ ARM926EJ-S (v5TEJ) .word 0xff0ffff0 - b __arm926ejs_mmu_cache_on - b __armv4_mmu_cache_off - b __armv5tej_mmu_cache_flush + W(b) __arm926ejs_mmu_cache_on + W(b) __armv4_mmu_cache_off + W(b) __armv5tej_mmu_cache_flush .word 0x00007000 @ ARM7 IDs .word 0x0000f000 diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig index 889922ad229..67b5abb6f85 100644 --- a/arch/arm/configs/davinci_all_defconfig +++ b/arch/arm/configs/davinci_all_defconfig @@ -157,7 +157,7 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_XFS_FS=m diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig index 316af5479d9..9c0ad799398 100644 --- a/arch/arm/configs/netx_defconfig +++ b/arch/arm/configs/netx_defconfig @@ -60,7 +60,7 @@ CONFIG_FB_ARMCLCD=y # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index 8b0c717378f..1d01ddd3312 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -142,7 +142,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_USB_G_PRINTER=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_SA1100=m CONFIG_EXT2_FS=m diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig index 5b550414364..721832ffe2d 100644 --- a/arch/arm/configs/xcep_defconfig +++ b/arch/arm/configs/xcep_defconfig @@ -73,7 +73,7 @@ CONFIG_SENSORS_MAX6650=m # CONFIG_VGA_CONSOLE is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_SA1100=m CONFIG_DMADEVICES=y # CONFIG_DNOTIFY is not set diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig index 960f65514d8..59577ad3f4e 100644 --- a/arch/arm/configs/zeus_defconfig +++ b/arch/arm/configs/zeus_defconfig @@ -158,7 +158,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_PXA=m CONFIG_EXT2_FS=y diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index a701e4226a6..0cdd7b456cb 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -76,6 +76,9 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) unsigned long dt_root; const char *model; + if (!dt_phys) + return NULL; + devtree = phys_to_virt(dt_phys); /* check device tree validity */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index e8d88567680..90c62cd51ca 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -435,6 +435,10 @@ __irq_usr: usr_entry kuser_cmpxchg_check +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif + get_thread_info tsk #ifdef CONFIG_PREEMPT ldr r8, [tsk, #TI_PREEMPT] @ get preempt count @@ -453,7 +457,7 @@ __irq_usr: #endif mov why, #0 - b ret_to_user + b ret_to_user_from_irq UNWIND(.fnend ) ENDPROC(__irq_usr) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 1e7b04a40a3..b2a27b6b004 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -64,6 +64,7 @@ work_resched: ENTRY(ret_to_user) ret_slow_syscall: disable_irq @ disable interrupts +ENTRY(ret_to_user_from_irq) ldr r1, [tsk, #TI_FLAGS] tst r1, #_TIF_WORK_MASK bne work_pending @@ -75,6 +76,7 @@ no_work_pending: arch_ret_to_user r1, lr restore_user_regs fast = 0, offset = 0 +ENDPROC(ret_to_user_from_irq) ENDPROC(ret_to_user) /* diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index d52eec268b4..6807cb1e76d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -139,7 +139,7 @@ static void dump_instr(const char *lvl, struct pt_regs *regs) fs = get_fs(); set_fs(KERNEL_DS); - for (i = -4; i < 1; i++) { + for (i = -4; i < 1 + !!thumb; i++) { unsigned int val, bad; if (thumb) @@ -563,7 +563,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) if (!pmd_present(*pmd)) goto bad_access; pte = pte_offset_map_lock(mm, pmd, addr, &ptl); - if (!pte_present(*pte) || !pte_dirty(*pte)) { + if (!pte_present(*pte) || !pte_write(*pte) || !pte_dirty(*pte)) { pte_unmap_unlock(pte, ptl); goto bad_access; } diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 4e66881c7ae..fc4e98ea754 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -494,7 +494,7 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 8f4f736aa26..806a2f02b98 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -298,7 +298,7 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -struct platform_device davinci_pcm_device = { +static struct platform_device davinci_pcm_device = { .name = "davinci-pcm-audio", .id = -1, }; diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c index a0b838894ac..e7221398e5a 100644 --- a/arch/arm/mach-davinci/gpio.c +++ b/arch/arm/mach-davinci/gpio.c @@ -252,9 +252,11 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { - struct davinci_gpio_regs __iomem *g = irq2regs(irq); + struct davinci_gpio_regs __iomem *g; u32 mask = 0xffff; + g = (__force struct davinci_gpio_regs __iomem *) irq_desc_get_handler_data(desc); + /* we only care about one bank */ if (irq & 1) mask <<= 16; @@ -422,8 +424,7 @@ static int __init davinci_gpio_irq_setup(void) /* set up all irqs in this bank */ irq_set_chained_handler(bank_irq, gpio_irq_handler); - irq_set_chip_data(bank_irq, (__force void *)g); - irq_set_handler_data(bank_irq, (void *)irq); + irq_set_handler_data(bank_irq, (__force void *)g); for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) { irq_set_chip(irq, &gpio_irqchip); diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 82079545adc..1d4b65fd673 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -402,11 +402,15 @@ static struct resource ep93xx_eth_resource[] = { } }; +static u64 ep93xx_eth_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_eth_device = { .name = "ep93xx-eth", .id = -1, .dev = { - .platform_data = &ep93xx_eth_data, + .platform_data = &ep93xx_eth_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_eth_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_eth_resource), .resource = ep93xx_eth_resource, diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e55714..1435fc31c4b 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # machine support menu "EXYNOS4 Machines" @@ -176,6 +181,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index a9bb94fabaa..60fe5ecf359 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index 08813a6f66b..9babe4473e8 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -98,7 +98,7 @@ static struct map_desc exynos4_iodesc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE, }, { - .virtual = (unsigned long)S5P_VA_USB_HSPHY, + .virtual = (unsigned long)S3C_VA_USB_HSPHY, .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, .type = MT_DEVICE, diff --git a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h index 703118d5173..c337cf3a71b 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h +++ b/arch/arm/mach-exynos4/include/mach/regs-usb-phy.h @@ -11,7 +11,7 @@ #ifndef __PLAT_S5P_REGS_USB_PHY_H #define __PLAT_S5P_REGS_USB_PHY_H -#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S5P_VA_USB_HSPHY) +#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY) #define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00) #define PHY1_HSIC_NORMAL_MASK (0xf << 9) diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c similarity index 100% rename from arch/arm/mach-exynos4/usb-phy.c rename to arch/arm/mach-exynos4/setup-usb-phy.c diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c index 86b9fa0d363..ebb8f38d540 100644 --- a/arch/arm/mach-exynos4/time.c +++ b/arch/arm/mach-exynos4/time.c @@ -206,6 +206,7 @@ static cycle_t exynos4_pwm4_read(struct clocksource *cs) return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); } +#ifdef CONFIG_PM static void exynos4_pwm4_resume(struct clocksource *cs) { unsigned long pclk; @@ -218,6 +219,7 @@ static void exynos4_pwm4_resume(struct clocksource *cs) exynos4_pwm_init(4, ~0); exynos4_pwm_start(4, 1); } +#endif struct clocksource pwm_clocksource = { .name = "pwm_timer4", diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c index 5f1f9867fc7..121ad1d4fa3 100644 --- a/arch/arm/mach-footbridge/dc21285-timer.c +++ b/arch/arm/mach-footbridge/dc21285-timer.c @@ -103,6 +103,7 @@ static void __init footbridge_timer_init(void) clockevents_calc_mult_shift(ce, mem_fclk_21285, 5); ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce); ce->min_delta_ns = clockevent_delta2ns(0x000004, ce); + ce->cpumask = cpumask_of(smp_processor_id()); clockevents_register_device(ce); } diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index 30b971d6581..1be2eeb7a0a 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -26,6 +26,7 @@ #include #else +#include /* For EBSA285 debugging */ .equ dc21285_high, ARMCSR_BASE & 0xff000000 .equ dc21285_low, ARMCSR_BASE & 0x00ffffff @@ -36,8 +37,8 @@ .else mov \rp, #0 .endif - orr \rv, \rp, #0x42000000 - orr \rp, \rp, #dc21285_high + orr \rv, \rp, #dc21285_high + orr \rp, \rp, #0x42000000 .endm .macro senduart,rd,rx diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 38b95e949d1..63621f152c9 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -23,6 +23,8 @@ #include #include +#include + #include #include @@ -55,10 +57,12 @@ enum timer_location { #if defined(CONFIG_ARCH_QSD8X50) #define DGT_HZ (19200000 / 4) /* 19.2 MHz / 4 by default */ #define MSM_DGT_SHIFT (0) -#elif defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \ - defined(CONFIG_ARCH_MSM8960) +#elif defined(CONFIG_ARCH_MSM7X30) #define DGT_HZ (24576000 / 4) /* 24.576 MHz (LPXO) / 4 by default */ #define MSM_DGT_SHIFT (0) +#elif defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960) +#define DGT_HZ (27000000 / 4) /* 27 MHz (PXO) / 4 by default */ +#define MSM_DGT_SHIFT (0) #else #define DGT_HZ 19200000 /* 19.2 MHz or 600 KHz after shift */ #define MSM_DGT_SHIFT (5) @@ -100,7 +104,11 @@ static cycle_t msm_read_timer_count(struct clocksource *cs) { struct msm_clock *clk = container_of(cs, struct msm_clock, clocksource); - return readl(clk->global_counter); + /* + * Shift timer count down by a constant due to unreliable lower bits + * on some targets. + */ + return readl(clk->global_counter) >> clk->shift; } static struct msm_clock *clockevent_to_clock(struct clock_event_device *evt) diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c index 65157a35dbb..54add60f94c 100644 --- a/arch/arm/mach-mxs/ocotp.c +++ b/arch/arm/mach-mxs/ocotp.c @@ -16,6 +16,8 @@ #include #include +#include /* for cpu_relax() */ + #include #define OCOTP_WORD_OFFSET 0x20 diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index af98117043d..5b114d1558c 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -4,14 +4,14 @@ # Common support obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o -obj-y += clock.o clock_data.o opp_data.o reset.o +obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o obj-$(CONFIG_OMAP_32K_TIMER) += timer32k.o # Power Management -obj-$(CONFIG_PM) += pm.o sleep.o pm_bus.o +obj-$(CONFIG_PM) += pm.o sleep.o # DSP obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index d8559344c6e..f5a52204b89 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -284,14 +284,15 @@ static int __init omap1_system_dma_init(void) dma_base = ioremap(res[0].start, resource_size(&res[0])); if (!dma_base) { pr_err("%s: Unable to ioremap\n", __func__); - return -ENODEV; + ret = -ENODEV; + goto exit_device_put; } ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret) { dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n", __func__, pdev->name, pdev->id); - goto exit_device_del; + goto exit_device_put; } p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL); @@ -299,7 +300,7 @@ static int __init omap1_system_dma_init(void) dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n", __func__, pdev->name); ret = -ENOMEM; - goto exit_device_put; + goto exit_device_del; } d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL); @@ -380,10 +381,10 @@ exit_release_d: kfree(d); exit_release_p: kfree(p); -exit_device_put: - platform_device_put(pdev); exit_device_del: platform_device_del(pdev); +exit_device_put: + platform_device_put(pdev); return ret; } diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index fe31d933f0e..334fb8871bc 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -56,9 +56,13 @@ static struct dev_power_domain default_power_domain = { USE_PLATFORM_PM_SLEEP_OPS }, }; +#define OMAP1_PWR_DOMAIN (&default_power_domain) +#else +#define OMAP1_PWR_DOMAIN NULL +#endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = &default_power_domain, + .pwr_domain = OMAP1_PWR_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -72,4 +76,4 @@ static int __init omap1_pm_runtime_init(void) return 0; } core_initcall(omap1_pm_runtime_init); -#endif /* CONFIG_PM_RUNTIME */ + diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index d54969be0a5..5de6eac0a72 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -26,13 +26,13 @@ #include #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index ae2963a9804..5dac974be62 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -622,19 +622,19 @@ static struct omap_device_pad serial3_pads[] __initdata = { OMAP_MUX_MODE0), }; -static struct omap_board_data serial1_data = { +static struct omap_board_data serial1_data __initdata = { .id = 0, .pads = serial1_pads, .pads_cnt = ARRAY_SIZE(serial1_pads), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 73fa90bb695..63de2d396e2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -258,7 +258,7 @@ static struct gpio sdp4430_eth_gpios[] __initdata = { { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, }; -static int omap_ethernet_init(void) +static int __init omap_ethernet_init(void) { int status; @@ -322,6 +322,7 @@ static struct omap2_hsmmc_info mmc[] = { .gpio_wp = -EINVAL, .nonremovable = true, .ocr_mask = MMC_VDD_29_30, + .no_off_init = true, }, { .mmc = 1, @@ -681,19 +682,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -729,7 +730,7 @@ static void __init omap_4430sdp_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); omap_board_config = sdp4430_config; omap_board_config_size = ARRAY_SIZE(sdp4430_config); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f3beb8eeef7..b124bdfb423 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -27,13 +27,13 @@ #include #include #include +#include #include #include #include #include -#include #include #include #include diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c63115bc153..77456dec93e 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -63,8 +63,6 @@ #define SB_T35_SMSC911X_CS 4 #define SB_T35_SMSC911X_GPIO 65 -#define NAND_BLOCK_SIZE SZ_128K - #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include #include diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 08f08e81249..c3a9fd35034 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -48,6 +48,7 @@ #include "mux.h" #include "control.h" +#include "common-board-devices.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -177,7 +178,7 @@ static struct usbhs_omap_board_data cm_t3517_ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL, }; -static int cm_t3517_init_usbh(void) +static int __init cm_t3517_init_usbh(void) { int err; @@ -203,8 +204,6 @@ static inline int cm_t3517_init_usbh(void) #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition cm_t3517_nand_partitions[] = { { .name = "xloader", diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index cf520d7dd61..34956ec8329 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -61,8 +61,6 @@ #include "timer-gp.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index be71426359f..7f21d24bd43 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -54,8 +54,6 @@ #include "pm.h" #include "common-board-devices.h" -#define NAND_BLOCK_SIZE SZ_128K - /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -106,6 +104,9 @@ static void __init omap3_beagle_init_rev(void) beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); + gpio_free_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + switch (beagle_rev) { case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); @@ -579,6 +580,9 @@ static void __init omap3_beagle_init(void) omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions)); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal("sys_drm_msecure", OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1d10736c6d3..23f71d40883 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -41,7 +42,6 @@ #include #include -#include #include #include #include @@ -57,8 +57,6 @@ #define PANDORA_WIFI_NRESET_GPIO 23 #define OMAP3_PANDORA_TS_GPIO 94 -#define NAND_BLOCK_SIZE SZ_128K - static struct mtd_partition omap3pandora_nand_partitions[] = { { .name = "xloader", @@ -86,7 +84,8 @@ static struct mtd_partition omap3pandora_nand_partitions[] = { static struct omap_nand_platform_data pandora_nand_data = { .cs = 0, - .devsize = 1, /* '0' for 8-bit, '1' for 16-bit device */ + .devsize = NAND_BUSWIDTH_16, + .xfer_type = NAND_OMAP_PREFETCH_DMA, .parts = omap3pandora_nand_partitions, .nr_parts = ARRAY_SIZE(omap3pandora_nand_partitions), }; diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 82872d7d313..5f649faf737 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -56,8 +56,6 @@ #include -#define NAND_BLOCK_SIZE SZ_128K - #define OMAP3_AC_GPIO 136 #define OMAP3_TS_GPIO 162 #define TB_BL_PWM_TIMER 9 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 90485fced97..0cfe2005cb5 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -526,19 +526,19 @@ static struct omap_device_pad serial4_pads[] __initdata = { OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), }; -static struct omap_board_data serial2_data = { +static struct omap_board_data serial2_data __initdata = { .id = 1, .pads = serial2_pads, .pads_cnt = ARRAY_SIZE(serial2_pads), }; -static struct omap_board_data serial3_data = { +static struct omap_board_data serial3_data __initdata = { .id = 2, .pads = serial3_pads, .pads_cnt = ARRAY_SIZE(serial3_pads), }; -static struct omap_board_data serial4_data = { +static struct omap_board_data serial4_data __initdata = { .id = 3, .pads = serial4_pads, .pads_cnt = ARRAY_SIZE(serial4_pads), @@ -687,7 +687,7 @@ static void __init omap4_panda_init(void) if (omap_rev() == OMAP4430_REV_ES1_0) package = OMAP_PACKAGE_CBL; - omap4_mux_init(board_mux, package); + omap4_mux_init(board_mux, NULL, package); if (wl12xx_set_platform_data(&omap_panda_wlan_data)) pr_err("error setting wl12xx data\n"); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 1555918e3ff..175e1ab2b04 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include #include @@ -45,7 +46,6 @@ #include #include