dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

hwmon: Add driver for EXYNOS4 TMU 

This patch allows to read temperature
from TMU(Thermal Management Unit) of SAMSUNG EXYNOS4 series of SoC.

Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
This commit is contained in:
Donggeun Kim 2011-09-07 18:49:08 +09:00 committed by Guenter Roeck
parent 5cf231a346
commit 9d97e5c81e
5 changed files with 699 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

81
Documentation/hwmon/exynos4_tmu Normal file
View File

@ -0,0 +1,81 @@
Kernel driver exynos4_tmu
=================
Supported chips:
* ARM SAMSUNG EXYNOS4 series of SoC
Prefix: 'exynos4-tmu'
Datasheet: Not publicly available
Authors: Donggeun Kim <dg77.kim@samsung.com>
Description
-----------
This driver allows to read temperature inside SAMSUNG EXYNOS4 series of SoC.
The chip only exposes the measured 8-bit temperature code value
through a register.
Temperature can be taken from the temperature code.
There are three equations converting from temperature to temperature code.
The three equations are:
1. Two point trimming
Tc = (T - 25) * (TI2 - TI1) / (85 - 25) + TI1
2. One point trimming
Tc = T + TI1 - 25
3. No trimming
Tc = T + 50
Tc: Temperature code, T: Temperature,
TI1: Trimming info for 25 degree Celsius (stored at TRIMINFO register)
Temperature code measured at 25 degree Celsius which is unchanged
TI2: Trimming info for 85 degree Celsius (stored at TRIMINFO register)
Temperature code measured at 85 degree Celsius which is unchanged
TMU(Thermal Management Unit) in EXYNOS4 generates interrupt
when temperature exceeds pre-defined levels.
The maximum number of configurable threshold is four.
The threshold levels are defined as follows:
Level_0: current temperature > trigger_level_0 + threshold
Level_1: current temperature > trigger_level_1 + threshold
Level_2: current temperature > trigger_level_2 + threshold
Level_3: current temperature > trigger_level_3 + threshold
The threshold and each trigger_level are set
through the corresponding registers.
When an interrupt occurs, this driver notify user space of
one of four threshold levels for the interrupt
through kobject_uevent_env and sysfs_notify functions.
Although an interrupt condition for level_0 can be set,
it is not notified to user space through sysfs_notify function.
Sysfs Interface
---------------
name name of the temperature sensor
RO
temp1_input temperature
RO
temp1_max temperature for level_1 interrupt
RO
temp1_crit temperature for level_2 interrupt
RO
temp1_emergency temperature for level_3 interrupt
RO
temp1_max_alarm alarm for level_1 interrupt
RO
temp1_crit_alarm
alarm for level_2 interrupt
RO
temp1_emergency_alarm
alarm for level_3 interrupt
RO

10
drivers/hwmon/Kconfig
View File

@ -303,6 +303,16 @@ config SENSORS_DS1621
This driver can also be built as a module. If so, the module
will be called ds1621.
config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
depends on EXYNOS4_DEV_TMU
help
If you say yes here you get support for TMU (Thermal Managment
Unit) on SAMSUNG EXYNOS4 series of SoC.
This driver can also be built as a module. If so, the module
will be called exynos4-tmu.
config SENSORS_I5K_AMB
tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
depends on PCI && EXPERIMENTAL

1
drivers/hwmon/Makefile
View File

@ -47,6 +47,7 @@ obj-$(CONFIG_SENSORS_DS1621) += ds1621.o
obj-$(CONFIG_SENSORS_EMC1403) += emc1403.o
obj-$(CONFIG_SENSORS_EMC2103) += emc2103.o
obj-$(CONFIG_SENSORS_EMC6W201) += emc6w201.o
obj-$(CONFIG_SENSORS_EXYNOS4_TMU) += exynos4_tmu.o
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o

524
drivers/hwmon/exynos4_tmu.c Normal file
View File

@ -0,0 +1,524 @@
/*
* exynos4_tmu.c - Samsung EXYNOS4 TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <linux/workqueue.h>
#include <linux/sysfs.h>
#include <linux/kobject.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/platform_data/exynos4_tmu.h>
#define EXYNOS4_TMU_REG_TRIMINFO 0x0
#define EXYNOS4_TMU_REG_CONTROL 0x20
#define EXYNOS4_TMU_REG_STATUS 0x28
#define EXYNOS4_TMU_REG_CURRENT_TEMP 0x40
#define EXYNOS4_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4_TMU_REG_TRIG_LEVEL0 0x50
#define EXYNOS4_TMU_REG_TRIG_LEVEL1 0x54
#define EXYNOS4_TMU_REG_TRIG_LEVEL2 0x58
#define EXYNOS4_TMU_REG_TRIG_LEVEL3 0x5C
#define EXYNOS4_TMU_REG_PAST_TEMP0 0x60
#define EXYNOS4_TMU_REG_PAST_TEMP1 0x64
#define EXYNOS4_TMU_REG_PAST_TEMP2 0x68
#define EXYNOS4_TMU_REG_PAST_TEMP3 0x6C
#define EXYNOS4_TMU_REG_INTEN 0x70
#define EXYNOS4_TMU_REG_INTSTAT 0x74
#define EXYNOS4_TMU_REG_INTCLEAR 0x78
#define EXYNOS4_TMU_GAIN_SHIFT 8
#define EXYNOS4_TMU_REF_VOLTAGE_SHIFT 24
#define EXYNOS4_TMU_TRIM_TEMP_MASK 0xff
#define EXYNOS4_TMU_CORE_ON 3
#define EXYNOS4_TMU_CORE_OFF 2
#define EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET 50
#define EXYNOS4_TMU_TRIG_LEVEL0_MASK 0x1
#define EXYNOS4_TMU_TRIG_LEVEL1_MASK 0x10
#define EXYNOS4_TMU_TRIG_LEVEL2_MASK 0x100
#define EXYNOS4_TMU_TRIG_LEVEL3_MASK 0x1000
#define EXYNOS4_TMU_INTCLEAR_VAL 0x1111
struct exynos4_tmu_data {
struct exynos4_tmu_platform_data *pdata;
struct device *hwmon_dev;
struct resource *mem;
void __iomem *base;
int irq;
struct work_struct irq_work;
struct mutex lock;
struct clk *clk;
u8 temp_error1, temp_error2;
};
/*
* TMU treats temperature as a mapped temperature code.
* The temperature is converted differently depending on the calibration type.
*/
static int temp_to_code(struct exynos4_tmu_data *data, u8 temp)
{
struct exynos4_tmu_platform_data *pdata = data->pdata;
int temp_code;
/* temp should range between 25 and 125 */
if (temp < 25 || temp > 125) {
temp_code = -EINVAL;
goto out;
}
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - 25) *
(data->temp_error2 - data->temp_error1) /
(85 - 25) + data->temp_error1;
break;
case TYPE_ONE_POINT_TRIMMING:
temp_code = temp + data->temp_error1 - 25;
break;
default:
temp_code = temp + EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
break;
}
out:
return temp_code;
}
/*
* Calculate a temperature value from a temperature code.
* The unit of the temperature is degree Celsius.
*/
static int code_to_temp(struct exynos4_tmu_data *data, u8 temp_code)
{
struct exynos4_tmu_platform_data *pdata = data->pdata;
int temp;
/* temp_code should range between 75 and 175 */
if (temp_code < 75 || temp_code > 175) {
temp = -ENODATA;
goto out;
}
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) * (85 - 25) /
(data->temp_error2 - data->temp_error1) + 25;
break;
case TYPE_ONE_POINT_TRIMMING:
temp = temp_code - data->temp_error1 + 25;
break;
default:
temp = temp_code - EXYNOS4_TMU_DEF_CODE_TO_TEMP_OFFSET;
break;
}
out:
return temp;
}
static int exynos4_tmu_initialize(struct platform_device *pdev)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
unsigned int status, trim_info;
int ret = 0, threshold_code;
mutex_lock(&data->lock);
clk_enable(data->clk);
status = readb(data->base + EXYNOS4_TMU_REG_STATUS);
if (!status) {
ret = -EBUSY;
goto out;
}
/* Save trimming info in order to perform calibration */
trim_info = readl(data->base + EXYNOS4_TMU_REG_TRIMINFO);
data->temp_error1 = trim_info & EXYNOS4_TMU_TRIM_TEMP_MASK;
data->temp_error2 = ((trim_info >> 8) & EXYNOS4_TMU_TRIM_TEMP_MASK);
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
if (threshold_code < 0) {
ret = threshold_code;
goto out;
}
writeb(threshold_code,
data->base + EXYNOS4_TMU_REG_THRESHOLD_TEMP);
writeb(pdata->trigger_levels[0],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL0);
writeb(pdata->trigger_levels[1],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL1);
writeb(pdata->trigger_levels[2],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL2);
writeb(pdata->trigger_levels[3],
data->base + EXYNOS4_TMU_REG_TRIG_LEVEL3);
writel(EXYNOS4_TMU_INTCLEAR_VAL,
data->base + EXYNOS4_TMU_REG_INTCLEAR);
out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
return ret;
}
static void exynos4_tmu_control(struct platform_device *pdev, bool on)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
con = pdata->reference_voltage << EXYNOS4_TMU_REF_VOLTAGE_SHIFT |
pdata->gain << EXYNOS4_TMU_GAIN_SHIFT;
if (on) {
con |= EXYNOS4_TMU_CORE_ON;
interrupt_en = pdata->trigger_level3_en << 12 |
pdata->trigger_level2_en << 8 |
pdata->trigger_level1_en << 4 |
pdata->trigger_level0_en;
} else {
con |= EXYNOS4_TMU_CORE_OFF;
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + EXYNOS4_TMU_REG_INTEN);
writel(con, data->base + EXYNOS4_TMU_REG_CONTROL);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
static int exynos4_tmu_read(struct exynos4_tmu_data *data)
{
u8 temp_code;
int temp;
mutex_lock(&data->lock);
clk_enable(data->clk);
temp_code = readb(data->base + EXYNOS4_TMU_REG_CURRENT_TEMP);
temp = code_to_temp(data, temp_code);
clk_disable(data->clk);
mutex_unlock(&data->lock);
return temp;
}
static void exynos4_tmu_work(struct work_struct *work)
{
struct exynos4_tmu_data *data = container_of(work,
struct exynos4_tmu_data, irq_work);
mutex_lock(&data->lock);
clk_enable(data->clk);
writel(EXYNOS4_TMU_INTCLEAR_VAL, data->base + EXYNOS4_TMU_REG_INTCLEAR);
kobject_uevent(&data->hwmon_dev->kobj, KOBJ_CHANGE);
enable_irq(data->irq);
clk_disable(data->clk);
mutex_unlock(&data->lock);
}
static irqreturn_t exynos4_tmu_irq(int irq, void *id)
{
struct exynos4_tmu_data *data = id;
disable_irq_nosync(irq);
schedule_work(&data->irq_work);
return IRQ_HANDLED;
}
static ssize_t exynos4_tmu_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "exynos4-tmu\n");
}
static ssize_t exynos4_tmu_show_temp(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
int ret;
ret = exynos4_tmu_read(data);
if (ret < 0)
return ret;
/* convert from degree Celsius to millidegree Celsius */
return sprintf(buf, "%d\n", ret * 1000);
}
static ssize_t exynos4_tmu_show_alarm(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
int temp;
unsigned int trigger_level;
temp = exynos4_tmu_read(data);
if (temp < 0)
return temp;
trigger_level = pdata->threshold + pdata->trigger_levels[attr->index];
return sprintf(buf, "%d\n", !!(temp > trigger_level));
}
static ssize_t exynos4_tmu_show_level(struct device *dev,
struct device_attribute *devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct exynos4_tmu_data *data = dev_get_drvdata(dev);
struct exynos4_tmu_platform_data *pdata = data->pdata;
unsigned int temp = pdata->threshold +
pdata->trigger_levels[attr->index];
return sprintf(buf, "%u\n", temp * 1000);
}
static DEVICE_ATTR(name, S_IRUGO, exynos4_tmu_show_name, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, exynos4_tmu_show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO,
exynos4_tmu_show_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO, exynos4_tmu_show_level, NULL, 1);
static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, exynos4_tmu_show_level, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_emergency, S_IRUGO,
exynos4_tmu_show_level, NULL, 3);
static struct attribute *exynos4_tmu_attributes[] = {
&dev_attr_name.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_emergency.dev_attr.attr,
NULL,
};
static const struct attribute_group exynos4_tmu_attr_group = {
.attrs = exynos4_tmu_attributes,
};
static int __devinit exynos4_tmu_probe(struct platform_device *pdev)
{
struct exynos4_tmu_data *data;
struct exynos4_tmu_platform_data *pdata = pdev->dev.platform_data;
int ret;
if (!pdata) {
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
}
data = kzalloc(sizeof(struct exynos4_tmu_data), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev, "Failed to allocate driver structure\n");
return -ENOMEM;
}
data->irq = platform_get_irq(pdev, 0);
if (data->irq < 0) {
ret = data->irq;
dev_err(&pdev->dev, "Failed to get platform irq\n");
goto err_free;
}
INIT_WORK(&data->irq_work, exynos4_tmu_work);
data->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!data->mem) {
ret = -ENOENT;
dev_err(&pdev->dev, "Failed to get platform resource\n");
goto err_free;
}
data->mem = request_mem_region(data->mem->start,
resource_size(data->mem), pdev->name);
if (!data->mem) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to request memory region\n");
goto err_free;
}
data->base = ioremap(data->mem->start, resource_size(data->mem));
if (!data->base) {
ret = -ENODEV;
dev_err(&pdev->dev, "Failed to ioremap memory\n");
goto err_mem_region;
}
ret = request_irq(data->irq, exynos4_tmu_irq,
IRQF_DISABLED | IRQF_TRIGGER_RISING,
"exynos4-tmu", data);
if (ret) {
dev_err(&pdev->dev, "Failed to request irq: %d\n", data->irq);
goto err_io_remap;
}
data->clk = clk_get(NULL, "tmu_apbif");
if (IS_ERR(data->clk)) {
ret = PTR_ERR(data->clk);
dev_err(&pdev->dev, "Failed to get clock\n");
goto err_irq;
}
data->pdata = pdata;
platform_set_drvdata(pdev, data);
mutex_init(&data->lock);
ret = exynos4_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
goto err_clk;
}
ret = sysfs_create_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
if (ret) {
dev_err(&pdev->dev, "Failed to create sysfs group\n");
goto err_clk;
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Failed to register hwmon device\n");
goto err_create_group;
}
exynos4_tmu_control(pdev, true);
return 0;
err_create_group:
sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
err_clk:
platform_set_drvdata(pdev, NULL);
clk_put(data->clk);
err_irq:
free_irq(data->irq, data);
err_io_remap:
iounmap(data->base);
err_mem_region:
release_mem_region(data->mem->start, resource_size(data->mem));
err_free:
kfree(data);
return ret;
}
static int __devexit exynos4_tmu_remove(struct platform_device *pdev)
{
struct exynos4_tmu_data *data = platform_get_drvdata(pdev);
exynos4_tmu_control(pdev, false);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&pdev->dev.kobj, &exynos4_tmu_attr_group);
clk_put(data->clk);
free_irq(data->irq, data);
iounmap(data->base);
release_mem_region(data->mem->start, resource_size(data->mem));
platform_set_drvdata(pdev, NULL);
kfree(data);
return 0;
}
#ifdef CONFIG_PM
static int exynos4_tmu_suspend(struct platform_device *pdev, pm_message_t state)
{
exynos4_tmu_control(pdev, false);
return 0;
}
static int exynos4_tmu_resume(struct platform_device *pdev)
{
exynos4_tmu_initialize(pdev);
exynos4_tmu_control(pdev, true);
return 0;
}
#else
#define exynos4_tmu_suspend NULL
#define exynos4_tmu_resume NULL
#endif
static struct platform_driver exynos4_tmu_driver = {
.driver = {
.name = "exynos4-tmu",
.owner = THIS_MODULE,
},
.probe = exynos4_tmu_probe,
.remove = __devexit_p(exynos4_tmu_remove),
.suspend = exynos4_tmu_suspend,
.resume = exynos4_tmu_resume,
};
static int __init exynos4_tmu_driver_init(void)
{
return platform_driver_register(&exynos4_tmu_driver);
}
module_init(exynos4_tmu_driver_init);
static void __exit exynos4_tmu_driver_exit(void)
{
platform_driver_unregister(&exynos4_tmu_driver);
}
module_exit(exynos4_tmu_driver_exit);
MODULE_DESCRIPTION("EXYNOS4 TMU Driver");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:exynos4-tmu");

83
include/linux/platform_data/exynos4_tmu.h Normal file
View File

@ -0,0 +1,83 @@
/*
* exynos4_tmu.h - Samsung EXYNOS4 TMU (Thermal Management Unit)
*
* Copyright (C) 2011 Samsung Electronics
* Donggeun Kim <dg77.kim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _LINUX_EXYNOS4_TMU_H
#define _LINUX_EXYNOS4_TMU_H
enum calibration_type {
TYPE_ONE_POINT_TRIMMING,
TYPE_TWO_POINT_TRIMMING,
TYPE_NONE,
};
/**
* struct exynos4_tmu_platform_data
* @threshold: basic temperature for generating interrupt
* 25 <= threshold <= 125 [unit: degree Celsius]
* @trigger_levels: array for each interrupt levels
* [unit: degree Celsius]
* 0: temperature for trigger_level0 interrupt
* condition for trigger_level0 interrupt:
* current temperature > threshold + trigger_levels[0]
* 1: temperature for trigger_level1 interrupt
* condition for trigger_level1 interrupt:
* current temperature > threshold + trigger_levels[1]
* 2: temperature for trigger_level2 interrupt
* condition for trigger_level2 interrupt:
* current temperature > threshold + trigger_levels[2]
* 3: temperature for trigger_level3 interrupt
* condition for trigger_level3 interrupt:
* current temperature > threshold + trigger_levels[3]
* @trigger_level0_en:
* 1 = enable trigger_level0 interrupt,
* 0 = disable trigger_level0 interrupt
* @trigger_level1_en:
* 1 = enable trigger_level1 interrupt,
* 0 = disable trigger_level1 interrupt
* @trigger_level2_en:
* 1 = enable trigger_level2 interrupt,
* 0 = disable trigger_level2 interrupt
* @trigger_level3_en:
* 1 = enable trigger_level3 interrupt,
* 0 = disable trigger_level3 interrupt
* @gain: gain of amplifier in the positive-TC generator block
* 0 <= gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
* 0 <= reference_voltage <= 31
* @cal_type: calibration type for temperature
*
* This structure is required for configuration of exynos4_tmu driver.
*/
struct exynos4_tmu_platform_data {
u8 threshold;
u8 trigger_levels[4];
bool trigger_level0_en;
bool trigger_level1_en;
bool trigger_level2_en;
bool trigger_level3_en;
u8 gain;
u8 reference_voltage;
enum calibration_type cal_type;
};
#endif /* _LINUX_EXYNOS4_TMU_H */