CRIS v32: Update kernel/head.S
- Shorten include paths for machine specific header files. - Add magic for booting NAND flash. - Change CONFIG_ETRAXFS_SIM to CONFIG_ETRAX_VCS_SIM. - Use assembler macros for initializing hardware (clocks) - Add stubs for SMP slave CPUs. - Search for cramfs or jffs2 if no romfs found. - Initialize l2cache.
This commit is contained in:
parent
ec87ee20c2
commit
96e476697d
|
@ -4,22 +4,25 @@
|
||||||
* Copyright (C) 2003, Axis Communications AB
|
* Copyright (C) 2003, Axis Communications AB
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
|
||||||
#define ASSEMBLER_MACROS_ONLY
|
#define ASSEMBLER_MACROS_ONLY
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* The macros found in mmu_defs_asm.h uses the ## concatenation operator, so
|
* The macros found in mmu_defs_asm.h uses the ## concatenation operator, so
|
||||||
* -traditional must not be used when assembling this file.
|
* -traditional must not be used when assembling this file.
|
||||||
*/
|
*/
|
||||||
#include <asm/arch/hwregs/reg_rdwr.h>
|
#include <hwregs/reg_rdwr.h>
|
||||||
#include <asm/arch/hwregs/asm/mmu_defs_asm.h>
|
#include <asm/arch/memmap.h>
|
||||||
#include <asm/arch/hwregs/asm/reg_map_asm.h>
|
#include <hwregs/intr_vect.h>
|
||||||
#include <asm/arch/hwregs/asm/config_defs_asm.h>
|
#include <hwregs/asm/mmu_defs_asm.h>
|
||||||
#include <asm/arch/hwregs/asm/bif_core_defs_asm.h>
|
#include <hwregs/asm/reg_map_asm.h>
|
||||||
|
#include <asm/arch/mach/startup.inc>
|
||||||
|
|
||||||
#define CRAMFS_MAGIC 0x28cd3d45
|
#define CRAMFS_MAGIC 0x28cd3d45
|
||||||
|
#define JHEAD_MAGIC 0x1FF528A6
|
||||||
|
#define JHEAD_SIZE 8
|
||||||
#define RAM_INIT_MAGIC 0x56902387
|
#define RAM_INIT_MAGIC 0x56902387
|
||||||
#define COMMAND_LINE_MAGIC 0x87109563
|
#define COMMAND_LINE_MAGIC 0x87109563
|
||||||
|
#define NAND_BOOT_MAGIC 0x9a9db001
|
||||||
|
|
||||||
;; NOTE: R8 and R9 carry information from the decompressor (if the
|
;; NOTE: R8 and R9 carry information from the decompressor (if the
|
||||||
;; kernel was compressed). They must not be used in the code below
|
;; kernel was compressed). They must not be used in the code below
|
||||||
|
@ -30,12 +33,11 @@
|
||||||
.global romfs_start
|
.global romfs_start
|
||||||
.global romfs_length
|
.global romfs_length
|
||||||
.global romfs_in_flash
|
.global romfs_in_flash
|
||||||
|
.global nand_boot
|
||||||
.global swapper_pg_dir
|
.global swapper_pg_dir
|
||||||
.global crisv32_nand_boot
|
|
||||||
.global crisv32_nand_cramfs_offset
|
|
||||||
|
|
||||||
;; Dummy section to make it bootable with current VCS simulator
|
;; Dummy section to make it bootable with current VCS simulator
|
||||||
#ifdef CONFIG_ETRAXFS_SIM
|
#ifdef CONFIG_ETRAX_VCS_SIM
|
||||||
.section ".boot", "ax"
|
.section ".boot", "ax"
|
||||||
ba tstart
|
ba tstart
|
||||||
nop
|
nop
|
||||||
|
@ -51,33 +53,13 @@ tstart:
|
||||||
;;
|
;;
|
||||||
di
|
di
|
||||||
|
|
||||||
;; Start clocks for used blocks.
|
START_CLOCKS
|
||||||
move.d REG_ADDR(config, regi_config, rw_clk_ctrl), $r1
|
|
||||||
move.d [$r1], $r0
|
|
||||||
or.d REG_STATE(config, rw_clk_ctrl, cpu, yes) | \
|
|
||||||
REG_STATE(config, rw_clk_ctrl, bif, yes) | \
|
|
||||||
REG_STATE(config, rw_clk_ctrl, fix_io, yes), $r0
|
|
||||||
move.d $r0, [$r1]
|
|
||||||
|
|
||||||
;; Set up waitstates etc
|
SETUP_WAIT_STATES
|
||||||
move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r0
|
|
||||||
move.d CONFIG_ETRAX_MEM_GRP1_CONFIG, $r1
|
|
||||||
move.d $r1, [$r0]
|
|
||||||
move.d REG_ADDR(bif_core, regi_bif_core, rw_grp2_cfg), $r0
|
|
||||||
move.d CONFIG_ETRAX_MEM_GRP2_CONFIG, $r1
|
|
||||||
move.d $r1, [$r0]
|
|
||||||
move.d REG_ADDR(bif_core, regi_bif_core, rw_grp3_cfg), $r0
|
|
||||||
move.d CONFIG_ETRAX_MEM_GRP3_CONFIG, $r1
|
|
||||||
move.d $r1, [$r0]
|
|
||||||
move.d REG_ADDR(bif_core, regi_bif_core, rw_grp4_cfg), $r0
|
|
||||||
move.d CONFIG_ETRAX_MEM_GRP4_CONFIG, $r1
|
|
||||||
move.d $r1, [$r0]
|
|
||||||
|
|
||||||
#ifdef CONFIG_ETRAXFS_SIM
|
#ifdef CONFIG_SMP
|
||||||
;; Set up minimal flash waitstates
|
secondary_cpu_entry: /* Entry point for secondary CPUs */
|
||||||
move.d 0, $r10
|
di
|
||||||
move.d REG_ADDR(bif_core, regi_bif_core, rw_grp1_cfg), $r11
|
|
||||||
move.d $r10, [$r11]
|
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
;; Setup and enable the MMU. Use same configuration for both the data
|
;; Setup and enable the MMU. Use same configuration for both the data
|
||||||
|
@ -85,7 +67,7 @@ tstart:
|
||||||
;;
|
;;
|
||||||
;; Note; 3 cycles is needed for a bank-select to take effect. Further;
|
;; Note; 3 cycles is needed for a bank-select to take effect. Further;
|
||||||
;; bank 1 is the instruction MMU, bank 2 is the data MMU.
|
;; bank 1 is the instruction MMU, bank 2 is the data MMU.
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
|
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
|
||||||
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
|
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
|
||||||
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
|
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb), $r0
|
||||||
|
@ -93,7 +75,7 @@ tstart:
|
||||||
;; Map the virtual DRAM to the RW eprom area at address 0.
|
;; Map the virtual DRAM to the RW eprom area at address 0.
|
||||||
;; Also map 0xa for the hook calls,
|
;; Also map 0xa for the hook calls,
|
||||||
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
|
move.d REG_FIELD(mmu, rw_mm_kbase_hi, base_e, 8) \
|
||||||
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 0) \
|
| REG_FIELD(mmu, rw_mm_kbase_hi, base_c, 4) \
|
||||||
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \
|
| REG_FIELD(mmu, rw_mm_kbase_hi, base_b, 0xb) \
|
||||||
| REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
|
| REG_FIELD(mmu, rw_mm_kbase_hi, base_a, 0xa), $r0
|
||||||
#endif
|
#endif
|
||||||
|
@ -104,7 +86,7 @@ tstart:
|
||||||
|
|
||||||
;; Enable certain page protections and setup linear mapping
|
;; Enable certain page protections and setup linear mapping
|
||||||
;; for f,e,c,b,4,0.
|
;; for f,e,c,b,4,0.
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
|
move.d REG_STATE(mmu, rw_mm_cfg, we, on) \
|
||||||
| REG_STATE(mmu, rw_mm_cfg, acc, on) \
|
| REG_STATE(mmu, rw_mm_cfg, acc, on) \
|
||||||
| REG_STATE(mmu, rw_mm_cfg, ex, on) \
|
| REG_STATE(mmu, rw_mm_cfg, ex, on) \
|
||||||
|
@ -183,17 +165,11 @@ tstart:
|
||||||
nop
|
nop
|
||||||
nop
|
nop
|
||||||
nop
|
nop
|
||||||
move $s10, $r0
|
move $s12, $r0
|
||||||
cmpq 0, $r0
|
cmpq 0, $r0
|
||||||
beq master_cpu
|
beq master_cpu
|
||||||
nop
|
nop
|
||||||
slave_cpu:
|
slave_cpu:
|
||||||
; A slave waits for cpu_now_booting to be equal to CPU ID.
|
|
||||||
move.d cpu_now_booting, $r1
|
|
||||||
slave_wait:
|
|
||||||
cmp.d [$r1], $r0
|
|
||||||
bne slave_wait
|
|
||||||
nop
|
|
||||||
; Time to boot-up. Get stack location provided by master CPU.
|
; Time to boot-up. Get stack location provided by master CPU.
|
||||||
move.d smp_init_current_idle_thread, $r1
|
move.d smp_init_current_idle_thread, $r1
|
||||||
move.d [$r1], $sp
|
move.d [$r1], $sp
|
||||||
|
@ -203,9 +179,16 @@ slave_wait:
|
||||||
jsr smp_callin
|
jsr smp_callin
|
||||||
nop
|
nop
|
||||||
master_cpu:
|
master_cpu:
|
||||||
|
/* Set up entry point for secondary CPUs. The boot ROM has set up
|
||||||
|
* EBP at start of internal memory. The CPU will get there
|
||||||
|
* later when we issue an IPI to them... */
|
||||||
|
move.d MEM_INTMEM_START + IPI_INTR_VECT * 4, $r0
|
||||||
|
move.d secondary_cpu_entry, $r1
|
||||||
|
move.d $r1, [$r0]
|
||||||
#endif
|
#endif
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
;; Check if starting from DRAM or flash.
|
; Check if starting from DRAM (network->RAM boot or unpacked
|
||||||
|
; compressed kernel), or directly from flash.
|
||||||
lapcq ., $r0
|
lapcq ., $r0
|
||||||
and.d 0x7fffffff, $r0 ; Mask off the non-cache bit.
|
and.d 0x7fffffff, $r0 ; Mask off the non-cache bit.
|
||||||
cmp.d 0x10000, $r0 ; Arbitrary, something above this code.
|
cmp.d 0x10000, $r0 ; Arbitrary, something above this code.
|
||||||
|
@ -232,12 +215,13 @@ _inflash:
|
||||||
beq _dram_initialized
|
beq _dram_initialized
|
||||||
nop
|
nop
|
||||||
|
|
||||||
#include "../lib/dram_init.S"
|
#include "../mach/dram_init.S"
|
||||||
|
|
||||||
_dram_initialized:
|
_dram_initialized:
|
||||||
;; Copy the text and data section to DRAM. This depends on that the
|
;; Copy the text and data section to DRAM. This depends on that the
|
||||||
;; variables used below are correctly set up by the linker script.
|
;; variables used below are correctly set up by the linker script.
|
||||||
;; The calculated value stored in R4 is used below.
|
;; The calculated value stored in R4 is used below.
|
||||||
|
;; Leave the cramfs file system (piggybacked after the kernel) in flash.
|
||||||
moveq 0, $r0 ; Source.
|
moveq 0, $r0 ; Source.
|
||||||
move.d text_start, $r1 ; Destination.
|
move.d text_start, $r1 ; Destination.
|
||||||
move.d __vmlinux_end, $r2
|
move.d __vmlinux_end, $r2
|
||||||
|
@ -249,7 +233,7 @@ _dram_initialized:
|
||||||
blo 1b
|
blo 1b
|
||||||
nop
|
nop
|
||||||
|
|
||||||
;; Keep CRAMFS in flash.
|
;; Check for cramfs.
|
||||||
moveq 0, $r0
|
moveq 0, $r0
|
||||||
move.d romfs_length, $r1
|
move.d romfs_length, $r1
|
||||||
move.d $r0, [$r1]
|
move.d $r0, [$r1]
|
||||||
|
@ -258,6 +242,7 @@ _dram_initialized:
|
||||||
bne 1f
|
bne 1f
|
||||||
nop
|
nop
|
||||||
|
|
||||||
|
;; Set length and start of cramfs, set romfs_in_flash flag
|
||||||
addoq +4, $r4, $acr
|
addoq +4, $r4, $acr
|
||||||
move.d [$acr], $r0
|
move.d [$acr], $r0
|
||||||
move.d romfs_length, $r1
|
move.d romfs_length, $r1
|
||||||
|
@ -273,35 +258,32 @@ _dram_initialized:
|
||||||
nop
|
nop
|
||||||
|
|
||||||
_inram:
|
_inram:
|
||||||
;; Check if booting from NAND flash (in that case we just remember the offset
|
;; Check if booting from NAND flash; if so, set appropriate flags
|
||||||
;; into the flash where cramfs should be).
|
;; and move on.
|
||||||
move.d REG_ADDR(config, regi_config, r_bootsel), $r0
|
cmp.d NAND_BOOT_MAGIC, $r12
|
||||||
move.d [$r0], $r0
|
bne move_cramfs ; not nand, jump
|
||||||
and.d REG_MASK(config, r_bootsel, boot_mode), $r0
|
|
||||||
cmp.d REG_STATE(config, r_bootsel, boot_mode, nand), $r0
|
|
||||||
bne move_cramfs
|
|
||||||
moveq 1,$r0
|
|
||||||
move.d crisv32_nand_boot, $r1
|
|
||||||
move.d $r0, [$r1]
|
|
||||||
move.d crisv32_nand_cramfs_offset, $r1
|
|
||||||
move.d $r9, [$r1]
|
|
||||||
moveq 1, $r0
|
moveq 1, $r0
|
||||||
move.d romfs_in_flash, $r1
|
move.d nand_boot, $r1 ; tell axisflashmap we're booting from NAND
|
||||||
move.d $r0, [$r1]
|
move.d $r0, [$r1]
|
||||||
jump _start_it
|
moveq 0, $r0 ; tell axisflashmap romfs is not in
|
||||||
|
move.d romfs_in_flash, $r1 ; (directly accessed) flash
|
||||||
|
move.d $r0, [$r1]
|
||||||
|
jump _start_it ; continue with boot
|
||||||
nop
|
nop
|
||||||
|
|
||||||
move_cramfs:
|
move_cramfs:
|
||||||
;; Move the cramfs after BSS.
|
;; kernel is in DRAM.
|
||||||
|
;; Must figure out if there is a piggybacked rootfs image or not.
|
||||||
|
;; Set romfs_length to 0 => no rootfs image available by default.
|
||||||
moveq 0, $r0
|
moveq 0, $r0
|
||||||
move.d romfs_length, $r1
|
move.d romfs_length, $r1
|
||||||
move.d $r0, [$r1]
|
move.d $r0, [$r1]
|
||||||
|
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
;; The kernel could have been unpacked to DRAM by the loader, but
|
;; The kernel could have been unpacked to DRAM by the loader, but
|
||||||
;; the cramfs image could still be inte the flash immediately
|
;; the cramfs image could still be in the flash immediately
|
||||||
;; following the compressed kernel image. The loaded passes the address
|
;; following the compressed kernel image. The loader passes the address
|
||||||
;; of the bute succeeding the last compressed byte in the flash in
|
;; of the byte succeeding the last compressed byte in the flash in
|
||||||
;; register R9 when starting the kernel.
|
;; register R9 when starting the kernel.
|
||||||
cmp.d 0x0ffffff8, $r9
|
cmp.d 0x0ffffff8, $r9
|
||||||
bhs _no_romfs_in_flash ; R9 points outside the flash area.
|
bhs _no_romfs_in_flash ; R9 points outside the flash area.
|
||||||
|
@ -310,11 +292,13 @@ move_cramfs:
|
||||||
ba _no_romfs_in_flash
|
ba _no_romfs_in_flash
|
||||||
nop
|
nop
|
||||||
#endif
|
#endif
|
||||||
|
;; cramfs rootfs might to be in flash. Check for it.
|
||||||
move.d [$r9], $r0 ; cramfs_super.magic
|
move.d [$r9], $r0 ; cramfs_super.magic
|
||||||
cmp.d CRAMFS_MAGIC, $r0
|
cmp.d CRAMFS_MAGIC, $r0
|
||||||
bne _no_romfs_in_flash
|
bne _no_romfs_in_flash
|
||||||
nop
|
nop
|
||||||
|
|
||||||
|
;; found cramfs in flash. set address and size, and romfs_in_flash flag.
|
||||||
addoq +4, $r9, $acr
|
addoq +4, $r9, $acr
|
||||||
move.d [$acr], $r0
|
move.d [$acr], $r0
|
||||||
move.d romfs_length, $r1
|
move.d romfs_length, $r1
|
||||||
|
@ -330,27 +314,43 @@ move_cramfs:
|
||||||
nop
|
nop
|
||||||
|
|
||||||
_no_romfs_in_flash:
|
_no_romfs_in_flash:
|
||||||
;; Look for cramfs.
|
;; No romfs in flash, so look for cramfs, or jffs2 with jhead,
|
||||||
|
;; after kernel in RAM, as is the case with network->RAM boot.
|
||||||
|
;; For cramfs, partition starts with magic and length.
|
||||||
|
;; For jffs2, a jhead is prepended which contains with magic and length.
|
||||||
|
;; The jhead is not part of the jffs2 partition however.
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAXFS_SIM
|
||||||
move.d __vmlinux_end, $r0
|
move.d __vmlinux_end, $r0
|
||||||
#else
|
#else
|
||||||
move.d __end, $r0
|
move.d __end, $r0
|
||||||
#endif
|
#endif
|
||||||
move.d [$r0], $r1
|
move.d [$r0], $r1
|
||||||
cmp.d CRAMFS_MAGIC, $r1
|
cmp.d CRAMFS_MAGIC, $r1 ; cramfs magic?
|
||||||
bne 2f
|
beq 2f ; yes, jump
|
||||||
nop
|
nop
|
||||||
|
cmp.d JHEAD_MAGIC, $r1 ; jffs2 (jhead) magic?
|
||||||
|
bne 4f ; no, skip copy
|
||||||
|
nop
|
||||||
|
addq 4, $r0 ; location of jffs2 size
|
||||||
|
move.d [$r0+], $r2 ; fetch jffs2 size -> r2
|
||||||
|
; r0 now points to start of jffs2
|
||||||
|
ba 3f
|
||||||
|
nop
|
||||||
|
2:
|
||||||
|
addoq +4, $r0, $acr ; location of cramfs size
|
||||||
|
move.d [$acr], $r2 ; fetch cramfs size -> r2
|
||||||
|
; r0 still points to start of cramfs
|
||||||
|
3:
|
||||||
|
;; Now, move the root fs to after kernel's BSS
|
||||||
|
|
||||||
addoq +4, $r0, $acr
|
move.d _end, $r1 ; start of cramfs -> r1
|
||||||
move.d [$acr], $r2
|
|
||||||
move.d _end, $r1
|
|
||||||
move.d romfs_start, $r3
|
move.d romfs_start, $r3
|
||||||
move.d $r1, [$r3]
|
move.d $r1, [$r3] ; store at romfs_start (for axisflashmap)
|
||||||
move.d romfs_length, $r3
|
move.d romfs_length, $r3
|
||||||
move.d $r2, [$r3]
|
move.d $r2, [$r3] ; store size at romfs_length
|
||||||
|
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
add.d $r2, $r0
|
add.d $r2, $r0 ; copy from end and downwards
|
||||||
add.d $r2, $r1
|
add.d $r2, $r1
|
||||||
|
|
||||||
lsrq 1, $r2 ; Size is in bytes, we copy words.
|
lsrq 1, $r2 ; Size is in bytes, we copy words.
|
||||||
|
@ -365,10 +365,17 @@ _no_romfs_in_flash:
|
||||||
nop
|
nop
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
2:
|
4:
|
||||||
|
;; BSS move done.
|
||||||
|
;; Clear romfs_in_flash flag, as we now know romfs is in DRAM
|
||||||
|
;; Also clear nand_boot flag; if we got here, we know we've not
|
||||||
|
;; booted from NAND flash.
|
||||||
moveq 0, $r0
|
moveq 0, $r0
|
||||||
move.d romfs_in_flash, $r1
|
move.d romfs_in_flash, $r1
|
||||||
move.d $r0, [$r1]
|
move.d $r0, [$r1]
|
||||||
|
moveq 0, $r0
|
||||||
|
move.d nand_boot, $r1
|
||||||
|
move.d $r0, [$r1]
|
||||||
|
|
||||||
jump _start_it ; Jump to cached code.
|
jump _start_it ; Jump to cached code.
|
||||||
nop
|
nop
|
||||||
|
@ -384,8 +391,8 @@ _start_it:
|
||||||
move.d cris_command_line, $r10
|
move.d cris_command_line, $r10
|
||||||
or.d 0x80000000, $r11 ; Make it virtual
|
or.d 0x80000000, $r11 ; Make it virtual
|
||||||
1:
|
1:
|
||||||
move.b [$r11+], $r12
|
move.b [$r11+], $r1
|
||||||
move.b $r12, [$r10+]
|
move.b $r1, [$r10+]
|
||||||
subq 1, $r13
|
subq 1, $r13
|
||||||
bne 1b
|
bne 1b
|
||||||
nop
|
nop
|
||||||
|
@ -401,7 +408,7 @@ no_command_line:
|
||||||
move.d etrax_irv, $r1 ; Set the exception base register and pointer.
|
move.d etrax_irv, $r1 ; Set the exception base register and pointer.
|
||||||
move.d $r0, [$r1]
|
move.d $r0, [$r1]
|
||||||
|
|
||||||
#ifndef CONFIG_ETRAXFS_SIM
|
#ifndef CONFIG_ETRAX_VCS_SIM
|
||||||
;; Clear the BSS region from _bss_start to _end.
|
;; Clear the BSS region from _bss_start to _end.
|
||||||
move.d __bss_start, $r0
|
move.d __bss_start, $r0
|
||||||
move.d _end, $r1
|
move.d _end, $r1
|
||||||
|
@ -411,7 +418,7 @@ no_command_line:
|
||||||
nop
|
nop
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
#ifdef CONFIG_ETRAXFS_SIM
|
#ifdef CONFIG_ETRAX_VCS_SIM
|
||||||
/* Set the watchdog timeout to something big. Will be removed when */
|
/* Set the watchdog timeout to something big. Will be removed when */
|
||||||
/* watchdog can be disabled with command line option */
|
/* watchdog can be disabled with command line option */
|
||||||
move.d 0x7fffffff, $r10
|
move.d 0x7fffffff, $r10
|
||||||
|
@ -423,25 +430,44 @@ no_command_line:
|
||||||
move.d __bss_start, $r0
|
move.d __bss_start, $r0
|
||||||
movem [$r0], $r13
|
movem [$r0], $r13
|
||||||
|
|
||||||
|
#ifdef CONFIG_ETRAX_L2CACHE
|
||||||
|
jsr l2cache_init
|
||||||
|
nop
|
||||||
|
#endif
|
||||||
|
|
||||||
jump start_kernel ; Jump to start_kernel() in init/main.c.
|
jump start_kernel ; Jump to start_kernel() in init/main.c.
|
||||||
nop
|
nop
|
||||||
|
|
||||||
.data
|
.data
|
||||||
etrax_irv:
|
etrax_irv:
|
||||||
.dword 0
|
.dword 0
|
||||||
|
|
||||||
|
; Variables for communication with the Axis flash map driver (axisflashmap),
|
||||||
|
; and for setting up memory in arch/cris/kernel/setup.c .
|
||||||
|
|
||||||
|
; romfs_start is set to the start of the root file system, if it exists
|
||||||
|
; in directly accessible memory (i.e. NOR Flash when booting from Flash,
|
||||||
|
; or RAM when booting directly from a network-downloaded RAM image)
|
||||||
romfs_start:
|
romfs_start:
|
||||||
.dword 0
|
.dword 0
|
||||||
|
|
||||||
|
; romfs_length is set to the size of the root file system image, if it exists
|
||||||
|
; in directly accessible memory (see romfs_start). Otherwise it is set to 0.
|
||||||
romfs_length:
|
romfs_length:
|
||||||
.dword 0
|
.dword 0
|
||||||
|
|
||||||
|
; romfs_in_flash is set to 1 if the root file system resides in directly
|
||||||
|
; accessible flash memory (i.e. NOR flash). It is set to 0 for RAM boot
|
||||||
|
; or NAND flash boot.
|
||||||
romfs_in_flash:
|
romfs_in_flash:
|
||||||
.dword 0
|
.dword 0
|
||||||
crisv32_nand_boot:
|
|
||||||
.dword 0
|
; nand_boot is set to 1 when the kernel has been booted from NAND flash
|
||||||
crisv32_nand_cramfs_offset:
|
nand_boot:
|
||||||
.dword 0
|
.dword 0
|
||||||
|
|
||||||
swapper_pg_dir = 0xc0002000
|
swapper_pg_dir = 0xc0002000
|
||||||
|
|
||||||
.section ".init.data", "aw"
|
.section ".init.data", "aw"
|
||||||
|
|
||||||
#include "../lib/hw_settings.S"
|
#include "../mach/hw_settings.S"
|
||||||
|
|
Reference in New Issue