dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

at91: factorize at91 interrupts init to soc 

they are the same except the default priority

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
This commit is contained in:
Jean-Christophe PLAGNIOL-VILLARD 2011-04-23 15:28:34 +08:00 committed by Arnd Bergmann
parent 21d08b9d55
commit 92100c12ca
45 changed files with 61 additions and 322 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
arch/arm/mach-at91/at91cap9.c
View File

@ -403,19 +403,8 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91cap9_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91cap9_soc = {
.map_io = at91cap9_map_io,
.default_irq_priority = at91cap9_default_irq_priority,
.init = at91cap9_initialize,
};

13
arch/arm/mach-at91/at91rm9200.c
View File

@ -379,19 +379,8 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
0 /* Advanced Interrupt Controller (IRQ6) */
};
void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91rm9200_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91rm9200_soc = {
.map_io = at91rm9200_map_io,
.default_irq_priority = at91rm9200_default_irq_priority,
.init = at91rm9200_initialize,
};

13
arch/arm/mach-at91/at91sam9260.c
View File

@ -410,19 +410,8 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91sam9260_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91sam9260_soc = {
.map_io = at91sam9260_map_io,
.default_irq_priority = at91sam9260_default_irq_priority,
.init = at91sam9260_initialize,
};

13
arch/arm/mach-at91/at91sam9261.c
View File

@ -361,19 +361,8 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91sam9261_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91sam9261_soc = {
.map_io = at91sam9261_map_io,
.default_irq_priority = at91sam9261_default_irq_priority,
.init = at91sam9261_initialize,
};

13
arch/arm/mach-at91/at91sam9263.c
View File

@ -372,19 +372,8 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ1) */
};
void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91sam9263_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91sam9263_soc = {
.map_io = at91sam9263_map_io,
.default_irq_priority = at91sam9263_default_irq_priority,
.init = at91sam9263_initialize,
};

13
arch/arm/mach-at91/at91sam9g45.c
View File

@ -388,19 +388,8 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller (IRQ0) */
};
void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91sam9g45_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91sam9g45_soc = {
.map_io = at91sam9g45_map_io,
.default_irq_priority = at91sam9g45_default_irq_priority,
.init = at91sam9g45_initialize,
};

13
arch/arm/mach-at91/at91sam9rl.c
View File

@ -359,19 +359,8 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
0, /* Advanced Interrupt Controller */
};
void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91sam9rl_default_irq_priority;
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
struct at91_soc __initdata at91sam9rl_soc = {
.map_io = at91sam9rl_map_io,
.default_irq_priority = at91sam9rl_default_irq_priority,
.init = at91sam9rl_initialize,
};

7
arch/arm/mach-at91/board-1arm.c
View File

@ -63,11 +63,6 @@ static void __init onearm_init_early(void)
at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -99,6 +94,6 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = onearm_init_early,
.init_irq = onearm_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = onearm_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-afeb-9260v1.c
View File

@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void)
at91_set_serial_console(0);
}
static void __init afeb9260_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -221,7 +215,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = afeb9260_init_early,
.init_irq = afeb9260_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = afeb9260_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-cam60.c
View File

@ -57,12 +57,6 @@ static void __init cam60_init_early(void)
at91_set_serial_console(0);
}
static void __init cam60_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host
*/
@ -201,6 +195,6 @@ MACHINE_START(CAM60, "KwikByte CAM60")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = cam60_init_early,
.init_irq = cam60_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = cam60_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-cap9adk.c
View File

@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void)
at91_set_serial_console(0);
}
static void __init cap9adk_init_irq(void)
{
at91cap9_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -399,6 +393,6 @@ MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = cap9adk_init_early,
.init_irq = cap9adk_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = cap9adk_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-carmeva.c
View File

@ -57,11 +57,6 @@ static void __init carmeva_init_early(void)
at91_set_serial_console(0);
}
static void __init carmeva_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -165,6 +160,6 @@ MACHINE_START(CARMEVA, "Carmeva")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = carmeva_init_early,
.init_irq = carmeva_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = carmeva_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-cpu9krea.c
View File

@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void)
at91_set_serial_console(0);
}
static void __init cpu9krea_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -378,6 +373,6 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = cpu9krea_init_early,
.init_irq = cpu9krea_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = cpu9krea_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-cpuat91.c
View File

@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void)
at91_set_serial_console(0);
}
static void __init cpuat91_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata cpuat91_eth_data = {
.is_rmii = 1,
};
@ -182,6 +177,6 @@ MACHINE_START(CPUAT91, "Eukrea")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = cpuat91_init_early,
.init_irq = cpuat91_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = cpuat91_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-csb337.c
View File

@ -58,11 +58,6 @@ static void __init csb337_init_early(void)
at91_set_serial_console(0);
}
static void __init csb337_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
@ -260,6 +255,6 @@ MACHINE_START(CSB337, "Cogent CSB337")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = csb337_init_early,
.init_irq = csb337_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = csb337_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-csb637.c
View File

@ -52,11 +52,6 @@ static void __init csb637_init_early(void)
at91_set_serial_console(0);
}
static void __init csb637_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
@ -141,6 +136,6 @@ MACHINE_START(CSB637, "Cogent CSB637")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = csb637_init_early,
.init_irq = csb637_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = csb637_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-eb9200.c
View File

@ -60,11 +60,6 @@ static void __init eb9200_init_early(void)
at91_set_serial_console(0);
}
static void __init eb9200_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -123,6 +118,6 @@ MACHINE_START(ATEB9200, "Embest ATEB9200")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = eb9200_init_early,
.init_irq = eb9200_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = eb9200_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-ecbat91.c
View File

@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void)
at91_set_serial_console(0);
}
static void __init ecb_at91init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata ecb_at91eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
@ -175,6 +170,6 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = ecb_at91init_early,
.init_irq = ecb_at91init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ecb_at91board_init,
MACHINE_END

7
arch/arm/mach-at91/board-eco920.c
View File

@ -47,11 +47,6 @@ static void __init eco920_init_early(void)
at91_set_serial_console(0);
}
static void __init eco920_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata eco920_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 1,
@ -137,6 +132,6 @@ MACHINE_START(ECO920, "eco920")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = eco920_init_early,
.init_irq = eco920_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = eco920_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-flexibity.c
View File

@ -49,11 +49,6 @@ static void __init flexibity_init_early(void)
at91_set_serial_console(0);
}
static void __init flexibity_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/* USB Host port */
static struct at91_usbh_data __initdata flexibity_usbh_data = {
.ports = 2,
@ -157,6 +152,6 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = flexibity_init_early,
.init_irq = flexibity_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = flexibity_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-foxg20.c
View File

@ -101,12 +101,6 @@ static void __init foxg20_init_early(void)
}
static void __init foxg20_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -269,6 +263,6 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = foxg20_init_early,
.init_irq = foxg20_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = foxg20_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-gsia18s.c
View File

@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void)
at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
}
static void __init init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* Two USB Host ports
*/
@ -579,6 +574,6 @@ MACHINE_START(GSIA18S, "GS_IA18_S")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = gsia18s_init_early,
.init_irq = init_irq,
.init_irq = at91_init_irq_default,
.init_machine = gsia18s_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-kafa.c
View File

@ -61,11 +61,6 @@ static void __init kafa_init_early(void)
at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
@ -101,6 +96,6 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = kafa_init_early,
.init_irq = kafa_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = kafa_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-kb9202.c
View File

@ -69,11 +69,6 @@ static void __init kb9202_init_early(void)
at91_set_serial_console(0);
}
static void __init kb9202_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
@ -142,6 +137,6 @@ MACHINE_START(KB9200, "KB920x")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = kb9202_init_early,
.init_irq = kb9202_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = kb9202_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-neocore926.c
View File

@ -66,12 +66,6 @@ static void __init neocore926_init_early(void)
at91_set_serial_console(0);
}
static void __init neocore926_init_irq(void)
{
at91sam9263_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -390,6 +384,6 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = neocore926_init_early,
.init_irq = neocore926_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = neocore926_board_init,
MACHINE_END

9
arch/arm/mach-at91/board-pcontrol-g20.c
View File

@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void)
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
}
static void __init init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
@ -225,6 +218,6 @@ MACHINE_START(PCONTROL_G20, "PControl G20")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = pcontrol_g20_init_early,
.init_irq = init_irq,
.init_irq = at91_init_irq_default,
.init_machine = pcontrol_g20_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-picotux200.c
View File

@ -60,11 +60,6 @@ static void __init picotux200_init_early(void)
at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata picotux200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -126,6 +121,6 @@ MACHINE_START(PICOTUX2XX, "picotux 200")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = picotux200_init_early,
.init_irq = picotux200_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = picotux200_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-qil-a9260.c
View File

@ -72,12 +72,6 @@ static void __init ek_init_early(void)
}
static void __init ek_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -271,6 +265,6 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-rm9200dk.c
View File

@ -65,11 +65,6 @@ static void __init dk_init_early(void)
at91_set_serial_console(0);
}
static void __init dk_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -230,6 +225,6 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = dk_init_early,
.init_irq = dk_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = dk_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -65,11 +65,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
static struct at91_eth_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
@ -196,6 +191,6 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9-l9260.c
View File

@ -67,12 +67,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -215,6 +209,6 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9260ek.c
View File

@ -70,12 +70,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -356,6 +350,6 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -69,12 +69,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9261_init_interrupts(NULL);
}
/*
* DM9000 ethernet device
*/
@ -623,6 +617,6 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9263ek.c
View File

@ -68,12 +68,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9263_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -454,6 +448,6 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

10
arch/arm/mach-at91/board-sam9g20ek.c
View File

@ -81,12 +81,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -406,7 +400,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END
@ -415,6 +409,6 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9m10g45ek.c
View File

@ -63,12 +63,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9g45_init_interrupts(NULL);
}
/*
* USB HS Host port (common to OHCI & EHCI)
*/
@ -424,6 +418,6 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-sam9rlek.c
View File

@ -53,12 +53,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9rl_init_interrupts(NULL);
}
/*
* USB HS Device port
*/
@ -332,6 +326,6 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

7
arch/arm/mach-at91/board-snapper9260.c
View File

@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void)
at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
}
static void __init snapper9260_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
static struct at91_usbh_data __initdata snapper9260_usbh_data = {
.ports = 2,
};
@ -181,7 +176,7 @@ MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = snapper9260_init_early,
.init_irq = snapper9260_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = snapper9260_board_init,
MACHINE_END

10
arch/arm/mach-at91/board-stamp9g20.c
View File

@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void)
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
}
static void __init init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* NAND flash
*/
@ -301,7 +295,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = portuxg20_init_early,
.init_irq = init_irq,
.init_irq = at91_init_irq_default,
.init_machine = portuxg20_board_init,
MACHINE_END
@ -310,6 +304,6 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = stamp9g20evb_init_early,
.init_irq = init_irq,
.init_irq = at91_init_irq_default,
.init_machine = stamp9g20evb_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-usb-a9260.c
View File

@ -60,12 +60,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -231,6 +225,6 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-usb-a9263.c
View File

@ -59,12 +59,6 @@ static void __init ek_init_early(void)
at91_set_serial_console(0);
}
static void __init ek_init_irq(void)
{
at91sam9263_init_interrupts(NULL);
}
/*
* USB Host port
*/
@ -247,6 +241,6 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263")
.timer = &at91sam926x_timer,
.map_io = at91_map_io,
.init_early = ek_init_early,
.init_irq = ek_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = ek_board_init,
MACHINE_END

8
arch/arm/mach-at91/board-yl-9200.c
View File

@ -79,12 +79,6 @@ static void __init yl9200_init_early(void)
at91_set_serial_console(0);
}
static void __init yl9200_init_irq(void)
{
at91rm9200_init_interrupts(NULL);
}
/*
* LEDs
*/
@ -601,6 +595,6 @@ MACHINE_START(YL9200, "uCdragon YL-9200")
.timer = &at91rm9200_timer,
.map_io = at91_map_io,
.init_early = yl9200_init_early,
.init_irq = yl9200_init_irq,
.init_irq = at91_init_irq_default,
.init_machine = yl9200_board_init,
MACHINE_END

9
arch/arm/mach-at91/generic.h
View File

@ -19,14 +19,9 @@ extern void __init at91_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */

14
arch/arm/mach-at91/setup.c
View File

@ -18,6 +18,20 @@
struct at91_soc __initdata at91_boot_soc;
void __init at91_init_irq_default(void)
{
at91_init_interrupts(at91_boot_soc.default_irq_priority);
}
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
at91_aic_init(priority);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
}
static struct map_desc at91_io_desc __initdata = {
.virtual = AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),

1
arch/arm/mach-at91/soc.h
View File

@ -5,6 +5,7 @@
*/
struct at91_soc {
unsigned int *default_irq_priority;
void (*map_io)(void);
void (*init)(unsigned long main_clock);
};