dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

Merge branch 'perf/urgent' into perf/core 

Merge this branch to pick up a fixlet and to update to a more recent base.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar 2012-07-05 21:10:23 +02:00
parent add79461a2 ce5c1fe9a9
commit 90574ebb7e
918 changed files with 9039 additions and 4667 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.mailmap
View File

@ -111,6 +111,7 @@ Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>

21
Documentation/ABI/testing/sysfs-block-rssd
View File

@ -1,26 +1,5 @@
What: /sys/block/rssd*/registers
Date: March 2012
KernelVersion: 3.3
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Dumps below driver information and
hardware registers.
- S ACTive
- Command Issue
- Completed
- PORT IRQ STAT
- HOST IRQ STAT
- Allocated
- Commands in Q
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.
What: /sys/block/rssd*/flags
Date: May 2012
KernelVersion: 3.5
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Dumps the flags in port and driver
data structure

31
Documentation/ABI/testing/sysfs-bus-iio
View File

@ -219,6 +219,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
@ -273,6 +274,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
@ -298,14 +300,19 @@ Description:
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
While DAC like devices typically use out_voltage,
a continuous frequency generating device, such as
a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
@ -316,6 +323,8 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@ -330,6 +339,8 @@ Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@ -338,6 +349,8 @@ Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
@ -346,6 +359,24 @@ Description:
normal operation. Y may be suppressed if all outputs are
controlled together.
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Output frequency for channel Y in Hz. The number must always be
specified and unique if the output corresponds to a single
channel.
What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
KernelVersion: 3.4.0
Contact: linux-iio@vger.kernel.org
Description:
Phase in radians of one frequency/clock output Y
(out_altvoltageY) relative to another frequency/clock output
(out_altvoltageZ) of the device X. The number must always be
specified and unique if the output corresponds to a single
channel.
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org

4
Documentation/DocBook/media/v4l/pixfmt.xml
View File

@ -986,13 +986,13 @@ http://www.thedirks.org/winnov/</ulink></para></entry>
<row id="V4L2-PIX-FMT-Y4">
<entry><constant>V4L2_PIX_FMT_Y4</constant></entry>
<entry>'Y04 '</entry>
<entry>Old 4-bit greyscale format. Only the least significant 4 bits of each byte are used,
<entry>Old 4-bit greyscale format. Only the most significant 4 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
<row id="V4L2-PIX-FMT-Y6">
<entry><constant>V4L2_PIX_FMT_Y6</constant></entry>
<entry>'Y06 '</entry>
<entry>Old 6-bit greyscale format. Only the least significant 6 bits of each byte are used,
<entry>Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used,
the other bits are set to 0.</entry>
</row>
</tbody>

2
Documentation/DocBook/media/v4l/v4l2.xml
View File

@ -560,6 +560,7 @@ and discussions on the V4L mailing list.</revremark>
&sub-g-tuner;
&sub-log-status;
&sub-overlay;
&sub-prepare-buf;
&sub-qbuf;
&sub-querybuf;
&sub-querycap;
@ -567,7 +568,6 @@ and discussions on the V4L mailing list.</revremark>
&sub-query-dv-preset;
&sub-query-dv-timings;
&sub-querystd;
&sub-prepare-buf;
&sub-reqbufs;
&sub-s-hw-freq-seek;
&sub-streamon;

5
Documentation/DocBook/media/v4l/vidioc-create-bufs.xml
View File

@ -108,10 +108,9 @@ information.</para>
/></entry>
</row>
<row>
<entry>__u32</entry>
<entry>struct&nbsp;v4l2_format</entry>
<entry><structfield>format</structfield></entry>
<entry>Filled in by the application, preserved by the driver.
See <xref linkend="v4l2-format" />.</entry>
<entry>Filled in by the application, preserved by the driver.</entry>
</row>
<row>
<entry>__u32</entry>

2
Documentation/DocBook/media/v4l/vidioc-dqevent.xml
View File

@ -89,7 +89,7 @@
<row>
<entry></entry>
<entry>&v4l2-event-frame-sync;</entry>
<entry><structfield>frame</structfield></entry>
<entry><structfield>frame_sync</structfield></entry>
<entry>Event data for event V4L2_EVENT_FRAME_SYNC.</entry>
</row>
<row>

2
Documentation/arm/SPEAr/overview.txt
View File

@ -60,4 +60,4 @@ Introduction
Document Author
---------------
Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics

129
Documentation/device-mapper/verity.txt
View File

@ -7,39 +7,39 @@ This target is read-only.
Construction Parameters
=======================
<version> <dev> <hash_dev> <hash_start>
<version> <dev> <hash_dev>
<data_block_size> <hash_block_size>
<num_data_blocks> <hash_start_block>
<algorithm> <digest> <salt>
<version>
This is the version number of the on-disk format.
This is the type of the on-disk hash format.
0 is the original format used in the Chromium OS.
The salt is appended when hashing, digests are stored continuously and
the rest of the block is padded with zeros.
The salt is appended when hashing, digests are stored continuously and
the rest of the block is padded with zeros.
1 is the current format that should be used for new devices.
The salt is prepended when hashing and each digest is
padded with zeros to the power of two.
The salt is prepended when hashing and each digest is
padded with zeros to the power of two.
<dev>
This is the device containing the data the integrity of which needs to be
This is the device containing data, the integrity of which needs to be
checked. It may be specified as a path, like /dev/sdaX, or a device number,
<major>:<minor>.
<hash_dev>
This is the device that that supplies the hash tree data. It may be
This is the device that supplies the hash tree data. It may be
specified similarly to the device path and may be the same device. If the
same device is used, the hash_start should be outside of the dm-verity
configured device size.
same device is used, the hash_start should be outside the configured
dm-verity device.
<data_block_size>
The block size on a data device. Each block corresponds to one digest on
the hash device.
The block size on a data device in bytes.
Each block corresponds to one digest on the hash device.
<hash_block_size>
The size of a hash block.
The size of a hash block in bytes.
<num_data_blocks>
The number of data blocks on the data device. Additional blocks are
@ -65,7 +65,7 @@ Construction Parameters
Theory of operation
===================
dm-verity is meant to be setup as part of a verified boot path. This
dm-verity is meant to be set up as part of a verified boot path. This
may be anything ranging from a boot using tboot or trustedgrub to just
booting from a known-good device (like a USB drive or CD).
@ -73,20 +73,20 @@ When a dm-verity device is configured, it is expected that the caller
has been authenticated in some way (cryptographic signatures, etc).
After instantiation, all hashes will be verified on-demand during
disk access. If they cannot be verified up to the root node of the
tree, the root hash, then the I/O will fail. This should identify
tree, the root hash, then the I/O will fail. This should detect
tampering with any data on the device and the hash data.
Cryptographic hashes are used to assert the integrity of the device on a
per-block basis. This allows for a lightweight hash computation on first read
into the page cache. Block hashes are stored linearly-aligned to the nearest
block the size of a page.
per-block basis. This allows for a lightweight hash computation on first read
into the page cache. Block hashes are stored linearly, aligned to the nearest
block size.
Hash Tree
---------
Each node in the tree is a cryptographic hash. If it is a leaf node, the hash
is of some block data on disk. If it is an intermediary node, then the hash is
of a number of child nodes.
of some data block on disk is calculated. If it is an intermediary node,
the hash of a number of child nodes is calculated.
Each entry in the tree is a collection of neighboring nodes that fit in one
block. The number is determined based on block_size and the size of the
@ -110,63 +110,23 @@ alg = sha256, num_blocks = 32768, block_size = 4096
On-disk format
==============
Below is the recommended on-disk format. The verity kernel code does not
read the on-disk header. It only reads the hash blocks which directly
follow the header. It is expected that a user-space tool will verify the
integrity of the verity_header and then call dmsetup with the correct
parameters. Alternatively, the header can be omitted and the dmsetup
parameters can be passed via the kernel command-line in a rooted chain
of trust where the command-line is verified.
The verity kernel code does not read the verity metadata on-disk header.
It only reads the hash blocks which directly follow the header.
It is expected that a user-space tool will verify the integrity of the
verity header.
The on-disk format is especially useful in cases where the hash blocks
are on a separate partition. The magic number allows easy identification
of the partition contents. Alternatively, the hash blocks can be stored
in the same partition as the data to be verified. In such a configuration
the filesystem on the partition would be sized a little smaller than
the full-partition, leaving room for the hash blocks.
struct superblock {
uint8_t signature[8]
"verity\0\0";
uint8_t version;
1 - current format
uint8_t data_block_bits;
log2(data block size)
uint8_t hash_block_bits;
log2(hash block size)
uint8_t pad1[1];
zero padding
uint16_t salt_size;
big-endian salt size
uint8_t pad2[2];
zero padding
uint32_t data_blocks_hi;
big-endian high 32 bits of the 64-bit number of data blocks
uint32_t data_blocks_lo;
big-endian low 32 bits of the 64-bit number of data blocks
uint8_t algorithm[16];
cryptographic algorithm
uint8_t salt[384];
salt (the salt size is specified above)
uint8_t pad3[88];
zero padding to 512-byte boundary
}
Alternatively, the header can be omitted and the dmsetup parameters can
be passed via the kernel command-line in a rooted chain of trust where
the command-line is verified.
Directly following the header (and with sector number padded to the next hash
block boundary) are the hash blocks which are stored a depth at a time
(starting from the root), sorted in order of increasing index.
The full specification of kernel parameters and on-disk metadata format
is available at the cryptsetup project's wiki page
http://code.google.com/p/cryptsetup/wiki/DMVerity
Status
======
V (for Valid) is returned if every check performed so far was valid.
@ -174,21 +134,22 @@ If any check failed, C (for Corruption) is returned.
Example
=======
Setup a device:
dmsetup create vroot --table \
"0 2097152 "\
"verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\
Set up a device:
# dmsetup create vroot --readonly --table \
"0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\
"4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\
"1234000000000000000000000000000000000000000000000000000000000000"
A command line tool veritysetup is available to compute or verify
the hash tree or activate the kernel driver. This is available from
the LVM2 upstream repository and may be supplied as a package called
device-mapper-verity-tools:
git://sources.redhat.com/git/lvm2
http://sourceware.org/git/?p=lvm2.git
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2
the hash tree or activate the kernel device. This is available from
the cryptsetup upstream repository http://code.google.com/p/cryptsetup/
(as a libcryptsetup extension).
veritysetup -a vroot /dev/sda1 /dev/sda2 \
4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
Create hash on the device:
# veritysetup format /dev/sda1 /dev/sda2
...
Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076
Activate the device:
# veritysetup create vroot /dev/sda1 /dev/sda2 \
4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076

22
Documentation/hwmon/coretemp
View File

@ -6,7 +6,9 @@ Supported chips:
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
@ -52,6 +54,17 @@ Some information comes from ark.intel.com
Process Processor TjMax(C)
22nm Core i5/i7 Processors
i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
i5 3427U, 3360M/3320M 105
i7 3770/3770K 105
i5 3570/3570K, 3550, 3470/3450 105
i7 3770S 103
i5 3570S/3550S, 3475S/3470S/3450S 103
i7 3770T 94
i5 3570T 94
i5 3470T 91
32nm Core i3/i5/i7 Processors
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
@ -65,6 +78,11 @@ Process Processor TjMax(C)
U3400 105
P4505/P4500 90
32nm Atom Processors
Z2460 90
D2700/2550/2500 100
N2850/2800/2650/2600 100
45nm Xeon Processors 5400 Quad-Core
X5492, X5482, X5472, X5470, X5460, X5450 85
E5472, E5462, E5450/40/30/20/10/05 85
@ -85,6 +103,8 @@ Process Processor TjMax(C)
N475/470/455/450 100
N280/270 90
330/230 125
E680/660/640/620 90
E680T/660T/640T/620T 110
45nm Core2 Processors
Solo ULV SU3500/3300 100

44
Documentation/networking/stmmac.txt
View File

@ -10,8 +10,8 @@ Currently this network device driver is for all STM embedded MAC/GMAC
(i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
FF1152AMT0221 D1215994A VIRTEX FPGA board.
DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
Universal version 4.0 have been used for developing this driver.
DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
MAC 10/100 Universal version 4.0 have been used for developing this driver.
This driver supports both the platform bus and PCI.
@ -54,27 +54,27 @@ net_device structure enabling the scatter/gather feature.
When one or more packets are received, an interrupt happens. The interrupts
are not queued so the driver has to scan all the descriptors in the ring during
the receive process.
This is based on NAPI so the interrupt handler signals only if there is work to be
done, and it exits.
This is based on NAPI so the interrupt handler signals only if there is work
to be done, and it exits.
Then the poll method will be scheduled at some future point.
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
buffers in order to avoid the memcpy (Zero-copy).
4.3) Timer-Driver Interrupt
Instead of having the device that asynchronously notifies the frame receptions, the
driver configures a timer to generate an interrupt at regular intervals.
Based on the granularity of the timer, the frames that are received by the device
will experience different levels of latency. Some NICs have dedicated timer
device to perform this task. STMMAC can use either the RTC device or the TMU
channel 2 on STLinux platforms.
Instead of having the device that asynchronously notifies the frame receptions,
the driver configures a timer to generate an interrupt at regular intervals.
Based on the granularity of the timer, the frames that are received by the
device will experience different levels of latency. Some NICs have dedicated
timer device to perform this task. STMMAC can use either the RTC device or the
TMU channel 2 on STLinux platforms.
The timers frequency can be passed to the driver as parameter; when change it,
take care of both hardware capability and network stability/performance impact.
Several performance tests on STM platforms showed this optimisation allows to spare
the CPU while having the maximum throughput.
Several performance tests on STM platforms showed this optimisation allows to
spare the CPU while having the maximum throughput.
4.4) WOL
Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
core.
Wake up on Lan feature through Magic and Unicast frames are supported for the
GMAC core.
4.5) DMA descriptors
Driver handles both normal and enhanced descriptors. The latter has been only
@ -106,7 +106,8 @@ Several driver's information can be passed through the platform
These are included in the include/linux/stmmac.h header file
and detailed below as well:
struct plat_stmmacenet_data {
struct plat_stmmacenet_data {
char *phy_bus_name;
int bus_id;
int phy_addr;
int interface;
@ -124,19 +125,24 @@ and detailed below as well:
void (*bus_setup)(void __iomem *ioaddr);
int (*init)(struct platform_device *pdev);
void (*exit)(struct platform_device *pdev);
void *custom_cfg;
void *custom_data;
void *bsp_priv;
};
Where:
o phy_bus_name: phy bus name to attach to the stmmac.
o bus_id: bus identifier.
o phy_addr: the physical address can be passed from the platform.
If it is set to -1 the driver will automatically
detect it at run-time by probing all the 32 addresses.
o interface: PHY device's interface.
o mdio_bus_data: specific platform fields for the MDIO bus.
o pbl: the Programmable Burst Length is maximum number of beats to
o dma_cfg: internal DMA parameters
o pbl: the Programmable Burst Length is maximum number of beats to
be transferred in one DMA transaction.
GMAC also enables the 4xPBL by default.
o fixed_burst/mixed_burst/burst_len
o clk_csr: fixed CSR Clock range selection.
o has_gmac: uses the GMAC core.
o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@ -160,8 +166,9 @@ Where:
this is sometime necessary on some platforms (e.g. ST boxes)
where the HW needs to have set some PIO lines or system cfg
registers.
o custom_cfg: this is a custom configuration that can be passed while
initialising the resources.
o custom_cfg/custom_data: this is a custom configuration that can be passed
while initialising the resources.
o bsp_priv: another private poiter.
For MDIO bus The we have:
@ -180,7 +187,6 @@ Where:
o irqs: list of IRQs, one per PHY.
o probed_phy_irq: if irqs is NULL, use this for probed PHY.
For DMA engine we have the following internal fields that should be
tuned according to the HW capabilities.

50
Documentation/prctl/no_new_privs.txt Normal file
View File

@ -0,0 +1,50 @@
The execve system call can grant a newly-started program privileges that
its parent did not have. The most obvious examples are setuid/setgid
programs and file capabilities. To prevent the parent program from
gaining these privileges as well, the kernel and user code must be
careful to prevent the parent from doing anything that could subvert the
child. For example:
- The dynamic loader handles LD_* environment variables differently if
a program is setuid.
- chroot is disallowed to unprivileged processes, since it would allow
/etc/passwd to be replaced from the point of view of a process that
inherited chroot.
- The exec code has special handling for ptrace.
These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a
new, generic mechanism to make it safe for a process to modify its
execution environment in a manner that persists across execve. Any task
can set no_new_privs. Once the bit is set, it is inherited across fork,
clone, and execve and cannot be unset. With no_new_privs set, execve
promises not to grant the privilege to do anything that could not have
been done without the execve call. For example, the setuid and setgid
bits will no longer change the uid or gid; file capabilities will not
add to the permitted set, and LSMs will not relax constraints after
execve.
Note that no_new_privs does not prevent privilege changes that do not
involve execve. An appropriately privileged task can still call
setuid(2) and receive SCM_RIGHTS datagrams.
There are two main use cases for no_new_privs so far:
- Filters installed for the seccomp mode 2 sandbox persist across
execve and can change the behavior of newly-executed programs.
Unprivileged users are therefore only allowed to install such filters
if no_new_privs is set.
- By itself, no_new_privs can be used to reduce the attack surface
available to an unprivileged user. If everything running with a
given uid has no_new_privs set, then that uid will be unable to
escalate its privileges by directly attacking setuid, setgid, and
fcap-using binaries; it will need to compromise something without the
no_new_privs bit set first.
In the future, other potentially dangerous kernel features could become
available to unprivileged tasks if no_new_privs is set. In principle,
several options to unshare(2) and clone(2) would be safe when
no_new_privs is set, and no_new_privs + chroot is considerable less
dangerous than chroot by itself.

6
Documentation/stable_kernel_rules.txt
View File

@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the
marked CONFIG_BROKEN), an oops, a hang, data corruption, a real
security issue, or some "oh, that's not good" issue. In short, something
critical.
- Serious issues as reported by a user of a distribution kernel may also
be considered if they fix a notable performance or interactivity issue.
As these fixes are not as obvious and have a higher risk of a subtle
regression they should only be submitted by a distribution kernel
maintainer and include an addendum linking to a bugzilla entry if it
exists and additional information on the user-visible impact.
- New device IDs and quirks are also accepted.
- No "theoretical race condition" issues, unless an explanation of how the
race can be exploited is also provided.

40
MAINTAINERS
View File

@ -579,7 +579,7 @@ F: drivers/net/appletalk/
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
@ -1646,11 +1646,11 @@ S: Maintained
F: drivers/gpio/gpio-bt8xx.c
BTRFS FILE SYSTEM
M: Chris Mason <chris.mason@oracle.com>
M: Chris Mason <chris.mason@fusionio.com>
L: linux-btrfs@vger.kernel.org
W: http://btrfs.wiki.kernel.org/
Q: http://patchwork.kernel.org/project/linux-btrfs/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
S: Maintained
F: Documentation/filesystems/btrfs.txt
F: fs/btrfs/
@ -1800,6 +1800,9 @@ F: include/linux/cfag12864b.h
CFG80211 and NL80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/net/cfg80211.h
@ -4349,7 +4352,8 @@ MAC80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
@ -4360,7 +4364,8 @@ M: Stefano Brivio <stefano.brivio@polimi.it>
M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: net/mac80211/rc80211_pid*
@ -4649,8 +4654,8 @@ L: netfilter@vger.kernel.org
L: coreteam@netfilter.org
W: http://www.netfilter.org/
W: http://www.iptables.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
T: git git://1984.lsi.us.es/nf
T: git git://1984.lsi.us.es/nf-next
S: Supported
F: include/linux/netfilter*
F: include/linux/netfilter/
@ -5291,7 +5296,7 @@ S: Maintained
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -5711,6 +5716,9 @@ F: include/linux/remoteproc.h
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
F: net/rfkill/
@ -5865,7 +5873,7 @@ S: Maintained
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
@ -6013,7 +6021,7 @@ S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
@ -6369,7 +6377,7 @@ S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -6378,7 +6386,7 @@ S: Maintained
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -6387,7 +6395,7 @@ S: Maintained
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@ -6398,7 +6406,7 @@ F: arch/arm/mach-spear3xx/
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -6406,7 +6414,7 @@ S: Maintained
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
M: Viresh Kumar <viresh.kumar@st.com>
M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
@ -7413,7 +7421,7 @@ F: include/linux/vlynq.h
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
M: Manohar Vanga <manohar.vanga@cern.ch>
M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained

6
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc5
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
@ -561,6 +561,8 @@ else
KBUILD_CFLAGS += -O2
endif
include $(srctree)/arch/$(SRCARCH)/Makefile
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
@ -571,8 +573,6 @@ KBUILD_CFLAGS += $(call cc-option,-fno-reorder-blocks,) \
$(call cc-option,-fno-partial-inlining)
endif
include $(srctree)/arch/$(SRCARCH)/Makefile
ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif

2
arch/arm/Kconfig
View File

@ -293,6 +293,7 @@ config ARCH_VERSATILE
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
@ -588,6 +589,7 @@ config ARCH_ORION5X
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:

4
arch/arm/boot/dts/mmp2-brownstone.dts
View File

@ -11,7 +11,7 @@
/include/ "mmp2.dtsi"
/ {
model = "Marvell MMP2 Aspenite Development Board";
model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
@ -19,7 +19,7 @@
};
memory {
reg = <0x00000000 0x04000000>;
reg = <0x00000000 0x08000000>;
};
soc {

2
arch/arm/boot/dts/omap2.dtsi
View File

@ -44,6 +44,8 @@
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <96>;
reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {

2
arch/arm/boot/dts/spear1310-evb.dts
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear1310.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1310 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear1340-evb.dts
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr1340 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear1340.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr1340 SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear13xx.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr13xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear300-evb.dts
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear300.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr300 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear310-evb.dts
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear310.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr310 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear320-evb.dts
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 Evaluation Baord
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear320.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for SPEAr320 SoC
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

2
arch/arm/boot/dts/spear3xx.dtsi
View File

@ -1,7 +1,7 @@
/*
* DTS file for all SPEAr3xx SoCs
*
* Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
* Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License

16
arch/arm/common/dmabounce.c
View File

@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
struct safe_buffer *buf;
unsigned long off;
dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
__func__, addr, off, sz, dir);
dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
__func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
BUG_ON(buf->direction != dir);
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);
@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
struct safe_buffer *buf;
unsigned long off;
dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
__func__, addr, off, sz, dir);
dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
__func__, addr, sz, dir);
buf = find_safe_buffer_dev(dev, addr, __func__);
if (!buf)
@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
BUG_ON(buf->direction != dir);
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
buf->safe, buf->safe_dma_addr);
DO_STATS(dev->archdata.dmabounce->bounce_count++);

1
arch/arm/include/asm/futex.h
View File

@ -19,6 +19,7 @@
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"

2
arch/arm/include/asm/hardware/sp810.h
View File

@ -4,7 +4,7 @@
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

1
arch/arm/kernel/entry-armv.S
View File

@ -495,6 +495,7 @@ ENDPROC(__und_usr)
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
.align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"

2
arch/arm/kernel/kprobes-thumb.c
View File

@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = {
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */

2
arch/arm/kernel/vmlinux.lds.S
View File

@ -183,7 +183,9 @@ SECTIONS
}
#endif
#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
#endif
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */

8
arch/arm/mach-exynos/Kconfig
View File

@ -212,7 +212,7 @@ config MACH_SMDKV310
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select SAMSUNG_DEV_PWM
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210
select S5P_DEV_ONENAND
select S5P_DEV_TV
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@ -303,7 +303,7 @@ config MACH_NURI
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select EXYNOS_DEV_DRM
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@ -341,7 +341,7 @@ config MACH_ORIGEN
select SAMSUNG_DEV_PWM
select EXYNOS_DEV_DRM
select EXYNOS_DEV_SYSMMU
select EXYNOS4_DEV_DMA
select EXYNOS_DEV_DMA
select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI

6
arch/arm/mach-highbank/Makefile
View File

@ -1,4 +1,8 @@
obj-y := clock.o highbank.o system.o
obj-y := clock.o highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o

1
arch/arm/mach-highbank/core.h
View File

@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void);
static inline void highbank_lluart_map_io(void) {}
#endif
extern void highbank_smc1(int fn, int arg);

14
arch/arm/mach-highbank/highbank.c
View File

@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = {
{}
};
#ifdef CONFIG_CACHE_L2X0
static void highbank_l2x0_disable(void)
{
/* Disable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x0);
}
#endif
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
outer_cache.disable = highbank_l2x0_disable;
#endif
}
static void __init highbank_timer_init(void)

27
arch/arm/mach-highbank/smc.S Normal file
View File

@ -0,0 +1,27 @@
/*
* Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
* Copyright 2012 Calxeda, Inc.
*
* This program is free software,you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
/*
* This is common routine to manage secure monitor API
* used to modify the PL310 secure registers.
* 'r0' contains the value to be modified and 'r12' contains
* the monitor API number.
* Function signature : void highbank_smc1(u32 fn, u32 arg)
*/
ENTRY(highbank_smc1)
stmfd sp!, {r4-r11, lr}
mov r12, r0
mov r0, r1
dsb
smc #0
ldmfd sp!, {r4-r11, pc}
ENDPROC(highbank_smc1)

1
arch/arm/mach-imx/Kconfig
View File

@ -477,6 +477,7 @@ config MACH_MX31_3DS
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI

3
arch/arm/mach-imx/clk-imx1.c
View File

@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
MX1_TIM1_INT);
mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}

4
arch/arm/mach-imx/clk-imx21.c
View File

@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
MX21_INT_GPT1);
mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
return 0;
}

2
arch/arm/mach-imx/clk-imx25.c
View File

@ -243,6 +243,6 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}

3
arch/arm/mach-imx/clk-imx27.c
View File

@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
MX27_INT_GPT1);
mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);

3
arch/arm/mach-imx/clk-imx31.c
View File

@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
MX31_INT_GPT);
mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}

6
arch/arm/mach-imx/clk-imx35.c
View File

@ -267,11 +267,9 @@ int __init mx35_clocks_init()
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(&epit1_clk,
MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
MX35_INT_GPT);
mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;

12
arch/arm/mach-imx/clk-imx51-imx53.c
View File

@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
MX51_INT_GPT);
mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
MX53_INT_GPT);
mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());

26
arch/arm/mach-imx/clk-imx6q.c
View File

@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
static const char * const clks_init_on[] __initconst = {
"mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
};
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
@ -156,16 +152,20 @@ enum mx6q_clks {
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
ssi2_ipg, ssi3_ipg, clk_max
ssi2_ipg, ssi3_ipg, rom,
clk_max
};
static struct clk *clk[clk_max];
static enum mx6q_clks const clks_init_on[] __initconst = {
mmdc_ch0_axi, rom,
};
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
@ -365,6 +365,7 @@ int __init mx6q_clocks_init(void)
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
@ -424,21 +425,14 @@ int __init mx6q_clocks_init(void)
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
c = clk_get_sys(clks_init_on[i], NULL);
if (IS_ERR(c)) {
pr_err("%s: failed to get clk %s", __func__,
clks_init_on[i]);
return PTR_ERR(c);
}
clk_prepare_enable(c);
}
for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
mxc_timer_init(NULL, base, irq);
mxc_timer_init(base, irq);
return 0;
}

95
arch/arm/mach-imx/clk-pllv2.c
View File

@ -74,30 +74,15 @@ struct clk_pllv2 {
void __iomem *base;
};
static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
void __iomem *pllbase;
unsigned long dbl;
s64 temp;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
pllbase = pll->base;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
if (pll_hfsm == 0) {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
} else {
dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
}
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
return temp;
}
static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_pllv2 *pll = to_clk_pllv2(hw);
u32 reg;
u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
pllbase = pll->base;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
}
static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
{
u32 reg;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
unsigned long pll_hfsm, dp_ctl;
pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
return -EINVAL;
pdf--;
temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
do_div(temp64, quad_parent_rate/1000000);
temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
reg = mfi << 4 | pdf;
*dp_op = reg;
*dp_mfd = mfd;
*dp_mfn = mfn;
return 0;
}
static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pllv2 *pll = to_clk_pllv2(hw);
void __iomem *pllbase;
u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
int ret;
pllbase = pll->base;
ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
if (ret)
return ret;
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
if (pll_hfsm == 0) {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
} else {
reg = mfi << 4 | pdf;
__raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
__raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
__raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
}
__raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
__raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
__raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
return rate;
u32 dp_op, dp_mfd, dp_mfn;
__clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)

2
arch/arm/mach-imx/crm-regs-imx5.h
View File

@ -23,7 +23,7 @@
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00

42
arch/arm/mach-imx/hotplug.c
View File

@ -12,6 +12,7 @@
#include <linux/errno.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu)
return 1;
}
static inline void cpu_enter_lowpower(void)
{
unsigned int v;
flush_cache_all();
asm volatile(
"mcr p15, 0, %1, c7, c5, 0\n"
" mcr p15, 0, %1, c7, c10, 4\n"
/*
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, %3\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
static inline void cpu_leave_lowpower(void)
{
unsigned int v;
asm volatile(
"mrc p15, 0, %0, c1, c0, 0\n"
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
/*
* platform-specific code to shutdown a CPU
*
@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu)
*/
void platform_cpu_die(unsigned int cpu)
{
flush_cache_all();
cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);

1
arch/arm/mach-imx/mach-cpuimx35.c
View File

@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
.type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},

1
arch/arm/mach-imx/mach-cpuimx51sd.c
View File

@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
.type = "tsc2007",
.platform_data = &tsc2007_info,
},
};

36
arch/arm/mach-imx/mach-imx27_visstrim_m10.c
View File

@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = {
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = {
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
static const struct gpio visstrim_m10_gpios[] __initconst = {
{
.gpio = TVP5150_RSTN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
.label = "tvp5150_rstn",
},
{
.gpio = TVP5150_PWDN,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "tvp5150_pwdn",
},
{
.gpio = OTG_PHY_CS_GPIO,
.flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
.label = "usbotg_cs",
},
};
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void)
struct platform_device *pdev;
int dma;
/* Initialize tvp5150 gpios */
mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
gpio_set_value(TVP5150_RSTN, 1);
gpio_set_value(TVP5150_PWDN, 0);
ndelay(1);
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mdelay(10);
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void)
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
ret = gpio_request_array(visstrim_m10_gpios,
ARRAY_SIZE(visstrim_m10_gpios));
if (ret)
pr_err("Failed to request gpios (%d)\n", ret);
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);

2
arch/arm/mach-imx/mach-mx21ads.c
View File

@ -32,7 +32,7 @@
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
#define MX21ADS_MMIO_SIZE SZ_16M
#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))

4
arch/arm/mach-imx/mm-imx3.c
View File

@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size,
void __init imx3_init_l2x0(void)
{
#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void)
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
#endif
}
#ifdef CONFIG_SOC_IMX31
@ -179,6 +181,8 @@ void __init imx31_soc_init(void)
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
pinctrl_provide_dummies();
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));

2
arch/arm/mach-imx/mm-imx5.c
View File

@ -202,6 +202,8 @@ void __init imx51_soc_init(void)
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
pinctrl_provide_dummies();
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);

3
arch/arm/mach-kirkwood/board-iconnect.c
View File

@ -20,9 +20,6 @@
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>

9
arch/arm/mach-kirkwood/common.c
View File

@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev,
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name,
bit_idx, 0, &gating_lock, fn);
}
static struct clk *ge0, *ge1;
void __init kirkwood_clk_init(void)
{
struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
/* The interface forgets the MAC address assigned by u-boot if
the clock is turned off, so claim the clk now. */
clk_prepare_enable(ge0);
}
@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
clk_prepare_enable(ge1);
}

1
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
View File

@ -38,6 +38,7 @@
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010

1
arch/arm/mach-kirkwood/include/mach/kirkwood.h
View File

@ -80,6 +80,7 @@
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)

7
arch/arm/mach-mmp/irq.c
View File

@ -241,6 +241,7 @@ void __init mmp2_init_icu(void)
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
@ -249,6 +250,7 @@ void __init mmp2_init_icu(void)
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
@ -257,6 +259,7 @@ void __init mmp2_init_icu(void)
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
@ -265,6 +268,7 @@ void __init mmp2_init_icu(void)
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
@ -273,6 +277,7 @@ void __init mmp2_init_icu(void)
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
@ -281,6 +286,7 @@ void __init mmp2_init_icu(void)
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
@ -289,6 +295,7 @@ void __init mmp2_init_icu(void)
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,

5
arch/arm/mach-omap2/board-flash.c
View File

@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
gpmc_onenand_init(&board_onenand_data);
}
#else
void
__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
{
}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \

6
arch/arm/mach-omap2/board-n8x0.c
View File

@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data tusb_data = {
#if defined(CONFIG_USB_MUSB_OTG)
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
.mode = MUSB_PERIPHERAL,
#else /* defined(CONFIG_USB_MUSB_HOST) */
#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,

28
arch/arm/mach-omap2/board-omap3beagle.c
View File

@ -81,13 +81,13 @@ static u8 omap3_beagle_version;
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
int reset_gpio;
int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
.reset_gpio = 129,
.dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void)
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
beagle_config.reset_gpio = 170;
beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
beagle_config.reset_gpio = 170;
beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"DVI_LDO_EN");
if (r)
pr_err("%s: unable to configure DVI_LDO_EN\n",
__func__);
beagle_config.dvi_pd_gpio = gpio + 2;
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev,
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
dvi_panel.power_down_gpio = beagle_config.reset_gpio;
dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void)
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
if (beagle_config.mmc1_gpio_wp != -EINVAL)
if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void)
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
if (gpio_is_valid(beagle_config.dvi_pd_gpio))
omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
/* REVISIT leave DVI powered down until it's needed ... */
gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,

6
arch/arm/mach-omap2/board-rx51-peripherals.c
View File

@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = {
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
.irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = {
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
.irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void)
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;

2
arch/arm/mach-omap2/clock3xxx_data.c
View File

@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void)
struct omap_clk *c;
u32 cpu_clkflg = 0;
if (cpu_is_omap3517()) {
if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {

10
arch/arm/mach-omap2/clock44xx_data.c
View File

@ -84,6 +84,7 @@ static struct clk slimbus_clk = {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
.clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
@ -512,6 +513,7 @@ static struct clk ddrphy_ck = {
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
.clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = {
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
.clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = {
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
.clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = {
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
.clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void)
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
} else if (cpu_is_omap446x()) {
} else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
if (cpu_is_omap447x())
pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}

11
arch/arm/mach-omap2/cm.h
View File

@ -22,4 +22,15 @@
*/
#define MAX_MODULE_READY_TIME 2000
/*
* MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
* the PRCM to request that a module enter the inactive state in the
* case of OMAP2 & 3. In the case of OMAP4 this is the max duration
* in microseconds for the module to reach the inactive state from
* a functional state.
* XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
* kernel init.
*/
#define MAX_MODULE_DISABLE_TIME 5000
#endif

4
arch/arm/mach-omap2/cminst44xx.c
View File

@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);
MAX_MODULE_DISABLE_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**

4
arch/arm/mach-omap2/display.c
View File

@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
goto err;
}
r = omap_device_register(pdev);
r = platform_device_add(pdev);
if (r) {
pr_err("Could not register omap_device for %s\n", pdev_name);
pr_err("Could not register platform_device for %s\n", pdev_name);
goto err;
}

3
arch/arm/mach-omap2/dsp.c
View File

@ -20,6 +20,9 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <asm/memblock.h>
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS

11
arch/arm/mach-omap2/id.c
View File

@ -246,6 +246,17 @@ void __init omap3xxx_check_features(void)
omap_features |= OMAP3_HAS_SDRC;
/*
* am35x fixups:
* - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
* reserved and therefore return 0 when read. Unfortunately,
* OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
* mean that a feature is present even though it isn't so clear
* the incorrectly set feature bits.
*/
if (soc_is_am35xx())
omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.

1
arch/arm/mach-omap2/irq.c
View File

@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num)
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;

4
arch/arm/mach-omap2/mux.c
View File

@ -41,6 +41,7 @@
#include "control.h"
#include "mux.h"
#include "prm.h"
#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
return -ENODEV;
}
static int __init
omap_mux_get_by_name(const char *muxname,
int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{

11
arch/arm/mach-omap2/mux.h
View File

@ -59,6 +59,7 @@
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads);
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
int omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux);
#else
static inline int omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
return 0;
}
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;

2
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */

8
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
.idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = {
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
/*
* HDMI audio requires to use no-idle mode. Hence,
* set idle mode by software.
*/
.flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",

3
arch/arm/mach-omap2/omap_l3_smx.c
View File

@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3,
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
WARN(true, "%s seen by %s %s at address %x\n",
pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
WARN_ON(1);
return IRQ_HANDLED;
}

6
arch/arm/mach-omap2/omap_phy_internal.c
View File

@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode)
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
#endif
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
#endif
#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}

1
arch/arm/mach-omap2/pm34xx.c
View File

@ -724,6 +724,7 @@ int __init omap3_pm_init(void)
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");

14
arch/arm/mach-omap2/prm2xxx_3xxx.c
View File

@ -15,6 +15,7 @@
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask)
static int __init omap3xxx_prcm_init(void)
{
if (cpu_is_omap34xx())
return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
return 0;
int ret = 0;
if (cpu_is_omap34xx()) {
ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
if (!ret)
irq_set_status_flags(omap_prcm_event_to_irq("io"),
IRQ_NOAUTOEN);
}
return ret;
}
subsys_initcall(omap3xxx_prcm_init);

67
arch/arm/mach-omap2/serial.c
View File

@ -57,6 +57,7 @@ struct omap_uart_state {
struct list_head node;
struct omap_hwmod *oh;
struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
static void __init
omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
uart->default_omap_uart_pads[0].name = rx_pad_name;
uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
OMAP_DEVICE_PAD_WAKEUP;
uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
OMAP_MUX_MODE0;
uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
uart->default_omap_uart_pads[1].name = tx_pad_name;
uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
OMAP_MUX_MODE0;
bdata->pads = uart->default_omap_uart_pads;
bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
}
static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
char *rx_fmt, *tx_fmt;
int uart_nr = bdata->id + 1;
if (bdata->id != 2) {
rx_fmt = "uart%d_rx.uart%d_rx";
tx_fmt = "uart%d_tx.uart%d_tx";
} else {
rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
}
snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
uart_nr, uart_nr);
snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
uart_nr, uart_nr);
if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
omap_mux_get_by_name
(tx_pad_name, &tx_partition, &tx_mux) >= 0) {
u16 tx_mode, rx_mode;
tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
/*
* Check if uart is used in default tx/rx mode i.e. in mux mode0
* if yes then configure rx pin for wake up capability
*/
if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
omap_serial_fill_uart_tx_rx_pads(bdata, uart);
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
struct omap_uart_state *uart)
{
}
#endif
static char *cmdline_find_option(char *str)
@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info)
bdata.pads = NULL;
bdata.pads_cnt = 0;
if (cpu_is_omap44xx() || cpu_is_omap34xx())
omap_serial_fill_default_pads(&bdata);
omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);

6
arch/arm/mach-omap2/usb-musb.c
View File

@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = {
};
static struct musb_hdrc_platform_data musb_plat = {
#ifdef CONFIG_USB_MUSB_OTG
#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
#else
.mode = MUSB_HOST,
#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
.mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,

2
arch/arm/mach-omap2/usb-tusb6010.c
View File

@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data,
printk(error, 3, status);
return status;
}
tusb_resources[2].start = irq + IH_GPIO_BASE;
tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {

2
arch/arm/mach-orion5x/include/mach/bridge-regs.h
View File

@ -35,5 +35,5 @@
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif

22
arch/arm/mach-orion5x/include/mach/io.h Normal file
View File

@ -0,0 +1,22 @@
/*
* arch/arm/mach-orion5x/include/mach/io.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#include <mach/orion5x.h>
#include <asm/sizes.h>
#define IO_SPACE_LIMIT SZ_2M
static inline void __iomem *__io(unsigned long addr)
{
return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
}
#define __io(a) __io(a)
#endif

1
arch/arm/mach-orion5x/include/mach/orion5x.h
View File

@ -82,6 +82,7 @@
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)

1
arch/arm/mach-shmobile/board-armadillo800eva.c
View File

@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END

1
arch/arm/mach-shmobile/board-kzm9d.c
View File

@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END

1
arch/arm/mach-shmobile/board-kzm9g.c
View File

@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END

3
arch/arm/mach-shmobile/board-mackerel.c
View File

@ -1512,6 +1512,9 @@ static void __init mackerel_init(void)
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
/* SDHI0 PORT172 card-detect IRQ26 */
gpio_request(GPIO_FN_IRQ26_172, NULL);
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);

8
arch/arm/mach-shmobile/clock-sh73a0.c
View File

@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = {
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
MSTP219,
MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
[MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */

7
arch/arm/mach-shmobile/intc-r8a7779.c
View File

@ -35,6 +35,9 @@
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
#define INT2NTSR0 0xfe700060
#define INT2NTSR1 0xfe700064
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void)
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
/* route all interrupts to ARM */
__raw_writel(0xffffffff, INT2NTSR0);
__raw_writel(0x3fffffff, INT2NTSR1);
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);

5
arch/arm/mach-shmobile/platsmp.c
View File

@ -25,7 +25,12 @@
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
#define is_r8a7779() machine_is_marzen()
#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
#else
#define is_emev2() (0)
#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{

2
arch/arm/mach-shmobile/setup-sh7372.c
View File

@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = {
},
};
#define SH7372_CHCLR 0x220
#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{

2
arch/arm/mach-spear13xx/include/mach/debug-macro.S
View File

@ -4,7 +4,7 @@
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

2
arch/arm/mach-spear13xx/include/mach/dma.h
View File

@ -4,7 +4,7 @@
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
* Viresh Kumar <viresh.kumar@st.com>
* Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any

Some files were not shown because too many files have changed in this diff Show More