e1000: Whitespace cleanup, cosmetic changes
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
This commit is contained in:
parent
699a712388
commit
8fc897b00a
5 changed files with 554 additions and 554 deletions
|
@ -242,7 +242,7 @@ struct e1000_adapter {
|
|||
struct timer_list watchdog_timer;
|
||||
struct timer_list phy_info_timer;
|
||||
struct vlan_group *vlgrp;
|
||||
uint16_t mng_vlan_id;
|
||||
uint16_t mng_vlan_id;
|
||||
uint32_t bd_number;
|
||||
uint32_t rx_buffer_len;
|
||||
uint32_t part_num;
|
||||
|
|
|
@ -428,12 +428,12 @@ e1000_get_regs(struct net_device *netdev,
|
|||
regs_buff[23] = regs_buff[18]; /* mdix mode */
|
||||
e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
|
||||
} else {
|
||||
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
|
||||
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
|
||||
regs_buff[13] = (uint32_t)phy_data; /* cable length */
|
||||
regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
||||
regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
||||
regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
||||
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
|
||||
e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
|
||||
regs_buff[17] = (uint32_t)phy_data; /* extended 10bt distance */
|
||||
regs_buff[18] = regs_buff[13]; /* cable polarity */
|
||||
regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
|
||||
|
@ -709,7 +709,6 @@ e1000_set_ringparam(struct net_device *netdev,
|
|||
}
|
||||
|
||||
clear_bit(__E1000_RESETTING, &adapter->flags);
|
||||
|
||||
return 0;
|
||||
err_setup_tx:
|
||||
e1000_free_all_rx_resources(adapter);
|
||||
|
@ -894,16 +893,17 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data)
|
|||
|
||||
*data = 0;
|
||||
|
||||
/* NOTE: we don't test MSI interrupts here, yet */
|
||||
/* Hook up test interrupt handler just for this test */
|
||||
if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED,
|
||||
netdev->name, netdev)) {
|
||||
shared_int = FALSE;
|
||||
} else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
|
||||
netdev->name, netdev)){
|
||||
netdev->name, netdev))
|
||||
shared_int = FALSE;
|
||||
else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED,
|
||||
netdev->name, netdev)) {
|
||||
*data = 1;
|
||||
return -1;
|
||||
}
|
||||
DPRINTK(PROBE,INFO, "testing %s interrupt\n",
|
||||
DPRINTK(HW, INFO, "testing %s interrupt\n",
|
||||
(shared_int ? "shared" : "unshared"));
|
||||
|
||||
/* Disable all the interrupts */
|
||||
|
@ -1269,11 +1269,10 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
|
|||
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x9140);
|
||||
/* autoneg off */
|
||||
e1000_write_phy_reg(&adapter->hw, PHY_CTRL, 0x8140);
|
||||
} else if (adapter->hw.phy_type == e1000_phy_gg82563) {
|
||||
} else if (adapter->hw.phy_type == e1000_phy_gg82563)
|
||||
e1000_write_phy_reg(&adapter->hw,
|
||||
GG82563_PHY_KMRN_MODE_CTRL,
|
||||
0x1CC);
|
||||
}
|
||||
|
||||
ctrl_reg = E1000_READ_REG(&adapter->hw, CTRL);
|
||||
|
||||
|
@ -1301,9 +1300,9 @@ e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
|
|||
}
|
||||
|
||||
if (adapter->hw.media_type == e1000_media_type_copper &&
|
||||
adapter->hw.phy_type == e1000_phy_m88) {
|
||||
adapter->hw.phy_type == e1000_phy_m88)
|
||||
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
|
||||
} else {
|
||||
else {
|
||||
/* Set the ILOS bit on the fiber Nic is half
|
||||
* duplex link is detected. */
|
||||
stat_reg = E1000_READ_REG(&adapter->hw, STATUS);
|
||||
|
@ -1439,11 +1438,10 @@ e1000_loopback_cleanup(struct e1000_adapter *adapter)
|
|||
case e1000_82546_rev_3:
|
||||
default:
|
||||
hw->autoneg = TRUE;
|
||||
if (hw->phy_type == e1000_phy_gg82563) {
|
||||
if (hw->phy_type == e1000_phy_gg82563)
|
||||
e1000_write_phy_reg(hw,
|
||||
GG82563_PHY_KMRN_MODE_CTRL,
|
||||
0x180);
|
||||
}
|
||||
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
|
||||
if (phy_reg & MII_CR_LOOPBACK) {
|
||||
phy_reg &= ~MII_CR_LOOPBACK;
|
||||
|
@ -1915,8 +1913,8 @@ static struct ethtool_ops e1000_ethtool_ops = {
|
|||
.get_regs = e1000_get_regs,
|
||||
.get_wol = e1000_get_wol,
|
||||
.set_wol = e1000_set_wol,
|
||||
.get_msglevel = e1000_get_msglevel,
|
||||
.set_msglevel = e1000_set_msglevel,
|
||||
.get_msglevel = e1000_get_msglevel,
|
||||
.set_msglevel = e1000_set_msglevel,
|
||||
.nway_reset = e1000_nway_reset,
|
||||
.get_link = ethtool_op_get_link,
|
||||
.get_eeprom_len = e1000_get_eeprom_len,
|
||||
|
@ -1924,17 +1922,17 @@ static struct ethtool_ops e1000_ethtool_ops = {
|
|||
.set_eeprom = e1000_set_eeprom,
|
||||
.get_ringparam = e1000_get_ringparam,
|
||||
.set_ringparam = e1000_set_ringparam,
|
||||
.get_pauseparam = e1000_get_pauseparam,
|
||||
.set_pauseparam = e1000_set_pauseparam,
|
||||
.get_rx_csum = e1000_get_rx_csum,
|
||||
.set_rx_csum = e1000_set_rx_csum,
|
||||
.get_tx_csum = e1000_get_tx_csum,
|
||||
.set_tx_csum = e1000_set_tx_csum,
|
||||
.get_sg = ethtool_op_get_sg,
|
||||
.set_sg = ethtool_op_set_sg,
|
||||
.get_pauseparam = e1000_get_pauseparam,
|
||||
.set_pauseparam = e1000_set_pauseparam,
|
||||
.get_rx_csum = e1000_get_rx_csum,
|
||||
.set_rx_csum = e1000_set_rx_csum,
|
||||
.get_tx_csum = e1000_get_tx_csum,
|
||||
.set_tx_csum = e1000_set_tx_csum,
|
||||
.get_sg = ethtool_op_get_sg,
|
||||
.set_sg = ethtool_op_set_sg,
|
||||
#ifdef NETIF_F_TSO
|
||||
.get_tso = ethtool_op_get_tso,
|
||||
.set_tso = e1000_set_tso,
|
||||
.get_tso = ethtool_op_get_tso,
|
||||
.set_tso = e1000_set_tso,
|
||||
#endif
|
||||
.self_test_count = e1000_diag_test_count,
|
||||
.self_test = e1000_diag_test,
|
||||
|
@ -1942,7 +1940,7 @@ static struct ethtool_ops e1000_ethtool_ops = {
|
|||
.phys_id = e1000_phys_id,
|
||||
.get_stats_count = e1000_get_stats_count,
|
||||
.get_ethtool_stats = e1000_get_ethtool_stats,
|
||||
.get_perm_addr = ethtool_op_get_perm_addr,
|
||||
.get_perm_addr = ethtool_op_get_perm_addr,
|
||||
};
|
||||
|
||||
void e1000_set_ethtool_ops(struct net_device *netdev)
|
||||
|
|
File diff suppressed because it is too large
Load diff
|
@ -336,9 +336,9 @@ uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw);
|
|||
#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
|
||||
|
||||
#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
|
||||
#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
|
||||
#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
|
||||
#define E1000_MNG_IAMT_MODE 0x3
|
||||
#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
|
||||
#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
|
||||
#define E1000_MNG_IAMT_MODE 0x3
|
||||
#define E1000_MNG_ICH_IAMT_MODE 0x2
|
||||
#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
|
||||
|
||||
|
@ -385,7 +385,7 @@ struct e1000_host_mng_dhcp_cookie{
|
|||
#endif
|
||||
|
||||
int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer,
|
||||
uint16_t length);
|
||||
uint16_t length);
|
||||
boolean_t e1000_check_mng_mode(struct e1000_hw *hw);
|
||||
boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
|
||||
|
||||
|
@ -523,7 +523,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw);
|
|||
|
||||
|
||||
/* 802.1q VLAN Packet Sizes */
|
||||
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
|
||||
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
|
||||
|
||||
/* Ethertype field values */
|
||||
#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
|
||||
|
@ -697,6 +697,7 @@ union e1000_rx_desc_packet_split {
|
|||
E1000_RXDEXT_STATERR_CXE | \
|
||||
E1000_RXDEXT_STATERR_RXE)
|
||||
|
||||
|
||||
/* Transmit Descriptor */
|
||||
struct e1000_tx_desc {
|
||||
uint64_t buffer_addr; /* Address of the descriptor's data buffer */
|
||||
|
@ -2086,7 +2087,7 @@ struct e1000_hw {
|
|||
#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
|
||||
* filtering */
|
||||
#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
|
||||
#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
|
||||
#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
|
||||
#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
|
||||
#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
|
||||
#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
|
||||
|
@ -2172,7 +2173,7 @@ struct e1000_host_command_info {
|
|||
|
||||
#define E1000_MDALIGN 4096
|
||||
|
||||
/* PCI-Ex registers */
|
||||
/* PCI-Ex registers*/
|
||||
|
||||
/* PCI-Ex Control Register */
|
||||
#define E1000_GCR_RXD_NO_SNOOP 0x00000001
|
||||
|
@ -2224,7 +2225,7 @@ struct e1000_host_command_info {
|
|||
#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */
|
||||
|
||||
/* EEPROM Commands - SPI */
|
||||
#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
|
||||
#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
|
||||
#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
|
||||
#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
|
||||
#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
|
||||
|
@ -3082,10 +3083,10 @@ struct e1000_host_command_info {
|
|||
|
||||
/* DSP Distance Register (Page 5, Register 26) */
|
||||
#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
|
||||
1 = 50-80M;
|
||||
2 = 80-110M;
|
||||
3 = 110-140M;
|
||||
4 = >140M */
|
||||
1 = 50-80M;
|
||||
2 = 80-110M;
|
||||
3 = 110-140M;
|
||||
4 = >140M */
|
||||
|
||||
/* Kumeran Mode Control Register (Page 193, Register 16) */
|
||||
#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
|
||||
|
|
|
@ -2439,10 +2439,9 @@ e1000_watchdog(unsigned long data)
|
|||
* disable receives in the ISR and
|
||||
* reset device here in the watchdog
|
||||
*/
|
||||
if (adapter->hw.mac_type == e1000_80003es2lan) {
|
||||
if (adapter->hw.mac_type == e1000_80003es2lan)
|
||||
/* reset device */
|
||||
schedule_work(&adapter->reset_task);
|
||||
}
|
||||
}
|
||||
|
||||
e1000_smartspeed(adapter);
|
||||
|
@ -3677,7 +3676,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter,
|
|||
E1000_DBG("%s: Receive packet consumed multiple"
|
||||
" buffers\n", netdev->name);
|
||||
/* recycle */
|
||||
buffer_info-> skb = skb;
|
||||
buffer_info->skb = skb;
|
||||
goto next_desc;
|
||||
}
|
||||
|
||||
|
|
Reference in a new issue