dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ARM: OMAP: musb: Add ti81xx phy power function 

Adding ti81xx_musb_phy_power() which will be used by musb driver through
its function pointer in board_data.

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Ajay Kumar Gupta 2011-12-13 10:50:58 -08:00 committed by Tony Lindgren
parent cada691f86
commit 8f718d2414
2 changed files with 67 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
arch/arm/mach-omap2/omap_phy_internal.c
View File

@ -260,3 +260,38 @@ void am35x_set_mode(u8 musb_mode)
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
}
void ti81xx_musb_phy_power(u8 on)
{
void __iomem *scm_base = NULL;
u32 usbphycfg;
scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
if (!scm_base) {
pr_err("system control module ioremap failed\n");
return;
}
usbphycfg = __raw_readl(scm_base + USBCTRL0);
if (on) {
if (cpu_is_ti816x()) {
usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
} else if (cpu_is_ti814x()) {
usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
| USBPHY_DPINPUT | USBPHY_DMINPUT);
usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
| USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
}
} else {
if (cpu_is_ti816x())
usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
else if (cpu_is_ti814x())
usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
}
__raw_writel(usbphycfg, scm_base + USBCTRL0);
iounmap(scm_base);
}

32
arch/arm/plat-omap/include/plat/usb.h
View File

@ -114,6 +114,7 @@ extern void am35x_musb_reset(void);
extern void am35x_musb_phy_power(u8 on);
extern void am35x_musb_clear_irq(void);
extern void am35x_set_mode(u8 musb_mode);
extern void ti81xx_musb_phy_power(u8 on);
/*
* FIXME correct answer depends on hmc_mode,
@ -273,6 +274,37 @@ static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
#define CONF2_OTGPWRDN (1 << 2)
#define CONF2_DATPOL (1 << 1)
/* TI81XX specific definitions */
#define USBCTRL0 0x620
#define USBSTAT0 0x624
/* TI816X PHY controls bits */
#define TI816X_USBPHY0_NORMAL_MODE (1 << 0)
#define TI816X_USBPHY_REFCLK_OSC (1 << 8)
/* TI814X PHY controls bits */
#define USBPHY_CM_PWRDN (1 << 0)
#define USBPHY_OTG_PWRDN (1 << 1)
#define USBPHY_CHGDET_DIS (1 << 2)
#define USBPHY_CHGDET_RSTRT (1 << 3)
#define USBPHY_SRCONDM (1 << 4)
#define USBPHY_SINKONDP (1 << 5)
#define USBPHY_CHGISINK_EN (1 << 6)
#define USBPHY_CHGVSRC_EN (1 << 7)
#define USBPHY_DMPULLUP (1 << 8)
#define USBPHY_DPPULLUP (1 << 9)
#define USBPHY_CDET_EXTCTL (1 << 10)
#define USBPHY_GPIO_MODE (1 << 12)
#define USBPHY_DPOPBUFCTL (1 << 13)
#define USBPHY_DMOPBUFCTL (1 << 14)
#define USBPHY_DPINPUT (1 << 15)
#define USBPHY_DMINPUT (1 << 16)
#define USBPHY_DPGPIO_PD (1 << 17)
#define USBPHY_DMGPIO_PD (1 << 18)
#define USBPHY_OTGVDET_EN (1 << 19)
#define USBPHY_OTGSESSEND_EN (1 << 20)
#define USBPHY_DATA_POLARITY (1 << 23)
#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
u32 omap1_usb1_init(unsigned nwires);