dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ARM: SoC fixes for 3.4-rc 

- at91, ux500, imx, omap and bcmring:
   - at91 fixes for =m driver build issues, irqdomain fixes and config
     dependency fixes
   - ux500 kconfig dependency fixes and a  smp wakeup bugfix
   - imx idle bugfix and build fix due to irq domain changes
   - omap uart pinmux fixes, softreset regression revert and misc fixes
   - bcmring build error regression fix
 
 - ux500 and imx had some small defconfig updates in this branch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPksdXAAoJEIwa5zzehBx3iqIP/ibJhM5QYWCXCoudOHouvXW7
 FALYsWTJodKf3qN0SQtty3RdmEKjdvCHGPcwtSEtjIc5xngCtYPEd5JWNl1u94nb
 f0+rhELfHljG+5XSyqnZfPmAN74ApvULl52hGXVudLjEwCB4uoYV5BN4c0dyr3Of
 Wm1+9HUyUo/WwXbE9UxxJkLDVsB+eAm2iOeAcerxCqsgKUzUqGP3fgp2eVJ7Q8LT
 f9tiSzaLeQnbYVymNeAiCzk3L9lKFx5r3QoxH2QOW6ieNUqAZC11X3L9anj30joG
 Ns1dMf5jGbWoSbHGMbff+PWj1sRxOzuoksjZ/jEZ2eXgNF4maoFrPqFZe6+o4K36
 pekjYwKfeuKdT9JXPSwJe3yQULxfWMTwvg2ZF86R9KOIcRGI2gwGDDTYZ4LOr8mp
 vQbOMWRGDNFxzWPZA9BfMDnG5AQxuoBlprnZQht2HqLar0dbHTx0qsqoxttOwenG
 GwnLG0ZiwsCkrXcAJ/PSSlHfmhEE37H8NsCzBXMeF1kpWwDJZROjEOdDQREuwtYB
 qcQ7GfQ9u8ysemMbXyrAM+SySsc9r8HXw/J2NMIlEBSdPba6CIgIQigUMYnWgFt8
 oJAPuTsT4/VIJbqCLkEOai3m5oaGllZ0zd5+SxzSbmmhybtFUrttjMP4WCUTqtuX
 lEKPTuNko5mb+2q6MEW0
 =mzPZ
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC fixes" from Olof Johansson:
 * at91, ux500, imx, omap and bcmring:
  - at91 fixes for =m driver build issues, irqdomain fixes and config
    dependency fixes
  - ux500 kconfig dependency fixes and a  smp wakeup bugfix
  - imx idle bugfix and build fix due to irq domain changes
  - omap uart pinmux fixes, softreset regression revert and misc fixes
  - bcmring build error regression fix

 * ux500 and imx had some small defconfig updates in this branch

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: bcmring: fix UART declarations
  ARM: imx: Fix imx5 idle logic bug
  ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()
  ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: OMAP1: DMTIMER: fix broken timer clock source selection
  ARM: OMAP: serial: Fix the ocp smart idlemode handling bug
  ARM: OMAP2+: UART: Fix incorrect population of default uart pads
  ARM: OMAP: sram: fix BUG in dpll code for !PM case
  dmaengine: Kconfig: fix Atmel at_hdmac entry
  USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt
  USB: ohci-at91: change annotations for probe/remove functions
  leds-atmel-pwm.c: Make pwmled_probe() __devinit
  ARM: at91: fix at91sam9261ek Ethernet dm9000 irq
  ARM: at91: fix rm9200ek flash size
  ARM: at91: remove empty at91_init_serial function
  ARM: at91: fix typo in at91_pmc_base assembly declaration
  ARM: at91: Export at91_matrix_base
  ARM: at91: Export at91_pmc_base
  ARM: at91: Export at91_ramc_base
  ARM: at91: Export at91_st_base
  ...
This commit is contained in:
Linus Torvalds 2012-04-21 12:45:52 -07:00
parent 126a3483d6 6842d4c2a9
commit 8f4f9d4d3c
28 changed files with 80 additions and 161 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/configs/imx_v4_v5_defconfig
View File

@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y

9
arch/arm/configs/u8500_defconfig
View File

@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
@ -39,7 +37,6 @@ CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_POWER_SUPPLY=y
CONFIG_AB8500_BM=y
CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y

1
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}

2
arch/arm/mach-at91/at91rm9200_time.c
View File

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <asm/mach/time.h>
@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
};
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
void __init at91rm9200_ioremap_st(u32 addr)
{

2
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE SZ_2M
#define EK_FLASH_SIZE SZ_8M
static struct physmap_flash_data ek_flash_data = {
.width = 2,

5
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
struct resource *r = &dm9000_resource[2];
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(0, 2, &dm9000_smc_config);
@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
platform_device_register(&dm9000_device);
}
#else

1
arch/arm/mach-at91/clock.c
View File

@ -35,6 +35,7 @@
#include "generic.h"
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
/*
* There's a lot more which can be done with clocks, including cpufreq

2
arch/arm/mach-at91/include/mach/at91_pmc.h
View File

@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
#define at91_pmc_write(field, value) \
__raw_writel(value, at91_pmc_base + field)
#else
.extern at91_aic_base
.extern at91_pmc_base
#endif
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */

2
arch/arm/mach-at91/setup.c
View File

@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
}
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{

4
arch/arm/mach-bcmring/core.c
View File

@ -52,8 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
static struct clk pll1_clk = {
.name = "PLL1",

6
arch/arm/mach-imx/imx27-dt.c
View File

@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
static int __init imx27_avic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base -= 32;
irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
NULL);
return 0;
}

2
arch/arm/mach-imx/mm-imx5.c
View File

@ -35,7 +35,7 @@ static void imx5_idle(void)
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake() != 0)
if (!tzic_enable_wake())
cpu_do_idle();
clk_disable(gpc_dvfs_clk);
}

1
arch/arm/mach-omap1/mux.c
View File

@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <plat/mux.h>

4
arch/arm/mach-omap1/timer.c
View File

@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
int n = (pdev->id - 1) << 1;
u32 l;
l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
__raw_writel(l, MOD_CONF_CTRL_1);
omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}

17
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
if (!oh)
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
return _ocp_softreset(oh);
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**

1
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View File

@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View File

@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

9
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
/*
* ISS needs 100 OCP clk cycles delay after a softreset before
* accessing sysconfig again.
* The lowest frequency at the moment for L3 bus is 100 MHz, so
* 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
*
* TODO: Indicate errata when available.
*/
.srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |

124
arch/arm/mach-omap2/serial.c
View File

@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
}
#else
@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static struct omap_device_pad default_uart1_pads[] __initdata = {
{
.name = "uart1_cts.uart1_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart1_rts.uart1_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_tx.uart1_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_rx.uart1_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart2_pads[] __initdata = {
{
.name = "uart2_cts.uart2_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart2_rts.uart2_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_tx.uart2_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_rx.uart2_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart3_pads[] __initdata = {
{
.name = "uart3_cts_rctx.uart3_cts_rctx",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart3_rts_sd.uart3_rts_sd",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_tx_irtx.uart3_tx_irtx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
{
.name = "gpmc_wait2.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "gpmc_wait3.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
},
};
static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
{
.name = "uart4_tx.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart4_rx.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
switch (bdata->id) {
case 0:
bdata->pads = default_uart1_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
break;
case 1:
bdata->pads = default_uart2_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
break;
case 2:
bdata->pads = default_uart3_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
break;
case 3:
if (cpu_is_omap44xx()) {
bdata->pads = default_omap4_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap4_uart4_pads);
} else if (cpu_is_omap3630()) {
bdata->pads = default_omap36xx_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap36xx_uart4_pads);
}
break;
default:
break;
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}

1
arch/arm/mach-ux500/Kconfig
View File

@ -17,6 +17,7 @@ config UX500_SOC_DB5500
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ

2
arch/arm/mach-ux500/platsmp.c
View File

@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
smp_send_reschedule(cpu);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {

4
arch/arm/plat-omap/include/plat/omap_hwmod.h
View File

@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
/**

12
arch/arm/plat-omap/sram.c
View File

@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
#endif /* CONFIG_PM */
#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
#endif
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{

5
drivers/dma/Kconfig
View File

@ -91,11 +91,10 @@ config DW_DMAC
config AT_HDMAC
tristate "Atmel AHB DMA support"
depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
depends on ARCH_AT91
select DMA_ENGINE
help
Support the Atmel AHB DMA controller. This can be integrated in
chips such as the Atmel AT91SAM9RL.
Support the Atmel AHB DMA controller.
config FSL_DMA
tristate "Freescale Elo and Elo Plus DMA support"

2
drivers/leds/leds-atmel-pwm.c
View File

@ -35,7 +35,7 @@ static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
* NOTE: we reuse the platform_data structure of GPIO leds,
* but repurpose its "gpio" number as a PWM channel number.
*/
static int __init pwmled_probe(struct platform_device *pdev)
static int __devinit pwmled_probe(struct platform_device *pdev)
{
const struct gpio_led_platform_data *pdata;
struct pwmled *leds;

8
drivers/usb/gadget/at91_udc.c
View File

@ -1863,8 +1863,8 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
if (request_irq(udc->board.vbus_pin, at91_vbus_irq,
0, driver_name, udc)) {
if (request_irq(gpio_to_irq(udc->board.vbus_pin),
at91_vbus_irq, 0, driver_name, udc)) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
retval = -EBUSY;
@ -1886,7 +1886,7 @@ static int __devinit at91udc_probe(struct platform_device *pdev)
return 0;
fail4:
if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
free_irq(udc->board.vbus_pin, udc);
free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
fail3:
if (gpio_is_valid(udc->board.vbus_pin))
gpio_free(udc->board.vbus_pin);
@ -1924,7 +1924,7 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
if (gpio_is_valid(udc->board.vbus_pin)) {
free_irq(udc->board.vbus_pin, udc);
free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
gpio_free(udc->board.vbus_pin);
}
free_irq(udc->udp_irq, udc);

12
drivers/usb/host/ohci-at91.c
View File

@ -94,7 +94,7 @@ static void at91_stop_hc(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
static void __devexit usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
/* configure so an HC device and id are always provided */
/* always called with process context; sleeping is OK */
@ -108,7 +108,7 @@ static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
* then invokes the start() method for the HCD associated with it
* through the hotplug entry's driver_data.
*/
static int usb_hcd_at91_probe(const struct hc_driver *driver,
static int __devinit usb_hcd_at91_probe(const struct hc_driver *driver,
struct platform_device *pdev)
{
int retval;
@ -203,7 +203,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
* context, "rmmod" or something similar.
*
*/
static void usb_hcd_at91_remove(struct usb_hcd *hcd,
static void __devexit usb_hcd_at91_remove(struct usb_hcd *hcd,
struct platform_device *pdev)
{
usb_remove_hcd(hcd);
@ -545,7 +545,7 @@ static int __devinit ohci_at91_of_init(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata;
int i;
@ -620,7 +620,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
}
static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
static int __devexit ohci_hcd_at91_drv_remove(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
@ -696,7 +696,7 @@ MODULE_ALIAS("platform:at91_ohci");
static struct platform_driver ohci_hcd_at91_driver = {
.probe = ohci_hcd_at91_drv_probe,
.remove = ohci_hcd_at91_drv_remove,
.remove = __devexit_p(ohci_hcd_at91_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
.suspend = ohci_hcd_at91_drv_suspend,
.resume = ohci_hcd_at91_drv_resume,