dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

net: fsl: fec: handle 10Mbps speed in RMII mode 

when the link is 10 Mbps and the mode is RMII, it's necessary
to set FRCONT to 1 in MIIGSK_CFGR to divide the RMII source
clock by 10 in order to support 10 Mbps operations.

Signed-off-by: Eric Bénard <eric@eukrea.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Eric Benard 2012-01-12 06:10:28 +00:00 committed by David S. Miller
parent 25cecd7e35
commit 8d82f219c2
2 changed files with 10 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/net/ethernet/freescale/fec.c
View File

@ -476,6 +476,7 @@ fec_restart(struct net_device *ndev, int duplex)
} else {
#ifdef FEC_MIIGSK_ENR
if (id_entry->driver_data & FEC_QUIRK_USE_GASKET) {
u32 cfgr;
/* disable the gasket and wait */
writel(0, fep->hwp + FEC_MIIGSK_ENR);
while (readl(fep->hwp + FEC_MIIGSK_ENR) & 4)
@ -486,9 +487,11 @@ fec_restart(struct net_device *ndev, int duplex)
* RMII, 50 MHz, no loopback, no echo
* MII, 25 MHz, no loopback, no echo
*/
writel((fep->phy_interface == PHY_INTERFACE_MODE_RMII) ?
1 : 0, fep->hwp + FEC_MIIGSK_CFGR);
cfgr = (fep->phy_interface == PHY_INTERFACE_MODE_RMII)
? BM_MIIGSK_CFGR_RMII : BM_MIIGSK_CFGR_MII;
if (fep->phy_dev && fep->phy_dev->speed == SPEED_10)
cfgr |= BM_MIIGSK_CFGR_FRCONT_10M;
writel(cfgr, fep->hwp + FEC_MIIGSK_CFGR);
/* re-enable the gasket */
writel(2, fep->hwp + FEC_MIIGSK_ENR);

4
drivers/net/ethernet/freescale/fec.h
View File

@ -47,6 +47,10 @@
#define FEC_MIIGSK_CFGR 0x300 /* MIIGSK Configuration reg */
#define FEC_MIIGSK_ENR 0x308 /* MIIGSK Enable reg */
#define BM_MIIGSK_CFGR_MII 0x00
#define BM_MIIGSK_CFGR_RMII 0x01
#define BM_MIIGSK_CFGR_FRCONT_10M 0x40
#else
#define FEC_ECNTRL 0x000 /* Ethernet control reg */