i2c-nomadik: cosmetic coding style corrections
This fixes a number of whitespace and punctuation problems around the Nomadik I2C driver. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
This commit is contained in:
Jonas Aaberg
Ben Dooks
parent
1fdb24e969
commit
8abf6fbbd2
|
|
@ -63,11 +63,11 @@
|
|||
/* Master controller (MCR) register */
|
||||
#define I2C_MCR_OP (0x1 << 0) /* Operation */
|
||||
#define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */
|
||||
#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
|
||||
#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
|
||||
#define I2C_MCR_SB (0x1 << 11) /* Extended address */
|
||||
#define I2C_MCR_AM (0x3 << 12) /* Address type */
|
||||
#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
|
||||
#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
|
||||
#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
|
||||
#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
|
||||
|
||||
/* Status register (SR) */
|
||||
#define I2C_SR_OP (0x3 << 0) /* Operation */
|
||||
|
|
@ -77,7 +77,7 @@
|
|||
#define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */
|
||||
|
||||
/* Interrupt mask set/clear (IMSCR) bits */
|
||||
#define I2C_IT_TXFE (0x1 << 0)
|
||||
#define I2C_IT_TXFE (0x1 << 0)
|
||||
#define I2C_IT_TXFNE (0x1 << 1)
|
||||
#define I2C_IT_TXFF (0x1 << 2)
|
||||
#define I2C_IT_TXFOVR (0x1 << 3)
|
||||
|
|
@ -135,31 +135,31 @@ struct i2c_nmk_client {
|
|||
};
|
||||
|
||||
/**
|
||||
* struct nmk_i2c_dev - private data structure of the controller
|
||||
* @pdev: parent platform device
|
||||
* @adap: corresponding I2C adapter
|
||||
* @irq: interrupt line for the controller
|
||||
* @virtbase: virtual io memory area
|
||||
* @clk: hardware i2c block clock
|
||||
* @cfg: machine provided controller configuration
|
||||
* @cli: holder of client specific data
|
||||
* @stop: stop condition
|
||||
* @xfer_complete: acknowledge completion for a I2C message
|
||||
* @result: controller propogated result
|
||||
* @regulator: pointer to i2c regulator
|
||||
* @busy: Busy doing transfer
|
||||
* struct nmk_i2c_dev - private data structure of the controller.
|
||||
* @pdev: parent platform device.
|
||||
* @adap: corresponding I2C adapter.
|
||||
* @irq: interrupt line for the controller.
|
||||
* @virtbase: virtual io memory area.
|
||||
* @clk: hardware i2c block clock.
|
||||
* @cfg: machine provided controller configuration.
|
||||
* @cli: holder of client specific data.
|
||||
* @stop: stop condition.
|
||||
* @xfer_complete: acknowledge completion for a I2C message.
|
||||
* @result: controller propogated result.
|
||||
* @regulator: pointer to i2c regulator.
|
||||
* @busy: Busy doing transfer.
|
||||
*/
|
||||
struct nmk_i2c_dev {
|
||||
struct platform_device *pdev;
|
||||
struct i2c_adapter adap;
|
||||
int irq;
|
||||
struct i2c_adapter adap;
|
||||
int irq;
|
||||
void __iomem *virtbase;
|
||||
struct clk *clk;
|
||||
struct nmk_i2c_controller cfg;
|
||||
struct i2c_nmk_client cli;
|
||||
int stop;
|
||||
int stop;
|
||||
struct completion xfer_complete;
|
||||
int result;
|
||||
int result;
|
||||
struct regulator *regulator;
|
||||
bool busy;
|
||||
};
|
||||
|
|
@ -217,8 +217,9 @@ static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
|
|||
}
|
||||
}
|
||||
|
||||
dev_err(&dev->pdev->dev, "flushing operation timed out "
|
||||
"giving up after %d attempts", LOOP_ATTEMPTS);
|
||||
dev_err(&dev->pdev->dev,
|
||||
"flushing operation timed out giving up after %d attempts",
|
||||
LOOP_ATTEMPTS);
|
||||
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
|
@ -270,7 +271,7 @@ exit:
|
|||
}
|
||||
|
||||
/* enable peripheral, master mode operation */
|
||||
#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
|
||||
#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
|
||||
|
||||
/**
|
||||
* load_i2c_mcr_reg() - load the MCR register
|
||||
|
|
@ -363,8 +364,8 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
|
|||
* and high speed (up to 3.4 Mb/s)
|
||||
*/
|
||||
if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
|
||||
dev_err(&dev->pdev->dev, "do not support this mode "
|
||||
"defaulting to std. mode\n");
|
||||
dev_err(&dev->pdev->dev,
|
||||
"do not support this mode defaulting to std. mode\n");
|
||||
brcr2 = i2c_clk/(100000 * 2) & 0xffff;
|
||||
writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
|
||||
writel(I2C_FREQ_MODE_STANDARD << 4,
|
||||
|
|
@ -423,7 +424,7 @@ static int read_i2c(struct nmk_i2c_dev *dev)
|
|||
|
||||
if (timeout < 0) {
|
||||
dev_err(&dev->pdev->dev,
|
||||
"wait_for_completion_timeout"
|
||||
"wait_for_completion_timeout "
|
||||
"returned %d waiting for event\n", timeout);
|
||||
status = timeout;
|
||||
}
|
||||
|
|
@ -556,8 +557,8 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
|
|||
if (((i2c_sr >> 2) & 0x3) == 0x3) {
|
||||
/* get the abort cause */
|
||||
cause = (i2c_sr >> 4) & 0x7;
|
||||
dev_err(&dev->pdev->dev, "%s\n", cause
|
||||
>= ARRAY_SIZE(abort_causes) ?
|
||||
dev_err(&dev->pdev->dev, "%s\n",
|
||||
cause >= ARRAY_SIZE(abort_causes) ?
|
||||
"unknown reason" :
|
||||
abort_causes[cause]);
|
||||
}
|
||||
|
|
@ -582,13 +583,13 @@ static int nmk_i2c_xfer_one(struct nmk_i2c_dev *dev, u16 flags)
|
|||
*
|
||||
* NOTE:
|
||||
* READ TRANSFER : We impose a restriction of the first message to be the
|
||||
* index message for any read transaction.
|
||||
* - a no index is coded as '0',
|
||||
* - 2byte big endian index is coded as '3'
|
||||
* !!! msg[0].buf holds the actual index.
|
||||
* This is compatible with generic messages of smbus emulator
|
||||
* that send a one byte index.
|
||||
* eg. a I2C transation to read 2 bytes from index 0
|
||||
* index message for any read transaction.
|
||||
* - a no index is coded as '0',
|
||||
* - 2byte big endian index is coded as '3'
|
||||
* !!! msg[0].buf holds the actual index.
|
||||
* This is compatible with generic messages of smbus emulator
|
||||
* that send a one byte index.
|
||||
* eg. a I2C transation to read 2 bytes from index 0
|
||||
* idx = 0;
|
||||
* msg[0].addr = client->addr;
|
||||
* msg[0].flags = 0x0;
|
||||
|
|
@ -644,8 +645,8 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
|
|||
|
||||
for (i = 0; i < num_msgs; i++) {
|
||||
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
|
||||
dev_err(&dev->pdev->dev, "10 bit addressing"
|
||||
"not supported\n");
|
||||
dev_err(&dev->pdev->dev,
|
||||
"10 bit addressing not supported\n");
|
||||
|
||||
status = -EINVAL;
|
||||
goto out;
|
||||
|
|
@ -789,8 +790,9 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
|
|||
|
||||
if (dev->cli.count) {
|
||||
dev->result = -EIO;
|
||||
dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
|
||||
"xfered\n", dev->cli.count);
|
||||
dev_err(&dev->pdev->dev,
|
||||
"%lu bytes still remain to be xfered\n",
|
||||
dev->cli.count);
|
||||
(void) init_hw(dev);
|
||||
}
|
||||
complete(&dev->xfer_complete);
|
||||
|
|
@ -923,7 +925,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
|
|||
}
|
||||
|
||||
if (request_mem_region(res->start, resource_size(res),
|
||||
DRIVER_NAME "I/O region") == NULL) {
|
||||
DRIVER_NAME "I/O region") == NULL) {
|
||||
ret = -EBUSY;
|
||||
goto err_no_region;
|
||||
}
|
||||
|
|
@ -980,8 +982,9 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
|
|||
|
||||
i2c_set_adapdata(adap, dev);
|
||||
|
||||
dev_info(&pdev->dev, "initialize %s on virtual "
|
||||
"base %p\n", adap->name, dev->virtbase);
|
||||
dev_info(&pdev->dev,
|
||||
"initialize %s on virtual base %p\n",
|
||||
adap->name, dev->virtbase);
|
||||
|
||||
ret = i2c_add_numbered_adapter(adap);
|
||||
if (ret) {
|
||||
|
|
|
|||
Reference in New Issue