Merge branch 'topic/cleanup-s3c24xx' into next/cleanup-s3c24xx
Conflicts: arch/arm/mach-s3c24xx/include/mach/system.h
This commit is contained in:
Kukjin Kim
commit
880bcd4a83
|
|
@ -763,22 +763,21 @@ config ARCH_SA1100
|
|||
help
|
||||
Support for StrongARM 11x0 based boards.
|
||||
|
||||
config ARCH_S3C2410
|
||||
bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
|
||||
config ARCH_S3C24XX
|
||||
bool "Samsung S3C24XX SoCs"
|
||||
select GENERIC_GPIO
|
||||
select ARCH_HAS_CPUFREQ
|
||||
select HAVE_CLK
|
||||
select CLKDEV_LOOKUP
|
||||
select ARCH_USES_GETTIMEOFFSET
|
||||
select HAVE_S3C2410_I2C if I2C
|
||||
select HAVE_S3C_RTC if RTC_CLASS
|
||||
select HAVE_S3C2410_WATCHDOG if WATCHDOG
|
||||
help
|
||||
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
|
||||
BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
|
||||
the Samsung SMDK2410 development board (and derivatives).
|
||||
|
||||
Note, the S3C2416 and the S3C2450 are so close that they even share
|
||||
the same SoC ID code. This means that there is no separate machine
|
||||
directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
|
||||
Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
|
||||
and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
|
||||
(<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
|
||||
Samsung SMDK2410 development board (and derivatives).
|
||||
|
||||
config ARCH_S3C64XX
|
||||
bool "Samsung S3C64XX"
|
||||
|
|
@ -1066,12 +1065,11 @@ source "arch/arm/plat-s5p/Kconfig"
|
|||
|
||||
source "arch/arm/plat-spear/Kconfig"
|
||||
|
||||
if ARCH_S3C2410
|
||||
source "arch/arm/mach-s3c2410/Kconfig"
|
||||
source "arch/arm/mach-s3c24xx/Kconfig"
|
||||
if ARCH_S3C24XX
|
||||
source "arch/arm/mach-s3c2412/Kconfig"
|
||||
source "arch/arm/mach-s3c2416/Kconfig"
|
||||
source "arch/arm/mach-s3c2440/Kconfig"
|
||||
source "arch/arm/mach-s3c2443/Kconfig"
|
||||
endif
|
||||
|
||||
if ARCH_S3C64XX
|
||||
|
|
@ -1588,7 +1586,7 @@ source kernel/Kconfig.preempt
|
|||
|
||||
config HZ
|
||||
int
|
||||
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
|
||||
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
|
||||
ARCH_S5PV210 || ARCH_EXYNOS4
|
||||
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
|
||||
default AT91_TIMER_HZ if ARCH_AT91
|
||||
|
|
@ -2114,7 +2112,7 @@ config CPU_FREQ_S3C
|
|||
|
||||
config CPU_FREQ_S3C24XX
|
||||
bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
|
||||
depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
|
||||
depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
|
||||
select CPU_FREQ_S3C
|
||||
help
|
||||
This enables the CPUfreq driver for the Samsung S3C24XX family
|
||||
|
|
|
|||
|
|
@ -174,7 +174,7 @@ machine-$(CONFIG_ARCH_PRIMA2) := prima2
|
|||
machine-$(CONFIG_ARCH_PXA) := pxa
|
||||
machine-$(CONFIG_ARCH_REALVIEW) := realview
|
||||
machine-$(CONFIG_ARCH_RPC) := rpc
|
||||
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443
|
||||
machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440
|
||||
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
|
||||
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
|
||||
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
|
||||
|
|
|
|||
|
|
@ -58,7 +58,7 @@
|
|||
add \rb, \rb, #0x00010000 @ Ser1
|
||||
#endif
|
||||
.endm
|
||||
#elif defined(CONFIG_ARCH_S3C2410)
|
||||
#elif defined(CONFIG_ARCH_S3C24XX)
|
||||
.macro loadsp, rb, tmp
|
||||
mov \rb, #0x50000000
|
||||
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ CONFIG_MODULE_UNLOAD=y
|
|||
CONFIG_MODULE_FORCE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_BLK_DEV_INTEGRITY=y
|
||||
CONFIG_ARCH_S3C2410=y
|
||||
CONFIG_ARCH_S3C24XX=y
|
||||
CONFIG_S3C_ADC=y
|
||||
CONFIG_S3C24XX_PWM=y
|
||||
CONFIG_MACH_MINI2440=y
|
||||
|
|
|
|||
|
|
@ -3,40 +3,47 @@ CONFIG_SYSVIPC=y
|
|||
CONFIG_IKCONFIG=m
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_SYSFS_DEPRECATED_V2=y
|
||||
CONFIG_BLK_DEV_INITRD=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_S3C2410=y
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
CONFIG_SOLARIS_X86_PARTITION=y
|
||||
CONFIG_ARCH_S3C24XX=y
|
||||
CONFIG_S3C_BOOT_ERROR_RESET=y
|
||||
CONFIG_S3C_ADC=y
|
||||
CONFIG_S3C24XX_PWM=y
|
||||
CONFIG_ARCH_SMDK2410=y
|
||||
CONFIG_CPU_S3C2412=y
|
||||
CONFIG_CPU_S3C2416=y
|
||||
CONFIG_CPU_S3C2440=y
|
||||
CONFIG_CPU_S3C2442=y
|
||||
CONFIG_CPU_S3C2443=y
|
||||
CONFIG_MACH_AML_M5900=y
|
||||
CONFIG_ARCH_BAST=y
|
||||
CONFIG_ARCH_H1940=y
|
||||
CONFIG_MACH_N30=y
|
||||
CONFIG_ARCH_BAST=y
|
||||
CONFIG_MACH_OTOM=y
|
||||
CONFIG_MACH_AML_M5900=y
|
||||
CONFIG_MACH_QT2410=y
|
||||
CONFIG_ARCH_SMDK2410=y
|
||||
CONFIG_MACH_TCT_HAMMER=y
|
||||
CONFIG_MACH_VR1000=y
|
||||
CONFIG_MACH_QT2410=y
|
||||
CONFIG_MACH_JIVE=y
|
||||
CONFIG_MACH_SMDK2412=y
|
||||
CONFIG_MACH_VSTMS=y
|
||||
CONFIG_MACH_SMDK2416=y
|
||||
CONFIG_MACH_ANUBIS=y
|
||||
CONFIG_MACH_NEO1973_GTA02=y
|
||||
CONFIG_MACH_AT2440EVB=y
|
||||
CONFIG_MACH_MINI2440=y
|
||||
CONFIG_MACH_NEXCODER_2440=y
|
||||
CONFIG_MACH_OSIRIS=y
|
||||
CONFIG_MACH_OSIRIS_DVS=m
|
||||
CONFIG_MACH_RX3715=y
|
||||
CONFIG_ARCH_S3C2440=y
|
||||
CONFIG_MACH_NEXCODER_2440=y
|
||||
CONFIG_SMDK2440_CPU2442=y
|
||||
CONFIG_MACH_AT2440EVB=y
|
||||
CONFIG_MACH_MINI2440=y
|
||||
CONFIG_MACH_NEO1973_GTA02=y
|
||||
CONFIG_MACH_RX1950=y
|
||||
CONFIG_SMDK2440_CPU2442=y
|
||||
CONFIG_MACH_SMDK2443=y
|
||||
# CONFIG_ARM_THUMB is not set
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
|
|
@ -45,7 +52,6 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
|
|||
CONFIG_FPE_NWFPE=y
|
||||
CONFIG_FPE_NWFPE_XP=y
|
||||
CONFIG_BINFMT_AOUT=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_APM_EMULATION=m
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
|
|
@ -58,7 +64,6 @@ CONFIG_IP_PNP=y
|
|||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_IP_PNP_BOOTP=y
|
||||
CONFIG_NET_IPIP=m
|
||||
CONFIG_NET_IPGRE=m
|
||||
CONFIG_INET_AH=m
|
||||
CONFIG_INET_ESP=m
|
||||
CONFIG_INET_IPCOMP=m
|
||||
|
|
@ -80,7 +85,6 @@ CONFIG_IPV6_MIP6=m
|
|||
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
|
||||
CONFIG_IPV6_TUNNEL=m
|
||||
CONFIG_NETFILTER=y
|
||||
CONFIG_NETFILTER_NETLINK_QUEUE=m
|
||||
CONFIG_NF_CONNTRACK=m
|
||||
CONFIG_NF_CONNTRACK_EVENTS=y
|
||||
CONFIG_NF_CT_PROTO_DCCP=m
|
||||
|
|
@ -138,7 +142,6 @@ CONFIG_IP_VS=m
|
|||
CONFIG_NF_CONNTRACK_IPV4=m
|
||||
CONFIG_IP_NF_QUEUE=m
|
||||
CONFIG_IP_NF_IPTABLES=m
|
||||
CONFIG_IP_NF_MATCH_ADDRTYPE=m
|
||||
CONFIG_IP_NF_MATCH_AH=m
|
||||
CONFIG_IP_NF_MATCH_ECN=m
|
||||
CONFIG_IP_NF_MATCH_TTL=m
|
||||
|
|
@ -150,7 +153,6 @@ CONFIG_NF_NAT=m
|
|||
CONFIG_IP_NF_TARGET_MASQUERADE=m
|
||||
CONFIG_IP_NF_TARGET_NETMAP=m
|
||||
CONFIG_IP_NF_TARGET_REDIRECT=m
|
||||
CONFIG_NF_NAT_SNMP_BASIC=m
|
||||
CONFIG_IP_NF_MANGLE=m
|
||||
CONFIG_IP_NF_TARGET_CLUSTERIP=m
|
||||
CONFIG_IP_NF_TARGET_ECN=m
|
||||
|
|
@ -177,8 +179,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m
|
|||
CONFIG_IP6_NF_MANGLE=m
|
||||
CONFIG_IP6_NF_RAW=m
|
||||
CONFIG_BT=m
|
||||
CONFIG_BT_L2CAP=m
|
||||
CONFIG_BT_SCO=m
|
||||
CONFIG_BT_RFCOMM=m
|
||||
CONFIG_BT_RFCOMM_TTY=y
|
||||
CONFIG_BT_BNEP=m
|
||||
|
|
@ -199,7 +199,6 @@ CONFIG_MAC80211_MESH=y
|
|||
CONFIG_MAC80211_LEDS=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_PARTITIONS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS=y
|
||||
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
|
|
@ -221,9 +220,6 @@ CONFIG_BLK_DEV_NBD=m
|
|||
CONFIG_BLK_DEV_UB=m
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_ATA_OVER_ETH=m
|
||||
CONFIG_EEPROM_AT25=m
|
||||
CONFIG_EEPROM_LEGACY=m
|
||||
CONFIG_EEPROM_93CX6=m
|
||||
CONFIG_IDE=y
|
||||
CONFIG_BLK_DEV_IDECD=y
|
||||
CONFIG_BLK_DEV_IDETAPE=m
|
||||
|
|
@ -240,7 +236,6 @@ CONFIG_SCSI_MULTI_LUN=y
|
|||
CONFIG_SCSI_CONSTANTS=y
|
||||
CONFIG_SCSI_SCAN_ASYNC=y
|
||||
CONFIG_NETDEVICES=y
|
||||
CONFIG_NET_ETHERNET=y
|
||||
CONFIG_DM9000=y
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_MOUSE_APPLETOUCH=m
|
||||
|
|
@ -274,7 +269,6 @@ CONFIG_JOYSTICK_XPAD_LEDS=y
|
|||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
|
||||
CONFIG_INPUT_MISC=y
|
||||
CONFIG_INPUT_ATI_REMOTE=m
|
||||
CONFIG_INPUT_ATI_REMOTE2=m
|
||||
CONFIG_INPUT_KEYSPAN_REMOTE=m
|
||||
CONFIG_INPUT_POWERMATE=m
|
||||
|
|
@ -300,7 +294,6 @@ CONFIG_I2C_SIMTEC=y
|
|||
CONFIG_SPI=y
|
||||
CONFIG_SPI_GPIO=m
|
||||
CONFIG_SPI_S3C24XX=m
|
||||
CONFIG_SPI_S3C24XX_GPIO=m
|
||||
CONFIG_SPI_SPIDEV=m
|
||||
CONFIG_SPI_TLE62X0=m
|
||||
CONFIG_SENSORS_LM75=m
|
||||
|
|
@ -315,7 +308,6 @@ CONFIG_FB_MODE_HELPERS=y
|
|||
CONFIG_FB_S3C2410=y
|
||||
CONFIG_FB_SM501=y
|
||||
CONFIG_BACKLIGHT_PWM=m
|
||||
# CONFIG_VGA_CONSOLE is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
CONFIG_SOUND=y
|
||||
CONFIG_SND=y
|
||||
|
|
@ -330,10 +322,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
|
|||
CONFIG_SND_USB_AUDIO=m
|
||||
CONFIG_SND_USB_CAIAQ=m
|
||||
CONFIG_SND_SOC=y
|
||||
CONFIG_SND_S3C24XX_SOC=y
|
||||
CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
|
||||
CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
|
||||
CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
|
||||
# CONFIG_USB_HID is not set
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_DEVICEFS=y
|
||||
|
|
@ -387,9 +375,7 @@ CONFIG_MMC_TEST=m
|
|||
CONFIG_MMC_SDHCI=m
|
||||
CONFIG_MMC_SPI=m
|
||||
CONFIG_MMC_S3C=y
|
||||
CONFIG_LEDS_CLASS=m
|
||||
CONFIG_LEDS_S3C24XX=m
|
||||
CONFIG_LEDS_H1940=m
|
||||
CONFIG_LEDS_PCA9532=m
|
||||
CONFIG_LEDS_GPIO=m
|
||||
CONFIG_LEDS_PCA955X=m
|
||||
|
|
@ -410,8 +396,6 @@ CONFIG_EXT3_FS=y
|
|||
CONFIG_EXT3_FS_POSIX_ACL=y
|
||||
CONFIG_EXT4_FS=m
|
||||
CONFIG_EXT4_FS_POSIX_ACL=y
|
||||
CONFIG_INOTIFY=y
|
||||
CONFIG_AUTOFS_FS=m
|
||||
CONFIG_AUTOFS4_FS=m
|
||||
CONFIG_FUSE_FS=m
|
||||
CONFIG_ISO9660_FS=y
|
||||
|
|
@ -436,9 +420,6 @@ CONFIG_NFSD=m
|
|||
CONFIG_NFSD_V3_ACL=y
|
||||
CONFIG_NFSD_V4=y
|
||||
CONFIG_CIFS=m
|
||||
CONFIG_PARTITION_ADVANCED=y
|
||||
CONFIG_BSD_DISKLABEL=y
|
||||
CONFIG_SOLARIS_X86_PARTITION=y
|
||||
CONFIG_NLS_CODEPAGE_437=y
|
||||
CONFIG_NLS_CODEPAGE_737=m
|
||||
CONFIG_NLS_CODEPAGE_775=m
|
||||
|
|
@ -481,9 +462,7 @@ CONFIG_MAGIC_SYSRQ=y
|
|||
CONFIG_DEBUG_KERNEL=y
|
||||
CONFIG_DEBUG_MUTEXES=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
|
||||
CONFIG_SYSCTL_SYSCALL_CHECK=y
|
||||
CONFIG_DEBUG_USER=y
|
||||
CONFIG_DEBUG_ERRORS=y
|
||||
CONFIG_DEBUG_LL=y
|
||||
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|
||||
|
|
|
|||
|
|
@ -14,7 +14,7 @@ CONFIG_SLOB=y
|
|||
CONFIG_MODULES=y
|
||||
CONFIG_MODULE_UNLOAD=y
|
||||
# CONFIG_BLK_DEV_BSG is not set
|
||||
CONFIG_ARCH_S3C2410=y
|
||||
CONFIG_ARCH_S3C24XX=y
|
||||
CONFIG_MACH_TCT_HAMMER=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
|
|
|
|||
|
|
@ -2,42 +2,6 @@
|
|||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
config CPU_S3C2410
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM920T
|
||||
select S3C2410_CLOCK
|
||||
select CPU_LLSERIAL_S3C2410
|
||||
select S3C2410_PM if PM
|
||||
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
|
||||
help
|
||||
Support for S3C2410 and S3C2410A family from the S3C24XX line
|
||||
of Samsung Mobile CPUs.
|
||||
|
||||
config CPU_S3C2410_DMA
|
||||
bool
|
||||
depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442)
|
||||
default y if CPU_S3C2410 || CPU_S3C2442
|
||||
help
|
||||
DMA device selection for S3C2410 and compatible CPUs
|
||||
|
||||
config S3C2410_PM
|
||||
bool
|
||||
help
|
||||
Power Management code common to S3C2410 and better
|
||||
|
||||
config SIMTEC_NOR
|
||||
bool
|
||||
help
|
||||
Internal node to specify machine has simtec NOR mapping
|
||||
|
||||
config MACH_BAST_IDE
|
||||
bool
|
||||
select HAVE_PATA_PLATFORM
|
||||
help
|
||||
Internal node for machines with an BAST style IDE
|
||||
interface
|
||||
|
||||
# cpu frequency scaling support
|
||||
|
||||
config S3C2410_CPUFREQ
|
||||
|
|
@ -54,121 +18,3 @@ config S3C2410_PLLTABLE
|
|||
help
|
||||
Select the PLL table for the S3C2410
|
||||
|
||||
menu "S3C2410 Machines"
|
||||
|
||||
config ARCH_SMDK2410
|
||||
bool "SMDK2410/A9M2410"
|
||||
select CPU_S3C2410
|
||||
select MACH_SMDK
|
||||
help
|
||||
Say Y here if you are using the SMDK2410 or the derived module A9M2410
|
||||
<http://www.fsforth.de>
|
||||
|
||||
config ARCH_H1940
|
||||
bool "IPAQ H1940"
|
||||
select CPU_S3C2410
|
||||
select PM_H1940 if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C2410_SETUP_TS
|
||||
help
|
||||
Say Y here if you are using the HP IPAQ H1940
|
||||
|
||||
config H1940BT
|
||||
tristate "Control the state of H1940 bluetooth chip"
|
||||
depends on ARCH_H1940
|
||||
select RFKILL
|
||||
help
|
||||
This is a simple driver that is able to control
|
||||
the state of built in bluetooth chip on h1940.
|
||||
|
||||
config PM_H1940
|
||||
bool
|
||||
help
|
||||
Internal node for H1940 and related PM
|
||||
|
||||
config MACH_N30
|
||||
bool "Acer N30 family"
|
||||
select CPU_S3C2410
|
||||
select MACH_N35
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you want suppt for the Acer N30, Acer N35,
|
||||
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
|
||||
|
||||
config MACH_N35
|
||||
bool
|
||||
help
|
||||
Internal node in order to enable support for Acer N35 if Acer N30 is
|
||||
selected.
|
||||
|
||||
config ARCH_BAST
|
||||
bool "Simtec Electronics BAST (EB2410ITX)"
|
||||
select CPU_S3C2410
|
||||
select S3C2410_IOTIMING if S3C2410_CPUFREQ
|
||||
select PM_SIMTEC if PM
|
||||
select SIMTEC_NOR
|
||||
select MACH_BAST_IDE
|
||||
select S3C24XX_DCLK
|
||||
select ISA
|
||||
select S3C_DEV_HWMON
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics EB2410ITX
|
||||
development board (also known as BAST)
|
||||
|
||||
config MACH_OTOM
|
||||
bool "NexVision OTOM Board"
|
||||
select CPU_S3C2410
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Nex Vision OTOM board
|
||||
|
||||
config MACH_AML_M5900
|
||||
bool "AML M5900 Series"
|
||||
select CPU_S3C2410
|
||||
select PM_SIMTEC if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the American Microsystems M5900 Series
|
||||
<http://www.amltd.com>
|
||||
|
||||
config BAST_PC104_IRQ
|
||||
bool "BAST PC104 IRQ support"
|
||||
depends on ARCH_BAST
|
||||
default y
|
||||
help
|
||||
Say Y here to enable the PC104 IRQ routing on the
|
||||
Simtec BAST (EB2410ITX)
|
||||
|
||||
config MACH_TCT_HAMMER
|
||||
bool "TCT Hammer Board"
|
||||
select CPU_S3C2410
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the TinCanTools Hammer Board
|
||||
<http://www.tincantools.com>
|
||||
|
||||
config MACH_VR1000
|
||||
bool "Thorcom VR1000"
|
||||
select PM_SIMTEC if PM
|
||||
select S3C24XX_DCLK
|
||||
select SIMTEC_NOR
|
||||
select MACH_BAST_IDE
|
||||
select CPU_S3C2410
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Thorcom VR1000 board.
|
||||
|
||||
config MACH_QT2410
|
||||
bool "QT2410"
|
||||
select CPU_S3C2410
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Armzone QT2410
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -9,32 +9,6 @@ obj-m :=
|
|||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
|
||||
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
|
||||
obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o
|
||||
obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o
|
||||
obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o
|
||||
obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o
|
||||
|
||||
# Machine support
|
||||
|
||||
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
|
||||
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
|
||||
obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
|
||||
obj-$(CONFIG_PM_H1940) += pm-h1940.o
|
||||
obj-$(CONFIG_MACH_N30) += mach-n30.o
|
||||
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
|
||||
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
|
||||
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
|
||||
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
|
||||
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
|
||||
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
|
||||
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
|
||||
|
||||
# Common bits of machine support
|
||||
|
||||
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
|
||||
|
||||
# machine additions
|
||||
|
||||
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
|
||||
|
|
|
|||
|
|
@ -2,41 +2,6 @@
|
|||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
config CPU_S3C2412
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM926T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select S3C2412_PM if PM
|
||||
select S3C2412_DMA if S3C2410_DMA
|
||||
help
|
||||
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
|
||||
|
||||
config CPU_S3C2412_ONLY
|
||||
bool
|
||||
depends on ARCH_S3C2410 && !CPU_S3C2410 && \
|
||||
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2443 && CPU_S3C2412
|
||||
default y if CPU_S3C2412
|
||||
|
||||
config S3C2412_DMA
|
||||
bool
|
||||
depends on CPU_S3C2412
|
||||
help
|
||||
Internal config node for S3C2412 DMA support
|
||||
|
||||
config S3C2412_PM
|
||||
bool
|
||||
select S3C2412_PM_SLEEP
|
||||
help
|
||||
Internal config node to apply S3C2412 power management
|
||||
|
||||
config S3C2412_PM_SLEEP
|
||||
bool
|
||||
help
|
||||
Internal config node to apply sleep for S3C2412 power management.
|
||||
Can be selected by another SoCs with similar sleep procedure.
|
||||
|
||||
# Note, the S3C2412 IOtiming support is in plat-s3c24xx
|
||||
|
||||
config S3C2412_CPUFREQ
|
||||
|
|
@ -46,53 +11,3 @@ config S3C2412_CPUFREQ
|
|||
default y
|
||||
help
|
||||
CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
|
||||
|
||||
menu "S3C2412 Machines"
|
||||
|
||||
config MACH_JIVE
|
||||
bool "Logitech Jive"
|
||||
select CPU_S3C2412
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Logitech Jive.
|
||||
|
||||
config MACH_JIVE_SHOW_BOOTLOADER
|
||||
bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
|
||||
depends on MACH_JIVE && EXPERIMENTAL
|
||||
|
||||
config MACH_SMDK2413
|
||||
bool "SMDK2413"
|
||||
select CPU_S3C2412
|
||||
select MACH_S3C2413
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using an SMDK2413
|
||||
|
||||
config MACH_S3C2413
|
||||
bool
|
||||
help
|
||||
Internal node for S3C2413 version of SMDK2413, so that
|
||||
machine_is_s3c2413() will work when MACH_SMDK2413 is
|
||||
selected
|
||||
|
||||
config MACH_SMDK2412
|
||||
bool "SMDK2412"
|
||||
select MACH_SMDK2413
|
||||
help
|
||||
Say Y here if you are using an SMDK2412
|
||||
|
||||
Note, this shares support with SMDK2413, so will automatically
|
||||
select MACH_SMDK2413.
|
||||
|
||||
config MACH_VSTMS
|
||||
bool "VMSTMS"
|
||||
select CPU_S3C2412
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using an VSTMS board
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -9,16 +9,4 @@ obj-m :=
|
|||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
|
||||
obj-$(CONFIG_CPU_S3C2412) += irq.o
|
||||
obj-$(CONFIG_CPU_S3C2412) += clock.o
|
||||
obj-$(CONFIG_S3C2412_DMA) += dma.o
|
||||
obj-$(CONFIG_S3C2412_PM) += pm.o
|
||||
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o
|
||||
obj-$(CONFIG_S3C2412_CPUFREQ) += cpu-freq.o
|
||||
|
||||
# Machine support
|
||||
|
||||
obj-$(CONFIG_MACH_JIVE) += mach-jive.o
|
||||
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
|
||||
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
|
||||
|
|
|
|||
|
|
@ -7,54 +7,8 @@
|
|||
# note, this also supports the S3C2450 which is so similar it has the same
|
||||
# ID code as the S3C2416.
|
||||
|
||||
config CPU_S3C2416
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM926T
|
||||
select S3C2416_DMA if S3C2410_DMA
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2443_CLOCK
|
||||
help
|
||||
Support for the S3C2416 SoC from the S3C24XX line
|
||||
|
||||
config S3C2416_DMA
|
||||
bool
|
||||
depends on CPU_S3C2416
|
||||
help
|
||||
Internal config node for S3C2416 DMA support
|
||||
|
||||
config S3C2416_PM
|
||||
bool
|
||||
select S3C2412_PM_SLEEP
|
||||
help
|
||||
Internal config node to apply S3C2416 power management
|
||||
|
||||
config S3C2416_SETUP_SDHCI
|
||||
bool
|
||||
select S3C2416_SETUP_SDHCI_GPIO
|
||||
help
|
||||
Internal helper functions for S3C2416 based SDHCI systems
|
||||
|
||||
config S3C2416_SETUP_SDHCI_GPIO
|
||||
bool
|
||||
help
|
||||
Common setup code for SDHCI gpio.
|
||||
|
||||
menu "S3C2416 Machines"
|
||||
|
||||
config MACH_SMDK2416
|
||||
bool "SMDK2416"
|
||||
select CPU_S3C2416
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2416_SETUP_SDHCI
|
||||
select S3C2416_PM if PM
|
||||
help
|
||||
Say Y here if you are using an SMDK2416
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -9,14 +9,4 @@ obj-m :=
|
|||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o clock.o
|
||||
obj-$(CONFIG_CPU_S3C2416) += irq.o
|
||||
obj-$(CONFIG_S3C2416_PM) += pm.o
|
||||
#obj-$(CONFIG_S3C2416_DMA) += dma.o
|
||||
|
||||
# Device setup
|
||||
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
|
||||
|
||||
# Machine support
|
||||
|
||||
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
|
||||
|
|
|
|||
|
|
@ -2,35 +2,6 @@
|
|||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
config CPU_S3C2440
|
||||
bool
|
||||
select CPU_ARM920T
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_PM if PM
|
||||
select S3C2440_DMA if S3C2410_DMA
|
||||
select CPU_S3C244X
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
help
|
||||
Support for S3C2440 Samsung Mobile CPU based systems.
|
||||
|
||||
config CPU_S3C2442
|
||||
bool
|
||||
select CPU_ARM920T
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_PM if PM
|
||||
select CPU_S3C244X
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
help
|
||||
Support for S3C2442 Samsung Mobile CPU based systems.
|
||||
|
||||
config CPU_S3C244X
|
||||
bool
|
||||
depends on CPU_S3C2440 || CPU_S3C2442
|
||||
help
|
||||
Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
|
||||
|
||||
|
||||
|
||||
config S3C2440_CPUFREQ
|
||||
bool "S3C2440/S3C2442 CPU Frequency scaling support"
|
||||
depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
|
||||
|
|
@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
|
|||
default y if CPU_FREQ_S3C24XX_PLL
|
||||
help
|
||||
PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
|
||||
|
||||
config S3C2440_DMA
|
||||
bool
|
||||
depends on CPU_S3C2440
|
||||
help
|
||||
Support for S3C2440 specific DMA code5A
|
||||
|
||||
menu "S3C2440 and S3C2442 Machines"
|
||||
|
||||
config MACH_ANUBIS
|
||||
bool "Simtec Electronics ANUBIS"
|
||||
select CPU_S3C2440
|
||||
select S3C24XX_DCLK
|
||||
select PM_SIMTEC if PM
|
||||
select HAVE_PATA_PLATFORM
|
||||
select S3C24XX_GPIO_EXTRA64
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics ANUBIS
|
||||
development system
|
||||
|
||||
config MACH_NEO1973_GTA02
|
||||
bool "Openmoko GTA02 / Freerunner phone"
|
||||
select CPU_S3C2442
|
||||
select MFD_PCF50633
|
||||
select PCF50633_GPIO
|
||||
select I2C
|
||||
select POWER_SUPPLY
|
||||
select MACH_NEO1973
|
||||
select S3C2410_PWM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
|
||||
|
||||
config MACH_OSIRIS
|
||||
bool "Simtec IM2440D20 (OSIRIS) module"
|
||||
select CPU_S3C2440
|
||||
select S3C24XX_DCLK
|
||||
select PM_SIMTEC if PM
|
||||
select S3C24XX_GPIO_EXTRA128
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Simtec IM2440D20 module, also
|
||||
known as the Osiris.
|
||||
|
||||
config MACH_OSIRIS_DVS
|
||||
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
|
||||
depends on MACH_OSIRIS
|
||||
select TPS65010
|
||||
help
|
||||
Say Y/M here if you want to have dynamic voltage scaling support
|
||||
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
|
||||
|
||||
The DVS driver alters the voltage supplied to the ARM core
|
||||
depending on the frequency it is running at. The driver itself
|
||||
does not do any of the frequency alteration, which is left up
|
||||
to the cpufreq driver.
|
||||
|
||||
config MACH_RX3715
|
||||
bool "HP iPAQ rx3715"
|
||||
select CPU_S3C2440
|
||||
select S3C2440_XTAL_16934400
|
||||
select PM_H1940 if PM
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the HP iPAQ rx3715.
|
||||
|
||||
config ARCH_S3C2440
|
||||
bool "SMDK2440"
|
||||
select CPU_S3C2440
|
||||
select S3C2440_XTAL_16934400
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the SMDK2440.
|
||||
|
||||
config MACH_NEXCODER_2440
|
||||
bool "NexVision NEXCODER 2440 Light Board"
|
||||
select CPU_S3C2440
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
|
||||
|
||||
config SMDK2440_CPU2440
|
||||
bool "SMDK2440 with S3C2440 CPU module"
|
||||
default y if ARCH_S3C2440
|
||||
select S3C2440_XTAL_16934400
|
||||
select CPU_S3C2440
|
||||
|
||||
config SMDK2440_CPU2442
|
||||
bool "SMDM2440 with S3C2442 CPU module"
|
||||
select CPU_S3C2442
|
||||
|
||||
config MACH_AT2440EVB
|
||||
bool "Avantech AT2440EVB development board"
|
||||
select CPU_S3C2440
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the AT2440EVB development board
|
||||
|
||||
config MACH_MINI2440
|
||||
bool "MINI2440 development board"
|
||||
select CPU_S3C2440
|
||||
select EEPROM_AT24
|
||||
select NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
select LEDS_TRIGGER
|
||||
select LEDS_TRIGGER_BACKLIGHT
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
|
||||
available via various sources. It can come with a 3.5" or 7" touch LCD.
|
||||
|
||||
config MACH_RX1950
|
||||
bool "HP iPAQ rx1950"
|
||||
select CPU_S3C2442
|
||||
select S3C24XX_DCLK
|
||||
select PM_H1940 if PM
|
||||
select I2C
|
||||
select S3C2410_PWM
|
||||
select S3C_DEV_NAND
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C2440_XTAL_16934400
|
||||
help
|
||||
Say Y here if you're using HP iPAQ rx1950
|
||||
|
||||
endmenu
|
||||
|
|
|
|||
|
|
@ -9,33 +9,9 @@ obj-m :=
|
|||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o dsc.o
|
||||
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
|
||||
obj-$(CONFIG_CPU_S3C2440) += dsc.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2440) += irq.o
|
||||
obj-$(CONFIG_CPU_S3C2440) += clock.o
|
||||
obj-$(CONFIG_S3C2440_DMA) += dma.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o
|
||||
obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o
|
||||
obj-$(CONFIG_CPU_S3C244X) += s3c244x-clock.o
|
||||
obj-$(CONFIG_S3C2440_CPUFREQ) += s3c2440-cpufreq.o
|
||||
|
||||
obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
|
||||
obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
|
||||
|
||||
# Machine support
|
||||
|
||||
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
|
||||
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
|
||||
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
|
||||
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
|
||||
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
|
||||
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
|
||||
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
|
||||
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
|
||||
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
|
||||
|
||||
# extra machine support
|
||||
|
||||
obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
|
||||
|
|
|
|||
|
|
@ -1,17 +0,0 @@
|
|||
/*
|
||||
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Common Header for S3C2440 machines
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#ifndef __ARCH_ARM_MACH_S3C2440_COMMON_H
|
||||
#define __ARCH_ARM_MACH_S3C2440_COMMON_H
|
||||
|
||||
void s3c2440_restart(char mode, const char *cmd);
|
||||
|
||||
#endif /* __ARCH_ARM_MACH_S3C2440_COMMON_H */
|
||||
|
|
@ -1,32 +0,0 @@
|
|||
# Copyright 2007 Simtec Electronics
|
||||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
config CPU_S3C2443
|
||||
bool
|
||||
depends on ARCH_S3C2410
|
||||
select CPU_ARM920T
|
||||
select S3C2443_DMA if S3C2410_DMA
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2443_CLOCK
|
||||
help
|
||||
Support for the S3C2443 SoC from the S3C24XX line
|
||||
|
||||
config S3C2443_DMA
|
||||
bool
|
||||
depends on CPU_S3C2443
|
||||
help
|
||||
Internal config node for S3C2443 DMA support
|
||||
|
||||
menu "S3C2443 Machines"
|
||||
|
||||
config MACH_SMDK2443
|
||||
bool "SMDK2443"
|
||||
select CPU_S3C2443
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_HSMMC1
|
||||
help
|
||||
Say Y here if you are using an SMDK2443
|
||||
|
||||
endmenu
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
# arch/arm/mach-s3c2443/Makefile
|
||||
#
|
||||
# Copyright 2007 Simtec Electronics
|
||||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
obj-y :=
|
||||
obj-m :=
|
||||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o
|
||||
obj-$(CONFIG_CPU_S3C2443) += irq.o
|
||||
obj-$(CONFIG_CPU_S3C2443) += clock.o
|
||||
|
||||
obj-$(CONFIG_S3C2443_DMA) += dma.o
|
||||
|
||||
# Machine support
|
||||
|
||||
obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
|
||||
|
|
@ -0,0 +1,504 @@
|
|||
# arch/arm/mach-s3c24xx/Kconfig
|
||||
#
|
||||
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
||||
# http://www.samsung.com/
|
||||
#
|
||||
# Copyright 2007 Simtec Electronics
|
||||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
if ARCH_S3C24XX
|
||||
|
||||
menu "SAMSUNG S3C24XX SoCs Support"
|
||||
|
||||
comment "S3C24XX SoCs"
|
||||
|
||||
config CPU_S3C2410
|
||||
bool "SAMSUNG S3C2410"
|
||||
default y
|
||||
select CPU_ARM920T
|
||||
select S3C2410_CLOCK
|
||||
select CPU_LLSERIAL_S3C2410
|
||||
select S3C2410_PM if PM
|
||||
select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX
|
||||
help
|
||||
Support for S3C2410 and S3C2410A family from the S3C24XX line
|
||||
of Samsung Mobile CPUs.
|
||||
|
||||
config CPU_S3C2412
|
||||
bool "SAMSUNG S3C2412"
|
||||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM926T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select S3C2412_PM if PM
|
||||
select S3C2412_DMA if S3C24XX_DMA
|
||||
help
|
||||
Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
|
||||
|
||||
config CPU_S3C2416
|
||||
bool "SAMSUNG S3C2416/S3C2450"
|
||||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM926T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2443_COMMON
|
||||
select S3C2416_DMA if S3C24XX_DMA
|
||||
select S3C2416_PM if PM
|
||||
help
|
||||
Support for the S3C2416 SoC from the S3C24XX line
|
||||
|
||||
config CPU_S3C2440
|
||||
bool "SAMSUNG S3C2440"
|
||||
select CPU_ARM920T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_PM if PM
|
||||
select S3C2440_DMA if S3C24XX_DMA
|
||||
help
|
||||
Support for S3C2440 Samsung Mobile CPU based systems.
|
||||
|
||||
config CPU_S3C2442
|
||||
bool "SAMSUNG S3C2442"
|
||||
select CPU_ARM920T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select S3C2410_CLOCK
|
||||
select S3C2410_PM if PM
|
||||
help
|
||||
Support for S3C2442 Samsung Mobile CPU based systems.
|
||||
|
||||
config CPU_S3C244X
|
||||
def_bool y
|
||||
depends on CPU_S3C2440 || CPU_S3C2442
|
||||
|
||||
config CPU_S3C2443
|
||||
bool "SAMSUNG S3C2443"
|
||||
depends on ARCH_S3C24XX
|
||||
select CPU_ARM920T
|
||||
select CPU_LLSERIAL_S3C2440
|
||||
select SAMSUNG_CLKSRC
|
||||
select S3C2443_COMMON
|
||||
select S3C2443_DMA if S3C24XX_DMA
|
||||
help
|
||||
Support for the S3C2443 SoC from the S3C24XX line
|
||||
|
||||
if CPU_S3C2410
|
||||
|
||||
config S3C2410_DMA
|
||||
bool
|
||||
depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
|
||||
default y if CPU_S3C2410 || CPU_S3C2442
|
||||
help
|
||||
DMA device selection for S3C2410 and compatible CPUs
|
||||
|
||||
config S3C2410_PM
|
||||
bool
|
||||
help
|
||||
Power Management code common to S3C2410 and better
|
||||
|
||||
config SIMTEC_NOR
|
||||
bool
|
||||
help
|
||||
Internal node to specify machine has simtec NOR mapping
|
||||
|
||||
config MACH_BAST_IDE
|
||||
bool
|
||||
select HAVE_PATA_PLATFORM
|
||||
help
|
||||
Internal node for machines with an BAST style IDE
|
||||
interface
|
||||
|
||||
comment "S3C2410 Boards"
|
||||
|
||||
#
|
||||
# The "S3C2410 Boards" list is ordered alphabetically by option text.
|
||||
# (without ARCH_ or MACH_)
|
||||
#
|
||||
|
||||
config MACH_AML_M5900
|
||||
bool "AML M5900 Series"
|
||||
select PM_SIMTEC if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the American Microsystems M5900 Series
|
||||
<http://www.amltd.com>
|
||||
|
||||
config ARCH_BAST
|
||||
bool "Simtec Electronics BAST (EB2410ITX)"
|
||||
select S3C2410_IOTIMING if S3C2410_CPUFREQ
|
||||
select PM_SIMTEC if PM
|
||||
select SIMTEC_NOR
|
||||
select MACH_BAST_IDE
|
||||
select S3C24XX_DCLK
|
||||
select ISA
|
||||
select S3C_DEV_HWMON
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics EB2410ITX
|
||||
development board (also known as BAST)
|
||||
|
||||
config BAST_PC104_IRQ
|
||||
bool "BAST PC104 IRQ support"
|
||||
depends on ARCH_BAST
|
||||
default y
|
||||
help
|
||||
Say Y here to enable the PC104 IRQ routing on the
|
||||
Simtec BAST (EB2410ITX)
|
||||
|
||||
config ARCH_H1940
|
||||
bool "IPAQ H1940"
|
||||
select PM_H1940 if PM
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
select S3C2410_SETUP_TS
|
||||
help
|
||||
Say Y here if you are using the HP IPAQ H1940
|
||||
|
||||
config H1940BT
|
||||
tristate "Control the state of H1940 bluetooth chip"
|
||||
depends on ARCH_H1940
|
||||
select RFKILL
|
||||
help
|
||||
This is a simple driver that is able to control
|
||||
the state of built in bluetooth chip on h1940.
|
||||
|
||||
config PM_H1940
|
||||
bool
|
||||
help
|
||||
Internal node for H1940 and related PM
|
||||
|
||||
config MACH_N30
|
||||
bool "Acer N30 family"
|
||||
select MACH_N35
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you want suppt for the Acer N30, Acer N35,
|
||||
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
|
||||
|
||||
config MACH_OTOM
|
||||
bool "NexVision OTOM Board"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Nex Vision OTOM board
|
||||
|
||||
config MACH_QT2410
|
||||
bool "QT2410"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Armzone QT2410
|
||||
|
||||
config ARCH_SMDK2410
|
||||
bool "SMDK2410/A9M2410"
|
||||
select MACH_SMDK
|
||||
help
|
||||
Say Y here if you are using the SMDK2410 or the derived module A9M2410
|
||||
<http://www.fsforth.de>
|
||||
|
||||
config MACH_TCT_HAMMER
|
||||
bool "TCT Hammer Board"
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the TinCanTools Hammer Board
|
||||
<http://www.tincantools.com>
|
||||
|
||||
config MACH_VR1000
|
||||
bool "Thorcom VR1000"
|
||||
select PM_SIMTEC if PM
|
||||
select S3C24XX_DCLK
|
||||
select SIMTEC_NOR
|
||||
select MACH_BAST_IDE
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Thorcom VR1000 board.
|
||||
|
||||
endif # CPU_S3C2410
|
||||
|
||||
config S3C2412_PM_SLEEP
|
||||
bool
|
||||
help
|
||||
Internal config node to apply sleep for S3C2412 power management.
|
||||
Can be selected by another SoCs such as S3C2416 with similar
|
||||
sleep procedure.
|
||||
|
||||
if CPU_S3C2412
|
||||
|
||||
config CPU_S3C2412_ONLY
|
||||
bool
|
||||
depends on ARCH_S3C24XX && !CPU_S3C2410 && \
|
||||
!CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
|
||||
!CPU_S3C2443 && CPU_S3C2412
|
||||
default y
|
||||
|
||||
config S3C2412_DMA
|
||||
bool
|
||||
help
|
||||
Internal config node for S3C2412 DMA support
|
||||
|
||||
config S3C2412_PM
|
||||
bool
|
||||
help
|
||||
Internal config node to apply S3C2412 power management
|
||||
|
||||
comment "S3C2412 Boards"
|
||||
|
||||
#
|
||||
# The "S3C2412 Boards" list is ordered alphabetically by option text.
|
||||
# (without ARCH_ or MACH_)
|
||||
#
|
||||
|
||||
config MACH_JIVE
|
||||
bool "Logitech Jive"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Logitech Jive.
|
||||
|
||||
config MACH_JIVE_SHOW_BOOTLOADER
|
||||
bool "Allow access to bootloader partitions in MTD (EXPERIMENTAL)"
|
||||
depends on MACH_JIVE && EXPERIMENTAL
|
||||
|
||||
config MACH_S3C2413
|
||||
bool
|
||||
help
|
||||
Internal node for S3C2413 version of SMDK2413, so that
|
||||
machine_is_s3c2413() will work when MACH_SMDK2413 is
|
||||
selected
|
||||
|
||||
config MACH_SMDK2412
|
||||
bool "SMDK2412"
|
||||
select MACH_SMDK2413
|
||||
help
|
||||
Say Y here if you are using an SMDK2412
|
||||
|
||||
Note, this shares support with SMDK2413, so will automatically
|
||||
select MACH_SMDK2413.
|
||||
|
||||
config MACH_SMDK2413
|
||||
bool "SMDK2413"
|
||||
select MACH_S3C2413
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using an SMDK2413
|
||||
|
||||
config MACH_VSTMS
|
||||
bool "VMSTMS"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using an VSTMS board
|
||||
|
||||
endif # CPU_S3C2412
|
||||
|
||||
if CPU_S3C2416
|
||||
|
||||
config S3C2416_PM
|
||||
bool
|
||||
select S3C2412_PM_SLEEP
|
||||
help
|
||||
Internal config node to apply S3C2416 power management
|
||||
|
||||
config S3C2416_SETUP_SDHCI
|
||||
bool
|
||||
select S3C2416_SETUP_SDHCI_GPIO
|
||||
help
|
||||
Internal helper functions for S3C2416 based SDHCI systems
|
||||
|
||||
config S3C2416_SETUP_SDHCI_GPIO
|
||||
bool
|
||||
help
|
||||
Common setup code for SDHCI gpio.
|
||||
|
||||
comment "S3C2416 Boards"
|
||||
|
||||
config MACH_SMDK2416
|
||||
bool "SMDK2416"
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_FB
|
||||
select S3C_DEV_HSMMC
|
||||
select S3C_DEV_HSMMC1
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C2416_SETUP_SDHCI
|
||||
help
|
||||
Say Y here if you are using an SMDK2416
|
||||
|
||||
endif # CPU_S3C2416
|
||||
|
||||
if CPU_S3C2440
|
||||
|
||||
config S3C2440_DMA
|
||||
bool
|
||||
help
|
||||
Support for S3C2440 specific DMA code5A
|
||||
|
||||
comment "S3C2440 Boards"
|
||||
|
||||
#
|
||||
# The "S3C2440 Boards" list is ordered alphabetically by option text.
|
||||
# (without ARCH_ or MACH_)
|
||||
#
|
||||
|
||||
config MACH_ANUBIS
|
||||
bool "Simtec Electronics ANUBIS"
|
||||
select S3C24XX_DCLK
|
||||
select PM_SIMTEC if PM
|
||||
select HAVE_PATA_PLATFORM
|
||||
select S3C24XX_GPIO_EXTRA64
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Simtec Electronics ANUBIS
|
||||
development system
|
||||
|
||||
config MACH_AT2440EVB
|
||||
bool "Avantech AT2440EVB development board"
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the AT2440EVB development board
|
||||
|
||||
config MACH_MINI2440
|
||||
bool "MINI2440 development board"
|
||||
select EEPROM_AT24
|
||||
select NEW_LEDS
|
||||
select LEDS_CLASS
|
||||
select LEDS_TRIGGER
|
||||
select LEDS_TRIGGER_BACKLIGHT
|
||||
select S3C_DEV_NAND
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
|
||||
available via various sources. It can come with a 3.5" or 7" touch LCD.
|
||||
|
||||
config MACH_NEXCODER_2440
|
||||
bool "NexVision NEXCODER 2440 Light Board"
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
|
||||
|
||||
config MACH_OSIRIS
|
||||
bool "Simtec IM2440D20 (OSIRIS) module"
|
||||
select S3C24XX_DCLK
|
||||
select PM_SIMTEC if PM
|
||||
select S3C24XX_GPIO_EXTRA128
|
||||
select S3C2440_XTAL_12000000
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the Simtec IM2440D20 module, also
|
||||
known as the Osiris.
|
||||
|
||||
config MACH_OSIRIS_DVS
|
||||
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
|
||||
depends on MACH_OSIRIS
|
||||
select TPS65010
|
||||
help
|
||||
Say Y/M here if you want to have dynamic voltage scaling support
|
||||
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
|
||||
|
||||
The DVS driver alters the voltage supplied to the ARM core
|
||||
depending on the frequency it is running at. The driver itself
|
||||
does not do any of the frequency alteration, which is left up
|
||||
to the cpufreq driver.
|
||||
|
||||
config MACH_RX3715
|
||||
bool "HP iPAQ rx3715"
|
||||
select S3C2440_XTAL_16934400
|
||||
select PM_H1940 if PM
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the HP iPAQ rx3715.
|
||||
|
||||
config ARCH_S3C2440
|
||||
bool "SMDK2440"
|
||||
select S3C2440_XTAL_16934400
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_USB_HOST
|
||||
select S3C_DEV_NAND
|
||||
help
|
||||
Say Y here if you are using the SMDK2440.
|
||||
|
||||
config SMDK2440_CPU2440
|
||||
bool "SMDK2440 with S3C2440 CPU module"
|
||||
default y if ARCH_S3C2440
|
||||
select S3C2440_XTAL_16934400
|
||||
|
||||
endif # CPU_S3C2440
|
||||
|
||||
if CPU_S3C2442
|
||||
|
||||
comment "S3C2442 Boards"
|
||||
|
||||
#
|
||||
# The "S3C2442 Boards" list is ordered alphabetically by option text.
|
||||
# (without ARCH_ or MACH_)
|
||||
#
|
||||
|
||||
config MACH_NEO1973_GTA02
|
||||
bool "Openmoko GTA02 / Freerunner phone"
|
||||
select MFD_PCF50633
|
||||
select PCF50633_GPIO
|
||||
select I2C
|
||||
select POWER_SUPPLY
|
||||
select MACH_NEO1973
|
||||
select S3C2410_PWM
|
||||
select S3C_DEV_USB_HOST
|
||||
help
|
||||
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
|
||||
|
||||
config MACH_RX1950
|
||||
bool "HP iPAQ rx1950"
|
||||
select S3C24XX_DCLK
|
||||
select PM_H1940 if PM
|
||||
select I2C
|
||||
select S3C2410_PWM
|
||||
select S3C_DEV_NAND
|
||||
select S3C2410_IOTIMING if S3C2440_CPUFREQ
|
||||
select S3C2440_XTAL_16934400
|
||||
help
|
||||
Say Y here if you're using HP iPAQ rx1950
|
||||
|
||||
config SMDK2440_CPU2442
|
||||
bool "SMDM2440 with S3C2442 CPU module"
|
||||
|
||||
endif # CPU_S3C2440
|
||||
|
||||
if CPU_S3C2443 || CPU_S3C2416
|
||||
|
||||
config S3C2443_COMMON
|
||||
bool
|
||||
help
|
||||
Common code for the S3C2443 and similar processors, which includes
|
||||
the S3C2416 and S3C2450.
|
||||
|
||||
endif # CPU_S3C2443 || CPU_S3C2416
|
||||
|
||||
if CPU_S3C2443
|
||||
|
||||
config S3C2443_DMA
|
||||
bool
|
||||
help
|
||||
Internal config node for S3C2443 DMA support
|
||||
|
||||
comment "S3C2443 Boards"
|
||||
|
||||
config MACH_SMDK2443
|
||||
bool "SMDK2443"
|
||||
select MACH_SMDK
|
||||
select S3C_DEV_HSMMC1
|
||||
help
|
||||
Say Y here if you are using an SMDK2443
|
||||
|
||||
endif # CPU_S3C2443
|
||||
|
||||
endmenu # SAMSUNG S3C24XX SoCs Support
|
||||
|
||||
endif # ARCH_S3C24XX
|
||||
|
|
@ -0,0 +1,89 @@
|
|||
# arch/arm/mach-s3c24xx/Makefile
|
||||
#
|
||||
# Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
||||
# http://www.samsung.com/
|
||||
#
|
||||
# Copyright 2007 Simtec Electronics
|
||||
#
|
||||
# Licensed under GPLv2
|
||||
|
||||
obj-y :=
|
||||
obj-m :=
|
||||
obj-n :=
|
||||
obj- :=
|
||||
|
||||
# core
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2410) += s3c2410.o
|
||||
obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
|
||||
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2412) += s3c2412.o irq-s3c2412.o clock-s3c2412.o
|
||||
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
|
||||
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
|
||||
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2416) += s3c2416.o irq-s3c2416.o clock-s3c2416.o
|
||||
obj-$(CONFIG_S3C2416_PM) += pm-s3c2416.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2440) += s3c2440.o irq-s3c2440.o clock-s3c2440.o
|
||||
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
|
||||
obj-$(CONFIG_CPU_S3C244X) += s3c244x.o irq-s3c244x.o clock-s3c244x.o
|
||||
obj-$(CONFIG_S3C2440_DMA) += dma-s3c2440.o
|
||||
|
||||
obj-$(CONFIG_CPU_S3C2443) += s3c2443.o irq-s3c2443.o clock-s3c2443.o
|
||||
obj-$(CONFIG_S3C2443_DMA) += dma-s3c2443.o
|
||||
|
||||
# common code
|
||||
|
||||
obj-$(CONFIG_S3C2443_COMMON) += common-s3c2443.o
|
||||
|
||||
#
|
||||
# machine support
|
||||
# following is ordered alphabetically by option text.
|
||||
#
|
||||
|
||||
obj-$(CONFIG_MACH_AML_M5900) += mach-amlm5900.o
|
||||
obj-$(CONFIG_ARCH_BAST) += mach-bast.o usb-simtec.o
|
||||
obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
|
||||
obj-$(CONFIG_ARCH_H1940) += mach-h1940.o
|
||||
obj-$(CONFIG_H1940BT) += h1940-bluetooth.o
|
||||
obj-$(CONFIG_PM_H1940) += pm-h1940.o
|
||||
obj-$(CONFIG_MACH_N30) += mach-n30.o
|
||||
obj-$(CONFIG_MACH_OTOM) += mach-otom.o
|
||||
obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
|
||||
obj-$(CONFIG_ARCH_SMDK2410) += mach-smdk2410.o
|
||||
obj-$(CONFIG_MACH_TCT_HAMMER) += mach-tct_hammer.o
|
||||
obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
|
||||
|
||||
obj-$(CONFIG_MACH_JIVE) += mach-jive.o
|
||||
obj-$(CONFIG_MACH_SMDK2413) += mach-smdk2413.o
|
||||
obj-$(CONFIG_MACH_VSTMS) += mach-vstms.o
|
||||
|
||||
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
|
||||
|
||||
obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o
|
||||
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
|
||||
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
|
||||
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
|
||||
obj-$(CONFIG_MACH_OSIRIS) += mach-osiris.o
|
||||
obj-$(CONFIG_MACH_RX3715) += mach-rx3715.o
|
||||
obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
|
||||
|
||||
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
|
||||
obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
|
||||
|
||||
obj-$(CONFIG_MACH_SMDK2443) += mach-smdk2443.o
|
||||
|
||||
# common bits of machine support
|
||||
|
||||
obj-$(CONFIG_SIMTEC_NOR) += nor-simtec.o
|
||||
|
||||
# machine additions
|
||||
|
||||
obj-$(CONFIG_MACH_BAST_IDE) += bast-ide.o
|
||||
obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
|
||||
|
||||
# device setup
|
||||
|
||||
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
|
||||
|
|
@ -15,7 +15,6 @@
|
|||
#include <linux/clk.h>
|
||||
|
||||
#include <plat/s3c2416.h>
|
||||
#include <plat/s3c2443.h>
|
||||
#include <plat/clock.h>
|
||||
#include <plat/clock-clksrc.h>
|
||||
#include <plat/cpu.h>
|
||||
|
|
@ -1,9 +1,18 @@
|
|||
/* linux/arch/arm/plat-s3c24xx/s3c2443-clock.c
|
||||
/*
|
||||
* Common code for SoCs starting with the S3C2443
|
||||
*
|
||||
* Copyright (c) 2007, 2010 Simtec Electronics
|
||||
* Ben Dooks <ben@simtec.co.uk>
|
||||
*
|
||||
* S3C2443 Clock control suport - common code
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/init.h>
|
||||
|
|
@ -12,7 +21,6 @@
|
|||
|
||||
#include <mach/regs-s3c2443-clock.h>
|
||||
|
||||
#include <plat/s3c2443.h>
|
||||
#include <plat/clock.h>
|
||||
#include <plat/clock-clksrc.h>
|
||||
#include <plat/cpu.h>
|
||||
|
|
@ -553,7 +561,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
|
|||
s3c24xx_setup_clocks(fclk, hclk, pclk);
|
||||
|
||||
printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
|
||||
(mpllcon & S3C2443_PLLCON_OFF) ? "off":"on",
|
||||
(mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
|
||||
print_mhz(pll), print_mhz(fclk),
|
||||
print_mhz(hclk), print_mhz(pclk));
|
||||
|
||||
|
|
@ -568,7 +576,7 @@ void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
|
|||
}
|
||||
|
||||
printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
|
||||
(epllcon & S3C2443_PLLCON_OFF) ? "off":"on",
|
||||
(epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
|
||||
print_mhz(clk_get_rate(&clk_epll)),
|
||||
print_mhz(clk_get_rate(&clk_usb_bus)));
|
||||
}
|
||||
|
|
@ -12,6 +12,12 @@
|
|||
#ifndef __ARCH_ARM_MACH_S3C2410_COMMON_H
|
||||
#define __ARCH_ARM_MACH_S3C2410_COMMON_H
|
||||
|
||||
#ifdef CONFIG_CPU_S3C2410
|
||||
void s3c2410_restart(char mode, const char *cmd);
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CPU_S3C2440
|
||||
void s3c2440_restart(char mode, const char *cmd);
|
||||
#endif
|
||||
|
||||
#endif /* __ARCH_ARM_MACH_S3C2410_COMMON_H */
|
||||
|
|
@ -38,6 +38,7 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/serial_core.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/s3c24xx.h>
|
||||
|
||||
#include <linux/mmc/host.h>
|
||||
|
||||
|
|
@ -73,7 +74,6 @@
|
|||
#include <mach/regs-gpioj.h>
|
||||
#include <mach/fb.h>
|
||||
|
||||
#include <mach/spi.h>
|
||||
#include <plat/usb-control.h>
|
||||
#include <mach/regs-mem.h>
|
||||
#include <mach/hardware.h>
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue