dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung 

SPI platform device definitions consolidated from respective machine
folder to plat-samsung

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
Padmavathi Venna 2011-12-23 10:14:31 +09:00 committed by Kukjin Kim
parent a153e31abb
commit 875a59374c
12 changed files with 141 additions and 800 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/mach-s3c64xx/Makefile
View File

@ -59,4 +59,3 @@ obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
obj-y += dev-uart.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o

173
arch/arm/mach-s3c64xx/dev-spi.c
View File

@ -1,173 +0,0 @@
/* linux/arch/arm/plat-s3c64xx/dev-spi.c
*
* Copyright (C) 2009 Samsung Electronics Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/export.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/devs.h>
/* SPI Controller platform_devices */
/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
* The emulated CS is toggled by board specific mechanism, as it can
* be either some immediate GPIO or some signal out of some other
* chip in between ... or some yet another way.
* We simply do not assume anything about CS.
*/
static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
switch (pdev->id) {
case 0:
base = S3C64XX_GPC(0);
break;
case 1:
base = S3C64XX_GPC(4);
break;
default:
dev_err(&pdev->dev, "Invalid SPI Controller number!");
return -EINVAL;
}
s3c_gpio_cfgall_range(base, 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
static struct resource s3c64xx_spi0_resource[] = {
[0] = {
.start = S3C64XX_PA_SPI0,
.end = S3C64XX_PA_SPI0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI0_TX,
.end = DMACH_SPI0_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI0_RX,
.end = DMACH_SPI0_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI0,
.end = IRQ_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
.cfg_gpio = s3c64xx_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
struct platform_device s3c64xx_device_spi0 = {
.name = "s3c64xx-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
.resource = s3c64xx_spi0_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c64xx_spi0_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_spi0);
static struct resource s3c64xx_spi1_resource[] = {
[0] = {
.start = S3C64XX_PA_SPI1,
.end = S3C64XX_PA_SPI1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI1_TX,
.end = DMACH_SPI1_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI1_RX,
.end = DMACH_SPI1_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI1,
.end = IRQ_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
.cfg_gpio = s3c64xx_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.tx_st_done = 21,
};
struct platform_device s3c64xx_device_spi1 = {
.name = "s3c64xx-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
.resource = s3c64xx_spi1_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s3c64xx_spi1_pdata,
},
};
EXPORT_SYMBOL(s3c64xx_device_spi1);
void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
struct s3c64xx_spi_info *pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
return;
}
switch (cntrlr) {
case 0:
pd = &s3c64xx_spi0_pdata;
break;
case 1:
pd = &s3c64xx_spi1_pdata;
break;
default:
printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
__func__, cntrlr);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
}

1
arch/arm/mach-s5p64x0/Makefile
View File

@ -26,7 +26,6 @@ obj-$(CONFIG_MACH_SMDK6450) += mach-smdk6450.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o

218
arch/arm/mach-s5p64x0/dev-spi.c
View File

@ -1,218 +0,0 @@
/* linux/arch/arm/mach-s5p64x0/dev-spi.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/regs-clock.h>
#include <mach/spi-clocks.h>
#include <plat/cpu.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
/* SPI Controller platform_devices */
/* Since we emulate multi-cs capability, we do not touch the CS.
* The emulated CS is toggled by board specific mechanism, as it can
* be either some immediate GPIO or some signal out of some other
* chip in between ... or some yet another way.
* We simply do not assume anything about CS.
*/
static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
switch (pdev->id) {
case 0:
base = S5P6440_GPC(0);
break;
case 1:
base = S5P6440_GPC(4);
break;
default:
dev_err(&pdev->dev, "Invalid SPI Controller number!");
return -EINVAL;
}
s3c_gpio_cfgall_range(base, 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
switch (pdev->id) {
case 0:
base = S5P6450_GPC(0);
break;
case 1:
base = S5P6450_GPC(4);
break;
default:
dev_err(&pdev->dev, "Invalid SPI Controller number!");
return -EINVAL;
}
s3c_gpio_cfgall_range(base, 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
static struct resource s5p64x0_spi0_resource[] = {
[0] = {
.start = S5P64X0_PA_SPI0,
.end = S5P64X0_PA_SPI0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI0_TX,
.end = DMACH_SPI0_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI0_RX,
.end = DMACH_SPI0_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI0,
.end = IRQ_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
.cfg_gpio = s5p6440_spi_cfg_gpio,
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
.cfg_gpio = s5p6450_spi_cfg_gpio,
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
struct platform_device s5p64x0_device_spi0 = {
.name = "s3c64xx-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s5p64x0_spi0_resource),
.resource = s5p64x0_spi0_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource s5p64x0_spi1_resource[] = {
[0] = {
.start = S5P64X0_PA_SPI1,
.end = S5P64X0_PA_SPI1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI1_TX,
.end = DMACH_SPI1_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI1_RX,
.end = DMACH_SPI1_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI1,
.end = IRQ_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
.cfg_gpio = s5p6440_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
.cfg_gpio = s5p6450_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.tx_st_done = 25,
};
struct platform_device s5p64x0_device_spi1 = {
.name = "s3c64xx-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s5p64x0_spi1_resource),
.resource = s5p64x0_spi1_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
struct s3c64xx_spi_info *pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
return;
}
switch (cntrlr) {
case 0:
if (soc_is_s5p6450())
pd = &s5p6450_spi0_pdata;
else
pd = &s5p6440_spi0_pdata;
s5p64x0_device_spi0.dev.platform_data = pd;
break;
case 1:
if (soc_is_s5p6450())
pd = &s5p6450_spi1_pdata;
else
pd = &s5p6440_spi1_pdata;
s5p64x0_device_spi1.dev.platform_data = pd;
break;
default:
printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
__func__, cntrlr);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
}

1
arch/arm/mach-s5pc100/Makefile
View File

@ -25,7 +25,6 @@ obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
# machine support

220
arch/arm/mach-s5pc100/dev-spi.c
View File

@ -1,220 +0,0 @@
/* linux/arch/arm/mach-s5pc100/dev-spi.c
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
#include <plat/irqs.h>
/* SPI Controller platform_devices */
/* Since we emulate multi-cs capability, we do not touch the CS.
* The emulated CS is toggled by board specific mechanism, as it can
* be either some immediate GPIO or some signal out of some other
* chip in between ... or some yet another way.
* We simply do not assume anything about CS.
*/
static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 1:
s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
break;
case 2:
s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
break;
default:
dev_err(&pdev->dev, "Invalid SPI Controller number!");
return -EINVAL;
}
return 0;
}
static struct resource s5pc100_spi0_resource[] = {
[0] = {
.start = S5PC100_PA_SPI0,
.end = S5PC100_PA_SPI0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI0_TX,
.end = DMACH_SPI0_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI0_RX,
.end = DMACH_SPI0_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI0,
.end = IRQ_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
.cfg_gpio = s5pc100_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
struct platform_device s5pc100_device_spi0 = {
.name = "s3c64xx-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s5pc100_spi0_resource),
.resource = s5pc100_spi0_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_spi0_pdata,
},
};
static struct resource s5pc100_spi1_resource[] = {
[0] = {
.start = S5PC100_PA_SPI1,
.end = S5PC100_PA_SPI1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI1_TX,
.end = DMACH_SPI1_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI1_RX,
.end = DMACH_SPI1_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI1,
.end = IRQ_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
.cfg_gpio = s5pc100_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
struct platform_device s5pc100_device_spi1 = {
.name = "s3c64xx-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s5pc100_spi1_resource),
.resource = s5pc100_spi1_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_spi1_pdata,
},
};
static struct resource s5pc100_spi2_resource[] = {
[0] = {
.start = S5PC100_PA_SPI2,
.end = S5PC100_PA_SPI2 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI2_TX,
.end = DMACH_SPI2_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI2_RX,
.end = DMACH_SPI2_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI2,
.end = IRQ_SPI2,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
.cfg_gpio = s5pc100_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 13,
.high_speed = 1,
.tx_st_done = 21,
};
struct platform_device s5pc100_device_spi2 = {
.name = "s3c64xx-spi",
.id = 2,
.num_resources = ARRAY_SIZE(s5pc100_spi2_resource),
.resource = s5pc100_spi2_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pc100_spi2_pdata,
},
};
void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
struct s3c64xx_spi_info *pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
return;
}
switch (cntrlr) {
case 0:
pd = &s5pc100_spi0_pdata;
break;
case 1:
pd = &s5pc100_spi1_pdata;
break;
case 2:
pd = &s5pc100_spi2_pdata;
break;
default:
printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
__func__, cntrlr);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
}

1
arch/arm/mach-s5pv210/Makefile
View File

@ -27,7 +27,6 @@ obj-$(CONFIG_MACH_TORBRECK) += mach-torbreck.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o

169
arch/arm/mach-s5pv210/dev-spi.c
View File

@ -1,169 +0,0 @@
/* linux/arch/arm/mach-s5pv210/dev-spi.c
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/spi-clocks.h>
#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>
/* SPI Controller platform_devices */
/* Since we emulate multi-cs capability, we do not touch the CS.
* The emulated CS is toggled by board specific mechanism, as it can
* be either some immediate GPIO or some signal out of some other
* chip in between ... or some yet another way.
* We simply do not assume anything about CS.
*/
static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
{
unsigned int base;
switch (pdev->id) {
case 0:
base = S5PV210_GPB(0);
break;
case 1:
base = S5PV210_GPB(4);
break;
default:
dev_err(&pdev->dev, "Invalid SPI Controller number!");
return -EINVAL;
}
s3c_gpio_cfgall_range(base, 3,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
return 0;
}
static struct resource s5pv210_spi0_resource[] = {
[0] = {
.start = S5PV210_PA_SPI0,
.end = S5PV210_PA_SPI0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI0_TX,
.end = DMACH_SPI0_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI0_RX,
.end = DMACH_SPI0_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI0,
.end = IRQ_SPI0,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
.cfg_gpio = s5pv210_spi_cfg_gpio,
.fifo_lvl_mask = 0x1ff,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
static u64 spi_dmamask = DMA_BIT_MASK(32);
struct platform_device s5pv210_device_spi0 = {
.name = "s3c64xx-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s5pv210_spi0_resource),
.resource = s5pv210_spi0_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_spi0_pdata,
},
};
static struct resource s5pv210_spi1_resource[] = {
[0] = {
.start = S5PV210_PA_SPI1,
.end = S5PV210_PA_SPI1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = DMACH_SPI1_TX,
.end = DMACH_SPI1_TX,
.flags = IORESOURCE_DMA,
},
[2] = {
.start = DMACH_SPI1_RX,
.end = DMACH_SPI1_RX,
.flags = IORESOURCE_DMA,
},
[3] = {
.start = IRQ_SPI1,
.end = IRQ_SPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
.cfg_gpio = s5pv210_spi_cfg_gpio,
.fifo_lvl_mask = 0x7f,
.rx_lvl_offset = 15,
.high_speed = 1,
.tx_st_done = 25,
};
struct platform_device s5pv210_device_spi1 = {
.name = "s3c64xx-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv210_spi1_resource),
.resource = s5pv210_spi1_resource,
.dev = {
.dma_mask = &spi_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv210_spi1_pdata,
},
};
void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
struct s3c64xx_spi_info *pd;
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0
|| src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
return;
}
switch (cntrlr) {
case 0:
pd = &s5pv210_spi0_pdata;
break;
case 1:
pd = &s5pv210_spi1_pdata;
break;
default:
printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
__func__, cntrlr);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
}

16
arch/arm/plat-samsung/Kconfig
View File

@ -226,11 +226,23 @@ config SAMSUNG_DEV_IDE
help
Compile in platform device definitions for IDE
config S3C64XX_DEV_SPI
config S3C64XX_DEV_SPI0
bool
help
Compile in platform device definitions for S3C64XX's type
SPI controllers.
SPI controller 0
config S3C64XX_DEV_SPI1
bool
help
Compile in platform device definitions for S3C64XX's type
SPI controller 1
config S3C64XX_DEV_SPI2
bool
help
Compile in platform device definitions for S3C64XX's type
SPI controller 2
config SAMSUNG_DEV_TS
bool

118
arch/arm/plat-samsung/devs.c
View File

@ -61,6 +61,7 @@
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
#include <plat/s3c64xx-spi.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
@ -1461,3 +1462,120 @@ struct platform_device s3c_device_wdt = {
.resource = s3c_wdt_resource,
};
#endif /* CONFIG_S3C_DEV_WDT */
#ifdef CONFIG_S3C64XX_DEV_SPI0
static struct resource s3c64xx_spi0_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
[1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
[2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
[3] = DEFINE_RES_IRQ(IRQ_SPI0),
};
struct platform_device s3c64xx_device_spi0 = {
.name = "s3c64xx-spi",
.id = 0,
.num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
.resource = s3c64xx_spi0_resource,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
pr_err("%s: Invalid SPI configuration\n", __func__);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
}
#endif /* CONFIG_S3C64XX_DEV_SPI0 */
#ifdef CONFIG_S3C64XX_DEV_SPI1
static struct resource s3c64xx_spi1_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
[1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
[2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
[3] = DEFINE_RES_IRQ(IRQ_SPI1),
};
struct platform_device s3c64xx_device_spi1 = {
.name = "s3c64xx-spi",
.id = 1,
.num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
.resource = s3c64xx_spi1_resource,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
pr_err("%s: Invalid SPI configuration\n", __func__);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
}
#endif /* CONFIG_S3C64XX_DEV_SPI1 */
#ifdef CONFIG_S3C64XX_DEV_SPI2
static struct resource s3c64xx_spi2_resource[] = {
[0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
[1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
[2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
[3] = DEFINE_RES_IRQ(IRQ_SPI2),
};
struct platform_device s3c64xx_device_spi2 = {
.name = "s3c64xx-spi",
.id = 2,
.num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
.resource = s3c64xx_spi2_resource,
.dev = {
.dma_mask = &samsung_device_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs)
{
if (!pd) {
pr_err("%s:Need to pass platform data\n", __func__);
return;
}
/* Reject invalid configuration */
if (!num_cs || src_clk_nr < 0) {
pr_err("%s: Invalid SPI configuration\n", __func__);
return;
}
pd->num_cs = num_cs;
pd->src_clk_nr = src_clk_nr;
s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
}
#endif /* CONFIG_S3C64XX_DEV_SPI2 */

8
arch/arm/plat-samsung/include/plat/devs.h
View File

@ -39,6 +39,7 @@ extern struct platform_device s3c64xx_device_pcm0;
extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c64xx_device_spi0;
extern struct platform_device s3c64xx_device_spi1;
extern struct platform_device s3c64xx_device_spi2;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_cfcon;
@ -98,8 +99,6 @@ extern struct platform_device s5p6450_device_iis1;
extern struct platform_device s5p6450_device_iis2;
extern struct platform_device s5p6450_device_pcm0;
extern struct platform_device s5p64x0_device_spi0;
extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s5pc100_device_ac97;
extern struct platform_device s5pc100_device_iis0;
@ -108,9 +107,6 @@ extern struct platform_device s5pc100_device_iis2;
extern struct platform_device s5pc100_device_pcm0;
extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_spdif;
extern struct platform_device s5pc100_device_spi0;
extern struct platform_device s5pc100_device_spi1;
extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_ac97;
extern struct platform_device s5pv210_device_iis0;
@ -120,8 +116,6 @@ extern struct platform_device s5pv210_device_pcm0;
extern struct platform_device s5pv210_device_pcm1;
extern struct platform_device s5pv210_device_pcm2;
extern struct platform_device s5pv210_device_spdif;
extern struct platform_device s5pv210_device_spi0;
extern struct platform_device s5pv210_device_spi1;
extern struct platform_device exynos4_device_ac97;
extern struct platform_device exynos4_device_ahci;

15
arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
View File

@ -56,18 +56,19 @@ struct s3c64xx_spi_info {
};
/**
* s3c64xx_spi_set_info - SPI Controller configure callback by the board
* s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
* @cntrlr: SPI controller number the configuration is for.
* @pd: SPI platform data to set.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
int src_clk_nr, int num_cs);
#endif /* __S3C64XX_PLAT_SPI_H */