[SCSI] Merge branch 'linus'
Conflicts: drivers/message/fusion/mptsas.c fixed up conflict between req->data_len accessors and mptsas driver updates. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
This commit is contained in:
James Bottomley
commit
82681a318f
|
|
@ -60,3 +60,62 @@ Description:
|
|||
Indicates whether the block layer should automatically
|
||||
generate checksums for write requests bound for
|
||||
devices that support receiving integrity metadata.
|
||||
|
||||
What: /sys/block/<disk>/alignment_offset
|
||||
Date: April 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
Storage devices may report a physical block size that is
|
||||
bigger than the logical block size (for instance a drive
|
||||
with 4KB physical sectors exposing 512-byte logical
|
||||
blocks to the operating system). This parameter
|
||||
indicates how many bytes the beginning of the device is
|
||||
offset from the disk's natural alignment.
|
||||
|
||||
What: /sys/block/<disk>/<partition>/alignment_offset
|
||||
Date: April 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
Storage devices may report a physical block size that is
|
||||
bigger than the logical block size (for instance a drive
|
||||
with 4KB physical sectors exposing 512-byte logical
|
||||
blocks to the operating system). This parameter
|
||||
indicates how many bytes the beginning of the partition
|
||||
is offset from the disk's natural alignment.
|
||||
|
||||
What: /sys/block/<disk>/queue/logical_block_size
|
||||
Date: May 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
This is the smallest unit the storage device can
|
||||
address. It is typically 512 bytes.
|
||||
|
||||
What: /sys/block/<disk>/queue/physical_block_size
|
||||
Date: May 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
This is the smallest unit the storage device can write
|
||||
without resorting to read-modify-write operation. It is
|
||||
usually the same as the logical block size but may be
|
||||
bigger. One example is SATA drives with 4KB sectors
|
||||
that expose a 512-byte logical block size to the
|
||||
operating system.
|
||||
|
||||
What: /sys/block/<disk>/queue/minimum_io_size
|
||||
Date: April 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
Storage devices may report a preferred minimum I/O size,
|
||||
which is the smallest request the device can perform
|
||||
without incurring a read-modify-write penalty. For disk
|
||||
drives this is often the physical block size. For RAID
|
||||
arrays it is often the stripe chunk size.
|
||||
|
||||
What: /sys/block/<disk>/queue/optimal_io_size
|
||||
Date: April 2009
|
||||
Contact: Martin K. Petersen <martin.petersen@oracle.com>
|
||||
Description:
|
||||
Storage devices may report an optimal I/O size, which is
|
||||
the device's preferred unit of receiving I/O. This is
|
||||
rarely reported for disk drives. For RAID devices it is
|
||||
usually the stripe width or the internal block size.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,33 @@
|
|||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/model
|
||||
Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the SCSI INQUIRY page 0 model for logical drive
|
||||
Y of controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/rev
|
||||
Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the SCSI INQUIRY page 0 revision for logical
|
||||
drive Y of controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/unique_id
|
||||
Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the SCSI INQUIRY page 83 serial number for logical
|
||||
drive Y of controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/vendor
|
||||
Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: Displays the SCSI INQUIRY page 0 vendor for logical drive
|
||||
Y of controller X.
|
||||
|
||||
Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/block:cciss!cXdY
|
||||
Date: March 2009
|
||||
Kernel Version: 2.6.30
|
||||
Contact: iss_storagedev@hp.com
|
||||
Description: A symbolic link to /sys/block/cciss!cXdY
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
|
||||
Date: August 2008
|
||||
KernelVersion: 2.6.27
|
||||
Contact: mark.langsdorf@amd.com
|
||||
Description: These files exist in every cpu's cache index directories.
|
||||
There are currently 2 cache_disable_# files in each
|
||||
directory. Reading from these files on a supported
|
||||
processor will return that cache disable index value
|
||||
for that processor and node. Writing to one of these
|
||||
files will cause the specificed cache index to be disabled.
|
||||
|
||||
Currently, only AMD Family 10h Processors support cache index
|
||||
disable, and only for their L3 caches. See the BIOS and
|
||||
Kernel Developer's Guide at
|
||||
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
|
||||
for formatting information and other details on the
|
||||
cache index disable.
|
||||
Users: joachim.deguara@amd.com
|
||||
|
|
@ -704,12 +704,24 @@ this directory the following files can currently be found:
|
|||
The current number of free dma_debug_entries
|
||||
in the allocator.
|
||||
|
||||
dma-api/driver-filter
|
||||
You can write a name of a driver into this file
|
||||
to limit the debug output to requests from that
|
||||
particular driver. Write an empty string to
|
||||
that file to disable the filter and see
|
||||
all errors again.
|
||||
|
||||
If you have this code compiled into your kernel it will be enabled by default.
|
||||
If you want to boot without the bookkeeping anyway you can provide
|
||||
'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
|
||||
Notice that you can not enable it again at runtime. You have to reboot to do
|
||||
so.
|
||||
|
||||
If you want to see debug messages only for a special device driver you can
|
||||
specify the dma_debug_driver=<drivername> parameter. This will enable the
|
||||
driver filter at boot time. The debug code will only print errors for that
|
||||
driver afterwards. This filter can be disabled or changed later using debugfs.
|
||||
|
||||
When the code disables itself at runtime this is most likely because it ran
|
||||
out of dma_debug_entries. These entries are preallocated at boot. The number
|
||||
of preallocated entries is defined per architecture. If it is too low for you
|
||||
|
|
|
|||
|
|
@ -13,7 +13,8 @@ DOCBOOKS := z8530book.xml mcabook.xml device-drivers.xml \
|
|||
gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
|
||||
genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \
|
||||
mac80211.xml debugobjects.xml sh.xml regulator.xml \
|
||||
alsa-driver-api.xml writing-an-alsa-driver.xml
|
||||
alsa-driver-api.xml writing-an-alsa-driver.xml \
|
||||
tracepoint.xml
|
||||
|
||||
###
|
||||
# The build process is as follows (targets):
|
||||
|
|
|
|||
|
|
@ -0,0 +1,89 @@
|
|||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
|
||||
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
|
||||
|
||||
<book id="Tracepoints">
|
||||
<bookinfo>
|
||||
<title>The Linux Kernel Tracepoint API</title>
|
||||
|
||||
<authorgroup>
|
||||
<author>
|
||||
<firstname>Jason</firstname>
|
||||
<surname>Baron</surname>
|
||||
<affiliation>
|
||||
<address>
|
||||
<email>jbaron@redhat.com</email>
|
||||
</address>
|
||||
</affiliation>
|
||||
</author>
|
||||
</authorgroup>
|
||||
|
||||
<legalnotice>
|
||||
<para>
|
||||
This documentation is free software; you can redistribute
|
||||
it and/or modify it under the terms of the GNU General Public
|
||||
License as published by the Free Software Foundation; either
|
||||
version 2 of the License, or (at your option) any later
|
||||
version.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
This program is distributed in the hope that it will be
|
||||
useful, but WITHOUT ANY WARRANTY; without even the implied
|
||||
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
See the GNU General Public License for more details.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
You should have received a copy of the GNU General Public
|
||||
License along with this program; if not, write to the Free
|
||||
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||
MA 02111-1307 USA
|
||||
</para>
|
||||
|
||||
<para>
|
||||
For more details see the file COPYING in the source
|
||||
distribution of Linux.
|
||||
</para>
|
||||
</legalnotice>
|
||||
</bookinfo>
|
||||
|
||||
<toc></toc>
|
||||
<chapter id="intro">
|
||||
<title>Introduction</title>
|
||||
<para>
|
||||
Tracepoints are static probe points that are located in strategic points
|
||||
throughout the kernel. 'Probes' register/unregister with tracepoints
|
||||
via a callback mechanism. The 'probes' are strictly typed functions that
|
||||
are passed a unique set of parameters defined by each tracepoint.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
From this simple callback mechanism, 'probes' can be used to profile, debug,
|
||||
and understand kernel behavior. There are a number of tools that provide a
|
||||
framework for using 'probes'. These tools include Systemtap, ftrace, and
|
||||
LTTng.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
Tracepoints are defined in a number of header files via various macros. Thus,
|
||||
the purpose of this document is to provide a clear accounting of the available
|
||||
tracepoints. The intention is to understand not only what tracepoints are
|
||||
available but also to understand where future tracepoints might be added.
|
||||
</para>
|
||||
|
||||
<para>
|
||||
The API presented has functions of the form:
|
||||
<function>trace_tracepointname(function parameters)</function>. These are the
|
||||
tracepoints callbacks that are found throughout the code. Registering and
|
||||
unregistering probes with these callback sites is covered in the
|
||||
<filename>Documentation/trace/*</filename> directory.
|
||||
</para>
|
||||
</chapter>
|
||||
|
||||
<chapter id="irq">
|
||||
<title>IRQ</title>
|
||||
!Iinclude/trace/events/irq.h
|
||||
</chapter>
|
||||
|
||||
</book>
|
||||
|
|
@ -192,23 +192,24 @@ rcu/rcuhier (which displays the struct rcu_node hierarchy).
|
|||
The output of "cat rcu/rcudata" looks as follows:
|
||||
|
||||
rcu:
|
||||
0 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=1 rp=3c2a dt=23301/73 dn=2 df=1882 of=0 ri=2126 ql=2 b=10
|
||||
1 c=4011 g=4012 pq=1 pqc=4011 qp=0 rpfq=3 rp=39a6 dt=78073/1 dn=2 df=1402 of=0 ri=1875 ql=46 b=10
|
||||
2 c=4010 g=4010 pq=1 pqc=4010 qp=0 rpfq=-5 rp=1d12 dt=16646/0 dn=2 df=3140 of=0 ri=2080 ql=0 b=10
|
||||
3 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=2b50 dt=21159/1 dn=2 df=2230 of=0 ri=1923 ql=72 b=10
|
||||
4 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1644 dt=5783/1 dn=2 df=3348 of=0 ri=2805 ql=7 b=10
|
||||
5 c=4012 g=4013 pq=0 pqc=4011 qp=1 rpfq=3 rp=1aac dt=5879/1 dn=2 df=3140 of=0 ri=2066 ql=10 b=10
|
||||
6 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=ed8 dt=5847/1 dn=2 df=3797 of=0 ri=1266 ql=10 b=10
|
||||
7 c=4012 g=4013 pq=1 pqc=4012 qp=1 rpfq=3 rp=1fa2 dt=6199/1 dn=2 df=2795 of=0 ri=2162 ql=28 b=10
|
||||
rcu:
|
||||
0 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=10951/1 dn=0 df=1101 of=0 ri=36 ql=0 b=10
|
||||
1 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=16117/1 dn=0 df=1015 of=0 ri=0 ql=0 b=10
|
||||
2 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1445/1 dn=0 df=1839 of=0 ri=0 ql=0 b=10
|
||||
3 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=6681/1 dn=0 df=1545 of=0 ri=0 ql=0 b=10
|
||||
4 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=1003/1 dn=0 df=1992 of=0 ri=0 ql=0 b=10
|
||||
5 c=17829 g=17830 pq=1 pqc=17829 qp=1 dt=3887/1 dn=0 df=3331 of=0 ri=4 ql=2 b=10
|
||||
6 c=17829 g=17829 pq=1 pqc=17829 qp=0 dt=859/1 dn=0 df=3224 of=0 ri=0 ql=0 b=10
|
||||
7 c=17829 g=17830 pq=0 pqc=17829 qp=1 dt=3761/1 dn=0 df=1818 of=0 ri=0 ql=2 b=10
|
||||
rcu_bh:
|
||||
0 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-145 rp=21d6 dt=23301/73 dn=2 df=0 of=0 ri=0 ql=0 b=10
|
||||
1 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-170 rp=20ce dt=78073/1 dn=2 df=26 of=0 ri=5 ql=0 b=10
|
||||
2 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-83 rp=fbd dt=16646/0 dn=2 df=28 of=0 ri=4 ql=0 b=10
|
||||
3 c=-268 g=-268 pq=1 pqc=-268 qp=0 rpfq=-105 rp=178c dt=21159/1 dn=2 df=28 of=0 ri=2 ql=0 b=10
|
||||
4 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-30 rp=b54 dt=5783/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
|
||||
5 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-29 rp=df5 dt=5879/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
|
||||
6 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-28 rp=788 dt=5847/1 dn=2 df=32 of=0 ri=0 ql=0 b=10
|
||||
7 c=-268 g=-268 pq=1 pqc=-268 qp=1 rpfq=-53 rp=1098 dt=6199/1 dn=2 df=30 of=0 ri=3 ql=0 b=10
|
||||
0 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=10951/1 dn=0 df=0 of=0 ri=0 ql=0 b=10
|
||||
1 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=16117/1 dn=0 df=13 of=0 ri=0 ql=0 b=10
|
||||
2 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1445/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
3 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=6681/1 dn=0 df=9 of=0 ri=0 ql=0 b=10
|
||||
4 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=1003/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
5 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3887/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
|
||||
|
||||
The first section lists the rcu_data structures for rcu, the second for
|
||||
rcu_bh. Each section has one line per CPU, or eight for this 8-CPU system.
|
||||
|
|
@ -253,12 +254,6 @@ o "pqc" indicates which grace period the last-observed quiescent
|
|||
o "qp" indicates that RCU still expects a quiescent state from
|
||||
this CPU.
|
||||
|
||||
o "rpfq" is the number of rcu_pending() calls on this CPU required
|
||||
to induce this CPU to invoke force_quiescent_state().
|
||||
|
||||
o "rp" is low-order four hex digits of the count of how many times
|
||||
rcu_pending() has been invoked on this CPU.
|
||||
|
||||
o "dt" is the current value of the dyntick counter that is incremented
|
||||
when entering or leaving dynticks idle state, either by the
|
||||
scheduler or by irq. The number after the "/" is the interrupt
|
||||
|
|
@ -305,6 +300,9 @@ o "b" is the batch limit for this CPU. If more than this number
|
|||
of RCU callbacks is ready to invoke, then the remainder will
|
||||
be deferred.
|
||||
|
||||
There is also an rcu/rcudata.csv file with the same information in
|
||||
comma-separated-variable spreadsheet format.
|
||||
|
||||
|
||||
The output of "cat rcu/rcugp" looks as follows:
|
||||
|
||||
|
|
@ -411,3 +409,63 @@ o Each element of the form "1/1 0:127 ^0" represents one struct
|
|||
For example, the first entry at the lowest level shows
|
||||
"^0", indicating that it corresponds to bit zero in
|
||||
the first entry at the middle level.
|
||||
|
||||
|
||||
The output of "cat rcu/rcu_pending" looks as follows:
|
||||
|
||||
rcu:
|
||||
0 np=255892 qsp=53936 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
|
||||
1 np=261224 qsp=54638 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
|
||||
2 np=237496 qsp=49664 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
|
||||
3 np=236249 qsp=48766 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
|
||||
4 np=221310 qsp=46850 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
|
||||
5 np=237332 qsp=48449 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
|
||||
6 np=219995 qsp=46718 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
|
||||
7 np=249893 qsp=49390 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
|
||||
rcu_bh:
|
||||
0 np=146741 qsp=1419 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
|
||||
1 np=155792 qsp=12597 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
|
||||
2 np=136629 qsp=18680 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
|
||||
3 np=137723 qsp=2843 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
|
||||
4 np=123110 qsp=12433 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
|
||||
5 np=137456 qsp=4210 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
|
||||
6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
|
||||
7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
|
||||
|
||||
As always, this is once again split into "rcu" and "rcu_bh" portions.
|
||||
The fields are as follows:
|
||||
|
||||
o "np" is the number of times that __rcu_pending() has been invoked
|
||||
for the corresponding flavor of RCU.
|
||||
|
||||
o "qsp" is the number of times that the RCU was waiting for a
|
||||
quiescent state from this CPU.
|
||||
|
||||
o "cbr" is the number of times that this CPU had RCU callbacks
|
||||
that had passed through a grace period, and were thus ready
|
||||
to be invoked.
|
||||
|
||||
o "cng" is the number of times that this CPU needed another
|
||||
grace period while RCU was idle.
|
||||
|
||||
o "gpc" is the number of times that an old grace period had
|
||||
completed, but this CPU was not yet aware of it.
|
||||
|
||||
o "gps" is the number of times that a new grace period had started,
|
||||
but this CPU was not yet aware of it.
|
||||
|
||||
o "nf" is the number of times that this CPU suspected that the
|
||||
current grace period had run for too long, and thus needed to
|
||||
be forced.
|
||||
|
||||
Please note that "forcing" consists of sending resched IPIs
|
||||
to holdout CPUs. If that CPU really still is in an old RCU
|
||||
read-side critical section, then we really do have to wait for it.
|
||||
The assumption behing "forcing" is that the CPU is not still in
|
||||
an old RCU read-side critical section, but has not yet responded
|
||||
for some other reason.
|
||||
|
||||
o "nn" is the number of times that this CPU needed nothing. Alert
|
||||
readers will note that the rcu "nn" number for a given CPU very
|
||||
closely matches the rcu_bh "np" number for that same CPU. This
|
||||
is due to short-circuit evaluation in rcu_pending().
|
||||
|
|
|
|||
|
|
@ -184,8 +184,9 @@ length. Single character labels using special characters, that being anything
|
|||
other than a letter or digit, are reserved for use by the Smack development
|
||||
team. Smack labels are unstructured, case sensitive, and the only operation
|
||||
ever performed on them is comparison for equality. Smack labels cannot
|
||||
contain unprintable characters or the "/" (slash) character. Smack labels
|
||||
cannot begin with a '-', which is reserved for special options.
|
||||
contain unprintable characters, the "/" (slash), the "\" (backslash), the "'"
|
||||
(quote) and '"' (double-quote) characters.
|
||||
Smack labels cannot begin with a '-', which is reserved for special options.
|
||||
|
||||
There are some predefined labels:
|
||||
|
||||
|
|
@ -523,3 +524,18 @@ Smack supports some mount options:
|
|||
|
||||
These mount options apply to all file system types.
|
||||
|
||||
Smack auditing
|
||||
|
||||
If you want Smack auditing of security events, you need to set CONFIG_AUDIT
|
||||
in your kernel configuration.
|
||||
By default, all denied events will be audited. You can change this behavior by
|
||||
writing a single character to the /smack/logging file :
|
||||
0 : no logging
|
||||
1 : log denied (default)
|
||||
2 : log accepted
|
||||
3 : log denied & accepted
|
||||
|
||||
Events are logged as 'key=value' pairs, for each event you at least will get
|
||||
the subjet, the object, the rights requested, the action, the kernel function
|
||||
that triggered the event, plus other pairs depending on the type of event
|
||||
audited.
|
||||
|
|
|
|||
|
|
@ -186,7 +186,7 @@ a virtual address mapping (unlike the earlier scheme of virtual address
|
|||
do not have a corresponding kernel virtual address space mapping) and
|
||||
low-memory pages.
|
||||
|
||||
Note: Please refer to Documentation/PCI/PCI-DMA-mapping.txt for a discussion
|
||||
Note: Please refer to Documentation/DMA-mapping.txt for a discussion
|
||||
on PCI high mem DMA aspects and mapping of scatter gather lists, and support
|
||||
for 64 bit PCI.
|
||||
|
||||
|
|
|
|||
|
|
@ -60,7 +60,7 @@ go_lock | Called for the first local holder of a lock
|
|||
go_unlock | Called on the final local unlock of a lock
|
||||
go_dump | Called to print content of object for debugfs file, or on
|
||||
| error to dump glock to the log.
|
||||
go_type; | The type of the glock, LM_TYPE_.....
|
||||
go_type | The type of the glock, LM_TYPE_.....
|
||||
go_min_hold_time | The minimum hold time
|
||||
|
||||
The minimum hold time for each lock is the time after a remote lock
|
||||
|
|
|
|||
|
|
@ -11,18 +11,15 @@ their I/O so file system consistency is maintained. One of the nifty
|
|||
features of GFS is perfect consistency -- changes made to the file system
|
||||
on one machine show up immediately on all other machines in the cluster.
|
||||
|
||||
GFS uses interchangable inter-node locking mechanisms. Different lock
|
||||
modules can plug into GFS and each file system selects the appropriate
|
||||
lock module at mount time. Lock modules include:
|
||||
GFS uses interchangable inter-node locking mechanisms, the currently
|
||||
supported mechanisms are:
|
||||
|
||||
lock_nolock -- allows gfs to be used as a local file system
|
||||
|
||||
lock_dlm -- uses a distributed lock manager (dlm) for inter-node locking
|
||||
The dlm is found at linux/fs/dlm/
|
||||
|
||||
In addition to interfacing with an external locking manager, a gfs lock
|
||||
module is responsible for interacting with external cluster management
|
||||
systems. Lock_dlm depends on user space cluster management systems found
|
||||
Lock_dlm depends on user space cluster management systems found
|
||||
at the URL above.
|
||||
|
||||
To use gfs as a local file system, no external clustering systems are
|
||||
|
|
@ -31,13 +28,19 @@ needed, simply:
|
|||
$ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device
|
||||
$ mount -t gfs2 /dev/block_device /dir
|
||||
|
||||
GFS2 is not on-disk compatible with previous versions of GFS.
|
||||
If you are using Fedora, you need to install the gfs2-utils package
|
||||
and, for lock_dlm, you will also need to install the cman package
|
||||
and write a cluster.conf as per the documentation.
|
||||
|
||||
GFS2 is not on-disk compatible with previous versions of GFS, but it
|
||||
is pretty close.
|
||||
|
||||
The following man pages can be found at the URL above:
|
||||
gfs2_fsck to repair a filesystem
|
||||
fsck.gfs2 to repair a filesystem
|
||||
gfs2_grow to expand a filesystem online
|
||||
gfs2_jadd to add journals to a filesystem online
|
||||
gfs2_tool to manipulate, examine and tune a filesystem
|
||||
gfs2_quota to examine and change quota values in a filesystem
|
||||
gfs2_convert to convert a gfs filesystem to gfs2 in-place
|
||||
mount.gfs2 to help mount(8) mount a filesystem
|
||||
mkfs.gfs2 to make a filesystem
|
||||
|
|
|
|||
|
|
@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
|
|||
Author:
|
||||
Christoph Rohland <cr@sap.com>, 1.12.01
|
||||
Updated:
|
||||
Hugh Dickins <hugh@veritas.com>, 4 June 2007
|
||||
Hugh Dickins, 4 June 2007
|
||||
|
|
|
|||
|
|
@ -0,0 +1,131 @@
|
|||
Futex Requeue PI
|
||||
----------------
|
||||
|
||||
Requeueing of tasks from a non-PI futex to a PI futex requires
|
||||
special handling in order to ensure the underlying rt_mutex is never
|
||||
left without an owner if it has waiters; doing so would break the PI
|
||||
boosting logic [see rt-mutex-desgin.txt] For the purposes of
|
||||
brevity, this action will be referred to as "requeue_pi" throughout
|
||||
this document. Priority inheritance is abbreviated throughout as
|
||||
"PI".
|
||||
|
||||
Motivation
|
||||
----------
|
||||
|
||||
Without requeue_pi, the glibc implementation of
|
||||
pthread_cond_broadcast() must resort to waking all the tasks waiting
|
||||
on a pthread_condvar and letting them try to sort out which task
|
||||
gets to run first in classic thundering-herd formation. An ideal
|
||||
implementation would wake the highest-priority waiter, and leave the
|
||||
rest to the natural wakeup inherent in unlocking the mutex
|
||||
associated with the condvar.
|
||||
|
||||
Consider the simplified glibc calls:
|
||||
|
||||
/* caller must lock mutex */
|
||||
pthread_cond_wait(cond, mutex)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(mutex);
|
||||
do {
|
||||
unlock(cond->__data.__lock);
|
||||
futex_wait(cond->__data.__futex);
|
||||
lock(cond->__data.__lock);
|
||||
} while(...)
|
||||
unlock(cond->__data.__lock);
|
||||
lock(mutex);
|
||||
}
|
||||
|
||||
pthread_cond_broadcast(cond)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(cond->__data.__lock);
|
||||
futex_requeue(cond->data.__futex, cond->mutex);
|
||||
}
|
||||
|
||||
Once pthread_cond_broadcast() requeues the tasks, the cond->mutex
|
||||
has waiters. Note that pthread_cond_wait() attempts to lock the
|
||||
mutex only after it has returned to user space. This will leave the
|
||||
underlying rt_mutex with waiters, and no owner, breaking the
|
||||
previously mentioned PI-boosting algorithms.
|
||||
|
||||
In order to support PI-aware pthread_condvar's, the kernel needs to
|
||||
be able to requeue tasks to PI futexes. This support implies that
|
||||
upon a successful futex_wait system call, the caller would return to
|
||||
user space already holding the PI futex. The glibc implementation
|
||||
would be modified as follows:
|
||||
|
||||
|
||||
/* caller must lock mutex */
|
||||
pthread_cond_wait_pi(cond, mutex)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(mutex);
|
||||
do {
|
||||
unlock(cond->__data.__lock);
|
||||
futex_wait_requeue_pi(cond->__data.__futex);
|
||||
lock(cond->__data.__lock);
|
||||
} while(...)
|
||||
unlock(cond->__data.__lock);
|
||||
/* the kernel acquired the the mutex for us */
|
||||
}
|
||||
|
||||
pthread_cond_broadcast_pi(cond)
|
||||
{
|
||||
lock(cond->__data.__lock);
|
||||
unlock(cond->__data.__lock);
|
||||
futex_requeue_pi(cond->data.__futex, cond->mutex);
|
||||
}
|
||||
|
||||
The actual glibc implementation will likely test for PI and make the
|
||||
necessary changes inside the existing calls rather than creating new
|
||||
calls for the PI cases. Similar changes are needed for
|
||||
pthread_cond_timedwait() and pthread_cond_signal().
|
||||
|
||||
Implementation
|
||||
--------------
|
||||
|
||||
In order to ensure the rt_mutex has an owner if it has waiters, it
|
||||
is necessary for both the requeue code, as well as the waiting code,
|
||||
to be able to acquire the rt_mutex before returning to user space.
|
||||
The requeue code cannot simply wake the waiter and leave it to
|
||||
acquire the rt_mutex as it would open a race window between the
|
||||
requeue call returning to user space and the waiter waking and
|
||||
starting to run. This is especially true in the uncontended case.
|
||||
|
||||
The solution involves two new rt_mutex helper routines,
|
||||
rt_mutex_start_proxy_lock() and rt_mutex_finish_proxy_lock(), which
|
||||
allow the requeue code to acquire an uncontended rt_mutex on behalf
|
||||
of the waiter and to enqueue the waiter on a contended rt_mutex.
|
||||
Two new system calls provide the kernel<->user interface to
|
||||
requeue_pi: FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE_CMP_PI.
|
||||
|
||||
FUTEX_WAIT_REQUEUE_PI is called by the waiter (pthread_cond_wait()
|
||||
and pthread_cond_timedwait()) to block on the initial futex and wait
|
||||
to be requeued to a PI-aware futex. The implementation is the
|
||||
result of a high-speed collision between futex_wait() and
|
||||
futex_lock_pi(), with some extra logic to check for the additional
|
||||
wake-up scenarios.
|
||||
|
||||
FUTEX_REQUEUE_CMP_PI is called by the waker
|
||||
(pthread_cond_broadcast() and pthread_cond_signal()) to requeue and
|
||||
possibly wake the waiting tasks. Internally, this system call is
|
||||
still handled by futex_requeue (by passing requeue_pi=1). Before
|
||||
requeueing, futex_requeue() attempts to acquire the requeue target
|
||||
PI futex on behalf of the top waiter. If it can, this waiter is
|
||||
woken. futex_requeue() then proceeds to requeue the remaining
|
||||
nr_wake+nr_requeue tasks to the PI futex, calling
|
||||
rt_mutex_start_proxy_lock() prior to each requeue to prepare the
|
||||
task as a waiter on the underlying rt_mutex. It is possible that
|
||||
the lock can be acquired at this stage as well, if so, the next
|
||||
waiter is woken to finish the acquisition of the lock.
|
||||
|
||||
FUTEX_REQUEUE_PI accepts nr_wake and nr_requeue as arguments, but
|
||||
their sum is all that really matters. futex_requeue() will wake or
|
||||
requeue up to nr_wake + nr_requeue tasks. It will wake only as many
|
||||
tasks as it can acquire the lock for, which in the majority of cases
|
||||
should be 0 as good programming practice dictates that the caller of
|
||||
either pthread_cond_broadcast() or pthread_cond_signal() acquire the
|
||||
mutex prior to making the call. FUTEX_REQUEUE_PI requires that
|
||||
nr_wake=1. nr_requeue should be INT_MAX for broadcast and 0 for
|
||||
signal.
|
||||
|
|
@ -150,6 +150,11 @@ fan[1-*]_min Fan minimum value
|
|||
Unit: revolution/min (RPM)
|
||||
RW
|
||||
|
||||
fan[1-*]_max Fan maximum value
|
||||
Unit: revolution/min (RPM)
|
||||
Only rarely supported by the hardware.
|
||||
RW
|
||||
|
||||
fan[1-*]_input Fan input value.
|
||||
Unit: revolution/min (RPM)
|
||||
RO
|
||||
|
|
@ -390,6 +395,7 @@ OR
|
|||
in[0-*]_min_alarm
|
||||
in[0-*]_max_alarm
|
||||
fan[1-*]_min_alarm
|
||||
fan[1-*]_max_alarm
|
||||
temp[1-*]_min_alarm
|
||||
temp[1-*]_max_alarm
|
||||
temp[1-*]_crit_alarm
|
||||
|
|
|
|||
|
|
@ -18,8 +18,12 @@ Usage
|
|||
Anonymous finger details are sent sequentially as separate packets of ABS
|
||||
events. Only the ABS_MT events are recognized as part of a finger
|
||||
packet. The end of a packet is marked by calling the input_mt_sync()
|
||||
function, which generates a SYN_MT_REPORT event. The end of multi-touch
|
||||
transfer is marked by calling the usual input_sync() function.
|
||||
function, which generates a SYN_MT_REPORT event. This instructs the
|
||||
receiver to accept the data for the current finger and prepare to receive
|
||||
another. The end of a multi-touch transfer is marked by calling the usual
|
||||
input_sync() function. This instructs the receiver to act upon events
|
||||
accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
|
||||
set of events/packets.
|
||||
|
||||
A set of ABS_MT events with the desired properties is defined. The events
|
||||
are divided into categories, to allow for partial implementation. The
|
||||
|
|
@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
|
|||
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
|
||||
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
|
||||
of the approaching finger. Anisotropy and direction may be specified with
|
||||
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
|
||||
more granular information may specify general shapes as blobs, i.e., as a
|
||||
sequence of rectangular shapes grouped together by an
|
||||
ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
|
||||
whether the touching tool is a finger or a pen or something else.
|
||||
ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
|
||||
ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
|
||||
finger or a pen or something else. Devices with more granular information
|
||||
may specify general shapes as blobs, i.e., as a sequence of rectangular
|
||||
shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
|
||||
that currently support it, the ABS_MT_TRACKING_ID event may be used to
|
||||
report finger tracking from hardware [5].
|
||||
|
||||
Here is what a minimal event sequence for a two-finger touch would look
|
||||
like:
|
||||
|
||||
ABS_MT_TOUCH_MAJOR
|
||||
ABS_MT_POSITION_X
|
||||
ABS_MT_POSITION_Y
|
||||
SYN_MT_REPORT
|
||||
ABS_MT_TOUCH_MAJOR
|
||||
ABS_MT_POSITION_X
|
||||
ABS_MT_POSITION_Y
|
||||
SYN_MT_REPORT
|
||||
SYN_REPORT
|
||||
|
||||
|
||||
Event Semantics
|
||||
|
|
@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
|
|||
|
||||
The length of the major axis of the contact. The length should be given in
|
||||
surface units. If the surface has an X times Y resolution, the largest
|
||||
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
|
||||
possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
|
||||
|
||||
ABS_MT_TOUCH_MINOR
|
||||
|
||||
The length, in surface units, of the minor axis of the contact. If the
|
||||
contact is circular, this event can be omitted.
|
||||
contact is circular, this event can be omitted [4].
|
||||
|
||||
ABS_MT_WIDTH_MAJOR
|
||||
|
||||
The length, in surface units, of the major axis of the approaching
|
||||
tool. This should be understood as the size of the tool itself. The
|
||||
orientation of the contact and the approaching tool are assumed to be the
|
||||
same.
|
||||
same [4].
|
||||
|
||||
ABS_MT_WIDTH_MINOR
|
||||
|
||||
The length, in surface units, of the minor axis of the approaching
|
||||
tool. Omit if circular.
|
||||
tool. Omit if circular [4].
|
||||
|
||||
The above four values can be used to derive additional information about
|
||||
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
|
||||
|
|
@ -70,14 +89,17 @@ different characteristic widths [1].
|
|||
|
||||
ABS_MT_ORIENTATION
|
||||
|
||||
The orientation of the ellipse. The value should describe half a revolution
|
||||
clockwise around the touch center. The scale of the value is arbitrary, but
|
||||
zero should be returned for an ellipse aligned along the Y axis of the
|
||||
surface. As an example, an index finger placed straight onto the axis could
|
||||
return zero orientation, something negative when twisted to the left, and
|
||||
something positive when twisted to the right. This value can be omitted if
|
||||
the touching object is circular, or if the information is not available in
|
||||
the kernel driver.
|
||||
The orientation of the ellipse. The value should describe a signed quarter
|
||||
of a revolution clockwise around the touch center. The signed value range
|
||||
is arbitrary, but zero should be returned for a finger aligned along the Y
|
||||
axis of the surface, a negative value when finger is turned to the left, and
|
||||
a positive value when finger turned to the right. When completely aligned with
|
||||
the X axis, the range max should be returned. Orientation can be omitted
|
||||
if the touching object is circular, or if the information is not available
|
||||
in the kernel driver. Partial orientation support is possible if the device
|
||||
can distinguish between the two axis, but not (uniquely) any values in
|
||||
between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
|
||||
[4].
|
||||
|
||||
ABS_MT_POSITION_X
|
||||
|
||||
|
|
@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
|
|||
|
||||
The BLOB_ID groups several packets together into one arbitrarily shaped
|
||||
contact. This is a low-level anonymous grouping, and should not be confused
|
||||
with the high-level contactID, explained below. Most kernel drivers will
|
||||
not have this capability, and can safely omit the event.
|
||||
with the high-level trackingID [5]. Most kernel drivers will not have blob
|
||||
capability, and can safely omit the event.
|
||||
|
||||
ABS_MT_TRACKING_ID
|
||||
|
||||
The TRACKING_ID identifies an initiated contact throughout its life cycle
|
||||
[5]. There are currently only a few devices that support it, so this event
|
||||
should normally be omitted.
|
||||
|
||||
|
||||
Event Computation
|
||||
-----------------
|
||||
|
||||
The flora of different hardware unavoidably leads to some devices fitting
|
||||
better to the MT protocol than others. To simplify and unify the mapping,
|
||||
this section gives recipes for how to compute certain events.
|
||||
|
||||
For devices reporting contacts as rectangular shapes, signed orientation
|
||||
cannot be obtained. Assuming X and Y are the lengths of the sides of the
|
||||
touching rectangle, here is a simple formula that retains the most
|
||||
information possible:
|
||||
|
||||
ABS_MT_TOUCH_MAJOR := max(X, Y)
|
||||
ABS_MT_TOUCH_MINOR := min(X, Y)
|
||||
ABS_MT_ORIENTATION := bool(X > Y)
|
||||
|
||||
The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
|
||||
the device can distinguish between a finger along the Y axis (0) and a
|
||||
finger along the X axis (1).
|
||||
|
||||
|
||||
Finger Tracking
|
||||
|
|
@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
|
|||
anonymous contacts currently on the surface. The order in which the packets
|
||||
appear in the event stream is not important.
|
||||
|
||||
The process of finger tracking, i.e., to assign a unique contactID to each
|
||||
The process of finger tracking, i.e., to assign a unique trackingID to each
|
||||
initiated contact on the surface, is left to user space; preferably the
|
||||
multi-touch X driver [3]. In that driver, the contactID stays the same and
|
||||
multi-touch X driver [3]. In that driver, the trackingID stays the same and
|
||||
unique until the contact vanishes (when the finger leaves the surface). The
|
||||
problem of assigning a set of anonymous fingers to a set of identified
|
||||
fingers is a euclidian bipartite matching problem at each event update, and
|
||||
relies on a sufficiently rapid update rate.
|
||||
|
||||
There are a few devices that support trackingID in hardware. User space can
|
||||
make use of these native identifiers to reduce bandwidth and cpu usage.
|
||||
|
||||
|
||||
Notes
|
||||
-----
|
||||
|
||||
|
|
@ -136,5 +189,7 @@ could be used to derive tilt.
|
|||
time of writing (April 2009), the MT protocol is not yet merged, and the
|
||||
prototype implements finger matching, basic mouse support and two-finger
|
||||
scrolling. The project aims at improving the quality of current multi-touch
|
||||
functionality available in the synaptics X driver, and in addition
|
||||
functionality available in the Synaptics X driver, and in addition
|
||||
implement more advanced gestures.
|
||||
[4] See the section on event computation.
|
||||
[5] See the section on finger tracking.
|
||||
|
|
|
|||
|
|
@ -56,7 +56,6 @@ parameter is applicable:
|
|||
ISAPNP ISA PnP code is enabled.
|
||||
ISDN Appropriate ISDN support is enabled.
|
||||
JOY Appropriate joystick support is enabled.
|
||||
KMEMTRACE kmemtrace is enabled.
|
||||
LIBATA Libata driver is enabled
|
||||
LP Printer support is enabled.
|
||||
LOOP Loopback device support is enabled.
|
||||
|
|
@ -329,11 +328,6 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
flushed before they will be reused, which
|
||||
is a lot of faster
|
||||
|
||||
amd_iommu_size= [HW,X86-64]
|
||||
Define the size of the aperture for the AMD IOMMU
|
||||
driver. Possible values are:
|
||||
'32M', '64M' (default), '128M', '256M', '512M', '1G'
|
||||
|
||||
amijoy.map= [HW,JOY] Amiga joystick support
|
||||
Map of devices attached to JOY0DAT and JOY1DAT
|
||||
Format: <a>,<b>
|
||||
|
|
@ -646,6 +640,13 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
DMA-API debugging code disables itself because the
|
||||
architectural default is too low.
|
||||
|
||||
dma_debug_driver=<driver_name>
|
||||
With this option the DMA-API debugging driver
|
||||
filter feature can be enabled at boot time. Just
|
||||
pass the driver to filter for as the parameter.
|
||||
The filter can be disabled or changed to another
|
||||
driver later using sysfs.
|
||||
|
||||
dscc4.setup= [NET]
|
||||
|
||||
dtc3181e= [HW,SCSI]
|
||||
|
|
@ -752,12 +753,25 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
|
||||
|
||||
ftrace=[tracer]
|
||||
[ftrace] will set and start the specified tracer
|
||||
[FTRACE] will set and start the specified tracer
|
||||
as early as possible in order to facilitate early
|
||||
boot debugging.
|
||||
|
||||
ftrace_dump_on_oops
|
||||
[ftrace] will dump the trace buffers on oops.
|
||||
[FTRACE] will dump the trace buffers on oops.
|
||||
|
||||
ftrace_filter=[function-list]
|
||||
[FTRACE] Limit the functions traced by the function
|
||||
tracer at boot up. function-list is a comma separated
|
||||
list of functions. This list can be changed at run
|
||||
time by the set_ftrace_filter file in the debugfs
|
||||
tracing directory.
|
||||
|
||||
ftrace_notrace=[function-list]
|
||||
[FTRACE] Do not trace the functions specified in
|
||||
function-list. This list can be changed at run time
|
||||
by the set_ftrace_notrace file in the debugfs
|
||||
tracing directory.
|
||||
|
||||
gamecon.map[2|3]=
|
||||
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
|
||||
|
|
@ -914,6 +928,12 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
Formt: { "sha1" | "md5" }
|
||||
default: "sha1"
|
||||
|
||||
ima_tcb [IMA]
|
||||
Load a policy which meets the needs of the Trusted
|
||||
Computing Base. This means IMA will measure all
|
||||
programs exec'd, files mmap'd for exec, and all files
|
||||
opened for read by uid=0.
|
||||
|
||||
in2000= [HW,SCSI]
|
||||
See header of drivers/scsi/in2000.c.
|
||||
|
||||
|
|
@ -1054,15 +1074,6 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
use the HighMem zone if it exists, and the Normal
|
||||
zone if it does not.
|
||||
|
||||
kmemtrace.enable= [KNL,KMEMTRACE] Format: { yes | no }
|
||||
Controls whether kmemtrace is enabled
|
||||
at boot-time.
|
||||
|
||||
kmemtrace.subbufs=n [KNL,KMEMTRACE] Overrides the number of
|
||||
subbufs kmemtrace's relay channel has. Set this
|
||||
higher than default (KMEMTRACE_N_SUBBUFS in code) if
|
||||
you experience buffer overruns.
|
||||
|
||||
kgdboc= [HW] kgdb over consoles.
|
||||
Requires a tty driver that supports console polling.
|
||||
(only serial suported for now)
|
||||
|
|
@ -1072,6 +1083,10 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
Configure the RouterBoard 532 series on-chip
|
||||
Ethernet adapter MAC address.
|
||||
|
||||
kmemleak= [KNL] Boot-time kmemleak enable/disable
|
||||
Valid arguments: on, off
|
||||
Default: on
|
||||
|
||||
kstack=N [X86] Print N words from the kernel stack
|
||||
in oops dumps.
|
||||
|
||||
|
|
@ -1535,6 +1550,10 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
register save and restore. The kernel will only save
|
||||
legacy floating-point registers on task switch.
|
||||
|
||||
noxsave [BUGS=X86] Disables x86 extended register state save
|
||||
and restore using xsave. The kernel will fallback to
|
||||
enabling legacy floating-point and sse state.
|
||||
|
||||
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
|
||||
wfi(ARM) instruction doesn't work correctly and not to
|
||||
use it. This is also useful when using JTAG debugger.
|
||||
|
|
@ -1571,6 +1590,9 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
noinitrd [RAM] Tells the kernel not to load any configured
|
||||
initial RAM disk.
|
||||
|
||||
nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
|
||||
remapping.
|
||||
|
||||
nointroute [IA-64]
|
||||
|
||||
nojitter [IA64] Disables jitter checking for ITC timers.
|
||||
|
|
@ -1656,6 +1678,14 @@ and is between 256 and 4096 characters. It is defined in the file
|
|||
oprofile.timer= [HW]
|
||||
Use timer interrupt instead of performance counters
|
||||
|
||||
oprofile.cpu_type= Force an oprofile cpu type
|
||||
This might be useful if you have an older oprofile
|
||||
userland or if you want common events.
|
||||
Format: { archperfmon }
|
||||
archperfmon: [X86] Force use of architectural
|
||||
perfmon on Intel CPUs instead of the
|
||||
CPU specific event set.
|
||||
|
||||
osst= [HW,SCSI] SCSI Tape Driver
|
||||
Format: <buffer_size>,<write_threshold>
|
||||
See also Documentation/scsi/st.txt.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,142 @@
|
|||
Kernel Memory Leak Detector
|
||||
===========================
|
||||
|
||||
Introduction
|
||||
------------
|
||||
|
||||
Kmemleak provides a way of detecting possible kernel memory leaks in a
|
||||
way similar to a tracing garbage collector
|
||||
(http://en.wikipedia.org/wiki/Garbage_collection_%28computer_science%29#Tracing_garbage_collectors),
|
||||
with the difference that the orphan objects are not freed but only
|
||||
reported via /sys/kernel/debug/kmemleak. A similar method is used by the
|
||||
Valgrind tool (memcheck --leak-check) to detect the memory leaks in
|
||||
user-space applications.
|
||||
|
||||
Usage
|
||||
-----
|
||||
|
||||
CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
|
||||
thread scans the memory every 10 minutes (by default) and prints any new
|
||||
unreferenced objects found. To trigger an intermediate scan and display
|
||||
all the possible memory leaks:
|
||||
|
||||
# mount -t debugfs nodev /sys/kernel/debug/
|
||||
# cat /sys/kernel/debug/kmemleak
|
||||
|
||||
Note that the orphan objects are listed in the order they were allocated
|
||||
and one object at the beginning of the list may cause other subsequent
|
||||
objects to be reported as orphan.
|
||||
|
||||
Memory scanning parameters can be modified at run-time by writing to the
|
||||
/sys/kernel/debug/kmemleak file. The following parameters are supported:
|
||||
|
||||
off - disable kmemleak (irreversible)
|
||||
stack=on - enable the task stacks scanning
|
||||
stack=off - disable the tasks stacks scanning
|
||||
scan=on - start the automatic memory scanning thread
|
||||
scan=off - stop the automatic memory scanning thread
|
||||
scan=<secs> - set the automatic memory scanning period in seconds (0
|
||||
to disable it)
|
||||
|
||||
Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
|
||||
the kernel command line.
|
||||
|
||||
Basic Algorithm
|
||||
---------------
|
||||
|
||||
The memory allocations via kmalloc, vmalloc, kmem_cache_alloc and
|
||||
friends are traced and the pointers, together with additional
|
||||
information like size and stack trace, are stored in a prio search tree.
|
||||
The corresponding freeing function calls are tracked and the pointers
|
||||
removed from the kmemleak data structures.
|
||||
|
||||
An allocated block of memory is considered orphan if no pointer to its
|
||||
start address or to any location inside the block can be found by
|
||||
scanning the memory (including saved registers). This means that there
|
||||
might be no way for the kernel to pass the address of the allocated
|
||||
block to a freeing function and therefore the block is considered a
|
||||
memory leak.
|
||||
|
||||
The scanning algorithm steps:
|
||||
|
||||
1. mark all objects as white (remaining white objects will later be
|
||||
considered orphan)
|
||||
2. scan the memory starting with the data section and stacks, checking
|
||||
the values against the addresses stored in the prio search tree. If
|
||||
a pointer to a white object is found, the object is added to the
|
||||
gray list
|
||||
3. scan the gray objects for matching addresses (some white objects
|
||||
can become gray and added at the end of the gray list) until the
|
||||
gray set is finished
|
||||
4. the remaining white objects are considered orphan and reported via
|
||||
/sys/kernel/debug/kmemleak
|
||||
|
||||
Some allocated memory blocks have pointers stored in the kernel's
|
||||
internal data structures and they cannot be detected as orphans. To
|
||||
avoid this, kmemleak can also store the number of values pointing to an
|
||||
address inside the block address range that need to be found so that the
|
||||
block is not considered a leak. One example is __vmalloc().
|
||||
|
||||
Kmemleak API
|
||||
------------
|
||||
|
||||
See the include/linux/kmemleak.h header for the functions prototype.
|
||||
|
||||
kmemleak_init - initialize kmemleak
|
||||
kmemleak_alloc - notify of a memory block allocation
|
||||
kmemleak_free - notify of a memory block freeing
|
||||
kmemleak_not_leak - mark an object as not a leak
|
||||
kmemleak_ignore - do not scan or report an object as leak
|
||||
kmemleak_scan_area - add scan areas inside a memory block
|
||||
kmemleak_no_scan - do not scan a memory block
|
||||
kmemleak_erase - erase an old value in a pointer variable
|
||||
kmemleak_alloc_recursive - as kmemleak_alloc but checks the recursiveness
|
||||
kmemleak_free_recursive - as kmemleak_free but checks the recursiveness
|
||||
|
||||
Dealing with false positives/negatives
|
||||
--------------------------------------
|
||||
|
||||
The false negatives are real memory leaks (orphan objects) but not
|
||||
reported by kmemleak because values found during the memory scanning
|
||||
point to such objects. To reduce the number of false negatives, kmemleak
|
||||
provides the kmemleak_ignore, kmemleak_scan_area, kmemleak_no_scan and
|
||||
kmemleak_erase functions (see above). The task stacks also increase the
|
||||
amount of false negatives and their scanning is not enabled by default.
|
||||
|
||||
The false positives are objects wrongly reported as being memory leaks
|
||||
(orphan). For objects known not to be leaks, kmemleak provides the
|
||||
kmemleak_not_leak function. The kmemleak_ignore could also be used if
|
||||
the memory block is known not to contain other pointers and it will no
|
||||
longer be scanned.
|
||||
|
||||
Some of the reported leaks are only transient, especially on SMP
|
||||
systems, because of pointers temporarily stored in CPU registers or
|
||||
stacks. Kmemleak defines MSECS_MIN_AGE (defaulting to 1000) representing
|
||||
the minimum age of an object to be reported as a memory leak.
|
||||
|
||||
Limitations and Drawbacks
|
||||
-------------------------
|
||||
|
||||
The main drawback is the reduced performance of memory allocation and
|
||||
freeing. To avoid other penalties, the memory scanning is only performed
|
||||
when the /sys/kernel/debug/kmemleak file is read. Anyway, this tool is
|
||||
intended for debugging purposes where the performance might not be the
|
||||
most important requirement.
|
||||
|
||||
To keep the algorithm simple, kmemleak scans for values pointing to any
|
||||
address inside a block's address range. This may lead to an increased
|
||||
number of false negatives. However, it is likely that a real memory leak
|
||||
will eventually become visible.
|
||||
|
||||
Another source of false negatives is the data stored in non-pointer
|
||||
values. In a future version, kmemleak could only scan the pointer
|
||||
members in the allocated structures. This feature would solve many of
|
||||
the false negative cases described above.
|
||||
|
||||
The tool can report false positives. These are cases where an allocated
|
||||
block doesn't need to be freed (some cases in the init_call functions),
|
||||
the pointer is calculated by other methods than the usual container_of
|
||||
macro or the pointer is stored in a location not scanned by kmemleak.
|
||||
|
||||
Page allocations and ioremap are not tracked. Only the ARM and x86
|
||||
architectures are currently supported.
|
||||
|
|
@ -31,6 +31,7 @@ Contents:
|
|||
|
||||
- Locking functions.
|
||||
- Interrupt disabling functions.
|
||||
- Sleep and wake-up functions.
|
||||
- Miscellaneous functions.
|
||||
|
||||
(*) Inter-CPU locking barrier effects.
|
||||
|
|
@ -1217,6 +1218,132 @@ barriers are required in such a situation, they must be provided from some
|
|||
other means.
|
||||
|
||||
|
||||
SLEEP AND WAKE-UP FUNCTIONS
|
||||
---------------------------
|
||||
|
||||
Sleeping and waking on an event flagged in global data can be viewed as an
|
||||
interaction between two pieces of data: the task state of the task waiting for
|
||||
the event and the global data used to indicate the event. To make sure that
|
||||
these appear to happen in the right order, the primitives to begin the process
|
||||
of going to sleep, and the primitives to initiate a wake up imply certain
|
||||
barriers.
|
||||
|
||||
Firstly, the sleeper normally follows something like this sequence of events:
|
||||
|
||||
for (;;) {
|
||||
set_current_state(TASK_UNINTERRUPTIBLE);
|
||||
if (event_indicated)
|
||||
break;
|
||||
schedule();
|
||||
}
|
||||
|
||||
A general memory barrier is interpolated automatically by set_current_state()
|
||||
after it has altered the task state:
|
||||
|
||||
CPU 1
|
||||
===============================
|
||||
set_current_state();
|
||||
set_mb();
|
||||
STORE current->state
|
||||
<general barrier>
|
||||
LOAD event_indicated
|
||||
|
||||
set_current_state() may be wrapped by:
|
||||
|
||||
prepare_to_wait();
|
||||
prepare_to_wait_exclusive();
|
||||
|
||||
which therefore also imply a general memory barrier after setting the state.
|
||||
The whole sequence above is available in various canned forms, all of which
|
||||
interpolate the memory barrier in the right place:
|
||||
|
||||
wait_event();
|
||||
wait_event_interruptible();
|
||||
wait_event_interruptible_exclusive();
|
||||
wait_event_interruptible_timeout();
|
||||
wait_event_killable();
|
||||
wait_event_timeout();
|
||||
wait_on_bit();
|
||||
wait_on_bit_lock();
|
||||
|
||||
|
||||
Secondly, code that performs a wake up normally follows something like this:
|
||||
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
or:
|
||||
|
||||
event_indicated = 1;
|
||||
wake_up_process(event_daemon);
|
||||
|
||||
A write memory barrier is implied by wake_up() and co. if and only if they wake
|
||||
something up. The barrier occurs before the task state is cleared, and so sits
|
||||
between the STORE to indicate the event and the STORE to set TASK_RUNNING:
|
||||
|
||||
CPU 1 CPU 2
|
||||
=============================== ===============================
|
||||
set_current_state(); STORE event_indicated
|
||||
set_mb(); wake_up();
|
||||
STORE current->state <write barrier>
|
||||
<general barrier> STORE current->state
|
||||
LOAD event_indicated
|
||||
|
||||
The available waker functions include:
|
||||
|
||||
complete();
|
||||
wake_up();
|
||||
wake_up_all();
|
||||
wake_up_bit();
|
||||
wake_up_interruptible();
|
||||
wake_up_interruptible_all();
|
||||
wake_up_interruptible_nr();
|
||||
wake_up_interruptible_poll();
|
||||
wake_up_interruptible_sync();
|
||||
wake_up_interruptible_sync_poll();
|
||||
wake_up_locked();
|
||||
wake_up_locked_poll();
|
||||
wake_up_nr();
|
||||
wake_up_poll();
|
||||
wake_up_process();
|
||||
|
||||
|
||||
[!] Note that the memory barriers implied by the sleeper and the waker do _not_
|
||||
order multiple stores before the wake-up with respect to loads of those stored
|
||||
values after the sleeper has called set_current_state(). For instance, if the
|
||||
sleeper does:
|
||||
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
if (event_indicated)
|
||||
break;
|
||||
__set_current_state(TASK_RUNNING);
|
||||
do_something(my_data);
|
||||
|
||||
and the waker does:
|
||||
|
||||
my_data = value;
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
there's no guarantee that the change to event_indicated will be perceived by
|
||||
the sleeper as coming after the change to my_data. In such a circumstance, the
|
||||
code on both sides must interpolate its own memory barriers between the
|
||||
separate data accesses. Thus the above sleeper ought to do:
|
||||
|
||||
set_current_state(TASK_INTERRUPTIBLE);
|
||||
if (event_indicated) {
|
||||
smp_rmb();
|
||||
do_something(my_data);
|
||||
}
|
||||
|
||||
and the waker should do:
|
||||
|
||||
my_data = value;
|
||||
smp_wmb();
|
||||
event_indicated = 1;
|
||||
wake_up(&event_wait_queue);
|
||||
|
||||
|
||||
MISCELLANEOUS FUNCTIONS
|
||||
-----------------------
|
||||
|
||||
|
|
@ -1366,7 +1493,7 @@ WHERE ARE MEMORY BARRIERS NEEDED?
|
|||
|
||||
Under normal operation, memory operation reordering is generally not going to
|
||||
be a problem as a single-threaded linear piece of code will still appear to
|
||||
work correctly, even if it's in an SMP kernel. There are, however, three
|
||||
work correctly, even if it's in an SMP kernel. There are, however, four
|
||||
circumstances in which reordering definitely _could_ be a problem:
|
||||
|
||||
(*) Interprocessor interaction.
|
||||
|
|
|
|||
|
|
@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
|
|||
sctp_wmem - vector of 3 INTEGERs: min, default, max
|
||||
See tcp_wmem for a description.
|
||||
|
||||
UNDOCUMENTED:
|
||||
|
||||
/proc/sys/net/core/*
|
||||
dev_weight FIXME
|
||||
dev_weight - INTEGER
|
||||
The maximum number of packets that kernel can handle on a NAPI
|
||||
interrupt, it's a Per-CPU variable.
|
||||
|
||||
Default: 64
|
||||
|
||||
/proc/sys/net/unix/*
|
||||
max_dgram_qlen FIXME
|
||||
max_dgram_qlen - INTEGER
|
||||
The maximum length of dgram socket receive queue
|
||||
|
||||
Default: 10
|
||||
|
||||
|
||||
UNDOCUMENTED:
|
||||
|
||||
/proc/sys/net/irda/*
|
||||
fast_poll_increase FIXME
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
CONTENTS
|
||||
========
|
||||
|
||||
0. WARNING
|
||||
1. Overview
|
||||
1.1 The problem
|
||||
1.2 The solution
|
||||
|
|
@ -14,6 +15,23 @@ CONTENTS
|
|||
3. Future plans
|
||||
|
||||
|
||||
0. WARNING
|
||||
==========
|
||||
|
||||
Fiddling with these settings can result in an unstable system, the knobs are
|
||||
root only and assumes root knows what he is doing.
|
||||
|
||||
Most notable:
|
||||
|
||||
* very small values in sched_rt_period_us can result in an unstable
|
||||
system when the period is smaller than either the available hrtimer
|
||||
resolution, or the time it takes to handle the budget refresh itself.
|
||||
|
||||
* very small values in sched_rt_runtime_us can result in an unstable
|
||||
system when the runtime is so small the system has difficulty making
|
||||
forward progress (NOTE: the migration thread and kstopmachine both
|
||||
are real-time processes).
|
||||
|
||||
1. Overview
|
||||
===========
|
||||
|
||||
|
|
@ -169,7 +187,7 @@ get their allocated time.
|
|||
|
||||
Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
|
||||
the biggest challenge as the current linux PI infrastructure is geared towards
|
||||
the limited static priority levels 0-139. With deadline scheduling you need to
|
||||
the limited static priority levels 0-99. With deadline scheduling you need to
|
||||
do deadline inheritance (since priority is inversely proportional to the
|
||||
deadline delta (deadline - now).
|
||||
|
||||
|
|
|
|||
|
|
@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
|
|||
ref-no-jd Reference board without HP/Mic jack detection
|
||||
3stack D965 3stack
|
||||
5stack D965 5stack + SPDIF
|
||||
5stack-no-fp D965 5stack without front panel
|
||||
dell-3stack Dell Dimension E520
|
||||
dell-bios Fixes with Dell BIOS setup
|
||||
auto BIOS setup (default)
|
||||
|
|
|
|||
|
|
@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
|
|||
When this value is greater than 1, the driver will show the
|
||||
stack trace additionally. This may help the debugging.
|
||||
|
||||
Since 2.6.30, this option also enables the hwptr check using
|
||||
jiffies. This detects spontaneous invalid pointer callback
|
||||
values, but can be lead to too much corrections for a (mostly
|
||||
buggy) hardware that doesn't give smooth pointer updates.
|
||||
|
||||
card*/pcm*/sub*/info
|
||||
The general information of this PCM sub-stream.
|
||||
|
||||
|
|
|
|||
|
|
@ -32,6 +32,7 @@ show up in /proc/sys/kernel:
|
|||
- kstack_depth_to_print [ X86 only ]
|
||||
- l2cr [ PPC only ]
|
||||
- modprobe ==> Documentation/debugging-modules.txt
|
||||
- modules_disabled
|
||||
- msgmax
|
||||
- msgmnb
|
||||
- msgmni
|
||||
|
|
@ -184,6 +185,16 @@ kernel stack.
|
|||
|
||||
==============================================================
|
||||
|
||||
modules_disabled:
|
||||
|
||||
A toggle value indicating if modules are allowed to be loaded
|
||||
in an otherwise modular kernel. This toggle defaults to off
|
||||
(0), but can be set true (1). Once true, modules can be
|
||||
neither loaded nor unloaded, and the toggle cannot be set back
|
||||
to false.
|
||||
|
||||
==============================================================
|
||||
|
||||
osrelease, ostype & version:
|
||||
|
||||
# cat osrelease
|
||||
|
|
|
|||
|
|
@ -0,0 +1,90 @@
|
|||
Event Tracing
|
||||
|
||||
Documentation written by Theodore Ts'o
|
||||
Updated by Li Zefan
|
||||
|
||||
1. Introduction
|
||||
===============
|
||||
|
||||
Tracepoints (see Documentation/trace/tracepoints.txt) can be used
|
||||
without creating custom kernel modules to register probe functions
|
||||
using the event tracing infrastructure.
|
||||
|
||||
Not all tracepoints can be traced using the event tracing system;
|
||||
the kernel developer must provide code snippets which define how the
|
||||
tracing information is saved into the tracing buffer, and how the
|
||||
tracing information should be printed.
|
||||
|
||||
2. Using Event Tracing
|
||||
======================
|
||||
|
||||
2.1 Via the 'set_event' interface
|
||||
---------------------------------
|
||||
|
||||
The events which are available for tracing can be found in the file
|
||||
/debug/tracing/available_events.
|
||||
|
||||
To enable a particular event, such as 'sched_wakeup', simply echo it
|
||||
to /debug/tracing/set_event. For example:
|
||||
|
||||
# echo sched_wakeup >> /debug/tracing/set_event
|
||||
|
||||
[ Note: '>>' is necessary, otherwise it will firstly disable
|
||||
all the events. ]
|
||||
|
||||
To disable an event, echo the event name to the set_event file prefixed
|
||||
with an exclamation point:
|
||||
|
||||
# echo '!sched_wakeup' >> /debug/tracing/set_event
|
||||
|
||||
To disable all events, echo an empty line to the set_event file:
|
||||
|
||||
# echo > /debug/tracing/set_event
|
||||
|
||||
To enable all events, echo '*:*' or '*:' to the set_event file:
|
||||
|
||||
# echo *:* > /debug/tracing/set_event
|
||||
|
||||
The events are organized into subsystems, such as ext4, irq, sched,
|
||||
etc., and a full event name looks like this: <subsystem>:<event>. The
|
||||
subsystem name is optional, but it is displayed in the available_events
|
||||
file. All of the events in a subsystem can be specified via the syntax
|
||||
"<subsystem>:*"; for example, to enable all irq events, you can use the
|
||||
command:
|
||||
|
||||
# echo 'irq:*' > /debug/tracing/set_event
|
||||
|
||||
2.2 Via the 'enable' toggle
|
||||
---------------------------
|
||||
|
||||
The events available are also listed in /debug/tracing/events/ hierarchy
|
||||
of directories.
|
||||
|
||||
To enable event 'sched_wakeup':
|
||||
|
||||
# echo 1 > /debug/tracing/events/sched/sched_wakeup/enable
|
||||
|
||||
To disable it:
|
||||
|
||||
# echo 0 > /debug/tracing/events/sched/sched_wakeup/enable
|
||||
|
||||
To enable all events in sched subsystem:
|
||||
|
||||
# echo 1 > /debug/tracing/events/sched/enable
|
||||
|
||||
To eanble all events:
|
||||
|
||||
# echo 1 > /debug/tracing/events/enable
|
||||
|
||||
When reading one of these enable files, there are four results:
|
||||
|
||||
0 - all events this file affects are disabled
|
||||
1 - all events this file affects are enabled
|
||||
X - there is a mixture of events enabled and disabled
|
||||
? - this file does not affect any event
|
||||
|
||||
3. Defining an event-enabled tracepoint
|
||||
=======================================
|
||||
|
||||
See The example provided in samples/trace_events
|
||||
|
||||
|
|
@ -179,7 +179,7 @@ Here is the list of current tracers that may be configured.
|
|||
|
||||
Function call tracer to trace all kernel functions.
|
||||
|
||||
"function_graph_tracer"
|
||||
"function_graph"
|
||||
|
||||
Similar to the function tracer except that the
|
||||
function tracer probes the functions on their entry
|
||||
|
|
@ -518,9 +518,18 @@ priority with zero (0) being the highest priority and the nice
|
|||
values starting at 100 (nice -20). Below is a quick chart to map
|
||||
the kernel priority to user land priorities.
|
||||
|
||||
Kernel priority: 0 to 99 ==> user RT priority 99 to 0
|
||||
Kernel priority: 100 to 139 ==> user nice -20 to 19
|
||||
Kernel priority: 140 ==> idle task priority
|
||||
Kernel Space User Space
|
||||
===============================================================
|
||||
0(high) to 98(low) user RT priority 99(high) to 1(low)
|
||||
with SCHED_RR or SCHED_FIFO
|
||||
---------------------------------------------------------------
|
||||
99 sched_priority is not used in scheduling
|
||||
decisions(it must be specified as 0)
|
||||
---------------------------------------------------------------
|
||||
100(high) to 139(low) user nice -20(high) to 19(low)
|
||||
---------------------------------------------------------------
|
||||
140 idle task priority
|
||||
---------------------------------------------------------------
|
||||
|
||||
The task states are:
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
The power tracer collects detailed information about C-state and P-state
|
||||
transitions, instead of just looking at the high-level "average"
|
||||
information.
|
||||
|
||||
There is a helper script found in scrips/tracing/power.pl in the kernel
|
||||
sources which can be used to parse this information and create a
|
||||
Scalable Vector Graphics (SVG) picture from the trace data.
|
||||
|
||||
To use this tracer:
|
||||
|
||||
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
echo power > /sys/kernel/debug/tracing/current_tracer
|
||||
echo 1 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
sleep 1
|
||||
echo 0 > /sys/kernel/debug/tracing/tracing_enabled
|
||||
cat /sys/kernel/debug/tracing/trace | \
|
||||
perl scripts/tracing/power.pl > out.sv
|
||||
|
|
@ -50,6 +50,10 @@ Protocol 2.08: (Kernel 2.6.26) Added crc32 checksum and ELF format
|
|||
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical
|
||||
pointer to single linked list of struct setup_data.
|
||||
|
||||
Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
|
||||
beyond the kernel_alignment added, new init_size and
|
||||
pref_address fields. Added extended boot loader IDs.
|
||||
|
||||
**** MEMORY LAYOUT
|
||||
|
||||
The traditional memory map for the kernel loader, used for Image or
|
||||
|
|
@ -168,12 +172,13 @@ Offset Proto Name Meaning
|
|||
021C/4 2.00+ ramdisk_size initrd size (set by boot loader)
|
||||
0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only
|
||||
0224/2 2.01+ heap_end_ptr Free memory after setup end
|
||||
0226/2 N/A pad1 Unused
|
||||
0226/1 2.02+(3 ext_loader_ver Extended boot loader version
|
||||
0227/1 2.02+(3 ext_loader_type Extended boot loader ID
|
||||
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
|
||||
022C/4 2.03+ ramdisk_max Highest legal initrd address
|
||||
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
|
||||
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
|
||||
0235/1 N/A pad2 Unused
|
||||
0235/1 2.10+ min_alignment Minimum alignment, as a power of two
|
||||
0236/2 N/A pad3 Unused
|
||||
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
|
||||
023C/4 2.07+ hardware_subarch Hardware subarchitecture
|
||||
|
|
@ -182,6 +187,8 @@ Offset Proto Name Meaning
|
|||
024C/4 2.08+ payload_length Length of kernel payload
|
||||
0250/8 2.09+ setup_data 64-bit physical pointer to linked list
|
||||
of struct setup_data
|
||||
0258/8 2.10+ pref_address Preferred loading address
|
||||
0260/4 2.10+ init_size Linear memory required during initialization
|
||||
|
||||
(1) For backwards compatibility, if the setup_sects field contains 0, the
|
||||
real value is 4.
|
||||
|
|
@ -190,6 +197,8 @@ Offset Proto Name Meaning
|
|||
field are unusable, which means the size of a bzImage kernel
|
||||
cannot be determined.
|
||||
|
||||
(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
|
||||
|
||||
If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
|
||||
the boot protocol version is "old". Loading an old kernel, the
|
||||
following parameters should be assumed:
|
||||
|
|
@ -343,18 +352,32 @@ Protocol: 2.00+
|
|||
0xTV here, where T is an identifier for the boot loader and V is
|
||||
a version number. Otherwise, enter 0xFF here.
|
||||
|
||||
For boot loader IDs above T = 0xD, write T = 0xE to this field and
|
||||
write the extended ID minus 0x10 to the ext_loader_type field.
|
||||
Similarly, the ext_loader_ver field can be used to provide more than
|
||||
four bits for the bootloader version.
|
||||
|
||||
For example, for T = 0x15, V = 0x234, write:
|
||||
|
||||
type_of_loader <- 0xE4
|
||||
ext_loader_type <- 0x05
|
||||
ext_loader_ver <- 0x23
|
||||
|
||||
Assigned boot loader ids:
|
||||
0 LILO (0x00 reserved for pre-2.00 bootloader)
|
||||
1 Loadlin
|
||||
2 bootsect-loader (0x20, all other values reserved)
|
||||
3 SYSLINUX
|
||||
4 EtherBoot
|
||||
3 Syslinux
|
||||
4 Etherboot/gPXE
|
||||
5 ELILO
|
||||
7 GRUB
|
||||
8 U-BOOT
|
||||
8 U-Boot
|
||||
9 Xen
|
||||
A Gujin
|
||||
B Qemu
|
||||
C Arcturus Networks uCbootloader
|
||||
E Extended (see ext_loader_type)
|
||||
F Special (0xFF = undefined)
|
||||
|
||||
Please contact <hpa@zytor.com> if you need a bootloader ID
|
||||
value assigned.
|
||||
|
|
@ -453,6 +476,35 @@ Protocol: 2.01+
|
|||
Set this field to the offset (from the beginning of the real-mode
|
||||
code) of the end of the setup stack/heap, minus 0x0200.
|
||||
|
||||
Field name: ext_loader_ver
|
||||
Type: write (optional)
|
||||
Offset/size: 0x226/1
|
||||
Protocol: 2.02+
|
||||
|
||||
This field is used as an extension of the version number in the
|
||||
type_of_loader field. The total version number is considered to be
|
||||
(type_of_loader & 0x0f) + (ext_loader_ver << 4).
|
||||
|
||||
The use of this field is boot loader specific. If not written, it
|
||||
is zero.
|
||||
|
||||
Kernels prior to 2.6.31 did not recognize this field, but it is safe
|
||||
to write for protocol version 2.02 or higher.
|
||||
|
||||
Field name: ext_loader_type
|
||||
Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0)
|
||||
Offset/size: 0x227/1
|
||||
Protocol: 2.02+
|
||||
|
||||
This field is used as an extension of the type number in
|
||||
type_of_loader field. If the type in type_of_loader is 0xE, then
|
||||
the actual type is (ext_loader_type + 0x10).
|
||||
|
||||
This field is ignored if the type in type_of_loader is not 0xE.
|
||||
|
||||
Kernels prior to 2.6.31 did not recognize this field, but it is safe
|
||||
to write for protocol version 2.02 or higher.
|
||||
|
||||
Field name: cmd_line_ptr
|
||||
Type: write (obligatory)
|
||||
Offset/size: 0x228/4
|
||||
|
|
@ -482,11 +534,19 @@ Protocol: 2.03+
|
|||
0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
|
||||
|
||||
Field name: kernel_alignment
|
||||
Type: read (reloc)
|
||||
Type: read/modify (reloc)
|
||||
Offset/size: 0x230/4
|
||||
Protocol: 2.05+
|
||||
Protocol: 2.05+ (read), 2.10+ (modify)
|
||||
|
||||
Alignment unit required by the kernel (if relocatable_kernel is true.)
|
||||
Alignment unit required by the kernel (if relocatable_kernel is
|
||||
true.) A relocatable kernel that is loaded at an alignment
|
||||
incompatible with the value in this field will be realigned during
|
||||
kernel initialization.
|
||||
|
||||
Starting with protocol version 2.10, this reflects the kernel
|
||||
alignment preferred for optimal performance; it is possible for the
|
||||
loader to modify this field to permit a lesser alignment. See the
|
||||
min_alignment and pref_address field below.
|
||||
|
||||
Field name: relocatable_kernel
|
||||
Type: read (reloc)
|
||||
|
|
@ -498,6 +558,22 @@ Protocol: 2.05+
|
|||
After loading, the boot loader must set the code32_start field to
|
||||
point to the loaded code, or to a boot loader hook.
|
||||
|
||||
Field name: min_alignment
|
||||
Type: read (reloc)
|
||||
Offset/size: 0x235/1
|
||||
Protocol: 2.10+
|
||||
|
||||
This field, if nonzero, indicates as a power of two the minimum
|
||||
alignment required, as opposed to preferred, by the kernel to boot.
|
||||
If a boot loader makes use of this field, it should update the
|
||||
kernel_alignment field with the alignment unit desired; typically:
|
||||
|
||||
kernel_alignment = 1 << min_alignment
|
||||
|
||||
There may be a considerable performance cost with an excessively
|
||||
misaligned kernel. Therefore, a loader should typically try each
|
||||
power-of-two alignment from kernel_alignment down to this alignment.
|
||||
|
||||
Field name: cmdline_size
|
||||
Type: read
|
||||
Offset/size: 0x238/4
|
||||
|
|
@ -582,6 +658,36 @@ Protocol: 2.09+
|
|||
sure to consider the case where the linked list already contains
|
||||
entries.
|
||||
|
||||
Field name: pref_address
|
||||
Type: read (reloc)
|
||||
Offset/size: 0x258/8
|
||||
Protocol: 2.10+
|
||||
|
||||
This field, if nonzero, represents a preferred load address for the
|
||||
kernel. A relocating bootloader should attempt to load at this
|
||||
address if possible.
|
||||
|
||||
A non-relocatable kernel will unconditionally move itself and to run
|
||||
at this address.
|
||||
|
||||
Field name: init_size
|
||||
Type: read
|
||||
Offset/size: 0x25c/4
|
||||
|
||||
This field indicates the amount of linear contiguous memory starting
|
||||
at the kernel runtime start address that the kernel needs before it
|
||||
is capable of examining its memory map. This is not the same thing
|
||||
as the total amount of memory the kernel needs to boot, but it can
|
||||
be used by a relocating boot loader to help select a safe load
|
||||
address for the kernel.
|
||||
|
||||
The kernel runtime start address is determined by the following algorithm:
|
||||
|
||||
if (relocatable_kernel)
|
||||
runtime_start = align_up(load_address, kernel_alignment)
|
||||
else
|
||||
runtime_start = pref_address
|
||||
|
||||
|
||||
**** THE IMAGE CHECKSUM
|
||||
|
||||
|
|
|
|||
|
|
@ -150,11 +150,6 @@ NUMA
|
|||
Otherwise, the remaining system RAM is allocated to an
|
||||
additional node.
|
||||
|
||||
numa=hotadd=percent
|
||||
Only allow hotadd memory to preallocate page structures upto
|
||||
percent of already available memory.
|
||||
numa=hotadd=0 will disable hotadd memory.
|
||||
|
||||
ACPI
|
||||
|
||||
acpi=off Don't enable ACPI
|
||||
|
|
|
|||
|
|
@ -6,10 +6,11 @@ Virtual memory map with 4 level page tables:
|
|||
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
|
||||
hole caused by [48:63] sign extension
|
||||
ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
|
||||
ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
|
||||
ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
|
||||
ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
|
||||
ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
|
||||
ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
|
||||
ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
|
||||
ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
|
||||
ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
|
||||
ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
|
||||
... unused hole ...
|
||||
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
|
||||
ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
|
||||
|
|
|
|||
81
MAINTAINERS
81
MAINTAINERS
|
|
@ -71,7 +71,7 @@ P: Person
|
|||
M: Mail patches to
|
||||
L: Mailing list that is relevant to this area
|
||||
W: Web-page with status/info
|
||||
T: SCM tree type and location. Type is one of: git, hg, quilt.
|
||||
T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
|
||||
S: Status, one of the following:
|
||||
|
||||
Supported: Someone is actually paid to look after this.
|
||||
|
|
@ -159,7 +159,8 @@ F: drivers/net/r8169.c
|
|||
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
|
||||
L: linux-serial@vger.kernel.org
|
||||
W: http://serial.sourceforge.net
|
||||
S: Orphan
|
||||
M: alan@lxorguk.ukuu.org.uk
|
||||
S: Odd Fixes
|
||||
F: drivers/serial/8250*
|
||||
F: include/linux/serial_8250.h
|
||||
|
||||
|
|
@ -434,7 +435,7 @@ F: arch/alpha/
|
|||
|
||||
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
|
||||
P: Thomas Dahlmann
|
||||
M: thomas.dahlmann@amd.com
|
||||
M: dahlmann.thomas@arcor.de
|
||||
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: drivers/usb/gadget/amd5536udc.*
|
||||
|
|
@ -624,6 +625,7 @@ M: paulius.zaleckas@teltonika.lt
|
|||
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
|
||||
T: git git://gitorious.org/linux-gemini/mainline.git
|
||||
S: Maintained
|
||||
F: arch/arm/mach-gemini/
|
||||
|
||||
ARM/EBSA110 MACHINE SUPPORT
|
||||
P: Russell King
|
||||
|
|
@ -650,6 +652,7 @@ P: Paulius Zaleckas
|
|||
M: paulius.zaleckas@teltonika.lt
|
||||
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
|
||||
S: Maintained
|
||||
F: arch/arm/mm/*-fa*
|
||||
|
||||
ARM/FOOTBRIDGE ARCHITECTURE
|
||||
P: Russell King
|
||||
|
|
@ -1132,17 +1135,17 @@ F: fs/bfs/
|
|||
F: include/linux/bfs_fs.h
|
||||
|
||||
BLACKFIN ARCHITECTURE
|
||||
P: Bryan Wu
|
||||
M: cooloney@kernel.org
|
||||
P: Mike Frysinger
|
||||
M: vapier@gentoo.org
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: arch/blackfin/
|
||||
|
||||
BLACKFIN EMAC DRIVER
|
||||
P: Bryan Wu
|
||||
M: cooloney@kernel.org
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
P: Michael Hennerich
|
||||
M: michael.hennerich@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/net/bfin_mac.*
|
||||
|
|
@ -1150,7 +1153,7 @@ F: drivers/net/bfin_mac.*
|
|||
BLACKFIN RTC DRIVER
|
||||
P: Mike Frysinger
|
||||
M: vapier.adi@gmail.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/rtc/rtc-bfin.c
|
||||
|
|
@ -1158,7 +1161,7 @@ F: drivers/rtc/rtc-bfin.c
|
|||
BLACKFIN SERIAL DRIVER
|
||||
P: Sonic Zhang
|
||||
M: sonic.zhang@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/serial/bfin_5xx.c
|
||||
|
|
@ -1166,7 +1169,7 @@ F: drivers/serial/bfin_5xx.c
|
|||
BLACKFIN WATCHDOG DRIVER
|
||||
P: Mike Frysinger
|
||||
M: vapier.adi@gmail.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org
|
||||
S: Supported
|
||||
F: drivers/watchdog/bfin_wdt.c
|
||||
|
|
@ -1174,7 +1177,7 @@ F: drivers/watchdog/bfin_wdt.c
|
|||
BLACKFIN I2C TWI DRIVER
|
||||
P: Sonic Zhang
|
||||
M: sonic.zhang@analog.com
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
|
||||
L: uclinux-dist-devel@blackfin.uclinux.org
|
||||
W: http://blackfin.uclinux.org/
|
||||
S: Supported
|
||||
F: drivers/i2c/busses/i2c-bfin-twi.c
|
||||
|
|
@ -1540,6 +1543,13 @@ W: http://www.fi.muni.cz/~kas/cosa/
|
|||
S: Maintained
|
||||
F: drivers/net/wan/cosa*
|
||||
|
||||
CPMAC ETHERNET DRIVER
|
||||
P: Florian Fainelli
|
||||
M: florian@openwrt.org
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/net/cpmac.c
|
||||
|
||||
CPU FREQUENCY DRIVERS
|
||||
P: Dave Jones
|
||||
M: davej@redhat.com
|
||||
|
|
@ -1792,10 +1802,10 @@ F: drivers/char/epca*
|
|||
F: drivers/char/digi*
|
||||
|
||||
DIRECTORY NOTIFICATION (DNOTIFY)
|
||||
P: Stephen Rothwell
|
||||
M: sfr@canb.auug.org.au
|
||||
P: Eric Paris
|
||||
M: eparis@parisplace.org
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Supported
|
||||
S: Maintained
|
||||
F: Documentation/filesystems/dnotify.txt
|
||||
F: fs/notify/dnotify/
|
||||
F: include/linux/dnotify.h
|
||||
|
|
@ -1969,10 +1979,20 @@ F: Documentation/edac.txt
|
|||
F: drivers/edac/edac_*
|
||||
F: include/linux/edac.h
|
||||
|
||||
EDAC-AMD64
|
||||
P: Doug Thompson
|
||||
M: dougthompson@xmission.com
|
||||
P: Borislav Petkov
|
||||
M: borislav.petkov@amd.com
|
||||
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
|
||||
W: bluesmoke.sourceforge.net
|
||||
S: Supported
|
||||
F: drivers/edac/amd64_edac*
|
||||
|
||||
EDAC-E752X
|
||||
P: Mark Gross
|
||||
P: Doug Thompson
|
||||
M: mark.gross@intel.com
|
||||
P: Doug Thompson
|
||||
M: dougthompson@xmission.com
|
||||
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
|
||||
W: bluesmoke.sourceforge.net
|
||||
|
|
@ -2249,7 +2269,7 @@ P: Li Yang
|
|||
M: leoli@freescale.com
|
||||
P: Zhang Wei
|
||||
M: zw@zh-kernel.org
|
||||
L: linuxppc-embedded@ozlabs.org
|
||||
L: linuxppc-dev@ozlabs.org
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: drivers/dma/fsldma.*
|
||||
|
|
@ -2838,6 +2858,8 @@ P: John McCutchan
|
|||
M: john@johnmccutchan.com
|
||||
P: Robert Love
|
||||
M: rlove@rlove.org
|
||||
P: Eric Paris
|
||||
M: eparis@parisplace.org
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/filesystems/inotify.txt
|
||||
|
|
@ -3350,6 +3372,12 @@ F: Documentation/trace/kmemtrace.txt
|
|||
F: include/trace/kmemtrace.h
|
||||
F: kernel/trace/kmemtrace.c
|
||||
|
||||
KMEMLEAK
|
||||
P: Catalin Marinas
|
||||
M: catalin.marinas@arm.com
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
|
||||
KPROBES
|
||||
P: Ananth N Mavinakayanahalli
|
||||
M: ananth@in.ibm.com
|
||||
|
|
@ -4383,6 +4411,16 @@ S: Maintained
|
|||
F: include/linux/delayacct.h
|
||||
F: kernel/delayacct.c
|
||||
|
||||
PERFORMANCE COUNTER SUBSYSTEM
|
||||
P: Peter Zijlstra
|
||||
M: a.p.zijlstra@chello.nl
|
||||
P: Paul Mackerras
|
||||
M: paulus@samba.org
|
||||
P: Ingo Molnar
|
||||
M: mingo@elte.hu
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Supported
|
||||
|
||||
PERSONALITY HANDLING
|
||||
P: Christoph Hellwig
|
||||
M: hch@infradead.org
|
||||
|
|
@ -5587,6 +5625,14 @@ M: ian@mnementh.co.uk
|
|||
S: Maintained
|
||||
F: drivers/mmc/host/tmio_mmc.*
|
||||
|
||||
TMPFS (SHMEM FILESYSTEM)
|
||||
P: Hugh Dickins
|
||||
M: hugh.dickins@tiscali.co.uk
|
||||
L: linux-mm@kvack.org
|
||||
S: Maintained
|
||||
F: include/linux/shmem_fs.h
|
||||
F: mm/shmem.c
|
||||
|
||||
TPM DEVICE DRIVER
|
||||
P: Debora Velarde
|
||||
M: debora@linux.vnet.ibm.com
|
||||
|
|
@ -5612,6 +5658,7 @@ P: Alan Cox
|
|||
M: alan@lxorguk.ukuu.org.uk
|
||||
L: linux-kernel@vger.kernel.org
|
||||
S: Maintained
|
||||
T: stgit http://zeniv.linux.org.uk/~alan/ttydev/
|
||||
|
||||
TULIP NETWORK DRIVERS
|
||||
P: Grant Grundler
|
||||
|
|
|
|||
6
Makefile
6
Makefile
|
|
@ -1,8 +1,8 @@
|
|||
VERSION = 2
|
||||
PATCHLEVEL = 6
|
||||
SUBLEVEL = 30
|
||||
EXTRAVERSION = -rc6
|
||||
NAME = Vindictive Armadillo
|
||||
EXTRAVERSION =
|
||||
NAME = Man-Eating Seals of Antiquity
|
||||
|
||||
# *DOCUMENTATION*
|
||||
# To see a list of typical targets execute "make help"
|
||||
|
|
@ -533,7 +533,7 @@ endif
|
|||
|
||||
include $(srctree)/arch/$(SRCARCH)/Makefile
|
||||
|
||||
ifneq (CONFIG_FRAME_WARN,0)
|
||||
ifneq ($(CONFIG_FRAME_WARN),0)
|
||||
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
|
||||
endif
|
||||
|
||||
|
|
|
|||
|
|
@ -371,8 +371,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
|
|||
int retval = -EINVAL;
|
||||
char *name;
|
||||
|
||||
lock_kernel();
|
||||
|
||||
name = getname(path);
|
||||
retval = PTR_ERR(name);
|
||||
if (IS_ERR(name))
|
||||
|
|
@ -392,7 +390,6 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, char __user *, path,
|
|||
}
|
||||
putname(name);
|
||||
out:
|
||||
unlock_kernel();
|
||||
return retval;
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
|
|||
}
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&dp264_irq_lock);
|
||||
cpu_set_irq_affinity(irq, *affinity);
|
||||
tsunami_update_irq_hw(cached_irq_mask);
|
||||
spin_unlock(&dp264_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&dp264_irq_lock);
|
||||
cpu_set_irq_affinity(irq - 16, *affinity);
|
||||
tsunami_update_irq_hw(cached_irq_mask);
|
||||
spin_unlock(&dp264_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct hw_interrupt_type dp264_irq_type = {
|
||||
|
|
|
|||
|
|
@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
|
|||
|
||||
}
|
||||
|
||||
static void
|
||||
static int
|
||||
titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
|
||||
{
|
||||
spin_lock(&titan_irq_lock);
|
||||
titan_cpu_set_irq_affinity(irq - 16, *affinity);
|
||||
titan_update_irq_hw(titan_cached_irq_mask);
|
||||
spin_unlock(&titan_irq_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
|
|
|
|||
|
|
@ -273,6 +273,7 @@ config ARCH_EP93XX
|
|||
select HAVE_CLK
|
||||
select COMMON_CLKDEV
|
||||
select ARCH_REQUIRE_GPIOLIB
|
||||
select ARCH_HAS_HOLES_MEMORYMODEL
|
||||
help
|
||||
This enables support for the Cirrus EP93xx series of CPUs.
|
||||
|
||||
|
|
@ -976,10 +977,9 @@ config OABI_COMPAT
|
|||
UNPREDICTABLE (in fact it can be predicted that it won't work
|
||||
at all). If in doubt say Y.
|
||||
|
||||
config ARCH_FLATMEM_HAS_HOLES
|
||||
config ARCH_HAS_HOLES_MEMORYMODEL
|
||||
bool
|
||||
default y
|
||||
depends on FLATMEM
|
||||
default n
|
||||
|
||||
# Discontigmem is deprecated
|
||||
config ARCH_DISCONTIGMEM_ENABLE
|
||||
|
|
|
|||
|
|
@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
||||
static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
||||
{
|
||||
void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
|
||||
unsigned int shift = (irq % 4) * 8;
|
||||
|
|
@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
|
|||
val |= 1 << (cpu + shift);
|
||||
writel(val, reg);
|
||||
spin_unlock(&irq_controller_lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
|
@ -253,9 +255,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
|
|||
}
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
|
||||
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
|
||||
{
|
||||
unsigned long map = *cpus_addr(cpumask);
|
||||
unsigned long map = *cpus_addr(*mask);
|
||||
|
||||
/* this always happens on GIC0 */
|
||||
writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
|
||||
|
|
|
|||
|
|
@ -114,3 +114,16 @@
|
|||
.align 3; \
|
||||
.long 9999b,9001f; \
|
||||
.previous
|
||||
|
||||
/*
|
||||
* SMP data memory barrier
|
||||
*/
|
||||
.macro smp_dmb
|
||||
#ifdef CONFIG_SMP
|
||||
#if __LINUX_ARM_ARCH__ >= 7
|
||||
dmb
|
||||
#elif __LINUX_ARM_ARCH__ == 6
|
||||
mcr p15, 0, r0, c7, c10, 5 @ dmb
|
||||
#endif
|
||||
#endif
|
||||
.endm
|
||||
|
|
|
|||
|
|
@ -44,11 +44,29 @@ static inline void atomic_set(atomic_t *v, int i)
|
|||
: "cc");
|
||||
}
|
||||
|
||||
static inline void atomic_add(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
__asm__ __volatile__("@ atomic_add\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" add %0, %0, %3\n"
|
||||
" strex %1, %0, [%2]\n"
|
||||
" teq %1, #0\n"
|
||||
" bne 1b"
|
||||
: "=&r" (result), "=&r" (tmp)
|
||||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
}
|
||||
|
||||
static inline int atomic_add_return(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
smp_mb();
|
||||
|
||||
__asm__ __volatile__("@ atomic_add_return\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" add %0, %0, %3\n"
|
||||
|
|
@ -59,14 +77,34 @@ static inline int atomic_add_return(int i, atomic_t *v)
|
|||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
|
||||
smp_mb();
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
static inline void atomic_sub(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
__asm__ __volatile__("@ atomic_sub\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" sub %0, %0, %3\n"
|
||||
" strex %1, %0, [%2]\n"
|
||||
" teq %1, #0\n"
|
||||
" bne 1b"
|
||||
: "=&r" (result), "=&r" (tmp)
|
||||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
}
|
||||
|
||||
static inline int atomic_sub_return(int i, atomic_t *v)
|
||||
{
|
||||
unsigned long tmp;
|
||||
int result;
|
||||
|
||||
smp_mb();
|
||||
|
||||
__asm__ __volatile__("@ atomic_sub_return\n"
|
||||
"1: ldrex %0, [%2]\n"
|
||||
" sub %0, %0, %3\n"
|
||||
|
|
@ -77,6 +115,8 @@ static inline int atomic_sub_return(int i, atomic_t *v)
|
|||
: "r" (&v->counter), "Ir" (i)
|
||||
: "cc");
|
||||
|
||||
smp_mb();
|
||||
|
||||
return result;
|
||||
}
|
||||
|
||||
|
|
@ -84,6 +124,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
|
|||
{
|
||||
unsigned long oldval, res;
|
||||
|
||||
smp_mb();
|
||||
|
||||
do {
|
||||
__asm__ __volatile__("@ atomic_cmpxchg\n"
|
||||
"ldrex %1, [%2]\n"
|
||||
|
|
@ -95,6 +137,8 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
|
|||
: "cc");
|
||||
} while (res);
|
||||
|
||||
smp_mb();
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
|
|
@ -135,6 +179,7 @@ static inline int atomic_add_return(int i, atomic_t *v)
|
|||
|
||||
return val;
|
||||
}
|
||||
#define atomic_add(i, v) (void) atomic_add_return(i, v)
|
||||
|
||||
static inline int atomic_sub_return(int i, atomic_t *v)
|
||||
{
|
||||
|
|
@ -148,6 +193,7 @@ static inline int atomic_sub_return(int i, atomic_t *v)
|
|||
|
||||
return val;
|
||||
}
|
||||
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
|
||||
|
||||
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
|
||||
{
|
||||
|
|
@ -187,10 +233,8 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
|
|||
}
|
||||
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
|
||||
|
||||
#define atomic_add(i, v) (void) atomic_add_return(i, v)
|
||||
#define atomic_inc(v) (void) atomic_add_return(1, v)
|
||||
#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
|
||||
#define atomic_dec(v) (void) atomic_sub_return(1, v)
|
||||
#define atomic_inc(v) atomic_add(1, v)
|
||||
#define atomic_dec(v) atomic_sub(1, v)
|
||||
|
||||
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
|
||||
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
|
||||
|
|
@ -200,11 +244,10 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u)
|
|||
|
||||
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
|
||||
|
||||
/* Atomic operations are already serializing on ARM */
|
||||
#define smp_mb__before_atomic_dec() barrier()
|
||||
#define smp_mb__after_atomic_dec() barrier()
|
||||
#define smp_mb__before_atomic_inc() barrier()
|
||||
#define smp_mb__after_atomic_inc() barrier()
|
||||
#define smp_mb__before_atomic_dec() smp_mb()
|
||||
#define smp_mb__after_atomic_dec() smp_mb()
|
||||
#define smp_mb__before_atomic_inc() smp_mb()
|
||||
#define smp_mb__after_atomic_inc() smp_mb()
|
||||
|
||||
#include <asm-generic/atomic.h>
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -7,4 +7,20 @@
|
|||
#define L1_CACHE_SHIFT 5
|
||||
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
|
||||
|
||||
/*
|
||||
* Memory returned by kmalloc() may be used for DMA, so we must make
|
||||
* sure that all such allocations are cache aligned. Otherwise,
|
||||
* unrelated code may cause parts of the buffer to be read into the
|
||||
* cache before the transfer is done, causing old data to be seen by
|
||||
* the CPU.
|
||||
*/
|
||||
#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
|
||||
|
||||
/*
|
||||
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
|
||||
*/
|
||||
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
|
||||
#define ARCH_SLAB_MINALIGN 8
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -5,9 +5,6 @@
|
|||
#ifndef __ARM_FLAT_H__
|
||||
#define __ARM_FLAT_H__
|
||||
|
||||
/* An odd number of words will be pushed after this alignment, so
|
||||
deliberately misalign the value. */
|
||||
#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
|
||||
#define flat_argvp_envp_on_stack() 1
|
||||
#define flat_old_ram_flag(flags) (flags)
|
||||
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
|
||||
|
|
|
|||
|
|
@ -36,7 +36,7 @@
|
|||
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
|
||||
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
|
||||
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
|
||||
void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
|
||||
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -202,13 +202,6 @@ typedef struct page *pgtable_t;
|
|||
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
|
||||
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
|
||||
|
||||
/*
|
||||
* With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
|
||||
*/
|
||||
#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
|
||||
#define ARCH_SLAB_MINALIGN 8
|
||||
#endif
|
||||
|
||||
#include <asm-generic/page.h>
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
|
|||
/*
|
||||
* Raise an IPI cross call on CPUs in callmap.
|
||||
*/
|
||||
extern void smp_cross_call(cpumask_t callmap);
|
||||
|
||||
/*
|
||||
* Broadcast a timer interrupt to the other CPUs.
|
||||
*/
|
||||
extern void smp_send_timer(void);
|
||||
extern void smp_cross_call(const struct cpumask *mask);
|
||||
|
||||
/*
|
||||
* Broadcast a clock event to other CPUs.
|
||||
*/
|
||||
extern void smp_timer_broadcast(cpumask_t mask);
|
||||
extern void smp_timer_broadcast(const struct cpumask *mask);
|
||||
|
||||
/*
|
||||
* Boot a secondary CPU, and assign it the specified idle task.
|
||||
|
|
@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
|
|||
extern void platform_cpu_enable(unsigned int cpu);
|
||||
|
||||
extern void arch_send_call_function_single_ipi(int cpu);
|
||||
extern void arch_send_call_function_ipi(cpumask_t mask);
|
||||
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
|
||||
#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
|
||||
|
||||
/*
|
||||
* Local timer interrupt handling function (can be IPI'ed).
|
||||
|
|
|
|||
|
|
@ -248,6 +248,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
|
|||
unsigned int tmp;
|
||||
#endif
|
||||
|
||||
smp_mb();
|
||||
|
||||
switch (size) {
|
||||
#if __LINUX_ARM_ARCH__ >= 6
|
||||
case 1:
|
||||
|
|
@ -307,6 +309,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
|
|||
__bad_xchg(ptr, size), ret = 0;
|
||||
break;
|
||||
}
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
|
@ -316,6 +319,12 @@ extern void enable_hlt(void);
|
|||
|
||||
#include <asm-generic/cmpxchg-local.h>
|
||||
|
||||
#if __LINUX_ARM_ARCH__ < 6
|
||||
|
||||
#ifdef CONFIG_SMP
|
||||
#error "SMP is not supported on this platform"
|
||||
#endif
|
||||
|
||||
/*
|
||||
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
|
||||
* them available.
|
||||
|
|
@ -329,6 +338,173 @@ extern void enable_hlt(void);
|
|||
#include <asm-generic/cmpxchg.h>
|
||||
#endif
|
||||
|
||||
#else /* __LINUX_ARM_ARCH__ >= 6 */
|
||||
|
||||
extern void __bad_cmpxchg(volatile void *ptr, int size);
|
||||
|
||||
/*
|
||||
* cmpxchg only support 32-bits operands on ARMv6.
|
||||
*/
|
||||
|
||||
static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long oldval, res;
|
||||
|
||||
switch (size) {
|
||||
#ifdef CONFIG_CPU_32v6K
|
||||
case 1:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg1\n"
|
||||
" ldrexb %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexbeq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
case 2:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg1\n"
|
||||
" ldrexh %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexheq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
#endif /* CONFIG_CPU_32v6K */
|
||||
case 4:
|
||||
do {
|
||||
asm volatile("@ __cmpxchg4\n"
|
||||
" ldrex %1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" strexeq %0, %4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (old), "r" (new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
break;
|
||||
default:
|
||||
__bad_cmpxchg(ptr, size);
|
||||
oldval = 0;
|
||||
}
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
smp_mb();
|
||||
ret = __cmpxchg(ptr, old, new, size);
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
|
||||
(unsigned long)(o), \
|
||||
(unsigned long)(n), \
|
||||
sizeof(*(ptr))))
|
||||
|
||||
static inline unsigned long __cmpxchg_local(volatile void *ptr,
|
||||
unsigned long old,
|
||||
unsigned long new, int size)
|
||||
{
|
||||
unsigned long ret;
|
||||
|
||||
switch (size) {
|
||||
#ifndef CONFIG_CPU_32v6K
|
||||
case 1:
|
||||
case 2:
|
||||
ret = __cmpxchg_local_generic(ptr, old, new, size);
|
||||
break;
|
||||
#endif /* !CONFIG_CPU_32v6K */
|
||||
default:
|
||||
ret = __cmpxchg(ptr, old, new, size);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg_local(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
|
||||
(unsigned long)(o), \
|
||||
(unsigned long)(n), \
|
||||
sizeof(*(ptr))))
|
||||
|
||||
#ifdef CONFIG_CPU_32v6K
|
||||
|
||||
/*
|
||||
* Note : ARMv7-M (currently unsupported by Linux) does not support
|
||||
* ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
|
||||
* not be allowed to use __cmpxchg64.
|
||||
*/
|
||||
static inline unsigned long long __cmpxchg64(volatile void *ptr,
|
||||
unsigned long long old,
|
||||
unsigned long long new)
|
||||
{
|
||||
register unsigned long long oldval asm("r0");
|
||||
register unsigned long long __old asm("r2") = old;
|
||||
register unsigned long long __new asm("r4") = new;
|
||||
unsigned long res;
|
||||
|
||||
do {
|
||||
asm volatile(
|
||||
" @ __cmpxchg8\n"
|
||||
" ldrexd %1, %H1, [%2]\n"
|
||||
" mov %0, #0\n"
|
||||
" teq %1, %3\n"
|
||||
" teqeq %H1, %H3\n"
|
||||
" strexdeq %0, %4, %H4, [%2]\n"
|
||||
: "=&r" (res), "=&r" (oldval)
|
||||
: "r" (ptr), "Ir" (__old), "r" (__new)
|
||||
: "memory", "cc");
|
||||
} while (res);
|
||||
|
||||
return oldval;
|
||||
}
|
||||
|
||||
static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
|
||||
unsigned long long old,
|
||||
unsigned long long new)
|
||||
{
|
||||
unsigned long long ret;
|
||||
|
||||
smp_mb();
|
||||
ret = __cmpxchg64(ptr, old, new);
|
||||
smp_mb();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
#define cmpxchg64(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
|
||||
(unsigned long long)(o), \
|
||||
(unsigned long long)(n)))
|
||||
|
||||
#define cmpxchg64_local(ptr,o,n) \
|
||||
((__typeof__(*(ptr)))__cmpxchg64((ptr), \
|
||||
(unsigned long long)(o), \
|
||||
(unsigned long long)(n)))
|
||||
|
||||
#else /* !CONFIG_CPU_32v6K */
|
||||
|
||||
#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
|
||||
|
||||
#endif /* CONFIG_CPU_32v6K */
|
||||
|
||||
#endif /* __LINUX_ARM_ARCH__ >= 6 */
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
|
||||
#define arch_align_stack(x) (x)
|
||||
|
|
|
|||
|
|
@ -78,6 +78,15 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
|
|||
return 1;
|
||||
if (cpu_architecture() < CPU_ARCH_ARMv6)
|
||||
return 1;
|
||||
#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
|
||||
/*
|
||||
* If we have support for OABI programs, we can never allow NX
|
||||
* support - our signal syscall restart mechanism relies upon
|
||||
* being able to execute code placed on the user stack.
|
||||
*/
|
||||
return 1;
|
||||
#else
|
||||
return 0;
|
||||
#endif
|
||||
}
|
||||
EXPORT_SYMBOL(arm_elf_read_implies_exec);
|
||||
|
|
|
|||
|
|
@ -815,10 +815,7 @@ __kuser_helper_start:
|
|||
*/
|
||||
|
||||
__kuser_memory_barrier: @ 0xffff0fa0
|
||||
|
||||
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
|
||||
mcr p15, 0, r0, c7, c10, 5 @ dmb
|
||||
#endif
|
||||
smp_dmb
|
||||
usr_ret lr
|
||||
|
||||
.align 5
|
||||
|
|
|
|||
|
|
@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
|
|||
per_cpu(cpu_data, cpu).idle = current;
|
||||
}
|
||||
|
||||
static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
|
||||
static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
|
||||
{
|
||||
unsigned long flags;
|
||||
unsigned int cpu;
|
||||
|
||||
local_irq_save(flags);
|
||||
|
||||
for_each_cpu_mask(cpu, callmap) {
|
||||
for_each_cpu(cpu, mask) {
|
||||
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
|
||||
|
||||
spin_lock(&ipi->lock);
|
||||
|
|
@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
|
|||
/*
|
||||
* Call the platform specific cross-CPU call function.
|
||||
*/
|
||||
smp_cross_call(callmap);
|
||||
smp_cross_call(mask);
|
||||
|
||||
local_irq_restore(flags);
|
||||
}
|
||||
|
||||
void arch_send_call_function_ipi(cpumask_t mask)
|
||||
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
|
||||
{
|
||||
send_ipi_message(mask, IPI_CALL_FUNC);
|
||||
}
|
||||
|
||||
void arch_send_call_function_single_ipi(int cpu)
|
||||
{
|
||||
send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
|
||||
send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
|
||||
}
|
||||
|
||||
void show_ipi_list(struct seq_file *p)
|
||||
|
|
@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
|
|||
|
||||
void smp_send_reschedule(int cpu)
|
||||
{
|
||||
send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
|
||||
send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
|
||||
}
|
||||
|
||||
void smp_send_timer(void)
|
||||
{
|
||||
cpumask_t mask = cpu_online_map;
|
||||
cpu_clear(smp_processor_id(), mask);
|
||||
send_ipi_message(mask, IPI_TIMER);
|
||||
}
|
||||
|
||||
void smp_timer_broadcast(cpumask_t mask)
|
||||
void smp_timer_broadcast(const struct cpumask *mask)
|
||||
{
|
||||
send_ipi_message(mask, IPI_TIMER);
|
||||
}
|
||||
|
|
@ -517,7 +510,7 @@ void smp_send_stop(void)
|
|||
{
|
||||
cpumask_t mask = cpu_online_map;
|
||||
cpu_clear(smp_processor_id(), mask);
|
||||
send_ipi_message(mask, IPI_CPU_STOP);
|
||||
send_ipi_message(&mask, IPI_CPU_STOP);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
|
|||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int
|
||||
on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
|
||||
static void
|
||||
on_each_cpu_mask(void (*func)(void *), void *info, int wait,
|
||||
const struct cpumask *mask)
|
||||
{
|
||||
int ret = 0;
|
||||
|
||||
preempt_disable();
|
||||
|
||||
ret = smp_call_function_mask(mask, func, info, wait);
|
||||
if (cpu_isset(smp_processor_id(), mask))
|
||||
smp_call_function_many(mask, func, info, wait);
|
||||
if (cpumask_test_cpu(smp_processor_id(), mask))
|
||||
func(info);
|
||||
|
||||
preempt_enable();
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**********************************************************************/
|
||||
|
|
@ -602,20 +592,17 @@ void flush_tlb_all(void)
|
|||
|
||||
void flush_tlb_mm(struct mm_struct *mm)
|
||||
{
|
||||
cpumask_t mask = mm->cpu_vm_mask;
|
||||
|
||||
on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
|
||||
on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
|
||||
}
|
||||
|
||||
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
|
||||
{
|
||||
cpumask_t mask = vma->vm_mm->cpu_vm_mask;
|
||||
struct tlb_args ta;
|
||||
|
||||
ta.ta_vma = vma;
|
||||
ta.ta_start = uaddr;
|
||||
|
||||
on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
|
||||
on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
|
||||
}
|
||||
|
||||
void flush_tlb_kernel_page(unsigned long kaddr)
|
||||
|
|
@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
|
|||
void flush_tlb_range(struct vm_area_struct *vma,
|
||||
unsigned long start, unsigned long end)
|
||||
{
|
||||
cpumask_t mask = vma->vm_mm->cpu_vm_mask;
|
||||
struct tlb_args ta;
|
||||
|
||||
ta.ta_vma = vma;
|
||||
ta.ta_start = start;
|
||||
ta.ta_end = end;
|
||||
|
||||
on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
|
||||
on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
|
||||
}
|
||||
|
||||
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
|
||||
|
|
|
|||
|
|
@ -18,12 +18,14 @@
|
|||
mov r2, #1
|
||||
add r1, r1, r0, lsr #3 @ Get byte offset
|
||||
mov r3, r2, lsl r3 @ create mask
|
||||
smp_dmb
|
||||
1: ldrexb r2, [r1]
|
||||
ands r0, r2, r3 @ save old value of bit
|
||||
\instr r2, r2, r3 @ toggle bit
|
||||
strexb ip, r2, [r1]
|
||||
cmp ip, #0
|
||||
bne 1b
|
||||
smp_dmb
|
||||
cmp r0, #0
|
||||
movne r0, #1
|
||||
2: mov pc, lr
|
||||
|
|
|
|||
|
|
@ -21,15 +21,50 @@
|
|||
#include <asm/div64.h>
|
||||
#include <mach/hardware.h>
|
||||
|
||||
|
||||
/*
|
||||
* The EP93xx has two external crystal oscillators. To generate the
|
||||
* required high-frequency clocks, the processor uses two phase-locked-
|
||||
* loops (PLLs) to multiply the incoming external clock signal to much
|
||||
* higher frequencies that are then divided down by programmable dividers
|
||||
* to produce the needed clocks. The PLLs operate independently of one
|
||||
* another.
|
||||
*/
|
||||
#define EP93XX_EXT_CLK_RATE 14745600
|
||||
#define EP93XX_EXT_RTC_RATE 32768
|
||||
|
||||
|
||||
struct clk {
|
||||
unsigned long rate;
|
||||
int users;
|
||||
int sw_locked;
|
||||
u32 enable_reg;
|
||||
u32 enable_mask;
|
||||
|
||||
unsigned long (*get_rate)(struct clk *clk);
|
||||
};
|
||||
|
||||
static struct clk clk_uart = {
|
||||
.rate = 14745600,
|
||||
|
||||
static unsigned long get_uart_rate(struct clk *clk);
|
||||
|
||||
|
||||
static struct clk clk_uart1 = {
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_uart2 = {
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_uart3 = {
|
||||
.sw_locked = 1,
|
||||
.enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
|
||||
.enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
|
||||
.get_rate = get_uart_rate,
|
||||
};
|
||||
static struct clk clk_pll1;
|
||||
static struct clk clk_f;
|
||||
|
|
@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
|
|||
{ .dev_id = dev, .con_id = con, .clk = ck }
|
||||
|
||||
static struct clk_lookup clocks[] = {
|
||||
INIT_CK("apb:uart1", NULL, &clk_uart),
|
||||
INIT_CK("apb:uart2", NULL, &clk_uart),
|
||||
INIT_CK("apb:uart3", NULL, &clk_uart),
|
||||
INIT_CK("apb:uart1", NULL, &clk_uart1),
|
||||
INIT_CK("apb:uart2", NULL, &clk_uart2),
|
||||
INIT_CK("apb:uart3", NULL, &clk_uart3),
|
||||
INIT_CK(NULL, "pll1", &clk_pll1),
|
||||
INIT_CK(NULL, "fclk", &clk_f),
|
||||
INIT_CK(NULL, "hclk", &clk_h),
|
||||
|
|
@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
|
|||
u32 value;
|
||||
|
||||
value = __raw_readl(clk->enable_reg);
|
||||
if (clk->sw_locked)
|
||||
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
|
||||
__raw_writel(value | clk->enable_mask, clk->enable_reg);
|
||||
}
|
||||
|
||||
|
|
@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
|
|||
u32 value;
|
||||
|
||||
value = __raw_readl(clk->enable_reg);
|
||||
if (clk->sw_locked)
|
||||
__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
|
||||
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
|
||||
}
|
||||
}
|
||||
EXPORT_SYMBOL(clk_disable);
|
||||
|
||||
static unsigned long get_uart_rate(struct clk *clk)
|
||||
{
|
||||
u32 value;
|
||||
|
||||
value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
|
||||
if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
|
||||
return EP93XX_EXT_CLK_RATE;
|
||||
else
|
||||
return EP93XX_EXT_CLK_RATE / 2;
|
||||
}
|
||||
|
||||
unsigned long clk_get_rate(struct clk *clk)
|
||||
{
|
||||
if (clk->get_rate)
|
||||
return clk->get_rate(clk);
|
||||
|
||||
return clk->rate;
|
||||
}
|
||||
EXPORT_SYMBOL(clk_get_rate);
|
||||
|
|
@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
|
|||
unsigned long long rate;
|
||||
int i;
|
||||
|
||||
rate = 14745600;
|
||||
rate = EP93XX_EXT_CLK_RATE;
|
||||
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
|
||||
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
|
||||
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
|
||||
|
|
@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
|
|||
|
||||
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
|
||||
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
|
||||
clk_pll1.rate = 14745600;
|
||||
clk_pll1.rate = EP93XX_EXT_CLK_RATE;
|
||||
} else {
|
||||
clk_pll1.rate = calc_pll_rate(value);
|
||||
}
|
||||
|
|
@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
|
|||
|
||||
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
|
||||
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
|
||||
clk_pll2.rate = 14745600;
|
||||
clk_pll2.rate = EP93XX_EXT_CLK_RATE;
|
||||
} else if (value & 0x00040000) { /* PLL2 enabled? */
|
||||
clk_pll2.rate = calc_pll_rate(value);
|
||||
} else {
|
||||
|
|
|
|||
|
|
@ -159,7 +159,10 @@
|
|||
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
|
||||
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
|
||||
#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
|
||||
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
|
||||
|
||||
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
|
||||
|
|
|
|||
|
|
@ -15,10 +15,9 @@
|
|||
/*
|
||||
* Memory Map definitions
|
||||
*/
|
||||
/* FIXME: Does it really swap SRAM like this? */
|
||||
#ifdef CONFIG_GEMINI_MEM_SWAP
|
||||
# define GEMINI_DRAM_BASE 0x00000000
|
||||
# define GEMINI_SRAM_BASE 0x20000000
|
||||
# define GEMINI_SRAM_BASE 0x70000000
|
||||
#else
|
||||
# define GEMINI_SRAM_BASE 0x00000000
|
||||
# define GEMINI_DRAM_BASE 0x10000000
|
||||
|
|
|
|||
|
|
@ -121,7 +121,7 @@ static struct clk uartclk = {
|
|||
.rate = 14745600,
|
||||
};
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
{ /* UART0 */
|
||||
.dev_id = "mb:16",
|
||||
.clk = &uartclk,
|
||||
|
|
|
|||
|
|
@ -144,6 +144,9 @@ static struct platform_device kirkwood_ge00 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = kirkwood_ge00_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -202,6 +205,9 @@ static struct platform_device kirkwood_ge01 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = kirkwood_ge01_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -386,12 +392,10 @@ static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
|
|||
|
||||
static struct resource kirkwood_i2c_resources[] = {
|
||||
{
|
||||
.name = "i2c",
|
||||
.start = I2C_PHYS_BASE,
|
||||
.end = I2C_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c",
|
||||
.start = IRQ_KIRKWOOD_TWSI,
|
||||
.end = IRQ_KIRKWOOD_TWSI,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -142,6 +142,8 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
|
|||
MPP1_SPI_MOSI,
|
||||
MPP2_SPI_SCK,
|
||||
MPP3_SPI_MISO,
|
||||
MPP4_SATA1_ACTn,
|
||||
MPP5_SATA0_ACTn,
|
||||
MPP8_TW_SDA,
|
||||
MPP9_TW_SCK,
|
||||
MPP10_UART0_TXD,
|
||||
|
|
@ -150,10 +152,6 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
|
|||
MPP14_UART1_RXD, /* PIC controller */
|
||||
MPP15_GPIO, /* USB Copy button */
|
||||
MPP16_GPIO, /* Reset button */
|
||||
MPP20_SATA1_ACTn,
|
||||
MPP21_SATA0_ACTn,
|
||||
MPP22_SATA1_PRESENTn,
|
||||
MPP23_SATA0_PRESENTn,
|
||||
0
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@
|
|||
|
||||
/* IO_START and IO_BASE are defined in hardware.h */
|
||||
|
||||
#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
|
||||
#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
|
||||
#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
|
||||
|
||||
/* Define the interface to the SYS_CLOCK */
|
||||
|
|
|
|||
|
|
@ -82,6 +82,9 @@ static struct platform_device loki_ge0 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = loki_ge0_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -136,6 +139,9 @@ static struct platform_device loki_ge1 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = loki_ge1_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
|
|||
|
|
@ -3,6 +3,11 @@
|
|||
|
||||
#include <mach/mfp.h>
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x1 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x2 << 13)
|
||||
#define MFP_DRIVE_FAST (0x3 << 13)
|
||||
|
||||
/* GPIO */
|
||||
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
|
||||
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
|
||||
|
|
|
|||
|
|
@ -3,6 +3,11 @@
|
|||
|
||||
#include <mach/mfp.h>
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x2 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x4 << 13)
|
||||
#define MFP_DRIVE_FAST (0x8 << 13)
|
||||
|
||||
/* UART2 */
|
||||
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
|
||||
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
|
||||
|
|
|
|||
|
|
@ -12,16 +12,13 @@
|
|||
* possible, we make the following compromise:
|
||||
*
|
||||
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
|
||||
* 2. DRIVE strength definitions redefined to include the reserved bit10
|
||||
* 2. DRIVE strength definitions redefined to include the reserved bit
|
||||
* - the reserved bit differs between pxa168 and pxa910, and the
|
||||
* MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
|
||||
* 3. Override MFP_CFG() and MFP_CFG_DRV()
|
||||
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
|
||||
*/
|
||||
|
||||
#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
|
||||
#define MFP_DRIVE_SLOW (0x2 << 13)
|
||||
#define MFP_DRIVE_MEDIUM (0x4 << 13)
|
||||
#define MFP_DRIVE_FAST (0x8 << 13)
|
||||
|
||||
#undef MFP_CFG
|
||||
#undef MFP_CFG_DRV
|
||||
#undef MFP_CFG_LPM
|
||||
|
|
|
|||
|
|
@ -136,7 +136,7 @@ static struct clock_event_device ckevt = {
|
|||
.set_mode = timer_set_mode,
|
||||
};
|
||||
|
||||
static cycle_t clksrc_read(void)
|
||||
static cycle_t clksrc_read(struct clocksource *cs)
|
||||
{
|
||||
return timer_read();
|
||||
}
|
||||
|
|
|
|||
|
|
@ -321,6 +321,9 @@ static struct platform_device mv78xx0_ge00 = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge00_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -375,6 +378,9 @@ static struct platform_device mv78xx0_ge01 = {
|
|||
.id = 1,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge01_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -429,6 +435,9 @@ static struct platform_device mv78xx0_ge10 = {
|
|||
.id = 2,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge10_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -496,6 +505,9 @@ static struct platform_device mv78xx0_ge11 = {
|
|||
.id = 3,
|
||||
.num_resources = 1,
|
||||
.resource = mv78xx0_ge11_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -532,12 +544,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_0_pdata = {
|
|||
|
||||
static struct resource mv78xx0_i2c_0_resources[] = {
|
||||
{
|
||||
.name = "i2c 0 base",
|
||||
.start = I2C_0_PHYS_BASE,
|
||||
.end = I2C_0_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c 0 irq",
|
||||
.start = IRQ_MV78XX0_I2C_0,
|
||||
.end = IRQ_MV78XX0_I2C_0,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
@ -567,12 +577,10 @@ static struct mv64xxx_i2c_pdata mv78xx0_i2c_1_pdata = {
|
|||
|
||||
static struct resource mv78xx0_i2c_1_resources[] = {
|
||||
{
|
||||
.name = "i2c 1 base",
|
||||
.start = I2C_1_PHYS_BASE,
|
||||
.end = I2C_1_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c 1 irq",
|
||||
.start = IRQ_MV78XX0_I2C_1,
|
||||
.end = IRQ_MV78XX0_I2C_1,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -890,7 +890,7 @@ static struct clk clko_clk = {
|
|||
.con_id = n, \
|
||||
.clk = &c, \
|
||||
},
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
/* It's unlikely that any driver wants one of them directly:
|
||||
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
|
||||
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
|
||||
|
|
|
|||
|
|
@ -621,7 +621,7 @@ DEFINE_CLOCK1(csi_clk, 0, 0, 0, parent, &csi_clk1, &per4_clk);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
|
||||
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
|
||||
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
|
||||
|
|
|
|||
|
|
@ -404,7 +404,7 @@ DEFINE_CLOCK(gpu2d_clk, 0, CCM_CGR3, 4, NULL, NULL);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
|
||||
_REGISTER_CLOCK(NULL, "ata", ata_clk)
|
||||
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
|
||||
|
|
|
|||
|
|
@ -516,7 +516,7 @@ DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
|
|||
.clk = &c, \
|
||||
},
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
_REGISTER_CLOCK(NULL, "emi", emi_clk)
|
||||
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
|
||||
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
|
||||
|
|
|
|||
|
|
@ -103,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
|
|||
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
|
||||
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
|
||||
/* DSS domain clocks */
|
||||
CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
|
||||
CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
|
||||
CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
|
||||
CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
|
||||
CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
|
||||
CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
|
||||
CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
|
||||
CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
|
||||
/* L3 domain clocks */
|
||||
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
|
||||
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
|
||||
|
|
@ -206,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
|
|||
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
|
||||
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
|
||||
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
|
||||
CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
|
||||
CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
|
||||
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
|
||||
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
|
||||
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
|
||||
|
|
|
|||
|
|
@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
|
|||
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
|
||||
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
|
||||
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
|
||||
CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
|
||||
CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
|
||||
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
|
||||
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
|
||||
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
|
||||
|
|
@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
|
|||
CLK("omap_rng", "ick", &rng_ick, CK_343X),
|
||||
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
|
||||
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
|
||||
CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
|
||||
CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
|
||||
CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
|
||||
CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
|
||||
CLK(NULL, "dss_ick", &dss_ick, CK_343X),
|
||||
CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
|
||||
CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
|
||||
CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
|
||||
CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
|
||||
CLK("omapfb", "ick", &dss_ick, CK_343X),
|
||||
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
|
||||
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
|
||||
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
|
||||
|
|
|
|||
|
|
@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
|
|||
|
||||
static struct clk gpio1_dbck = {
|
||||
.name = "gpio1_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &wkup_32k_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
|
||||
|
|
@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
|
|||
|
||||
static struct clk gpio6_dbck = {
|
||||
.name = "gpio6_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &per_32k_alwon_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
|
||||
|
|
@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
|
|||
|
||||
static struct clk gpio5_dbck = {
|
||||
.name = "gpio5_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &per_32k_alwon_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
|
||||
|
|
@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
|
|||
|
||||
static struct clk gpio4_dbck = {
|
||||
.name = "gpio4_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &per_32k_alwon_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
|
||||
|
|
@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
|
|||
|
||||
static struct clk gpio3_dbck = {
|
||||
.name = "gpio3_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &per_32k_alwon_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
|
||||
|
|
@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
|
|||
|
||||
static struct clk gpio2_dbck = {
|
||||
.name = "gpio2_dbck",
|
||||
.ops = &clkops_omap2_dflt_wait,
|
||||
.ops = &clkops_omap2_dflt,
|
||||
.parent = &per_32k_alwon_fck,
|
||||
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
|
||||
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
|
||||
|
|
|
|||
|
|
@ -354,10 +354,12 @@ static void omap_init_mcspi(void)
|
|||
platform_device_register(&omap2_mcspi1);
|
||||
platform_device_register(&omap2_mcspi2);
|
||||
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
|
||||
platform_device_register(&omap2_mcspi3);
|
||||
if (cpu_is_omap2430() || cpu_is_omap343x())
|
||||
platform_device_register(&omap2_mcspi3);
|
||||
#endif
|
||||
#ifdef CONFIG_ARCH_OMAP3
|
||||
platform_device_register(&omap2_mcspi4);
|
||||
if (cpu_is_omap343x())
|
||||
platform_device_register(&omap2_mcspi4);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -409,7 +409,7 @@
|
|||
/* PM_PREPWSTST_CAM specific bits */
|
||||
|
||||
/* PM_PWSTCTRL_USBHOST specific bits */
|
||||
#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4)
|
||||
#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4
|
||||
|
||||
/* RM_RSTST_PER specific bits */
|
||||
|
||||
|
|
|
|||
|
|
@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
|
|||
unsigned sysclk_ps;
|
||||
int status;
|
||||
|
||||
if (!refclk_psec || sysclk_ps == 0)
|
||||
if (!refclk_psec || fclk_ps == 0)
|
||||
return -ENODEV;
|
||||
|
||||
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
|
||||
|
|
|
|||
|
|
@ -188,6 +188,9 @@ static struct platform_device orion5x_eth = {
|
|||
.id = 0,
|
||||
.num_resources = 1,
|
||||
.resource = orion5x_eth_resources,
|
||||
.dev = {
|
||||
.coherent_dma_mask = 0xffffffff,
|
||||
},
|
||||
};
|
||||
|
||||
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
|
||||
|
|
@ -248,12 +251,10 @@ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = {
|
|||
|
||||
static struct resource orion5x_i2c_resources[] = {
|
||||
{
|
||||
.name = "i2c base",
|
||||
.start = I2C_PHYS_BASE,
|
||||
.end = I2C_PHYS_BASE + 0x1f,
|
||||
.flags = IORESOURCE_MEM,
|
||||
}, {
|
||||
.name = "i2c irq",
|
||||
.start = IRQ_ORION5X_I2C,
|
||||
.end = IRQ_ORION5X_I2C,
|
||||
.flags = IORESOURCE_IRQ,
|
||||
|
|
|
|||
|
|
@ -72,7 +72,10 @@ void __init pxa_set_mci_info(struct pxamci_platform_data *info)
|
|||
}
|
||||
|
||||
|
||||
static struct pxa2xx_udc_mach_info pxa_udc_info;
|
||||
static struct pxa2xx_udc_mach_info pxa_udc_info = {
|
||||
.gpio_pullup = -1,
|
||||
.gpio_vbus = -1,
|
||||
};
|
||||
|
||||
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -111,9 +111,9 @@ static unsigned long ezx_pin_config[] __initdata = {
|
|||
GPIO25_SSP1_TXD,
|
||||
GPIO26_SSP1_RXD,
|
||||
GPIO24_GPIO, /* pcap chip select */
|
||||
GPIO1_GPIO, /* pcap interrupt */
|
||||
GPIO4_GPIO, /* WDI_AP */
|
||||
GPIO55_GPIO, /* SYS_RESTART */
|
||||
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
|
||||
GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
|
||||
GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
|
||||
|
||||
/* MMC */
|
||||
GPIO32_MMC_CLK,
|
||||
|
|
@ -144,20 +144,20 @@ static unsigned long ezx_pin_config[] __initdata = {
|
|||
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
|
||||
static unsigned long gen1_pin_config[] __initdata = {
|
||||
/* flip / lockswitch */
|
||||
GPIO12_GPIO,
|
||||
GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* bluetooth (bcm2035) */
|
||||
GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
|
||||
GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
|
||||
GPIO48_GPIO, /* RESET */
|
||||
GPIO28_GPIO, /* WAKEUP */
|
||||
|
||||
/* Neptune handshake */
|
||||
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
|
||||
GPIO57_GPIO, /* AP_RDY */
|
||||
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
|
||||
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
|
||||
GPIO82_GPIO, /* RESET */
|
||||
GPIO99_GPIO, /* TC_MM_EN */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
|
||||
GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
|
||||
GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
|
||||
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
|
||||
GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
|
||||
GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
|
||||
|
||||
/* sound */
|
||||
GPIO52_SSP3_SCLK,
|
||||
|
|
@ -199,21 +199,21 @@ static unsigned long gen1_pin_config[] __initdata = {
|
|||
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
|
||||
static unsigned long gen2_pin_config[] __initdata = {
|
||||
/* flip / lockswitch */
|
||||
GPIO15_GPIO,
|
||||
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
|
||||
/* EOC */
|
||||
GPIO10_GPIO,
|
||||
GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
|
||||
|
||||
/* bluetooth (bcm2045) */
|
||||
GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
|
||||
GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
|
||||
GPIO37_GPIO, /* RESET */
|
||||
GPIO57_GPIO, /* WAKEUP */
|
||||
|
||||
/* Neptune handshake */
|
||||
GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
|
||||
GPIO96_GPIO, /* AP_RDY */
|
||||
GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
|
||||
GPIO116_GPIO, /* RESET */
|
||||
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
|
||||
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
|
||||
GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
|
||||
GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
|
||||
GPIO41_GPIO, /* BP_FLASH */
|
||||
|
||||
/* sound */
|
||||
|
|
|
|||
|
|
@ -412,7 +412,7 @@ static struct platform_device imote2_flash_device = {
|
|||
*/
|
||||
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
|
||||
{ /* UCAM sensor board */
|
||||
.type = "max1238",
|
||||
.type = "max1239",
|
||||
.addr = 0x35,
|
||||
}, { /* ITS400 Sensor board only */
|
||||
.type = "max1363",
|
||||
|
|
|
|||
|
|
@ -13,8 +13,9 @@ extern void clear_reset_status(unsigned int mask);
|
|||
/**
|
||||
* init_gpio_reset() - register GPIO as reset generator
|
||||
* @gpio: gpio nr
|
||||
* @output: set gpio as out/low instead of input during normal work
|
||||
* @output: set gpio as output instead of input during normal work
|
||||
* @level: output level
|
||||
*/
|
||||
extern int init_gpio_reset(int gpio, int output);
|
||||
extern int init_gpio_reset(int gpio, int output, int level);
|
||||
|
||||
#endif /* __ASM_ARCH_RESET_H */
|
||||
|
|
|
|||
|
|
@ -322,6 +322,7 @@ static inline void pxa27x_mfp_init(void) {}
|
|||
#ifdef CONFIG_PM
|
||||
static unsigned long saved_gafr[2][4];
|
||||
static unsigned long saved_gpdr[4];
|
||||
static unsigned long saved_pgsr[4];
|
||||
|
||||
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
||||
{
|
||||
|
|
@ -332,6 +333,7 @@ static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
|
|||
saved_gafr[0][i] = GAFR_L(i);
|
||||
saved_gafr[1][i] = GAFR_U(i);
|
||||
saved_gpdr[i] = GPDR(i * 32);
|
||||
saved_pgsr[i] = PGSR(i);
|
||||
|
||||
GPDR(i * 32) = gpdr_lpm[i];
|
||||
}
|
||||
|
|
@ -346,6 +348,7 @@ static int pxa2xx_mfp_resume(struct sys_device *d)
|
|||
GAFR_L(i) = saved_gafr[0][i];
|
||||
GAFR_U(i) = saved_gafr[1][i];
|
||||
GPDR(i * 32) = saved_gpdr[i];
|
||||
PGSR(i) = saved_pgsr[i];
|
||||
}
|
||||
PSSR = PSSR_RDH | PSSR_PH;
|
||||
return 0;
|
||||
|
|
@ -374,6 +377,9 @@ static int __init pxa2xx_mfp_init(void)
|
|||
if (cpu_is_pxa27x())
|
||||
pxa27x_mfp_init();
|
||||
|
||||
/* clear RDH bit to enable GPIO receivers after reset/sleep exit */
|
||||
PSSR = PSSR_RDH;
|
||||
|
||||
/* initialize gafr_run[], pgsr_lpm[] from existing values */
|
||||
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
|
||||
gpdr_lpm[i] = GPDR(i * 32);
|
||||
|
|
|
|||
|
|
@ -62,6 +62,8 @@ static unsigned long palmld_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
GPIO108_GPIO, /* ir disable */
|
||||
|
|
|
|||
|
|
@ -64,6 +64,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
|
|
|
|||
|
|
@ -65,6 +65,7 @@ static unsigned long palmtx_pin_config[] __initdata = {
|
|||
GPIO29_AC97_SDATA_IN_0,
|
||||
GPIO30_AC97_SDATA_OUT,
|
||||
GPIO31_AC97_SYNC,
|
||||
GPIO89_AC97_SYSCLK,
|
||||
GPIO95_AC97_nRESET,
|
||||
|
||||
/* IrDA */
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@ static void do_hw_reset(void);
|
|||
|
||||
static int reset_gpio = -1;
|
||||
|
||||
int init_gpio_reset(int gpio, int output)
|
||||
int init_gpio_reset(int gpio, int output, int level)
|
||||
{
|
||||
int rc;
|
||||
|
||||
|
|
@ -31,7 +31,7 @@ int init_gpio_reset(int gpio, int output)
|
|||
}
|
||||
|
||||
if (output)
|
||||
rc = gpio_direction_output(gpio, 0);
|
||||
rc = gpio_direction_output(gpio, level);
|
||||
else
|
||||
rc = gpio_direction_input(gpio);
|
||||
if (rc) {
|
||||
|
|
|
|||
|
|
@ -531,9 +531,15 @@ static int spitz_ohci_init(struct device *dev)
|
|||
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
|
||||
}
|
||||
|
||||
static void spitz_ohci_exit(struct device *dev)
|
||||
{
|
||||
gpio_free(SPITZ_GPIO_USB_HOST);
|
||||
}
|
||||
|
||||
static struct pxaohci_platform_data spitz_ohci_platform_data = {
|
||||
.port_mode = PMM_NPS_MODE,
|
||||
.init = spitz_ohci_init,
|
||||
.exit = spitz_ohci_exit,
|
||||
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
|
||||
.power_budget = 150,
|
||||
};
|
||||
|
|
@ -731,7 +737,7 @@ static void spitz_restart(char mode, const char *cmd)
|
|||
|
||||
static void __init common_init(void)
|
||||
{
|
||||
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
|
||||
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
|
||||
pm_power_off = spitz_poweroff;
|
||||
arm_pm_restart = spitz_restart;
|
||||
|
||||
|
|
|
|||
|
|
@ -897,7 +897,7 @@ static void __init tosa_init(void)
|
|||
gpio_set_wake(MFP_PIN_GPIO1, 1);
|
||||
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
|
||||
|
||||
init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
|
||||
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
|
||||
|
||||
pm_power_off = tosa_poweroff;
|
||||
arm_pm_restart = tosa_restart;
|
||||
|
|
|
|||
|
|
@ -46,6 +46,7 @@
|
|||
#include <mach/audio.h>
|
||||
#include <mach/pxafb.h>
|
||||
#include <mach/i2c.h>
|
||||
#include <mach/regs-uart.h>
|
||||
#include <mach/viper.h>
|
||||
|
||||
#include <asm/setup.h>
|
||||
|
|
|
|||
|
|
@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
|
|||
{
|
||||
u32 val;
|
||||
|
||||
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
|
||||
/*
|
||||
* The dummy clock device has to be registered before the main device
|
||||
* so that the latter will broadcast the clock events
|
||||
*/
|
||||
local_timer_setup();
|
||||
#endif
|
||||
|
||||
/*
|
||||
* set clock frequency:
|
||||
* REALVIEW_REFCLK is 32KHz
|
||||
|
|
|
|||
|
|
@ -15,16 +15,9 @@
|
|||
/*
|
||||
* We use IRQ1 as the IPI
|
||||
*/
|
||||
static inline void smp_cross_call(cpumask_t callmap)
|
||||
{
|
||||
gic_raise_softirq(callmap, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Do nothing on MPcore.
|
||||
*/
|
||||
static inline void smp_cross_call_done(cpumask_t callmap)
|
||||
static inline void smp_cross_call(const struct cpumask *mask)
|
||||
{
|
||||
gic_raise_softirq(mask, 1);
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
|
|||
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
|
||||
|
||||
clk->name = "dummy_timer";
|
||||
clk->features = CLOCK_EVT_FEAT_DUMMY;
|
||||
clk->rating = 200;
|
||||
clk->features = CLOCK_EVT_FEAT_ONESHOT |
|
||||
CLOCK_EVT_FEAT_PERIODIC |
|
||||
CLOCK_EVT_FEAT_DUMMY;
|
||||
clk->rating = 400;
|
||||
clk->mult = 1;
|
||||
clk->set_mode = dummy_timer_set_mode;
|
||||
clk->broadcast = smp_timer_broadcast;
|
||||
|
|
|
|||
|
|
@ -77,13 +77,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
|
|||
{
|
||||
trace_hardirqs_off();
|
||||
|
||||
/*
|
||||
* the primary core may have used a "cross call" soft interrupt
|
||||
* to get this processor out of WFI in the BootMonitor - make
|
||||
* sure that we are no longer being sent this soft interrupt
|
||||
*/
|
||||
smp_cross_call_done(cpumask_of_cpu(cpu));
|
||||
|
||||
/*
|
||||
* if any interrupts are already enabled for the primary
|
||||
* core (e.g. timer irq), then they will not have been enabled
|
||||
|
|
@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
|
|||
* Use smp_cross_call() for this, since there's little
|
||||
* point duplicating the code here
|
||||
*/
|
||||
smp_cross_call(cpumask_of_cpu(cpu));
|
||||
smp_cross_call(cpumask_of(cpu));
|
||||
|
||||
timeout = jiffies + (1 * HZ);
|
||||
while (time_before(jiffies, timeout)) {
|
||||
|
|
@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
|
|||
if (max_cpus > ncores)
|
||||
max_cpus = ncores;
|
||||
|
||||
#ifdef CONFIG_LOCAL_TIMERS
|
||||
#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
|
||||
/*
|
||||
* Enable the local timer for primary CPU. If the device is
|
||||
* dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
|
||||
* realview_timer_init
|
||||
* Enable the local timer or broadcast device for the boot CPU.
|
||||
*/
|
||||
local_timer_setup();
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -588,8 +588,6 @@ static void __init bast_map_io(void)
|
|||
|
||||
s3c_device_nand.dev.platform_data = &bast_nand_info;
|
||||
|
||||
s3c_i2c0_set_platdata(&bast_i2c_info);
|
||||
|
||||
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
|
||||
s3c24xx_init_clocks(0);
|
||||
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
|
||||
|
|
@ -602,6 +600,7 @@ static void __init bast_init(void)
|
|||
sysdev_class_register(&bast_pm_sysclass);
|
||||
sysdev_register(&bast_pm_sysdev);
|
||||
|
||||
s3c_i2c0_set_platdata(&bast_i2c_info);
|
||||
s3c24xx_fb_set_platdata(&bast_fb_info);
|
||||
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
|
||||
|
||||
|
|
|
|||
|
|
@ -413,7 +413,7 @@ static struct clk ref24_clk = {
|
|||
.rate = 24000000,
|
||||
};
|
||||
|
||||
static struct clk_lookup lookups[] __initdata = {
|
||||
static struct clk_lookup lookups[] = {
|
||||
{ /* UART0 */
|
||||
.dev_id = "dev:f1",
|
||||
.clk = &ref24_clk,
|
||||
|
|
|
|||
|
|
@ -184,23 +184,37 @@ __v7_setup:
|
|||
stmia r12, {r0-r5, r7, r9, r11, lr}
|
||||
bl v7_flush_dcache_all
|
||||
ldmia r12, {r0-r5, r7, r9, r11, lr}
|
||||
|
||||
mrc p15, 0, r0, c0, c0, 0 @ read main ID register
|
||||
and r10, r0, #0xff000000 @ ARM?
|
||||
teq r10, #0x41000000
|
||||
bne 2f
|
||||
and r5, r0, #0x00f00000 @ variant
|
||||
and r6, r0, #0x0000000f @ revision
|
||||
orr r0, r6, r5, lsr #20-4 @ combine variant and revision
|
||||
|
||||
#ifdef CONFIG_ARM_ERRATA_430973
|
||||
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orr r10, r10, #(1 << 6) @ set IBE to 1
|
||||
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
teq r5, #0x00100000 @ only present in r1p*
|
||||
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orreq r10, r10, #(1 << 6) @ set IBE to 1
|
||||
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
#endif
|
||||
#ifdef CONFIG_ARM_ERRATA_458693
|
||||
mrc p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orr r10, r10, #(1 << 5) @ set L1NEON to 1
|
||||
orr r10, r10, #(1 << 9) @ set PLDNOP to 1
|
||||
mcr p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
teq r0, #0x20 @ only present in r2p0
|
||||
mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
|
||||
orreq r10, r10, #(1 << 5) @ set L1NEON to 1
|
||||
orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
|
||||
mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
|
||||
#endif
|
||||
#ifdef CONFIG_ARM_ERRATA_460075
|
||||
mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
||||
orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
||||
mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
||||
teq r0, #0x20 @ only present in r2p0
|
||||
mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
|
||||
tsteq r10, #1 << 22
|
||||
orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
|
||||
mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
|
||||
#endif
|
||||
mov r10, #0
|
||||
|
||||
2: mov r10, #0
|
||||
#ifdef HARVARD_CACHE
|
||||
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
|
|||
extern unsigned int DoubleCPDO(struct roundingData *roundData,
|
||||
const unsigned int opcode, FPREG * rFd);
|
||||
|
||||
/* extneded_cpdo.c */
|
||||
extern unsigned int ExtendedCPDO(struct roundingData *roundData,
|
||||
const unsigned int opcode, FPREG * rFd);
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -27,10 +27,6 @@
|
|||
#include "fpmodule.inl"
|
||||
#include "softfloat.h"
|
||||
|
||||
#ifdef CONFIG_FPE_NWFPE_XP
|
||||
extern flag floatx80_is_nan(floatx80);
|
||||
#endif
|
||||
|
||||
unsigned int PerformFLT(const unsigned int opcode);
|
||||
unsigned int PerformFIX(const unsigned int opcode);
|
||||
|
||||
|
|
|
|||
|
|
@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
|
|||
char floatx80_lt_quiet( floatx80, floatx80 );
|
||||
char floatx80_is_signaling_nan( floatx80 );
|
||||
|
||||
extern flag floatx80_is_nan(floatx80);
|
||||
|
||||
#endif
|
||||
|
||||
static inline flag extractFloat32Sign(float32 a)
|
||||
|
|
|
|||
|
|
@ -20,11 +20,16 @@
|
|||
#define ASMARM_ARCH_UART_H
|
||||
|
||||
#define IMXUART_HAVE_RTSCTS (1<<0)
|
||||
#define IMXUART_IRDA (1<<1)
|
||||
|
||||
struct imxuart_platform_data {
|
||||
int (*init)(struct platform_device *pdev);
|
||||
int (*exit)(struct platform_device *pdev);
|
||||
unsigned int flags;
|
||||
void (*irda_enable)(int enable);
|
||||
unsigned int irda_inv_rx:1;
|
||||
unsigned int irda_inv_tx:1;
|
||||
unsigned short transceiver_delay;
|
||||
};
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
|
|||
config_invalid = 1;
|
||||
return;
|
||||
}
|
||||
if (rg.paddr)
|
||||
if (rg.paddr) {
|
||||
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
|
||||
reserved += rg.size;
|
||||
reserved += rg.size;
|
||||
}
|
||||
omapfb_config.mem_desc.region[i] = rg;
|
||||
configured_regions++;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
|
|||
return 0;
|
||||
if (cpu_is_omap24xx() && gpio < 128)
|
||||
return 0;
|
||||
if (cpu_is_omap34xx() && gpio < 160)
|
||||
if (cpu_is_omap34xx() && gpio < 192)
|
||||
return 0;
|
||||
return -1;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -147,24 +147,40 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
|
|||
return ret;
|
||||
}
|
||||
|
||||
struct omap_msg_tx_data {
|
||||
mbox_msg_t msg;
|
||||
void *arg;
|
||||
};
|
||||
|
||||
static void omap_msg_tx_end_io(struct request *rq, int error)
|
||||
{
|
||||
kfree(rq->special);
|
||||
__blk_put_request(rq->q, rq);
|
||||
}
|
||||
|
||||
int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
|
||||
{
|
||||
struct omap_msg_tx_data *tx_data;
|
||||
struct request *rq;
|
||||
struct request_queue *q = mbox->txq->queue;
|
||||
int ret = 0;
|
||||
|
||||
tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
|
||||
if (unlikely(!tx_data))
|
||||
return -ENOMEM;
|
||||
|
||||
rq = blk_get_request(q, WRITE, GFP_ATOMIC);
|
||||
if (unlikely(!rq)) {
|
||||
ret = -ENOMEM;
|
||||
goto fail;
|
||||
kfree(tx_data);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
rq->data = (void *)msg;
|
||||
blk_insert_request(q, rq, 0, arg);
|
||||
tx_data->msg = msg;
|
||||
tx_data->arg = arg;
|
||||
rq->end_io = omap_msg_tx_end_io;
|
||||
blk_insert_request(q, rq, 0, tx_data);
|
||||
|
||||
schedule_work(&mbox->txq->work);
|
||||
fail:
|
||||
return ret;
|
||||
return 0;
|
||||
}
|
||||
EXPORT_SYMBOL(omap_mbox_msg_send);
|
||||
|
||||
|
|
@ -178,22 +194,28 @@ static void mbox_tx_work(struct work_struct *work)
|
|||
struct request_queue *q = mbox->txq->queue;
|
||||
|
||||
while (1) {
|
||||
struct omap_msg_tx_data *tx_data;
|
||||
|
||||
spin_lock(q->queue_lock);
|
||||
rq = elv_next_request(q);
|
||||
rq = blk_fetch_request(q);
|
||||
spin_unlock(q->queue_lock);
|
||||
|
||||
if (!rq)
|
||||
break;
|
||||
|
||||
ret = __mbox_msg_send(mbox, (mbox_msg_t) rq->data, rq->special);
|
||||
tx_data = rq->special;
|
||||
|
||||
ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
|
||||
if (ret) {
|
||||
enable_mbox_irq(mbox, IRQ_TX);
|
||||
spin_lock(q->queue_lock);
|
||||
blk_requeue_request(q, rq);
|
||||
spin_unlock(q->queue_lock);
|
||||
return;
|
||||
}
|
||||
|
||||
spin_lock(q->queue_lock);
|
||||
if (__blk_end_request(rq, 0, 0))
|
||||
BUG();
|
||||
__blk_end_request_all(rq, 0);
|
||||
spin_unlock(q->queue_lock);
|
||||
}
|
||||
}
|
||||
|
|
@ -218,16 +240,13 @@ static void mbox_rx_work(struct work_struct *work)
|
|||
|
||||
while (1) {
|
||||
spin_lock_irqsave(q->queue_lock, flags);
|
||||
rq = elv_next_request(q);
|
||||
rq = blk_fetch_request(q);
|
||||
spin_unlock_irqrestore(q->queue_lock, flags);
|
||||
if (!rq)
|
||||
break;
|
||||
|
||||
msg = (mbox_msg_t) rq->data;
|
||||
|
||||
if (blk_end_request(rq, 0, 0))
|
||||
BUG();
|
||||
|
||||
msg = (mbox_msg_t)rq->special;
|
||||
blk_end_request_all(rq, 0);
|
||||
mbox->rxq->callback((void *)msg);
|
||||
}
|
||||
}
|
||||
|
|
@ -264,7 +283,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
|
|||
goto nomem;
|
||||
|
||||
msg = mbox_fifo_read(mbox);
|
||||
rq->data = (void *)msg;
|
||||
|
||||
if (unlikely(mbox_seq_test(mbox, msg))) {
|
||||
pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
|
||||
|
|
@ -272,7 +290,7 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
|
|||
mbox->err_notify();
|
||||
}
|
||||
|
||||
blk_insert_request(q, rq, 0, NULL);
|
||||
blk_insert_request(q, rq, 0, (void *)msg);
|
||||
if (mbox->ops->type == OMAP_MBOX_TYPE1)
|
||||
break;
|
||||
}
|
||||
|
|
@ -329,16 +347,15 @@ omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
|
|||
|
||||
while (1) {
|
||||
spin_lock_irqsave(q->queue_lock, flags);
|
||||
rq = elv_next_request(q);
|
||||
rq = blk_fetch_request(q);
|
||||
spin_unlock_irqrestore(q->queue_lock, flags);
|
||||
|
||||
if (!rq)
|
||||
break;
|
||||
|
||||
*p = (mbox_msg_t) rq->data;
|
||||
*p = (mbox_msg_t)rq->special;
|
||||
|
||||
if (blk_end_request(rq, 0, 0))
|
||||
BUG();
|
||||
blk_end_request_all(rq, 0);
|
||||
|
||||
if (unlikely(mbox_seq_test(mbox, *p))) {
|
||||
pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
|
||||
|
|
|
|||
|
|
@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
|
|||
|
||||
int s3c24xx_register_clock(struct clk *clk)
|
||||
{
|
||||
clk->owner = THIS_MODULE;
|
||||
|
||||
if (clk->enable == NULL)
|
||||
clk->enable = clk_null_enable;
|
||||
|
||||
|
|
|
|||
|
|
@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
|
|||
|
||||
EXPORT_SYMBOL(s3c2410_dma_getposition);
|
||||
|
||||
static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
|
||||
static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
|
||||
{
|
||||
return container_of(dev, struct s3c2410_dma_chan, dev);
|
||||
}
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue