dect
/
linux-2.6
Archived
13
0
Fork 0

Added kernel support in EEE Ethtool commands

This patch extends the kernel's ethtool interface by adding support
for 2 new EEE commands - get_eee and set_eee.

Thanks goes to Giuseppe Cavallaro for his original patch adding this support.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Yuval Mintz 2012-06-06 17:13:06 +00:00 committed by David S. Miller
parent 94b6042cfe
commit 80f12eccce
2 changed files with 75 additions and 0 deletions

View File

@ -136,6 +136,35 @@ struct ethtool_eeprom {
__u8 data[0];
};
/**
* struct ethtool_eee - Energy Efficient Ethernet information
* @cmd: ETHTOOL_{G,S}EEE
* @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
* for which there is EEE support.
* @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
* advertised as eee capable.
* @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
* combinations advertised by the link partner as eee capable.
* @eee_active: Result of the eee auto negotiation.
* @eee_enabled: EEE configured mode (enabled/disabled).
* @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
* that eee was negotiated.
* @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
* its tx lpi (after reaching 'idle' state). Effective only when eee
* was negotiated and tx_lpi_enabled was set.
*/
struct ethtool_eee {
__u32 cmd;
__u32 supported;
__u32 advertised;
__u32 lp_advertised;
__u32 eee_active;
__u32 eee_enabled;
__u32 tx_lpi_enabled;
__u32 tx_lpi_timer;
__u32 reserved[2];
};
/**
* struct ethtool_modinfo - plugin module eeprom information
* @cmd: %ETHTOOL_GMODULEINFO
@ -945,6 +974,8 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
* @get_module_info: Get the size and type of the eeprom contained within
* a plug-in module.
* @get_module_eeprom: Get the eeprom information from the plug-in module
* @get_eee: Get Energy-Efficient (EEE) supported and status.
* @set_eee: Set EEE status (enable/disable) as well as LPI timers.
*
* All operations are optional (i.e. the function pointer may be set
* to %NULL) and callers must take this into account. Callers must
@ -1011,6 +1042,8 @@ struct ethtool_ops {
struct ethtool_modinfo *);
int (*get_module_eeprom)(struct net_device *,
struct ethtool_eeprom *, u8 *);
int (*get_eee)(struct net_device *, struct ethtool_eee *);
int (*set_eee)(struct net_device *, struct ethtool_eee *);
};
@ -1089,6 +1122,8 @@ struct ethtool_ops {
#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
/* compatibility with older code */
#define SPARC_ETH_GSET ETHTOOL_GSET

View File

@ -729,6 +729,40 @@ static int ethtool_set_wol(struct net_device *dev, char __user *useraddr)
return dev->ethtool_ops->set_wol(dev, &wol);
}
static int ethtool_get_eee(struct net_device *dev, char __user *useraddr)
{
struct ethtool_eee edata;
int rc;
if (!dev->ethtool_ops->get_eee)
return -EOPNOTSUPP;
memset(&edata, 0, sizeof(struct ethtool_eee));
edata.cmd = ETHTOOL_GEEE;
rc = dev->ethtool_ops->get_eee(dev, &edata);
if (rc)
return rc;
if (copy_to_user(useraddr, &edata, sizeof(edata)))
return -EFAULT;
return 0;
}
static int ethtool_set_eee(struct net_device *dev, char __user *useraddr)
{
struct ethtool_eee edata;
if (!dev->ethtool_ops->set_eee)
return -EOPNOTSUPP;
if (copy_from_user(&edata, useraddr, sizeof(edata)))
return -EFAULT;
return dev->ethtool_ops->set_eee(dev, &edata);
}
static int ethtool_nway_reset(struct net_device *dev)
{
if (!dev->ethtool_ops->nway_reset)
@ -1471,6 +1505,12 @@ int dev_ethtool(struct net *net, struct ifreq *ifr)
rc = ethtool_set_value_void(dev, useraddr,
dev->ethtool_ops->set_msglevel);
break;
case ETHTOOL_GEEE:
rc = ethtool_get_eee(dev, useraddr);
break;
case ETHTOOL_SEEE:
rc = ethtool_set_eee(dev, useraddr);
break;
case ETHTOOL_NWAY_RST:
rc = ethtool_nway_reset(dev);
break;