dect
/
linux-2.6
Archived
13
0
Fork 0
Code Releases Activity

treewide: transciever/transceiver spelling fixes 

Just tyops.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Joe Perches 2011-06-23 11:39:20 -07:00 committed by Jiri Kosina
parent dbc6221be7
commit 7c9d440e90
12 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/mach-pxa/include/mach/corgi.h
View File

@ -34,7 +34,7 @@
#define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */
#define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */
#define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */
#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */
#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */
#define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */
#define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */
#define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */

4
arch/arm/mach-pxa/include/mach/pxa27x-udc.h
View File

@ -56,9 +56,9 @@
#define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */
#define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
Interrupt Enable */

2
arch/arm/mach-ux500/board-mop500-regulators.c
View File

@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
/* SoC core supply, no device */
REGULATOR_SUPPLY("v-intcore", NULL),
/* USB Transciever */
/* USB Transceiver */
REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
};

2
drivers/i2c/busses/i2c-highlander.c
View File

@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
/*
* The R0P7780LC0011RL FPGA needs a significant delay between
* data read cycles, otherwise the transciever gets confused and
* data read cycles, otherwise the transceiver gets confused and
* garbage is returned when the read is subsequently aborted.
*
* It is not sufficient to wait for BBSY.

2
drivers/net/eexpress.c
View File

@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
dev->irq = mca_irqmap[(pos1>>4)&0x7];
/*
* XXX: Transciever selection is done
* XXX: Transceiver selection is done
* differently on the MCA version.
* How to get it to select something
* other than external/AUI is currently

2
drivers/net/irda/toim3232-sir.c
View File

@ -78,7 +78,7 @@
* Target hardware: IRWave IR320ST-2
*
* The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
* TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
* TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
* It uses a hex inverter and some discrete components to buffer and
* line convert the RS232 down to 5V.
*

2
drivers/net/natsemi.c
View File

@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
/*
* If we're ignoring the PHY then autoneg and the internal
* transciever are really not going to work so don't let the
* transceiver are really not going to work so don't let the
* user select them.
*/
if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||

2
drivers/tty/serial/8250_pci.c
View File

@ -743,7 +743,7 @@ pci_ni8430_setup(struct serial_private *priv,
len = pci_resource_len(priv->dev, bar);
p = ioremap_nocache(base, len);
/* enable the transciever */
/* enable the transceiver */
writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
p + offset + NI8430_PORTCON);

4
drivers/usb/gadget/pxa27x_udc.h
View File

@ -88,9 +88,9 @@
#define UDCISR_INT_MASK (UDCICR_FIFOERR | UDCICR_PKTCOMPL)
#define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt
#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt
Rising Edge Interrupt Enable */
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt
#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt
Falling Edge Interrupt Enable */
#define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge
Interrupt Enable */

2
drivers/usb/musb/musb_core.c
View File

@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
* - initializes musb->xceiv, usually by otg_get_transceiver()
* - stops powering VBUS
*
* There are various transciever configurations. Blackfin,
* There are various transceiver configurations. Blackfin,
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
* external/discrete ones in various flavors (twl4030 family,
* isp1504, non-OTG, etc) mostly hooking up through ULPI.

4
drivers/usb/otg/isp1301_omap.c
View File

@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
int ret = IRQ_NONE;
struct isp1301 *isp = _isp;
/* update ISP1301 transciever from OTG controller */
/* update ISP1301 transceiver from OTG controller */
if (otg_irq & OPRT_CHG) {
omap_writew(OPRT_CHG, OTG_IRQ_SRC);
isp1301_defer_work(isp, WORK_UPDATE_ISP);
@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
/* switch driver; the transciever code activates it,
/* switch driver; the transceiver code activates it,
* ungating the udc clock or resuming OHCI.
*/
} else if (otg_irq & DRIVER_SWITCH) {

2
sound/pci/ice1712/ice1712.c
View File

@ -87,7 +87,7 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR; /* ID for this card */
static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card */
static char *model[SNDRV_CARDS];
static int omni[SNDRV_CARDS]; /* Delta44 & 66 Omni I/O support */
static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transciever reset timeout value in msec */
static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transceiver reset timeout value in msec */
static int dxr_enable[SNDRV_CARDS]; /* DXR enable for DMX6FIRE */
module_param_array(index, int, NULL, 0444);