Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ata_piix: The Sony TZ90 needs the cable type hardcoding ata_piix: ICH7 does not support correct MWDMA timings Avoid world-writable sysfs files in libata driver. libata: fix suspend/resume for ATA SEMB devices libata: clear ering on resume pata_pdc202xx_old: fix UDMA33 handling sata_mv: use new sata phy register settings for new devices libata: fix attach error handling
This commit is contained in:
commit
7b5ca22643
6 changed files with 120 additions and 15 deletions
|
@ -72,6 +72,7 @@
|
|||
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
|
||||
* and must be dword aligned
|
||||
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
|
||||
* ICH7 errata #16 - MWDMA1 timings are incorrect
|
||||
*
|
||||
* Should have been BIOS fixed:
|
||||
* 450NX: errata #19 - DMA hangs on old 450NX
|
||||
|
@ -94,7 +95,7 @@
|
|||
#include <linux/dmi.h>
|
||||
|
||||
#define DRV_NAME "ata_piix"
|
||||
#define DRV_VERSION "2.12"
|
||||
#define DRV_VERSION "2.13"
|
||||
|
||||
enum {
|
||||
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
|
||||
|
@ -136,6 +137,7 @@ enum piix_controller_ids {
|
|||
ich_pata_33, /* ICH up to UDMA 33 only */
|
||||
ich_pata_66, /* ICH up to 66 Mhz */
|
||||
ich_pata_100, /* ICH up to UDMA 100 */
|
||||
ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
|
||||
ich5_sata,
|
||||
ich6_sata,
|
||||
ich6m_sata,
|
||||
|
@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
|
|||
/* ICH6 (and 6) (i915) UDMA 100 */
|
||||
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
||||
/* ICH7/7-R (i945, i975) UDMA 100*/
|
||||
{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
||||
{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
||||
{ 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
|
||||
{ 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
|
||||
/* ICH8 Mobile PATA Controller */
|
||||
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
|
||||
|
||||
|
@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = {
|
|||
.port_ops = &ich_pata_ops,
|
||||
},
|
||||
|
||||
[ich_pata_100_nomwdma1] =
|
||||
{
|
||||
.flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
|
||||
.pio_mask = ATA_PIO4,
|
||||
.mwdma_mask = ATA_MWDMA2_ONLY,
|
||||
.udma_mask = ATA_UDMA5,
|
||||
.port_ops = &ich_pata_ops,
|
||||
},
|
||||
|
||||
[ich5_sata] =
|
||||
{
|
||||
.flags = PIIX_SATA_FLAGS,
|
||||
|
@ -594,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = {
|
|||
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
|
||||
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
|
||||
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
|
||||
{ 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
|
||||
/* end marker */
|
||||
{ 0, }
|
||||
};
|
||||
|
|
|
@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
|
|||
|
||||
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
|
||||
if (ata_class_enabled(new_class) &&
|
||||
new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
|
||||
new_class != ATA_DEV_ATA &&
|
||||
new_class != ATA_DEV_ATAPI &&
|
||||
new_class != ATA_DEV_SEMB) {
|
||||
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
|
||||
dev->class, new_class);
|
||||
rc = -ENODEV;
|
||||
|
|
|
@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
|
|||
} else if (dev->class == ATA_DEV_UNKNOWN &&
|
||||
ehc->tries[dev->devno] &&
|
||||
ata_class_enabled(ehc->classes[dev->devno])) {
|
||||
/* Temporarily set dev->class, it will be
|
||||
* permanently set once all configurations are
|
||||
* complete. This is necessary because new
|
||||
* device configuration is done in two
|
||||
* separate loops.
|
||||
*/
|
||||
dev->class = ehc->classes[dev->devno];
|
||||
|
||||
if (dev->class == ATA_DEV_PMP)
|
||||
|
@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
|
|||
else
|
||||
rc = ata_dev_read_id(dev, &dev->class,
|
||||
readid_flags, dev->id);
|
||||
|
||||
/* read_id might have changed class, store and reset */
|
||||
ehc->classes[dev->devno] = dev->class;
|
||||
dev->class = ATA_DEV_UNKNOWN;
|
||||
|
||||
switch (rc) {
|
||||
case 0:
|
||||
/* clear error info accumulated during probe */
|
||||
|
@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
|
|||
case -ENOENT:
|
||||
/* IDENTIFY was issued to non-existent
|
||||
* device. No need to reset. Just
|
||||
* thaw and kill the device.
|
||||
* thaw and ignore the device.
|
||||
*/
|
||||
ata_eh_thaw_port(ap);
|
||||
dev->class = ATA_DEV_UNKNOWN;
|
||||
break;
|
||||
default:
|
||||
dev->class = ATA_DEV_UNKNOWN;
|
||||
goto err;
|
||||
}
|
||||
}
|
||||
|
@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
|
|||
dev->class == ATA_DEV_PMP)
|
||||
continue;
|
||||
|
||||
dev->class = ehc->classes[dev->devno];
|
||||
|
||||
ehc->i.flags |= ATA_EHI_PRINTINFO;
|
||||
rc = ata_dev_configure(dev);
|
||||
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
|
||||
if (rc)
|
||||
if (rc) {
|
||||
dev->class = ATA_DEV_UNKNOWN;
|
||||
goto err;
|
||||
}
|
||||
|
||||
spin_lock_irqsave(ap->lock, flags);
|
||||
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
|
||||
|
@ -3494,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
|
|||
*/
|
||||
static void ata_eh_handle_port_resume(struct ata_port *ap)
|
||||
{
|
||||
struct ata_link *link;
|
||||
struct ata_device *dev;
|
||||
unsigned long flags;
|
||||
int rc = 0;
|
||||
|
||||
|
@ -3508,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
|
|||
|
||||
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
|
||||
|
||||
/*
|
||||
* Error timestamps are in jiffies which doesn't run while
|
||||
* suspended and PHY events during resume isn't too uncommon.
|
||||
* When the two are combined, it can lead to unnecessary speed
|
||||
* downs if the machine is suspended and resumed repeatedly.
|
||||
* Clear error history.
|
||||
*/
|
||||
ata_for_each_link(link, ap, HOST_FIRST)
|
||||
ata_for_each_dev(dev, link, ALL)
|
||||
ata_ering_clear(&dev->ering);
|
||||
|
||||
ata_acpi_set_state(ap, PMSG_ON);
|
||||
|
||||
if (ap->ops->port_resume)
|
||||
|
|
|
@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
|
|||
return ap->ops->em_show(ap, buf);
|
||||
return -EINVAL;
|
||||
}
|
||||
DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
|
||||
DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
|
||||
ata_scsi_em_message_show, ata_scsi_em_message_store);
|
||||
EXPORT_SYMBOL_GPL(dev_attr_em_message);
|
||||
|
||||
|
@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
|
|||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
|
||||
DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
|
||||
ata_scsi_activity_store);
|
||||
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
|
||||
|
||||
|
|
|
@ -2,7 +2,7 @@
|
|||
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
|
||||
* (C) 2005 Red Hat Inc
|
||||
* Alan Cox <alan@lxorguk.ukuu.org.uk>
|
||||
* (C) 2007 Bartlomiej Zolnierkiewicz
|
||||
* (C) 2007,2009 Bartlomiej Zolnierkiewicz
|
||||
*
|
||||
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
|
||||
*
|
||||
|
@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
|
|||
u32 len;
|
||||
|
||||
/* Check we keep host level locking here */
|
||||
if (adev->dma_mode >= XFER_UDMA_2)
|
||||
if (adev->dma_mode > XFER_UDMA_2)
|
||||
iowrite8(ioread8(clock) | sel66, clock);
|
||||
else
|
||||
iowrite8(ioread8(clock) & ~sel66, clock);
|
||||
|
@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
|
|||
iowrite8(ioread8(clock) & ~sel66, clock);
|
||||
}
|
||||
/* Flip back to 33Mhz for PIO */
|
||||
if (adev->dma_mode >= XFER_UDMA_2)
|
||||
if (adev->dma_mode > XFER_UDMA_2)
|
||||
iowrite8(ioread8(clock) & ~sel66, clock);
|
||||
ata_bmdma_stop(qc);
|
||||
pdc202xx_set_piomode(ap, adev);
|
||||
|
|
|
@ -293,6 +293,10 @@ enum {
|
|||
FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
|
||||
FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
|
||||
|
||||
PHY_MODE9_GEN2 = 0x398,
|
||||
PHY_MODE9_GEN1 = 0x39c,
|
||||
PHYCFG_OFS = 0x3a0, /* only in 65n devices */
|
||||
|
||||
MV5_PHY_MODE = 0x74,
|
||||
MV5_LTMODE = 0x30,
|
||||
MV5_PHY_CTL = 0x0C,
|
||||
|
@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
|
|||
static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
|
||||
void __iomem *mmio);
|
||||
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
|
||||
static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
|
||||
void __iomem *mmio, unsigned int port);
|
||||
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
|
||||
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
|
||||
unsigned int port_no);
|
||||
|
@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = {
|
|||
.reset_bus = mv_soc_reset_bus,
|
||||
};
|
||||
|
||||
static const struct mv_hw_ops mv_soc_65n_ops = {
|
||||
.phy_errata = mv_soc_65n_phy_errata,
|
||||
.enable_leds = mv_soc_enable_leds,
|
||||
.reset_hc = mv_soc_reset_hc,
|
||||
.reset_flash = mv_soc_reset_flash,
|
||||
.reset_bus = mv_soc_reset_bus,
|
||||
};
|
||||
|
||||
/*
|
||||
* Functions
|
||||
*/
|
||||
|
@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
|
|||
return;
|
||||
}
|
||||
|
||||
static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
|
||||
void __iomem *mmio, unsigned int port)
|
||||
{
|
||||
void __iomem *port_mmio = mv_port_base(mmio, port);
|
||||
u32 reg;
|
||||
|
||||
reg = readl(port_mmio + PHY_MODE3);
|
||||
reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
|
||||
reg |= (0x1 << 27);
|
||||
reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
|
||||
reg |= (0x1 << 29);
|
||||
writel(reg, port_mmio + PHY_MODE3);
|
||||
|
||||
reg = readl(port_mmio + PHY_MODE4);
|
||||
reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
|
||||
reg |= (0x1 << 16);
|
||||
writel(reg, port_mmio + PHY_MODE4);
|
||||
|
||||
reg = readl(port_mmio + PHY_MODE9_GEN2);
|
||||
reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
|
||||
reg |= 0x8;
|
||||
reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
|
||||
writel(reg, port_mmio + PHY_MODE9_GEN2);
|
||||
|
||||
reg = readl(port_mmio + PHY_MODE9_GEN1);
|
||||
reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
|
||||
reg |= 0x8;
|
||||
reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
|
||||
writel(reg, port_mmio + PHY_MODE9_GEN1);
|
||||
}
|
||||
|
||||
/**
|
||||
* soc_is_65 - check if the soc is 65 nano device
|
||||
*
|
||||
* Detect the type of the SoC, this is done by reading the PHYCFG_OFS
|
||||
* register, this register should contain non-zero value and it exists only
|
||||
* in the 65 nano devices, when reading it from older devices we get 0.
|
||||
*/
|
||||
static bool soc_is_65n(struct mv_host_priv *hpriv)
|
||||
{
|
||||
void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
|
||||
|
||||
if (readl(port0_mmio + PHYCFG_OFS))
|
||||
return true;
|
||||
return false;
|
||||
}
|
||||
|
||||
static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
|
||||
{
|
||||
u32 ifcfg = readl(port_mmio + SATA_IFCFG);
|
||||
|
@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
|
|||
}
|
||||
break;
|
||||
case chip_soc:
|
||||
hpriv->ops = &mv_soc_ops;
|
||||
if (soc_is_65n(hpriv))
|
||||
hpriv->ops = &mv_soc_65n_ops;
|
||||
else
|
||||
hpriv->ops = &mv_soc_ops;
|
||||
hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
|
||||
MV_HP_ERRATA_60X1C0;
|
||||
break;
|
||||
|
@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
|
|||
n_hc = mv_get_hc_count(host->ports[0]->flags);
|
||||
|
||||
for (port = 0; port < host->n_ports; port++)
|
||||
hpriv->ops->read_preamp(hpriv, port, mmio);
|
||||
if (hpriv->ops->read_preamp)
|
||||
hpriv->ops->read_preamp(hpriv, port, mmio);
|
||||
|
||||
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
|
||||
if (rc)
|
||||
|
|
Reference in a new issue